Conocimiento en estudiantes de enfermería sobre desinfección terminal del área quirúrgica / Knowledge in nursing students about terminal disinfection of the surgical area

Determinar el nivel de conocimiento de los estudiantes de enfermería de la Universidad Técnica de Ambato sobre la desinfección terminal del área quirúrgica. Metodología: Esta investigación es cuantitativa, con enfoque descriptivo de cohorte transversal ya que el nivel de conocimiento se ha representado mediante tablas y gráficos para describir la problemática del periodo octubre 2023-febrero 2024. Resultados: Se evidencia el alto porcentaje de respuestas incorrectas por cada ítem por parte de los estudiantes. La categoría desinfección fue respondida de manera incorrecta con un porcentaje del 26%, la categoría proceso de desinfección con el 55,6%, la categoría aplicación del DAN con el 45.8%, la categoría desinfectante del DAN con el 36,2% y, por último, la categoría riesgo y prevención del DAN con el 29,2%. Conclusiones: El nivel de conocimiento de los estudiantes sobre desinfección es bajo, porque no están lo suficientemente motivados o interesados en el tema de desinfección[AU]

Determine the level of knowledge of nursing students at the Technical University of Ambato about terminal disinfection of the surgical area.Methodology:This research is quantitative, with a descriptive cross-sectional cohort approach and the level of knowledge has been represented through tables and graphs to describe the problems of the period October 2023-February 2024.Results:A high percentage of incorrect answers for each item by the students is evident. The disinfection category was answered incorrectly with a percentage of 26%, the disinfection process category with 55.6%, the DAN application category with 45.8%, the disinfectant category with 36.2% and, finally, the DAN risk and prevention category. with 29.2%. Conclusions:The level of knowledge of students about disinfection is low, because they are not sufficiently motivated or interested in the topic of disinfection[AU]

Determinar o nível de conhecimento dos estudantes de enfermagem da Universidade Técnica de Ambato sobre desinfecção terminal da área cirúrgica. Metodologia:Esta pesquisa é quantitativa, com abordagem descritiva de coorte transversal e o nível de conhecimento foi representado por meio de tabelas e gráficos para descrever os problemas do período outubro de 2023 a fevereiro de 2024.Resultados: Evidencia-se um alto percentual de respostas incorretas para cada item por parte dos alunos. A categoria desinfecção foi respondida incorretamente com um percentual de 26%, a categoria processo de desinfecção com 55,6%, a categoria aplicação DAN com 45,8%, a categoria desinfetante com 36,2% e, por último, a categoria risco e prevenção DAN. com 29,2%.Conclusões:O nível de conhecimento dos alunos sobre desinfecção é baixo, porque não estão suficientemente motivados ou interessados no tema da desinfecção[AU]

The Resistance of Bacillus Spores: Implications for the Strain-Specific Response to High-Performance Disinfectants.

Bacterial spores in materials and equipment pose significant biosecurity risks, making effective disinfection crucial. This study evaluated Ortho-phthalaldehyde (OPA) and a quaternary ammonia-glutaraldehyde solution (AG) for inactivating spores of Bacillus thuringiensis (BT), B. cereus (BC), and two strains of B. velezensis (BV1 and BV2). Spores of BV1 and BT were treated with 22.5 mg/m3 OPA by dry fumigation or 1 mg/mL AG by spray for 20 min, according to the manufacturer's recommendation. As no sporicidal effect was observed, OPA was tested at 112.5 mg/m3 for 40 min, showing effectiveness for BT but not for BV1. Minimum bactericidal concentration (MBC) tests revealed higher MBC values for glutaraldehyde, prompting an overnight test with 112.5 mg/m3 OPA by dry fumigation and 50 mg/mL AG by spray, using formaldehyde as a control. AG reduced all Bacillus strains, but with limited sporicidal effect. OPA was sporicidal for BT and BV1 but not for BC and BV2, indicating a strain-dependent effect. Formaldehyde performed better overall but did not completely inactivate BV2 spores. Our findings suggest that OPA and AG have potential as formaldehyde replacements in wet disinfection procedures.

Optimizing ozone treatment for pathogen removal and disinfection by-product control for potable reuse at pilot-scale.

Reclaimed water poses environmental and human health risks due to residual organic micropollutants and pathogens. Ozonation of reclaimed water to control pathogens and trace organics is an important step in advanced water treatment systems for potable reuse of reclaimed water. Ensuring efficient pathogen reduction while controlling disinfection byproducts remains a significant challenge to implementing ozonation in reclaimed water reuse applications. This study aimed to investigate ozonation conditions using a plug flow reactor (PFR) to achieve effective pathogen removal/inactivation while minimizing bromate and N-Nitrosodimethylamine (NDMA) formation. The pilot scale study was conducted using three doses of ozone (0.7, 1.0 and 1.4 ozone/total organic carbon (O3/TOC) ratio) to determine the disinfection performance using actual reclaimed water. The disinfection efficiency was assessed by measuring total coliforms, Escherichia coli (E. coli), Pepper Mild Mottle Virus (PMMoV), Tomato Brown Rugose Fruit Virus (ToBRFV) and Norovirus (HNoV). The ozone CT values ranged from 1.60 to 13.62 mg min L-1, resulting in significant reductions in pathogens and indicators. Specifically, ozone treatment led to concentration reductions of 2.46-2.89, 2.03-2.18, 0.46-1.63, 2.23-2.64 and > 4 log for total coliforms, E. coli, PMMoV, ToBRFV, and HNoV, respectively. After ozonation, concentrations of bromate and NDMA increased, reaching levels between 2.8 and 12.0 µg L-1, and 28-40.0 ng L-1, respectively, for average feed water bromide levels of 86.7 ± 1.8 µg L-1 and TOC levels of 7.2 ± 0.1 mg L-1. The increases in DBP formation were pronounced with higher ozone dosages, possibly requiring removal/control in subsequent treatment steps in some potable reuse applications.

Analysis of in vitro expression of virulence genes related to antibiotic and disinfectant resistance in Escherichia coli as an emerging periodontal pathogen.

The collective involvement of virulence markers of Escherichia coli as an emerging pathogen associated with periodontitis remains unexplained. This study aimed to implement an in vitro model of infection using a human epithelial cell line to determine the virulome expression related to the antibiotic and disinfectant resistance genotype and pulse field gel electrophoresis (PFGE) type in E. coli strains isolated from patients with periodontal diseases. We studied 100 strains of E. coli isolated from patients with gingivitis (n = 12), moderate periodontitis (n = 59), and chronic periodontitis (n = 29). The identification of E. coli and antibiotic and disinfectant resistance genes was performed through PCR. To promote the expression of virulence genes in the strains, an in vitro infection model was used in the human epithelial cell line A549. RNA was extracted using the QIAcube robotic equipment and reverse transcription to cDNA was performed using the QuantiTect reverse transcription kit (Qiagen). The determination of virulence gene expression was performed through real-time PCR. Overall, the most frequently expressed adhesion genes among the isolated strains of gingivitis, moderate periodontitis, and chronic periodontitis were fimH (48%), iha (37%), and papA (18%); those for toxins were usp (33%); those for iron acquisition were feoB (84%), fyuA (62%), irp-2 (61%), and iroN (35%); those for protectins were traT (50%), KpsMT (35%), and ompT (28%); and those for pathogenicity islands were malX (45%). The most common antibiotic and disinfectant resistance genes among gingivitis, moderate periodontitis, and chronic periodontitis strains were sul-2 (43%), blaSHV (47%), blaTEM (45%), tet(A) (41%), dfrA1 (32%), marR-marO (57%), and qacEA1 (79%). The findings revealed the existence of a wide distribution of virulome expression profiles related to the antibiotic and disinfectant resistance genotype and PFGE type in periodontal strains of E. coli. These findings may contribute toward improving the prevention and treatment measures for periodontal diseases associated with E. coli.

Effects of antimicrobials over sessile and planktonic microbiota associated with an industrial cooling water system.

The bacterial community from a cooling water system was investigated through culture-dependent and independent strategies, and the responses of planktonic and sessile bacteria (grown in glass slides and stainless-steel coupons) to antimicrobials of industrial and clinical use were assessed. The morphotypes with higher biofilm-forming potential were Pseudoxanthomonas sp., Rheinheimera sp., Aeromonas sp. and Staphylococcus sp., and the first also exhibited lower susceptibility to all antibiotics and biocides tested. 16S rRNA high throughput sequencing indicated that Pseudomonadota (77.1% on average, sd 11.1%), Bacteroidota (8.4, sd 5.7%), and Planctomycetota (3.0, sd 1.3%) were the most abundant phyla. KEGG orthologs associated with antibiotics and biocide resistance were abundant in all samples. Although the minimum inhibitory and bactericidal concentrations were generally higher for biofilms, morphotypes in planktonic form also showed high levels of resistance, which could be associated with biofilm cells passing into the planktonic phase. Overall, monochloramine was the most effective biocide.

Effect of disinfectants on multispecies biofilm, the physical and mechanical properties of polymethyl methacrylate, and the corrosion of cobalt chromium alloy.

STATEMENT OF PROBLEM: The optimal disinfection protocol that controls adverse effects and promotes effective antimicrobial action on removable prostheses is unclear. PURPOSE: This in vitro study investigated the effect of disinfectant solutions on the biological, physical, mechanical, and chemical properties of removable prosthesis materials. MATERIAL AND METHODS: Specimens of polymethyl methacrylate (PMMA) and cobalt chromium (Co-Cr) alloy were immersed in distilled water (PMMA) or artificial saliva (Co-Cr) as the control and in 0.25% sodium hypochlorite (NaOCl0.25%), 0.5% chloramine T (CT0.5%), and 0.15% Triclosan (TR0.15%). The antibiofilm activity was evaluated by microbial load and cell metabolisms of the mixed biofilm. Physical (color change, sorption, solubility, and surface roughness), mechanical (hardness, flexural, and impact strength), and chemical (corrosion) properties were analyzed before and after simulating a 5-year immersion. Laser confocal microscopy, scanning electron microscopy (SEM), and dispersive energy spectroscopy (EDS) complemented the analyses. The data were analyzed by using the Mann-Whitney U test, Kruskal-Wallis with Dunn posttests, 1-way ANOVA, and repeated measures ANOVA (α=.05). RESULTS: All solutions were effective against bacteria, but only NaOCl0.25% eliminated Candida spp. TR0.15%, and CT0.5% increased cell metabolisms. For interaction (time and solution), there was a reduction in PMMA hardness in the control and TR0.15%. Color, sorption, solubility, and flexural strength did not change. CT0.5% and TR0.15% were similar for impact resistance. CT0.5% caused the lowest roughness. NaOCl0.25% showed the greatest corrosive potential. Dark spots were seen under SEM in Co-Cr stored with NaOCl0.25% and TR0.15%. EDS indicated different proportions of oxygen, cobalt, chromium, and molybdenum. CONCLUSIONS: NaOCl0.25% had the best antimicrobial action. CT0.5% and TR0.15% have potential. Hardness and roughness changes were clinically acceptable, and the other properties remained unchanged. All the solutions caused color changes. NaOCl0.25% was unsatisfactory for use with Co-Cr, CT0.5% was intermediate, and TR0.15% was suitable.

Screening of the global health priority BoxⓇ reveals potential new disinfectants against the emerging multidrug-resistant pathogen Candida auris.

BACKGROUND: Candida auris has been identified by the World Health Organization as a critical pathogen due to its invasive nature, resistance to multiple drugs, and high mortality rates in hospital outbreaks. This fungus can persist on surfaces and human skin for extended periods, complicating infection control efforts. The need for effective disinfection strategies is urgent, as current disinfectants are often ineffective against C. auris biofilms. OBJECTIVE: The study aimed to identify potential disinfectants from a collection of 240 compounds in the Global Health Priority Box® that are effective against C. auris, particularly strains resistant to existing options. METHODS: The research employed a screening protocol using a fluconazole-resistant strain of C. auris (149/23). Antifungal activity was assessed using the microdilution method to determine Minimum Inhibitory Concentrations (MICs) and Minimum Fungicidal Concentrations (MFCs). Additional assays were conducted to evaluate biofilm inhibition, biofilm eradication, cell membrane integrity, nucleotide leakage, sorbitol protection assay, efflux pump inhibition, and hemolysis assay. RESULTS: Two compounds, Hydramethylnon (MMV1577471) and Flufenerim (MMV1794206), demonstrated significant inhibitory effects against C. auris. Hydramethylnon exhibited potent antifungal activity, inhibiting up to 93 % of fungal growth with an MFC of 16 µg/mL. Flufenerim inhibited up to 58 % of fungal growth, showing fungistatic action with an MFC greater than 4 µg/mL. Biofilm inhibition tests showed that both compounds significantly inhibited biofilm formation, with increased efficacy at higher concentrations. Both compounds showed eradication rates in both stages. Furthermore, Hydramethylnon and Flufenerim did not affect cell membrane integrity or nucleotide leakage, suggesting a mode of action not reliant on disrupting these cellular components. The sorbitol protection assay revealed that neither compound caused cell wall damage. In the efflux pump inhibition assay, Hydramethylnon did not activate efflux pumps, while Flufenerim activated efflux pumps, reducing its effectiveness. Hemocompatibility assay showed safety. CONCLUSION: The study highlights Hydramethylnon and Flufenerim as promising candidates for further development as disinfectants, offering potential solutions to the urgent need for effective disinfection agents against C. auris. The findings underscore the value of screening compound collections to identify novel antifungal agents and understand their mechanisms of action, thereby contributing to the advancement of new disinfection strategies in healthcare settings.

Ozone and peroxone disinfection of Toxocara canis eggs in water.

Water pollution in developing countries continues to be a major health problem due to various anthropological activities that contribute to the spread of many parasitic diseases, including those caused by helminths. The aim of this study is to explore the ability of ozone and peroxone to disinfect drinking water contaminated samples with Toxocara canis eggs. The oxidants used were ozone and ozone-hydrogen peroxide combination. The treatment of Toxocara canis eggs was carried out in a 50 ml reactor with an operating volume of 10 ml. The pH conditions (5, 7 and 10) were varied for each treatment. The treatment effect was calculated by counting eggs and examining the condition of the larvae larval condition (whole, broken and hatched larvae) using an optical microscope. The experiment was carried out by exposing the eggs for 60 and 120 minutes to ozone and peroxone. The best results were obtained for helminths treated with the ozone/hydrogen peroxide combination at pH 10, with an inactivation of 79.2%. The synergistic effect of ozone combined with hydrogen peroxide allows higher helminth egg inactivation rates, demonstrating that advanced oxidation processes are a real alternative to apply in the inactivation of Toxocara canis eggs. The results obtained in this study show that the ozone and peroxone treatment could be a useful disinfection process to destroy or inactivate Toxocara canis eggs in processes commonly applied in water treatment.

Biofilm formation by Listeria monocytogenes from the meat processing industry environment and the use of different combinations of detergents, sanitizers, and UV-A radiation to control this microorganism in planktonic and sessile forms.

This study aimed to evaluate the ability of biofilm formation by L. monocytogenes from the meat processing industry environment, as well as the use of different combinations of detergents, sanitizers, and UV-A radiation in the control of this microorganism in the planktonic and sessile forms. Four L. monocytogenes isolates were evaluated and showed moderate ability to form biofilm, as well as carried genes related to biofilm production (agrB, agrD, prfA, actA, cheA, cheY, flaA, sigB), and genes related to tolerance to sanitizers (lde and qacH). The biofilm-forming isolates of L. monocytogenes were susceptible to quaternary ammonium compound (QAC) and peracetic acid (PA) in planktonic form, with minimum inhibitory concentrations of 125 and 75 ppm, respectively, for contact times of 10 and 5 min. These concentrations are lower than those recommended by the manufacturers, which are at least 200 and 300 ppm for QAC and PA, respectively. Biofilms of L. monocytogenes formed from a pool of isolates on stainless steel and polyurethane coupons were subjected to 14 treatments involving acid and enzymatic detergents, QAC and PA sanitizers, and UV-A radiation at varying concentrations and contact times. All treatments reduced L. monocytogenes counts in the biofilm, indicating that the tested detergents, sanitizers, and UV-A radiation exhibited antimicrobial activity against biofilms on both surface types. Notably, the biofilm formed on polyurethane showed greater tolerance to the evaluated compounds than the biofilm on stainless steel, likely due to the material's surface facilitating faster microbial colonization and the development of a more complex structure, as observed by scanning electron microscopy. Listeria monocytogenes isolates from the meat processing industry carry genes associated with biofilm production and can form biofilms on both stainless steel and polyurethane surfaces, which may contribute to their persistence within meat processing lines. Despite carrying sanitizer tolerance genes, QAC and PA effectively controlled these microorganisms in their planktonic form. However, combinations of detergent (AC and ENZ) with sanitizers (QAC and PA) at minimum concentrations of 125 ppm and 300 ppm, respectively, were the most effective.

Gaseous ozone and ozonized mist in the control of Escherichia coli on 'Rama Forte' persimmon.

This study aimed to evaluate the effectiveness of using two ozone applications (gaseous and mist) as a disinfection method for fresh persimmon. To test these sanitizers, in vitro and in vivo assays were performed, and the Escherichia coli was selected because it is a pathogen that causes foodborne diseases in humans. For in vitro experiments, a plate was inoculated with Escherichia coli strain ATCC 25922 and treated. For in vivo assays, persimmon fruit surface was inoculated with the bacteria and treated. For both assays, it was used 10,15,20,30,40 and 50 µL L-1 of gaseous ozone or ozonized mist for five minutes. The results demonstrated that the gas ozone application significantly reduced the growth of E. coli on the plate surface in vitro at doses of 30, 40 and 50 µL L-1 (with 0.83, 0.89 and 0.95 log CFU mL-1, respectively). The application of ozonized mist showed a significant reduction for 50 µL L-1 (with 1.28 log CFU g-1). And, for the in vivo assays, ozonized mist significantly reduced the number of bacteria on the persimmon surface, with a 1.57 log reduction, which was the largest for 40 µL L-1. Therefore, it is possible to conclude that the ozone application can contribute to the control of microorganisms present on fruit surfaces.

Enhancing mouthguard longevity: Impact of surface treatment against aging from brushing and disinfectant exposure.

BACKGROUND/AIMS: The study aimed to assess the surface characteristics of sports mouthguards under mechanical stresses during cleaning, either by brushing or immersion in disinfectant solutions. MATERIAL AND METHODS: Ethylene-vinyl acetate samples, 4 mm thick, were randomly assigned to cleaning methods: control (C-no cleaning), brushing with water (B.W), brushing with neutral liquid soap (B.S), brushing with toothpaste (B.T), immersion in distilled water for 10 min (I.W), immersion in 2.25% sodium hypochlorite solution for 10 min (I.SH), and immersion in sodium bicarbonate solution for 5 min (I.SB). All cleaning methods were applied for 28 days. Surface roughness average (Ra) and wettability were measured at baseline for the control group (n = 9), and after cleaning for all the other groups. RESULTS: One-way ANOVA with Tukey tests (5% significance) indicated significant differences among groups (p < .05). The I.SB group had higher surface roughness than B.S and B.T (p < .05). B.W showed the lowest wettability, significantly lower than B.T, I.W, and I.SB (p < .05). I.SB exhibited the highest wettability, significantly different from sodium hypochlorite, neutral liquid soap, brushing with water, and control groups (p < .05). The sodium bicarbonate immersion group (I.SB) demonstrated greater statistical variation, displaying higher susceptibility to aging compared to brushing with neutral liquid soap. CONCLUSION: Cleaning mouthguards with a toothbrush, water, and neutral liquid soap emerged as the most promising method, causing minimal surface changes in the material.

Ecotoxicological evaluation of effluent from bovine slaughterhouses disinfected by peracetic acid (PAA) using the bioindicator Girardia tigrina.

The evaluation of the ecotoxicological effects of the effluent after treatment with peracetic acid is relevant to help establish reference concentrations for the disinfection process and waste recovery. Therefore, the objective of this work was to evaluate the ecotoxicity of effluent from a bovine slaughterhouse treated with peracetic acid on Girardia tigrina. The toxicity bioassays for planaria were the acute test (LC50) and chronic assays: locomotion, regeneration, reproduction and fertility. The results showed that the effluent treated with peracetic acid showed less toxicity than the effluent without application of peracetic acid. The effluent after peracetic acid application showed a chronic toxic effect in the reduction of locomotor speed in all studied disinfectant concentrations (0.8, 1.6, 3.3 and 6.6 µg L-1 of peracetic acid) and a delay in the formation of G. tigrina photoreceptors at the concentration of 6.6 µg L-1 of peracetic acid. Peracetic acid concentrations of 0.8, 1.6 and 3.3 µg L-1 were not toxic for blastema regeneration, photoreceptor and auricle formation, fecundity and fertility. In addition, this study assists in defining doses of peracetic acid to be recommended in order to ensure the wastewater disinfection process without causing harm to aquatic organisms.

Exploring fishery waste potential as antifouling component.

Marine biofouling is a global issue with economic and ecological implications. Existing solutions, such as biocide-based antifouling paints, are toxic for the environment. The search for better antifouling agents remains crucial. Recent research focuses on eco-friendly antifouling paints containing natural compounds like enzymes. This study evaluates enzymatic extracts from fishery residues for antifouling potential. Extracts from Pleoticus muelleri shrimp, Illex argentinus squid, and Lithodes santolla king crab were analyzed. Proteolytic activity and thermal stability were assessed, followed by bioassays on mussel byssus thread formation and barnacle cypris adhesive footprints. All three extracts demonstrated proteolytic activity and 24-h stability at temperate oceanic temperatures, except I. argentinus. P. muelleri extracts hindered cyprid footprint formation and mussel byssus thread generation. Further purification is required for L. santolla extract to assess its antifouling potential activity. This study introduces the use of fishery waste-derived enzyme extracts as a novel antifouling agent, providing a sustainable tool to fight against biofouling formation.

Enterobacteria in anaerobic digestion of dairy cattle wastewater: Assessing virulence and resistance for one health security.

Samples from a dairy cattle waste-fed anaerobic digester were collected across seasons to assess sanitary safety for biofertilizer use. Isolated enterobacteria (suggestive of Escherichia coli) were tested for susceptibility to biocides, antimicrobials, and biofilm-forming capability. Results revealed a decrease in total bacteria, coliforms, and enterobacteria in biofertilizer compared to the effluent. Among 488 isolates, 98.12 % exhibited high biofilm formation. Biofertilizer isolates exhibited a similar biofilm formation capability as effluent isolates in summer, but greater propensity in winter. Resistance to biocides and antimicrobials varied, with tetracycline resistance reaching 19 %. Of the isolates, 25 were multidrug-resistant (MDR), with 64 % resistant to three drugs. Positive correlations were observed between MDR and increased biofilm formation capacity in both samples, while there was negative correlation between MDR and increased biocide resistance. A higher number of MDR bacteria were found in biofertilizer compared to the effluent, revealing the persistence of E. coli resistance, posing challenges to food safety and public health.

Effect of immersion in disinfectants on the color stability of denture base resins and artificial teeth obtained by 3D printing.

PURPOSE: To evaluate the effect of immersion in disinfecting solutions on the color stability of denture base resins and artificial teeth obtained by 3D printing. MATERIALS AND METHODS: Forty discs (15 × 3 mm) were obtained for each group: Lucitone 550 and Cosmos Denture 3D (denture base resins), Duralay and Cosmos TEMP 3D (artificial teeth resins). The discs were immersed in disinfectant solutions: Corega Tabs, 2% chlorhexidine digluconate, 0.25% sodium hypochlorite, and distilled water. Color measurements were obtained with a spectrophotometer before immersion in disinfectants and after the simulated periods of 6 and 12 months. Data (ΔE00 ) were submitted to mixed three-way ANOVA and Bonferroni post-test. RESULTS: For denture base resins, Cosmos Denture 3D showed greater color change regardless of the solution and immersion time. The immersion time of 6 months influenced the color change of the denture base resins regardless of the disinfectant solution. For the artificial teeth resins, the immersion time of 12 months showed a significant color change when compared to 6 months. Cosmos TEMP 3D showed greater color change for all solutions, except for 0.25% sodium hypochlorite. Duralay resin showed greater color change in 2% chlorhexidine, regardless of immersion time. CONCLUSIONS: For denture base resins, the immersion time significantly changed the color regardless of the solution. For artificial teeth resins, Cosmos TEMP 3D showed greater color changes in all solutions when compared to Duralay, except for 0.25% sodium hypochlorite. Chlorhexidine digluconate significantly changed the color of Duralay.

Occupational risk assessment of glutaraldehyde through personal air monitoring in a hospital setting.

Glutaraldehyde is a high-efficiency disinfectant that has been included in the protocols of some hospitals for controlling the spread of SARS-CoV-2, together with sodium hypochlorite and quaternary ammonium disinfectants. However, exposure has been poorly studied in workplace settings, despite the association between glutaraldehyde and respiratory diseases and skin conditions in exposed workers. This study evaluated the magnitude of exposure associated with the use of glutaraldehyde in healthcare workers across various work areas of a first level of Hospital-Based Care in Colombia. Workers were classified into similar exposure groups (SEGs) based on work areas and tasks performed, and airborne concentrations of glutaraldehyde were measured in different work areas of each SEG through direct monitoring. The 95th percentile of glutaraldehyde concentrations in all SEGs studied exceeded the TLV-C immediately after use. Cleaning workers and nurses had the highest exposures to glutaraldehyde. Results indicate that workers were overexposed and highlight the need to implement controls to reduce exposure. The high-exposure levels also raise the need to consider glutaraldehyde substitution and adequate use of personal protective equipment (PPE).

Assessing the spatiotemporal occurrence and ecological risk of antifouling biocides in a Brazilian estuary.

Diuron and Irgarol are common antifouling biocides used in paints to prevent the attachment and growth of fouling organisms on ship hulls and other submerged structures. Concerns about their toxicity to non-target aquatic organisms have led to various restrictions on their use in antifouling paints worldwide. Previous studies have shown the widespread presence of these substances in port areas along the Brazilian coast, with a concentration primarily in the southern part of the country. In this study, we conducted six sampling campaigns over the course of 1 year to assess the presence and associated risks of Diuron and Irgarol in water collected from areas under the influence of the Maranhão Port Complex in the Brazilian Northeast. Our results revealed the absence of Irgarol in the study area, irrespective of the sampling season and site. In contrast, the mean concentrations of Diuron varied between 2.0 ng L-1 and 34.1 ng L-1 and were detected at least once at each sampling site. We conducted a risk assessment of Diuron levels in this area using the risk quotient (RQ) method. Our findings indicated that Diuron levels at all sampling sites during at least one campaign yielded an RQ greater than 1, with a maximum of 22.7, classifying the risk as "high" based on the proposed risk classification. This study underscores the continued concern regarding the presence of antifouling biocides in significant ports and marinas in Brazilian ports, despite international bans.

Novel Antibacterial and Biocompatible Nanostructured Gels Based on One-step Synthesis as a Potential Disinfectant for Endodontic Infection Control.

AIM: The objective of this study was to develop nanostructured gels as biocompatible intracanal disinfectants by one-step microwave radiation-assisted synthesis. METHODS: Polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) were used as a support network, and polyethylene glycol (PEG) was used as a reducing agent. The gels were characterized by measuring the swelling ratio (SR) and rheological properties and by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The antibacterial effects of each gel were evaluated against the endodontic clinical strain Enterococcus faecalis. Then, the viability of the 21-day mature multispecies bacterial biofilm was assessed using confocal microscopy in an ex vivo model, where the biofilm was exposed to the mix of nanogels. The cell proliferation, viability, and morphology of human periodontal ligament (HPDL) cells were quantified using a real-time IncuCyte® S3 Live-Cell System. Viability was measured by confocal microscopy using an ex vivo model exposing a 21-day mature multispecies bacterial biofilm to the mix of nanogels. RESULTS: The antibacterial activity of the gels coincided with the superficial characterization and the solubility of the gel in the growth medium. Gels with higher viscosity (327.85-980.58 Pa s), higher dissolution (42-70%SR), and lower porosity (no porosity and 611.63 nm) showed excellent antibacterial activity against E. faecalis. Despite their physicochemical characteristics, CuNPs gels showed greater effectiveness against E. faecalis.These nanostructured gels with high PVA concentrations promote HPDL cells proliferation while still exerting antibacterial properties. Mix of nanogels showed an increase non-viable cells biomass from at of application. CONCLUSIONS: The use of biocompatible polymers influences the physicochemical, bactericidal, and cytotoxic response, making these materials potential disinfectant agents against resistant bacteria with good biocompatibility and improved HPDL cells proliferation.

In vitro activity of sanitizers against mono- and polymicrobial biofilms of C. parapsilosis and S. aureus.

The emergence of disinfectant-resistant microorganisms poses a significant threat to public health. These resilient pathogens can survive and thrive in hospital settings despite routine disinfection practices, leading to persistent infections and the potential for outbreaks. In this study, we investigated the impact of 11 different commercial sanitizers at various concentrations and exposure times on biofilms consisting of clinical and nosocomial environmental isolates of Candida parapsilosis and Staphylococcus aureus. Among the sanitizers tested, 0.5% and 2.0% chlorhexidine (CLX), 10% polyvinyl pyrrolidone (PVP-I), a disinfectant based on quaternary ammonium compound (QAC), 2% glutaraldehyde, and 0.55% orthophthalaldehyde (OPA) demonstrated efficacy against both C. parapsilosis and S. aureus in monospecies and mixed biofilms. Analysis showed that 0.5% CLX and 10% PVP-I had fungicidal and bactericidal activity against all biofilms. However, the sanitizer based on QAC and 0.55% OPA proved to be bacteriostatic and fungicidal against both monospecies and mixed biofilms. In mixed biofilms, despite the last four sanitizers exerting fungicidal action, the reduction of fungal cells was approximately 4 log10 CFU/mL compared to monospecies biofilms, showing that the interaction provided more resistance of the yeast to the sanitizer. Formation of mixed biofilms in hospital settings can create an ecological niche that enhances the survival of pathogens against routine sanitization procedures. Therefore, effective sanitization practices, including regular cleaning with effective sanitizers, should be implemented to prevent C. parapsilosis/S. aureus biofilm formation in healthcare settings.

Effectiveness of disinfectant solutions associated or not with brushing on the biofilm control of a 3D printed-denture base resin.

BACKGROUND: The formation of biofilm on denture bases is a recurrent clinical problem that favors the development of denture stomatitis. The effectiveness of a hygiene protocol in a 3D-printed denture base resin is still uncertain. OBJECTIVE: To evaluate of the effectiveness of immersion, associated or not with brushing in a soap solution, on the biofilm control of a 3D-printed denture base resin. METHODOLOGY: Specimens of denture base resins [Cosmos Denture (COS) and Classico (CLA/control)] were contaminated in vitro with Candida albicans and immersed in sodium hypochlorite 0.25% (SH, alkaline peroxide) AP, chlorhexidine digluconate 2% (CD or PBS-Control), associated or not with brushing with 0.78% Lifebuoy soap. Roughness was evaluated before and after brushing and immersion. The effectiveness of the protocols was assessed by CFU/mL, cellular metabolism (XTT), scanning electron microscopy (SEM), and confocal scanning laser microscopy. Data were analyzed by T student, ANOVA/Welch, and Tukey/Gomes-Howell pos-hoc tests (α = 0.05). RESULTS: CLA showed greater roughness than COS. CFU/mL and XTT were higher in COS resin with a higher hyphae formation. Immersion in SH and CD eliminated CFU/mL and reduced XTT for both resins, associated or not with brushing. AP reduced CFU/mL only when associated with brushing. CONCLUSIONS: The biofilm on the 3D-printed resin was thicker and presumably more pathogenic, regardless of its smoother surface. Immersions in SH 0.25% and CD 2% are effective hygiene protocols for both resins, associated or not with brushing. AP should be recommended when associated with brushing with a Lifebuoy 0.78% solution.