Integration of pH Control into Chi.Bio Reactors and Demonstration with Small-Scale Enzymatic Poly(ethylene terephthalate) Hydrolysis.

Small-scale bioreactors that are affordable and accessible would be of major benefit to the research community. In previous work, an open-source, automated bioreactor system was designed to operate up to the 30 mL scale with online optical monitoring, stirring, and temperature control, and this system, dubbed Chi.Bio, is now commercially available at a cost that is typically 1-2 orders of magnitude less than commercial bioreactors. In this work, we further expand the capabilities of the Chi.Bio system by enabling continuous pH monitoring and control through hardware and software modifications. For hardware modifications, we sourced low-cost, commercial pH circuits and made straightforward modifications to the Chi.Bio head plate to enable continuous pH monitoring. For software integration, we introduced closed-loop feedback control of the pH measured inside the Chi.Bio reactors and integrated a pH-control module into the existing Chi.Bio user interface. We demonstrated the utility of pH control through the small-scale depolymerization of the synthetic polyester, poly(ethylene terephthalate) (PET), using a benchmark cutinase enzyme, and compared this to 250 mL bioreactor hydrolysis reactions. The results in terms of PET conversion and rate, measured both by base addition and product release profiles, are statistically equivalent, with the Chi.Bio system allowing for a 20-fold reduction of purified enzyme required relative to the 250 mL bioreactor setup. Through inexpensive modifications, the ability to conduct pH control in Chi.Bio reactors widens the potential slate of biochemical reactions and biological cultivations for study in this system, and may also be adapted for use in other bioreactor platforms.

Increasing the Soluble Expression and Whole-Cell Activity of the Plastic-Degrading Enzyme MHETase through Consensus Design.

The mono(2-hydroxyethyl) terephthalate hydrolase (MHETase) from Ideonella sakaiensis carries out the second step in the enzymatic depolymerization of poly(ethylene terephthalate) (PET) plastic into the monomers terephthalic acid (TPA) and ethylene glycol (EG). Despite its potential industrial and environmental applications, poor recombinant expression of MHETase has been an obstacle to its industrial application. To overcome this barrier, we developed an assay allowing for the medium-throughput quantification of MHETase activity in cell lysates and whole-cell suspensions, which allowed us to screen a library of engineered variants. Using consensus design, we generated several improved variants that exhibit over 10-fold greater whole-cell activity than wild-type (WT) MHETase. This is revealed to be largely due to increased soluble expression, which biochemical and structural analysis indicates is due to improved protein folding.

Molecular engineering of PETase for efficient PET biodegradation.

The widespread utilization of polyethylene terephthalate (PET) has caused a variety of environmental and health problems. Compared with traditional thermomechanical or chemical PET cycling, the biodegradation of PET may offer a more feasible solution. Though the PETase from Ideonalla sakaiensis (IsPETase) displays interesting PET degrading performance under mild conditions; the relatively low thermal stability of IsPETase limits its practical application. In this study, enzyme-catalysed PET degradation was investigated with the promising IsPETase mutant HotPETase (HP). On this basis, a carbohydrate-binding module from Bacillus anthracis (BaCBM) was fused to the C-terminus of HP to construct the PETase mutant (HLCB) for increased PET degradation. Furthermore, to effectively improve PET accessibility and PET-degrading activity, the truncated outer membrane hybrid protein (FadL) was used to expose PETase and BaCBM on the surface of E. coli (BL21with) to develop regenerable whole-cell biocatalysts (D-HLCB). Results showed that, among the tested small-molecular weight ester compounds (p-nitrophenyl phosphate (pNPP), p-Nitrophenyl acetate (pNPA), 4-Nitrophenyl butyrate (pNPB)), PETase displayed the highest hydrolysing activity against pNPP. HP displayed the highest catalytic activity (1.94 µM(p-NP)/min) at 50 °C and increased longevity at 40 °C. The fused BaCBM could clearly improve the catalytic performance of PETase by increasing the optimal reaction temperature and improving the thermostability. When HLCB was used for PET degradation, the yield of monomeric products (255.7 µM) was ∼25.5 % greater than that obtained after 50 h of HP-catalysed PET degradation. Moreover, the highest yield of monomeric products from the D-HLCB-mediated system reached 1.03 mM. The whole-cell catalyst D-HLCB displayed good reusability and stability and could maintain more than 54.6 % of its initial activity for nine cycles. Finally, molecular docking simulations were utilized to investigate the binding mechanism and the reaction mechanism of HLCB, which may provide theoretical evidence to further increase the PET-degrading activities of PETases through rational design. The proposed strategy and developed variants show potential for achieving complete biodegradation of PET under mild conditions.

Novel polyurethane-degrading cutinase BaCut1 from Blastobotrys sp. G-9 with potential role in plastic bio-recycling.

Environmental pollution caused by plastic waste has become global problem that needs to be considered urgently. In the pursuit of a circular plastic economy, biodegradation provides an attractive strategy for managing plastic wastes, whereas effective plastic-degrading microbes and enzymes are required. In this study, we report that Blastobotrys sp. G-9 isolated from discarded plastic in landfills is capable of depolymerizing polyurethanes (PU) and poly (butylene adipate-co-terephthalate) (PBAT). Strain G-9 degrades up to 60% of PU foam after 21 days of incubation at 28 â„ƒ by breaking down carbonyl groups via secretory hydrolase as confirmed by structural characterization of plastics and degradation products identification. Within the supernatant of strain G-9, we identify a novel cutinase BaCut1, belonging to the esterase family, that can reproduce the same effect. BaCut1 demonstrates efficient degradation toward commercial polyester plastics PU foam (0.5 mg enzyme/25 mg plastic) and agricultural film PBAT (0.5 mg enzyme/10 mg plastic) with 50% and 18% weight loss at 37 â„ƒ for 48 h, respectively. BaCut1 hydrolyzes PU into adipic acid as a major end-product with 42.9% recovery via ester bond cleavage, and visible biodegradation is also identified from PBAT, which is a beneficial feature for future recycling economy. Molecular docking, along with products distribution, elucidates a special substrate-binding modes of BaCut1 with plastic substrate analogue. BaCut1-mediated polyester plastic degradation offers an alternative approach for managing PU plastic wastes through possible bio-recycling.

Analysis of Poly(ethylene terephthalate) degradation kinetics of evolved IsPETase variants using a surface crowding model.

Poly(ethylene terephthalate) (PET) is a major plastic polymer utilized in the single-use and textile industries. The discovery of PET-degrading enzymes (PETases) has led to an increased interest in the biological recycling of PET in addition to mechanical recycling. IsPETase from Ideonella sakaiensis is a candidate catalyst, but little is understood about its structure-function relationships with regards to PET degradation. To understand the effects of mutations on IsPETase productivity, we develop a directed evolution assay to identify mutations beneficial to PET film degradation at 30 °C. IsPETase also displays enzyme concentration-dependent inhibition effects, and surface crowding has been proposed as a causal phenomenon. Based on total internal reflectance fluorescence microscopy and adsorption experiments, IsPETase is likely experiencing crowded conditions on PET films. Molecular dynamics simulations of IsPETase variants reveal a decrease in active site flexibility in free enzymes and reduced probability of productive active site formation in substrate-bound enzymes under crowding. Hence, we develop a surface crowding model to analyze the biochemical effects of three hit mutations (T116P, S238N, S290P) that enhanced ambient temperature activity and/or thermostability. We find that T116P decreases susceptibility to crowding, resulting in higher PET degradation product accumulation despite no change in intrinsic catalytic rate. In conclusion, we show that a macromolecular crowding-based biochemical model can be used to analyze the effects of mutations on properties of PETases and that crowding behavior is a major property to be targeted for enzyme engineering for improved PET degradation.

Relationships of crystallinity and reaction rates for enzymatic degradation of poly (ethylene terephthalate), PET.

Biocatalytic degradation of plastic waste is anticipated to play an important role in future recycling systems. However, enzymatic degradation of crystalline poly (ethylene terephthalate) (PET) remains consistently poor. Herein, we employed functional assays to elucidate the molecular underpinnings of this limitation. This included utilizing complementary activity assays to monitor the degradation of PET disks with varying crystallinity (XC), as well as determining enzymatic kinetic parameters for soluble PET fragments. The results indicate that an efficient PET-hydrolase, LCCICCG, operates through an endolytic mode of action, and that its activity is limited by conformational constraints in the PET polymer. Such constraints become more pronounced at high XC values, and this limits the density of productive sites on the PET surface. Endolytic chain-scissions are the dominant reaction type in the initial stage, and this means that little or no soluble organic product are released. However, endolytic cuts gradually and locally promote chain mobility and hence the density of attack sites on the surface. This leads to an upward concave progress curve; a behavior sometimes termed lag-phase kinetics.

Novel putative polyethylene terephthalate (PET) plastic degrading enzymes from the environmental metagenome.

Several plastic degrading enzymes have been described in the literature, most notably PETases that are capable of hydrolyzing polyethylene terephthalate (PET) plastic. One of them, the PETase from Ideonella sakaiensis, a bacterium isolated from environmental samples within a PET bottle recycling site, was a subject of extensive studies. To test how widespread PETase functionality is in other bacterial communities, we used a cascade of BLAST searches in the JGI metagenomic datasets and showed that close homologs of I. sakaiensis PETase can also be found in other metagenomic environmental samples from both human-affected and relatively pristine sites. To confirm their classification as putative PETases, we verified that the newly identified proteins have the PETase sequence signatures common to known PETases and that phylogenetic analyses group them with the experimentally characterized PETases. Additionally, docking analysis was performed in order to further confirm the functional assignment of the putative environmental PETases.

[Structure-based engineering of PET hydrolase from Ideonella sakaiensis].

Polyethylene terephthalate (PET) is a synthetic polymer consisting of ester bond-linked terephthalate and ethylene glycol. Tremendous amounts of PET have been produced and majority of them enters terrestrial and marine environment as wastes, posing serious threats to the global ecosystems. In 2016, a PET hydrolase from a PET-assimilating bacterium Ideonalla sakaiensis was reported and termed as IsPETase. This enzyme outperforms other PET-hydrolyzing enzymes in terms of its PET hydrolytic activity at ambient temperature, thus holds a great promise for PET biodegradation. In order to improve IsPETase activity, we conducted structure-based engineering to modify the putative substrate-binding tunnel. Among the several variants to the N233 residue of IsPETase, we discovered that the substitution of N233 with alanine increases its PET hydrolytic activity, which can be further enhanced when combined with a R280A mutation. We also determined the X-ray crystal structure of the IsPETase N233A variant, which shares nearly identical fold to the WT protein, except for an open end of subsite Ⅱ. We hypothesized that the smaller side chain of N233A variant might lead to an extended subsite Ⅱ for PET binding, which subsequently increases the enzymatic activity. Thus, this study provides new clues for further structure-based engineering of PETase.

Integrated Strategies for Enhancing the Expression of the AqCoA Chitosanase in Pichia pastoris by Combined Optimization of Molecular Chaperones Combinations and Copy Numbers via a Novel Plasmid pMC-GAP.

In our previous study, the chitosanase AqCoA and the chitooligosaccharides it produced were found to exhibit significant protective effects against fungal diseases. In this study, we enhanced the expression of AqCoA using the novel pMC-GAP that enables stable transformation of Escherichia coli, and built an integrated model based on the gene copy number, molecular chaperones, and protein production of AqCoA. In terms of gene dosage, the highest hydrolase activity was 0.32 U/ml in the strain with four copies, which was 1.78-fold higher than that of the strain with only one copy (0.18 U/ml). In addition, we found the chaperones such as PDI, ERO1, HAC1, YDJ1, SSE1, SSA4, and SSO2 improved protein expression. Furthermore, the PDI/ERO1, SSA4/SSE1, and YDJ1/SSO2 pairs synergistically increased the expression levels by 61%, 31%, and 42%, respectively. Finally, we investigated the combined effects of gene copy numbers and molecular chaperones on protein expression. The highest activity reached 2.32 U/ml in the strain with six integrated molecular chaperone expression cassettes and sixteen copies of the target gene, which was 13-fold higher than that of the control strain with only one copy (GAP-1AqCoA). Combined optimization of gene dosage and molecular chaperone combinations significantly increased the expression level of AqCoA, providing a powerful strategy to improve the expression of other heterologous proteins in P. pastoris.

A distal regulatory strategy of enzymes: from local to global conformational dynamics.

Modulating the distribution of various states in protein ensembles through distal sites may be promising in the evolution of enzymes in desired directions. However, the prediction of distal mutation hotspots that stabilize the favoured states from a computational perspective remains challenging. Here, we presented a strategy based on molecular dynamics (MD) and Markov state models (MSM) to predict distal mutation sites. Extensive MD combined with MSM was applied to determine the principally distributed metastable states interconverting at a slow timescale. Then, molecular docking was used to classify these states into active states and inactive ones. Distal mutation hotspots were targeted based on comparing the conformational features between active and inactive states, where mutations destabilize the inactive states and show little influence on the active state. The proposed strategy was used to explore the highly dynamic MHETase, which shows a potential application in the biodegradation of poly(ethylene terephthalate) (PET). Seven principally populated interrelated metastable states were identified, and the atomistic picture of their conformational changes was unveiled. Several residues at distal positions were found to adopt more H-bond occupancies in inactive states than active states, making them potential mutation hotspots for stabilizing the favoured conformations. In addition, the detailed mechanism revealed the significance of calcium ions at a distance from the catalytic centre in reshaping the free energy landscape. This study deepens the understanding of the conformational dynamics of α/ß hydrolases containing a lid domain and advances the study of enzymatic plastic degradation.

Excretory expression of IsPETase in E. coli by an enhancer of signal peptides and enhanced PET hydrolysis.

The PET hydrolase from Ideonella sakaiensis (IsPETase) is efficient for PET degradation, which provides a promising solution for environmental contamination by plastics. This study focuses on improving the excretion of IsPETase from E. coli by signal peptide (SP) engineering. A SP enhancer B1 (MERACVAV) was fused to the N-terminal of commonly-used SP (PelB, MalE, LamB, and OmpA) to mediate excretion of IsPETase. Strikingly, the modified SP B1OmpA, B1PelB, and B1MalE significantly increased the excretion of IsPETase, while IsPETase was basically expressed in periplasmic space without enhancer B1. The excretion efficiency of IsPETase mediated by B1PelB was improved by 62 folds compared to that of PelB. The hydrolysis of PET by crude IsPETase in culture solution was also enhanced. Furthermore, the amount of released MHET/TPA from PET by IsPETase was increased by 2.7 folds with pre-incubation of hydrophobin HFBII. Taken together, this work may provide a feasible strategy for the excretion and application of the IsPETase.

Crystal structure of the ferredoxin reductase component of carbazole 1,9a-dioxygenase from Janthinobacterium sp. J3.

Carbazole 1,9a-dioxygenase (CARDO), which consists of an oxygenase component and the electron-transport components ferredoxin (CARDO-F) and ferredoxin reductase (CARDO-R), is a Rieske nonheme iron oxygenase (RO). ROs are classified into five subclasses (IA, IB, IIA, IIB and III) based on their number of constituents and the nature of their redox centres. In this study, two types of crystal structure (type I and type II) were resolved of the class III CARDO-R from Janthinobacterium sp. J3 (CARDO-RJ3). Superimposition of the type I and type II structures revealed the absence of flavin adenine dinucleotide (FAD) in the type II structure along with significant conformational changes to the FAD-binding domain and the C-terminus, including movements to fill the space in which FAD had been located. Docking simulation of NADH into the FAD-bound form of CARDO-RJ3 suggested that shifts of the residues at the C-terminus caused the nicotinamide moiety to approach the N5 atom of FAD, which might facilitate electron transfer between the redox centres. Differences in domain arrangement were found compared with RO reductases from the ferredoxin-NADP reductase family, suggesting that these differences correspond to differences in the structures of their redox partners ferredoxin and terminal oxygenase. The results of docking simulations with the redox partner class III CARDO-F from Pseudomonas resinovorans CA10 suggested that complex formation suitable for efficient electron transfer is stabilized by electrostatic attraction and complementary shapes of the interacting regions.

Structural and digestion properties of potato starch modified using an efficient starch branching enzyme AqGBE.

Modified potato starch with slower digestion may aid the development of new starch derivatives with improved nutritional values, and strategies to increase nutritional fractions such as resistant starch (RS) are desired. In this study, a correspondence between starch structure and enzymatic resistance was provided based on the efficient branching enzyme AqGBE, and modified starches with different amylose content (Control, 100%; PS1, 90%; PS2, 72%; PS3, 32%; PS4, 18%) were prepared. Through SEM observation, NMR and X-ray diffraction analyses, we identified that an increased proportion of α-1,6-linked branches in potato starch changes its state of granule into large pieces with crystallinity. Molecular weight and chain-length distribution analysis showed a decrease of molecular weight (from 1.1 × 106 to 1.1 × 105 g/mol) without an obvious change of chain-length distribution in PS1, while PS2-4 exhibited an increased proportion of DP 6-12 with a stable molecular weight distribution, indicating a distinct model of structural modification by AqGBE. The enhancement of peak viscosity was related to increased hydrophobic interactions and pieces state of PS1, while the contents of SDS and RS in PS1 increased by 37.7 and 49.4%, respectively. Our result provides an alternative way to increase the RS content of potato starch by branching modification.

Genome analysis of Pseudomonas sp. OF001 and Rubrivivax sp. A210 suggests multicopper oxidases catalyze manganese oxidation required for cylindrospermopsin transformation.

BACKGROUND: Cylindrospermopsin is a highly persistent cyanobacterial secondary metabolite toxic to humans and other living organisms. Strain OF001 and A210 are manganese-oxidizing bacteria (MOB) able to transform cylindrospermopsin during the oxidation of Mn2+. So far, the enzymes involved in manganese oxidation in strain OF001 and A210 are unknown. Therefore, we analyze the genomes of two cylindrospermopsin-transforming MOB, Pseudomonas sp. OF001 and Rubrivivax sp. A210, to identify enzymes that could catalyze the oxidation of Mn2+. We also investigated specific metabolic features related to pollutant degradation and explored the metabolic potential of these two MOB with respect to the role they may play in biotechnological applications and/or in the environment. RESULTS: Strain OF001 encodes two multicopper oxidases and one haem peroxidase potentially involved in Mn2+ oxidation, with a high similarity to manganese-oxidizing enzymes described for Pseudomonas putida GB-1 (80, 83 and 42% respectively). Strain A210 encodes one multicopper oxidase potentially involved in Mn2+ oxidation, with a high similarity (59%) to the manganese-oxidizing multicopper oxidase in Leptothrix discophora SS-1. Strain OF001 and A210 have genes that might confer them the ability to remove aromatic compounds via the catechol meta- and ortho-cleavage pathway, respectively. Based on the genomic content, both strains may grow over a wide range of O2 concentrations, including microaerophilic conditions, fix nitrogen, and reduce nitrate and sulfate in an assimilatory fashion. Moreover, the strain A210 encodes genes which may convey the ability to reduce nitrate in a dissimilatory manner, and fix carbon via the Calvin cycle. Both MOB encode CRISPR-Cas systems, several predicted genomic islands, and phage proteins, which likely contribute to their genome plasticity. CONCLUSIONS: The genomes of Pseudomonas sp. OF001 and Rubrivivax sp. A210 encode sequences with high similarity to already described MCOs which may catalyze manganese oxidation required for cylindrospermopsin transformation. Furthermore, the analysis of the general metabolism of two MOB strains may contribute to a better understanding of the niches of cylindrospermopsin-removing MOB in natural habitats and their implementation in biotechnological applications to treat water.

Emerging Roles of PETase and MHETase in the Biodegradation of Plastic Wastes.

Polyethylene terephthalate (PET) is extensively used in plastic products, and its accumulation in the environment has become a global concern. Being a non-degradable pollutant, a tremendous quantity of PET-bearing plastic materials have already accumulated in the environment, posing severe challenges towards the existence of various endangered species and consequently threatening the ecosystem and biodiversity. While conventional recycling and remediation methodologies so far have been ineffective in formulating a "green" degradation protocol, the bioremediation strategies-though nascent-are exhibiting greater promises towards achieving the target. Very recently, a novel bacterial strain called Ideonella sakaiensis 201-F6 has been discovered that produces a couple of unique enzymes, polyethylene terephthalate hydrolase and mono(2-hydroxyethyl) terephthalic acid hydrolase, enabling the bacteria to utilize PET as their sole carbon source. With a detailed understanding of the protein structure of these enzymes, possibilities for their optimization as PET degrading agents have started to emerge. In both proteins, several amino acids have been identified that are not only instrumental for catalysis but also provide avenues for the applications of genetic engineering strategies to improve the catalytic efficiencies of the enzymes. In this review, we focused on such unique structural features of these two enzymes and discussed their potential as molecular tools that can essentially become instrumental towards the development of sustainable bioremediation strategies. Degradation PET by wild type and genetically engineered PETase and MHETase. Effect of the MHETase-PETase chimeric protein and PETase expressed on the surface of yeast cells on PET degradation is also shown.

Degradation of Multiple Peptides by Microcystin-Degrader Paucibacter toxinivorans (2C20).

Since conventional drinking water treatments applied in different countries are inefficient at eliminating potentially toxic cyanobacterial peptides, a number of bacteria have been studied as an alternative to biological filters for the removal of microcystins (MCs). Here, we evaluated the degradation of not only MCs variants (-LR/DM-LR/-RR/-LF/-YR), but also non-MCs peptides (anabaenopeptins A/B, aerucyclamides A/D) by Paucibactertoxinivorans over 7 days. We also evaluated the degradation rate of MC-LR in a peptide mix, with all peptides tested, and in the presence of M. aeruginosa crude extract. Furthermore, biodegradation was assessed for non-cyanobacterial peptides with different chemical structures, such as cyclosporin A, (Glu1)-fibrinopeptide-B, leucine-enkephalin, and oxytocin. When cyanopeptides were individually added, P. toxinivorans degraded them (99%) over 7 days, except for MC-LR and -RR, which decreased by about 85 and 90%, respectively. The degradation rate of MC-LR decreased in the peptide mix compared to an individual compound, however, in the presence of the Microcystis extract, it was degraded considerably faster (3 days). It was noted that biodegradation rates decreased in the mix for all MCs while non-MCs peptides were immediately degraded. UPLC-QTOF-MS/MS allowed us to identify two linear biodegradation products for MC-LR and MC-YR, and one for MC-LF. Furthermore, P. toxinivorans demonstrated complete degradation of non-cyanobacterial peptides, with the exception of oxytocin, where around 50% remained after 7 days. Thus, although P. toxinivorans was previously identified as a MC-degrader, it also degrades a wide range of peptides under a range of conditions, which could be optimized as a potential biological tool for water treatment.

How the O2-dependent Mg-protoporphyrin monomethyl ester cyclase forms the fifth ring of chlorophylls.

Mg-protoporphyrin IX monomethyl ester (MgPME) cyclase catalyses the formation of the isocyclic ring, producing protochlorophyllide a and contributing substantially to the absorption properties of chlorophylls and bacteriochlorophylls. The O2-dependent cyclase is found in both oxygenic phototrophs and some purple bacteria. We overproduced the simplest form of the cyclase, AcsF, from Rubrivivax gelatinosus, in Escherichia coli. In biochemical assays the di-iron cluster within AcsF is reduced by ferredoxin furnished by NADPH and ferredoxin:NADP+ reductase, or by direct coupling to Photosystem I photochemistry, linking cyclase to the photosynthetic electron transport chain. Kinetic analyses yielded a turnover number of 0.9 min-1, a Michaelis-Menten constant of 7.0 µM for MgPME and a dissociation constant for MgPME of 0.16 µM. Mass spectrometry identified 131-hydroxy-MgPME and 131-keto-MgPME as cyclase reaction intermediates, revealing the steps that form the isocyclic ring and completing the work originated by Sam Granick in 1950.

Protein engineering of stable IsPETase for PET plastic degradation by Premuse.

Poly(ethylene terephthalate) (PET) is used widely by human beings, but is very difficult to degrade. Up to now, the PET degradation effect of PETase from Ideonella sakaiensis 201-F6 (IsPETase) variants with low stability and activity was not ideal. In this study, a mutation design tool, Premuse, was developed to integrate the sequence alignment and quantitative selection of the preferred mutations based on natural sequence evolution. Ten single point mutants were selected from 1486 homologous sequences using Premuse, and then two mutations (W159H and F229Y) with improved stability were screened from them. The derived double point mutant, W159H/F229Y, exhibited a strikingly enhanced enzymatic performance. Its Tm and catalytic efficiency values (kcat/Km) respectively increased by 10.4 °C and 2.0-fold using p-NPP as the substrate compared with wild type. The degradation activity for amorphous PET was increased by almost 40-fold in comparison with wild type at 40 °C in 24 h. Additionally, the variant could catalyze biodegradation of PET bottle preform at a mean rate of 23.4 mgPET/h/mgenzyme. This study allowed us to design the mutation more efficiently, and provides a tool for achieving biodegradation of PET pollution under mild natural environments.

Structural Insights into Carboxylic Polyester-Degrading Enzymes and Their Functional Depolymerizing Neighbors.

Esters are organic compounds widely represented in cellular structures and metabolism, originated by the condensation of organic acids and alcohols. Esterification reactions are also used by chemical industries for the production of synthetic plastic polymers. Polyester plastics are an increasing source of environmental pollution due to their intrinsic stability and limited recycling efforts. Bioremediation of polyesters based on the use of specific microbial enzymes is an interesting alternative to the current methods for the valorization of used plastics. Microbial esterases are promising catalysts for the biodegradation of polyesters that can be engineered to improve their biochemical properties. In this work, we analyzed the structure-activity relationships in microbial esterases, with special focus on the recently described plastic-degrading enzymes isolated from marine microorganisms and their structural homologs. Our analysis, based on structure-alignment, molecular docking, coevolution of amino acids and surface electrostatics determined the specific characteristics of some polyester hydrolases that could be related with their efficiency in the degradation of aromatic polyesters, such as phthalates.

Class I hydrophobins pretreatment stimulates PETase for monomers recycling of waste PETs.

Poly(ethylene terephthalate) hydrolase (PETase) from Ideonella sakaiensis 201-F6 was expressed and purified from Escherichia coli to hydrolyze poly(ethylene terephthalate) (PET) fibers waste for its monomers recycling. Hydrolysis carried out at pH 8 and 30 °C was found to be the optimal condition based on measured monomer mono(2-hydroxyethyl) terephthalate (MHET) and terephthalic acid (TPA) concentrations after 24 h reaction. The intermediate product bis(2-hydroxyethyl) terephthalate (BHET) was a good substrate for PETase because BHET released from PET hydrolysis was efficiently converted into MHET. Only a trace amount of MHET could be further hydrolyzed to TPA. Class I hydrophobins RolA from Aspergillus oryzae and HGFI from Grifola frondosa were expressed and purified from E. coli to pretreat PET surface for accelerating PETase hydrolysis against PET. The weight loss of hydrolyzed PET increased from approximately 18% to 34% after hydrophobins pretreatment. The releases of TPA and MHET from HGFI-pretreated PET were enhanced 48% and 62%, respectively. The selectivity (TPA/MHET ratio) of the hydrolysis reaction was approximately 0.5.