CBCT assessment of mandibular molar furcation following root canal retreatment using engine-driven instruments.

This study employed e-Vol DXS cone beam computed tomography (CBCT) software to assess dentin remnants in the furcation area of mesial canals in mandibular molars during root canal retreatment (RCR). Four groups (Reciproc®, ProTaper Next®, Race Evo®, Protaper Gold®) were subjected to RCR, and CBCT images were captured before (T1) and after (T2) treatment. Measurements of remaining dentin thickness at 1 mm and 3 mm below the furcation were scrutinized. Results revealed no significant differences in mean thicknesses of mesiobuccal (MB) and mesiolingual (ML) canals at 1 mm and 3 mm from the furcation pre-treatment (T1). Post-treatment (T2) showed analogous findings, with no significant differences in mean thicknesses. However, disparities were found between MB and ML canals at both distances, both before and after retreatment. In essence, the evaluated instruments exhibited safety in RCR, implying that they are appropriate for use in critical areas of mandibular molars without inducing excessive wear. This study underscores the reliability of these instruments in navigating danger zones during RCR, and contributes valuable insights for dental practitioners who handle complex root canal scenarios in mandibular molars.

Comparison of the biomechanical effects of the post-core crown, endocrown and inlay crown after deep margin elevation and its clinical significance.

BACKGROUND: The purpose of this in vitro study was to compare and evaluate the stress distribution of maxillary first premolar residual crowns restored with post-core crowns, endocrowns and inlay crowns after deep margin elevation, to explore the fitting restoration for residual crowns using finite element analysis. METHODS: A healthy complete right maxillary first premolar from a male adult was scanned by cone beam computed tomography (CBCT). The finite element model of the tooth was established by reverse engineering software such as Mimics, Geomagic and Hypermesh. On this basis, the residual crown model after deep margin elevation was made, and the experimental group models were divided into three groups, those restored with post core crowns, endocrowns and inlay crowns. Vertical and oblique static loads were applied to the experimental models to simulate the force on the tooth during mastication (the loading position was located in the central fossa of the occipital surface, and the load was 100 N) using Abaqus software. RESULTS: The peak value and distribution of von Mises stress in each part of the experimental model were observed. After deep margin elevation, the peak dentin von Mises stresses were lower than the tensile strength of normal dentin in the post-core crown, endocrown, and inlay crown groups; the lowest stress results were found in the post-core crown group for the dentin, restoration, enamel, and deep margin elevation (DME) layers under vertical and oblique loading. In terms of stress distribution clouds, the peak stresses in the dentin tissue were located in the apical 1/3 of the root after postcore crown restorations for both loads, while stress concentrations were evident in the cervical and root areas after endocrown and inlay crown restorations; regardless of the load and restoration method, the corresponding stress concentration areas appeared at the junction of the DME and dentin tissue at the loading site of the restorations; CONCLUSIONS: Post-core crowns, endocrowns and inlay crowns can be used to restore residual crowns after deep margin elevation, and post-core crowns can better protect the residual tooth tissue.

Comparison of clinical efficacy between autologous partially demineralized dentin matrix and deproteinized bovine bone mineral for bone augmentation in orthodontic patients with alveolar bone deficiency: a randomized controlled clinical trial.

BACKGROUND: It is common to see patients who need orthodontic treatment but with insufficient alveolar bone volume. However, safe and effective tooth movement requires sufficient alveolar bone width and height. The aim of this study is to compare the bone augmentation efficacy of Autologous Partially Demineralized Dentin Matrix (APDDM) and Deproteinized Bovine Bone Mineral (DBBM) in orthodontic patients with insufficient bone by using a randomized controlled clinical trial approach. MATERIALS AND METHODS: Twenty-seven orthodontic patients involving 40 posterior teeth alveolar sites (n = 40) with insufficient alveolar bone volume were randomly divided into a control group (n = 20) and an experimental group (n = 20). The patients in the experimental group were treated with APDDM, and those in the control group were treated with DBBM. After surgery, the adjacent teeth are moved toward the bone grafting sites according to the orthodontic treatment plan. Patients completed a postoperative response questionnaire by the Visual Analogue Scale (VAS) score to indicate pain and swelling in the bone grafted area at the time of suture removal; and CBCT scans were conducted before surgery, 6 months and 2 years after surgery to assess changes in buccal and central alveolar heights, as well as widths at the alveolar ridge apex and 3 mm, 5 mm below the apex, respectively. The CBCT image sequences were imported into Mimics 21.0 software in DICOM format. The data of the patients in both groups were collected and analyzed by SPSS 25.0. RESULTS: The VAS scores were significantly lower in the APDDM group than in the DBBM group (p < 0.05). Significant increases were observed in alveolar bone height and width at 6 months and 2 years postoperative (p < 0.05); At 2 years, the APDDM group exhibited a reduction in buccal crest height and in 3 mm, 5 mm width below alveolar ridge apex, relative to 6 months (p < 0.05), while the DBBM group showed a decrease only in the central height of the alveolar bone (p < 0.05). There was a significant bone augmentation increase found only 3 mm below the alveolar ridge apex in the APDDM group compared with the DBBM group among all 6 months group comparison (p < 0.05). At 2 years, the augmentation effects were similar across both groups (p > 0.05). CONCLUSION: Radiomics analysis indicates that APDDM serves as a viable bone augmentation material for orthodontic patients with insufficient alveolar bone volume, achieving comparable clinical efficacy to DBBM. Additionally, APDDM is associated with a milder postoperative response than DBBM. THE REGISTRATION NUMBER (TRN): ChiCTR2400084607.

Evaluation and comparison of autologous particulate dentin with demineralized freeze dried bone allograft in ridge preservation procedures - a prospective clinical study.

OBJECTIVES: To compare effectiveness of Autologous Particulate Dentin (APD) with Demineralized Freeze-Dried Bone Allograft (DFDBA) in ridge preservation, using radiographic and clinical parameters. MATERIALS AND METHODS: Thirty subjects with indication of mandibular posterior teeth extraction were randomly assigned to either test or control group. After atraumatic extraction, ridge preservation was performed using APD or DFDBA mixed with i-PRF in test and control groups respectively. Both groups had sockets sealed with A-PRF membrane. Clinical parameters (plaque, gingival and healing indices) and radiographic parameters (vertical ridge height, horizontal ridge width) were assessed at baseline and 6 months using CBCT. Statistical analysis was performed using an independent t-test to compare clinical and radiographic parameters between the groups. RESULTS: Both groups had significant decreases in ridge dimensions over 6 months (p < 0.001). The test group showed less reduction in ridge dimensions than control group at 6 months (p < 0.001). Mean change in vertical height was not significant (1.37 ± 1.32, 1.7311 ± 0.563), but in horizontal ridge width (1.3120 ± 1.13, 1.8093 ± 1.16) was significantly different between test and control groups respectively. There was no statistical difference in clinical parameters between the groups at 6 months (p > 0.001). CONCLUSIONS: APD grafts resulted in significant improvements in radiographic parameters, specifically in vertical ridge height and horizontal ridge width, compared to DFDBA group. CLINICAL RELEVANCE: Autologous particulate dentin is a promising, versatile substitute for regenerative procedures. While more research on its long-term efficacy and application is needed, current evidence suggests it could significantly improve patient care and outcomes.

Does dynamic navigation system preserve more dentine? - A systematic review.

OBJECTIVE: This systematic review aims to comparatively analyse the amount of dentin removal by free hand and static guided endodontics with dynamic navigation system (DNS) in endodontic access cavity preparation. METHODS: The systematic review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines. Based on the structured PICO framework of "Comparative evaluation of dynamic navigation system (I) to freehand (C) and static guided endodontics (C) in endodontic access cavity preparation on the preservation of tooth structure (O) when assessed on permanent human teeth (P)", the keywords were formulated and the articles were retrieved from three databases namely PubMed, Scopus and Embase, based on the keywords from the time of inception of DNS till June 2023. The risk of bias assessment was done using a modified Joanne Briggs Institute checklist, which evaluated domains such as randomisation, sample size, image acquisition using CBCT, angulation, accuracy and time taken. As the data was heterogenous, a quantitative meta-analysis was not performed. RESULTS: Initially, 174 articles were retrieved from the three databases, 30 duplicates were removed, after title check 108 articles were excluded and following abstract check only 10 articles qualified for full text analysis. On reviewing the 10 full text articles, 5 articles were excluded and the remaining 5 articles were subjected to the risk of bias analysis which showed that 2 articles displayed low risk of bias and three articles showed high risk of bias. The RoB analysis revealed that only 2 studies evaluated the preservation of dentin in terms of accuracy, angulation and time taken proving the increased precision with minimal loss of tooth structure using DNS. In both the studies, DNS proved to be superior to free hand technique in terms of precision, accuracy and efficiency in locating the canals during access cavity preparation with maximal preservation of tooth structure. CONCLUSION: With the minimal literature evidences, the present systematic review highlights maximal preservation of dentin using DNS. However, further invitro and invivo studies comparing the free hand, static guided endodontics to DNS must be carried out for its translation into clinical practice. CLINICAL SIGNIFICANCE: Dynamic navigation system provides maximal preservation of dentin during access cavity preparation.

Clinical, Radiographic, and Histological Changes in Enamel and Dentin, According to Caries Care International™ Evaluation, In Permanent Posterior Teeth: An Observational Study / Cambios Clínicos, Radiográficos e Histológicos en Esmalte y Dentina, Según Evaluación de Caries Care International™, en Dientes Posteriores Permanentes: Un Estudio Observacional

SUMMARY: CariesCare International ™ practical guide is a tool for the comprehensive assessment and treatment of caries that synthesizes clinical and radiographic diagnosis and risk factors, classifying the severity, progression, and activity of lesions. The objective of this study was to analyze the validity and prediction characteristics of the proposed dental caries classification in the CariesCare International ™ practical guide as a reference through clinical and radiographic evaluation versus histological evaluation. Ninety-seven permanent posterior teeth were evaluated, and clinical and radiographic diagnoses were determined according to parameters defined in the CariesCare International™ guide as a reference. Subsequently, histological evaluation was performed to compare each stage of dental caries progression, and statistical analysis was applied. When comparing the validity and prediction values between radiographic and clinical diagnoses in relation to histological evaluation, a low sensitivity and high specificity relationship was found. The sensitivity and specificity percentages between the clinical and radiographic methods show that the clinical method has a lower number of false negatives. Histological changes in dental tissue were evident from the earliest stages of lesions, even in those not related to the caries process, indicating that the dentist should be careful when deciding on a treatment plan and take into account all variables involved in the caries process, as proposed by the CariesCare International ™ guide.

La guía práctica CariesCare International™ es una herramienta para la evaluación y tratamiento integral de la caries que sintetiza el diagnóstico clínico y radiográfico y los factores de riesgo, clasificando la gravedad, progresión y actividad de las lesiones. El objetivo de este estudio fue analizar la validez y características de predicción de la clasificación de caries dental propuesta en la guía práctica CariesCare International™ como referencia a través de la evaluación clínica y radiográfica versus la evaluación histológica. Se evaluaron noventa y siete dientes posteriores permanentes y se determinaron diagnósticos clínicos y radiográficos según parámetros definidos en la guía CariesCare International™ como referencia. Posteriormente se realizó una evaluación histológica para comparar cada etapa de progresión de la caries dental y se aplicó análisis estadístico. Al comparar los valores de validez y predicción entre los diagnósticos radiológicos y clínicos en relación con la evaluación histológica, se encontró una relación de baja sensibilidad y alta especificidad. Los porcentajes de sensibilidad y especificidad entre el método clínico y radiográfico muestran que el método clínico tiene un menor número de falsos negativos. Los cambios histológicos en el tejido dental fueron evidentes desde las primeras etapas de las lesiones, incluso en aquellas no relacionadas con el proceso de caries, lo que indica que el odontólogo debe tener cuidado al decidir un plan de tratamiento y tener en cuenta todas las variables involucradas en el proceso de caries, tal como propone la guía CariesCare International™.

Technical note: Micro-computed tomography calibration using dental tissue for bone mineral research.

Computed tomography (CT) and microcomputed tomography (µCT) require calibration against density phantoms scanned with specimens or during routine internal calibration for assessment of mineral concentration (MC) and density. In clinical studies involving bone, alternative calibration methods using bodily tissues and fluids ("phantomless" calibration) have been suggested. However, such tissues are seldom available in archeological and osteological research. This study investigates the potential of dental tissue as internal reference for calibration of µCT scans, facilitating the analysis of bone MC. We analyzed 70 molars from 24 extant primate species, including eight human teeth, each scanned with density phantoms for calibration. Our findings indicate that sampling specific regions of molars (lateral aspects of the mesial cusps) yields low variation in enamel and dentine MC values, averaging 1.27 g/cm3 (±0.03) for dentine and 2.25 g/cm3 (±0.03) for enamel. No significant differences were observed across molar types or among scanning procedures, including scanner model, resolution, and filters. An ad hoc test on 12 mandibles revealed low variance in MC between the conventional phantom and dental tissue calibration methods; all 36 measurements (low, medium, and high MC for each mandible) were within 0.05 g/cm3 of each other -81% were within 0.03 g/cm3 and 94% within 0.04 g/cm3. Based on these results, we propose a new "phantomless" calibration technique using these mean enamel and dentine MC values. The presented phantomless calibration method could aid in the assessment of bone pathology and enhance the scope of studies investigating bone structure and physical property variations in archeological, osteological, and laboratory-based research.

Conquering class imbalances in deep learning-based segmentation of dental radiographs with different loss functions.

OBJECTIVE: The imbalanced nature of real-world datasets is an ongoing challenge in the field of machine and deep learning. In medicine and in dentistry, most data samples represent patients not affected by pathologies, and on imagery, pathologic image areas are often smaller than healthy ones. Selecting suitable loss functions during deep learning is essential and may help to overcome the resulting imbalance. We assessed six different loss functions for one exemplary task, tooth structure segmentation on bitewing radiographs, for their performance. METHODS: Six different loss functions (Focal Loss, Dice Loss, Tversky Loss and hybrid losses of Cross-Entropy and Dice Loss, Focal and Dice Loss, Focal and Generalized Dice Loss) were compared on a tooth structure segmentation task of 1,625 bitewing radiographs. Training was performed using three different model architectures (U-Net, Linknet, DeepLavbV3+) over a 5-fold cross-validation. Tooth structures consisted of the classes (occurrence in% of samples/captures areas measured on pixel level) enamel (100 %/25 %), dentin (100 %/50 %), root canal (100 %/10 %), filling (81 %/8 %) and crown (28 %/5 %). RESULTS: Hybrid loss functions significantly outperformed standalone ones and provided robust results over the different architectures for the classes enamel, dentin, root canal and filling. Specifically, the Dice Focal loss reached high performance to conquer both image level and pixel level class imbalance, respectively. CLINICAL SIGNIFICANCE: In dental use cases it is often important to predict minority classes such as pathologies accurately. Using specific loss function may be an effective strategy to overcome data imbalance when training deep learning models.

Enhancement of mineral density and mechanical properties in root caries treated with silver diammine fluoride and glass ionomer cement, with emphasis on silver ion distribution.

OBJECTIVES: This study aimed to measure the distribution of silver ion (Ag+), mineral recovery, and nanohardness in carious lesions and comprehensively evaluate the degree of dentin restoration. METHODS: Sixty human teeth with root caries were randomly assigned to the control, silver diammine fluoride (SDF) [Safo], and SDF+Glass ionomer cement (GIC) treatment [Safo+Fuji] groups. Micro-computed tomography (micro-CT) was performed at five time points for each sample before/after treatment to evaluate mineral density within and around carious lesions. Three months following treatment, 12 samples were selected for synchrotron radiation X-ray fluorescence analysis to evaluate Ag+ distribution, while 15 samples were selected for nanoindentation. Data were analyzed using Dunnett's T3 test for micro-CT and Wilcoxon rank sum test with Bonferroni correction (p = 0.017) for nanoindentation. The correlation between hardness and mineral change was analyzed using the Spearman rank correlation coefficient. RESULTS: The Safo and Safo+Fuji groups showed significantly higher mineral recovery rates than did the control group (p < 0.001). In the Safo group, Ag+ accumulated in the deeper layers rather than the superficial layer of caries. In the Safo+Fuji group, Ag+ was found evenly distributed throughout caries, with only a few Ag+ detected in the GIC layer. Hardness in the Safo+Fuji group was significantly higher compared with the Safo group at depths in the range of 10-50 µm. CONCLUSION: In the presence of GICs, SDF exhibited high remineralization capacity when diffusing throughout carious lesions over time. Combined treatment with SDF and GIC could strengthen root dentin even in the presence of caries. CLINICAL SIGNIFICANCE: We found that combination treatment with SDF and GIC could increase mineral density in caries and improve the hardness of the tooth structure compared with fluoride-based agents alone. These findings might pave the way for future clinical trials to determine the therapeutic potential of nanotechnology-based restorative materials.

Machine learning assisted 5-part tooth segmentation method for CBCT-based dental age estimation in adults.

BACKGROUND: The utilization of segmentation method using volumetric data in adults dental age estimation (DAE) from cone-beam computed tomography (CBCT) was further expanded by using current 5-Part Tooth Segmentation (SG) method. Additionally, supervised machine learning modelling -namely support vector regression (SVR) with linear and polynomial kernel, and regression tree - was tested and compared with the multiple linear regression model. MATERIAL AND METHODS: CBCT scans from 99 patients aged between 20 to 59.99 was collected. Eighty eligible teeth including maxillary canine, lateral incisor, and central incisor were used in this study. Enamel to dentine volume ratio, pulp to dentine volume ratio, lower tooth volume ratio, and sex was utilized as independent variable to predict chronological age. RESULTS: No multicollinearity was detected in the models. The best performing model comes from maxillary lateral incisor using SVR with polynomial kernel ( = 0.73). The lowest error rate achieved by the model was given also by maxillary lateral incisor, with 4.86 years of mean average error and 6.05 years of root means squared error. However, demands a complex approach to segment the enamel volume in the crown section and a lengthier labour time of 45 minutes per tooth.

Progression of proximal caries in primary molars using the radiographic ICDAS: a retrospective cohort study.

PURPOSE: To evaluate the proximal caries progression in primary molars using the radiographic International Caries Detection and Assessment System (ICDAS). METHODS: A study was conducted on 196 children aged 3-9 years old who underwent the clinical examination and bitewing radiography during baseline and 6-month (and over) follow-up visits. The primary molars bitewing radiographs with initial enamel caries (RA1 and RA2) or outer dentine caries (RA3) of proximal surfaces were included. Caries advancement was scored using ICDAS criteria and statistical analyses with the chi-square test. Median survival time was evaluated using Kaplan-Meier survival curves and log-rank tests. RESULTS: A total of 439 surfaces of primary molars were included in this study and an averaged follow-up period of enamel and dentine caries group were 18.3 ± 9.6 months and 16.5 ± 9.5 months respectively. The progression of proximal enamel lesions significantly differed between primary maxillary and mandibular molars (p = 0.002) and among each patient's primary mandibular second molar and the others (p = 0.002). On the contrary, the outer dentine caries of each group of primary molars was not different. The median survival time of the initial enamel proximal caries (23.30 months) was non-significantly longer than that of the dentine (20.80 months). CONCLUSIONS: Progressions of the initial enamel proximal caries were significantly different among primary molars at the average 18.3-month follow-up. The median survival period of the enamel proximal caries was more extended than that of dentine but without statistical difference. These results provide essential information for dentists regarding an appropriate appointment for bitewing examinations.

Comparative evaluation and patient satisfaction with an electrical impedance-based device versus digital radiography in the estimation of remaining dentin thickness in carious posterior permanent teeth: (Diagnostic accuracy study).

BACKGROUND: Accurate assessment of remaining dentin thickness (RDT) is paramount for restorative decisions and treatment planning of vital teeth to avoid any pulpal injury. This diagnostic accuracy study compared the validity and patient satisfaction of an electrical impedance based device Prepometer™ (Hager & Werken, Duisburg, Germany) versus intraoral digital radiography for the estimation of remaining dentin thickness in carious posterior permanent teeth. METHODS: Seventy patients aged 12-25 years with carious occlusal or proximal permanent vital posterior teeth were recruited. Tooth preparation was performed to receive an adhesive restoration. Pre- and post-excavation RDT were measured radiographically by two calibrated raters using the paralleling periapical technique. Prepometer™ measurements were performed by the operator. Patients rated their satisfaction level with each tool on a 4-point Likert scale and 100 mm visual analog scale (VAS). Inter and intragroup comparisons were analyzed using signed rank test, while agreement between devices and observations was tested using weight kappa (WK) coefficient. RESULTS: the intergroup comparisons showed that, before and after excavation, there was a significant difference between measurements made by both techniques (p < 0.001). After excavation, there was a weak agreement between measurements (WK = 0.2, p < 0.001), whereas before excavation, the agreement was not statistically significant (p = 0.407). Patients were significantly more satisfied with Prepometer™ based on scales and VAS (p < 0.001). CONCLUSION: Prepometer™ could be a viable clinical tool for determining RDT with high patient satisfaction, while radiographs tended to overestimate RDT in relation to the Prepometer™.

Natural canal deviation and dentin thickness of mesial root canals of mandibular first molars assessed by microcomputed tomography.

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Microcomputed tomographic evaluation of 6 NiTi files on the pericervical dentin and the smallest dentin thickness zones in mesial root canals of mandibular molars: an in vitro study.

OBJECTIVE: The aim of this study was to evaluate six files on the pericervical dentin (PCD) and the smallest dentin thickness zones (SDTZ) in mesial root canals of mandibular molars. MATERIALS AND METHODS: Sixty mandibular molars with two mesial canals and Vertucci configuration were aleatory allocated in 6 experimental groups of 10 molars and 20 root canals. Specimens were scanned before instrumentation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WaveOne Gold (WG), group 2 with Reciproc Blue (RB), group 3 with TRUShape (TS), group 4 with XP-endo Shaper (XP), group 5 with iRace (IR), and group 6 with TruNatomy (TN). After instrumentation, the molars were scanned again and the images recorded were reconstructed with the NRecon v.1.7 (Bruker micro-CT) and analyzed with CTAn v.1.20.8 software (Bruker micro-CT) quantifying the changes produced in the surface, volume, structure thickness, SMI, and centroids at the Pericervical Dentin area of the root canals (PCD) located from the root canal orifices at the floor of the pulp chamber to 4 mm in the apical direction, and the changes in the Smallest Dentin Thickness Zones (SDTZ) located (from the furcation to 4 mm and 7 mm in the apical direction. The data obtained were compared using Wilcoxon and ANOVA with a 5% significance level. RESULTS: XP and TN were similar in all the parameters (P >.05) at the PCD, but TN showed significant differences from WG, RB, TS, and IR (P <.05), while XP showed significant differences from WG (P <.05) in volume, surface, and structure thickness. Regarding the changes in the SDTZ, the amount of dentin removed was similar between the groups in both canals at the middle 1/3, at the cervical 1/3 for MB canals, and in ML canals for RB, TS, XP, IR, and TN (P>.05). The action of WG was significantly different from that of XP and TN in the cervical 1/3 of the ML canal (P <.05). CONCLUSIONS: XP and TN rotatory files with small taper and volume maintained better with minor changes at the PCD and SDTZ, while WG reciprocation file produced the largest change. All the files were maintained centered at the PCD, and their performances were safe with a minimal thickness higher 0.5 mm at the SDTZ, and without risk of perforation. TRIAL REGISTRATION: No clinical trials were indicated in this study. CLINICAL RELEVANCE: The choice of endodontic files is a relevant factor in the conservative performance of root canal treatments.

Pericervical Dentin Metrics in Mandibular First Molars Determined with Digital Periapical Radiography and Cone-beam Computed Tomography.

INTRODUCTION: Pericervical root dentin is decisive for the long-term mechanical integrity of root-filled teeth. Current treatment protocol does not include a customized step to determine the pretreatment residual pericervical root dentin. OBJECTIVE: To determine and compare the residual root dentin and canal width using digital periapical radiography (DPR) and cone-beam computed tomography (CBCT) at the apical limit of the pericervical area (PCA) in mandibular first molars. METHODS: DPR and CBCT images of 60 patients with age between 22 and 76 years were used to determine (a) the mesiodistal widths of the root canal (pericervical dimensions [PCL]-C) and the root (PCL-R) of mandibular first molars at the apical limit of the PCA and (b) the intracanal distance from the apical limit of the PCA to the radiographic apex (intracanal distance [ICD]). The correlation between the PCL and ICD measurements obtained from DPR and CBCT were evaluated. RESULTS: Values between 0.10-0.80 mm and 0.00-1.10 mm were obtained for PCL-C using DPR and CBCT respectively (95% CI). The PCL values between 0.90-2.30 mm and 0.00-2.30 mm were obtained from DPR and CBCT respectively (95% CI). The ICD ranged between 4.6-12.3 mm in DPR and 4.40-12.0 mm in CBCT (95% CI). The comparative analysis showed differences from -0.9 to 0.5 mms for PCL and -2.00 to 1.5 mms for ICD between DPR and CBCT techniques respectively. CONCLUSION: The PCL and ICD determined from DPR and CBCT provided the pericervical dentin metrics that could be utilized clinically as a guideline for decision-making in endodontic treatment.

Mechanism of dentin hardness measurements using a dentin hardness measuring device with a light-emitting diode.

Significance: Managing caries is imperative in a rapidly aging society. Current diagnoses use qualitative indices. However, a quantitative evaluation of hardness in a clinical setting may lead to more accurate diagnoses. Previously, hardness meter using indenter with light for tooth monitoring (HAMILTOM) was developed to quantitatively measure tooth hardness. Herein, the physical interpretation of dentin hardness measured using HAMILTOM and the dentin hardness measurement mechanism are discussed. Aim: This study evaluates the mechanism of dentin hardness measurements using HAMILTOM physically and compare the invasiveness to dentin by HAMILTOM with those using a dental probe for palpation. Approach: Eleven bovine dentin samples were used to create caries models. HAMILTOM measured the dark areas, and its indentations were observed using scanning electron microscopy. Also, its invasiveness was evaluated by comparing the results with those from dental probe palpation. Results: The indentation areas were smaller than the dark areas in HAMILTOM, which may be due to exuded water from the dentin sample and the elastic recovery of dentin sample. Additionally, the dental probe indentation was deeper than the HAMILTOM indentations. Conclusions: The results demonstrate that the indentation areas were smaller than the dark areas measured by HAMILTOM, which might contain the influence of exuded water and the deformation of dentin sample. Also, HAMILTOM is less invasive than dental probe palpation. In the future, HAMILTOM may become a standard hardness measuring method to diagnose root caries.

The Impact of Coronal Flaring Files on Pericervical Dentin Thickness in Mandibular Molars.

INTRODUCTION: This study aimed to assess the influence of different coronal flaring files on dentin removal in mandibular teeth using cone-beam computed tomographic (CBCT) images. METHODS: CBCT images of 48 mandibular molar teeth were acquired and randomly divided into 2 main groups, with each main group further divided into 3 subgroups. In the first main group, root canal preparation was performed using TruNatomy (Dentsply Sirona, Ballaigues, Switzerland), ProTaper Gold (Dentsply Sirona), and One Curve (Micro-Mega, Besancon, France) files without the use of coronal flaring files. In the second main group, root canal preparation was performed using the same files with the use of coronal flaring files. After the completion of root canal preparation, a second set of CBCT images was obtained. Subsequently, the dentin removal and remaining critical dentin were assessed by measuring at 4 distinct points below the furcation level. Data were compared between groups using the Mann-Whitney U and Kruskal-Wallis tests with alpha set at 5%. RESULTS: The ProTaper Gold files demonstrated higher dentin removal compared with the TruNatomy files. In the no-flaring groups, the One Curve files exhibited greater dentin removal than the TruNatomy files at specific levels. The use of coronal flaring files generally did not significantly impact dentin removal, except for certain cases in the TruNatomy and ProTaper Gold groups. CONCLUSIONS: The TruNatomy instrument group was more effective in preserving pericervical dentin compared with the other instrument groups. Coronal flaring files can be confidently used to preserve critical dentin during root canal treatment.

The impact of long-term storage conditions on the development of experimental dentinal microcracks.

This study evaluated the impact of long-term storage conditions (medium and time) on the development of experimental dentinal microcracks through micro-computed tomography. Sixty freshly extracted premolars were stored in formalin, water, or dry conditions (n = 20) and scanned after 72 h, 30 days, 6 months and 3 years of extraction. The effect of the storage medium and time on the occurrence of dentinal defects was statistically evaluated. A total of 211 000 images were screened revealing the existence of 11 519 slices with dentinal defects. Dry conditions significantly contributed to the development of new defects in all time points. During the 3-year follow-up period, no new defects were detected in the teeth that were stored in water and, in a single tooth, in the formalin group, after 6 months of storage.

Effect of Three Chemical Agents on Stain Removal from Dentin Caries Lesions Treated with Silver Diamine Fluoride.

INTRODUCTION: This in vitro study aimed to evaluate the effect of three different chemical agents on stain removal and mineral uptake of artificial dentin caries (ADC) lesions treated with silver diamine fluoride (SDF). METHODS: Baseline L*a*b* values were determined in polished human permanent dentin blocks, and ADC lesions were induced with an acid gel for 1 week. Samples were assigned to four groups; in three groups, half of each sample received SDF (30% SDF for 3 min), while the other half received SDF followed by a bleaching treatment protocol (garlic extract, bentonite, or 35% hydrogen peroxide). The fourth group had one SDF-treated half and one half without SDF. Color changes (ΔE) were measured by spectrometry, and transversal microradiography was used to quantify integrated mineral loss (ΔZ) 24 h after treatment (SDF or SDF + bleaching). A two-way mixed ANOVA was applied to thirty percent. RESULTS: SDF application increased mineral uptake by ADC (p = 0.001). The type of chemical agent evaluated (p < 0.0001), time (p = 0.01), and their interaction (p < 0.0001) bleached the ADC treated with SDF. However, 35% hydrogen peroxide was the only compound with a bleaching effect (p < 0.001), without returning to baseline color. None of the compounds altered the mineral uptake effect of SDF (p = 0.30). CONCLUSION: This in vitro study showed mineral uptake effect in ACD within 24 h after SDF application and the ability of hydrogen peroxide to partially remove (reduction of 24%) the staining caused by SDF without affecting its mineral uptake effect.

Sensitivity and specificity of the ICDAS II system and bitewing radiographs for detecting occlusal caries using the Spectra™ caries detection system as the reference test in children.

BACKGROUND: Most studies assessing the sensitivity and specificity of caries detection methods have been performed in vitro using the histological method as the gold standard showing inconsistent values. The aim of this study was to compare the sensitivity and specificity in detecting occlusal caries using the International Caries Detection and Assessment System (ICDAS II) with the radiographic method (RM), while using the Spectra™ Caries Detection System (SCDS) as the reference test. METHODS: One hundred sixty children, ages 7-12 years, participated in the study. Five zones in the occlusal surfaces of 859 primary and 632 first permanent molars were examined visually using ICDAS-II, the RM using bitewing radiographs and SCDS. The descriptive statistics of sensitivity and specificity were calculated and compared. RESULTS: For all molars combined and for primary molars only, the sensitivity of ICDAS II was higher for detecting total caries (p < 0.001), caries in enamel (p < 0.001), and caries in dentin (p = 0.016), but it was not different for detecting caries in the dentin of permanent first molars (p = 0.214), and primary second molars (p = 0.761). The specificity of RM was higher for detecting total caries, caries in enamel for all molars combined and for permanent first molars (p < 0.001). For caries in dentin, the specificity of ICDAS II was higher for all molars combined and for primary molars only (p < 0.001). For total caries in primary molars only, and caries in dentin of permanent first molars only, the specificity was not different (p = 0.156 and p = 0.181 respectively). CONCLUSIONS: The sensitivity and specificity of ICDAS II and RM changes depending on whether the carious lesion compromises the enamel or dentin, and if the caries detection is performed in the primary molars or permanent first molars.