A dual-labeling fluorescent probe to track lysosomal polarity and endoplasmic reticulum dynamics during ferroptosis.

A polarity-sensitive probe was developed to simultaneously label lysosomes and endoplasmic reticulum (ER) via its dansylamide and rhodamine fluorescence, respectively, enabling ratiometric polarity detection and stable dual-labeling. The fragmented ER network and increased lysosomal polarity during ferroptosis were revealed, which facilitates the understanding of ferroptotic mechanisms.

Rapid differentiation of xylazine metabolites using SLIM IM-MS.

Xylazine represents an increased threat to the recreational drug market. In this study, we present a rapid strategy for identifying xylazine and differentiating its common isomeric metabolites using Structures for Lossless Ion Manipulations (SLIM) ion mobility coupled to high-resolution/tandem mass spectrometry (IM-HRMS/MS). Chemical derivatization using dansyl chloride also assisted with separations and led to identification of resolvable reaction product atropisomers.

Development of an Analytical Method for Unsaturated Disaccharides from Heparan Sulfate Using Dansylhydrazine Derivatization and High-Performance Liquid Chromatography with Fluorescence Detection.

Glycosaminoglycans (GAGs), such as heparan sulfate (HS), play essential roles in living organisms. Understanding the functionality of HS and its involvement in disease progression necessitates the sensitive and quantitative detection of HS-derived unsaturated disaccharides. Conventionally, fluorescence derivatization precedes the HPLC analysis of these disaccharides. However, the presence of excess unreacted derivatization reagents can inhibit rapid and sensitive analysis in chromatographic determinations. In this study, we describe analytical methods that use dansylhydrazine as a derivatization agent for the detection and determination of HS-derived unsaturated disaccharides using HPLC. In addition, we have developed a straightforward method for removing excess unreacted reagent using a MonoSpin NH2 column. This method may be employed to remove excess pre-labeling reagents, thereby facilitating the analysis of HS-derived unsaturated disaccharides with satisfactory reproducibility.

Detection and quantification of biogenic amines in cephalopod using dansyl chloride pre-column derivatization-HPLC and their production.

The accurate detection of biogenic amines (BAs) is an important means of ensuring the quality and safety of cephalopod seafood products. In this study, the pre-column derivatization of high-performance liquid chromatography (HPLC) was optimized using dansyl chloride (Dns-Cl) to detect BAs in octopus, cuttlefish, and squid. The reasons for the formation of BAs were investigated by assessing their decarboxylase activity and the rates of decomposition. The findings demonstrated that using Dns-Cl to optimize pre-column derivatization enabled the separation of nine different BAs. The detection limits ranged from 0.07 to 0.25 mg/L, and the results exhibited a high level of linearity (R2 ≥ 0.997). The decarboxylase activity and biodegradation rate positively correlated with the formation of BAs at temperatures below 0°C. Notably, the decarboxylase activity of octopus, cuttlefish, and squid exhibited a significant increase with prolonged storage time, and formyltransferase and carbamate kinase may be the key decarboxylase in cephalopod products. These findings serve as a valuable reference for further investigations into the mechanisms behind BAs production and the development of control technologies for BAs in cephalopod products. This study has successfully demonstrated the effectiveness of the Dns-Cl pre-column derivatization-HPLC method in accurately and efficiently detecting BAs in octopus, cuttlefish, and squid. Moreover, it highlights the influence of decarboxylase content and biodegradation rate on the formation of BAs. Importantly, this method can serve as a reference for detecting BAs in various seafood products.

Development of an easy-to-set-up multiple heart-cutting achiral-chiral LC-LC method for the analysis of branched-chain amino acids in commercial tablets.

In this paper, the development and application of a multiple heart-cutting achiral-chiral LC-LC method (mLC-LC) for the analysis of dansylated (Dns) branched-chain amino acids in commercial tablets are described. In the first dimension, a Waters Xbridge RP C18 achiral column was used under gradient conditions with buffered aqueous solution and acetonitrile. The elution order Dns-valine (Dns-Val) < Dns-isoleucine (Dns-Ile) < Dns-leucine (Dns-Leu) turned out with full resolution between adjacent peaks: 7.25 and 1.50 for the Val/Ile and the Ile/Leu pairs, respectively. A "research" validation study was performed, revealing high accuracy (Recovery%) and precision (RSD%) using two external set solutions, respectively, in the range 93.7%-104.1% and 0.4%-3.2%. The C18 column was connected via a two-position six-port switching valve to the quinidine-based Chiralpak quinidine-anion-exchange chiral column. A water/acetonitrile, 30/70 (v/v) with 50 mM ammonium acetate (apparent pH of 5.5) eluent allowed getting the three enantiomers' pairs resolved: RS equal to 4.3 for Dns-Val and Dns-Ile, and 1.7 for Dns-Leu. The application of the mLC-LC method confirmed that the content of Val, Ile, and Leu in the tablets was compliant with that labeled by the producer. Only l-enantiomers were found in the food supplement, as confirmed by LC-MS/MS analysis.

Dansyl-tagged xanthate ester as a capping agent to synthesize fluorescent silver nanoparticles with binding affinity toward serum albumin.

Developing multifunctional nanomaterials with distinct photochemical properties, such as high quantum yield, improved photostability, and good biocompatibility is critical for a wide range of biomedical applications. Motivated by this, we designed and synthesized a dansyl-tagged xanthate-based capping agent (DX) for the synthesis of fluorescent silver nanoparticles (AgNPs). The capping agent DX was characterized by 1H and 13C-NMR, LC-MS, and FT-IR. The synthesized DX-capped fluorescent AgNPs were thoroughly characterized by UV-visible spectroscopy, fluorescence spectroscopy, field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), dynamic light scattering (DLS), and zeta potential. The fluorescent AgNPs showed distinct surface plasmon resonance absorption at λmax = 414 nm, fluorescence at λmax = 498 nm, quantum yield = 0.24, zeta potential = +18.6 mV, average size = 18.2 nm. Furthermore, the biological activity of the fluorescent AgNPs was validated by its interaction with the most abundant protein in the blood, that is, BSA (Bovine serum albumin) and HSA (Human serum albumin) with binding constant of 2.34 × 104 M-1 and 2.14 × 104 M-1 respectively. Interestingly, fluorescence resonance energy transfer (FRET) was observed between the fluorescent AgNPs and BSA/HSA with a FRET efficiency of 77.23% and 56.36%, respectively, indicating strong interaction between fluorescent AgNPs and BSA/HSA.

Determination of binding characteristics as a measure for effective albumin using different methods.

BACKGROUND & AIMS: Transport functions of albumin are of clinical and pharmacological interest and are determined by albumin's properties like posttranslational modifications or bound ligands. Both are affected in pathological conditions and in therapeutic grade albumin solutions. The term effective albumin concentration was introduced as a measure of functionally intact albumin. Our aim was to evaluate the impact of ligands and modifications with different approaches as a measure of effective albumin. APPROACH & RESULTS: We used a spin labelled fatty acid and dansylsarcosine to characterize binding properties of albumin i) prepared from plasma of patients and healthy control donors, ii) measured directly out of plasma, iii) research grade albumin, iv) in vitro modified albumin, and v) therapeutic infusion solutions before and after removal of stabilizers. Bilirubin is the main determinant for binding function in patients' albumin. In in vitro prepared albumin bound fatty acids correlated with impaired binding. Human nonmercaptalbumin1, not human nonmercaptalbumin2, showed reduced binding properties. Binding and transport function of therapeutic albumin was severely impaired and restored by filtration. Glycation of research grade albumin had no effect on the binding of dansylsarcosine and only a minor effect on fatty acid binding. CONCLUSIONS: Our results suggest that effective albumin -in terms of binding properties- is primarily determined by bound ligands and only to a minor extent by posttranslational modifications. Characterizing albumin directly from plasma better reflects the physiological situation whereas in the case of therapeutic grade albumin stabilizers should be removed to make its binding properties accessible.

Machine learning liquid chromatography retention time prediction model augments the dansylation strategy for metabolite analysis of urine samples.

Herein, a standalone software equipped with a graphic user interface (GUI) is developed to predict liquid chromatography mass spectrometry (LC-MS) retention times (RTs) of dansylated metabolites. Dansylation metabolomics strategy developed by Li et al. narrows down a vast chemical space of metabolites into the metabolites containing amines and phenolic hydroxyls. Combined with differential isotope labeling, e.g., 12C-reagent labeled individual samples spiked with a 13C-reagent labeled reference or pooled sample, LC-MS analysis of the dansylated samples enables accurate relative quantification of all labeled metabolites. Herein, the LC-RTs for dansylated metabolites are predicted using an artificial neural network (ANN) machine-learning model. For the ANN modeling, 315 dansylated urine metabolites obtained from the DnsID database are used. The ANN LC-RT prediction model was reliable, with a mean absolute deviation of 0.74 min for the 30 min LC run. In the RT model, a deviation of more than 2 min was observed in only 3.2% of the total 315 metabolites, while a deviation of 1.5 min or more was observed in 11% of the metabolites. Furthermore, it was found that the LC-RT prediction was also reliable even for metabolites containing both amine and phenolic functional groups that can undergo dansylation on either one of the two functional groups, resulting in the generation of two isomeric forms. This RT-prediction model is embedded into a user-friendly GUI and can be used for identifying nontargeted dansylated metabolites with unknown RTs, along with accurate mass measurements. Furthermore, it is demonstrated that the developed software can help identify metabolites from a urine sample of an anonymous healthy pregnant woman.

Intensity-dependent mass search for improving metabolite database matches in chemical isotope labeling LC-QTOF-MS-based metabolomics.

Liquid chromatography mass spectrometry (LC-MS) has been increasingly used for metabolome analysis. One of the critical steps in the LC-MS metabolome analysis workflow is related to metabolite identification. Among the measured parameters, peak mass is commonly used to search against a database for potential metabolite matches. Higher accuracy mass measurement allows the use of a narrower mass tolerance window for mass search. While various types of mass analyzers can routinely measure a peak mass with an error of less than a few ppm, mass measurement accuracy is not uniform for peaks with different intensities, particularly for quadrupole time-of-flight (QTOF) MS. Herein we present a simple and convenient method to determine the relation between peak intensity and mass error in LC-QTOF-MS-based metabolome analysis, followed by intensity-dependent mass search (IDMS) of a database for metabolite matches. This method is based on running a series of sodium formate mass calibrants, as part of the standard operating procedure (SOP) in LC-MS data acquisition, and then curve-fitting the measured mass errors and peak intensities. We show that, in two different quadrupole time-of-flight (QTOF) mass analyzers, mass accuracy is generally reduced as peak intensity decreases, which is independent of m/z values in the range commonly used for metabolite detection (e.g., m/z < 1000). We demonstrate the improvement in metabolite matches using IDMS in the analyses of dansyl labeled standards and human urine samples. We have implemented the IDMS method in the freely available MCID database at www.mycompoundid.org, which is composed of 8021 known human endogenous metabolites and their predicted metabolic products (375,809 compounds from one metabolic reaction and 10,583,901 compounds from two reactions).

Development of Chemical Isotope Labeling Liquid Chromatography Orbitrap Mass Spectrometry for Comprehensive Analysis of Dipeptides.

Dipeptides have recently attracted considerable attention due to their newly found biological functions and potential biomarkers of diseases. Global analysis of dipeptides (400 common dipeptides in total number) in samples of complex matrices would enable functional studies of dipeptides and biomarker discovery. In this work, we report a method for high-coverage detection and accurate relative quantification of dipeptides. This method is based on differential chemical isotope labeling (CIL) of dipeptides with dansylation and liquid chromatography Orbitrap tandem mass spectrometry (LC-Orbitrap-MS). An optimized LC gradient ensured the separation of dansyl-dipeptides, including positional isomers (e.g., leucine- and isoleucine-containing dipeptides). MS/MS collision energy in Orbitrap MS was optimized to provide characteristic fragment ion information to sequence dansyl-dipeptides. Using the optimized conditions, a CIL standard library consisting of retention time, MS, and MS/MS information of a whole set of 400 dansyl-dipeptides was constructed to facilitate rapid dipeptide identification. For qualitative analysis of dipeptides in real samples, IsoMS data processing software's parameters were tuned to improve the coverage of dipeptide annotation. Data-dependent acquisition was also carried out to improve the reliability of dipeptide identification. As examples of applications, we successfully identified a total of 321 dipeptides in rice wines and 105 dipeptides in human serum samples. For quantitative analysis, we demonstrated that the intensity ratios of the peak pairs from 96% of the dansyl-dipeptides detectable in a 1:1 mixture of 12C- and 13C-labeled rice wine samples were within ±20% of an expected value of 1.0. More than 90% of dipeptides were detected with a relative standard deviation of less than 10%, showing good performance of relative quantification.

Instrument-type effects on chemical isotope labeling LC-MS metabolome analysis: Quadrupole time-of-flight MS vs. Orbitrap MS.

Chemical isotope labeling (CIL) LC-MS is a powerful tool for metabolome analysis with markedly improved metabolomic coverage and quantification accuracy over the conventional LC-MS technique. In addition, with differential isotope labeling, each labeled metabolite is detected as a peak pair in the mass spectra, offering the possibility of differentiating true metabolite peaks from the singlet noise or background peaks. In this study, we examined the effects of instrument type on the detectability of true metabolites with a focus on the comparison of quadrupole time-of-flight (QTOF) and Orbitrap mass spectrometers. Using the same ultra-high-performance liquid chromatography setup and optimized running conditions for QTOF and Orbitrap, we compared the total number of peak pairs detected and identified from the two instruments using human urine and serum as the test samples. Many common peak pairs were detected from the two instruments; however, there were a significant number of unique peak pairs detected in each type of instrument. By combining the datasets obtained using QTOF and Orbitrap, the total number of peak pairs detected could be significantly increased. We also examined the effect of mass resolving power on peak pair detection in Orbitrap (60,000 vs. 120,000 resolution). The observed differences in peak pair detectability were much less than those of QTOF vs. Orbitrap. However, the type of peak pairs detected using different resolutions could be somewhat different, offering the possibility of increasing the overall number of peak pairs by combining the two datasets obtained at two different resolutions. The results from this study clearly indicate that instrument type can have a profound effect on metabolite detection in CIL LC-MS. Therefore, comparison of metabolome data generated using different instruments needs to be carefully done. Moreover, future research (e.g., hardware modifications) is warranted to minimize the differences in order to generate more reproducible metabolome data from different types of instruments.

Rapid and Economical Chemoselective Metabolomics Using Boronate Ester Formation on a Monolithic Substrate.

Although chemoselective labeling strategies show great potential in in-depth description of metabolomics, the associated time and expense limit applications in high-throughput and routine analysis. We report a fast and effective chemoselective labeling strategy based on multifunctionalized monolithic probes. A rapid pH-responsive boronate ester reaction was employed to immobilize and release probe molecules from substrate in 5 min. The mesoporous surface and hierarchically porous channels of the substrate allowed for accelerated labeling reactions. Moreover, the discernible boron beacons allowed for recognition of labeled metabolites with no need for expensive isotopic encoding. This new strategy has been successfully used for submetabolome analysis of yeast cells, serum, and faeces samples, with improved sensitivity for short chain fatty acids up to 1 600 times compared with non-labeled liquid chromatography-mass spectrometry (LC-MS) methods.

Segment Scan Mass Spectral Acquisition for Increasing the Metabolite Detectability in Chemical Isotope Labeling Liquid Chromatography-Mass Spectrometry Metabolome Analysis.

We report a segmented spectrum scan method using Orbitrap MS in chemical isotope labeling (CIL) liquid chromatography-mass spectrometry (LC-MS) for improving the metabolite detection efficiency. In this method, the full m/z range is divided into multiple segments with the scanning of each segment to produce multiple narrow-range spectra during the LC data acquisition. These segmented spectra are separately processed to extract the peak pair information with each peak pair arising from a differentially labeled metabolite in the analysis of a mixture of 13C and 12C reagent-labeled samples. The sublists of peak pairs are merged to form the final peak pair list from the LC-MS run. Various experimental conditions, including automatic gain control (AGC) values, mass resolutions, segment m/z widths, number of segments, and total data acquisition time in the LC run, were examined to arrive at an optimal setting in the segment scan for increasing the number of detectable metabolites while maintaining the same analysis time as in the full scan. The optimal method used a segment width of 120 m/z with 60k resolution for a 16 min CIL LC-MS run. Using dansyl-labeled human urine samples as an example, we demonstrated that this method could detect 5867 peak pairs or metabolites (not features), compared to 3765 peak pairs detectable in a full scan, representing a 56% gain. Out of 5867 peak pairs, 5575 (95.0%) could be identified or mass-matched. The relative quantification accuracy was slightly reduced (81% peak pairs were within ±25% of the expected peak ratio of 1.0 in full, compared to 87% in the full scan) due to the inclusion of more low-abundance peak pairs in the segment scan. The peak ratio measurement precision was not significantly affected by the segment scan. We also showed the increase of the peak pair number detectable from 3843 in the full scan to 7273 (89% gain) using the Orbitrap operated at 120k resolution with a 60 m/z segment width when multiple repeat sample injections were used. Thus, segment scan Orbitrap MS is an enabling method for detecting coeluting metabolites in CIL LC-MS for increasing the metabolomic coverage.

Development of a Simple Dansyl-Based PH Fluorescent Probe in Acidic Medium and Its Application in Cell Imaging.

A simple pH fluorescent probe based on dansyl derivative (Bu-Dns) was synthesized via one-step reaction between dansyl chloride and 4-bromobutan-1-amine hydrobromide. The obtained probe showed good selectivity and sensitivity toward H+ in acidic medium over two pH units (~4-2). At pH > 4, Bu-Dns solution emitted yellow fluorescent light, which became gradually weaker with decreasing pH value. At pH below 2, complete fluorescence quenching occurred. The pH response of Bu-Dns was ascribed to the protonation of dimethylamine group. The lack of influence of metal ion on pH response increases the prevalence of Bu-Dns in the potential detection of pH variation in acidic aqueous media. More importantly, it can sense the intracellular pH change in acidic range.

A Sensor for the Detection of Cr (III) and Fe (III) Ions Based on "Turn Off" Mechanism of Fluorescence with Computational Studies.

A new and innovative fluorescent structure was constructed on Cyclotriveratrylene affiliated to Dansyl chloride (DNSC) and was used to detect Cr (III) and Fe (III) among the various cations by using spectrofluorimetric method. The characterization of the new compound was carried out using the 1H-NMR, 13C-NMR, and ESI-MS techniques. The interaction and role of DNSC-CTV with cations was reviewed. A change in the spectra of absorption directed to the conclusion that there is substantial interaction of Cr (III) and Fe (III) with DNSC-CTV. Furthermore the interaction of the ligand DNSC-CTV with the metal ions Chromium (III) and Iron (III) showed quenching in the emission spectra. Quantum yield of the complexes were calculated and the stern volmer analysis was done to deduce the quenching mechanism of fluorescence to being either static or dynamic. The molecule DNSC-CTV was further studied with the help of computational methods such as molecular docking to study the binding interactions and properties of the molecule.

A Dansyl-Modified Sphingosine Kinase Inhibitor DPF-543 Enhanced De Novo Ceramide Generation.

Sphingosine-1-phosphate (S1P) synthesized by sphingosine kinase (SPHK) is a signaling molecule, involved in cell proliferation, growth, differentiation, and survival. Indeed, a sharp increase of S1P is linked to a pathological outcome with inflammation, cancer metastasis, or angiogenesis, etc. In this regard, SPHK/S1P axis regulation has been a specific issue in the anticancer strategy to turn accumulated sphingosine (SPN) into cytotoxic ceramides (Cers). For these purposes, there have been numerous chemicals synthesized for SPHK inhibition. In this study, we investigated the comparative efficiency of dansylated PF-543 (DPF-543) on the Cers synthesis along with PF-543. DPF-543 deserved attention in strong cytotoxicity, due to the cytotoxic Cers accumulation by ceramide synthase (CerSs). DPF-543 exhibited dual actions on Cers synthesis by enhancing serine palmitoyltransferase (SPT) activity, and by inhibiting SPHKs, which eventually induced an unusual environment with a high amount of 3-ketosphinganine and sphinganine (SPA). SPA in turn was consumed to synthesize Cers via de novo pathway. Interestingly, PF-543 increased only the SPN level, but not for SPA. In addition, DPF-543 mildly activates acid sphingomyelinase (aSMase), which contributes a partial increase in Cers. Collectively, a dansyl-modified DPF-543 relatively enhanced Cers accumulation via de novo pathway which was not observed in PF-543. Our results demonstrated that the structural modification on SPHK inhibitors is still an attractive anticancer strategy by regulating sphingolipid metabolism.

Serial Hydrolysis for the Simultaneous Analysis of Catecholamines and Steroids in the Urine of Patients with Alopecia Areata.

Catecholamines and steroids are well-known neurotransmitters and hormones that rapidly change the excitability of neurons. Alopecia areata is a disease for which the exact cause is unknown, but it is considered to be associated with stress, and so the simultaneous analysis of catecholamines and steroids is required for the diagnosis of alopecia areata. Thus, we herein report the simultaneous analysis of catecholamines and steroids bearing different functional groups for the first time, during which it was necessary to carry out a serial hydrolysis procedure. Following hydrolysis of the urine samples to produce the free forms from the urinary conjugates, ethyl acetate extractions were carried out, and chemical derivatization was performed using dansyl chloride to increase the sensitivity of the liquid chromatography-tandem mass spectrometry method. The matrix effects and recoveries of this analytical method were validated, giving values of 85.4-122.9% and 88.8-123.0%, respectively. In addition, the method accuracy and precision were assessed, giving values of 0.4-21.5% and 2.0-21.6% for the intra-day and inter-day precisions, respectively. This validated method was then applied to identify differences between patients with and without alopecia areata, wherein the metanephrine content was found to be significantly higher in the alopecia areata patient group. This quantitative profiling method can also be applied to steroid-dependent diseases, as well as catecholamine-related diseases.

Determination of Biogenic Amines in Different Parts of Lycium barbarum L. by HPLC with Precolumn Dansylation.

The aim of this work was to characterize biogenic amines (BAs) in different parts of Lycium barbarum L. using HPLC with dansyl chloride derivatization, and jointly, to provide referential data for further exploration and utilization of Lycium barbarum L. The linear correlation coefficients for all BAs were above 0.9989. The limits of detection and quantification were 0.015-0.075 and 0.05-0.25 µg/mL, respectively. The relative standard deviations for the intra-day and inter-day precision were 0.66-2.69% and 0.91-4.38%. The described method has good repeatability and intermediate precision for the quantitative determination of BAs in different parts of Lycium barbarum L. Satisfactory recovery for all amines was obtained (79.3-110.3%). The result showed that there were four kinds of BAs. The highest putrescine content (20.9 ± 3.2 mg/kg) was found in the flower. The highest histamine content (102.7 ± 5.8 mg/kg) was detected in the bark, and the highest spermidine (13.3 ± 1.6 mg/kg) and spermine (23.7 ± 2.0 mg/kg) contents were detected in the young leaves. The high histamine (HIS) content in the bark may be one of the reasons why all of the parts of Lycium barbarum L., except the bark, are used for medicine or food in China. Meanwhile, the issue of the high concentration of HIS should be considered when exploiting or utilizing the bark of Lycium barbarum L.

Facile preparation of ethanediamine-ß-cyclodextrin modified capillary column for electrochromatographic enantioseparation of Dansyl amino acids.

Herein, the fabrication of a fascinating multifunctional cyclodextrin (CD) chiral stationary phase and its chiral separation performance in capillary electrochromatography are proposed. A facile interfacial polymerization was used to anchor ethanediamine-ß-cyclodextrin (EDA-ß-CD) polymerized with trimesoyl chloride (TMC) and to form the chiral stationary phase (CSP) composite onto the surface wall of the capillary. The characters of prepared columns were confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray Photoelectron Spectrometer (XPS), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). This novel CSP offers multi-typical interactions including hydrogen bonding, π-interaction, hydrophobic and electrostatic interaction as well as steric effects which contribute to prominent chiral recognition for Dansyl-DL-amino acids in CEC modes. The EDA-ß-CD modified column showed eminent enantioseparation performance towards five Dansyl-DL-amino acids (the DL-forms of valine, threonine, leucine, phenylalanine, serine). Besides, the prepared columns were perfectly reproducible and stable. The relative standard deviations of the enantiomer retention times for intra-day (n = 5), inter-day (n = 3) runs and column-to-columns (n = 3) are below 0.54%, 1.35% and 4.89%, individually. This innovative chiral stationary phase shows a broader application view and scope in chiral recognition domain.

Design, synthesis and cell imaging of a simple peptide-based probe for the selective detection of RNA.

Here we present a novel peptide-based fluorescent "turn-on" molecule P1 for detecting RNA, in a double or single strand, AU-rich or CG-rich. Both computational and experimental studies indicate that the detection efficiency depends on the binding affinity of P1 and conformational changes. P1 could be applied for cell imaging without any additional transfection vectors. Selective detection of RNA in cells was determined by RNase digestion. Successful application of P1 for RNA imaging in cell mitosis reveals that it may have broad applications in research, biotechnology and medical science.