Metamorphic meta isomer: carbon dioxide and ketenes are formed via retro-Diels-Alder reactions in the decomposition of meta-benzenediol.

The deoxygenation reaction of m-benzenediol (resorcinol), an important lignin model compound, was studied in a hot microreactor. We revealed three decomposition channels by detecting elusive and reactive intermediates and product isomers selectively and found that resorcinol, similarly to catechol (o-benzenediol) and hydroquinone (p-benzenediol), (i) gets decarbonylated to yield hydroxycyclopentadiene. Additionally, (ii) decarboxylation (CO2 loss) yields C5H6 species in a retro-Diels-Alder reaction from a lactone species. Only acyclic products are detected at lower reactor temperatures and the most stable C5H6 isomer, cyclopentadiene (c-C5H6), is only observed at higher temperatures. Finally, (iii) two reactive ketene species, ethenone and buta-1,3-dienal, were observed in a third reaction channel. Both decarboxylation and ketene formation channels are unique among benzenediols for the meta-isomer, resorcinol. We have explored the resorcinol potential energy surface to rationalize the observed reactions. These findings may help to understand the source of ketenes in catalytic lignin depolymerization and give new insight into isomer-specific deoxygenation processes.

Water, Ions, and Hemoglobin: Effects on Allostery and Polymerization.

Proteins that function in aqueous solution can be perturbed by the solvent. Here we present experimental studies on two such interactions in the hemoglobin molecule. (1) Hemoglobin's oxygen binding is altered by introduction of crowding species or osmoticants, such as sucrose, through the linked binding of ions such as Cl or CO2, but not otherwise. This rules out a significant role of buried surface in the allosteric energetics. (2) Sickle hemoglobin (HbS) polymerizes more readily in high concentrations of phosphate buffer. Such polymerization is analyzed quantitatively here for the first time in terms of the double nucleation mechanism. The changes in solubility are found to account for the increase in monomer addition rates and nucleation rates without requiring additional parameter adjustments. In the analysis, we also show how the analytical formulation of HbS nucleation may be adapted to include water that occupies the interstices between the assembled molecules. While such a "correction" has been applied to the equilibrium process, it has not previously been applied to the nucleation process.

The Possible Emergence of Life and Differentiation of a Shallow Biosphere on Irradiated Icy Worlds: The Example of Europa.

Irradiated ice-covered ocean worlds with rocky mafic mantles may provide the conditions needed to drive the emergence and maintenance of life. Alkaline hydrothermal springs-relieving the geophysical, thermal, and chemical disequilibria between oceans and tidally stressed crusts-could generate inorganic barriers to the otherwise uncontrolled and kinetically disfavored oxidation of hydrothermal hydrogen and methane. Ionic gradients imposed across these inorganic barriers, comprising iron oxyhydroxides and sulfides, could drive the hydrogenation of carbon dioxide and the oxidation of methane through thermodynamically favorable metabolic pathways leading to early life-forms. In such chemostatic environments, fuels may eventually outweigh oxidants. Ice-covered oceans are primarily heated from below, creating convection that could transport putative microbial cells and cellular cooperatives upward to congregate beneath an ice shell, potentially giving rise to a highly focused shallow biosphere. It is here where electron acceptors, ultimately derived from the irradiated surface, could be delivered to such life-forms through exchange with the icy surface. Such zones would act as "electron disposal units" for the biosphere, and occupants might be transferred toward the surface by buoyant diapirs and even entrained into plumes. Key Words: Biofilms-Europa-Extraterrestrial life-Hydrothermal systems. Astrobiology 17, 1265-1273.

Chemical gas-generating nanoparticles for tumor-targeted ultrasound imaging and ultrasound-triggered drug delivery.

Although there is great versatility of ultrasound (US) technologies in the real clinical field, one main technical challenge is the compromising of high quality of echo properties and size engineering of ultrasound contrast agents (UCAs); a high echo property is offset by reducing particle size. Herein, a new strategy for overcoming the dilemma by devising chemical gas (CO2) generating carbonate copolymer nanoparticles (Gas-NPs), which are clearly distinguished from the conventional gas-encapsulated micro-sized UCAs. More importantly, Gas-NPs could be readily engineered to strengthen the desirable in vivo physicochemical properties for nano-sized drug carriers with higher tumor targeting ability, as well as the high quality of echo properties for tumor-targeted US imaging. In tumor-bearing mice, anticancer drug-loaded Gas-NPs showed the desirable theranostic functions for US-triggered drug delivery, even after i.v. injection. In this regard, and as demonstrated in the aforementioned study, our technology could serve a highly effective platform in building theranostic UCAs with great sophistication and therapeutic applicability in tumor-targeted US imaging and US-triggered drug delivery.

Effect of Gold Particle Size on Steam Reforming of Methanol Over Au/CeO2-ZrO2 Catalysts.

We examined the effect of the particle size of gold on steam reforming of methanol over Au/CeO2-ZrO2 catalysts. Gold was loaded onto CeO2-ZrO2 through deposition-precipitation. The average particle size (2-12 nm) of the gold was controlled by thermal reduction under H2 at various temperatures and by chemical reduction with various reducing agents. The catalytic activity decreased significantly with increasing particle size of the gold. The turnover frequency at the interface between gold and a support appeared to be independent of particle size in the range 2-5 nm, which implies that the perimeter of the particle may be the active site for this reaction. Methanol adsorption and conversion over these catalysts were also investigated with in-situ diffuse reflectance infrared Fourier transform spectroscopy. Analytical results for various adsorbed intermediate species during methanol conversion suggests that transformation of methoxy species is facilitated by use of smaller gold particles.

Photosynthetic membrane-less microbial fuel cells to enhance microalgal biomass concentration.

The aim of this study was to quantitatively assess the net increase in microalgal biomass concentration induced by photosynthetic microbial fuel cells (PMFC). The experiment was conducted on six lab-scale PMFC constituted by an anodic chamber simulating an anaerobic digester connected to a cathodic chamber consisting of a mixed algae consortia culture. Three PMFC were operated at closed circuit (PMFC(+)) whereas three PMFC were left unconnected as control (PMFC(-)). PMFC(+) produced a higher amount of carbon dioxide as a product of the organic matter oxidation that resulted in 1.5-3 times higher biomass concentration at the cathode compartment when compared to PMFC(-).

High energy ball milling and supercritical carbon dioxide impregnation as co-processing methods to improve dissolution of tadalafil.

Tadalafil (TD) is a crystalline drug of a high melting point (Tm=299°C) and limited solubility in water (<5µg/mL). These properties may result in reduced and variable bioavailability after oral administration. Since the melting of TD is followed by its decomposition, the drug processing at high temperatures is limited. The aim of the research is, therefore, to improve the dissolution of TD by its co-processing with the hydrophilic polymer Soluplus® (SL) at temperatures below 40°C. In this study, two methods, i.e. high energy ball-milling and supercritical carbon dioxide impregnation (scCO2) are compared, with the aim to predict their suitability for the vitrification of TD. The influence of the amount of SL and the kind of co-processing method on TD thermal properties is analyzed. The results show that only the high energy ball milling process makes it possible to obtain a completely amorphous form of TD, with the characteristic X-ray 'halo' pattern. The intensity of the Bragg peaks diminishes for all the formulations treated with scCO2, but these samples remain crystalline. The MDSC results show that high energy ball milling is capable of forcing the mixing of TD and SL at a molecular level, providing a homogeneous amorphous solid solution. The glass transition temperatures (Tg), determined for the co-milled formulations, range from 79°C to 139°C and they are higher than Tg of pure SL (ca. 70°C) and lower than Tg of pure TD (ca. 149°C). In contrast to the co-milled formulations which are in the form of powder, all the formulations after scCO2 impregnation form a hard residue, sticking to the reaction vessel, which needs to be ground before analysis or further processing. Finally, the dissolution studies show that not only has SL a beneficial effect on the amount of TD dissolved, but also both co-processing methods make the dissolution enhancement of TD possible. After co-processing by scCO2, the amount of TD dissolved increases with the decreasing amount of SL, whereas in the case of the co-milled formulations, the higher the amount of SL in the glassy solution is, the higher the amount of TD dissolved.

An efficient and environment-friendly method of removing graphene oxide in wastewater and its degradation mechanisms.

Graphene and graphene oxide (GO) have already existed in air, water and soil due to their popular application in functional materials. However, degradation of graphene and GO in wastewater has not been reported. Degradation of GO plays a key role in the elimination of graphene and GO in wastewater due to graphene being easily oxidized to GO. In this paper, GO was completely degraded to give CO2 by Photo-Fenton. The degradation intermediates were determined by UV-vis absorption spectra, elemental analysis (EA), fourier transform infrared (FT-IR) and liquid chromatography-mass spectrometry (LC-MS). Experimental results showed that graphene oxide was completely degraded to give CO2 after 28 days. Based on UV, FT-IR, LC-MS spectra and EA data of these degradation intermediates, the degradation mechanisms of GO were supposed. This paper suggests an efficient and environment-friendly method to degrade GO and graphene.

Synthesis of Diverse (11)C-Labeled PET Radiotracers via Direct Incorporation of [(11)C]CO2.

Three new positron emission tomography (PET) radiotracers of interest to our functional neuroimaging and translational oncology programs have been prepared through new developments in [(11)C]CO2 fixation chemistry. [(11)C]QZ (glutaminyl cyclase) was prepared via a tandem trapping of [(11)C]CO2/intramolecular cyclization; [(11)C]tideglusib (glycogen synthase kinase-3) was synthesized through a tandem trapping of [(11)C]CO2 followed by an intermolecular cycloaddition between a [(11)C]isocyanate and an isothiocyanate to form the 1,2,4-thiadiazolidine-3,5-dione core; [(11)C]ibrutinib (Bruton's tyrosine kinase) was synthesized through a HATU peptide coupling of an amino precursor with [(11)C]acrylic acid (generated from [(11)C]CO2 fixation with vinylmagnesium bromide). All radiochemical syntheses are fully automated on commercial radiochemical synthesis modules and provide radiotracers in 1-5% radiochemical yield (noncorrected, based upon [(11)C]CO2). All three radiotracers have advanced to rodent imaging studies and preliminary PET imaging results are also reported.

Tracking solvent and protein movement during CO2 release in carbonic anhydrase II crystals.

Carbonic anhydrases are mostly zinc metalloenzymes that catalyze the reversible hydration/dehydration of CO2/HCO3 (-) Previously, the X-ray crystal structures of CO2-bound holo (zinc-bound) and apo (zinc-free) human carbonic anhydrase IIs (hCA IIs) were captured at high resolution. Here, we present sequential timeframe structures of holo- [T = 0 s (CO2-bound), 50 s, 3 min, 10 min, 25 min, and 1 h] and apo-hCA IIs [T = 0 s, 50 s, 3 min, and 10 min] during the "slow" release of CO2 Two active site waters, WDW (deep water) and WDW' (this study), replace the vacated space created on CO2 release, and another water, WI (intermediate water), is seen to translocate to the proton wire position W1. In addition, on the rim of the active site pocket, a water W2' (this study), in close proximity to residue His64 and W2, gradually exits the active site, whereas His64 concurrently rotates from pointing away ("out") to pointing toward ("in") active site rotameric conformation. This study provides for the first time, to our knowledge, structural "snapshots" of hCA II intermediate states during the formation of the His64-mediated proton wire that is induced as CO2 is released. Comparison of the holo- and apo-hCA II structures shows that the solvent network rearrangements require the presence of the zinc ion.

Supercritical carbon dioxide-assisted rapid synthesis of few-layer black phosphorus for hydrogen peroxide sensing.

Solutions with large-scale dispersions of 2D black phosphorus (BP), often referred to as phosphorene, are obtained through solvent exfoliation. But, rapid phosphorene synthesis remains a challenge. Furthermore, although the chemical sensing capability of BP-based sensors has been theoretically predicted, its experimental verification remains lacking. In this study, we demonstrate the use of supercritical carbon dioxide-assisted rapid synthesis (5h) of few-layer BP. In addition, we construct a non-enzymatic hydrogen peroxide (H2O2) sensor based on few-layer BP for the first time to utilize BP degradation under ambient conditions. The proposed H2O2 sensor exhibits a considerably lower detection limit of 1 × 10(-7) M compared with the general detection limit of 1 × 10(-7) M-5 × 10(-5)M via electrochemical methods. Overall, the results of this study will not only expand the coverage of BP research but will also identify the important sensing characteristics of BP.

Carbon dioxide generated from carbonates and acids for sampling blood-feeding arthropods.

Carbon dioxide (CO2) is utilized to attract mosquitoes and other blood-feeding arthropods to traps around the world. Commercial forms of CO2 (e.g., dry ice and compressed gas) are often unavailable or extremely expensive in developing nations, where vector surveillance is essential to make life-saving decisions. We developed and tested inexpensive and reproducible methods of CO2 production from the combination of acids and carbonates, ranging from very basic (crushed seashells and vinegar) to relatively elaborate (a device that controls the timing of the acid-carbonate reaction and extends the reaction over several hours). When utilized with mosquito traps in Florida, USA and black fly traps in Region des Cascades, Burkina Faso, these carbonate-acid CO2 sources attracted significantly greater numbers of both vector groups, than did unbaited traps. CO2 was generated for more than four hours at levels sufficient to attract vectors over the entire period. The utility of this simple methodology in developing nations should be further evaluated.

CH4 combustion cycles at Pd/Al2O3--important role of support and oxygen access.

This research is focused on the analysis of adsorbed CH4 intermediates at oxidized Pd9 nanoparticles supported on γ-alumina. From first-principle density functional theory calculations, several configurations, charge transfer and electronic density of states have been analyzed in order to determine feasible paths for the oxidation process. Methane oxidation cycles have been considered as a further step at differently oxidized Pd nanoparticles. For low oxidized Pd nanoparticles, activation of methane is observed, whereby hydrogen from methane is adsorbed at one oxygen atom. This reaction is exothermic with adsorption energy equal to -0.38 eV. In a subsequent step, desorption of two water molecules is observed. Additionally, a very interesting structural effect is evident, mainly Pd-carbide formation, which is also an exothermic reaction with an energy of -0.65 eV. Furthermore, oxidation of such carbidized Pd nanoparticles leads to CO2 formation, which is an endothermic reaction. Important result is that the support is involved in CO2 formation. A different mechanism of methane oxidation has been found for highly oxidized Pd nanoparticles. When the Pd nanoparticle is more strongly exposed to oxidative conditions, adsorption of methane is also possible, but it will proceed with carbonic acid production at the interface between Pd nanoparticles and support. However, this step is endothermic.

An in situ spatially resolved analytical technique to simultaneously probe gas phase reactions and temperature within the packed bed of a plug flow reactor.

This paper reports the detailed description and validation of a fully automated, computer controlled analytical method to spatially probe the gas composition and thermal characteristics in packed bed systems. As an exemplar, we have examined a heterogeneously catalysed gas phase reaction within the bed of a powdered oxide supported metal catalyst. The design of the gas sampling and the temperature recording systems are disclosed. A stationary capillary with holes drilled in its wall and a moveable reactor coupled with a mass spectrometer are used to enable sampling and analysis. This method has been designed to limit the invasiveness of the probe on the reactor by using the smallest combination of thermocouple and capillary which can be employed practically. An 80 µm (O.D.) thermocouple has been inserted in a 250 µm (O.D.) capillary. The thermocouple is aligned with the sampling holes to enable both the gas composition and temperature profiles to be simultaneously measured at equivalent spatially resolved positions. This analysis technique has been validated by studying CO oxidation over a 1% Pt/Al2O3 catalyst and the spatial resolution profiles of chemical species concentrations and temperature as a function of the axial position within the catalyst bed are reported.

Production of [11C]CO2 with gas target at low proton energies.

Nowadays the demand and the installation of self-shielded low-energy cyclotrons is growing, allowing the use of (11)C in many more centers. The aim of this study was the design of a new target and the evaluation of the production of (11)C as [(11)C]CO2 at low proton energies. The target was coupled to an IBA Cyclone-18/9 and the energy was decreased to 4-16 MeV. The newly designed target allowed the production of [(11)C]CO2 at different proton energies, and the results suggest that the cyclotron energy of Cyclone-18/9 is slightly higher than the nominal 18 MeV.

Palladium-catalyzed decarboxylative cross-coupling reactions: a route for regioselective functionalization of coumarins.

A straightforward, regioselective, and step-economical ligand-free palladium-catalyzed decarboxylative functionalization of coumarin-3-carboxylic acids is devised. This protocol is compatible with a wide variety of electron-donating and -withdrawing substituents and allows for construction of various biologically important π-electron extended coumarins.

CO oxidation on h-BN supported Au atom.

The mechanism of CO oxidation by O(2) on Au atoms supported on the pristine and defected hexagonal boron nitride (h-BN) surface has been studied theoretically using density functional theory. It is found that O(2) binds stronger than CO on an Au atom supported on the defect free h-BN surface and h-BN surface with nitrogen vacancy (V(N)@h-BN), but weaker than CO on a free Au atom or Au trapped by a boron vacancy (V(B)@h-BN). The excess of the positive or negative charge on Au can considerably change its catalytic properties and enhance activation of the adsorbed O(2). Coadsorption of CO and O(2) on Au, Au/V(N)@h-BN, and Au/V(B)@h-BN results in additional charge transfer to O(2). Various pathways of the CO oxidation reaction by molecular oxygen are studied. We found two different pathways for CO oxidation: a two-step pathway where two CO(2) molecules are formed independently, and a self-promotion pathway where oxidation of the first CO molecule is promoted by the second CO molecule. Interaction of Au with the defect-free and defected h-BN surface considerably affects the CO oxidation reaction pathways and barriers. Therefore, Au supported on the h-BN surface (pristine or defected) cannot be considered as pseudo-free atom and support effects have to be taken into account, even when the interaction of Au with the support is weak.