An injectable active hydrogel based on BMSC-derived extracellular matrix for cartilage regeneration enhancement.

Articular cartilage injury impairs joint function and necessitates orthopedic intervention to restore the structure and function of the cartilage. Extracellular matrix (ECM) scaffolds derived from bone marrow mesenchymal stem cells (BMSCs) can effectively promote cell adhesion, proliferation, and chondrogenesis. However, pre-shaped ECM scaffolds have limited applicability due to their poor fit with the irregular surface of most articular cartilage defects. In this study, we fabricated an injectable active ECM hydrogel from autologous BMSCs-derived ECM by freeze-drying, liquid nitrogen milling, and enzymatic digestion. Moreover, our in vitro and in vivo results demonstrated that the prepared hydrogel enhanced chondrocyte adhesion and proliferation, chondrogenesis, cartilage regeneration, and integration with host tissue, respectively. These findings indicate that active ECM components can provide trophic support for cell proliferation and differentiation, restoring the structure and function of damaged cartilage.

Regeneration: Bone-Marrow Stimulation of the Talus-Limits and Goals.

Bone Marrow Stimulation of osteochondral lesions of the talus has been shown to be a successful way to treat cartilage injuries. Newer data suggest that Bone Marrow Stimulation is best reserved for osteochondral lesions of the talus Sizes Less Than 107.4 mm2 in area. Additionally, newer smaller and deeper techniques to perform bone marrow stimulation have resulted in less subchondral bone damage, less cancellous compaction, and superior bone marrow access with multiple trabecular access channels. Biologic adjuvants such as platelet-rich plasma (PRP), hyaluronic acid (HA), and bone marrow aspirate concentrate (BMAC) may lead to better functional outcomes when used concomitant to bone marrow stimulation.

Computational modelling of articular joints with biphasic cartilage: recent advances, challenges and opportunities.

Biphasic models have been widely used to simulate the time-dependent biomechanical response of soft tissues. Modelling techniques of joints with biphasic weight-bearing soft tissues have been markedly improved over the last decade, enhancing our understanding of the function, degenerative mechanism and outcomes of interventions of joints. This paper reviews the recent advances, challenges and opportunities in computational models of joints with biphasic weight-bearing soft tissues. The review begins with an introduction of the function and degeneration of joints from a biomechanical aspect. Different constitutive models of articular cartilage, in particular biphasic materials, are illustrated in the context of the study of contact mechanics in joints. Approaches, advances and major findings of biphasic models of the hip and knee are presented, followed by a discussion of the challenges awaiting to be addressed, including the convergence issue, high computational cost and inadequate validation. Finally, opportunities and clinical insights in the areas of subject-specific modeling and tissue engineering are provided and discussed.

Regeneration: AT-AMIC Technique: Limits and Indication.

Osteochondral lesion of the talus (OLT) is a commune cause of chronic ankle pain. Symptomatic lesions require surgical treatment. Currently, lesions with diameter less than 107.4 mm2 are treated with bone marrow stimulating technique with notable success rate. However, more extensive lesions show less predictable surgical results. Autologous matrix-induced chondrogenesis has proven to provide satisfactory medium and long-term results on OLTs. In the current review, we describe an all-arthroscopic technique and the Milan-Tel Aviv lesion assessment protocol.

[Effects of removing superficial layer of cartilage on the surface morphology and mechanical behavior of cartilage].

Superficial cartilage defect is an important factor that causes osteoarthritis. Therefore, it is very important to investigate the influence of superficial cartilage defects on its surface morphology and mechanical properties. In this study, the knee joint cartilage samples of adult pig were prepared, which were treated by enzymolysis with chymotrypsin and physical removal with electric friction pen, respectively. Normal cartilage and surface treated cartilage were divided into five groups: control group (normal cartilage group), chymotrypsin immersion group, chymotrypsin wiping group, removal 10% group with electric friction pen, and removal 20% group with electric friction pen. The surface morphology and structure of five groups of samples were characterized by laser spectrum confocal microscopy and environmental field scanning electron microscopy, and the mechanical properties of each group of samples were evaluated by tensile tests. The results show that the surface arithmetic mean height and fracture strength of the control group were the smallest, and the fracture strain was the largest. The surface arithmetic mean height and fracture strength of the removal 20% group with electric friction pen were the largest, and the fracture strain was the smallest. The surface arithmetic mean height, fracture strength and fracture strain values of the other three groups were all between the above two groups, but the surface arithmetic mean height and fracture strength of the removal 10% group with electric friction pen, the chymotrypsin wiping group and the chymotrypsin soaking group decreased successively, and the fracture strain increased successively. In addition, we carried out a study on the elastic modulus of different groups, and the results showed that the elastic modulus of the control group was the smallest, and the elastic modulus of the removal 20% group with electric friction pen was the largest. The above study revealed that the defect of the superficial area of cartilage changed its surface morphology and structure, and reduced its mechanical properties. The research results are of great significance for the prevention and repair of cartilage injury.

Quantification of Cartilage Poroelastic Material Properties Via Analysis of Loading-Induced Cell Death.

Articular cartilage (AC) is a load-bearing tissue that covers long bones in synovial joints. The biphasic/poroelastic mechanical properties of AC help it to protect joints by distributing loads, absorbing impact forces, and reducing friction. Unfortunately, alterations in these mechanical properties adversely impact cartilage function and precede joint degeneration in the form of osteoarthritis (OA). Thus, understanding what factors regulate the poroelastic mechanical properties of cartilage is of great scientific and clinical interest. Transgenic mouse models provide a valuable platform to delineate how specific genes contribute to cartilage mechanical properties. However, the poroelastic mechanical properties of murine articular cartilage are challenging to measure due to its small size (thickness ∼ 50 microns). In the current study, our objective was to test whether the poroelastic mechanical properties of murine articular cartilage can be determined based solely on time-dependent cell death measurements under constant loading conditions. We hypothesized that in murine articular cartilage subjected to constant, sub-impact loading from an incongruent surface, cell death area and tissue strain are closely correlated. We further hypothesized that the relationship between cell death area and tissue strain can be used-in combination with inverse finite element modeling-to compute poroelastic mechanical properties. To test these hypotheses, murine cartilage-on-bone explants from different anatomical locations were subjected to constant loading conditions by an incongruent surface in a custom device. Cell death area increased over time and scaled linearly with strain, which rose in magnitude over time due to poroelastic creep. Thus, we were able to infer tissue strain from cell death area measurements. Moreover, using tissue strain values inferred from cell death area measurements, we applied an inverse finite element modeling procedure to compute poroelastic material properties and acquired data consistent with previous studies. Collectively, our findings demonstrate in the key role poroelastic creep plays in mediating cell survival in mechanically loaded cartilage and verify that cell death area can be used as a surrogate measure of tissue strain that enables determination of murine cartilage mechanical properties.

Regular Running Is Related to the Knee Joint Cartilage Structure in Healthy Adults.

PURPOSE: The purpose of this study was to determine whether regular running distance and biomechanics are related to medial central femur cartilage (MCFC) structure. METHODS: The cross-sectional study sample consisted of 1164 runners and nonrunners aged 18-65 yr. Participants completed questionnaires on physical activity and their running history. We performed quantitative magnetic resonance imaging of knee cartilage-T2 relaxation time (T2) mapping (high T2 indicates cartilage degeneration)-and a running biomechanical analysis using a three-dimensional motion capture system. A 14-d monitoring of the physical activity was conducted. RESULTS: Those aged 35-49 yr were at 84% higher odds of having MCFC T2 in the highest level (85th percentile, P < 0.05) compared with youngest adults indicating that MCFC structures may be altered with aging. Being male was associated with 34% lower odds of having T2 at the highest level ( P < 0.05) compared with females. Nonrunners and runners with the highest weekly running distance were more likely to have a high T2 compared with runners with running distance of 6-20 km·wk -1 ( P < 0.05). In addition, the maximal knee internal adduction moment was associated with a 19% lower odds of having T2 at the highest level ( P < 0.05). CONCLUSIONS: Females compared with males and a middle-aged cohort compared with the younger cohort seemed to be associated with the degeneration of MCFC structures. Runners who ran 6-20 km·wk -1 were associated with a higher quality of their MCFC compared with highly active individuals and nonrunners. Knee frontal plane biomechanics was related to MCFC structure indicating a possibility of modifying the medial knee collagen fibril network through regular running.

Impact of degeneration and material pairings on cartilage friction: Cartilage versus glass.

The association of knee joint osteoarthritis and altered frictional properties of the degenerated cartilage remains ambiguous, because previous in vitro studies did not consider the characteristic loads and velocities during gait. Therefore, the aim of this study was to quantify the friction behavior of degenerated human cartilage under characteristic stance and swing phase conditions. A dynamic pin-on-plate tribometer was used to test the tribological systems of cartilage against cartilage and cartilage against glass, both with synthetic synovial fluid as lubricant. Using the International Cartilage Repair Society classification, the cartilage samples were assigned to a mildly or a severely degenerated group before testing. Friction coefficients were calculated under stance and swing phase conditions at the beginning of the test and after 600 s of testing. The most important finding of this study is that cartilage against glass couplings displayed significantly higher friction for the severely degenerated samples compared to the mildly degenerated ones, whereas cartilage against cartilage couplings only indicated slight tendencies under the observed test conditions. Consequently, care should be taken when transferring in vitro findings from cartilage against cartilage couplings to predict the friction behavior in vivo. Therefore, we recommend in vitro tribological testing methods which account for gait-like loading conditions and to replicate physiological material pairings, particularly in preclinical medical device validation studies.

Pericellular Matrix Formation and Atomic Force Microscopy of Single Primary Human Chondrocytes Cultured in Alginate Microgels.

One of the main components of articular cartilage is the chondrocyte's pericellular matrix (PCM), which is critical for regulating mechanotransduction, biochemical cues, and healthy cartilage development. Here, individual primary human chondrocytes (PHC) are encapsulated and cultured in 50 µm diameter alginate microgels using drop-based microfluidics. This unique culturing method enables PCM formation and manipulation of individual cells. Over ten days, matrix formation is observed using autofluorescence imaging, and the elastic moduli of isolated cells are measured using AFM. Matrix production and elastic modulus increase are observed for the chondrons cultured in microgels. Furthermore, the elastic modulus of cells grown in microgels increases ≈ten-fold over ten days, nearly reaching the elastic modulus of in vivo PCM. The AFM data is further analyzed using a Gaussian mixture model and shows that the population of PHCs grown in microgels exhibit two distinct populations with elastic moduli averaging 9.0 and 38.0 kPa. Overall, this work shows that microgels provide an excellent culture platform for the growth and isolation of PHCs, enabling PCM formation that is mechanically similar to native PCM. The microgel culture platform presented here has the potential to revolutionize cartilage regeneration procedures through the inclusion of in vitro developed PCM.

Using Decellularized Magnetic Microrobots to Deliver Functional Cells for Cartilage Regeneration.

The use of natural cartilage extracellular matrix (ECM) has gained widespread attention in the field of cartilage tissue engineering. However, current approaches for delivering functional scaffolds for osteoarthritis (OA) therapy rely on knee surgery, which is limited by the narrow and complex structure of the articular cavity and carries the risk of injuring surrounding tissues. This work introduces a novel cell microcarrier, magnetized cartilage ECM-derived scaffolds (M-CEDSs), which are derived from decellularized natural porcine cartilage ECM. Human bone marrow mesenchymal stem cells are selected for their therapeutic potential in OA treatments. Owing to their natural composition, M-CEDSs have a biomechanical environment similar to that of human cartilage and can efficiently load functional cells while maintaining high mobility. The cells are released spontaneously at a target location for at least 20 days. Furthermore, cell-seeded M-CEDSs show better knee joint function recovery than control groups 3 weeks after surgery in preclinical experiments, and ex vivo experiments reveal that M-CEDSs can rapidly aggregate inside tissue samples. This work demonstrates the use of decellularized microrobots for cell delivery and their in vivo therapeutic effects in preclinical tests.

Positive outcomes following Autologous Matrix-Induced Chondrogenesis (AMIC) in the treatment of retropatellar chondral lesions: a retrospective analysis of a patient registry.

BACKGROUND: The patellofemoral joint is a challenging environment for treating chondral defects. Among the surgical options for the treatment of chondral defects, the single-stage Autologous Matrix-Induced Chondrogenesis (AMIC) procedure uses a porcine collagen I/III membrane to enhance bone-marrow stimulation. However, longer term outcomes data are rare for this specific indication. In order to provide real-world information, an ongoing registry has been established to record patient data and outcomes when AMIC is used to treat chondral and osteochondral lesions. METHODS: Patient data were retrieved from an ongoing, prospective, multisite registry of patients who had undergone AMIC treatment of chondral defects. We identified 64 patients who had undergone AMIC for patellofemoral chondral defects and for whom pre-operative and at least 1 post-operative score were available were included in this retrospective data analysis. Outcomes were assessed via the KOOS, VAS pain, and the Lysholm scores. Outcomes at the post-operative time-points were analysed using a factorial ANOVA with post-hoc testing while linear regression was used to assess associations between the change in the Lysholm score and lesion size. RESULTS: There was a significant improvement in Lysholm, VAS pain, and KOOS scores from pre-operative to the 1st year post-operative (p < 0.001), and this was maintained during the follow-up. CONCLUSIONS: The forces exerted on the patellofemoral joint make this a challenging scenario for chondral repair. Our data demonstrates that the AMIC procedure with a collagen I/III membrane is an effective treatment for retropatellar cartilage lesions, and provides reliable results, with decreased pain and improved function. Importantly, these improvements were maintained through the follow-up period.

Engineered biomechanical microenvironment of articular chondrocytes based on heterogeneous GelMA hydrogel composites and dynamic mechanical compression.

Tissue-engineered articular cartilage constructs are currently not able to equal native tissues in terms of mechanical and biological properties. A major cause lies in the deficiency in engineering the biomechanical microenvironment (BMME) of articular chondrocytes. In this work, to engineer the BMME of articular chondrocytes, heterogeneous hydrogel structures of gelatin methacrylated (GelMA) containing differential-stiffness domains were first fabricated, and then periodic dynamic mechanical stimulations were applied to the hydrogel structures. The chondrocyte phenotype of ATDC5 cells was enhanced as the spatial differentiation in stiffness was increased in the hydrogel structures and was further strengthened by dynamic mechanical stimulation. It was speculated that the mechanical signals generated by the engineered BMME were sensed by the cells through the integrin ß1-FAK signaling pathway. This study revealed the key role of the combined effects of differential and dynamic BMME on the chondrocyte phenotype, which could provide theoretical guidance for highly active tissue-engineered articular cartilage.

Arthritic Microenvironment-Dictated Fate Decisions for Stem Cells in Cartilage Repair.

The microenvironment and stem cell fate guidance of post-traumatic articular cartilage regeneration is primarily the focus of cartilage tissue engineering. In articular cartilage, stem cells are characterized by overlapping lineages and uneven effectiveness. Within the first 12 weeks after trauma, the articular inflammatory microenvironment (AIME) plays a decisive role in determining the fate of stem cells and cartilage. The development of fibrocartilage and osteophyte hyperplasia is an adverse outcome of chronic inflammation, which results from an imbalance in the AIME during the cartilage tissue repair process. In this review, the sources for the different types of stem cells and their fate are summarized. The main pathophysiological events that occur within the AIME as well as their protagonists are also discussed. Additionally, regulatory strategies that may guide the fate of stem cells within the AIME are proposed. Finally, strategies that provide insight into AIME pathophysiology are discussed and the design of new materials that match the post-traumatic progress of AIME pathophysiology in a spatial and temporal manner is guided. Thus, by regulating an appropriately modified inflammatory microenvironment, efficient stem cell-mediated tissue repair may be achieved.

Harnessing knee joint resident mesenchymal stem cells in cartilage tissue engineering.

Osteoarthritis (OA) is a widespread clinical disease characterized by cartilage degeneration in middle-aged and elderly people. Currently, there is no effective treatment for OA apart from total joint replacement in advanced stages. Mesenchymal stem cells (MSCs) are a type of adult stem cell with diverse differentiation capabilities and immunomodulatory potentials. MSCs are known to effectively regulate the cartilage microenvironment, promote cartilage regeneration, and alleviate OA symptoms. As a result, they are promising sources of cells for OA therapy. Recent studies have revealed the presence of resident MSCs in synovial fluid, synovial membrane, and articular cartilage, which can be collected as knee joint-derived MSCs (KJD-MSC). Several preclinical and clinical studies have demonstrated that KJD-MSCs have great potential for OA treatment, whether applied alone, in combination with biomaterials, or as exocrine MSCs. In this article, we will review the characteristics of MSCs in the joints, including their cytological characteristics, such as proliferation, cartilage differentiation, and immunomodulatory abilities, as well as the biological function of MSC exosomes. We will also discuss the use of tissue engineering in OA treatment and introduce the concept of a new generation of stem cell-based tissue engineering therapy, including the use of engineering, gene therapy, and gene editing techniques to create KJD-MSCs or KJD-MSC derivative exosomes with improved functionality and targeted delivery. These advances aim to maximize the efficiency of cartilage tissue engineering and provide new strategies to overcome the bottleneck of OA therapy. STATEMENT OF SIGNIFICANCE: This research will provide new insights into the medicinal benefit of Joint resident Mesenchymal Stem Cells (MSCs), specifically on its cartilage tissue engineering ability. Through this review, the community will further realize promoting joint resident mesenchymal stem cells, especially cartilage progenitor/MSC-like progenitor cells (CPSC), as a preventive measure against osteoarthritis and cartilage injury. People and medical institutions may also consider cartilage derived MSC as an alternative approach against cartilage degeneration. Moreover, the discussion presented in this study will convey valuable information for future research that will explore the medicinal benefits of cartilage derived MSC.

Prochondrogenic effect of decellularized extracellular matrix secreted from human induced pluripotent stem cell-derived chondrocytes.

Cartilage is mainly composed of chondrocytes and the extracellular matrix (ECM), which transmits important biochemical and biomechanical signals necessary for differentiation and homeostasis. Human articular cartilage has a low ability for regeneration because it lacks blood vessels, nerves, and lymphatic vessels. Currently, cell therapeutics, including stem cells, provide a promising strategy for cartilage regeneration and treatment; however, there are various hurdles to overcome, such as immune rejection and teratoma formation. In this study, we assessed the applicability of stem cell-derived chondrocyte ECM for cartilage regeneration. Human induced pluripotent stem cell (hiPSC)-derived chondrocytes (iChondrocytes) were differentiated, and decellularized ECM (dECM) was successfully isolated from cultured chondrocytes. Isolated dECM enhanced the in vitro chondrogenesis of iPSCs when recellularized. Implanted dECM also restored osteochondral defects in a rat osteoarthritis model. A possible association with the glycogen synthase kinase-3 beta (GSK3ß) pathway demonstrated the fate-determining importance of dECM in regulating cell differentiation. Collectively, we suggest the prochondrogenic effect of hiPSC-derived cartilage-like dECM and offer a promising approach of a noncellular therapeutic for articular cartilage reconstruction without cell transplantation. STATEMENT OF SIGNIFICANCE: Human articular cartilage has low ability for regeneration and cell culture-based therapeutics could aid cartilage regeneration. Yet, the applicability of human induced pluripotent stem cell-derived chondrocyte (iChondrocyte) extracellular matrix (ECM) has not been elucidated. Therefore, we first differentiated iChondrocytes and isolated the secreted ECM by decellularization. Recellularization was performed to confirm the pro-chondrogenic effect of the decellularized ECM (dECM). In addition, we confirmed the possibility of cartilage repair by transplanting the dECM into the cartilage defect in osteochondral defect rat knee joint. We believe that our proof-of-concept study will serve as a basis for investigating the potential of dECM obtained from iPSC-derived differentiated cells as a non-cellular resource for tissue regeneration and other future applications.

Computational assessment on the impact of collagen fiber orientation in cartilages on healthy and arthritic knee kinetics/kinematics.

BACKGROUND: The inhomogeneous distribution of collagen fiber in cartilage can substantially influence the knee kinematics. This becomes vital for understanding the mechanical response of soft tissues, and cartilage deterioration including osteoarthritis (OA). Though the conventional computational models consider geometrical heterogeneity along with fiber reinforcements in the cartilage model as material heterogeneity, the influence of fiber orientation on knee kinetics and kinematics is not fully explored. This work examines how the collagen fiber orientation in the cartilage affects the healthy (intact knee) and arthritic knee response over multiple gait activities like running and walking. METHODS: A 3D finite element knee joint model is used to compute the articular cartilage response during the gait cycle. A fiber-reinforced porous hyper elastic (FRPHE) material is used to model the soft tissue. A split-line pattern is used to implement the fiber orientation in femoral and tibial cartilage. Four distinct intact cartilage models and three OA models are simulated to assess the impact of the orientation of collagen fibers in a depth wise direction. The cartilage models with fibers oriented in parallel, perpendicular, and inclined to the articular surface are investigated for multiple knee kinematics and kinetics. FINDINGS: The comparison of models with fiber orientation parallel to articulating surface for walking and running gait has the highest elastic stress and fluid pressure compared with inclined and perpendicular fiber-oriented models. Also, the maximum contact pressure is observed to be higher in the case of intact models during the walking cycle than for OA models. In contrast, the maximum contact pressure is higher during running in OA models than in intact models. Additionally, parallel-oriented models produce higher maximum stresses and fluid pressure for walking and running gait than proximal-distal-oriented models. Interestingly, during the walking cycle, the maximum contact pressure with intact models is approximately three times higher than on OA models. In contrast, the OA models exhibit higher contact pressure during the running cycle. INTERPRETATION: Overall, the study indicates that collagen orientation is crucial for tissue responsiveness. This investigation provides insights into the development of tailored implants.

Development and experimental validation of a dynamic numerical model for human articular cartilage.

The purpose of this study was to create a preliminary set of experimentally validated Finite Element Analysis (FEA) models, in order to predict the dynamic mechanical behaviour of human articular cartilage (AC). Current models consider static loading with limited independent experimental validation, while the models for this study assess dynamic loading of AC, with direct comparison and validation to physical testing. Three different FEA models of AC were constructed, which considered both linear elastic and hyperelastic models; Neo-Hookean and Ogden. Models were validated using the data collected from compression testing of human femoral heads across 0-1.7 MPa (quasi-static tests and dynamic mechanical analysis). The linear elastic model was inadequate, with a 10-fold over prediction of the displacement dynamic amplitude. The Neo-Hookean model accurately predicted the dynamic amplitude but failed to predict the initial compression of the cartilage, with a 10 times overprediction. The Ogden model provided the best results, with both the initial compression lying within one standard deviation of that observed in the validation data set, and the dynamic amplitude of the same order of magnitude. In conclusion, this study has found that the fast dynamic response of human AC is best represented by a third order Ogden model.

Incorporation of Magnesium Ions into an Aptamer-Functionalized ECM Bioactive Scaffold for Articular Cartilage Regeneration.

The regeneration and reconstruction of articular cartilage (AC) after a defect are often difficult. The key to the treatment of AC defects lies in regeneration of the defect site and regulation of the inflammatory response. In this investigation, a bioactive multifunctional scaffold was formulated using the aptamer Apt19S as a mediator for mesenchymal stem cell (MSC)-specific recruitment and the enhancement of cellular chondrogenic and inflammatory regulation through the incorporation of Mg2+. Apt19S, which can recruit MSCs in vitro and in vivo, was chemically conjugated to a decellularized cartilage extracellular matrix (ECM)-lysed scaffold. The results from in vitro experiments using the resulting scaffold demonstrated that the inclusion of Mg2+ could stimulate not only the chondrogenic differentiation of synovial MSCs but also the increased polarization of macrophages toward the M2 phenotype. Additionally, Mg2+ inhibited NLRP3 inflammasome activation, thereby decreasing chondrocyte pyroptosis. Subsequently, Mg2+ was incorporated into the bioactive multifunctional scaffold, and the resulting scaffold promoted cartilage regeneration in vivo. In conclusion, this study confirms that the combination of Mg2+ and aptamer-functionalized ECM scaffolds is a promising strategy for AC regeneration based on in situ tissue engineering and early inflammatory regulation.

Immunohistochemical characterization of the mandibular condyle for type I and II collagen, aggrecan, MMP-9, and MMP-13 in MMP-2-deficient mice.

Mice devoid of matrix metalloproteinase (MMP)-2 due to gene targeting have been reported to show articular cartilage destruction in the knee joint; however, the phenotype of the mandibular condylar cartilage remains unknown. Thus, in the present study, we investigated the mandibular condyle in Mmp2-/- mice. We obtained and bred Mmp2-/- mice from the same source as the previous study, and performed genotyping using genomic DNA extracted from finger snips. The mandibular condyle of Mmp2-/- mice and wild-type (WT) mice was immunohistochemically examined for the localization of extracellular matrix (ECM) proteins (type I and II collagen, and aggrecan), and MMP-9 and MMP-13. No cartilage destruction was observed in the mandibular condyle of Mmp2-/- mice, and no difference was found in the localization of the ECM proteins between the Mmp2-/- mice and WT mice. However, the bone marrow cavity in the subchondral bone of the mandibular condyle was more distinct in Mmp2-/- mice than in WT mice at the age of 50 weeks. Of note, MMP-9 characteristically localized in multinucleated cells in the mandibular condyle in 50-week-old Mmp2-/- mice. MMP-2 may be involved in the regulation of osteoclast differentiation and the formation of the bone marrow cavity in aged mice.

Characterizing site-specific mechanical properties of knee cartilage with indentation-relaxation maps and machine learning.

Knee cartilage experiences site-specific focal lesion and degeneration, which is likely associated with tissue inhomogeneity and nonuniform mechanical stimuli in the joint, for which a complete picture remains to be depicted. The present study aimed to develop a methodology to quantify knee cartilage inhomogeneity using porcine knee specimens. Automated indentation-relaxation and needle probing were performed on fully intact cartilage to obtain data that essentially represent continuous distributions of cartilage properties in the knee. Machine learning was then introduced to approximate the tissue inhomogeneity with several regions via clusters of indentation locations, and finite element modeling was used to obtain poromechanical properties for each region using indentation-relaxation and thickness data. Significant region dependence was established from the full time-dependent mechanical response. Seventeen regions, or clusters, were found to best approximate the site-specific poromechanical properties of articular cartilage for femoral groove, lateral and medial condyles and tibial plateaus, after up to eight clusters were tested for each of the five cartilage sections. The region partitions recommended, and tissue properties acquired would facilitate implementation of tissue inhomogeneity in future applications, e.g., contact modeling of the knee joint. The results obtained from 14 porcine knees revealed interesting region differences, for example, the two condyles have the same effective stiffness when responding to slowly applied mechanical loadings but substantially lower stiffness in the medial condyle when responding to fast loadings. This mechanical behavior may be associated with the fact that medial femoral cartilage is more prone to focal lesions than the lateral one.