Injectable Tannin-Containing Hydroxypropyl Chitin Hydrogel as Novel Bioactive Pulp Capping Material Accelerates Repair of Inflamed Dental Pulp.

Conventional pulp capping materials have limited anti-inflammatory capacity. It is necessary to develop more effective pulp capping material for the treatment of inflamed pulps. Tannic acid (TA) is a natural, water-soluble polyphenol with antimicrobial and anti-inflammatory properties. This study aimed to investigate the effects of a tannin-containing hydroxypropyl chitin hydrogel (HPCH/TA hydrogel) as an innovative pulp capping material. The physicochemical properties of the composite hydrogels were characterized. The effects of HPCH/TA hydrogel as a pulp capping material were evaluated in vitro and in vivo. The underlying mechanism of the anti-inflammatory effects of HPCH/TA hydrogel was explored. The HPCH/TA hydrogel demonstrated favorable temperature sensitivity, injectability, and antibacterial properties. In vitro, the HPCH/TA hydrogel effectively promoted the proliferation of human dental pulp cells and inhibited interleukin-1ß, interleukin-6, and tumor necrosis factor-α expression, possibly by suppressing the nuclear factor kappa-B pathway. In vivo, on the fourth day after capping, the HPCH/TA hydrogel group showed lower inflammatory scores compared to the control and iRoot BP Plus (commercial pulp capping material) group. By the sixth week, complete reparative dentin formation was observed in the HPCH/TA hydrogel group, with no difference in thickness compared to the iRoot BP Plus group. Collectively, the HPCH/TA hydrogel holds promise as a bioactive pulp capping material for promoting the repair of inflamed pulp in vital pulp therapy.

Display of Bacterial Exochitanase on Bacillus subtilis Spores Improved Enzyme Stability and Recyclability.

Chitin is the second most prevalent polysaccharide found in nature, following cellulose. Amino-oligosaccharides, the byproducts of chitin degradation, exhibit favorable biological properties and potential for various uses. Chitinases play a crucial function in the breakdown of chitin, and their exceptionally effective production has garnered significant interest. Here, in this study, the exochitinase PbChiA, obtained from Paenibacillus barengoltzii, was recombinantly produced and immobilized using the CotG surface protein of Bacillus subtilis WB800N. The resulting strain Bacillus subtilis WB800N pHS-CotG-Chi exhibited exceptional heat stability and efficacy across various pH levels. The chitinolytic activity of the enzyme, which had been isolated and immobilized on the spore surface, was measured to be approximately 16.06 U/mL. Including Ni2+, Zn+2, and K+, and EDTA at various concentration levels in the reaction system, has significantly enhanced the activity of the immobilized enzyme. The immobilized exochitinase demonstrated a notable rate of recycling, as the recombinant spores sustained a relative enzyme activity of more than 70% after three cycles and 62.7% after four cycles. These findings established a basis for additional investigation into the role and practical use of the immobilized bacterial exochitinase in industry.

Molecular architecture of chitin and chitosan-dominated cell walls in zygomycetous fungal pathogens by solid-state NMR.

Zygomycetous fungal infections pose an emerging medical threat among individuals with compromised immunity and metabolic abnormalities. Our pathophysiological understanding of these infections, particularly the role of fungal cell walls in growth and immune response, remains limited. Here we conducted multidimensional solid-state NMR analysis to examine cell walls in five Mucorales species, including key mucormycosis causative agents like Rhizopus and Mucor species. We show that the rigid core of the cell wall primarily comprises highly polymorphic chitin and chitosan, with minimal quantities of ß-glucans linked to a specific chitin subtype. Chitosan emerges as a pivotal molecule preserving hydration and dynamics. Some proteins are entrapped within this semi-crystalline chitin/chitosan layer, stabilized by the sidechains of hydrophobic amino acid residues, and situated distantly from ß-glucans. The mobile domain contains galactan- and mannan-based polysaccharides, along with polymeric α-fucoses. Treatment with the chitin synthase inhibitor nikkomycin removes the ß-glucan-chitin/chitosan complex, leaving the other chitin and chitosan allomorphs untouched while simultaneously thickening and rigidifying the cell wall. These findings shed light on the organization of Mucorales cell walls and emphasize the necessity for a deeper understanding of the diverse families of chitin synthases and deacetylases as potential targets for novel antifungal therapies.

Genomics, Proteomics, and Antifungal Activity of Chitinase from the Antarctic Marine Bacterium Curtobacterium sp. CBMAI 2942.

This study aimed to evaluate the genomic profile of the Antarctic marine Curtobacterium sp. CBMAI 2942, as well as to optimize the conditions for chitinase production and antifungal potential for biological control. Assembly and annotation of the genome confirmed the genomic potential for chitinase synthesis, revealing two ChBDs of chitin binding (Chi C). The optimization enzyme production using an experimental design resulted in a 3.7-fold increase in chitinase production. The chitinase enzyme was identified by SDS-PAGE and confirmed through mass spectrometry analysis. The enzymatic extract obtained using acetone showed antifungal activity against the phytopathogenic fungus Aspergillus sp. series Nigri CBMAI 1846. The genetic capability of Curtobacterium sp. CBMAI 2942 for chitin degradation was confirmed through genomic analysis. The basal culture medium was adjusted, and the chitinase produced by this isolate from Antarctica showed significant inhibition against Aspergillus sp. Nigri series CBMAI 1846, which is a tomato phytopathogenic fungus. This suggests that this marine bacterium could potentially be used as a biological control of agricultural pests.

Enhanced degradation of insoluble chitin: Engineering high-efficiency chitinase fusion enzymes for sustainable applications.

N-acetyl-D-glucosamine and its dimer are degradation products of chitin waste with great potential in therapeutic and agricultural applications. However, the hydrolysis of insoluble chitin by chitinases remains a major bottleneck. This study investigated the biochemical properties and catalytic mechanisms of PoChi chitinase obtained from Penicillium oxalicum with a focus on enhancing its efficiency during the degradation of insoluble chitin. Recombinant plasmids were engineered to incorporate chitin-binding (ChBD) and/or fibronectin III (FnIII) domains. Notably, PoChi-FnIII-ChBD exhibited the highest substrate affinity (Km = 2.7 mg/mL) and a specific activity of 15.4 U/mg, which surpasses those of previously reported chitinases. These findings highlight the potential of engineered chitinases in advancing industrial biotechnology applications and offer a promising approach to more sustainable chitin waste management.

Marine Collagen and Chitin: Promising Applications in Interdisciplinary Fields.

Marine collagen and chitin derived from marine organisms are gaining significant attention for their diverse applications across various fields [...].

Chitin-Assisted Synthesis of CuS Composite Sponge for Bacterial Capture and Near-Infrared-Promoted Healing of Infected Diabetic Wounds.

Diabetic wounds are prone to recurrent infections, often leading to delayed healing. To address this challenge, we developed a chitin-copper sulfide (CuS@CH) composite sponge, which combines bacterial trapping with near-infrared (NIR) activated phototherapy for treating infected diabetic wounds. CuS nanoparticles were synthesized and incorporated in situ within the sponge using a chitin assisted biomineralization strategy. The positively charged chitin surface effectively adhered bacteria, while NIR irradiation of CuS generated reactive oxygen species (ROS) heat and Cu2+ to rapidly damage the trapped bacteria. This synergistic effect resulted in an exceptional antibacterial performance against E. coli (∼99.9%) and S. aureus (∼99.3%). The bactericidal mechanism involved NIR-induced glutathione oxidation, membrane lipid peroxidation, and increased membrane permeability. In diabetic mouse models, the CuS@CH sponge accelerated the wound healing of S. aureus infected wounds by facilitating collagen deposition and reducing inflammation. Furthermore, the sponge demonstrated good biocompatibility. This dual-functional platform integrating bacterial capture and NIR-triggered phototherapy shows promise as an antibacterial wound dressing to promote healing of infected diabetic wound.

Isolation and characterization of Saccharomyces cerevisiae mutants with increased cell wall chitin using fluorescence-activated cell sorting.

Yeast cell wall chitin has been shown to bind grape pathogenesis-related chitinases that are the primary cause of protein haze in wines, suggesting that yeast cell walls may be applied for haze protection. Here, we present a high-throughput screen to identify yeast strains with high cell wall chitin using a reiterative enrichment strategy and fluorescence-activated cell sorting of cells labelled with either GFP-tagged chitinase or Calcofluor white. To assess the validity of the strategy, we first used a pooled deletion strain library of Saccharomyces cerevisiae. The strategy enriched for deletion mutants with genes that had previously been described as having an impact on chitin levels. Genes that had not previously been linked to chitin biosynthesis or deposition were also identified. These genes are involved in cell wall maintenance and/or membrane trafficking functions. The strategy was then applied to a mutagenized population of a commercial wine yeast strain, S. cerevisiae EC1118. Enriched mutant strains showed significantly higher cell wall chitin than the wild type and significantly reduced the activity of chitinases in synthetic model wine, suggesting that these strains may be able to reduce haze formation in wine.

Nanomaterial-Encapsulated dsRNA-Targeting Chitin Pathway─A Potential Efficient and Eco-Friendly Strategy against Cotton Aphid, Aphis gossypii (Hemiptera: Aphididae).

The r-strategy pests are very challenging to effectively control because of their rapid population growth and strong resurgence potential and are more prone to developing pesticide resistance. As a typical r-strategy pest, the cosmopolitan cotton aphid, Aphis gossypii Glover, seriously impacts the growth and production of cucurbits and cotton. The present study developed a SPc/double-stranded RNA (dsRNA)/botanical strategy to enhance the control efficacy of A. gossypii. The results demonstrated that the expression of two chitin pathway genes AgCHS2 and AgHK2 notably changed in A. gossypii after treated by three botanical pesticides, 1% azadirachtin, 1% matrine, and 5% eucalyptol. SPc nanocarrier could significantly enhance the environmental stability, cuticle penetration, and interference efficiency of dsRNA products. The SPc/dsRNA/botanical complex could obviously increase the mortality of A. gossypii in both laboratory and greenhouse conditions. This study provides an eco-friendly control technique for enhanced mortality of A. gossypii and lower application of chemical pesticides. Given the conservative feature of chitin pathway genes, this strategy would also shed light on the promotion of management strategies against other r-strategy pests using dsRNA/botanical complex nanopesticides.

Comparative Analysis of the Aspergillus fumigatus Cell Wall Modification and Ensuing Human Dendritic Cell Responses by ß-(1,3)-Glucan Synthase Inhibitors-Caspofungin and Enfumafungin.

Caspofungin, a lipopeptide, is an antifungal drug that belong to the class of echinocandin. It inhibits fungal cell wall ß-(1,3)-glucan synthase activity and is the second-line of drug for invasive aspergillosis, a fatal infection caused mainly by Aspergillus fumigatus. On the other hand, Enfumafungin is a natural triterpene glycoside also with a ß-(1,3)-glucan synthase inhibitory activity and reported to have antifungal potential. In the present study, we compared the growth as well as modifications in the A. fumigatus cell wall upon treatment with Caspofungin or Enfumafungin, consequentially their immunomodulatory capacity on human dendritic cells. Caspofungin initially inhibited the growth of A. fumigatus, but the effect was lost over time. By contrast, Enfumafungin inhibited this fungal growth for the duration investigated. Both Caspofungin and Enfumafungin caused a decrease in the cell wall ß-(1,3)-glucan content with a compensatory increase in the chitin, and to a minor extent they also affected cell wall galactose content. Treatment with these two antifungals did not result in the exposure of ß-(1,3)-glucan on A. fumigatus mycelial surface. Enzymatic digestion suggested a modification of ß-(1,3)-glucan structure, specifically its branching, upon Enfumafungin treatment. While there was no difference in the immunostimulatory capacity of antifungal treated A. fumigatus conidia, alkali soluble-fractions from Caspofungin treated mycelia weakly stimulated the dendritic cells, possibly due to an increased content of immunosuppressive polysaccharide galactosaminogalactan. Overall, we demonstrate a novel mechanism that Enfumafungin not only inhibits ß-(1,3)-glucan synthase activity, but also causes modifications in the structure of ß-(1,3)-glucan in the A. fumigatus cell wall.

Turning black soldier fly rearing by-products into valuable materials: Valorisation through chitin and chitin nanocrystals production.

The industry of insect-based proteins as feed and food products has been encountering a huge development since the last decade, and industrial-scale factories are now arising worldwide. Among all the species studied, Black Soldier Fly is one of the most promising and farmed. This rearing activity generates several by-products in the form of chitin-rich biomass that can be valorised to keep a virtuous production cycle embedded in the scope of the bioeconomy. Herein, we report the isolation of chitin and, for the first time, chitin nanocrystals (ChNCs) from all the BSF rearing by-products, i.e., moults (larval exuviae, puparium) and dead adults. Extraction yields, were dependent on the type of by-products and ranged from 5.8 % to 20.0 %, and the chemical structure of the extracts exhibited typical features of α-chitin, confirmed by FTIR, NMR, XRD and TGA analysis. Both STEM in SEM and AFM analysis confirmed the isolation of chitin nanocrystals presenting a rod-like morphology. The average nanocrystal height estimated by AFM ranged from 13 to 27 nm depending on the by-product sample. The following results highlighted the potential of BSF rearing by-products, promoting an approach to valorise those industrial waste and paving the way towards insect-based biorefinery.

Advances in extraction, utilization, and development of chitin/chitosan and its derivatives from shrimp shell waste.

Shrimp consumption is in great demand among the seafood used globally. However, this expansion has resulted in the substantial generation and disposal of shrimp shell waste. Through literature search, it has been observed that since 2020, global scholars have shown unprecedented interest in shrimp shell waste and its chitin/chitosan. However, these new insights lack corresponding and comprehensive summarization and analysis. Therefore, this article provides a detailed review of the extraction methods, applications, and the latest research developments on chitin/chitosan from shrimp shells, including micro-nano derivatives, from 2020 to the present. The results indicate that chemical extraction remains the primary technique for the extraction and preparation of chitin/chitosan from shrimp shells. With further refinement and development, adjusting parameters in the chemical extraction process or employing auxiliary techniques such as microwave and radiation enable the customization of target products with different characteristics (e.g., deacetylation degree, molecular weight, and degree of acetylation) according to specific needs. Additionally, in pursuit of environmentally friendly, efficient, and gentle extraction processes, recent research has shifted toward microbial fermentation and green solvent methods for chitin/chitosan extraction. Beyond the traditional antibacterial, film-forming, and encapsulation functionalities, research into the applications of chitosan in biomedical, food processing, new materials, water treatment, and adsorption fields is gradually deepening. Chitin/chitosan derivatives and their modified products have also been a focal point of research in recent years. However, with the rapid expansion, the future development of chitin/chitosan and its derivatives still faces challenges related to the unclear mechanism of action and the complexities associated with industrial scale-up.

Composite suture material based on polylactide accelerates the healing of surgical wounds in in vivo experiment.

In laboratory conditions, composite sutures based on polylactide (PLA) containing chitin nanofibrils modified with polyethylene glycol (CN-PEG) and poviargol (silver nanoparticles stabilized with poly(N-vinylpyrrolidone)) were obtained, studied, and used as a prototype. Surgical sutures threads with the addition of CN-PEG have stable mechanical properties both in air and in a buffer simulating the environment of a living organism. The yield strength of oriented threads decreased by an average of 15%, whereas for non-oriented threads the decrease was 3-4 times. The strength values in simple units of unfilled PLA, PLA containing 5 wt % CN-PEG, and PLA with 1 wt % Poviargol were on average 50% higher than the national standard 31620-2012. The results of in vivo experiments on albino rats (cross-linking skin and muscle tissue in the linea alba area) showed that composite sutures are best for suturing muscle tissue, whereas unfilled PLA sutures are more suitable for suturing skin. When suturing muscle tissue, suturing with composite sutures increased the number of collagen fibers of different diameters.

Green extraction of chitin from hard spider crab shells.

A green protocol to extract chitin from crab shells using water soluble ionic liquids (ILs) is here reported. Compared to conventional multistep acid-base extraction methods, this one-pot procedure achieves pulping of recalcitrant crustacean waste shells by employing ammonium acetate, ammonium formate and hydroxylammonium acetate as water-soluble, low-cost and easy to prepare ILs. An extensive parametric analysis of the pulping process has been carried out with different ILs, different ratios, temperature and time. The optimized protocol provides a high-quality chitin comparable, if not better, to commercial chitin. The best results were obtained at 150 °C with ammonium formate prepared in-situ from aqueous ammonia and formic acid: chitin was isolated in a 17 wt% yield (based on dried crab shells as starting biowaste), a degree of acetylation (DA) > 94 %, a crystallinity index of 39-46 %, a molecular weight up to 6.6 × 105 g/mol and a polydispersity of ca 2.0.

Apical cell expansion maintained by Dusky-like establishes a scaffold for corneal lens morphogenesis.

The Drosophila corneal lens is entirely composed of chitin and other apical extracellular matrix components, and it is not known how it acquires the biconvex shape that enables it to focus light onto the retina. We show here that the zona pellucida domain-containing protein Dusky-like is essential for normal corneal lens morphogenesis. Dusky-like transiently localizes to the expanded apical surfaces of the corneal lens-secreting cells and prevents them from undergoing apical constriction and apicobasal contraction. Dusky-like also controls the arrangement of two other zona pellucida domain proteins, Dumpy and Piopio, external to the developing corneal lens. Loss of either dusky-like or dumpy delays chitin accumulation and disrupts the outer surface of the corneal lens. We find that artificially inducing apical constriction by activating myosin contraction is sufficient to similarly alter chitin deposition and corneal lens morphology. These results demonstrate the importance of cell shape in controlling the morphogenesis of overlying apical extracellular matrix structures such as the corneal lens.

Hierarchical Chitin Nanocrystal-Based 3D Printed Dual-Layer Membranes Hydrogels: A Dual Drug Delivery Nano-Platform for Periodontal Tissue Regeneration.

Periodontitis, a prevalent chronic inflammatory disease caused by bacteria, poses a significant challenge to current treatments by merely slowing their progression. Herein, we propose an innovative solution in the form of hierarchical nanostructured 3D printed bilayer membranes that serve as dual-drug delivery nanoplatforms and provide scaffold function for the regeneration of periodontal tissue. Nanocomposite hydrogels were prepared by combining lipid nanoparticle-loaded grape seed extract and simvastatin, as well as chitin nanocrystals, which were then 3D printed into a bilayer membrane that possesses antimicrobial properties and multiscale porosity for periodontal tissue regeneration. The constructs exhibited excellent mechanical properties by adding chitin nanocrystals and provided a sustained release of distinct drugs over 24 days. We demonstrated that the bilayer membranes are cytocompatible and have the ability to induce bone-forming markers in human mesenchymal stem cells, while showing potent antibacterial activity against pathogens associated with periodontitis. In vivo studies further confirmed the efficacy of bilayer membranes in enhancing alveolar bone regeneration and reducing inflammation in a periodontal defect model. This approach suggests promising avenues for the development of implantable constructs that not only combat infections, but also promote the regeneration of periodontal tissue, providing valuable insights into advanced periodontitis treatment strategies.

Comparative efficiency of different polyol-based deep eutectic solvents for chitin extraction from lobster shells.

In this study, deep eutectic solvent (DES) prepared from choline chloride, lactic acid, and one of the four polyols (ethylene glycol, glycerol, xylitol, and sorbitol) were compared and assessed for their effectiveness in extracting chitin from lobster shells. Our results revealed that as the number of hydroxyl groups in polyols increased, the hydrogen bond network within the DESs became denser. However, this led to a corresponding increase in viscosity, which impacted the efficiency of chitin extraction. Among all prepared DESs, choline chloride-lactic acid/glycerol (CCLaGly) exhibited superior extractive ability, resulting in the extraction of pure chitin from lobster shells. The purity, crystallinity, and molecular weight of the extracted chitin using CCLaGly DES were comparable to those of chemically-isolated chitin, with purity reaching 94.76 ± 0.33 %, crystallinity at 78.78 %, and a molecular weight of 655 kDa. Additionally, the physicochemical properties of the DES-extracted chitins were characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. This study conducted a comparative analysis of polyol effects on chitin extraction from lobster shells, thereby opening a promising avenue for the utilization of various crustacean shells in sustainable biomaterial production.

Tenebrio Molitor breeding rejects as a high source of pure chitin and chitosan: Role of the processes, influence of the life cycle stages and comparison with Hermetia illucens.

This work valorizes rejects from Tenebrio Molitor TM breeding through the production of chitin and chitosan. Two processes are proposed for extracting chitin from larval exuviae and adult. The first process P1 provides chitin with high contents compared to literature data but the characterization shows the presence of impurities in the exuviae chitin responsible for the shifts in the values of the physicochemical characteristics towards those presented by γ chitin. These impurities are removed by delipidation and pure α chitin is obtained. The effective delipidation of this chitin would be linked to its fibrous surface structure. The analysis of the results of P1 led us to develop a second extraction process P2 which provides pure chitin with improved yields using delipidation followed by deproteinization. The N-deacetylation of chitin according to Kurita or Broussignac process makes possible the preparation of pure, highly deacetylated chitosan samples (2 % < DA < 12 %) with high yields and controlled molar masses (Mv). A kinetic study of molecular degradation during deacetylation is carried out. A comparison with Hermetia illucens allows to extend the use of insects as a potential source of chitin and chitosan and confirms the role of the source and the processes in the determination of their characteristics.

The preparation, modification and hepatoprotective activity of chitooligosaccharides: A review.

Chitooligosaccharides (COS) has attracted increasing attention due to the various promising bioactivities, tremendous potential in agricultural, environmental nutritional and functional food fields. COS as the major degradation product from chitosan or chitin is prepared via enzymatic, chemical and physical methods. Further obtained COS generally possesses different structural characteristics, such as molecular weight, degree of acetylation and degree of polymerization. Innovations into COS modification has also broadened application of COS in nutrition as well as in agricultural safety. Due to the affinity between structure and bioactivity, diversity of structural characteristics endows COS with various bioactivities like antitumor, antioxidant and anti-inflammatory effects, especially hepatoprotective activity. Therefore, the present review narrates the recent developments in COS physicochemical properties, while paying considerable attention to preparation strategies of COS and their advantages and disadvantages. Moreover, the modification of COS is also discussed including alkylation, quaternization and sulfation, herein the structure-activity relationship of COS was highlighted. Additionally, we summarize the latest research on hepatoprotective activity and mechanisms of COS. Eventually, the future directions of research on COS were discussed, which would provide a new appreciation for the future use of COS.

Recombinant expression and characterization of the endochitinase Chit36-TA from Trichoderma asperellum in Komagataella phaffii for chitin degradation of black soldier fly exuviae.

The natural polymer chitin is an abundant source for valuable N-acetylchitooligosaccharides and N-acetylglucosamine applicable in several industries. The endochitinase Chit36-TA from Trichoderma asperellum was recombinantly expressed in Komagataella phaffii for the enzymatic degradation of chitin from unused insect exuviae into N-acetylchitooligosaccharides. Chit36-TA was purified by Ni-NTA affinity chromatography and subsequently biochemically characterized. After deglycosylation, the endochitinase had a molecular weight of 36 kDa. The optimum pH for Chit36-TA was 4.5. The temperature maximum of Chit36-TA was determined to be 50 °C, while it maintained > 93% activity up to 60 °C. The chitinase was thermostable up to 45 °C and exhibited ~ 50% activity after a 15 min incubation at 57 °C. Chit36-TA had a maximum specific enzyme activity of 50 nkat/mg with a Km value of 289 µM with 4-methylumbelliferyl-N,N',N″-triacetyl-ß-chitotrioside as substrate. Most tested cations, organic solvents and reagents were well-tolerated by the endochitinase, except for SDS (1 mM), Cu2+ (10 mM) and Mn2+ (10 mM), which had stronger inhibitory effects with residual activities of 3, 41 and 28%, respectively. With a degree of hydrolysis of 32% applying colloidal shrimp chitin (1% (w/v)) and 12% on insect larvae (1% (w/v)) after 24 h, the endochitinase was found to be suitable for the conversion of colloidal chitin as well as chitin from black soldier fly larvae into water-soluble N-acetylchitooligosaccharides. To prove scalability, a bioreactor process was developed in which a 55-fold higher enzyme activity of 49 µkat/l and a tenfold higher protein expression of 1258 mg/l were achieved.