Preparation and characterization of a novel humanized collagen III with repeated fragments of Gly300-Asp329.

Recombinant human collagens have attracted intensive interest in the past two decades, demonstrating considerable potential in medicine, tissue engineering, and cosmetics. Several humanized recombinant collagens have been produced, exhibiting similar characteristics as the native species. To get insight into the structural and bioactive properties of different parts of collagen, in this study, the segment of Gly300-Asp329 of type III collagen was first adopted and repeated 18 times to prepare a novel recombinant collagen (named rhCLA). RhCLA was successfully expressed in E. coli, and a convenient separation procedure was established through reasonably combining alkaline precipitation and acid precipitation, yielding crude rhCLA with a purity exceeding 90%. Additionally, a polishing purification step utilizing cation exchange chromatography was developed, achieving rhCLA purity surpassing 98% and an overall recovery of approximately 120 mg/L culture. Simultaneously, the contents of endotoxin, nucleic acids, and host proteins were reduced to extremely low levels. This fragmented type III collagen displayed a triple-helical structure and gel-forming capability at low temperatures. Distinct fibrous morphology was also observed through TEM analysis. In cell experiments, rhCLA exhibited excellent biocompatibility and cell adhesion properties. These results provide valuable insights for functional studies of type III collagen and a reference approach for the large-scale production of recombinant collagens.

Effect and mechanism of signal peptide and maltose on recombinant type III collagen production in Pichia pastoris.

Recombinant type III collagen plays an important role in cosmetics, wound healing, and tissue engineering. Thus, increasing its production is necessary. After an initial increase in output by modifying the signal peptide, we showed that adding 1% maltose directly to the medium increased the yield and reduced the degradation of recombinant type III collagen. We initially verified that Pichia pastoris GS115 can metabolize and utilize maltose. Interestingly, maltose metabolism-associated proteins in Pichia pastoris GS115 have not yet been identified. RNA sequencing and transmission electron microscopy were performed to clarify the specific mechanism of maltose influence. The results showed that maltose significantly improved the metabolism of methanol, thiamine, riboflavin, arginine, and proline. After adding maltose, the cell microstructures tended more toward the normal. Adding maltose also contributed to yeast homeostasis and methanol tolerance. Finally, adding maltose resulted in the downregulation of aspartic protease YPS1 and a decrease in yeast mortality, thereby slowing down recombinant type III collagen degradation. KEY POINTS: • Co-feeding of maltose improves recombinant type III collagen production. • Maltose incorporation enhances methanol metabolism and antioxidant capacity. • Maltose addition contributes to Pichia pastoris GS115 homeostasis.

Patient-derived extracellular matrix demonstrates role of COL3A1 in blood vessel mechanics.

Vascular Ehlers-Danlos Syndrome (vEDS) is a rare autosomal dominant disease caused by mutations in the COL3A1 gene, which renders patients susceptible to aneurysm and arterial dissection and rupture. To determine the role of COL3A1 variants in the biochemical and biophysical properties of human arterial ECM, we developed a method for synthesizing ECM directly from vEDS donor fibroblasts. We found that the protein content of the ECM generated from vEDS donor fibroblasts differed significantly from ECM from healthy donors, including upregulation of collagen subtypes and other proteins related to ECM structural integrity. We further found that ECM generated from a donor with a glycine substitution mutation was characterized by increased glycosaminoglycan content and unique viscoelastic mechanical properties, including increased time constant for stress relaxation, resulting in a decrease in migratory speed of human aortic endothelial cells when seeded on the ECM. Collectively, these results demonstrate that vEDS patient-derived fibroblasts harboring COL3A1 mutations synthesize ECM that differs in composition, structure, and mechanical properties from healthy donors. These results further suggest that ECM mechanical properties could serve as a prognostic indicator for patients with vEDS, and the insights provided by the approach demonstrate the broader utility of cell-derived ECM in disease modeling. STATEMENT OF SIGNIFICANCE: The role of collagen III ECM mechanics remains unclear, despite reported roles in diseases including fibrosis and cancer. Here, we generate fibrous, collagen-rich ECM from primary donor cells from patients with vascular Ehlers-Danlos syndrome (vEDS), a disease caused by mutations in the gene that encodes collagen III. We observe that ECM grown from vEDS patients is characterized by unique mechanical signatures, including altered viscoelastic properties. By quantifying the structural, biochemical, and mechanical properties of patient-derived ECM, we identify potential drug targets for vEDS, while defining a role for collagen III in ECM mechanics more broadly. Furthermore, the structure/function relationships of collagen III in ECM assembly and mechanics will inform the design of substrates for tissue engineering and regenerative medicine.

Microenvironment-responsive multifunctional hydrogels with spatiotemporal sequential release of tailored recombinant human collagen type III for the rapid repair of infected chronic diabetic wounds.

Recently, the incidence of chronic diabetic wounds increases continuously, and the existing clinical treatment is less effective. Thus, it is an urgent need to solve these problems for better clinical treatment effects. Herein, we prepared a brand-new tailored recombinant human collagen type III (rhCol III) and constructed a multifunctional microenvironment-responsive hydrogel carrier based on multifunctional antibacterial nanoparticles (PDA@Ag NPs) and our tailored rhCol III. The multifunctional smart hydrogel disintegrated quickly at the chronic diabetic wound sites and achieved the programed on-demand release of different therapeutic substances. The first released PDA@Ag NPs showed great antibacterial properties against S. aureus and E. coli. They could kill bacteria rapidly, and also showed antioxidant and anti-inflammatory effects at the wound site. The subsequent release of our tailored rhCol III could promote the proliferation and migration of mouse fibroblasts and endothelial cells during the proliferation and remodeling process of wound healing. Relevant results showed that the multifunctional smart hydrogel could promote the expression levels of basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF), decrease the inflammatory response, accelerate the deposition of collagen and increase cell proliferation and angiogenesis, thereby speeding up the healing of infected chronic wounds. In a word, the hydrogel, which took into consideration the complex microenvironment at the wound site and multi-stage healing process, could achieve programmed and responsive release of different therapeutic substances to meet the treatment needs in different wound healing stages. More importantly, our work illustrated the great application potential of our brand-new rhCol III in promoting chronic wound repair and regeneration.

Second harmonic generation light quantifies the ratio of type III to total (I + III) collagen in a bundle of collagen fiber.

The ratio of type III to type I collagen is important for properly maintaining functions of organs and cells. We propose a method to quantify the ratio of type III to total (type I + III) collagen (λIII) in a given collagen fiber bundle using second harmonic generation (SHG) light. First, the relationship between SHG light intensity and the λIII of collagen gels was examined, and the slope (k1) and SHG light intensity at 0% type III collagen (k2) were determined. Second, the SHG light intensity of a 100% type I collagen fiber bundle and its diameter (D) were measured, and the slope (k3) of the relationship was determined. The λIII in a collagen fiber bundle was estimated from these constants (k1-3) and SHG light intensity. We applied this method to collagen fiber bundles isolated from the media and adventitia of porcine thoracic aortas, and obtained λIII = 84.7% ± 13.8% and λIII = 17.5% ± 15.2%, respectively. These values concurred with those obtained with a typical quantification method using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The findings demonstrated that the method proposed is useful to quantify the ratio of type III to total collagen in a collagen fiber bundle.

Mesenchymal Stromal Cells Derived Conditioned Medium in Pulmonary Fibrosis: A Systematic Review and Meta-analysis.

BACKGROUND: A definitive conclusion on the efficacy of mesenchymal stromal cells-derived conditioned medium (MSCs-CM) in pulmonary fibrosis has not yet been reached. Therefore, the present meta-analysis intends to investigate the efficacy of MSCs-CM administration on improvement of pulmonary fibrosis. METHODS: An extensive search was performed on the Medline, Embase, Scopus and Web of Science databases by the end of August 2019. Outcomes in the present study included pulmonary fibrosis score, lung collagen deposition, lung collagen expression, transforming growth factor ß1 (TGF-ß1) expression and interleukin-6 expression. Finally, the data were pooled and an overall standardized mean difference (SMD) with a 95% confidence interval (CI) was reported. RESULTS: Data from seven studies were included. Analyses showed that administration of MSCs-CM significantly improved pulmonary fibrosis (SMD = -2.36; 95% CI: -3.21, -1.51). MSCs-CM administration also attenuated lung collagen deposition (SMD = -1.70; 95% CI: -2.18, -1.23) and decreased expression of type I collagen (SMD = -6.27; 95% CI: -11.00, -1.55), type III collagen (SMD = -5.16; 95% CI: -9.86, -0.47), TGF- ß1 (SMD = -3.36; 95% CI: - 5.62, -1.09) and interleukin-6 (SMD = -1.69; 95% CI: - 3.14, -0.24). CONCLUSION: The present meta-analysis showed that administration of MSCs-CM improves pulmonary fibrosis. It seems that the effect of MSCs-CM was mediated by reducing collagen deposition as well as inhibiting the production of inflammatory chemokines such as TGF-ß1 and interleukin 6 (IL-6). Since there is no evidence on the efficacy of MSCs-CM in large animals, further studies are needed to translate the finding to clinical studies.

The novel missense mutation Met48Lys in FKBP22 changes its structure and functions.

Mutations in the FKBP14 gene encoding FKBP22 (FK506 Binding Protein 22 kDa) cause kyphoscoliotic Ehlers-Danlos Syndrome (kEDS). The first clinical report showed that a lack of FKBP22 protein due to mutations causing nonsense-mediated decay of the mRNA leads to a wide spectrum of clinical phenotypes including progressive kyphoscoliosis, joint hypermobility, hypotonia, hyperelastic skin, hearing loss and aortic rupture. Our previous work showed that these phenotypic features could be correlated with the functions of FKBP22, which preferentially binds to type III, VI and X collagens, but not to type I, II or V collagens. We also showed that FKBP22 catalyzed the folding of type III collagen through its prolyl isomerase activity and acted as a molecular chaperone for type III collagen. Recently, a novel missense mutation Met48Lys in FKBP22 was identified in a patient with kEDS. In this report, we expand the list of substrates of FKBP22 and also demonstrate that the Met48Lys mutation diminishes the activities of FKBP22, indicating that pathology can arise from absence of FKBP22, or partial loss of its function.

Type III collagen (COL3A1): Gene and protein structure, tissue distribution, and associated diseases.

Collagen alpha-1(III) chain, also known as the alpha 1 chain of type III collagen, is a protein that in humans is encoded by the COL3A1 gene. Three alpha 1 chains are required to form the type III collagen molecule which has a long triple-helical domain. Type III collagen, an extracellular matrix protein, is synthesized by cells as a pre-procollagen. It is found as a major structural component in hollow organs such as large blood vessels, uterus and bowel. Other functions of type III collagen include interaction with platelets in the blood clotting cascade and it is also an important signaling molecule in wound healing. Mutations in the COL3A1 gene cause the vascular type of Ehlers-Danlos syndrome (vEDS; OMIM 130050). It is the most serious form of EDS, since patients often die suddenly due to a rupture of large arteries. Inactivation of the murine Col3a1 gene leads to a shorter life span in homozygous mutant mice. The mice die prematurely from a rupture of major arteries mimicking the human vEDS phenotype. The biochemical and cellular effects of COL3A1 mutations have been studied extensively. Most of the glycine mutations lead to the synthesis of type III collagen with reduced thermal stability, which is more susceptible for proteinases. Intracellular accumulation of this normally secreted protein is also found. Ultrastructural analyses have demonstrated dilated rough endoplasmic reticulum and changes in the diameter of collagen fibers. Other clinical conditions associated with type III collagen are several types of fibroses in which increased amounts of type III collagen accumulate in the target organs.

Using synthetic peptides and recombinant collagen to understand DDR-collagen interactions.

The discoidin domain receptors, DDR1 and DDR2, are a subfamily of receptor tyrosine kinases that are activated upon binding to collagen. DDR-collagen interactions play an important role in cell proliferation and migration. Over the past few decades, synthetic peptides and recombinant collagen have been developed as tools to study the biophysical characteristics of collagen and various protein-collagen interactions. Herein we review how these techniques have been used to understand DDR-collagen interactions. Using synthetic collagen-like peptides, the GVM-GFO motif has been found to be the major binding site on collagens II and III for DDR1 and DDR2. An X-ray co-crystal structure of the DDR2 DS domain bound to a synthetic collagen-like peptide containing the GVM-GFO motif further provides molecular details of the DDR-collagen interactions. Recombinant collagen has also been used to provide further validation of the GVM-GFO binding motif. Although GVM-GFO has been defined as the minimal binding site, in synthetic peptide studies at least two triplets N-terminal to the essential GVM-GFO binding motif in collagen III sequence are needed for DDR2 activation at high peptide concentrations.

Incorporation of types I and III collagen in tunable hyaluronan hydrogels for vocal fold tissue engineering.

Vocal fold scarring is the fibrotic manifestation of a variety of voice disorders, and is difficult to treat. Tissue engineering therapies provide a potential strategy to regenerate the native tissue microenvironment in order to restore vocal fold functionality. However, major challenges remain in capturing the complexity of the native tissue and sustaining regeneration. We hypothesized that hydrogels with tunable viscoelastic properties that present relevant biological cues to cells might be better suited as therapeutics. Herein, we characterized the response of human vocal fold fibroblasts to four different biomimetic hydrogels: thiolated hyaluronan (HA) crosslinked with poly(ethylene glycol) diacrylate (PEGDA), HA-PEGDA with type I collagen (HA-Col I), HA-PEGDA with type III collagen (HA-Col III) and HA-PEGDA with type I and III collagen (HA-Col I-Col III). Collagen incorporation allowed for interpenetrating fibrils of collagen within the non-fibrillar HA network, which increased the mechanical properties of the hydrogels. The addition of collagen fibrils also reduced hyaluronidase degradation of HA and hydrogel swelling ratio. Fibroblasts encapsulated in the HA-Col gels adopted a spindle shaped fibroblastic morphology by day 7 and exhibited extensive cytoskeletal networks by day 21, suggesting that the incorporation of collagen was essential for cell adhesion and spreading. Cells remained viable and synthesized new DNA throughout 21 days of culture. Gene expression levels significantly differed between the cells encapsulated in the different hydrogels. Relative fold changes in gene expression of MMP1, COL1A1, fibronectin and decorin suggest higher degrees of remodeling in HA-Col I-Col III gels in comparison to HA-Col I or HA-Col III hydrogels, suggesting that the former may better serve as a natural biomimetic hydrogel for tissue engineering applications. STATEMENT OF SIGNIFICANCE: Voice disorders affect about 1/3rd of the US population and significantly reduce quality of life. Patients with vocal fold fibrosis have few treatment options. Tissue engineering therapies provide a potential strategy to regenerate the native tissue microenvironment in order to restore vocal fold functionality. Various studies have used collagen or thiolated hyaluronan (HA) with gelatin as potential tissue engineering therapies. However, there is room for improvement in providing cells with more relevant biological cues that mimic the native tissue microenvironment and sustain regeneration. The present study introduces the use of type I collagen and type III collagen along with thiolated HA as a natural biomimetic hydrogel for vocal fold tissue engineering applications.

Characterization by high-resolution crystal structure analysis of a triple-helix region of human collagen type III with potent cell adhesion activity.

Collagen is one of the most abundant and important proteins in the human body. Human collagen type III (hCOL3A1) belongs to the fibril-forming collagens and is widely distributed in extensible connective tissue like skin, internal organs, or the vascular system. It plays key roles in wound healing, collagen fibrillogenesis, and normal cardiovascular development in human. The charged residues are considered to be an important characteristic of hCOL3A1, especially for collagen binding and recognition. Here we found that a triple helix fragment of hCOL3A1, Gly489-Gly510, contained multiple charged residues, as well as representative Glu-Lys-Gly and Glu-Arg-Gly charged triplets. We solved the crystal structure of this new fragment to a high-resolution of 1.50 Šand identified some important conformations of this new triple-helix region, including strong hydrogen bonds in interchain and interhelical interactions in addition to obvious flexible bending for the triple helix. We also found that the synthetic collagen peptides around this region exhibited potent activities through integrin-mediated peptide-membrane interaction. We then developed a method to produce a recombinant protein consisting of 16 tandem repeats of the triple-helix fragment of hCOL3A1 with strong activity without cytotoxicity. These results provide a strong base for further functional studies of human collagen type III and the method developed in this study can be applied to produce hCOL3A1-derived proteins or other tandem-repeat proteins with membrane adhesion activity.

Wet spinning and riboflavin crosslinking of collagen type I/III filaments.

Reconstituted fibrillary collagen is one of the most advantageous biomaterials for biomedical applications. The objective of the research project described in this paper was to evaluate whether riboflavin-induced photo-crosslinking could be used as a non-toxic alternative to glutaraldehyde (GA)-crosslinking for the preparation of wet spun collagen filaments. Collagen filaments were produced on a laboratory wet spinning line and crosslinked with GA or riboflavin with and without UV exposure. Based on mechanical and thermal analyses, it was concluded that the combination of riboflavin and UV light leads to crosslinked collagen filaments having improved mechanical and thermal properties. Furthermore, riboflavin-crosslinked filaments exhibited a higher cytocompatibility for human mesenchymal stem cells compared to GA-crosslinked filaments.

Environmentally Controlled Curvature of Single Collagen Proteins.

The predominant structural protein in vertebrates is collagen, which plays a key role in extracellular matrix and connective tissue mechanics. Despite its prevalence and physical importance in biology, the mechanical properties of molecular collagen are far from established. The flexibility of its triple helix is unresolved, with descriptions from different experimental techniques ranging from flexible to semirigid. Furthermore, it is unknown how collagen type (homo- versus heterotrimeric) and source (tissue derived versus recombinant) influence flexibility. Using SmarTrace, a chain-tracing algorithm we devised, we performed statistical analysis of collagen conformations collected with atomic force microscopy to determine the protein's mechanical properties. Our results show that types I, II, and III collagens-the key fibrillar varieties-exhibit similar molecular flexibilities. However, collagen conformations are strongly modulated by salt, transitioning from compact to extended as KCl concentration increases in both neutral and acidic pH. Although analysis with a standard worm-like chain model suggests that the persistence length of collagen can attain a wide range of values within the literature range, closer inspection reveals that this modulation of collagen's conformational behavior is not due to changes in flexibility but rather arises from the induction of curvature (either intrinsic or induced by interactions with the mica surface). By modifying standard polymer theory to include innate curvature, we show that collagen behaves as an equilibrated curved worm-like chain in two dimensions. Analysis within the curved worm-like chain model shows that collagen's curvature depends strongly on pH and salt, whereas its persistence length does not. Thus, we find that triple-helical collagen is well described as semiflexible irrespective of source, type, pH, and salt environment. These results demonstrate that collagen is more flexible than its conventional description as a rigid rod, which may have implications for its cellular processing and secretion.

Functional disorders of the temporomandibular joints: Internal derangement of the temporomandibular joint.

Temporomandibular joint (TMJ) is one of the most complex joints of the human body. Due to its unique movement, in terms of combination of rotation and translator movement, disc of the joint plays an important role to maintain its normal function. In order to sustain the normal function of the TMJ, disc must be kept in proper position as well as maintain normal shape in all circumstances. Once the disc is not any more in its normal position during function of the joint, disturbance of the joint can be occurred which will lead to subsequent distortion of the disc. Shape of the disc can be influenced by many factors i.e.: abnormal function or composition of the disc itself. Etiology of the internal derangement of the disc remains controversial. Multifactorial theory has been postulated in most of previous manuscripts. Disc is composed of mainly extracellular matrix. Abnormal proportion of collagen type I & III may also leads to joint hypermobility which may be also a predisposing factor of this disorder. Thus it can be recognized as local manifestation of a systemic disorder. Different treatment modalities with from conservative treatment to surgical intervention distinct success rate have been reported. Recently treatment with extracellular matrix injection becomes more and more popular to strengthen the joint itself. Since multifactorial in character, the best solution of the treatment modalities should be aimed to resolve possible etiology from different aspects. Team work may be indication to reach satisfied results.

Type III collagen affects dermal and vascular collagen fibrillogenesis and tissue integrity in a mutant Col3a1 transgenic mouse model.

Type III collagen is a major fibrillar collagen consisting of three identical α1(III)-chains that is particularly present in tissues exhibiting elastic properties, such as the skin and the arterial wall. Heterozygous mutations in the COL3A1 gene result in vascular Ehlers-Danlos syndrome (vEDS), a severe, life-threatening disorder, characterized by thin, translucent skin and propensity to arterial, intestinal and uterine rupture. Most human vEDS cases result from a missense mutation substituting a crucial glycine residue in the triple helical domain of the α1(III)-chains. The mechanisms by which these mutant type III collagen molecules cause dermal and vascular fragility are not well understood. We generated a transgenic mouse line expressing mutant type III collagen, containing a typical helical glycine substitution (p.(Gly182Ser)). This Col3a1Tg-G182S mouse line displays a phenotype recapitulating characteristics of human vEDS patients with signs of dermal and vascular fragility. The Col3a1Tg-G182S mice develop severe transdermal skin wounds, resulting in early demise at 13-14weeks of age. We found that this phenotype was associated with a reduced total collagen content and an abnormal collagen III:I ratio, leading to the production of severely malformed collagen fibrils in the extracellular matrix of dermal and arterial tissues. These results indicate that expression of the glycine substitution in the α1(III)-chain disturbs formation of heterotypic type III:I collagen fibrils, and thereby demonstrate a key role for type III collagen in collagen fibrillogenesis in dermal and arterial tissues.

Single-Molecule Assay for Proteolytic Susceptibility: Force-Induced Collagen Destabilization.

Force plays a key role in regulating dynamics of biomolecular structure and interactions, yet techniques are lacking to manipulate and continuously read out this response with high throughput. We present an enzymatic assay for force-dependent accessibility of structure that makes use of a wireless mini-radio centrifuge force microscope to provide a real-time readout of kinetics. The microscope is designed for ease of use, fits in a standard centrifuge bucket, and offers high-throughput, video-rate readout of individual proteolytic cleavage events. Proteolysis measurements on thousands of tethered collagen molecules show a load-enhanced trypsin sensitivity, indicating destabilization of the triple helix.

Transcriptome analysis of skin fibroblasts with dominant negative COL3A1 mutations provides molecular insights into the etiopathology of vascular Ehlers-Danlos syndrome.

Vascular Ehlers-Danlos syndrome (vEDS) is a dominantly inherited connective tissue disorder caused by mutations in the COL3A1 gene that encodes type III collagen (COLLIII), which is the major expressed collagen in blood vessels and hollow organs. The majority of disease-causing variants in COL3A1 are glycine substitutions and in-frame splice mutations in the triple helix domain that through a dominant negative effect are associated with the severe clinical spectrum potentially lethal of vEDS, characterized by fragility of soft connective tissues with arterial and organ ruptures. To shed lights into molecular mechanisms underlying vEDS, we performed gene expression profiling in cultured skin fibroblasts from three patients with different structural COL3A1 mutations. Transcriptome analysis revealed significant changes in the expression levels of several genes involved in maintenance of cell redox and endoplasmic reticulum (ER) homeostasis, COLLs folding and extracellular matrix (ECM) organization, formation of the proteasome complex, and cell cycle regulation. Protein analyses showed that aberrant COLLIII expression is associated with the disassembly of many structural ECM constituents, such as fibrillins, EMILINs, and elastin, as well as with the reduction of the proteoglycans perlecan, decorin, and versican, all playing an important role in the vascular system. Furthermore, the altered distribution of the ER marker protein disulfide isomerase PDI and the strong reduction of the COLLs-modifying enzyme FKBP22 are consistent with the disturbance of ER-related homeostasis and COLLs biosynthesis and post-translational modifications, indicated by microarray analysis. Our findings add new insights into the pathophysiology of this severe vascular disorder, since they provide a picture of the gene expression changes in vEDS skin fibroblasts and highlight that dominant negative mutations in COL3A1 also affect post-translational modifications and deposition into the ECM of several structural proteins crucial to the integrity of soft connective tissues.

Regulation of periodontal ligament-derived cells by type III collagen-coated hydroxyapatite.

BACKGROUND: The periodontal ligament (PDL), which maintains homeostasis in the periodontium, is a group of specialized connective tissue fibers attached to both the cementum and alveolar bone. Regeneration of periodontium with PDL cells has been investigated, and the chemical and molecular structures of scaffolds control the adhesion and differentiation of cells. Therefore, the development of adequate materials for PDL-derived cells is essential to regenerate the periodontium. OBJECTIVE: We evaluated the suitable passage time for PDL-derived cells and investigated the behaviors of PDL-derived cells grown on hydroxyapatite (HAp) scaffolds coated with type I and type III collagen. METHODS: PDL-derived cells were isolated with enzyme from the upper molars of male Wister rats. After characterization of HAp, type I collagen, and type III collagen, PDL-derived cells at passage 2 were seeded onto collagen-coated HAp. Cell adhesion, proliferative potential, and osteoconductivity were analyzed with immunostaining, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays, Alizarin S staining, and real-time polymerase chain reaction. RESULTS: Type I and III collagens were successfully coated on HAp. Gene expression analysis revealed that passage 2 was suitable for maintaining differentiation potential. Proliferative potential and cell adhesion were significantly higher on type III collagen than on HAp alone or type I collagen. In contrast, the osteoconductivity of type III collagen was significantly lower than those of HAp and type I collagen. CONCLUSION: PDL-derived cells on type I collagen differentiated into osteogenic cells and formed hard tissues. However, type III collagen enhanced the adhesion of PDL-derived cells and inhibited mineralization.

The collαgen III fibril has a "flexi-rod" structure of flexible sequences interspersed with rigid bioactive domains including two with hemostatic roles.

Collagen III is critical to the integrity of blood vessels and distensible organs, and in hemostasis. Examination of the human collagen III interactome reveals a nearly identical structural arrangement and charge distribution pattern as for collagen I, with cell interaction domains, fibrillogenesis and enzyme cleavage domains, several major ligand-binding regions, and intermolecular crosslink sites at the same sites. These similarities allow heterotypic fibril formation with, and substitution by, collagen I in embryonic development and wound healing. The collagen III fibril assumes a "flexi-rod" structure with flexible zones interspersed with rod-like domains, which is consistent with the molecule's prominence in young, pliable tissues and distensible organs. Collagen III has two major hemostasis domains, with binding motifs for von Willebrand factor, α2ß1 integrin, platelet binding octapeptide and glycoprotein VI, consistent with the bleeding tendency observed with COL3A1 disease-causing sequence variants.