Rapid and Scalable Halosulfonylation of Strain-Release Reagents.

Sulfonylated aromatics are commonplace motifs in drugs and agrochemicals. However, methods for the direct synthesis of sulfonylated non-classical arene bioisosteres, which could improve the physicochemical properties of drug and agrochemical candidates, are limited. Here we report a solution to this challenge: a one-pot halosulfonylation of [1.1.1]propellane, [3.1.1]propellane and bicyclo[1.1.0]butanes that proceeds under practical, scalable and mild conditions. The sulfonyl halides used in this chemistry feature aryl, heteroaryl and alkyl substituents, and are conveniently generated in situ from readily available sulfinate salts and halogen atom sources. This methodology enables the synthesis of an array of pharmaceutically and agrochemically relevant halogen/sulfonyl-substituted bioisosteres and cyclobutanes, on up to multidecagram scale.

Tuning the Mechanism of H/D Exchange for Isobutane on H-BEA by Loading Zn Species in Zeolite.

Kinetics of H/D hydrogen exchange between deuterated isobutane-d10 and Brønsted acid sites (BAS) of three zeolite samples (H-BEA, ZnO/H-BEA, Zn2+ /H-BEA) were monitored with 1 H MAS NMR in situ at 343-468 K. The regioselective H/D exchange in the methyl groups detected on H-BEA can be rationalized in terms of the mechanism of indirect exchange, which involves protonation of the intermediate olefin and further hydride abstraction from the other alkane molecule by the formed carbenium ion. Loading of Zn species in the zeolite results in a decrease of the rate and an increase of the activation energy of the exchange. The loaded Zn species provide the tuning effect on the reaction occurrence, changing the mechanism from the indirect one to the mechanism of the direct exchange.

Beyond Bioisosteres: Divergent Synthesis of Azabicyclohexanes and Cyclobutenyl Amines from Bicyclobutanes.

The development of two divergent and complementary Lewis acid catalyzed additions of bicyclobutanes to imines is described. Microscale high-throughput experimentation was integral to the discovery and optimization of both reactions. N-arylimines undergo formal (3+2) cycloaddition with bicyclobutanes to yield azabicyclo[2.1.1]hexanes in a single step; in contrast, N-alkylimines undergo an addition/elimination sequence to generate cyclobutenyl methanamine products with high diastereoselectivity. These new products contain a variety of synthetic handles for further elaboration, including many functional groups relevant to pharmaceutical synthesis. The divergent reactivity observed is attributed to differences in basicity and nucleophilicity of the nitrogen atom in a common carbocation intermediate, leading to either nucleophilic attack (N-aryl) or E1 elimination (N-alkyl).

The effect of crosslinking on ion transport in nanocellulose-based membranes.

Ion selective membranes are at the heart of energy conversion and harvesting, water treatment, and biotechnologies. The currently available membranes are mostly based on expensive and non-biodegradable polymers. Here, we report a cation-selective and low-cost membrane prepared from renewable nanocellulose and 1,2,3,4-butanetetracarboxylic acid which simultaneously serves as crosslinker and source of anionic surface groups. Charge density and structure of the membranes are studied. By using different degrees of crosslinking, simultaneous control over both the nanochannel structure and surface charge concentration is achieved, which in turn determines the resulting ion transport properties. Increasing negative charge concentration via higher crosslinker content, the obtained ion conductivity reaches up to 8 mS/cm (0.1 M KCl). Optimal ion selectivity, also influenced by the solution pH, is achieved at 20 wt% crosslinker addition (with ion conductivity of 1.6 mS/cm). As regular ~1.4 nm nanochannels were formed at this composition, nanofluidic contribution to ion transport is likely.

Contributions of higher-order proximal distribution functions to solvent structure around proteins.

The proximal distribution function (pDF) quantifies the probability of finding a solvent molecule in the vicinity of solutes. The approach constitutes a hierarchically organized theory for constructing approximate solvation structures around solutes. Given the assumption of universality of atom cluster-specific solvation, reconstruction of the solvent distribution around arbitrary molecules provides a computationally convenient route to solvation thermodynamics. Previously, such solvent reconstructions usually considered the contribution of the nearest-neighbor distribution only. We extend the pDF reconstruction algorithm to terms including next-nearest-neighbor contribution. As a test, small molecules (alanine and butane) are examined. The analysis is then extended to include the protein myoglobin in the P6 crystal unit cell. Molecular dynamics simulations are performed, and solvent density distributions around the solute molecules are compared with the results from different pDF reconstruction models. It is shown that the next-nearest-neighbor modification significantly improves the reconstruction of the solvent number density distribution in concave regions and between solute molecules. The probability densities are then used to calculate the solute-solvent non-bonded interaction energies including van der Waals and electrostatic, which are found to be in good agreement with the simulated values.

Catalytic mechanism of butane anaerobic oxidation for alkyl-coenzyme M reductase.

Methane is among the most potent of the greenhouse gases, which plays a key role in global climate change. As an excellent carbon and energy source, methane can be utilized by anaerobic methane oxidizing archaea and aerobic methane oxidizing bacteria. The previous work shows that an anaerobic thermophilic enrichment culture composed of dense consortia of archaea and bacteria apparently uses partly similar pathways to oxidize the C4 hydrocarbon butane. However, the catalytic mechanism of butane anaerobic oxidation for alkyl-coenzyme M reductase is still unknown. Therefore, molecular dynamics (MD) simulation was used to investigate the dynamics differences of catalytic mechanism between methane coenzyme M reductase (MCR) and alkyl-coenzyme M reductase (ACR). At first, the binding pocket of ACR is larger than that of MCR. Then, the complex of butane and ACR is more stable than that of methane and ACR. Protein conformation cloud suggests that the position of methane is dynamics and methane escapes from the binding pocket of ACR during most of the simulation time, while butane tightly binds in the pocket of ACR. The hydrophobic interactions between butane and ACR are more and stronger than those between methane and ACR. At the same time, the binding free energy between butane and ACR is significantly lower than that between methane and ACR. The dynamics correlation network indicates that the transformation of information flow for ACR-butane is smoother than that for ACR-methane. The shortest pathway for ACR-butane is from Gln144, Ala141, Hie135, Ile133, Ala160, Arg206, Asp97, Met94, Tyr347 to Phe345 with synergistic effect for two butane molecules. This study can insight into the catalytic mechanism for butane/ACR complex.

Association of antioxidant monophenolic compounds with ß-cyclodextrin-functionalized cellulose and starch substrates.

Polysaccharide substrates loaded with antioxidant and antimicrobial compounds, effectively protected by cyclodextrin moieties, can be a long-lasting solution to confer certain properties to fabrics, paper and other materials. ß-Cyclodextrin was attached to α-cellulose, bleached pulp and starch by a two-step esterification with a tetracarboxylic acid. The resulting derivatives were characterized by spectroscopy, thermal degradation analysis and capability of phenolphthalein inclusion. The carriers, containing between 89 and 171 µmol of ß-cyclodextrin per gram, were loaded with carvacrol, cuminaldehyde, cinnamaldehyde and hydroxytyrosol. From a stoichiometric addition, the percentage of compound retained ranged from 49% (hydroxytyrosol in pulp-cyclodextrin) to 92% (carvacrol in starch-cyclodextrin). Finally, the release rate to aqueous ethanol was measured over eight days and fitted to kinetic models. From the analysis of the mean dissolution time, it can be concluded that inserting ß-cyclodextrin units enhanced the long-term holding of phenolic active compounds in carbohydrate matrices.

Sapphire-Based Clustering.

Molecular dynamics simulations are a popular means to study biomolecules, but it is often difficult to gain insights from the trajectories due to their large size, in both time and number of features. The Sapphire (States And Pathways Projected with HIgh REsolution) plot allows a direct visual inference of the dominant states visited by high-dimensional systems and how they are interconnected in time. Here, we extend this visual inference into a clustering algorithm. Specifically, the automatic procedure derives from the Sapphire plot states that are kinetically homogeneous, structurally annotated, and of tunable granularity. We provide a relative assessment of the kinetic fidelity of the Sapphire-based partitioning in comparison to popular clustering methods. This assessment is carried out on trajectories of n-butane, a ß-sheet peptide, and the small protein BPTI. We conclude with an application of our approach to a recent 100 µs trajectory of the main protease of SARS-CoV-2.

Adsorption of Pb(II) ions from contaminated water by 1,2,3,4-butanetetracarboxylic acid-modified microcrystalline cellulose: Isotherms, kinetics, and thermodynamic studies.

Microcrystalline cellulose (MCC) has been utilized as an adsorbent material for the removal of Pb(II) ions from aqueous solution after treatment with 1,2,3,4-butanetetracarboxylic acid (BTCA) at elevated temperature to obtain MMCC. The resulting adsorbent was characterized for point of zero point charge (pHZPC), estimation of carboxyl content, Fourier transform infrared spectroscopy (FT-IR), scan electron microscopy (SEM), and textural properties, including surface area, and subsequently utilized for the removal of Pb(II) ions from aqueous solution. The adsorption process was probed by investigating the effect of adsorbent dose, pH of solution, temperature, agitation time, and Pb(II) ion concentration. The results showed successful functionalization of MCC using BTCA, significantly improved the binding properties of the adsorbent towards Pb(II) ions. Isothermal adsorption data was analyzed using Langmuir, Freundlich and Temkin models, evaluated via nonlinear regression analysis. The maximum adsorption capacity was found to be 1155 mg/g (at pH 5 and 30 °C) from Langmuir theory, and appears independent of surface area. The Freundlich model was found to provide the best fit and the constant n was determined to be 2.69, indicating that adsorption of Pb(II) ions onto MMCC is favorable. Kinetic modelling showed good agreement for the pseudo-second order kinetic model, supporting the theory that chemisorption is involved in the adsorption process, which is promoted by a high density of active sites. Thermodynamic analysis showed that the adsorption of Pb(II) ions onto MMCC was endothermic and nonspontaneous; hence, MMCC offers an effective method of Pb(II) ion removal from aqueous solutions, with potential for water remediation processes.

Diastereoisomerically Pure, (S)-O-1,2-O-isopropyli dene-(5-O-α-d-glucofuranosyl) t-butanesulfinate: Synthesis, Crystal Structure, Absolute Configuration and Reactivity.

The reaction of t-butylmagnesium chlorides with diastereomerically pure (R)-1,2-O-isopropylidene-3,5-O-sulfinyl-α-d-glucofuranose (R)-4 was found to be stopped at the stage of the corresponding, diastereoisomerically pure 1,2-O-isopropylidene-(5-O-α-d-glucofuranosyl) t-butanesulfinate (S)-10 for which the crystal structure and the (S)-absolute configuration was determined by X-ray crystallography. Comparison of the absolute configurations of the starting sulfite (R)-4, and t-butanesulfinate (S)-10 (which crystallizes in the orthorhombic system, space group P212121, with the single compound molecule present in the asymmetric unit), clearly indicates that the reaction of nucleophilic substitution at the stereogenic sulfur atom in the sulfite (R)-4 occurs with the full inversion of configuration via the trigonal bipyramidal sulfurane intermediate 4c in which both the entering and leaving groups are located in apical positions.

Conversion of the Propane-Butane Fraction into Arenes on MFI Zeolites Modified by Zinc Oxide and Activated by Low-Temperature Plasma.

The effect of modification of MFI zeolite 1-5 wt.% ZnO activated by plasma on acid and catalytic properties in the conversion of the propane-butane fraction into arenes was investigated. The high-silica zeolites with silicate module 45 were synthesized from alkaline alumina-silica gels in the presence of an 'X-oil' organic structure-forming additive. The modification of the zeolite with zinc was carried out by impregnating the zeolite granules in the H-form with an aqueous solution of Zn(NO3)2. The obtained zeolites were characterized by X-ray phase analysis and IR spectroscopy. It is shown that the synthesized zeolites belong to the high-silica MFI zeolites. The study of microporous zeolite-containing catalysts during the conversion of C3-C4 alkanes to aromatic hydrocarbons made it possible to establish that the highest yield of aromatic hydrocarbons is observed on zeolite catalysts modified with 1 and 3% ZnO and amount to 63.7 and 64.4% at 600 °C, respectively, which is 7.7-8.4% more than on the original zeolite. The preliminary activation of microporous zeolites modified with 1-5% ZnO and plasma leads to an increase in the yield of aromatic hydrocarbons from the propane-butane fraction; the maximum yield of arenes is observed in zeolite catalysts modified with 1 and 3% ZnO and activated by plasma, amounting to 64.9 and 65.5% at 600 °C, respectively, which is 8.9-9.5% more than on the initial zeolite. The activity of the zeolite catalysts modified by ZnO and activated by plasma show good agreement with their acid properties. Activation of the zeolites modified by 1 and 3% ZnO and plasma leads to an increase in the concentration of the weak acid sites of the catalyst to 707 and 764 mmol/g in comparison with plasma-inactivated 1 and 3% ZnO/ZKE-XM catalysts at 626 and 572 mmol/g, respectively.

A novel and efficient subcritical butane extraction method and UHPLC analysis of oxyprenylated phenylpropanoids from grapefruits peels.

Biologically active prenyoxyphenylpropanoids are well known to be biosynthesized by Citrus species, for which they have been found most abundantly in fruit peels. Although several extraction methodologies have been described, the development of novel and alternative extraction processes is a field of research of current interest. In this preliminary communication, we studied the performance of the subcritical butane promoted extraction of selected oxyprenylated phenylpropanoids from grapefruit peels under a counter-current mode using a handmade extraction apparatus coupled to UHPLC analysis. The application of such a method yielded 7-isopentenyloxycoumarin, auraptene, and boropinic acid in quantities higher than those recorded for other extraction methodologies like the ultrasound- and microwave-assisted macerations (0.234, 1.035, and 0.211 mg/g of dry extract respectively). The use of subcritical butane as the extraction solvent for oxyprenylated phenylpropanoids is reported herein for the first time and can be easily adopted for several other food matrices.

Structurally Diverse Acyl Bicyclobutanes: Valuable Strained Electrophiles.

Bicyclo[1.1.0]butanes (BCBs) are highly strained carbocycles that have emerged as versatile synthetic tools, particularly for the construction of functionalized small molecules. This work reports two efficient pathways for the rapid preparation of over 20 structurally diverse BCB ketones, encompassing simple alkyl and aryl derivatives, as well as unprecedented amino acid, dipeptide, bioisostere, and bifunctional linchpin reagents currently inaccessible using literature methods. Analogues are readily forged in two steps and in high yields from simple carboxylic acids or through unsymmetrical ketone synthesis beginning with a convenient carbonyl dication equivalent. The utility of this novel toolbox of strained electrophiles for the selective modification of proteinogenic nucleophiles is highlighted.

Structural optimization of natural product nordihydroguaretic acid to discover novel analogues as AcrB inhibitors.

Drug efflux pumps confer multidrug resistance to dangerous bacterial pathogens which makes these proteins promising drug targets. Herein, we present initial chemical optimization and structure-activity relationship (SAR) data around a previously described efflux pump inhibitor, nordihydroguaretic acid (NDGA). Four series of novel NDGA analogues that target Escherichia coli AcrB were designed, synthesized and evaluated for their ability to potentiate the activity of antibiotics, to inhibit AcrB-mediated substrate efflux and reduce off-target activity. Nine novel structures were identified that increased the efficacy of a panel of antibiotics, inhibited drug efflux and reduced permeabilization of the bacterial outer and inner membranes. Among them, WA7, WB11 and WD6 possessing broad-spectrum antimicrobial sensitization activity were identified as NDGA analogues with favorable properties as potential AcrB inhibitors, demonstrating moderate improvement in potency as compared to NDGA. In particular, WD6 was the most broadly active analogue improving the activity of all four classes of antibacterials tested.

Immobilized lysozyme onto 1,2,3,4-butanetetracarboxylic (BTCA)-modified magnetic cellulose microsphere for improving bio-catalytic stability and activities.

Novel carboxyl-functionalized core-shell magnetic cellulose microspheres (MCMS) were prepared by surface modification with 1,2,3,4-butanetetracarboxylic acid (BTCA) and then applied in the immobilization of lysozyme via covalent bonding. The successful preparation of particles has been verified by transmission electron microscopy (TEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Fourier-transform infrared spectroscopy (FTIR) techniques. The optimal temperature and pH of the immobilized lysozyme were shown to be respectively 40 °C and 7. The immobilized lysozyme exhibited excellent performances within wide pH and temperature ranges as well as the high storage and thermal stabilities compared to free lysozyme. The apparent kinetic characterization of immobilized lysozyme revealed that its Km value was 1.37 times higher than that of free lysozyme and that its Vmax was slightly lower. The immobilized lysozyme demonstrated an acceptable reusability and showed 51.9±2.2% of activity after six cycles. This study demonstrated the application potential of BTCA-modified MCMS as an immobilized carrier for lysozyme.

J-2156, a somatostatin receptor type 4 agonist, alleviates mechanical hyperalgesia in a rat model of chronic low back pain.

Chronic low back pain (LBP) ranks among the most common reasons for patient visits to healthcare providers. Drug treatments often provide only partial pain relief and are associated with considerable side-effects. J-2156 [(1'S,2S)-4amino-N-(1'-carbamoyl-2'-phenylethyl)-2-(4"-methyl-1"-naphthalenesulfonylamino)butanamide] is an agonist that binds with nanomolar affinity to the rat and human somatostatin receptor type 4 (SST4 receptor). Hence, our aim was to assess the efficacy of J-2156 for relief of chronic mechanical LBP in a rat model. Male Sprague Dawley rats were anaesthetised and their lumbar L4/L5 and L5/L6 intervertebral discs (IVDs) were punctured (0.5 mm outer diameter, 2 mm-deep) 10 times per disc. Sham-rats underwent similar surgery, but without disc puncture. For LBP-rats, noxious pressure hyperalgesia developed in the lumbar axial deep tissues from day 7 to day 21 post-surgery, which was maintained until study completion. Importantly, mechanical hyperalgesia did not develop in the lumbar axial deep tissues of sham-rats. In LBP-rats, single intraperitoneal (i.p.) injection of J-2156 (3, 10, 30 mg kg-1) alleviated primary and secondary hyperalgesia in the lumbar axial deep tissues at L4/L5 and L1, respectively. This was accompanied by a reduction in the otherwise augmented lumbar (L4-L6) dorsal root ganglia expression levels of the pro-nociceptive mediators: phosphorylated p38 (pp38) mitogen-activated protein kinase (MAPK) and phosphorylated p44/p42 MAPK and a reduction in pp38 MAPK in the lumbar enlargement of the spinal cord. The SST4 receptor is worthy of further investigation as a target for discovery of novel analgesics for the relief of chronic LBP.

DFT investigation on thermochemical analyses of conversion of xylose to linear alkanes in aqueous phase.

Xylose is an integral part of hemicellulose fraction of lignocellulosic biomass. Its abundance in the lignocellulose makes it a desirable component for converting into various value-added compounds. In this study, conversion of xylose to four linear alkanes has been discussed by five different schemes including their thermochemistry under the framework of density functional theory. Main products are butane, pentane, octane and tridecane whereas the intermediate products include furfural, tetrahydrofuran, pentane-1,5-diol, etc. The simulations have been performed at B3LYP/6-31 + g(d,p) and M06-2X/6-31 + g(d,p) level of theories in aqueous phase using SMD solvation model. Thermochemical parameters (ΔG, ΔH and Keq) are obtained at a wide range of temperature, i.e. 298-698 K. Single point energy change (ΔE) of all the conversion steps has also been calculated at M05-2X/6-311++g(3df,2p) level of theory in the aqueous phase. It is observed that temperature plays a vital role in the formation of products. At high temperature, only scheme RS 1 (i.e. xylose to butane) can proceed to produce butane. The absolute difference between two functionals, B3LYP and M06-2X, was found to be small (<2 kcal/mol) for ring opening reactions making both the functionals suitable for a qualitative study. For saturation of cyclic compounds, a large difference (>10 kcal/mol) was observed between the two functionals making higher accuracy method more suitable for them. For all other reactions, use of M06-2X can be preferred.

Asymmetric Synthesis of Natural and Unnatural Dibenzylbutane Lignans from a Common Intermediate.

Lignans are a structurally diverse class of natural products with extensive pharmacological effects. Here we report the syntheses of both natural and unnatural dibenzylbutane lignans from a common intermediate, which is prepared in five steps from known materials. Derivatization of this intermediate affords lignans featuring contiguous stereocenters in a high diastereomeric purity after chromatography. This divergent synthetic route can be exploited to prepare dibenzylbutane lignans and analogues thereof to probe their biological profiles.