A DNA typing panel of 201 genetic markers for degraded samples: development and validation.

With the increasing number of complex forensic cases in recent years, it's more important to combine the different types of genetic markers such as short tandem repeats (STRs), single nucleotide polymorphisms (SNPs), insertion/deletion polymorphisms (InDels), and microhaplotypes (MHs) to provide more genetic information. In this study, we selected totally 201 genetic markers, including 24 autosomes STRs (A-STRs), 24 Y chromosome STRs (Y-STRs), 110 A-SNPs, 24 Y-SNPs, 9 A-InDels, 1 Y-InDel, 8 MHs, and Amelogenin to establish the HID_AM Panel v1.0, a Next-Generation Sequencing (NGS) detection system. According to the validation guidelines of the Scientific Working Group on DNA Analysis Methods (SWGDAM), the repeatability, accuracy, sensitivity, suitability for degraded samples, species specificity, and inhibitor resistance of this system were assessed. The typing results on 48 STRs and Amelogenin of this system were completely consistent with those obtained using capillary electrophoresis. This system accurately detected 79 SNPs as parallelly confirmed by a FGx sequencer with the ForenSeq™ DNA Signature Prep Kit. Complete allele typing results could be obtained with a DNA input of no less than 200 pg. The detection success rate of this system was significantly higher than that of the GlobalFiler™ kit when the degradation index of mock degraded sample was greater than 15.87. When the concentration of hematin in the amplification system was ≤40 µmol/L, indigo blue was ≤2 mmol/L, or humic acid was ≤15 ng/µL, amplification was not significantly inhibited. The system barely amplified the DNA extract from duck, mouse, cow, rabbit, and chick. The detection rate of STRs on routine samples of this panel is 99.74%, while all the SNPs, InDels, and MHs were successfully detected. In summary, we setup a NGS individual typing panel including 201 genetic markers with the high accuracy, sensitivity, species specificity, and inhibitors resistance, which is applicable for individual identification of degraded samples.

Recommendations of the Polish-speaking Working Group of the International Society for Forensic Genetics (ISFG-PL) regarding the disclosure of biological traces and the handling of evidence for identification tests. / Zalecenia Polskojezycznej Grupy Miedzynarodowego Towarzystwa Genetyki Sadowej (ISFG-PL) dotyczace ujawniania i identyfikacji sladów biologicznych przeznaczonych do badan genetycznych.

The purpose of this paper is to formulate recommendations for the disclosure of biological traces in the laboratory and the handling of forensic evidence submitted for identification tests, recommended by the Polish Speaking Working Group of the International Society for Forensic Genetics. The paper organizes the knowledge of the most relevant stages of preliminary analysis of biological traces based on both literature sources and those resulting from years of research practice. Recommendations formulated in the course of multi-stage expert consultations contained in this study should be used in the development of laboratory procedures applied during the execution.

Biogeographical Ancestry Analyses Using the ForenSeqTM DNA Signature Prep Kit and Multiple Prediction Tools.

The inference of biogeographical ancestry (BGA) can assist in police investigations of serious crime cases and help to identify missing people and victims of mass disasters. In this study, we evaluated the typing performance of 56 ancestry-informative SNPs in 177 samples using the ForenSeq™ DNA Signature Prep Kit on the MiSeq FGx system. Furthermore, we compared the prediction accuracy of the tools Universal Analysis Software v1.2 (UAS), the FROG-kb, and GenoGeographer when inferring the ancestry of 503 Europeans, 22 non-Europeans, and 5 individuals with co-ancestry. The kit was highly sensitive with complete aiSNP profiles in samples with as low as 250pg input DNA. However, in line with others, we observed low read depth and occasional drop-out in some SNPs. Therefore, we suggest not using less than the recommended 1ng of input DNA. FROG-kb and GenoGeographer accurately predicted both Europeans (99.6% and 91.8% correct, respectively) and non-Europeans (95.4% and 90.9% correct, respectively). The UAS was highly accurate when predicting Europeans (96.0% correct) but performed poorer when predicting non-Europeans (40.9% correct). None of the tools were able to correctly predict individuals with co-ancestry. Our study demonstrates that the use of multiple prediction tools will increase the prediction accuracy of BGA inference in forensic casework.

PCR in Forensic Science: A Critical Review.

The polymerase chain reaction (PCR) has played a fundamental role in our understanding of the world, and has applications across a broad range of disciplines. The introduction of PCR into forensic science marked the beginning of a new era of DNA profiling. This era has pushed PCR to its limits and allowed genetic data to be generated from trace DNA. Trace samples contain very small amounts of degraded DNA associated with inhibitory compounds and ions. Despite significant development in the PCR process since it was first introduced, the challenges of profiling inhibited and degraded samples remain. This review examines the evolution of the PCR from its inception in the 1980s, through to its current application in forensic science. The driving factors behind PCR evolution for DNA profiling are discussed along with a critical comparison of cycling conditions used in commercial PCR kits. Newer PCR methods that are currently used in forensic practice and beyond are examined, and possible future directions of PCR for DNA profiling are evaluated.

Estimating bloodstain age in the short term based on DNA fragment length using nanopore sequencer.

We used a nanopore sequencer to quantify DNA fragments > 10,000 bp in size and then evaluated their relationship with short-term bloodstain age. Moreover, DNA degradation was investigated after bloodstains were wetted once with water. Bloodstain samples on cotton gauze were stored at room temperature and low humidity for up to 6 months. Bloodstains stored for 1 day were wetted with nuclease-free water, allowed to dry, and stored at room temperature and low humidity for up to 1 week. The proportion of fragments > 20,000 bp in dry bloodstains tended to decrease over time, particularly for fragments > 50,000 bp in size. This trend was modeled using a power approximation curve, with the highest R2 value (0.6475) noted for fragments > 50,000 bp in size; lower values were recorded for shorter fragments. The proportion of longer fragments was significantly reduced in bloodstains that were dried after being wetted once, and there was significant difference in fragments > 50,000 bp between dry conditions and once-wetted. This result suggests that even temporary exposure to water causes significant DNA fragmentation, but not extensive degradation. Thus, bloodstains that appear fresh but have a low proportion of long DNA fragments may have been wetted previously. Our results indicate that evaluating the proportion of long DNA fragments yields information on both bloodstain age and the environment in which they were stored.

Comparison of DNA recovery methods and locations from regularly-worn hooded jumpers before and after use by a second wearer.

Items of worn clothing are routinely examined for DNA in forensic casework, commonly with the expectation that at least some of the DNA will come from a wearer of the item, so-called 'wearer DNA'. This study investigated DNA recovered from hooded jumpers that were regularly worn and laundered for four weeks and then subsequently worn by a different individual for four hours. This study also systematically investigated whether using different recovery methods or sampling locations on the jumpers might distinguish between DNA deposited by the regular and most recent wearers of clothing. Four volunteers each wore a new hooded jumper regularly (6 h/day, 2 days/week, washed at weekends) during two 4-week periods. At the end of each month, DNA was first recovered by cutting out and mini-taping the inside left cuff, half-collar, pocket and underarm fabric. The jumpers were then worn by a different individual for four hours, and DNA was again recovered by cutting out and mini-taping, but this time from the inside right cuff, half-collar, pocket and underarm fabric. All DNA samples (n = 128) were quantified and profiled. DNA quantities ranged from 0 to âˆ¼40 ng with an outlier of âˆ¼150 ng, and no significant differences were observed among recovery methods and sampling locations, nor whether one or two wearers had worn the jumpers. However, one volunteer consistently deposited significantly more DNA to their jumpers than two other volunteers, confirming the impact of 'shedder status' on DNA deposition during wearing of clothing. When jumpers were regularly worn by one wearer, the majority (72.7-83.3 %) of the samples for all wearers across both months comprised a major profile of the wearer with a minor profile of non-wearer alleles. When jumpers were then worn by a second wearer, the composition of the profiles obtained were generally reproducible across the recovery methods used, the sampling locations and the two replicates of the experiment for each pairing of wearers. However, profile compositions differed between wearer pairings. Overall, ∼60 % of profiles obtained gave a major profile of the regular wearer, whereas âˆ¼30 % gave a major profile of the second wearer. The remaining profiles comprised other much less frequent observations of single-source profiles of each wearer and equal proportions of DNA from both wearers. Non-wearer DNA was also observed in the majority of samples, both before and after jumpers were worn by a second wearer. For one volunteer's jumpers, a recurring non-wearer DNA profile was observed that could be attributed to their romantic partner, and this DNA persisted on the jumpers even after being worn by the second wearer. This study provides insight on the impact of shedder status, multiple wearers, different recovery methods and sampling locations on the quantities of DNA and compositions of DNA profiles recovered from authentically regularly-worn hooded jumpers. The findings also provide a preliminary dataset that can be used to infer activity level probabilities in casework.

An exploratory view into allelic drop-out of sequenced autosomal STRs.

As massively parallel sequencing is implemented in forensic genetics, an understanding of sequence data must accompany these advancements, that is, accurate modeling of data for proper statistical analysis. Allelic drop-out, a common stochastic effect seen in genetic data, is often modeled in statistical analysis of STR results. This proof-of-concept study sequenced several serial dilutions of a standard sample ranging from 4 ng to 7.82 pg to evaluate allelic drop-out trends on a select panel of autosomal STRs using the ForenSeq™ DNA Signature Prep Kit, Primer Set A on the Illumina MiSeq FGx. Parameters assessed included locus, profile, and run specific information. A majority of the allelic drop-out occurred in DNA concentrations less than 31.25 pg. Statistical results indicated a need for locus-specific modeling based on STR descriptors, like simple versus compound repeat patterns. No correlation was seen between average read count of scored alleles and allelic drop-out at a locus. A statistical correlation was observed between the amount of allelic drop-out and the starting amount of DNA in a sample, average read count of a sample, and total read count generated on a flow cell. This study supports using common allelic drop-out factors used in fragment length analysis on sequenced STRs while including additional locus, sample, and run specific information. Results demonstrate multiple factors that can be considered when developing probability of allelic drop-out models for sequenced autosomal STRs including locus-specific analysis, total read count of a profile, and total read count sequenced on a flow cell.

Assessment of Blood and Semen Detection and DNA Collection from Swabs up to Three Months after Deposition on Five Different Cloth Materials.

Body fluid identification plays a crucial role in criminal investigations. Because of their presence in many cases, blood and semen are the most relevant body fluids in forensic sciences. Based on antigen-antibody reactions binding unique proteins for each body fluid, serological assays represent one of the most rapid and highly specific tests for blood and semen. Currently, few studies have assessed the factors affecting body fluid identification by applying these assays. This work aimed to study the effect of different fabrics from clothes and time since deposition on identification through immunochromatographic tests for blood and semen, DNA isolation, and STR profiling from these samples. Body fluids were deposited on black- and white-dyed denim and cotton fabrics, and on leather. Afterward, blood and semen were sampled at 1 day, 30 days, and 90 days after deposition and identified by using the SERATEC® HemDirect Hemoglobin Test and the PSA Semiquant and SERATEC® BLOOD CS and SEMEN CS tests, respectively. Laboratory and crime scene tests presented similar performances for the detection of blood and semen stains on every tested fabric. No differences were found on band intensities between timepoints for all fabrics. It was possible to recover and identify blood and semen samples up to three months after deposition and to obtain full STR profiles from all the tested fabrics. Both body fluid STR profiles showed differences in their quality between 1 and 90 days after deposition for all fabrics except for black cotton for semen samples. Future research will expand the results, assessing body fluid identification on other substrates and under different environmental conditions.

A preliminary study on identification of the blood donor in a body fluid mixture using a novel compound genetic marker blood-specific methylation-microhaplotype.

Blood-containing mixtures are frequently encountered at crime scenes involving violence and murder. However, the presence of blood, and the association of blood with a specific donor within these mixtures present significant challenges in forensic analysis. In light of these challenges, this study sought to address these issues by leveraging blood-specific methylation sites and closely linked microhaplotype sites, proposing a novel composite genetic marker known as "blood-specific methylation-microhaplotype". This marker was designed to the detection of blood and the determination of blood donor within blood-containing mixtures. According to the selection criteria mentioned in the Materials and Methods section, we selected 10 blood-specific methylation-microhaplotype loci for inclusion in this study. Among these loci, eight exhibited blood-specific hypomethylation, while the remaining two displayed blood-specific hypermethylation. Based on data obtained from 124 individual samples in our study, the combined discrimination power (CPD) of these 10 successfully sequenced loci was 0.999999298. The sample allele methylation rate (Ram) was obtained from massive parallel sequencing (MPS), which was defined as the proportion of methylated reads to the total clustered reads that were genotyped to a specific allele. To develop an allele type classification model capable of identifying the presence of blood and the blood donor, we used the Random Forest algorithm. This model was trained and evaluated using the Ram distribution of individual samples and the Ram distribution of simulated shared alleles. Subsequently, we applied the developed allele type classification model to predict alleles within actual mixtures, trying to exclude non-blood-specific alleles, ultimately allowing us to identify the presence of blood and the blood donor in the blood-containing mixtures. Our findings demonstrate that these blood-specific methylation-microhaplotype loci have the capability to not only detect the presence of blood but also accurately associate blood with the true donor in blood-containing mixtures with the mixing ratios of 1:29, 1:19, 1:9, 1:4, 1:2, 2:1, 7:1, 8:1, 31:1 and 36:1 (blood:non-blood) by DNA mixture interpretation methods. In addition, the presence of blood and the true blood donor could be identified in a mixture containing four body fluids (blood:vaginal fluid:semen:saliva = 1:1:1:1). It is important to note that while these loci exhibit great potential, the impact of allele dropouts and alleles misidentification must be considered when interpreting the results. This is a preliminary study utilising blood-specific methylation-microhaplotype as a complementary tool to other well-established genetic markers (STR, SNP, microhaplotype, etc.) for the analysis in blood-containing mixtures.

Establishment and Application of a 42-plex Microhaplotype Assay in Forensic Genetics.

OBJECTIVES: To establish and forensically verify a 42 microhaplotypes (mircohaps, MHs) multiplex assay system based on next-generation sequencing (NGS), and to explore the application value of this system in the practice of forensic genetics. METHODS: A total of 42 highly polymorphic MHs were selected from previous studies, and sequenced by the MiSeq FGxTM platform to verify the repeata-bility, sensitivity, specificity, stability, and mixture analysis ability of the detection system. Through population genetic investigation of 102 unrelated Chinese Han individuals in Liyang City, Jiangsu Province, China, the application value of this system in forensic genetics was evaluated. RESULTS: The sequencing repeatability of the 42-plex MHs assay was 100% and the sensitivity was as low as 0.062 5 ng. The system had the ability to withstand the interference of indigo (≤2 500 ng/µL), humic acid (≤9 ng/µL), hemoglobin(≤20 µmol), and urea (≤200 ng/µL) and to detect mixtures of 2 people (1∶19), 3 people (1∶1∶9) and 4 people (1∶1∶1∶9). Based on 102 individual data, the combined power of discrimination and the combined power of exclusion were 1-3.45×10-30 and 1-3.77×10-11, respectively, and the average effect value of alleles was 2.899. CONCLUSIONS: The 42-plex MHs assay was successfully established in this study and this system has high repeatability and sensitivity, good anti-jamming ability and mixture analysis ability. The 42 MHs are highly polymorphism and have good application value in individual identification and paternity testing.

Technical Note: A simple FTA® based method for the direct STR amplification of human foetal tissues.

Short tandem repeats (STRs) or microsatellites are short, tandemly repeated DNA sequences that involve a repetitive unit of 1-6 bp. DNA isolation and purification from a large number and often compromised samples gives problems to forensic labs for STR typing. Many of the conventional methods used in the isolation and purification of DNA from forensic samples are time consuming, expensive, hazardous for health and are often associated with greater risks of cross contamination. FTA® technology is a method designed to simplify the collection, shipment, archiving and purification of nucleic acid from a wide variety of biological samples. We report a new method for the direct STR amplification which can amplify STR loci from human foetal tissues spotted on FTA cards, bye-passing the need of DNA purification. The STR loci amplified by this method was compared with conventional method of STR profiling and was found absolutely matching. Therefore, this new method is demonstrated to be very useful for fast, less expensive and non- hazardous forensic DNA analysis.

Analysis of 26 STR loci (PowerPlex® Fusion 6C System) in a mestizo population from Mexico city.

BACKGROUND: Short tandem repeats (STRs) are the most widely used genetic markers in forensic genetics. Therefore, it is essential to document genetic population data of new kits designed for human identification purposes to enable laboratories to use these genetic systems to interpret and solve forensic casework. However, in Mexico, there are no studies with the PowerPlex Fusion 6C System, which includes 26 STRs (23 autosomal STRs and 3 Y-STRs). METHODS AND RESULTS: 600 DNA samples from Mexico City were subjected to genotyping using the PowerPlex Fusion 6C System. For autosomal STRs, 312 different alleles were observed. Combined PE and PD were 99.999999809866% and 99.99999999999999999999999818795%, respectively. Genetic distances and AMOVA test showed low but significant differentiation between Mexican populations. CONCLUSIONS: The results reported in this work demonstrate the efficacy of this system for human identification purposes in the population studied and justify its possible application in other Mexican Mestizo populations.

Evaluation of Storage Conditions and the Effect on DNA from Forensic Evidence Objects Retrieved from Lake Water.

DNA analysis of traces from commonly found objects like knives, smartphones, tapes and garbage bags related to crime in aquatic environments is challenging for forensic DNA laboratories. The amount of recovered DNA may be affected by the water environment, time in the water, method for recovery, transport and storage routines of the objects before the objects arrive in the laboratory. The present study evaluated the effect of four storage conditions on the DNA retrieved from bloodstains, touch DNA, fingerprints and hairs, initially deposited on knives, smartphones, packing tapes, duct tapes and garbage bags, and submerged in lake water for three time periods. After retrieval, the objects were stored either through air-drying at room temperature, freezing at -30 °C, in nitrogen gas or in lake water. The results showed that the submersion time strongly influenced the amount and degradation of DNA, especially after the longest submersion time (21 days). A significant variation was observed in success for STR profiling, while mtDNA profiling was less affected by the submersion time interval and storage conditions. This study illustrates that retrieval from water as soon as possible and immediate storage through air-drying or freezing before DNA analysis is beneficial for the outcome of DNA profiling in crime scene investigations.

Performance and characterization of 94 identity-informative SNPs in Northern Han Chinese using ForenSeq ™ DNA signature prep kit.

Target and flanking region (FR) variation at 94 identity-informative SNPs (iSNPs) are investigated in 635 Northern Han Chinese using the ForenSeq DNA Signature Prep Kit on the MiSeq FGx Forensic Genomics System. The dataset presents the following performance characteristics (average values): ≥60% bases with a quality score of 20 or higher (%≥ Q20); >700 × of depth of coverage (DoC) from both Sample Details Reports and Flanking Region Reports; >80% of effective reads; ≥60% of allele coverage ratio (ACR); and ≥70% of inter-locus balance, while some stable low-performance characteristics are also observed: low DoC at rs1736442, rs1031825, rs7041158, rs338882, rs2920816, rs1493232, rs719366, and rs2342747; high noise at rs891700; and imbalanced ACR at rs6955448 and rs338882. The average amplicon length is 69 bp, suitable for detecting degraded samples. Bioinformatic concordance achieves 99.99% between the ForenSeq Universal Analysis Software (UAS) and the Integrative Genomic Viewer (IGV) inspection. Discordance results from flanking region deletions of rs10776839, rs8078417, rs2831700, and rs1454361. Due to FR variants within amplicons detected by massively parallel sequencing (MPS), the increases in the number of unique alleles, effective alleles (Ae), and observed heterozygosity (Hobs) are 46.81%, 4.51%, and 3.29%, respectively. Twelve FR variants are first reported to dbSNP, such as rs1252699848, rs1665500714, rs1771121532, rs2097285015, rs1851671415, rs2045669877, rs2046758811, rs2044248635, rs1251308240, rs1968822112, rs1981638299, and rs1341756746. All 94 iSNPs from target and amplicon data are in Hardy-Weinberg equilibrium (HWE) and independent within autosomes. As expected, forensic parameters from the amplicon data increase significantly on the combined power of discrimination (CPD = 1 - 3.9876 × 10-38) and the combined power of exclusion (CPE = 1 - 6.6690 × 10-8). Additionally, the power of the system effectiveness (CPD = 1 - 6.7054 × 10-72 and CPE = 1 - 4.4719 × 10-20) with sequence-based 27 autosomal STRs and 94 iSNP amplicons in combination is substantially improved compared to one type of marker alone. In conclusion, we have established a traditional length-based and current sequence-based reference database with 58 STRs and 94 iSNPs in the Northern Han Chinese population. We hope these data can serve as a solid reference and foundation for forensic practice.

Effects and considerations of multiplexing ForenSeq Kintelligence libraries with a negative control.

The negative template control or negative amplification control has been an essential component of the forensic DNA analysis workflow that helps monitor contamination. As such, the inclusion of a negative control in forensic DNA analysis has been a requirement for all laboratories audited under the FBI's Quality Assurance Standards. As massively parallel sequencing (MPS) becomes more conventional in forensic laboratories, considerations for the inclusion of a negative control in every sequencing run can be evaluated. Although the inclusion of a negative control in library preparation and the first sequencing run has a practical function, there is less utility for its inclusion in all subsequent sequencing runs for that library preparation. Although this is universal to all MPS assays, it is most relevant for an assay that has a low sample multiplexing capacity, such as the ForenSeq Kintelligence Kit (Qiagen/Verogen, Inc.). The ForenSeq Kintelligence Kit is an investigative genetic genealogy (IGG) sequencing-based assay that targets 10,230 forensically relevant single-nucleotide polymorphisms. The manufacturer recommends multiplexing 3 libraries per sequencing run, which includes controls. The purpose of this study was to investigate the effect of the inclusion of a negative control in every Kintelligence sequencing run. We observed that the library generated from a negative amplification control will take 7%-14% of the run output. The loss of sequencing space taken by a negative control decreased the available output for DNA-containing samples, leading in some cases to allele or locus dropout and accompanying higher numbers of sixth to seventh order unknown associations in GEDmatch PRO.

A developmental validation of the Quick TargSeq 1.0 integrated system for automated DNA genotyping in forensic science for reference samples.

Analysis of short tandem repeats (STRs) is a global standard method for human identification. Insertion/Deletion polymorphisms (DIPs) can be used for biogeographical ancestry inference. Current DNA typing involves a trained forensic worker operating several specialized instruments in a controlled laboratory environment, which takes 6-8 h. We developed the Quick TargSeq 1.0 integrated system (hereinafter abbreviated to Quick TargSeq) for automated generation of STR and DIP profiles from buccal swab samples and blood stains. The system fully integrates the processes of DNA extraction, polymerase chain reaction (PCR) amplification, and electrophoresis separation using microfluidic biochip technology. Internal validation studies were performed using RTyper 21 or DIP 38 chip cartridges with single-source reference samples according to the Scientific Working Group for DNA Analysis Methods guidelines. These results indicated that the Quick TargSeq system can process reference samples and generate STR or DIP profiles in approximately 2 h, and the profiles were concordant with those determined using traditional STR or DIP analysis methods. Thus, reproducible and concordant DNA profiles were obtained from reference samples. Throughout the study, no lane-to-lane or run-to-run contamination was observed. The Quick TargSeq system produced full profiles from buccal swabs with at least eight swipes, dried blood spot cards with two 2-mm disks, or 10 ng of purified DNA. Potential PCR inhibitors (i.e., coffee, smoking tobacco, and chewing tobacco) did not appear to affect the amplification reactions of the instrument. The overall success rate and concordance rate of 153 samples were 94.12% and 93.44%, respectively, which is comparable to other commercially available rapid DNA instruments. A blind test initiated by a DNA expert group showed that the system can correctly produce DNA profiles with 97.29% genotype concordance with standard bench-processing methods, and the profiles can be uploaded into the national DNA database. These results demonstrated that the Quick TargSeq system can rapidly generate reliable DNA profiles in an automated manner and has the potential for use in the field and forensic laboratories.

Genomic structure analysis and construction of DNA fingerprint for four sheep populations.

The Yongdeng Qishan sheep (QS) is a sheep population found locally in China. To gain in-depth knowledge of its population characteristics, three control groups were chosen, comprising the Lanzhou fat-tailed sheep (LFT), TAN sheep (TAN), and Minxian black fur sheep (MBF), inhabiting the nearby environments. This study genotyped a total of 120 individuals from four sheep populations: QS, LFT, TAN, and MBF. Using Specific-Locus Amplified Fragment Sequencing, we conducted genetic diversity, population structure, and selective sweep analysis, and constructed the fingerprint of each population. In total, there were 782 535 single nucleotide polymorphism (SNP) variations identified, with most being situated within regions that are intergenic or intronic. The genetic diversity analysis revealed that the QS population exhibited lower genetic diversity compared to the other three populations. Consistent results were obtained from the principal component, phylogenetic tree, and population structure analysis, indicating significant genetic differences between QS and the other three populations. However, a certain degree of differentiation was observed within the QS population. The linkage disequilibrium (LD) patterns among the four populations showed clear distinctions, with the QS group demonstrating the most rapid LD decline. Kinship analysis supported the findings of population structure, dividing the 90 QS individuals into two subgroups consisting of 23 and 67 individuals. Selective sweep analysis identified a range of genes associated with reproduction, immunity, and adaptation to high-altitude hypoxia. These genes hold potential as candidate genes for marker-assisted selection breeding. Additionally, a total of 86 523 runs of homozygosity (ROHs) were detected, showing non-uniform distribution across chromosomes, with chromosome 1 having the highest coverage percentage and chromosome 26 the lowest. In the high-frequency ROH islands, 79 candidate genes were associated with biological processes such as reproduction and fat digestion and absorption. Furthermore, a DNA fingerprint was constructed for the four populations using 349 highly polymorphic SNPs. In summary, our research delves into the genetic diversity and population structure of QS population. The construction of DNA fingerprint profiles for each population can provide valuable references for the identification of sheep breeds both domestically and internationally.

Trace DNA Transfer in Co-Working Spaces: The Importance of Background DNA Analysis.

The presence of background DNA (bgDNA) can hinder the evaluation of DNA evidence at the activity level, especially when the suspect is expected to be retrieved due to their habitual occupation of the investigated environment. Based on real-life casework circumstances, this study investigates the prevalence, composition, origin, and probable transfer routes of bgDNA found on personal items in situations where their owner and person of interest (POI) share the same workspace. Baseline values of bgDNA were evaluated on the participants' personal items. Secondary and higher degree transfer scenarios of non-self DNA deposition were also investigated. The DNA from co-workers and co-inhabiting partners can be recovered from an individual's personal belongings. Non-self DNA present on the hands and deposited on a sterile surface can generate uninformative profiles. The accumulation of foreign DNA on surfaces over time appears to be crucial for the recovery of comparable profiles, resulting in detectable further transfer onto other surfaces. For a thorough evaluation of touch DNA traces at the activity level, it is necessary to collect information not only about DNA transfer probabilities but also about the presence of the POI as part of the 'baseline' bgDNA of the substrates involved.

Performance of a 74-Microhaplotype Assay in Kinship Analyses.

Microhaplotypes (MHs) consisting of multiple SNPs and indels on short stretches of DNA are new and interesting loci for forensic genetic investigations. In this study, we analysed 74 previously defined MHs in two of the populations that our laboratory provides with forensic genetic services, Danes and Greenlanders. In addition to the 229 SNPs that originally made up the 74 MHs, 66 SNPs and 3 indels were identified in the two populations, and 45 of these variants were included in new definitions of the MHs, whereas 24 SNPs were considered rare and of little value for case work. The average effective number of alleles (Ae) was 3.2, 3.0, and 2.6 in Danes, West Greenlanders, and East Greenlanders, respectively. High levels of linkage disequilibrium were observed in East Greenlanders, which reflects the characteristics of this population that has a small size, and signs of admixture and substructure. Pairwise kinship simulations of full siblings, half-siblings, first cousins, and unrelated individuals were performed using allele frequencies from MHs, STRs and SNPs from Danish and Greenlandic populations. The MH panel outperformed the currently used STR and SNP marker sets and was able to differentiate siblings from unrelated individuals with a 0% false positive rate and a 1.1% false negative rate using an LR threshold of 10,000 in the Danish population. However, the panel was not able to differentiate half-siblings or first cousins from unrelated individuals. The results generated in this study will be used to implement MHs as investigative markers for relationship testing in our laboratory.

The impact of substrate characteristics on the collection and persistence of biological materials, and their implications for forensic casework.

This study assessed the level of nucleic acid persistence on the substrate pre-, and post-swabbing, in order to assess whether biological materials (touch, saliva, semen, and blood) are collected differently depending on the substrate characteristics. A total of 48 samples per deposit and substrate variety (n = 384) were assessed by tracking the persistence of nucleic acid using Diamond™ Nucleic Acid Dye (DD) staining and Polilight photography. The number of DD nucleic acid fluorescent complexes formed post-staining were counted (fluorescent count) and in conjunction with the fluorescence signal intensity (DD nucleic acid complex accumulation) used to estimate the level of nucleic acid persistence on substrates. Touch deposits have shown to be the most persistent deposit with strong adhesion capabilities on both substrate verities. Saliva displayed a higher persistence than semen and/or blood. Semen displayed a high collection efficiency as well as a high fluorescence signal intensity. Blood displayed a low persistence on both substrates with a superior collection efficiency that may also indicate a higher probability to become dislodged from surfaces given a particular activity. Our research has shown that the persistence and recovery of biological deposits is not only measurable but more importantly, may have the potential to be estimated, as such, may build an understanding that can provide valuable guidance for collection efficiency evaluations, and the assessing of the probability of particular profiles, given alternate propositions of means of transfer occurring.