Critical new insights into the interactions of hexafluoropropylene oxide-dimer acid (GenX or HFPO-DA) with albumin at molecular and cellular levels.

A key characteristic to be elucidated, to address the harmful health risks of environmental perfluorinated alkyl substances (PFAS), is their binding modes to serum albumin, the most abundant protein in blood. Hexafluoropropylene oxide-dimer acid (GenX or HFPO-DA) is a new industrial replacement for the widespread linear long-chain PFAS. However, the detailed interaction of new-generation short-chain PFAS with albumin is still lacking. Herein, the binding characteristics of bovine serum albumin (BSA) to GenX were explored at the molecular and cellular levels. It was found that this branched short-chain GenX could bind to BSA with affinity lower than that of legacy linear long-chain perfluorooctanoic acid (PFOA). Site marker competitive study and molecular docking simulation revealed that GenX interacted with subdomain IIIA to form BSA-GenX complex. Consistent with its weaker affinity to albumin protein, the cytotoxicity of branched short-chain GenX was less susceptible to BSA binding compared with that of the linear long-chain PFOA. In contrast to the significant effects of strong BSA-PFOA interaction, the weak affinity of BSA-GenX binding did not influence the structure of protein and the cytotoxicity of GenX. The detailed characterization and direct comparisons of serum albumin interaction with new generation short-chain GenX will provide a better understanding for the toxicological properties of this new alternative.

Effective removal of perfluorooctanoic acid from water using PVA@UiO-66-NH2/GO composite materials via adsorption.

This study introduces an innovative approach using highly efficient nanocomposite materials to effectively remove PFAS from water, demonstrating remarkable adsorption capabilities. The nanocomposite was synthesized by integrating a zirconium-based metal-organic framework (MOF) called UiO-66 with graphene oxide (GO) within a polyvinyl alcohol (PVA) matrix. The resulting PVA@UiO-66/GO material features flower-like UiO-66 MOF crystals embedded in the PVA and GO matrix. Various kinetic models were applied to determine the rate constants and adsorption capacities, with the Langmuir isotherm indicating an adsorption capacity of 9.904 mg/g. Thermodynamic analysis confirmed the process's spontaneity and exothermic nature. The UiO-66-NH2/GO/PVA composite also demonstrated high reusability, maintaining substantial PFOA removal efficiency across multiple cycles, with optimal reduction occurring at approximately pH 5. Overall, the PVA@UiO-66/GO composites offer an effective, sustainable, and environmentally friendly solution for PFAS removal in water purification.

Hansen solubility parameters and quality-by-design oriented optimized cationic nanoemulsion for transdermal drug delivery of tolterodine tartrate.

Tolterodine tartrate (TOT) is a selective anti-muscarinic drug to treat urinary urgency and overactive urinary bladder (OAB) occurring in children, renal disease and elderly patients. Oral delivery is associated with several adverse effects. We addressed HSPiP and QbD (quality by design)-oriented TOT loaded cationic nanoemulsions for transdermal delivery. Hansen solubility parameters (HSP) screened excipients based on theoretical solubility whereas, QbD optimized cationic nanoemulsions (CNE-TOT-6). Formulation characteristic parameters were desirable to execute targeted in vitro drug release and ex vivo permeation profiles. In vitro hemolysis was conducted at varied concentrations whereas, histopathological study supported the safety aspect of CNE-TOT6. A comparative bioavailability was carried out in a rat model. Capmul PG8 (CAP), tween 80, and PEG 400 (polyethylene glycol 400) were screened based on HSP and experimental solubility data. QbD suggested optimized content of CAP, tween 80, and PEG 400 to achieve the lowest value of size (184 nm), maximum % entrapment efficiency (87.2 %), high zeta potential (+32.6 mV), optimum viscosity (47.19 cP), and high extrudability (96 %) as compared to its gel. High gel consistency slowed down the drug release and permeation flux as compared to CNE-TOT6 suspension. Hemocompatible CNE-TOT6 increased pharmacokinetic parameters as compared to the control and gel without causing skin toxicity after application. Thus, HSPiP and QbD oriented cationic nanoemulsions are promising carriers to treat overactive urinary bladder.

IMPACT: Innovative (nano)Materials and processes for advanced catalytic technologies to degrade PFOA in water.

We hereby report the development of a novel electrochemical method to degrade perfluorooctanoic acid (C7F15COOH, PFOA). At the center of the approach are bimetallic Pd-Ru nano-catalyst materials called IMPACT: Innovative (nano)Materials and Processes for Advanced Catalytic Technologies. IMPACT uses flavonoid-sequestered Pd-Ru, allowing the development of specialized electrodes with tunable properties to sequentially degrade PFOA in wastewater samples into a sustainable byproduct via an indirect electrochemical method. Electron transfers at RuOxHy species stabilize the Pd component of the nano-catalysts, enabling the degradation process via PFOA deprotonation, chain shortening, decarboxylation, hydrolysis, fluoride elimination, and CF2 flake-off mechanism. IMPACT enabled the observation of redox peaks at -0.26 V and 0.56 V for the first time, with accompanying reduction peaks at -0.5V and 0.29 V, respectively. These redox peaks, which correlated with the concentrations of PFOA (20, 50, 100, 200, and 400. mg L-1), were verified and confirmed using electrochemical simulations. Control experiments did not show degradation of PFOA in the absence of Pd-Ru nano-catalyst. The degradation in wastewater was obtained within 3 h with an efficiency of 98.5%. The electrochemical degradation products of PFOA were identified using High-resolution desalting paper spray mass spectrometry (DPS-MS) and collision-induced dissociation (CID) analysis. The results yielded C2F5COOH, C3F7COOH, and C6F13OH with dissociation losses of CF2O or CO2. IMPACT introduces a novel nano-catalyst with high efficiency and a reliable capability that defluorinates strong C-F bonds that are components of recalcitrant organics in myriad environmental matrices.

Comparative Analysis of Laboratory-Scale Immunoglobulin G Purification Methods from Human Serum.

Immunoglobulin G (IgG) purification is a critical process for evaluating its role in autoimmune diseases, which are defined by the occurrence of autoantibodies. Affinity chromatography with protein G is widely considered to be the optimal technique for laboratory-scale purification. However, this technique has some limitations, including the exposure of IgG to low pH, which can compromise the quality of the purified IgG. Here, we show that alternative methods for IgG purification are possible while maintaining the quality of IgG. Different techniques for IgG purification from serum were evaluated and compared with protein G-based approaches: Melon Gel, caprylic acid-ammonium sulfate (CAAS) precipitation, anion-exchange chromatography with diethylamino ethyl (DEAE) following ammonium sulfate (AS) precipitation, and AS precipitation alone. The results demonstrated that the purification yield of these techniques surpassed that of protein G. However, differences in the purity of IgG were observed using GeLC-MS/MS. The avidity of purified IgG against selected targets (SARS-CoV-2 and topoisomerase-I) was similar between purified IgG obtained using all techniques and unpurified sera. Our work provides valuable insights for future studies of IgG function by recommending alternative purification methods that offer advantages in terms of yield, time efficiency, cost-effectiveness, and milder pH conditions than protein G.

Programming of a Portable Digital Monitoring System-Integrated DNA Aptamer Reversely Regulated Oxidase-Like Nanozyme for Real-Time Dynamic Analysis of Atmospheric Perfluorooctanoic Acid.

Timely and efficient analysis of the fluorinated per- and polyfluoroalkyl substances (PFAS) in an atmospheric environment is critical to environmental pollution traceability, early warnings, and governance. Here, a portable, reliable, and intelligent digital monitoring device for onsite real-time dynamic analysis of atmospheric perfluorooctanoic acid (PFOA) is proposed. The sensing mechanism is attributed to the oxidase-like activity of PtCoNPs@g-C3N4 that is reversely regulated by the surface modification of a PFOA-recognizable DNA aptamer, engineering a PFOA-activated oxidase-like activity of nanozyme (Apt-PtCoNPs@g-C3N4) to combine the nonfluorescence o-phenylenediamine (OPD) as the dual-modality response system. The present PFOA interacts with its DNA aptamer and dissociates from the surface of Apt-PtCoNPs@g-C3N4, restoring the oxidase-like activity of PtCoNPs@g-C3N4 to oxidize OPD into yellow fluorescence 2,3-diphenylaniline (DAP), thereby observing a PFOA-triggered colorimetric as well as fluorescence dual-modality change. Then, a hydrogel kit-programmed Apt-PtCoNPs@g-C3N4 + OPD system is used as the sensitive element to incorporate into this homemade portable device, automatically gathering and processing the PFOA-triggered hydrogel colorimetric and fluorescence image gray values by our self-weaving software, ultimately realizing the onsite real-time dynamic analysis of atmospheric PFOA surrounding a fluorochemical production plant. This work provides a direction and theoretical foundation for designing portable onsite screening devices that cater to other atmospheric contaminants detection requirements.

The Synthesis of SNAC Phenolate Salts and the Effect on Oral Bioavailability of Semaglutide.

PURPOSE: Sodium N-[8-(2-hydroxybenzoyl)amino]caprylate (SNAC) is a well-known penetration enhancer widely used in commercial applications. This study aims to broaden its properties through a novel strategy of converting it into its phenolate salts. The objective is to investigate the synthesis of SNAC phenolate salts, specifically SNAC-choline (SNAC-CH), SNAC-sodium (SNAC-Na), and SNAC-phosphatidylcholine (SNAC-PC), and to explore their potential application in improving the oral absorption of semaglutide. METHODS: The synthesis of SNAC phenolate salts was confirmed through 1H-NMR, FTIR, and an elemental analysis of C, H, N, and O. In vivo testing was conducted to assess the oral delivery of semaglutide using these synthesized SNAC phenolate salts. Pharmacokinetic (PK) values were measured to evaluate the impact on drug absorption. RESULTS: The synthesis of SNAC phenolate salts (SNAC-CH, SNAC-Na, and SNAC-PC) was successfully achieved under appropriate conditions, and their structures were confirmed using analytical techniques such as IR, NMR, and CHN elemental analysis. The paradigm of their use was evaluated through an oral pharmacokinetic (PK) in vivo study using SNAC phenolate salts, which did not impair the original SNAC PK values. This suggests that this strategy holds promise as a potential new effective enhancer for oral absorption. CONCLUSIONS: The utilization of SNAC phenolate salts presents a novel and promising strategy for extending the verity of penetration enhancers' molecules and properties. Synthesizing phenolate salts represents a new chemical strategy that may open new avenues in molecular development. This approach holds future potential to enhance the oral delivery of peptide drugs like semaglutide without compromising therapeutic efficacy. Overall, it offers significant advancements in the field by providing a potential alternative to injectable peptides through oral delivery systems.

Supramolecular solvents based on hydrophobic natural deep eutectic solvents and primary amines for preconcentration and determination of enrofloxacin in milk.

In this work, coacervation in primary amines solutions with hydrophobic natural deep eutectic solvents based on terpenoids and carboxylic acids was demonstrated for the first time. A liquid-phase microextraction approach was developed based on supramolecular solvent formation with primary amine acting as amphiphile and hydrophobic deep eutectic solvent making up mixed vesicles and serving as coacervation agent. Such supramolecular solvents could be used to separate wide range of substances from different aqueous media, such as food products, biological liquids and wastewaters. It is important that both hydrophobic and ionic interactions with supramolecular aggregates take place ensuring synergetic effect and better extraction ability, which is significant in separating relatively polar analytes. Different primary amines and deep eutectic solvents were investigated for liquid-phase microextraction of proof-of-concept amphoteric analyte (enrofloxacin, widely used veterinary fluoroquinolone antibiotic) and its determination by high-performance liquid chromatography with fluorescence detection using Shimadzu LC-20 Prominence chromatograph and RF-20A fluorescence detector. It was found that the supramolecular solvent based on 1-nonylamine, formed after addition of a deep eutectic solvent based on menthol and hexanoic acid (molar ratio of 1:1), provided maximum extraction recovery (85 %) and maximum enrichment factor (34). To characterize the extraction system, the composition of the phases was investigated, and cryo-transmission electron microscopy images were obtained. Vesicular aggregates were observed in the supramolecular solvent. The extraction mechanism was proposed in terms of formation of mixed aggregates to capture the analyte. Limit of detection was found to be 7 µg kg-1, while linear range of 20-250 µg kg-1 was established. Relative standard deviation values were lower than 7 %. Relative bias did not exceed 12 %.

Synergistic adsorption and UV degradation of perfluorooctanoic acid by amine-functionalized A-center sphalerite.

Perfluorinated alkylated substances (PFAS), as a category of persistent organic pollutants, have garnered extensive concern due to their resilience against environmental degradation. Herein, we developed an amine-functionalized sphalerite (ZnS) with adjustable surface amine functional groups and Zn defects (ZnS-X%[N]) by in situ coprecipitation and simple hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). This material demonstrated efficient PFAS adsorption and subsequent photo-induced degradation under UV irradiation. The characterization results by TEM, BET, FTIR, XPS and EPR revealed that CTAB primarily influences ZnS by modulating surface amine functionalities, zinc defect density, and enhancing its photoreductive capacity. Adsorption and kinetic degradation experiments further showed that a medium CTAB concentration in ZnS-40%[N] achieves highest PFAS adsorption capacity (Cmax: 0.201 mol kg-1), and the corresponding decomposition rate was the fastest (kde: 1.53; kdf: 1.19). This efficacy is attributed to the ZnS-40%[N]'s ideal adsorptive sites and surface shallow defects. Moreover, theoretical simulation also supports the above experimental inference. Overall, ZnS-X%[N] exhibits a synergistic effect on PFAS adsorption and degradation, showcasing its potential for environmental adaptability and practical application.

Octanoic acid kills Lucilia sericata (Diptera: Calliphoridae) by affecting two major defence systems: cuticular free fatty acids and immunocompetent cells.

This work examines the insecticidal activity of octanoic acid (C8:0), a short-chain fatty acid detected in entomopathogenic fungus - Conidiobolus coronatus medium, against Lucilia sericata larvae and adults. The LD50 value was calculated as 3.04±0.26 µg/mg (3040 mg/kg) of insect body mass, which places the compound in category 5 of acute toxicity (slightly hazardous). The presented research also describes its probable mechanism, with a particular focus on changes in two main insect defense mechanisms: (1) the composition of the cuticle (GC-MS analysis) and (2) immunocompetent cells (microscopic analysis of cultured hemocytes). More precisely, octanoic acid application resulted in changes in cuticular free fatty acid (FFA) profiles in both adults and larvae; generally, treatment increased short-chain FFAs, and a decrease of middle- and long-chain FFAs. Both in vivo and in vitro applications of octanoic acid resulted in vacuolisation, disintegration, and destruction of nets formed by plasmatocytes. As the compound has also previously been found to be toxic against Galleria mellonella, it appears to have lethal potential against insects in both the Orders Diptera and Lepidoptera, indicating it may have strong entomopathogenic potential. It is worth noting that octanoic acid is approved as a food additive with well-documented insecticidal activity, and hence may be a valuable component in the design of new insecticides that are safe for both humans and the environment.

Mechanisms of heating-electrokinetic co-driven perfluorooctanoic acid (PFOA) adsorption on zeolite.

Slow release of emerging contaminants limits their accessibility from soil to pore water, constraining the treatment efficiency of physio-chemical treatment sites. DC fields mobilize organic contaminants and influence their interactions with geo-matrices such as zeolites. Poor knowledge, however, exists on the joint application of heating and electrokinetic approaches on perfluorooctanoic acid (PFOA) transport in porous media. Here, we investigated electrokinetic PFOA transport in zeolite-filled percolation columns at varying temperatures. Variations of pseudo-second-order kinetic constants (kPSO) were correlated to the liquid viscosity variations (η) and elctroosmotic flow velocities (vEOF). Applying DC fields and elevated temperature significantly (>37%) decreased PFOA sorption to zeolite. A good correlation between η, vEOF, and kPSO was found and used to develop an approach interlinking the three parameters to predict the joint effects of DC fields and temperature on PFOA sorption kinetics. These findings may give rise to future applications for better tailoring PFOA transport in environmental biotechnology.

Adsorption behaviors of perfluorooctanoic acid on aged microplastics.

The presence of perfluoroalkyl substances (PFAS) in the environment poses a significant threat to ecological safety and environmental health. Widespread microplastics (MPs) have been recognized as vectors for emerging contaminants due to human activities. However, the adsorption behaviors of PFAS on MPs, especially on aged MPs, have not been extensively investigated. This study aimed to investigate the adsorption behaviors of perfluorooctanoic acid (PFOA) on aged MPs (polystyrene, polyethylene, and polyethylene terephthalate) treated with UV irradiation and persulfate oxidation under salinity and dissolve organic matter (DOM) condition. Carbonyl index values of MPs increased after the aged treatment, indicating the production of oxygen-containing groups. The PFOA adsorption on aged MPs was impacted by the co-existence of Na+ ions and DOM. As PFOA adsorption onto aged MPs was mainly controlled by hydrophobic interaction, the electrostatic interaction also made a contribution, but there was no significant change in PFOA adsorption behavior between the pristine and aged MPs. While these findings provide insight into PFAS adsorption on aged MPs, further research is necessary to account for the complexity of the real environment. PRACTITIONER POINTS: Adsorption behaviors of perfluorooctanoic acid (PFOA) on aged microplastics were investigated. Hydrophobic interaction mainly controlled PFOA adsorption on aged microplastics (MPs). Co-existence dissolve organic matter and salinity influenced PFOA adsorption behaviors on aged MPs.

Vesicles exhibit high-performance removal of per-and polyfluoroalkyl substances (PFAS) depending on their hydrophobic groups.

The removal of per- and polyfluoroalkyl substances (PFAS) from drinking water is urgently needed. Here, we demonstrated high performance of vesicles on PFAS adsorption. Vesicles used in this study were enclosed amphiphile bilayers keeping their hydrophobic groups inside and their hydrophilic groups outside in water. The distribution coefficient Kd of perfluorooctane sulfonic acid (PFOS) for vesicles was 5.3 × 105 L/kg, which is higher than that for granulated activated carbon (GAC), and Kd of perfluorooctanoic acid (PFOA) for vesicles was 103-104 L/kg. The removal efficiencies of PFOA and PFOS adsorption on DMPC vesicles were 97.1 ± 0.1% and 99.4 ± 0.2%, respectively. The adsorption behaviors of PFOA and PFOS on vesicles were investigated by changing the number of cis-double bonds in the hydrophobic chains of the vesicle constituents. Moreover, vesicles formed by membranes in the different phases were also tested. The results revealed that, when vesicles are formed of a membrane in the liquid-crystalline (liquid-like) phase, the adsorption amounts of both PFOA and PFOS increased as the cis-double bond in the hydrocarbon chains decreased, which is considered due to molecular shape similarity. When vesicles are formed of a membrane in the gel (solid-like) phase, they do not adsorb PFAS as much as in the liquid-crystalline phase, even though the hydrocarbon chains do not have any cis-double bond. Our findings demonstrate that vesicles can be utilized as PFAS adsorbents by optimizing the structure of vesicle constituents and their thermodynamical phase. Indeed, the vesicles (DMPC) were demonstrated that they can adsorb PFOA and PFOS, and be coagulated by a coagulant even in environmental water. The coagulation will enable the removal of PFOA and PFOS from the water after adsorption.

Effect of electrolyte composition on electrocatalytic transformation of perfluorooctanoic acid (PFOA) in high pH medium.

Recent regulatory actions aim to limit per- and polyfluoroalkyl substances (PFAS) concentrations in drinking water and wastewaters. Regenerable anion exchange resin (AER) is an effective separation process to remove PFAS from water but will require PFAS post-treatment of the regeneration wastestream. Electrocatalytic (EC) processes using chemically boron-doped diamond electrodes, stable in a wide range of chemical compositions show potential to defluorinate PFOA in drinking water and wastewater treatments. Chemical composition and concentration of mineral salts in supporting electrolytes affect AER regeneration efficiency, and play a crucial role in the EC processes. Their impact on PFAS degradation remains understudied. This study investigates the impact of 17 brine electrolytes with different compositions on perfluorooctanoic acid (PFOA) degradation in an alkaline medium and explores the correlation between the rate of PFOA degradation and the solution's conductivity. Results show that higher electrolyte concentrations and conductivity lead to faster PFOA degradation rates. The presence of chloride anions have negligible impact on the degradation rate. However, the presence of nitrate salts reduce PFOA degradation efficiency. Additionally, the use of mixed electrolytes may be a promising approach for reducing the cost of EC operations. PFOA degradation was not influenced by the pH of the bulk solution.

Lanthanide metal-organic frameworks as ratiometric fluorescent probes for real-time monitoring of PFOA photocatalytic degradation process.

The assessment of perfluorooctanoic acid (PFOA) photocatalytic degradation usually involves tedious pre-treatment and sophisticated instrumentation, making it impractical to evaluate the degradation process in real-time. Herein, we synthesized a series of lanthanide metal-organic frameworks (Ln-MOFs) with outstanding fluorescent sensing properties and applied them as luminescent probes in the photocatalytic degradation reaction of PFOA for real-time evaluation. As the catalytic reaction proceeds, the fluorescence color changes significantly from green to orange-red due to the different interaction mechanisms between the electron-deficient PFOA and smaller radius F- with the ratiometric fluorescent probe MOF-76 (Tb: Eu = 29:1). The limit of detection (LOD) was calculated to be 0.0127 mM for PFOA and 0.00746 mM for F-. In addition, the conversion rate of the catalytic reaction can be read directly based on the chromaticity value by establishing a three-dimensional relationship graph of G/R value-conversion rate-time (G/R indicates the ratio between green and red luminance values in the image.), allowing for real-time and rapid tracking of the PFOA degradation. The recoveries of PFOA and F- in the actual water samples were 99.3-102.7% (RSD = 2.2-4.4%) and 100.7-105.3% (RSD = 3.9-6.8%), respectively. Both theoretical calculations and experiments reveal that the detection mechanism was attributed to the photoinduced electron transfer and energy transfer between the analytes and the probe. This method simplifies the sample analysis process and avoids the use of bulky instruments, and thus has great potential on the design and development of quantitative time-resolved visualization methods to assess catalytic performance and reveal mechanisms.

High-throughput, low-cost quantification of 11 therapeutic antibodies using caprylic acid precipitation and LC-MS/MS.

BACKGROUND: Therapeutic drug monitoring of treatment with therapeutic antibodies is hampered by the application of a wide range of different methods in the quantification of serum levels. LC-MS based methods could significantly improve comparability of results from different laboratories, but such methods are often considered complicated and costly. We developed a method for LC-MS/MS based quantification of 11 therapeutic antibodies concomitantly measured in a single run, with emphasis on simplicity in sample preparation and low cost. RESULTS: After a single-step sample purification using caprylic acid precipitation to remove interfering proteins, the sample underwent proteolysis followed by LC-MS/MS analysis. Infliximab is used as internal standard for sample preparation while isotope-labeled signature peptides identified for each analyte are internal standards for the LC-MS/MS normalization. The method was validated according to recognized guidelines, and pipetting steps can be performed by automated liquid handling systems. The total precision of the method ranged between 2.7 and 7.3 % (5.1 % average) across the quantification range of 4-256 µg/ml for all 11 drugs, with an average accuracy of 96.3 %. Matrix effects were xamined in 55 individual patient samples instead of the recommended 6, and 147 individual patient samples were screened for interfering compounds. SIGNIFICANCE AND NOVELTY: Our method for simultaneous quantification of 11 t-mAb in human serum allows an unprecedented integration of robustness, speed and reduced complexity, which could pave the way for uniform use in research projects and clinical settings alike. In addition, the first LC-MS protocol for signature peptide-based quantification of durvalumab is described. This high throughput method can be readily adapted to a drug panel of choice.

Prehydrated Electrons Activated by Continuous Electron Transfer Stemmed from Peracetic Acid Homolysis Mediated by Diamond Surface Defects for Enhanced PFOA Destruction.

Research on the use of peracetic acid (PAA) activated by nonmetal solid catalysts for the removal of dissolved refractory organic compounds has gained attention recently due to its improved efficiency and suitability for advanced water treatment (AWT). Among these catalysts, nanocarbon (NC) stands out as an exceptional example. In the NC-based peroxide AWT studies, the focus on the mechanism involving multimedia coordination on the NC surface (reactive species (RS) path, electron reduction non-RS pathway, and singlet oxygen non-RS path) has been confined to the one-step electron reaction, leaving the mechanisms of multichannel or continuous electron transfer paths unexplored. Moreover, there are very few studies that have identified the nonfree radical pathway initiated by electron transfer within PAA AWT. In this study, the complete decomposition (kobs = 0.1995) and significant defluorination of perfluorooctanoic acid (PFOA, deF% = 72%) through PAA/NC has been confirmed. Through the use of multiple electrochemical monitors and the exploration of current diffusion effects, the process of electron reception and conduction stimulated by PAA activation was examined, leading to the discovery of the dynamic process from the PAA molecule → NC solid surface → target object. The vital role of prehydrated electrons (epre-) before the entry of resolvable electrons into the aqueous phase was also detailed. To the best of our knowledge, this is the first instance of identifying the nonradical mechanism of continuous electron transfer in PAA-based AWT, which deviates from the previously identified mechanisms of singlet oxygen, single-electron, or double-electron single-path transfer. The pathway, along with the strong reducibility of epre- initiated by this pathway, has been proven to be essential in reducing the need for catalysts and chemicals in AWT.

Mobilization of per- and poly-fluoroalkyl substances (PFAS) in soils with different organic matter contents.

There is considerable interest in addressing soils contaminated with per- and polyfluoroalkyl substances (PFAS) because of the PFAS in the environment and associated health risks. The neutralization of PFAS in situ is challenging. Consequently, mobilizing the PFAS from the contaminated soils into an aqueous solution for subsequent handling has been pursued. Nonetheless, the efficiency of mobilization methods for removing PFAS can vary depending on site-specific factors, including the types and concentrations of PFAS compounds, soil characteristics. In the present study, the removal of perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS) from artificially contaminated soils was investigated in a 2D laboratory setup using electrokinetic (EK) remediation and hydraulic flushing by applying a hydraulic gradient (HG) for a duration of 15 days. The percent removal of PFOA by EK was consistent (∼80%) after a 15-day treatment for all soils. The removal efficiency of PFOS by EK significantly varied with the OM content, where the PFOS removal increased from 14% at 5% OM to 60% at 50% OM. With HG, the percent removal increased for both PFOA and PFOS from about 20% at 5% OM up to 80% at 75% OM. Based on the results, the mobilization of PFAS from organic soil would be appropriate using both hydraulic flushing and EK considering their applicability and advantages over each other for site-specific factors and requirements.

A multi-platform approach for the comprehensive analysis of per- and polyfluoroalkyl substances (PFAS) and fluorine mass balance in commercial ski wax products.

The unique properties of per- and polyfluoroalkyl substances (PFAS) have led to their extensive use in consumer products, including ski wax. Based on the risks associated with PFAS, and to align with PFAS regulations, the international ski federation (FIS) implemented a ban on products containing "C8 fluorocarbons/perfluorooctanoate (PFOA)" at all FIS events from the 2021/2022 season, leading manufactures to shift their formulations towards short-chain PFAS chemistries. To date, most studies characterising PFAS in ski waxes have measured a suite of individual substances using targeted analytical approaches. However, the fraction of total fluorine (TF) in the wax accounted for by these substances remains unclear. In this study, we sought to address this question by applying a multi-platform, fluorine mass balance approach to a total of 10 commercially available ski wax products. Analysis of TF by combustion ion chromatography (CIC) revealed concentrations of 1040-51700 µg F g-1 for the different fluorinated waxes. In comparison, extractable organic fluorine (EOF) determined in methanol extracts by CIC (and later confirmed by inductively-coupled plasma-mass spectrometry and 19F- nuclear magnetic resonance spectroscopy) ranged from 92 to 3160 µg g-1, accounting for only 3-8.8 % of total fluorine (TF). Further characterisation of extracts by cyclic ion mobility-mass spectrometry (IMS) revealed 15 individual PFAS with perfluoroalkyl carboxylic acid concentrations up to 33 µg F g-1, and 3 products exceeding the regulatory limit for PFOA (0.025 µg g-1) by a factor of up to 100. The sum of all PFAS accounted for only 0.01-1.0 % of EOF, implying a high percentage of unidentified PFAS, thus, pyrolysis gas chromatography-mass spectrometry was used to provide evidence of the nature of the non-extractable fluorine present in the ski wax products.

PFAS transport under lower water-saturation conditions characterized with instrumented-column systems.

The transport of PFOS and PFOA in well-characterized sand was investigated for relatively low water saturations. An instrumented column was used for some experiments to provide real-time in-situ monitoring of water saturation and matric potential. The results showed that water saturations and matric potentials varied minimally during the experiments. Flow rates were monitored continuously and were essentially constant. These results demonstrate that surfactant-induced flow and other nonideal hydraulic processes did not materially impact PFAS transport for the experiment conditions. Air-water interfacial adsorption was demonstrated to provide the great majority of retention for PFOS and PFOA. Retention was significantly greater at the lower water saturations (0.35-0.45) compared to the higher saturations (∼0.66) for both PFAS, due to the larger extant air-water interfacial areas. Retardation factors were 5 and 3-times greater at the lower water saturations for PFOS and PFOA, respectively. Early breakthrough was observed for the PFAS but not for the non-reactive tracers at the lower water saturations, indicating the possibility that air-water interfacial adsorption was rate-limited to some degree. Independently determined retention parameters were used to predict retardation factors for PFOS and PFOA, which were similar to the measured values in all cases. The consistency between the predicted and measured values indicates that PFAS retention was accurately represented. In addition, air-water interfacial adsorption coefficients measured from the transport experiments were consistent with independently measured equilibrium-based values. Based on these results, it appears that the air-water interfacial adsorption processes mediating the magnitude of PFOS and PFOA retention under lower water-saturation conditions are consistent with those for higher water saturations. This provides some confidence that our understanding of PFAS retention obtained from work conducted at higher water saturations is applicable to lower water saturations.