In-situ growth of MOF-derived Co3S4@MoS2 heterostructured electrocatalyst for the detection of furazolidone.

The over-exploitation of antibiotics in food and farming industries ruined the environmental and human health. Consequently, electrochemical sensors offer significant advantages in monitoring these compounds with high accuracy. Herein, MOF-derived hollow Co3S4@MoS2 (CS@MS) heterostructure has been prepared hydrothermally and applied to fabricate an electrochemical sensor to monitor nitrofuran class antibiotic drug. Various spectroscopic methodologies have been employed to elucidate the structural and morphological information. Our prepared electrocatalyst has better electrocatalytic performance than bare and other modified glassy carbon electrodes (GCE). Our CS@MS/GCE sensor exhibited a highly sensitive detection by offering a low limit of detection, good sensitivity, repeatability, reproducibility, and stability results. In addition, our sensor has shown a good selectivity towards the target analyte among other potential interferons. The practical reliability of the sensor was measured by analyzing various real-time environmental and biological samples and obtaining good recovery values. From the results, our fabricated CS@MS could be an active electrocatalyst material for an efficient electrochemical sensing application.

[Determination of 24 elements migration in Yixing clay pottery by inductively coupled plasma mass spectrometry].

OBJECTIVE: To establish an analytical method for determining the migration of 24 elements in Yixing clay pottery in 4% acetic acid simulated solution by inductively coupled plasma mass spectrometry. METHODS: Four types of Yixing clay pottery, including Yixing clay teapot, Yixing clay kettle, Yixing clay pot, and Yixing clay electric stew pot, were immersed in 4% acetic acid as a food simulant for testing. The migration amount of 24 elements in the migration solution was determined using inductively coupled plasma mass spectrometry. RESULTS: Lithium, magnesium, aluminum, iron, and barium elements with a mass concentration of 1000 µg/L; Lead, cadmium, total arsenic, chromium, nickel, copper, vanadium, manganese, antimony, tin, zinc, cobalt, molybdenum, silver, beryllium, thallium, titanium, and strontium elements within 100 µg/L there was a linear relationship within, the r value was between 0.998 739 and 0.999 989. Total mercury at 5.0 µg/L, there was a linear relationship within, the r value of 0.995 056. The detection limit of the elements measured by this method was between 0.5 and 45.0 µg/L, the recovery rate was 80.6%-108.9%, and the relative standard deviation was 1.0%-4.8%(n=6). A total of 32 samples of four types of Yixing clay pottery sold on the market, including teapots, boiling kettles, casseroles, and electric stewing pots, were tested. It was found that the migration of 16 elements, including beryllium, titanium, chromium, nickel, cobalt, zinc, silver, cadmium, antimony, total mercury, thallium, tin, copper, total arsenic, molybdenum, and lead, were lower than the quantitative limit. The element with the highest migration volume teapot was aluminum, magnesium, and barium; The kettle was aluminum and magnesium; Casserole was aluminum, magnesium, and lithium; The electric stew pot was aluminum. CONCLUSION: This method is easy to operate and has high accuracy, providing an effective and feasible detection method for the determination and evaluation of element migration in Yixing clay pottery.

Investigation on trommeled legacy waste from full-scale mining of old dumpsites: Suitable for valorization or scientific disposal?

The burgeoning interest in resource recovery from old dumpsites has significantly propelled the adoption of Landfill Mining (LFM) in recent years. This study is centred around evaluating the quality of materials recovered from the full-scale LFM activities at two major dumpsites in India, focusing on the valorization potential of the segregated legacy waste. A detailed analysis was conducted on the segregated waste fractions based on particle size (-30 mm, 30 to 6 mm, and -6 mm, as sourced from the sites), employing both batch and column leaching methods across a range of liquid-to-solid (L/S) ratios (0.1-10.0 L/kg). The findings reveal a pronounced concentration of contaminants within the -6 mm fraction compared to the 30 to 6 mm and -30 mm fractions. Column leaching tests revealed a reduction in contaminant concentration, correlating with incremental changes in L/S ratio. Notably, this trend remained consistent across varying particle sizes and specific type of contaminants assessed. Notably, color intensity of leachate reduced significantly from 720 to 1640 Platinum Cobalt Units (PCU) at an L/S ratio of 0.1 L/kg to a minimal 94-225 PCU at an L/S of 10 L/kg. Dissolved salts emerged as a primary concern, marking them as significant contaminants in both leaching methods. The analysis confirmed that the segregated fractions comply with the USEPA Waste Acceptance Criteria (WAC), permitting their disposal in non-hazardous waste landfills. However, the elevated presence of dissolved salts, exceeding reuse limits by 5-35 times, limits their open or unrestricted reuse. Despite this, isolated reuse aligns with regulations from the Netherlands and Germany, suggesting viable pathways for compliant utilization. Geotechnical assessments indicate the potential for repurposing the -30 mm fraction as alternative earthfill and construction material. While heavy metal leaching does not pose significant concerns, the prevalent unscientific disposal practices near urban settlements highlight potential human health risks. This investigation enriches the understanding of the physicochemical properties, leaching behaviour, and reuse potential of segregated legacy waste, offering crucial insights for civic authorities in determining appropriate reuse and disposal strategies for such materials.

A portable magnetic electrochemical sensor for highly efficient Pb(II) detection based on bimetal composites from Fe-on-Co-MOF.

The practical, sensitive, and real-time detection of heavy metal ions is an essential and difficult problem. This study presents the design of a unique magnetic electrochemical detection system that can achieve real-time field detection. To enhance the electrochemical performance of the sensor, Fe2O3@C-800, Co/CoO@/C-600, and CoFe2O4@C-600 magnetic composites were synthesized using three MOFs precursors by the solvothermal method. And the morphology structure and electrochemical properties of as-prepared magnetic composites were researched by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), specific surface area and porosity analyzer (BET) and differential pulse voltammetry (DPV). The results shown that these composites improve conductivity and stability while preserving the MOFs basic frame structure. Compared with the monometallic MOFs-derived composites, the synergistic effect of the bimetallic composite CoFe2O4@C-600 can significantly enhance the electrochemical performance of the sensor. The linear range for the detection of lead ions was 0.001-60 µM, and the detection limit was 0.0043 µM with a sensitivity of 22.22 µA µM·cm-2 by differential pulse voltammetry. The sensor has good selectivity, stability, reproducibility and can be used for actual sample testing.

Trace elements in the muscle and liver tissues of Garra shamal from the freshwater ecosystem of Oman: an exposure risk assessment.

Anthropogenic activities lead to environmental contamination with foreign substances such as heavy metals. This work was aimed to monitor trace elements (total arsenic (As), cadmium (Cd), chrome (Cr), cobalt (Co), copper (Cu), lead (Pb), manganese (Mn), mercury (Hg), nickel (Ni), and zinc (Zn)) contamination levels (dry weight base) in three natural freshwater reservoirs of Oman including Al Khawd and Al Amarat (Muscat Governorate) and Surur area (Ad Dakhiliyah Governorate as control area) using a native benthic inland fish (Garra shamal; Cyprinidae) for the first time. The muscle and liver of a hundred and twenty G. shamal were collected to assess the degree of metal contamination. Atomic absorption spectrometry was used as an analytical technique. From the spectrum of analyzed elements, we found Zn as a major element in monitored areas. The statistically significant (P < 0.05) highest concentrations of Zn liver (0.275 ± 0.065 µg/g) were in Al Amarat compared to the other areas. The concentrations of monitored elements in the fish muscle were lower than the liver samples. Furthermore, the fish length was significantly correlated with the accumulation of Hg and Co in both muscle and liver samples. In all analyzed fish from Oman inland water, the concentrations of elements were below the permissible limits; however, additional research is needed.

Trends in occupational and work-related contact dermatitis attributed to nickel, chromium and cobalt in the UK: findings from The Health and Occupation Research network 1996-2019.

BACKGROUND: Occupational exposure to metals such as nickel, chromium and cobalt can be associated with contact dermatitis, which can adversely affect an individual's health, finances and employment. Despite this, little is known about the incidence of metal-related occupational contact dermatitis over prolonged periods of time. OBJECTIVES: To investigate the medically reported trends in the incidence of work-related contact dermatitis attributed to nickel, chromium and cobalt in the UK. METHODS: Incidence and trends in cases of occupational contact dermatitis caused by nickel, chromium or cobalt between 1996 and 2019 (inclusive), reported to the EPIDERM surveillance scheme, were investigated and compared with trends in the incidence of occupational contact dermatitis attributed to agents other than the aforementioned metals. A sensitivity analysis restricting the study cohort to cases attributed to only one type of metal was also conducted. RESULTS: Of all cases reported to EPIDERM during the study period, 2374 (12%) were attributed to nickel, chromium or cobalt. Cases predominantly comprised females (59%), with a mean (SD) age (males and females) of 38 (13) years. Cases were most frequently reported in manufacturing, construction, and human health and social activity industries. The most frequently reported occupations were hairdressing, and sales and retail (assistants, cashiers and checkout operators). The highest annual incidence rate of contact dermatitis was observed in females (2.60 per 100 000 persons employed per year), with the first and second peak seen in those aged 16-24 and ≥ 65 years, respectively. A statistically significant decrease in the incidence of occupational contact dermatitis attributed to metals over the study period was observed for all occupations (annual average change -6.9%, 95% confidence interval -7.8 to -5.9), with much of the decrease occurring between 1996 and 2007. Similar findings were obtained in the sensitivity analyses. CONCLUSIONS: Over a period of 24 years, there has been a statistically significant decline in the incidence of metal-related occupational contact dermatitis in the UK. This could be attributed not only to improvements in working conditions, which have reduced metal exposure, but could also be due to the closure of industries in the UK that might have generated cases of contact dermatitis owing to metal exposure.

Efficiency evaluation of Falcaria vulgaris biomass in Co(II) uptake from aquatic environments: characteristics, kinetics and optimization of operational variables.

In the present research, the seeds of Falcaria vulgaris were extracted from the investigated environment and used for crop cultivation. This study has focused on the efficiency evaluation of Falcaria vulgaris biomass (FVB) in cobalt ions removal from aqueous solutions. The biosorbent was characterized using FTIR, BET, EDAX-EDS, and SEM. The optimal conditions were determined by the response surface methodology (RSM) based on a Box-Behnken design (BBD) model. The BBD model had  R2,  Radj2 and  Rpred2 values of 0.9919, 0.9774, and 0.8929, respectively. The cobalt removal under different conditions of the BBD model varied from 36.14% to 82.11%. Based on the numerical optimization of the quadratic model, the maximum cobalt removal at a biosorbent-to-metal ratio of 10:1, pH = 4.88 and contact time of 70 min was calculated at 80.941%. The high accuracy of the model in predicting the optimal conditions for cobalt adsorption by FVB was confirmed using statistical analysis and validation tests. The adsorption process of FVB also follows a pseudo-second-order kinetic model, which suggests that the rate-controlling step in cobalt removal is the chemical interaction between functional groups in FVB and Co+2 ions. This study shows that FVB, a low-cost biosorbent, can be a suitable candidate for removing heavy metals such as cobalt from aqueous solutions.

In this research, the FVB biosorbent was prepared after seed extraction and planting of Falcaria vulgaris and then characterized and applied to cobalt adsorption. In addition, the operating parameters that affect metal adsorption were optimized using the RSM based on a BBD model. The FVB, in optimized conditions, as an efficient biosorbent, considerably has the potential for the adsorptive removal of metal ions from aquatic environments.

Evaluation of Trace Elements in Coffee and Mixed Coffee Samples Using ICP-OES Method.

This research examines the concentration of 10 trace elements including arsenic (As), lead (Pb), chromium (Cr), zinc (Zn), iron (Fe), cobalt (Co), cadmium (Cd), nickel (Ni), manganese (Mn), and aluminum (Al) from among 36 different samples of coffee (3 brands and 2 types of simple and instant) and mixed coffee (3 brands and 4 types of simple, creamy, chocolate and sugar free) collected from market of Iran's and analyzed by using ICP-OES (inductively coupled plasma-optical emission spectrometry). The recovery, limit of quantification (LOQ), and limit of detection (LOD) ranged from 93.4 to 103.1%, 0.06 to 7.22, and 0.018 to 2.166 µg/kg, respectively. The findings showed that the highest and lowest average concentrations were 498.72 ± 23.07 µg/kg (Fe) and 3.01 ± 1.30 µg/kg (As) in coffee and mixed coffee samples. Also, in all samples, the maximum concentration of trace elements was related to Fe (1353.61 µg/kg) and the minimum concentration was related to Al, As, Co, Cr, Ni, Pb, and Zn that were not detected (ND). The samples of mixed coffee had highest levels of trace elements compared to coffee samples. In coffee samples, type of instant coffee had highest levels of trace elements compared to simple coffee and mixed coffee samples. The type of creamy mixed coffee had highest levels of trace elements (except Ni and Cr) compared to other type of mixed coffee samples. Finally, trace elements were less than the standard levels of Iran and other countries (in all samples); therefore, it does not threaten Iranian consumers.

Associations between metal(loid) exposure with overweight and obesity and abdominal obesity in the general population: A cross-sectional study in China.

Previous studies have revealed links between metal(loid)s and health problems; however, the link between metal(loid)s and obesity remains controversial. We evaluated the cross-sectional association between metal(loid) exposure in whole blood and obesity among the general population. Vanadium (V), chromium (Cr), manganese (Mn), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), selenium (Se), molybdenum (Mo), cadmium (Cd), antimony (Sb), thallium (T1), and lead (Pb) were measured in 3029 subjects in Guangdong Province (China) using ICP-MS. The prevalence of overweight and obesity (OWO) and abdominal obesity (AOB) was calculated according to body mass index (BMI) and waist circumference (WC), respectively. Multivariate analysis showed that elevated blood Cu, Cd, and Pb levels were inversely associated with the risk of OWO, and these associations were confirmed by a linear dose-response relationship. Elevated blood Co concentration was associated with a decreased risk of AOB. A quantile g-computation approach showed a significantly negative mixture-effect of 13 metal(loid)s on OWO (OR: 0.96; 95% CI: 0.92, 0.99). Two metals-Ni and Mo-were inversely associated with the risk of OWO but positively associated with AOB. We cross-grouped the two obesity measurement types and found that the extremes of metal content were present in people with AOB only. In conclusion, blood Cu, Mo, Ni, Cd, and Pb were inversely associated with the risk of OWO. The presence of blood Co may be protective, while Ni and Mo exposure might increase the risk of AOB. The association between metal(loid) exposure and obesity warrants further investigation in longitudinal cohort studies.

Pyrogallol-based dipodal optical probe as new smart analytical tool for sustainable detection of cobalt in biosystem.

The present research focuses on the micro-level detection of cobalt ions in biological and environmental samples using a new probe. The probe is a multifunctional symmetrical dipodal molecule with two pyrogallol binding units attached to the malonate scaffold through a propylene spacer. It was synthesized and characterized by 1H NMR, 13C NMR, IR, electronic spectroscopy, and mass spectrometry. The molecule's binding, thermodynamic, and photophysical properties are also described. The designed probe demonstrates an excellent sensing ability for Co(II) based on the ESIPT "OFF-ON" fluorescence mechanism. The experiments explore the high selectivity of the ligand for cobalt sensing over a wide range of metal ions of biological and environmental importance. The fluorescence intensity shows a linear response to Co(II) in 5-100 µM concentration with a detection limit of 8.75 x 10-5 and a 2.65-fold enhancement in the intensity. These results establish its potential application as a fluorescence sensor. The probe is also employed as a colorimetric sensor for the qualitative determination of cobalt ions in DMSO solution. The interesting behavior of the probe motivated us further to study its coordination properties with divalent cobalt in solution. The pre-organized assembly with an appropriate cavity size favors the ligand for an efficient Co(II) encapsulation by coordinating through imine-Ns and aromatic ring-Os donors, giving high formation constants.

Individual, sociodemographic, and lifestyle influence on blood chromium, cobalt, and nickel levels in healthy population living in Belgrade, Serbia.

The rapid trend of industrialization and urbanization can lead to greater exposure of the general population to chromium, cobalt, and nickel. Their total body burden from all routes of recent exposure, as well as interindividual variability in exposure levels, metabolism, and excretion rates, are reflected in the blood metal concentrations. The main goals in this study were as follows: observing the reference levels of chromium, cobalt, and nickel in the blood of the population living in Belgrade, identification of individual and sociodemographic factors that most affect their blood levels, and comprehension of recent exposure to chromium, cobalt, and nickel. Blood was sampled from 984 participants, voluntary blood donors, who agreed to participate in this study. Individual and sociodemographic data were collected using questionnaire adapted for different subpopulations. Blood metal analyses were measured using ICP-MS method (7700×, Agilent, USA). Our study provided reference values of chromium, cobalt, and nickel in blood for adult population (18-65 years) and confirmed that blood cobalt and nickel levels were mostly influenced by age and gender, and age, respectively. Furthermore, weight status affected blood chromium and cobalt levels, while national origin affected blood chromium levels. The present study highlighted the importance of human biomonitoring studies to monitor exposure status and identify subpopulations with increased exposure to chromium, cobalt, and nickel.

Trace elements status in human breast milk of mothers from Île-de-France region.

Breastfeeding is the main source of nutrition during first months of life. Its composition varies according to parameters like mother's diet and health, living area, number of pregnancies and lactation duration… Trace-elements concentration in breastmilk is then an important parameter that can affect infant's health, growth or immune system and organ functions. Few data are available on this topic, and results are often very variable. The aim of this work is to determine reference values of Copper (Cu), Zinc (Zn), Selenium (Se), Cobalt (Co), Iron (Fe) and Iodine (I) in human breastmilk according to lactation duration and to study influencing parameters on its elementary composition. Regional Human Milk Bank of Necker Enfants Malades Hospital provided samples that came from breastfeeding woman involved in voluntary milk donation and epidemiologic data. Two hundred thirty-two breastmilk were analysed. After nitric acid mineralization of milk samples, Cu, Zn, Se, Co and I were determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) in a standard mode. Fe was measured by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Both assays were validated in terms of sensitivity, repeatability and accuracy.Studied breast milks came from mothers with an average age of 32 years and donation time ranged from one day after childbirth to 974 days (> 2.5 years); mean lactation duration is 59 days (> 8 weeks) while median duration is 29 days (around 4 weeks). In all studied samples, mean results and reference values are for Cu: 6.02 (1.71-13.23), Zn: 43.86 (7.3-107.0), Se: 0.12 (0.07-0.24), I: 0.29 (0.07-1.01) and Fe: 4.72 (1.25-11.49) µmol/L and for Co: 12.28 (5.27-25.82) nmol/L. Important number of studied milks allowed their distribution into seven classes of lactation durations. Samples were divided into four successive classes of fifteen days after childbirth, two other classes corresponding to the 3rd and 4th months and a last class for milks sampled after 4 months of lactation. Results were analysed in each class allowing study of evolution during lactation. That was particularly interesting for Zn, that presented an important variability in the total population (4-132 µmol/L) explained by variation along lactation evolution decreasing from 48 to 17 µmol/L in first and last duration classes respectively. In addition, Cu and Fe concentrations were also significantly correlated with lactation duration while Se and I were in a lesser extent (p = 0.002). In this study, we present reference values for studied trace elements at different lactation stages, allowing a fine interpretation of future breast milk samples results according to their sampling time. By continuing this study, we plan to increase number of samples in some of the classes and to study the influence of premature birth or twin pregnancy on breast milk elementary composition.

Microbial impact to environmental toxicants Ni(II) and Co(II): Joint toxicity and cellular response in Paramecium.

Cobalt (Co) and Nickel (Ni) are increasingly found in our environment. We analysed their combined toxicity and uptake mechanisms in the early food chain by studying bacteria and the bacterivorous ciliate Paramecium as a primary consumer. We exposed both species to these metals to measure the toxicity, uptake and transfer of metals from bacteria to Paramecium. We found that Ni is more toxic than Co, and that toxicity increases for both metals when (i) food bacteria are absent and (ii) both metals are applied in combination. The cellular content in bacteria after exposure shows a concentration dependent bias for either Ni or Co. Comparing single treatment and joint exposure, bacteria show increased levels of both metals when these are both exposed. To imitate the basic level of the food chain, we fed these bacteria to paramecia. The cellular content shows a similar ratio of Nickel and Cobalt as in food bacteria. This is different to the direct application of both metals to paramecia, where Cobalt is enriched over Nickel. This indicates that bacteria can selectively pre-accumulate metals for introduction into the food chain. We also analysed the transcriptomic response of Paramecium to sublethal doses of Nickel and Cobalt to gain insight into their toxicity mechanisms. Gene ontology (GO) analysis indicates common deregulated pathways, such as ammonium transmembrane transport and ubiquitine-associated protein degradation. Many redox-related genes also show deregulation of gene expression, indicating cellular adaptation to increased RONS stress. This suggests that both metals may also target the same cellular pathways and this is consistent with the increased toxicity of both metals when used together. Our data reveal complex ecotoxicological pathways for these metals and highlights the different parameters for their fate in the ecosystem, in the food chain and their ecotoxicological risk after environmental contamination.

Transplacental transfer of cobalt: Evidence from a study of mothers and their neonates in the African Copperbelt.

BACKGROUND: Transfer of the trace metal cobalt (Co) from mother to foetus has not been documented in populations with high environmental exposure to Co, as is the case in the African Copperbelt mining region. We analysed data obtained from 246 mother-infant pairs included (at delivery) in a previously published case-control study on birth defects, done in Lubumbashi (Democratic Republic of Congo) between March 1, 2013, and Feb 28, 2015. METHODS: Co was measured by Inductively Coupled Plasma Mass Spectrometry in maternal blood, maternal urine, umbilical cord blood and placental tissue, as available. RESULTS: The Co concentrations [geometric mean (GM) with interquartile range (IQR)] in maternal blood (GM 1.77 µg/L, IQR 1.07-2.93) and urine (GM 7.42 µg/g creatinine, IQR 4.41-11.0) were highly correlated (Spearman r = 0.71, n = 166; p < 0.001) and considerably higher than reference values determined for general populations elsewhere in the world. The concentrations of Co in umbilical cord blood (GM 2.41 µg/L) were higher (Wilcoxon test, p < 0.001) than in maternal blood (GM 1.37 µg/L), with a correlation between both values (Spearman r = 0.34; n = 127, p < 0.001). Co concentrations in placental tissue (geometric mean 0.02 µg/g wet weight) correlated with concentrations in maternal blood (Spearman r = 0.50, n = 86, p < 0.001) and in neonatal blood (Spearman r = 0.23, n = 83, p = 0.039). CONCLUSION: This first study of maternal and neonatal Co concentrations in the African Copperbelt provides strong evidence of a high transfer of Co from mother to foetus.

Metal(loid) Analysis of Commercial Rice from Malaysia using ICP-MS: Potential Health Risk Evaluation.

Rice is a predominant staple food in many countries. It is a great source of energy but can also accumulate toxic and trace metal(loid)s from the environment and pose serious health hazards to consumers if overdosed. This study aims to determine the concentration of toxic metal(loid)s [arsenic (As), cadmium (Cd), nickel (Ni)] and essential metal(loid)s [iron (Fe), selenium (Se), copper (Cu), chromium (Cr), cobalt (Co)] in various types of commercially available rice (basmati, glutinous, brown, local whites, and fragrant rice) in Malaysia, and to assess the potential human health risk. Rice samples were digested following the USEPA 3050B acid digestion method and the concentrations of metal(loid)s were analyzed using an inductively coupled plasma mass spectrometry (ICP-MS). Mean concentrations (mg/kg as dry weight) of metal(loid)s (n=45) across all rice types were found in the order of Fe (41.37)>Cu (6.51)>Cr (1.91)>Ni (0.38)>As (0.35)>Se (0.07)>Cd (0.03)>Co (0.02). Thirty-three percent and none of the rice samples surpassed, respectively, the FAO/WHO recommended limits of As and Cd. This study revealed that rice could be a primary exposure pathway to toxic metal(loid)s, leading to either noncarcinogenic or carcinogenic health problems. The non-carcinogenic health risk was mainly associated with As which contributed 63% to the hazard index followed by Cr (34%), Cd (2%), and Ni (1%). The carcinogenic risk to adults was high (>10-4) for As, Cr, Cd, and Ni. The cancer risk (CR) for each element was 5 to 8 times higher than the upper limit of cancer risk for an environmental carcinogen (<10-4). The findings from this study could provide the metal(loid)s pollution status of various types of rice which are beneficial to relevant authorities in addressing food safety and security-related issues.

Effect of feed trace elements on eggs of five strains of laying hens and their health risk assessment.

BACKGROUND: Trace elements are essential for human nutrition, and their deficiencies or excesses are strongly associated with several diseases, such as cardiovascular ones. OBJECTIVES: The current cross-sectional study investigated the concentration of essential trace elements (copper, non-metal selenium, iron, zinc, cobalt and manganese) in eggs and diets of five strains of laying hens. METHODS: The yolk and albumen were analysed separately, and wet preparation was carried out following inductively coupled plasma-optical emission spectrometry detection. The target hazard quotients (THQs) for the non-carcinogenic disease were calculated by the United States environmental protection agency (USEPA) method. RESULTS: The highest concentrations of selenium, zinc and manganese were found in egg yolks of native hens (0.76, 44.22 and 6.52 mg/kg, respectively). The highest amounts of copper and cobalt were recorded in the egg yolk of Lohman (2.07 and 0.023 mg/kg, respectively). On the other hand, the egg yolk of Bovans contained the highest amount of iron (57.46 mg/kg). CONCLUSION: Overall, the potential health risks were minimal, and the consumption of eggs was generally safe.

[Determination of cobalt and tungsten in human urine by inductively coupled plasma mass spectrometry].

Objective: To establish a inductively coupled plasma mass spectrometry method for the determination of trace cobalt and tungsten in human urine. Methods: The authors used 1% nitric acid solution as diluent in October-December 2021, the sample dilution factor and internal standard element were optimized by single factor rotation experiment, and the difference between the working curve and the standard curve was compared. Results: The method uses working curve to determine cobalt and tungsten in urine, the linear range of this method was 0.0~10.0 µg/L, the correlation coefficient was 0.999 9, the detection limits respectively were 0.005 µg/L (cobalt) and 0.09 µg/L (tungsten), the recoveries of samples respectively were 87.0%~100.2% (cobalt) and 89.4%~104.8% (tungsten), the relative standard deviations respectively were 0.4%~4.4% (cobalt) and 0.6%~3.8% (tungsten) . Conclusion: A simple and rapid method for determination of cobalt and tungsten in urine has been established. This method has the advantages of simple operation, high sensitivity, low detection limit and good stability. It is suitable for determination of cobalt and tungsten in urine of all kinds of people.

The association between multi-heavy metals exposure and lung function in a typical rural population of Northwest China.

BACKGROUND: Heavy metal exposure is acknowledged to be associated with decrease of lung function, but the relationship between metals co-exposure and lung function in rural areas of Northwest China remains unclear, particularly in an area famous for heavy metal pollution and solid fuel use. Therefore, the purpose of this study is to explore the effects of heavy metal exposure on lung function and the potential impacts of living habit in a rural cohort of Northwest China. METHODS: The study area included five villages of two regions in Northwestern China-Gansu province. All participants were recruited from the Dongdagou-Xinglong (DDG-XL) rural cohort in the study area. Urine levels of 10 common and representative heavy metals were detected by ICP-MS, including Cobalt (Co), Nickel (Ni), Molybdenum (Mo), Cadmium (Cd), Stibium (Sb), Copper (Cu), Zinc (Zn), Mercury (Hg), Lead (Pb), and Manganese (Mn). The lung function was detected by measuring percentages of predicted forced vital capacity (FVC%) and predicted forced expiratory volume in one second (FEV1%) as well as the ratio of FEV1/FVC. We also analyzed the association between heavy metals and pulmonary ventilation dysfunction (PVD). Restricted cubic spline, logistic regression, linear regression, and bayesian kernel machine regression (BKMR) model were used to analyze the relationship between heavy metal exposure and lung function. RESULTS: Finally, a total of 382 participants were included in this study with an average age of 56.69 ± 7.32 years, and 82.46% of them used solid fuels for heating and cooking. Single metal exposure analysis showed that the higher concentration of Hg, Mn, Sb, and lower Mo may be risk factors for PVD. We also found that FEV1% and FVC% were negatively correlated with Sb, Hg, and Mn, but positively correlated with Mo. The effect of mixed heavy metals exposure could be observed through BKMR model, through which we found the lung function decreased with the increase of heavy metal concentration. Furthermore, the males, BMI ≥ 24 kg/m2 and who used solid fuels showed a higher risk of PVD when exposed to Co, Zn, and Hg. CONCLUSIONS: Our results suggested that heavy metal exposure was associated with decrease of lung function regardless of single exposure or mixed exposure, particularly for Sb, Hg, Mn and those who use solid fuels.

Comparison of Plasma Trace Elements Between 2 Captive Humboldt Penguin (Spheniscus humboldti) Populations.

Environmental pollutants and their effect on wildlife health play an important role in the conservation of endangered species and can be clinically relevant in captive animals too. Data on relevant concentrations of trace elements in captive birds with no known exposures are rare. For this study, silver, arsenic, gold, barium, cadmium, cobalt, chromium, copper, iron, mercury, magnesium, manganese, molybdenum, thallium, selenium, and zinc were measured by inductively coupled plasma mass spectrometry in lithium heparinized plasma samples from 18 Humboldt penguins at 2 zoological collections in Germany. The results showed that the plasma concentrations of silver, arsenic, gold, cadmium, cobalt, chromium, mercury, and selenium differed significantly (P ≤ 0.05) between the 2 penguin collections. The results indicate that the location of the birds has a strong influence on the plasma trace element concentrations. Well water used in the enclosures was suspected to be associated with these significant differences. Trace elemental concentrations in feed (eg, marine fish) and contamination from enclosure construction materials may also play a role. This study could provide a basis for further comparative, biomonitoring, toxicity, and reference interval studies.