Determination of deferasirox in human plasma by short-end injection and sweeping with a field-amplified sample stacking and micellar electrokinetic chromatography.

A field-amplified sample stacking-sweeping micellar electrokinetic chromatography with short-end injection was established for determination of deferasirox (DFX) in plasma. DFX was extracted from plasma and reconstituted with deionized water (lower conductivity solution). Capillary (effective length, 10cm) was filled with background electrolyte (40mM phosphate buffer, pH 4.5, containing 20% methanol). After sample loading from outlet end at 5psi for 15s, separation was carried out by applying high voltage at 15kV for 10min. Sodium dodecyl sulfate (SDS) was used to sweep DFX for enhancing sensitivity. The optimal CE separation conditions were 40mM phosphate buffer at pH 4.5 containing 100mM SDS and 20% methanol. The analysis time was about 3.5min for DFX. The calibration curve of DFX was ranged from 1 to 20µg/ml. The linearity (r) was more than 0.998. RSD and RE in intra- and inter-day assays were all below 12.14%. The limit of detection (LOD, S/N=3) for DFX was 0.3µg/ml. The sensitivity enhancement factor between sweeping-FASS MEKC and capillary zone electrophoresis is 3.3. Finally, the method was applied for determination of DFX in ß-thalassemia patients.

Comparison of monolithic capillary electrochromatography and micellar electrokinetic chromatography for the separation of polycyclic aromatic hydrocarbons.

Atmospheric pollution of anthropic origin is recognized as a major risk factor for health, in particular for respiratory and cardio-vascular systems. Among these pollutants, polycyclic aromatic hydrocarbons (PAHs) are placed on the list of US Environmental Protection Agency (EPA) as 'priority' pollutants and four of them are assigned as potential carcinogens by The International Agency for Research on Cancer (IARC). In the present work two capillary techniques-micellar electrokinetic chromatography (MEKC) and monolithic capillary electrochromatography (CEC)-were compared for the separation of eleven PAHs. Both techniques compared in the present work are fully compatible with every standard apparatus of capillary electrophoresis. For MEKC, enhancement of selectivity and decrease of the separation window of eleven PAHs were obtained with methanol:borate 25 mM (20/80, v/v) running buffer containing 10 mM of hydroxypropylated γ-cyclodextrins with low SDS content (25 mM). In case of CEC, two acrylate-based monolithic stationary phases (MSPs) were evaluated for their application in the separation of eleven PAHs. The best MSP based on butyl acrylate was compared with MEKC in terms of sample capacity, PAHs elution order, LOQ, efficiency and effect of pH. Influence of the hydrophobicity of mobile phase on the PAHs elution order was also studied.

A validated micellar electrokinetic chromatography method for the quantitation of dexamethasone, ondansetron and aprepitant, antiemetic drugs, in organogel.

A micellar electrokinetic chromatography (MEKC) method was developed for the determination of three anti-vomiting drugs (aprepitant, dexamethasone and ondansetron) in pharmaceutical formulations. The method was optimized using a central composite design (CCD). Four main factors (borate buffer concentration, pH, methanol content and sodium dodecyl sulfate concentration) were optimized in order to obtain best resolutions and peak efficiencies in a minimum runtime. The separation was performed in a fused-silica capillary. After optimization, the background electrolyte consisted of a borate buffer (62.5mM, pH 8.75) containing sodium dodecyl sulfate (77.5mM) and methanol (3.75%). Under these conditions, a complete separation of each antiemetic drug and its respective internal standards was achieved in 38min. The method was validated with trueness values from 94.9 to 107.2% and precision results (repeatability and intermediate precision) lower than 5.9%. MEKC-UV was the first method allowing the separation of aprepitant, dexamethasone and ondansetron and was suitable for the quantitation of these three antiemetic drugs in organogel formulations. The rapid sample preparation coupled with an automated separation technique make this method convenient for quality control of extemporaneous magistral ready-to-use formulation.

Assessment of DNA damage by micellar electrokinetic chromatography.

A simple and inexpensive MEKC method, which is able to assess base damage within DNA samples, is illustrated. After heat-acid hydrolysis of the DNA samples, both the percentage of each canonical DNA base and the relative amount of uncanonical DNA bases can be measured. This method is useful for an evaluation of the integrity of PCR templates used in several fields of investigation.

Determination of lumiracoxib by a validated stability-indicating MEKC method and identification of its degradation products by LC-ESI-MS studies.

A stability-indicating MEKC method was developed and validated for the analysis of lumiracoxib (LMC) in pharmaceutical formulations using nimesulide as the internal standard (IS). Optimal conditions for the separation of LMC and degradation products were investigated. The method employed 50 mM borate buffer and 50 mM anionic detergent SDS solution at pH 9.0. MEKC method was performed on a fused-silica capillary (50 µm id; effective length, 40 cm) maintained at 30°C. The applied voltage was 20 kV and photodiode array (PDA) detector was set at 208 nm. The method was validated in accordance with the International Conference on Harmonisation requirements. The stability-indicating capability of the method was established by enforced degradation studies combined with peak purity assessment using PDA detection. The degradation products formed under stressed conditions were investigated by LC-ESI-MS and the two degraded products were identified. MEKC method was linear over the concentration range of 5-150 µg/mL (r(2) =0.9999) of LMC. The method was precise, accurate, with LOD and LOQ of 1.34 and 4.48 µg/mL, respectively. The robustness was proved by a fractional factorial design evaluation. The proposed MEKC method was successfully applied for the quantitative analysis of LMC in tablets to support the quality control.

Simultaneous determination of aliskiren and hydrochlorothiazide from their pharmaceutical preparations using a validated stability-indicating MEKC method.

A stability-indicating MEKC method was developed and validated for the simultaneous determination of aliskiren (ALI) and hydrochlorothiazide (HCTZ) in pharmaceutical formulations using ranitidine as an internal standard (IS). Optimal conditions for the separation of ALI, HCTZ and its major impurity chlorothiazide (CTZ), IS and degradation products were investigated. The method employed 47 mM Tris buffer and 47 mM anionic detergent SDS solution at pH 10.2 as the background electrolyte. MEKC method was performed on a fused-silica capillary (40 cm) at 28°C. Applied voltage was 26 kV (positive polarity) and photodiode array (PDA) detector was set at 217 nm. The method was validated in accordance with the ICH requirements. The method was linear over the concentration range of 5-100 and 60-1200 µg/mL for HCTZ and ALI, respectively (r(2) >0.9997). The stability-indicating capability of the method was established by enforced degradation studies combined with peak purity assessment using the PDA detection. Precision and accuracy evaluated by RSD were lower than 2%. The method proved to be robust by a fractional factorial design evaluation. The proposed MEKC method was successfully applied for the quantitative analysis of ALI and HCTZ both individually and in a combined dosage tablet formulation to support the quality control.

Sample stacking microemulsion electrokinetic capillary chromatography induced by reverse migrating pseudostationary phase for the quantification of phenobarbital and its p-hydroxyphenobarbital metabolite in rat urine.

For the first time, a capillary electrophoretic (CE) method with sample stacking induced by a reverse migrating pseudostationary phase (SRMP) technique has been developed and validated for sensitive determination of phenobarbital (PB) and its p-hydroxyphenobarbital (PHPB) metabolite in rat urine samples. Separation and determination were optimized on a fused-silica capillary with a total length of 50 cm (effective length 40 cm) and 75 µm ID. The microemulsion background electrolyte consisted of 0.8% (v/v) ethyl acetate, 6.6% (v/v) butan-2-ol, 1.0% (v/v) acetonitrile, 2.0% (w/v) sodium n-dodecyl sulfate (SDS), and 89.6% (v/v) of 7.5 mM ammonium formate at pH 8. When this preconcentration technique was used, the sample stacking and the separation processes took place successively with changing the voltage with an intermediate polarity switching step. For practical application, a solid-phase extraction (SPE), C(18) sorbent with n-hexane/ethyl acetate (1 : 1%, v/v) as the elution solvent was used for sample purification and concentration. The SPE method gave good extraction yields for all the analytes, with absolute recovery values of 96.9% and 99.1% for PB and PHPB, respectively. The regression equations for PB and PHPB showed excellent linearity over a concentration range of 55-1386 ng mL(-1) for PB and PHPB (r = 0.998). The developed microemulsion electrokinetic capillary chromatography (MEEKC) method for separation of the studied compounds with SRMP as the electrophoretic preconcentration technique allowed detection limits in urine samples at 16.8 ng mL(-1) for PB and PHPB which are 15-fold lower than the reported CE method in the literature. The precision results, expressed by the intra-day and inter-day relative standard deviation (RSD) values range from 3.6 to 7.1% (repeatability) and from 3.2 to 7.2% (intermediate precision) for PB and PHPB, respectively, which were in line with Food and Drug Administration (FDA) criteria.

Evaluation of a multiarray system for pharmaceutical analysis by microemulsion electrokinetic chromatography.

A multiplexed capillary electrophoresis (CE) system equipped with 96 channels was evaluated for high-throughput screening in drug discovery by microemulsion electrokinetic chromatography (MEEKC). Method transfer from a single channel to a multichannel CE system is described. Loss of efficiency and reduced migration times could be elucidated to the poor efficacy in Joule heat dissipation by forced air cooling in the multiarray system compared to liquid cooling in the single channel instrument. On the other hand, only 48 channels could actually be used because of the maximum total current of 3 mA. Precision data remained below 8% and 9% for migration times and peak areas, respectively. Some UV-detector cross-talk interference between neighboring capillary channels was noted. Impurities at 0.5% compared to the main peak (100%) could be detected with the multiplexed system which is 10 times lower compared to the single capillary system. Higher efficiency and improved figures of merit (absolute sensitivity and no cross-talk interferences) were obtained by using an array of only 24 capillaries.

Micellar electrokinetic chromatography method development for determination of impurities in ritonavir.

Ritonavir is a synthetic peptidomimetic human immunodeficiency virus (HIV) protease inhibitor employed in the treatment of AIDS since 1996. Synthetic precursors are potential impurities in the final product. In the present work a micellar electrokinetic chromatography (MEKC) method for the separation of Ritonavir from three available synthetic precursors was developed. The optimized separation is performed in a background electrolyte composed of sodium tetraborate (pH 9.6; 15mM) containing sodium dodecylsulfate (30mM) and acetonitrile (18%, v/v). Mass spectrometry was used to confirm the identity of the tested substances. Good repeatability was observed for migration time (RSD about 0.4%) and peak area (RSD about 0.8%). The limits of detection (LOD) obtained allow the determination of two of the impurities at levels as low as 0.005% m/m, and one at a level of 0.3% m/m.

Determination of voriconazole in human serum and plasma by micellar electrokinetic chromatography.

The micellar electrokinetic capillary chromatography (MEKC) separation and analysis of voriconazole and UK 115794 (internal standard) were examined and an assay for determination of voriconazole in human plasma and serum was developed. The MEKC medium comprises a 2:15 (v/v) mixture of methanol and a pH 9.3 buffer composed of 5mM Na(2)B(4)O(7), 7 mM Na(2)HPO(4) and 54 mM SDS. Sample preparation is based upon liquid/liquid extraction with ethylacetate and dichloromethane (75%/25%) at physiological pH. Using this approach with 250 microl serum or plasma and reconstitution of the dried extract into 100 microl of a buffer composed of 0.5mM Na(2)B(4)O(7) and 0.7 mM Na(2)HPO(4) (pH 9.3), the detection and quantitation limits were determined to be 0.1 and 0.2 microg/ml, respectively, a sensitivity that is suitable for therapeutic drug monitoring of voriconazole (provisional therapeutic range: 1-6 microg/ml) in human plasma and serum samples. The method was validated and compared to an HPLC method, showing excellent agreement between the two for a set of 91 samples that stemmed from patients being treated with voriconazole. The MEKC assay is also demonstrated to be suitable to explore pharmacokinetic data of voriconazole.

Silanizing agent for semipermanent wall coating in micellar electrokinetic capillary chromatography.

In this paper, the long-chained, silanizing agent chloro(dodecyl)dimethylsilane (CDDS) was investigated as a semipermanent coating in micellar electrokinetic capillary chromatography (MEKC). CDDS coating had great stability due to the formation of covalent bonding with the silanol groups on the surface of fused-silica capillary and remained stable for over 100 min after removal of the rinse step of CDDS solution. Anionic surfactant sodium dodecyl sulfate (SDS) could aggregate at this CDDS coating by the hydrophobic group and formed a SDS layer which could increase the electroosmotic flow (EOF). The separation was performed with the running buffer composed of 60mM sodium tetraborate, 12 mM SDS at pH 9.9, with the applied voltage of 20 kV and capillary temperature 25 degrees C. The effect of the coating agent was investigated by the analysis of amino acids. Compared with previous no-coating method, the EOF increases from 4.34 x 10(-4)cm(2)V(-1)s(-1) to 7.02 x 10(-4)cm(2)V(-1)s(-1). Migration time reproducibility was less than 0.97% R.S.D. from run to run and less than 1.56% R.S.D. from day to day.

Determination of tocopherols in vegetable oils by CEC using methacrylate ester-based monolithic columns.

The separation and determination of tocopherols (Ts) in vegetable oils by CEC using methacrylate ester-based monolithic columns has been developed. The effects of pore size of the monolithic columns were studied, and the composition of mobile phase was optimized. The optimal pore size of the monolith was obtained with 12 wt% 1,4-butanediol in the polymerization mixture. Excellent resolution between tocopherols was achieved within 10 min analysis time with a 99:1 v/v MeOH-aqueous buffer containing 5 mM tris(hydroxymethyl)aminomethane at pH 8.0. The LODs were lower than 2.3 microg/mL, and interday and column-to-column reproducibilities at 25 microg/mL were better than 5.6%. Using a 93:7 v/v MeOH-aqueous buffer, both tocopherols and tocotrienols (T(3)s) of grapeseed and palm oils were resolved. Application to the detection of olive oil adulteration with low-cost edible oils was demonstrated.

Determination of sulfonamides in milk after precolumn derivatisation by micellar liquid chromatography.

A simple method to identify and determine six sulfonamides (sodium sulfacetamide, sulfamethizole, sulfaguanidine, sulfamerazine, sulfathiazole and sulfamethoxazole) in milk by micellar liquid chromatography (MLC) is reported. The assay makes use of a precolumn diazotisation-coupling derivatisation including the formation of an azo dye that can be detected at 490 nm. Furthermore, the use of MLC as an analytical tool allows the direct injection of non-purified samples. The separation was performed with an 80 mM SDS-8.5% propanol eluent at pH 7. Analysis times are below 16 min with a complete resolution. Linearities (r>0.9999), as well as intra- and inter-day precision (below 2.7%), were studied in the validation of the method. The limits of detection and quantification ranged from approximately 0.72 to 0.94 and 2.4 to 3.1 ng mL(-1), respectively. The detection limit was below the maximum residue limit established by the European Community. Finally, recoveries in spiked milk samples were in the 83-103% range.

Micellar liquid chromatographic analysis of benzyl alcohol and benzaldehyde in injectable formulations.

An accurate, sensitive and selective reversed-phase micellar liquid chromatographic method was developed for simultaneous determination of benzyl alcohol and benzaldehyde. This method was applied in different injectable formulations containing diclofenac, piroxicam, lincomycin and clindamycin. The method showed excellent linearity in the range of 10-100 microg mL(-1) and 1-20 microg mL(-1) with the limit of detection (S/N = 3) 0.25 microg mL(-1) (2.3 x 10(-6) mol L(-1)) and 0.12 microg mL(-1) (1.13 x 10(-6) mol L(-1)) for benzyl alcohol and benzaldehyde, respectively. The suggested method was successfully applied to the analysis of the studied drugs in bulk with average recoveries of 100.1 +/- 1.0% for benzyl alcohol and 100.4 +/- 1.6% for benzaldehyde, and to the determination of benzyl alcohol and benzaldehyde in injectable formulations with the respective average recoveries of 99.8 +/- 0.3 and 100.0 +/- 0.4%.

Analysis of substances to be used as internal standards in MEKC.

The use of internal standards (ISs) improves the quantitative performance of CE. However, ISs chosen for use in CZE often cannot be used for micellar EKC (MEKC). Therefore 22 substances were investigated as potential ISs in MEKC. These substances were selected based upon a literature search. The substances were investigated using a method similar to the standard operating conditions for MEKC as recommended by S. Terabe. Furthermore, the migration time and the corrected migration time (k(S)) were determined for each substance to establish the migration position relative to other peaks in the electropherograms. A combination of eight substances, selected according to the obtained results (t(m) = 4 up to 12 min), was tested for practical benefit and applicability. The peak area precision was in the range of 0.8 and 1.2% (n = 60), and the peaks were well shaped for all the investigated substances. The selected substances covered a wide migration time window and therefore they can be regarded as suitable for future analysis at any required migration position.

Data processing in metabolic fingerprinting by CE-UV: application to urine samples from autistic children.

Metabolic fingerprinting of biofluids such as urine can be used to detect and analyse differences between individuals. However, before pattern recognition methods can be utilised for classification, preprocessing techniques for the denoising, baseline removal, normalisation and alignment of electropherograms must be applied. Here a MEKC method using diode array detection has been used for high-resolution separation of both charged and neutral metabolites. Novel and generic algorithms have been developed for use prior to multivariate data analysis. Alignment is achieved by combining the use of reference peaks with a method that uses information from multiple wavelengths to align electropherograms to a reference signal. This metabolic fingerprinting approach by MEKC has been applied for the first time to urine samples from autistic and control children in a nontargeted and unbiased search for markers for autism. Although no biomarkers for autism could be determined using MEKC data here, the general approach presented could also be applied to the processing of other data collected by CE with UV-Vis detection.

Determination of doxycycline in pharmaceuticals and human urine by micellar electrokinetic capillary chromatography.

Micellar electrokinetic capillary chromatography (MEKC) was performed at 25 degrees C and 30 kV (under a pressure of 15 mbar), using 30 mM borate buffer containing 60 mM sodium dodecysulfate (SDS) and 5% (v/v) methanol as background electrolyte (pH 9.0) to determine doxycycline. UV detection was at 350 nm. The method was shown to be specific, accurate (recovery was 100.3 +/- 1.0%), linear over the tested range (correlation coefficient 0.9995) and precise (RSD <1.9%). The method was used to determine doxycycline in tablets, capsules and human urine after oral application.

Analysis of different beta-lactams antibiotics in pharmaceutical preparations using micellar electrokinetic capillary chromatography.

The potential of micellar electrokinetic capillary chromatography (MEKC) for analyzing nine beta-lactams antibiotics (cloxacillin, dicloxacillin, oxacillin, penicillin G, penicillin V, ampicillin, nafcillin, piperacillin, amoxicillin) in different pharmaceutical preparations, have been demonstrated. An experimental design strategy has been applied to optimize the main variables: pH and buffer concentration, concentration of the micellar medium, separation voltage and capillary temperature. Borate buffer (26mM) at pH 8.5 containing 100mM sodium dodecyl sulphate (SDS) was used as the background electrolyte. The method was validated. Linearity, limit of detection and quantitation and precision were established for each compound. The analysis of some of the beta-lactams in Orbenin capsules, Britapen tables and in Veterin-Micipen injectable, all used in human and veterinary medicine, have demonstrated the applicability of these technique for quality control in the pharmaceutical industry.

Method for enantiomeric purity of a quinuclidine candidate drug by capillary electrophoresis.

A chiral procedure based on EKC was developed and validated for determination of the enantiomeric purity of PHA-543613, a drug candidate that was under development for treatment of the cognitive deficits of Alzheimer's disease and schizophrenia. Separation of enantiomers is accomplished via differential, enantiospecific complexation with a single-isomer, precisely sulfated beta-CD and heptakis-6-sulfato-beta-CD (HpS-beta-CD). Both neutral and sulfated CDs were screened before selecting HpS-beta-CD as the chiral selector. The separation is conducted in a 61 cm x 50 microm uncoated fused silica capillary with 25 mM HpS-beta-CD in pH 2.50, 25 mM lithium phosphate as the separation buffer with detection at 220 nm. Application of reverse polarity at -30 kV results in an elution time of about 12 min for PHA-543613 and 13 min for the undesired S-enantiomer. Quantification is versus an authentic reference S-enantiomer as an external standard in combination with an internal standard. The procedure was validated over the range 0.1-2.0% w/w. The detection limit is 0.01-0.02%. The amount of distomer intrinsic to the drug substance is about 0.1% or less. The developed method was used to generate stability data on multiple lots: in one case for up to 3 years.

Micellar electrokinetic capillary chromatographic method for the quantitative analysis of uricosuric and antigout drugs in pharmaceutical preparations.

A simple MEKC method is described for the separation and quantification of seven widely used uricosuric and antigout drugs, including allopurinol (AP), benzbromarone (BZB), colchicine (COL), orotic acid (OA), oxypurinol (OP), probenecid (PB), and sulfinpyrazone (SPZ). The drugs were separated in a BGE of borate buffer (45 mM; pH 9.00) with SDS (20 mM) as the micellar source and the separated drugs were directly monitored with a UV detector (214 nm). Several parameters affecting the separation and analysis of the drugs were studied. Based on the normalized peak-area ratios of the drugs to an internal standard versus the concentration of the drugs, the method is applicable to quantify BZB, COL, and SPZ (each 5-200 microM), AP, OA, OP, and PB (each 10-200 microM) with detection limits (S/N = 3, 0.5 psi, 5 s injection) in the range of 0.6-4.0 microM. The precision (RSD; n = 5) and accuracy (relative error; n = 5) of the method for intraday and interday analyses of the analytes at three levels (30, 120, and 180 microM) are below 4% (n = 3). The method was demonstrated to be suitable for the analysis of AP and COL in commercial tablets with speed and simplicity.