Formulation and evaluation of miconazole lipogel for enhanced drug permeation.

Hydrophilic drugs could be incorporated into the skin surface by manes of Lipogel. This study aimed to prepare miconazole lipogel with natural ingredients to enhance drug permeability using dimethyl Sulfoxide (DMSO). The miconazole lipogels, A1 (without DMSO) and A2 (with DMSO) were formulated and evaluated for organoleptic evaluation, pH, viscosity, stability studies, freeze-thawing, drug release profile and drug permeation enhancement. Results had stated that prepared lipogel's pH falls within the acceptable range required for topical delivery (4 to 6) while both formulations show good results in organoleptic evaluation. The A2 formulation containing DMSO shows better permeation of miconazole (84.76%) on the artificial skin membrane as compared to A1 lipogel formulation (50.64%). In in-vitro drug release studies, A2 for-mulation showed 87.48% drug release while A1 showed just 60.1% drug release from lipogel. Stability studies were performed on model formulations under environmental conditions and both showed good spreadibility, stable pH, free of grittiness and good consistency in formulation. The results concluded that A2 formulation containing DMSO shows better results as compared to DMSO-free drug lipogel.

Picoplatin binding to proteins: X-ray structures and mass spectrometry data on the adducts with lysozyme and ribonuclease A.

The reactivity of the anticancer drug picoplatin (cis-amminedichlorido(2-methylpyridine)platinum(II) complex) with the model proteins hen egg white lysozyme (HEWL) and bovine pancreatic ribonuclease (RNase A) was investigated by electrospray ionisation mass spectrometry (ESI MS) and X-ray crystallography. The data were compared with those previously obtained for the adducts of these proteins with cisplatin, carboplatin and oxaliplatin under the same experimental conditions. ESI-MS data show binding of Pt to both proteins, with fragments retaining the 2-methylpyridine ligand and, possibly, a chloride ion. X-ray crystallography identifies different binding sites on the two proteins, highlighting a different behaviour of picoplatin in the absence or presence of dimethyl sulfoxide (DMSO). Metal-containing fragments bind to HEWL close to the side chains of His15, Asp18, Asp119 and both Lys1 and Glu7, whereas they bind to RNase A on the side chain of His12, Met29, His48, Asp53, Met79, His105 and His119. The data suggest that the presence of DMSO favours the loss of 2-methylpyridine and alters the ability of the Pt compound to bind to the two proteins. With both proteins, picoplatin appears to behave similarly to cisplatin and carboplatin when dissolved in DMSO, whereas it behaves more like oxaliplatin in the absence of the coordinating solvent. This study provides important insights into the pharmacological profile of picoplatin and supports the conclusion that coordinating solvents should not be used to evaluate the biological activities of Pt-based drugs.

Cell Damage Mechanisms during Cryopreservation in a Zwitterion Solution and Its Alleviation by DMSO.

Recently, zwitterions have been proposed as novel cryoprotectants. However, some cells are difficult to cryopreserve using aqueous zwitterion solutions alone. We investigated here the reason for cell damage in such cells, and it was the osmotic pressure after freeze concentration. Furthermore, the addition of dimethyl sulfoxide (DMSO) has been reported to improve the cryoprotective effect in such cells: the zwitterion/DMSO aqueous solution shows a higher cryoprotective effect than the commercial cryoprotectant. This study also clarified the mechanisms underlying the improvement in a cryoprotective effect. The addition of cell-permeable DMSO alleviated the osmotic pressure after the freeze concentration. This alleviation was also found to be a key factor for cryopreserving cell spheroids, while there has been no insight into this phenomenon.

Dimethyl sulfoxide as a gas phase charge-reducing agent for the determination of PEGylated proteins' intact mass.

Determination of PEGylated proteins' intact mass by mass spectrometry is challenging due to the molecules' large size, excessive charges, and instrument limitations. Previous efforts have been reported. However, signal variability, ion coalescence, and a generally low degree of robustness have been observed. In this work, we have explored the capabilities of post-column infusion of dimethyl sulfoxide (DMSO) following reversed-phase liquid chromatography-mass spectrometry (RP-LCMS) to determine PEG-filgrastim' intact mass, and to characterize its PEG moiety. The method was optimized around reproducibility (six preparations, and three injection replicates) with an in-house prepared PEG-filgrastim standard. The method showed a mass accuracy of ≤1.2 Da. The average molecular weight (MWEO=483) was 40 147.9 Da. The number average molecular weight (Mn) and the weight average molecular weight (Mw) were observed to be 40 101.1 and 40 113.9 Da, respectively, both with an RSD of 0.03%. The molecular weight distribution of ethylene oxide (EO), the polydispersity index (PDI), was 1.0003 for all preparations with a minimum and maximum number of EO units of 448 ± 2 and 516 ± 2, respectively. The method was finally applied to commercially available Neulasta® lots where the Mn and Mw were 39 995.8 and 40 008.8 Da, respectively, both with an RSD of 0.1%. The minimum and maximum EO units across the lots were observed to be 444.5 ± 1.5 and 514 ± 3, respectively. The PDI for all Neulasta® lots was 1.0003. This study provides an insightful characterization of Neulasta® and describes a robust LC-MS methodology for the characterization of the PEGylated proteins.

Liver glycogen fragility in the presence of hydrogen-bond breakers.

Glycogen, a complex branched glucose polymer, is responsible for sugar storage in blood glucose homeostasis. It comprises small ß particles bound together into composite α particles. In diabetic livers, α particles are fragile, breaking apart into smaller particles in dimethyl sulfoxide, DMSO; they are however stable in glycogen from healthy animals. We postulate that the bond between ß particles in α particles involves hydrogen bonding. Liver-glycogen fragility in normal and db/db mice (an animal model for diabetes) is compared using various hydrogen-bond breakers (DMSO, guanidine and urea) at different temperatures. The results showed different degrees of α-particle disruption. Disrupted glycogen showed changes in the mid-infra-red spectrum that are related to hydrogen bonds. While glycogen α-particles are only fragile under harsh, non-physiological conditions, these results nevertheless imply that the bonding between ß particles in α particles is different in diabetic livers compared to healthy, and is probably associated with hydrogen bonding.

The crucial role of stability of intercalating agent for DNA binding studies in DMSO/water system.

In recent years, extensive research has been directed towards understanding the interactions between various zinc complexes with DNA, specifically delving into their intercalation and binding behaviors. The binding of zinc complexes to DNA is particularly intriguing due to their distinctive intercalating capabilities. This study unveils a remarkable phenomenon observed with a specific Zn complex, ([B-Zn-N3], where B is a Schiff base ligand), during DNA intercalation investigations in the popular DMSO-Water binary solvent mixture. An unanticipated observation revealed time-dependent changes in the UV-visible absorption spectroscopic studies, coupled with the existence of an isosbestic point. This observation questions the stability of the intercalating agent itself during the intercalation process. The emergence of a decomposed product during the intercalation study has been confirmed through various analytical techniques, including CHN analysis, MALDI mass, XPS, Raman spectroscopy, and Powder XRD. The change in the chemical species on intercalation is further substantiated by theoretical studies, adding depth to our understanding of the intricate dynamics at play during DNA intercalation with the [B-Zn-N3] complex in the DMSO-Water system.

Acidic solvent improves cisplatin action in in-vitro.

As cisplatin is one of the most broadly used chemotherapeutics, it is widely tested in vitro & in vivo assays, involving attempts to better understand its mechanism of action, develop strategies to mitigate its toxicity, or develop new drug combinations. Presently, for in vitro assays, dissolving cisplatin in dimethyl sulfoxide (DMSO) is discouraged due to its significant reduction in drug activity, Alternatively, inorganic solvents like normal saline (NS) are recommended. However, this approach is still problematic, including 1) instability of cisplatin in NS, 2) limited solubility, 3) the need to avoid long-term storage at -80 °C (or -20 °C) after dissolving, and 4) complications when combining with other DMSO-solubilized compounds. Here, we report a DMSO-HCl mixture as an alternative solvent to address these challenges. Cisplatin in DMSO-HCl not only retains comparable drug activity to cisplatin in NS but also exhibits increased stability over an extended period. Our brief report sheds light on cisplatin action, providing insights to aid in cancer research in vitro.

Modulation of bacterial membranes and cellular macromolecules by dimethyl sulfoxide: A dose-dependent study providing novel insights.

Using Escherichia coli as a model, this manuscript delves into the intricate interactions between dimethyl sulfoxide (DMSO) and membranes, cellular macromolecules, and the effects on various aspects of bacterial physiology. Given DMSO's wide-ranging use as a solvent in microbiology, we investigate the impacts of both non-growth inhibitory (1.0 % and 2.5 % v/v) and slightly growth-inhibitory (5.0 % v/v) concentrations of DMSO. The results demonstrate that DMSO causes alterations in bacterial membrane potential, influences the electrochemical characteristics of the cell surface, and exerts substantial effects on the composition and structure of cellular biomolecules. Genome-wide gene expression data from DMSO-treated E. coli was used to further investigate and bolster the results. The findings of this study provide valuable insights into the complex relationship between DMSO and biological systems, with potential implications in drug delivery and cellular manipulation. However, it is essential to exercise caution when utilizing DMSO to enhance the solubility and delivery of bioactive compounds, as even at low concentrations, DMSO exerts non-inert effects on cellular macromolecules and processes.

Impact of cryopreservation on elastomuscular artery mechanics.

Low temperatures slow or halt undesired biological and chemical processes, protecting cells, tissues, and organs during storage. Cryopreservation techniques, including controlled media exchange and regulated freezing conditions, aim to mitigate the physical consequences of freezing. Dimethyl sulfoxide (DMSO), for example, is a penetrating cryoprotecting agent (CPA) that minimizes ice crystal growth by replacing intracellular water, while polyvinyl alcohol (PVA) is a nonpenetrating CPA that prevents recrystallization during thawing. Since proteins and ground substance dominate the passive properties of soft biological tissues, we studied how different freezing rates, storage temperatures, storage durations, and the presence of cryoprotecting agents (5% [v/v] DMSO + 1 mg/mL PVA) impact the histomechanical properties of the internal thoracic artery (ITA), a clinically relevant blood vessel with both elastic and muscular characteristics. Remarkably, biaxial mechanical analyses failed to reveal significant differences among the ten groups tested, suggesting that mechanical properties are virtually independent of the cryopreservation technique. Scanning electron microscopy revealed minor CPA-independent delamination in rapidly frozen samples, while cryoprotected ITAs had better post-thaw viability than their unprotected counterparts using methyl thiazole-tetrazolium (MTT) metabolic assays, especially when frozen at a controlled rate. These results can be used to inform ongoing and future studies in vascular engineering, physiology, and mechanics.

Optimization and degradation studies of cellulose transesterification to palmitate esters in superbase ionic liquid.

Cellulose palmitates (CPs) were synthesized with varying degrees of substitution (DS) via a catalyst-free, homogeneous transesterification of cellulose in a novel superbase ionic liquid (SB-IL) system, specifically 5-methyl-1,5,7-triaza-bicyclo[4.3.0]non-6-enium acetate [mTBNH][OAc], combined with dimethyl sulfoxide (DMSO) as a co-solvent, using vinyl palmitate as the acylating agent. We examined the influence of reaction temperature, reaction time, and the molar ratio of vinyl palmitate to anhydroglucose unit (AGU) on the DS, which ranged from 0.5 to 2.3 under the given conditions. Notably, the reaction order of the three hydroxy groups was C6-OH > C2-OH > C3-OH. To elucidate the chemical structure of CPs and confirm the transesterification process, various spectroscopic techniques including 1H nuclear magnetic resonance (NMR), 13C NMR, heteronuclear single quantum correlation (HSQC), and solid-state NMR were employed. Higher reaction temperatures and extended reaction times led to a decrease in the DS of CPs, potentially due to the degradation of some of the involved chemicals during the transesterification process. We also investigated the stability of the pure ionic liquid (IL) and the IL + DMSO solvent system at elevated temperatures by heating them at 100 °C for 5 h, confirming their chemical integrity through 1H NMR analysis. Additionally, we assessed the compatibility between the solvent system and cellulose by subjecting a mixture of cellulose and the solvent system to 100 °C for 5 h. To compare the structures of untreated cellulose and regenerated cellulose, Fourier transform infrared (FT-IR) spectroscopy was employed. Furthermore, we determined the molar mass of both untreated cellulose and regenerated cellulose, as well as CPs synthesized at higher reaction temperatures and longer durations, using intrinsic viscosity measurements. Lastly, we examined the solubility properties of CPs.

Dimethyl Sulfoxide: An Ideal Electrochemical Probe for Hydroxyl Radical Detection.

In situ and real-time determination of hydroxyl radicals (•OH) in physiological and pathological processes is a great challenge due to their ultrashort lifetime. Herein, an electrochemical method was developed by using dimethyl sulfoxide (DMSO) as a trapping probe for rapid determination of •OH in aqueous solution. When DMSO reacted with •OH, an intermediate product methane sulfinic acid (MSIA) was formed, which can be electrochemically oxidized to methanesulfonic acid (MSA) on the glassy carbon electrode (GCE), resulting in a distinct voltammetric signal that is directly proportional to the concentration of •OH. Other commonly encountered reactive oxygen species (ROS), including hypochlorite anions (ClO-), superoxide anions (O2•-), sulfate radicals (SO4•-), and singlet oxygen (1O2), have showed no interference for •OH determination. Thus, an electrochemical method was developed for the determination of •OH, which exhibits a wide linear range (0.4-5120 µM) and a low limit detection of 0.13 µM (S/N = 3) and was successfully applied for the quantification of •OH in aqueous extracts of cigarette tar (ACT). Alternatively, the same reaction mechanism is also applicable for the determination of DMSO, in which a linear range of 40-320 µM and a detection limit 13.3 µM (S/N = 3) was achieved. The method was used for the evaluation of DMSO content in cell cryopreservation medium. This work demonstrated that DMSO can serve as an electrochemical probe and has valuable application potential in radical study, biological research, and environmental monitoring.

Effect of solution on starch structure: New separation approach of amylopectin fraction from gelatinized native corn starch.

The complete dissolution of starch without degradation are necessary prerequisites for starch fractionation to obtain amylose or amylopectin (AP). With the recent, continuous progress in finding efficient and eco-friendly starch-dissolving solutions, applying new solvents for starch fractionation is important. In this study, the effects of dimethyl sulfoxide (DMSO), NaOH, and CaCl2 solutions on starch structure and AP product parameters during starch fractionation were compared with respect to the starch deconstruction effect. This study proved that the CaCl2 solution could effectively dissolve corn starch (50 °C, solubility of 98.96 %), and promote the regeneration of starch into uniform and fine particles. Furthermore, the three solvents (DMSO, NaOH, and CaCl2) changed the crystal structure of corn starch, but they were all non-derivatizing solvents. The effect of the CaCl2 solution on the molecular structure of corn starch was the least significant of the three solvents. Finally, the extraction rate of AP from the CaCl2 solution reached 69.45 %. In conclusion, this study presents a novel and effective method for AP extraction.

Enhancement of intermolecular aggregation on solvent-influenced strong hydrogen-bonded single crystal.

The intermolecular aggregation between the solvent and organic molecules is covered in the current article. 4,4'-(Buta-1,3-diyne-1,4-diyl)dibenzoic acid (DADBA) was used as an organic molecule and dimethyl sulfoxide (DMSO) as a solvent to create the target compound DADBA-DMSO. The material's hydrogen bonding and intermolecular aggregation were determined by appropriate characterization methods, including single-crystal X-ray diffraction (XRD), Fourier-transform infrared (FTIR), photoluminescence (PL), and cyclic voltammetry (CV) analysis. Each hydrogen of the carboxylic group is coordinated by oxygen from the DMSO molecule in the stiff planar layer packing that makes up the DADBA-DMSO crystal structure.

Protocol for reconstituting peptides/peptidomimetics from DMSO to aqueous buffers for circular dichroism analyses.

Circular dichroism (CD) spectrometry is a rapid technique for detecting protein secondary structure, particularly helicity. DMSO is used to ensure optimal solubility of peptides/peptidomimetics; however, its background absorbance hinders effective CD analysis. Here, we present a protocol for reconstituting peptides/peptidomimetics from DMSO to aqueous buffers for CD analyses. We describe steps for identifying chemicals that induce DMSO evaporation, extracting peptides/peptidomimetics from DMSO, and CD spectrometer setup and analysis. We then detail procedures for secondary structure analyses of reconstituted peptides/peptidomimetics. For complete details on the use and execution of this protocol, please refer to Gao et al. (2023).1.

Formation of Trideuteromethylated Artifacts of Pyrrole-Containing Natural Products.

Pyrrole-containing natural products form a large group of structurally diverse compounds that occur in both terrestrial and marine organisms. In the present study the formation of trideuteromethylated artifacts of pyrrole-containing natural products was investigated, focusing on the discorhabdins. Three deuterated discorhabdins, 1, 3, and 5, were identified to be isolation procedure artifacts caused by the presence of DMSO-d6 during NMR sample preparation and handling. Three additional semisynthetic derivatives, 7-9, were made during the investigation of the mechanism of formation, which was shown to be driven by trideuteromethyl radicals in the presence of water, methanol, TFA, and traces of iron in the deuterated solvent. Generation of trideuteromethylated artifacts was also confirmed for other classes of pyrrole-containing metabolites, namely, makaluvamines, tambjamines, and dibromotryptamines, which had also been dissolved in DMSO-d6 during the structure elucidation process. Semisynthetic discorhabdins were assessed for antiproliferative activity against a panel of human tumor cell lines, and 14-trideuteromethyldiscorhabdin L (3) averaged low micromolar potency.

Acetone-induced structural variant of insulin amyloid fibrils.

Self-propagating polymorphism of amyloid fibrils is a distinct manifestation of non-equilibrium conditions under which protein aggregation typically occurs. Structural variants of fibrils can often be accessed through physicochemical perturbations of the de novo aggregation process. On the other hand, tiny changes in the amino acid sequence of the parent protein may also result in structurally distinguishable amyloid fibrils. Here, we show that in the presence of acetone, the low-pH fibrillization pathway of bovine insulin (BI) leads to a new type of amyloid with the infrared features (split amide I' band with the maximum at 1623 cm-1) bearing a striking resemblance to those of the previously reported fibrils from recombinant LysB31-ArgB32 human insulin analog formed in the absence of the co-solvent. Insulin fibrils formed in the presence ([BI-ace]) and absence ([BI]) of acetone cross-seed each other and pass their infrared features to the daughter generations of fibrils. We have used dimethyl sulfoxide (DMSO) coupled to in situ infrared spectroscopy measurements to probe the stability of fibrils against chemical denaturation. While both types of fibrils eventually undergo DMSO-induced disassembly coupled to a ß-sheet→coil transition, in the case of [BI-ace] amyloid, the denaturation is preceded by the fibrils transiently acquiring the [BI]-like infrared characteristics. We argue that this effect is caused by DMSO-induced dehydration of [BI-ace]. In support to this hypothesis, we show that, even in the absence of DMSO, the infrared features of [BI-ace] disappear upon drying. We discuss this very peculiar aspect of [BI-ace] fibrils in the context of recently accessed in silico models of plausible structural variants of insulin protofilaments.

A computational investigation of DMSO/water separation through functionalized GO multilayer nanosheet membrane using molecular dynamics simulation and deep neural network model for membrane performance prediction.

In this molecular dynamics (MD) simulation study, the separation of dimethyl sulfoxide (DMSO) from water was investigated using multilayer functionalized graphene oxide (GO) membranes. The GO nanosheets were modified with chemical groups (-F, -H) to alter their properties. The study analyzed the influence of pressure and functional groups on the separation rate. Additionally, a deep neural network (DNN) model was developed to predict membrane behavior under different conditions in water treatment processes. Results revealed that the fluorine-functionalized membrane exhibited higher permeation compared to the hydrogen-functionalized one, with potential of mean force (PMF) analysis indicating higher energy barriers for water molecules passing through the hydrogen-functionalized membrane. The study used density profile, water density map analysis, and radial distribution function (RDF) analysis to understand water and DMSO molecule interactions. The diffusion coefficient of water molecules was also calculated, showing higher diffusion in the fluorine-functionalized system. Overall, the findings suggest that functionalized GO membranes are effective for DMSO-water separation, with the fluorine-functionalized membrane showing superior performance. The DNN model accurately predicts membrane behavior, contributing to the optimization of membrane separation systems.

Structure-Property Relationships of Short Chain (Mixed) Cellulose Esters Synthesized in a DMSO/TMG/CO2 Switchable Solvent System.

Increasing environmental pollution and petroleum resource depletion are important indicators for the necessary and inevitable replacement of fossil-based polymeric materials with more sustainable counterparts. Hence, the development of bio-based materials from renewable resources, such as cellulose, is of great importance. Herein, we introduce a rapid and homogeneous microwave assisted synthesis of high molecular weight (59 kDa ≤ Mn ≤ 116 kDa) short chain (mixed) cellulose esters (CEs) with variable acyl side chain length (2 ≤ C ≤ 8) by using a DMSO/TMG/CO2 switchable solvent system. Accordingly, (mixed) CEs were synthesized by implementing tetramethylguanidine (TMG) into a switchable solvent system (DMSO/TMG/CO2), followed by in-depth structural characterization via IR, 1H NMR, 13C NMR, and SEC. Examination of the structure-property relationships revealed a decrease in the glass transition temperature (177 °C ≤ Tg ≤ 204 °C), an increase in surface hydrophobicity, i.e., water contact angle (WCA) (65° ≤ WCA ≤ 98°), and a decrease of Young's modulus (7.51 MPa ≤ E ≤ 13.6 MPa), with longer alkyl side chains.

Concentration effect of DMSO-dry bonding on the stability of etch-and-rinse bonds.

OBJECTIVES: To examine whether lower dimethyl sulfoxide (DMSO) concentrations would affect long-term bond stability of simplified or multistep water-based adhesives to dry-etched dentin. METHODS: H3PO4-etched mid-coronal dentin surfaces from human molars were randomly blot- or air-dried for 30 s and pretreated or not with 5 or 50 % (v/v) ethanolic DMSO solutions. Untreated samples served as control. Samples were bonded with a two-step or a three-step etch-and-rinse adhesive. Restored crown segments (n = 5/group) were stored in distilled water for 24 h and sectioned for microtensile bond strength testing. Resin-dentin beams (0.8 mm2) were tested under tension until fracture (0.5 mm/min) after 24 h and one year of storage in artificial saliva at 37 °C. Nanoleakage evaluation and hybrid layer characterization were performed by SEM. Bond strength data was examined by three-way ANOVA followed by the Tukey test (α = 0.05). RESULTS: Dry bonding produced significantly lower bond strengths than conventional wet bonding for both water-based adhesive systems (p < 0.05). DMSO-dry bonding restored bond strengths and reduced nanoleakage levels, regardless of adhesive type or DMSO concentration (p < 0.05). Bond strengths of DMSO-dry bonded samples were not significantly affected by long-term ageing regardless of adhesive type or DMSO concentration (p < 0.05). SIGNIFICANCE: Although bonding methacrylate-based resins to etched dentin is normally performed under wet conditions, hybridization of air-dried collagen can outperform conventional wet bonding by employing water-free DMSO solutions with concentrations as low as 5 %. Reduced moisture-related technique sensitivity, higher bonding performance and improved hybrid layer stability may contribute to extend the service life of resin-dentin bonding.

High-throughput screening of LogD by using a sample pooling approach based on the traditional shake flask method.

A new approach for screening LogD is presented. The method is based on the shake flask method combined with rapid generic LC-MS/MS bioanalysis by using a sample pooling approach that enables high-throughput screening of LogD or LogP in the drug discovery stage. The method is evaluated by a comparison of measured LogD between single and pooled compounds for a test set of structurally diverse compounds with a wide range of LogD values (from -0.04 to 6.01). Test compounds include 10 commercially available drug standards along with 27 new chemical entities. A good correlation (RMSE = 0.21, R2 = 0.9879) of LogD between the single and pooled compounds was obtained, suggesting that at least 37 compounds can be simultaneously measured with acceptable accuracy. The sample pooling method significantly reduced the number of bioanalysis samples as compared to the single compound measurement by the conventional shake flask method. The impact of DMSO content on LogD measurement was also investigated and the result demonstrated that at least 0.5% DMSO was tolerated in this method. The current new development will facilitate the drug discovery process by more rapidly assessing the LogD or LogP of drug candidates.