Affinity-Driven Aryl Diazonium Labeling of Peptide Receptors on Living Cells.

Peptide-receptor interactions play critical roles in a wide variety of physiological processes. Methods to link bioactive peptides covalently to unmodified receptors on the surfaces of living cells are valuable for studying receptor signaling, dynamics, and trafficking and for identifying novel peptide-receptor interactions. Here, we utilize peptide analogues bearing deactivated aryl diazonium groups for the affinity-driven labeling of unmodified receptors. We demonstrate that aryl diazonium-bearing peptide analogues can covalently label receptors on the surface of living cells using both the neurotensin and the glucagon-like peptide 1 receptor systems. Receptor labeling occurs in the complex environment of the cell surface in a sequence-specific manner. We further demonstrate the utility of this covalent labeling approach for the visualization of peptide receptors by confocal fluorescence microscopy and for the enrichment and identification of labeled receptors by mass spectrometry-based proteomics. Aryl diazonium-based affinity-driven receptor labeling is attractive due to the high abundance of tyrosine and histidine residues susceptible to azo coupling in the peptide binding sites of receptors, the ease of incorporation of aryl diazonium groups into peptides, and the relatively small size of the aryl diazonium group. This approach should prove to be a powerful and relatively general method to study peptide-receptor interactions in cellular contexts.

Diazo-functionalised immunoelectrochemical sensor for the detection of ochratoxin a in foods.

Ochratoxin A (OTA) is a toxic fungal metabolite that is commonly found in cereals and animal feed. It is economically damaging and potentially hazardous to human health. Herein, we propose an electrochemical immunosensor for the rapid detection of OTA using anti-OTA antibodies and diazonium-functionalized, screen-printed electrodes. We attached 4-aminobenzoic acid to an electrode surface, activated the carboxyl groups on the surface with carbodiimide, and attached an antibody to the diazo layer. Subsequently, we used bovine serum protein as a blocker to prevent non-specific antigens from binding to the antibody. We evaluated the performance of the sensor by cyclic voltammetry, electrochemical impedance spectroscopy, and differential pulse voltammetry. The sensor is highly specific and sensitive, has good linear responses in the range 20-200 ng/mL, a limit of detection of 0.5 ng/mL, and good recoveries of 90.5%-100.9% in spiked samples. It can be stored at 4 °C for approximately 2 weeks, and is highly stable, with a current response variation of no more than 4.6%.

A triple-diazonium reagent for virus crosslinking and the synthesis of an azo-linked molecular cage.

The first bench-stable triple-diazonium reagent (TDA-1) was rationally designed and synthesized for coupling and crosslinking. The three reactive sites of TDA-1 can react with phenol-containing molecules as well as plant viruses in aqueous buffers efficiently. In addition, a new-type azo-linked cage was constructed by the direct reaction of TDA-1 with a triple-phenol molecule and was characterized by X-ray crystallography.

Electro-polymerization rates of diazonium salts are dependent on the crystal orientation of the surface.

Electro-polymerization of diazonium salts is widely used for modifying surfaces with thin organic films. Initially this method was primarily applied to carbon, then to metals, and more recently to semiconducting Si. Unlike on other surfaces, electrochemical reduction of diazonium salts on Si, which is one of the most industrially dominant material, is not well understood. Here, we report the electrochemical reduction of diazonium salts on a range of silicon electrodes of different crystal orientations (111, 211, 311, 411, and 100). We show that the kinetics of surface reaction and the reduction potential is Si crystal-facet dependent and is more favorable in the hierarchical order (111) > (211) > (311) > (411) > (100), a finding that offers control over the surface chemistry of diazonium salts on Si. The dependence of the surface reaction kinetics on the crystal orientation was found to be directly related to differences in the potential of zero charge (PZC) of each crystal orientation, which in turn controls the adsorption of the diazonium cations prior to reduction. Another consequence of the effect of PZC on the adsorption of diazonium cations, is that molecules terminated by distal diazonium moieties form a compact film in less time and requires less reduction potentials compared to that formed from diazonium molecules terminated by only one diazo moiety. In addition, at higher concentrations of diazonium cations, the mechanism of electrochemical polymerization on the surface becomes PZC-controlled adsorption-dominated inner-sphere electron transfer while at lower concentrations, diffusion-based outer-sphere electron transfer dominates. These findings help understanding the electro-polymerization reaction of diazonium salts on Si en route towards an integrated molecular and Si electronics technology.

A Straightforward Approach to Fluorinated Pyrimido[1,2-b]indazole Derivatives via Metal/Additive-Free Annulation with Enaminones, 3-Aminoindazoles, and Selectfluor.

A novel and efficient three-component reaction with two C-N bonds and one C-F bond formation has been reported, which provides a straightforward route to a variety of fluorinated pyrimido[1,2-b]indazole derivatives. This transformation has the advantage of excellent functional group compatibility, including aliphatic and aromatic substituents enaminones. Moreover, metal and additives are not necessary for this reaction, which is of great significance for the synthesis and application of fluorinated heterocycles.

Biosynthesis of Tasikamides via Pathway Coupling and Diazonium-Mediated Hydrazone Formation.

Naturally occurring hydrazones are rare despite the ubiquitous usage of synthetic hydrazones in the preparation of organic compounds and functional materials. In this study, we discovered a family of novel microbial metabolites (tasikamides) that share a unique cyclic pentapeptide scaffold. Surprisingly, tasikamides A-C (1-3) contain a hydrazone group (C═N─N) that joins the cyclic peptide scaffold to an alkyl 5-hydroxylanthranilate (AHA) moiety. We discovered that the biosynthesis of 1-3 requires two discrete gene clusters, with one encoding a nonribosomal peptide synthetase (NRPS) pathway for assembling the cyclic peptide scaffold and another encoding the AHA-synthesizing pathway. The AHA gene cluster encodes three ancillary enzymes that catalyze the diazotization of AHA to yield an aryl diazonium species (diazo-AHA). The electrophilic diazo-AHA undergoes nonenzymatic Japp-Klingemann coupling with a ß-keto aldehyde-containing cyclic peptide precursor to furnish the hydrazone group and yield 1-3. The studies together unraveled a novel mechanism whereby specialized metabolites are formed by the coupling of two biosynthetic pathways via an unprecedented in vivo Japp-Klingemann reaction. The findings raise the prospect of exploiting the arylamine-diazotizing enzymes (AAD) for the in vivo synthesis of aryl compounds and modification of biological macromolecules.

Metalloradical Activation of In Situ-Generated α-Alkynyldiazomethanes for Asymmetric Radical Cyclopropanation of Alkenes.

α-Alkynyldiazomethanes, generated in situ from the corresponding sulfonyl hydrazones in the presence of a base, can serve as effective metalloradicophiles in Co(II)-based metalloradical catalysis (MRC) for asymmetric cyclopropanation of alkenes. With D2-symmetric chiral amidoporphyrin 2,6-DiMeO-QingPhyrin as the optimal supporting ligand, the Co(II)-based metalloradical system can efficiently activate different α-alkynyldiazomethanes at room temperature for highly asymmetric cyclopropanation of a broad range of alkenes. This catalytic radical process provides a general synthetic tool for stereoselective construction of alkynyl cyclopropanes in high yields with high both diastereoselectivity and enantioselectivity. Combined computational and experimental studies offer several lines of evidence in support of the underlying stepwise radical mechanism for the Co(II)-catalyzed olefin cyclopropanation involving a unique α-metalloradical intermediate that is associated with two resonance forms of α-Co(III)-propargyl radical and γ-Co(III)-allenyl radical. The resulting enantioenriched alkynyl cyclopropanes, as showcased with several stereospecific transformations, may serve as valuable chiral building blocks for stereoselective organic synthesis.

Synthesis and grafting of diazonium tosylates for thermoplastic electrode immunosensors.

For electrochemical immunosensors, inexpensive electrodes with fast redox kinetics, and simple stable methods of electrode functionalization are vital. However, many inexpensive and easy to fabricate electrodes suffer from poor redox kinetics, and functionalization can often be difficult and/or unstable. Diazonium tosylates are particularly stable soluble salts that can be useful for electrode functionalization. Recently developed thermoplastic electrodes (TPEs) have been inexpensive, moldable, and highly electroactive carbon composite materials. Herein, the synthesis and grafting of diazonium tosylate salts were optimized for modification of TPEs and used to develop the first TPE immunosensors. With diazonium tosylates, TPEs were amine functionalized either directly through grafting of p-aminophenyl diazonium salt or indirectly through grafting p-nitrophenyl diazonium salt followed by electrochemical reduction to an amine. Diazonium tosylates were synthesized in situ as a paste in 6 min. Once the reaction paste was spread over the electrodes, near monolayer coverage (1.0 ± 0.2 nmol cm-2) was achieved for p-nitrophenyl diazonium salt within 5 min. Amine functionalized electrodes were conjugated to C-reactive protein (CRP) antibodies. Antibody-modified TPEs were applied for the sensitive detection of CRP, a biomarker of cardiovascular disease using electrochemical enzyme-linked immunosorbent assays (ELISA). LODs were determined to be 2 ng mL-1 in buffer, with high selectivity against interfering species for both functionalization methods. The direct p-aminophenyl modification method had the highest sensitivity to CRP and was further tested in spiked serum with an LOD of 10 ng mL-1. This low-cost and robust TPE immunosensor platform can be easily adapted for other analytes and multiplexed detection.

Intramolecular amination via acid-catalyzed rearrangement of azides: a potent alternative to intermolecular direct electrophilic route.

Although acid-catalyzed intramolecular rearrangement of organic azides is an attractive route to amines, its mechanism and synthetic prospective are still debated. Herein, through computational and experimental studies, we demonstrated that azide intramolecular rearrangement could serve as a potent synthetic route to a sought-after amine functionality including preparation of difficult to access and valuable heterocyclic amines. Using quantum chemical calculations at MP2/aug-cc-pVTZ and B3LYP/aug-cc-pVDZ levels, we discovered that this reaction proceeds via a concerted transition state with nitrogen elimination and alkyl/aryl migration occurring at the same time. Two conformers of protonated azides - syn- and anti- - were shown to precede corresponding transition states. It was shown that the reaction follows Curtin-Hammett scenario as the energy gap required for conformer interconversion was substantially lower than activation barrier of either transition state. Intramolecular amination via azide rearrangement was predicted to be a selective process with migratory aptitude increasing in a row alkyl

Novel N-transfer reagent for converting α-amino acid derivatives to α-diazo compounds.

A novel universal N-transfer reagent for direct and effective transformation of α-amino ketones, acetamides, and esters to the corresponding α-diazo products under mild basic conditions has been developed. This one-step synthetic approach not only allows for generation of α-substituted-α-diazo carbonyl compounds from α-amino acid derivatives but also permits preparation of α-diazo dipeptides from N-terminal dipeptides (32 examples, up to 91%).

Labeling Preferences of Diazirines with Protein Biomolecules.

Diazirines are widely used in photoaffinity labeling (PAL) to trap noncovalent interactions with biomolecules. However, design and interpretation of PAL experiments is challenging without a molecular understanding of the reactivity of diazirines with protein biomolecules. Herein, we report a systematic evaluation of the labeling preferences of alkyl and aryl diazirines with individual amino acids, single proteins, and in the whole cell proteome. We find that alkyl diazirines exhibit preferential labeling of acidic amino acids in a pH-dependent manner that is characteristic of a reactive alkyl diazo intermediate, while the aryl-fluorodiazirine labeling pattern reflects reaction primarily through a carbene intermediate. From a survey of 32 alkyl diazirine probes, we use this reactivity profile to rationalize why alkyl diazirine probes preferentially enrich highly acidic proteins or those embedded in membranes and why probes with a net positive charge tend to produce higher labeling yields in cells and in vitro. These results indicate that alkyl diazirines are an especially effective chemistry for surveying the membrane proteome and will facilitate design and interpretation of biomolecular labeling experiments with diazirines.

Alkyne Trifunctionalization via Divergent Gold Catalysis: Combining π-Acid Activation, Vinyl-Gold Addition, and Redox Catalysis.

Here we report the first example of alkyne trifunctionalization through simultaneous construction of C-C, C-O, and C-N bonds via gold catalysis. With the assistance of a γ-keto directing group, sequential gold-catalyzed alkyne hydration, vinyl-gold nucleophilic addition, and gold(III) reductive elimination were achieved in one pot. Diazonium salts were identified as both electrophiles (N source) and oxidants (C source). Vinyl-gold(III) intermediates were revealed as effective nucleophiles toward diazonium, facilitating nucleophilic addition and reductive elimination with high efficiency. The rather comprehensive reaction sequence was achieved with excellent yields (up to 95%) and broad scope (>50 examples) under mild conditions (room temperature or 40 °C).

Suzuki Coupling of Protected Aryl Diazonium Ions: Expanding the Knowledge of Triazabutadiene Compatible Reactions.

Aryl diazonium ions are important in synthesis and chemical biology, and the acid-labile triazabutadiene can protect this handle for future use. We report a Suzuki coupling strategy that is compatible with the triazabutadiene scaffold, expanding the scope of synthetically available triazabutadienes. Shown herein, the triazabutadiene scaffold remains intact and reactive after coupling, as demonstrated by releasing the aryl diazonium ion to label a tyrosine-rich model protein.

Tailoring the performance of electrochemical biosensors based on carbon nanomaterials via aryldiazonium electrografting.

Carbon nanomaterials (CNs) offer some of the most valuable properties for electrochemical biosensing applications, such as good electrical conductivity, wide electrochemical stability, high specific surface area, and biocompatibility. Regardless the envisioned sensing application, endowing CNs with specific functions through controlled chemical functionalization is fundamental for promoting the specific binding of the analyte. As a versatile and straightforward method of surface functionalization, aryldiazonium chemistry have been successfully used to accommodate in a stable and reproducible way different functionalities, while the electrochemical route has become the favourite choice since the deposition conditions can be readily controlled and adapted to the substrate. In particular, the modification of CNs by electrochemical reduction of aryl diazonium salts is established as a powerful tool which allows tailoring the chemical and electronic properties of the sensing platform. By outlining the stimulating results disclosed in the last years, this article provides not only a comprehensively review, but also a rational assessment on contribution of aryldiazonium electrografting in developing CNs-based electrochemical biosensors. Furthermore, some of the emerging challenges to be surpassed to effectively implement this methodology for in vivo and point of care analysis are also highlighted.

Development of a label-free electrochemical aptasensor based on diazonium electrodeposition: Application to cadmium detection in water.

In this study we have developed a new aptasensor for cadmium (Cd2+) detection in water. Gold electrode surface has been chemically modified by electrochemical reduction of diazonium salt (CMA) with carboxylic acid outward from the surface. This was used for amino-modified cadmium aptamer immobilization through carbodiimide reaction. Chemical surface modification was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). This latter was also used for Cd2+ detection. The aptasensor has exhibited a good linear relationship between the logarithm of the Cd2+ concentration and the impedance changes in the range from 10-3 to 10-9 M with a correlation R2 of 0.9954. A high sensitivity was obtained with a low limit of detection (LOD) of 2.75*10-10 M. Moreover, the developed aptasensor showed a high selectivity towards Cd2+ when compared to other interferences such as Hg2+, Pb2+ and Zn2+. The developed aptasensor presents a simple and sensitive approach for Cd2+detection in aqueous solutions with application for trace Cd2+ detection in spring water samples.

Azido-functionalized gelatin via direct conversion of lysine amino groups by diazo transfer as a building block for biofunctional hydrogels.

Gelatin is one of the most prominent biopolymers in biomedical material research and development. It is frequently used in hybrid hydrogels, which combine the advantageous properties of bio-based and synthetic polymers. To prevent the biological component from leaching out of the hydrogel, the biomolecules can be equipped with azides. Those groups can be used to immobilize gelatin covalently in hydrogels by the highly selective and specific azide-alkyne cycloaddition. In this contribution, we functionalized gelatin with azides at its lysine residues by diazo transfer, which offers the great advantage of only minimal side-chain extension. Approximately 84-90% of the amino groups are modified as shown by 1 H-NMR spectroscopy, 2,4,6-trinitrobenzenesulfonic acid assay as well as Fourier-transform infrared spectroscopy, rheology, and the determination of the isoelectric point. Furthermore, the azido-functional gelatin is incorporated into hydrogels based on poly(ethylene glycol) diacrylate (PEG-DA) at different concentrations (0.6, 3.0, and 5.5%). All hydrogels were classified as noncyctotoxic with significantly enhanced cell adhesion of human fibroblasts on their surfaces compared to pure PEG-DA hydrogels. Thus, the new gelatin derivative is found to be a very promising building block for tailoring the bioactivity of materials.

Probing the Mechanism of Photoaffinity Labeling by Dialkyldiazirines through Bioorthogonal Capture of Diazoalkanes.

Dialkyldiazirines have emerged as reagents of choice for biological photoaffinity labeling studies. The mechanism of crosslinking has dramatic consequences for biological applications where instantaneous labeling is desirable, as carbene insertions display different chemoselectivity and are much faster than competing mechanisms involving diazo or ylide intermediates. Here, deuterium labeling and diazo compound trapping experiments are employed to demonstrate that both carbene and diazo mechanisms operate in the reactions of a dialkyldiazirine motif that is commonly utilized for biological applications. For the fraction of intermolecular labeling that does involve a carbene mechanism, direct insertion is not necessarily involved, as products derived from a carbonyl ylide are also observed. We demonstrate that a strained cycloalkyne can intercept diazo compound intermediates and serve as a bioorthogonal probe for studying the contribution of the diazonium mechanism of photoaffinity labeling on a model protein under aqueous conditions.

Systematic evaluation of the Folin-Ciocalteu and Fast Blue BB reactions during the analysis of total phenolics in legumes, nuts and plant seeds.

Folin-Ciocalteu and the more recent Fast Blue BB (FBBB) reactions are used for the quantification of total phenolics in food matrices. Despite its known interferences, Folin-Ciocalteu is still widely employed, considering Solid Phase Extraction (SPE) as clean-up step only in a few cases. Meanwhile, FBBB has shown no interferences for the determination of total phenolics in fruits and cereals, although its utilization in other popular matrices containing potential interferences, such as legumes, remains unexplored. In this study, the total phenolic content of 24 flours from legumes, cereals, fruits, nuts and plant seeds was evaluated by Folin-Ciocalteu and FBBB, with and without SPE. Folin-Ciocalteu showed interferences for 75% of the flours (attributed to reducing sugars and enediols), whereas FBBB only for legumes and nuts (attributed to the presence of tyrosine), both methods in those matrices requiring SPE. Although both SPE-FBBB and SPE-Folin-Ciocalteu presented excellent reproducibility, SPE-FBBB displayed 1.5 times higher sensitivity.

Different Electrochemical Sensor Designs Based on Diazonium Salts and Gold Nanoparticles for Pico Molar Detection of Metals.

We report a comparison of sensors' performance of different hybrid nanomaterial architectures modifying an indium tin oxide (ITO) electrode surface. Diazonium salts and gold nanoparticles (AuNPs) were used as building units to design hybrid thin films of successive layers on the ITO electrode surface. Different architectures of hybrid thin films were prepared and characterized with different techniques, such as TEM, FEG-SEM, XPS, and EIS. The prepared electrodes were used to fabricate sensors for heavy metal detection and their performances were investigated using the square wave voltammetry (SWV) method. The comparison of the obtained results shows that the deposition of AuNPs on the ITO surface, and their subsequent functionalization by diazonium salt, is the best performing architecture achieving a high sensitivity in terms of the lower detection limit of pico molar.

In Situ FTIR Spectroscopic Monitoring of the Formation of the Arene Diazonium Salts and its Applications to the Heck-Matsuda Reaction.

This study depicts the use of a fiber-optic coupled Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) probe for the in-depth study of arene diazonium salt formation and their utilization in the Heck-Matsuda reaction. The combination of these chemical reactions and in situ IR spectroscopy enabled us to recognize the optimum parameters for arene diazonium salt formation and to track the concentrations of reactants, products and intermediates under actual reaction conditions without time consuming HPLC analysis and the necessity of collecting the sample amid the reaction. Overall advantages of the proposed methodology include precise reaction times as well as identification of keto enol tautomerization in allylic alcohols supporting the 'path a' elimination mechanism in the Heck-Matsuda reaction.