ABSTRACT
The present study aimed to investigate the effects of five emulsifiers, including DATEM, DMG, PL, SDS, and SPP, on HA formation in chemical models and roasted chicken patties. UPLC-MS analysis showed that DMG and SPP were the most promising among them. In particular, at 0.15-0.9% (w/w) in roasted chicken patties, they effectively reduced the contents of PhIP (21-43%), MeIQx (26-50%) and 4,8-DiMeIQx (16-43%) relative to the control, whereas DATEM, PL and SDS promoted their formation. Low-Field Nuclear Magnetic Resonance and Magnetic Resonance Imaging analysis revealed that the inhibitory effect of SPP and DMG was partly mediated through their capability to help retain water in the macromolecular structures of the muscle tissue. This favorable effect was also supported by the significantly improved adhesiveness of the SPP and DMG samples relative to other samples. These findings suggest that SPP and DMG are effective additives for attenuation of HA contents in meat-based products.
Subject(s)
Chickens , Heterocyclic Compounds , Animals , Cooking/methods , Chromatography, Liquid , Water , Tandem Mass Spectrometry/methods , Heterocyclic Compounds/analysis , Meat/analysis , Amines/chemistry , Emulsifying Agents/analysisSubject(s)
Acrylates/adverse effects , Dermatitis, Allergic Contact/etiology , Gels/adverse effects , Ultrasonography , Urea/analogs & derivatives , Acrylates/analysis , Adult , Dermatitis, Allergic Contact/diagnosis , Emulsifying Agents/adverse effects , Emulsifying Agents/analysis , Female , Gels/chemistry , Humans , Male , Middle Aged , Patch Tests , Preservatives, Pharmaceutical/adverse effects , Preservatives, Pharmaceutical/analysis , Urea/adverse effects , Urea/analysisABSTRACT
BACKGROUND: Manufacturers are increasingly branding personal care products (PCPs) specifically for men. OBJECTIVE: The aim of the study was to characterize ingredients and claims of facial moisturizers marketed to men. METHODS: Men's facial moisturizers from 7 different online retailers were identified in June-September 2018. Ingredients were grouped and identified per the Ingredient Database of the Personal Care Products Council. Potential allergens were identified using the 2017 American Contact Dermatitis Society (ACDS) Core Allergen Series and 2017-2018 North American Contact Dermatitis Group Screening Series. RESULTS: Sixty-five men's facial moisturizers were identified with a total of 1930 ingredients. On average, there were 12 ACDS Core and 9 North American Contact Dermatitis Group Screening allergens per product. A total of 70.8% of products contained between 6 and 15 ACDS Core allergens. The most notable allergens were fragrances (present in 98.5% of products), propylene glycol/derivatives (32.3%), parabens (29.2%), and alkyl glucosides (26.2%). Interestingly, less than 10% of products contained the most common allergenic preservatives in PCPs: formaldehyde releasers and methylisothiazolinone. CONCLUSIONS: Men's facial moisturizers commonly contain fragrances, emulsifiers, and glucosides but relatively few allergenic preservatives. This may reflect changes in modern PCP preservation. These findings are important for modern dermatologists to be aware, especially in a new era of male skincare.
Subject(s)
Allergens/analysis , Cosmetics , Skin Cream/chemistry , Allergens/adverse effects , Allergens/chemistry , Emulsifying Agents/analysis , Humans , Male , Perfume/analysis , Perfume/chemistry , Plant Extracts/analysis , Preservatives, Pharmaceutical/analysis , Sexism , Skin Cream/adverse effectsABSTRACT
In the present study, the biodistribution of self-microemulsifying drug delivery system of hydrophobic olmesartan medoxomil (OM-SMEDDS) was determined by labeling with a fluorescent dye VivoTag®680 XL and Xenolight® DiR. Labeled OM-SMEDDS and control dye solution administered orally to mice; real-time dynamic biodistributions over 7 h were determined by 2D-fluorescent imaging to verify their anatomic location. Fluorescent Emissions by Vivotag 680® XL and Xenolight® DiR labeled OM-SMEDDS emitted 2 to 24 times stronger emission than control dye administered group. To further confirm the results, organs were removed and examined using the same technique at the end of 7 h. VivoTag®680XL and Xenolight® DiR emitted 4 and 1.7 times stronger emission respectively than control dye administered mice in ex-vivo organ imaging studies. This study showed that OM-SMEDDS can be succesfully labeled with fluorescent dye and tracked with optical imaging method for the visualisation of biodistribution of drugs and is also useful for enhanced bioavailability.
Subject(s)
Drug Delivery Systems/methods , Emulsifying Agents/metabolism , Fluorescent Dyes/metabolism , Olmesartan Medoxomil/metabolism , Optical Imaging/methods , Administration, Oral , Animals , Emulsifying Agents/administration & dosage , Emulsifying Agents/analysis , Fluorescent Dyes/administration & dosage , Fluorescent Dyes/analysis , Male , Mice , Olmesartan Medoxomil/administration & dosage , Olmesartan Medoxomil/analysis , Solubility/drug effects , Tissue Distribution/drug effects , Tissue Distribution/physiologyABSTRACT
The effects of lecithin addition at different concentrations (0-2.0%) on the physicochemical and emulsifying properties of mussel water-soluble proteins (MWP) were investigated. In solution system, low lecithin concentration (0.5%-1.0%) induced the aggregation and increased turbidity of composite particles. Lecithin addition caused changes in secondary structure and induced partial unfolding of MWP. Hydrophobic interactions between MWP and lecithin may contribute to the exposure of chromophores and hydrophobic groups of MWP. The interfacial tension decreased with lecithin addition. However, at a high lecithin concentration (1.5%-2.0%), the degree of aggregation and state of unfolding alleviated due to competitive adsorption. In emulsion system, with the low concentration of lecithin addition (0.5%-1.0%), droplet size and surface charge of emulsion decreased. The emulsion activity index, emulsion stability index, percentage of adsorbed protein increased. Both creaming stability and viscoelastic properties improved. At an intermediate lecithin concentration (1.0%), the emulsion showed the highest physical stability, while further addition of lecithin caused a slight deterioration in emulsifying properties. Overall, these results indicated the possibility that the lecithin-MWP mixed emulsifiers can be used to obtain emulsions with desirable properties.
Subject(s)
Bivalvia/chemistry , Emulsifying Agents/chemistry , Emulsions/chemistry , Lecithins/chemistry , Proteins/chemistry , Water/chemistry , Adsorption , Animals , Emulsifying Agents/analysis , Emulsions/analysis , Hydrophobic and Hydrophilic Interactions , Nephelometry and Turbidimetry , Particle Size , Protein Conformation , Protein Unfolding , Proteins/isolation & purification , Rheology , Surface Tension , Surface-Active Agents/chemistry , Viscoelastic Substances/analysis , Viscoelastic Substances/chemistry , ViscosityABSTRACT
The aim of this study was to assess the feasibility of shea butter stearin (SBS) as cocoa butter equivalent (CBE). In this work, the optimal ratio of SBS and cocoa butter (CB) was evaluated by the solid fat content and deviation solid fat content. Emulsifiers added to SBS and CB blends were first screened based on ß polymorph level, and mixture regression experiment was designed to obtain the optimized compound emulsifiers ratio, finally the characterization of shea butter chocolate was evaluated by sensory evaluation and texture profile analysis (TPA). The best compatibility was obtained when the mixture ratio of SBS and CB was 20:80, where ΔSFC within a range of 1.5 was shown. The appropriate compound emulsifiers were soy lecithin: polyglycerol polyricinoleate: Tween 60 = 1:1:1. Both sensory evaluation and TPA test showed SBS and CB blends could improve the taste and texture of chocolate with proper emulsifiers addition.
Subject(s)
Dietary Fats/analysis , Emulsifying Agents/analysis , Food Additives/analysis , Triglycerides/analysis , Cacao/chemistry , Chocolate/analysis , Food Handling , Glycerol/analogs & derivatives , Ricinoleic AcidsABSTRACT
The xylitol ester of hydrogenated rosin (XEHR) was obtained for the first time from biomass-based hydrogenated rosin and xylitol using an environmentally friendly, high-pressure CO2 catalytic synthesis. This compound is intended for use as an emulsifier for food. Analyses by ICP-AES showed the absence of heavy metal residues in the product, such that it met food standards. Fourier transform infrared and nuclear magnetic resonance spectroscopies together with gel permeation chromatography confirmed the successful esterification and the formation of a monoester and diester with molar masses of 427 and 772 g/mol. The emulsification of water/soybean oil mixtures by adding the XEHR was assessed at pH values of 4, 6.86, and 10 and in the presence of NaCl, KCl, MgCl2, and CaCl2. The XEHR was found to act as an emulsifier by reducing the interfacial tension of such mixtures to less than 2 mN/m under all conditions. The highest emulsifying activity index (9.52 m2/g) and emulsifying stability index (94.53%) were obtained after adding MgCl2 (100 mM). Particle size and confocal microscopy showed that the presence of salts gave a more uniform droplet size and a finer emulsion structure. The high viscosities of the emulsions containing salts also suggested a more cohesive oil droplet network.
Subject(s)
Emulsifying Agents/chemical synthesis , Esters/chemistry , Food Additives/chemical synthesis , Resins, Plant/chemistry , Xylitol/chemistry , Biomass , Carbon Dioxide/chemistry , Emulsifying Agents/analysis , Esters/analysis , Food Additives/analysis , Humans , Hydrogen-Ion Concentration , Hydrogenation , Magnesium Chloride/chemistry , Particle Size , Pressure , Soybean Oil/chemistry , Surface Tension , Water/chemistry , Xylitol/analysisABSTRACT
The physical properties of the mucilage polysaccharides of Dioscorea opposita (DOMP) were investigated in this study. The monosaccharide and amino acid contents, and molecular weight were determined, and morphology was observed. The rheological and emulsifying properties of different concentrations of DOMP were determined at acidic and basic pH (pH 5.0 and 9.0). The glucose and protein contents were 11.05% and 13.39%, respectively, and the average molecular weight was 9062 Da. The DOMP particles were spheres of 0.18 µm diameter, which aggregated in solution. The viscosity of DOMP decreased gradually with increase in shear rate, which was indicative of pseudoplastic characteristics. DOMP showed relatively better emulsification properties than Konjac glucomannan (KGM). The particle size of DOMP decreased and its emulsifying properties improved under both acidic and basic conditions. These results suggested that DOMP can be used as a natural processing agent for improving the mouth-feel of food.
Subject(s)
Amino Acids/analysis , Dioscorea/chemistry , Plant Mucilage/analysis , Polysaccharides/analysis , Emulsifying Agents/analysis , Food Handling , Humans , Molecular Weight , Monosaccharides/analysis , Particle Size , Rheology , ViscosityABSTRACT
PURPOSE OF REVIEW: The purpose of this review is to discuss the implications of the increased prevalence of emulsifiers in processed foods in daily consumption, the links to obesity both in mice and in vitro studies, and how those findings correlate with humans. RECENT FINDINGS: There is rising interest in understanding the contributors to the obesity epidemic. One potential component recently studied has been the consumption of processed foods causing inflammatory changes leading to metabolic syndrome. This phenomenon has been shown in several mice and in vitro studies with changes in microbiome composition, elevated fasting blood glucose, hyperphagia, increased weight gain and adiposity, hepatic steatosis increased inflammatory markers, and a correlation with increased incidence of colorectal cancer. Emulsifiers are found in most foods consumed in the US population, which has increased over the years. This review focuses on understanding the initial approved safe levels of emulsifier consumption, the preceding increased use in foods with higher daily consumption than was previously tested, measuring these levels in animal models, and the positive association with obesity and metabolic syndrome. Future research will require prospectively studying emulsifier consumption more accurately along with the associated respective changes in the microbiome to determine the relationship to obesity.
Subject(s)
Emulsifying Agents/adverse effects , Fast Foods/adverse effects , Food Additives/adverse effects , Obesity/etiology , Emulsifying Agents/analysis , Emulsifying Agents/pharmacology , Fast Foods/analysis , Food Additives/analysis , Food Additives/pharmacology , Gastrointestinal Microbiome/drug effects , Humans , Obesity/microbiologyABSTRACT
Advances in nanotechnology, combined with the use of natural products, represent a promissing research field. Brazil is a country of a rich biodiversity, especially in the Amazon forest. Fruits commonly used by local communities, such as bacaba (Oenocarpus bacaba), are potentially important for prospection of industrial applications of natural products. In nanotechnology, microemulsions stand out for providing a modified release to conveyed substances. This work aimed to develop microemulsionated formulations of bacaba oil, characterize them and evaluate their stability. We determined the HLB (hydrophile-lipophilic balance) of bacaba oil for formulation development. Six formulations were selected from pseudoternary diagrams, which indicated the proportions of surfactants, aqueous phase and bacaba oil. The viability of these formulations was evaluated through stability tests. We provided the rheological characterization of the formulations, evaluated their potential antioxidant activity through the DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging method, and determined the hydrodynamic diameter of the droplets. The microemulsions were stable throughout the test period. Droplet diameter was below 200 nm, and the microemulsions were characterized as newtonian fluids, presenting an increase in antioxidant activity when compared with the diluted oil. Our results confirm the potential of bacaba oil in microemulsionated formulation as a suitable carrier for active compounds. (AU)
Subject(s)
Amazonian Ecosystem , Nanotechnology , Emulsifying Agents/analysis , FruitABSTRACT
Demands for plant-based food and beverage products have escalated in recent years. However, many commercial coffee creamers are still being made using dairy derivatives such as sodium caseinate. Therefore, there is a need to investigate the replacement of dairy based proteins with plant-based alternatives. This study was carried out to systematically investigate the properties of model O/W emulsions stabilized by either sodium caseinate (0.25 to 1.5%) or soy lecithin (0.5 to 1.5%). The model emulsions were made of 10% medium chain triglyceride (MCT) oil-in-water emulsions at pHâ¯7. All model O/W emulsions exhibited whitish appearances similar to that of commercial creamers and were effective at lightening black coffee, except those containing the lowest emulsifier concentrations i.e., 0.25% caseinate or 0.5% lecithin. The lightness of the model emulsions depended on the type and level of emulsifier used, with soy lecithin-stabilized emulsions having similar lightening power compare to that stabilized by sodium caseinate. No feathering or free oil were observed in the whitened coffees at the highest emulsifier level used. Mixtures of caseinate and lecithin emulsifiers were also used and model O/W emulsions with similar physical properties to that stabilized by sodium caseinate alone were produced. The mixed emulsifier-stabilized model emulsions had similar lightness when added to coffee than those stabilized by the individual emulsifiers, suggesting similar stabilization mechanisms using these emulsifiers alone or in combination.
Subject(s)
Caseins/chemistry , Emulsifying Agents/chemistry , Emulsions/chemistry , Lecithins/chemistry , Coffee , Emulsifying Agents/analysis , Food Handling , Models, Chemical , Particle SizeABSTRACT
Peanut, sesame, and (peanut:sesame (1:1)) meal milk were used as the egg yolk substitute at the levels of 0%, 25%, 50%, 75%, and 100% in mayonnaise. Then, the rheological, textural (hardness, adhesive force, and adhesiveness), and microstructural properties of samples were evaluated on the first day after production. The oscillatory test indicated that all treatments had shear thinning flow behavior and in low-angular frequencies had higher elastic modulus than the viscous modulus (tan δ < 1), but in the P-S50 and P-S100, P75 and S75 in angular frequencies higher than 63 rad.s-1, tan δ was more than one (i.e. GⳠ> G') which indicated more viscous modulus (liquid-like flow behavior) than the elastic modulus (gel-like flow behavior). The optical microscopy confirmed that the oil particle size in blank, 25 and 50% of substitution was of smaller size, and the fat droplets had a monotonous and regular form. In 75 and 100% of substitution, the oil particle size was larger and more irregular than the other ones. Therefore, considering the emulsifying characteristic of oilseeds proteins, consumer health aspect (replacing meal protein with egg yolk in producing of low-cholesterol mayonnaise), and economic advantage aspect (reusing the oil-extraction factories by-products i.e., meal) using oilseed meal milk as an emulsifier agent in food industries especially emulsions is purposed.
Subject(s)
Arachis/chemistry , Cholesterol/analysis , Egg Yolk/chemistry , Fat Substitutes/analysis , Nutritive Value , Rheology , Sesamum/chemistry , Animals , Cholesterol, Dietary , Diet, Fat-Restricted , Emulsifying Agents/analysis , Emulsions/chemistry , Food Handling , Plant Oils/chemistry , ViscosityABSTRACT
Casein, whey proteins and monoglycerides are emulsifiers that adsorb at the oil-water interface to form and stabilise emulsions. This study aims to understand the effect of different milk protein compositions (ratio of sodium caseinate and whey protein concentrate (WPC)) with glycerol monooleate (GMO) on physicochemical properties, creaming and oxidative stability of the emulsions. Model emulsions with five different protein compositions were prepared by microfluidisation. The physicochemical properties were characterised by droplet size, zeta potential, viscosity and creaming index. Oxidative stability was assessed using volatile lipid oxidation compounds during ageing (28â¯days at 45⯰C). Results showed that the emulsion with only sodium caseinate produced smaller droplets (174.7â¯nm), higher zeta potential (-50.8â¯mV) and a more viscous emulsion (1.89â¯mPaâ¯s) compared to the emulsion with only WPC (191.4â¯nm; -38.8â¯mV; 1.65â¯mPaâ¯s). Protein composition had no significant effect on creaming stability. Eleven volatile compounds were identified as lipid oxidation markers and six compounds (2-pentylfuran, octanal, nonanal, 3-octen-2-one, 2,4-heptadienal, 3,5-octadien-2-one isomers) demonstrated that emulsions with mixed protein types (sodium caseinate and WPC) had better oxidative stability than emulsions with a single protein type. Therefore, mixed proteins with GMO form stable emulsions with both good physicochemical properties and oxidative stability.
Subject(s)
Caseins , Emulsifying Agents/analysis , Emulsions/analysis , Volatile Organic Compounds/analysis , Whey Proteins , Aldehydes , Beverages , Dairy Products , Humans , Lipid Peroxidation , Milk Proteins , Oils , Oxidation-Reduction , Particle Size , Viscosity , WaterABSTRACT
Additives stabilize or improve the organoleptic or functional properties (or both) of many dairy products including whipping cream. Their influence on the metabolic effect of dairy cream is scarcely known. We tested the hypothesis that added emulsifier (lactic acid esters of mono- and diglycerides; MAG/DAG), thickener (carrageenan, CGN), or both, could modify the metabolic effect, notably in the intestine and liver. Nine-week-old male C57Bl/6J mice were fed UHT cream (indirect treatment) mixed with nonlipidic powder (final: 13% milkfat) for 1 or 4 wk. We compared creams (1) without additive (Ctl), (2) with thickener (Th), 0.02% of κ-CGN, and (3) with both thickener and emulsifier, 0.1% of MAG/DAG esters (Th/Em). We analyzed plasma parameters, intestine, and liver. Fasting glycemia, insulinemia, triglyceridemia, nonesterified fatty acids, body weight gain, and liver weight did not differ among groups. After 1 wk, Th/Em had higher expression in the duodenum of some of the genes involved in (1) intestinal lipid absorption and (2) tight junction proteins versus Ctl and Th. After 4 wk, mucus cell number in the small intestine was higher in Th/Em versus Ctl and Th. Genes involved in endoplasmic reticulum (ER) stress in the duodenum were more expressed in Th/Em after 1 wk. After 4 wk, in the colon, a higher expression of ER stress genes was observed for Th versus Th/Em and Ctl. Liver damage score was not altered by additives. Adding both CGN (0.02%) and MAG/DAG esters (0.1%) in dairy cream did not result in deleterious outcomes in mice after 4 wk regarding lipid metabolism, intestinal permeability, and liver disorders. The longer term effect of intestinal ER stress modulation deserves further investigation.
Subject(s)
Dairy Products/analysis , Emulsifying Agents/analysis , Endoplasmic Reticulum Stress , Food Additives/analysis , Intestine, Small/metabolism , Lipid Metabolism , Animals , Cattle , Duodenum/metabolism , Emulsifying Agents/metabolism , Fatty Acids, Nonesterified/blood , Food Additives/metabolism , Liver/metabolism , Male , Mice , Mice, Inbred C57BL , Milk/chemistryABSTRACT
BACKGROUND: The economic burden of cosmetics, such as moisturizers, has been increasing. Despite the high price of some market moisturizers, there have been no studies evaluating the allergenicity of these products. OBJECTIVE: The aim of this study was to evaluate the potential allergens within moisturizers based on economic value, by analyzing the substances found in moisturizers available online at the largest drugstore chain-CVS Health (CVS Health, Woonsocket, RI). METHODS: In this cross-sectional study, ingredients found in 50 expensive and 50 inexpensive moisturizers were matched with sensitizers within the Core Allergen Series published by the American Contact Dermatitis Society and the North American Contact Dermatitis Group. Student t test was used to compare the mean number of allergens present in each group. A χ test or Fisher exact test, where necessary, was used to compare the rates of specific allergen groups between the expensive and inexpensive products. RESULTS: Twenty-six allergenic substances were present overall in the 100 total products surveyed. The expensive moisturizers averaged significantly more allergens per product (8.28 vs 5.60, P = 0.003) than the inexpensive products. CONCLUSIONS: The sensitizing potential of expensive moisturizers may be higher than that of inexpensive moisturizers. Physicians may counsel cosmetic-induced allergic contact dermatitis (ACD) patients that monetary value is not a suitable proxy for evaluating the risk of ACD.
Subject(s)
Allergens/analysis , Skin Cream/chemistry , Skin Cream/economics , Acrylates/analysis , Allergens/adverse effects , Commerce , Cross-Sectional Studies , Dermatitis, Allergic Contact/etiology , Emollients/analysis , Emulsifying Agents/analysis , Humans , Perfume/analysis , Pharmacies , Plant Extracts/analysis , Preservatives, Pharmaceutical/analysis , Skin Cream/adverse effects , alpha-Tocopherol/analogs & derivatives , alpha-Tocopherol/analysisABSTRACT
31P NMR is a valuable tool to study phosphorus-containing biomolecules from complex mixtures. One important group of such molecules are phosphorus-containing emulsifiers, including lecithins and ammonium phosphatides (AMPs), which are used in chocolate production. By developing extraction protocols and applying high resolution 31P nuclear magnetic resonance (NMR), we enable identification of the type of emulsifier used in chocolate. We furthermore demonstrate that this method allows quantification of AMPs in chocolate. To our knowledge, this is the first method that allows verification of the type and amount of emulsifier present in chocolate samples.
Subject(s)
Ammonium Compounds/analysis , Chocolate/analysis , Emulsifying Agents/analysis , Magnetic Resonance Spectroscopy/methods , Phospholipids/analysisABSTRACT
Macrogol-based emulsifiers and their respective precursor substances, i.e. macrogols (PEG), fatty acids (FA), and fatty alcohols (FAA), are widely used excipients which are usually characterized by a series of tests described within the European Pharmacopoeia (Ph. Eur.). Examples are bulk parameters such as the hydroxyl value, the peroxide value, and the determination of fatty acids composition by gas chromatography. The choice of tests depends on the emulsifier considered and its possible precursors. Though all methods are well established, most of them are time consuming and, in some cases, prone to errors and exhibit a low reproducibility. Here, an alternative and supplemental method was developed, using a HPLC-system coupled to a charged aerosol detector (CAD). Seven PEG samples, five saturated as well as two nonsaturated FA samples, and two FAA samples were analyzed. Together with these precursors, 13 macrogol-based emulsifiers of 3 different groups, i.e. macrogol ethers with FAA, macrogol esters with FA, and polysorbates, were successfully analyzed for oligomeric distribution and free precursor molecules in one run.
Subject(s)
Aerosols , Emulsifying Agents/analysis , Excipients/analysis , Fatty Alcohols/analysis , Polyethylene Glycols/analysis , Chromatography, High Pressure Liquid/methods , Fatty Acids/analysis , Reproducibility of ResultsABSTRACT
Medicated chewing gums (MCGs) represent a unique platform for drug delivery. They have been defined as solid single-dose preparations, which may contain more than one active pharmaceutical ingredient (API) with base consisting primarily of gum that has to be chewed for a certain period of time. They mainly contain a tasteless masticatory gum base as the core with other minor nonmasticatory ingredients, such as flavors and sweeteners. Despite their advantages in drug delivery, MCGs remain a niche product due to the complexity of their formulation, lack of acceptable testing methods, and intricacy of their manufacturing. Few studies have been reported on their use, and most of the information on their composition and production could be found in patent search. The aim of this review is to provide an overview of gum composition, manufacturing process, and characterization. Due to the scarcity of studies concerning the evaluation of the mechanical properties of MCGs, greater emphasis was placed on the available performance tests and procedures for the estimation of their mechanical and textural properties. While very few tests have been recommended by the official pharmacopeias, several tests have been suggested for assessing the mechanical properties of MCGs in vitro. Properties, such as chewiness, elasticity, and firmness, of chewing gums during mastication are imperative quality attributes that have been found to strongly correlate with gum composition and mouth feel.
Subject(s)
Chewing Gum/analysis , Chewing Gum/standards , Drug Delivery Systems/standards , Drug Delivery Systems/methods , Elasticity , Emulsifying Agents/analysis , Emulsifying Agents/chemical synthesis , Emulsifying Agents/standards , Mechanical Phenomena , Pharmaceutical Preparations/analysis , Pharmaceutical Preparations/chemical synthesis , Pharmaceutical Preparations/standards , Tensile StrengthABSTRACT
Bioemulsifier (BE)-producing Haererehalobacter sp. JS1 was isolated and identified from the solar salt works in India. The BE was extracted, purified, and characterized by Gas Chromatography-Mass Spectrometry (GC-MS) analysis. Emulsification activity was performed against different oils and dye degradation potential against different dyes. The production of BE was optimized using different carbon sources (C), nitrogen sources (N), pH, and NaCl. BE screening methods revealed that, Haererehalobacter sp. JS1 was highly positive BE production. Identification by 16S rRNA sequencing and analyses was found that, the Haererehalobacter sp. JS1 was closely related to Salinicoccus halophilus and Haererehalobacter sp. The structural characterization analysis confirmed that the partially purified bioemulsifier belongs to siloxane-type. Emulsification activity (E24) revealed that the bioemulsifier significantly (p < = 0.001) emulsified the commercial oils including coconut oil, gingelly oil, olive oil, and palmolein oils. Haererehalobacter sp. JS1 also significantly (p < = 0.001) degraded the dyes such as orange MR, direct violet, cotton red, reactive yellow, nitro green, and azo dye. RSM regression co-efficient and contour plot analysis clearly indicated that the combination of pH and NaCl helped to increase BE production. Siloxane-type of BE obtained from Haererehalobacter sp. JS1 was able to emulsify different oils and commercial dyes.
Subject(s)
Emulsifying Agents/metabolism , Gammaproteobacteria/isolation & purification , Gammaproteobacteria/physiology , Salt Tolerance , Biodegradation, Environmental , Chromatography, Gas , Emulsifying Agents/analysis , Emulsions , Gammaproteobacteria/classification , Halobacteriaceae/classification , Halobacteriaceae/isolation & purification , Halobacteriaceae/physiology , Hydrogen-Ion Concentration , India , Phylogeny , RNA, Ribosomal, 16S/genetics , TemperatureABSTRACT
Lipid oxidation is one of the most important reasons for the compromised shelf life of food emulsions. A major bottleneck in unravelling the underlying mechanisms is the lack of methods that provide a rapid, quantitative, and comprehensive molecular view on lipid oxidation in these heterogeneous systems. In this study, the unbiased and quantitative nature of 1H NMR was exploited to assess lipid oxidation products in mayonnaise, a particularly oxidation-prone food emulsion. An efficient and robust procedure was implemented to produce samples where the 1H NMR signals of oxidation products could be observed in a well resolved and reproducible manner. 1H NMR signals of hydroperoxides were assigned in a fatty acid and isomer specific way. Band-selective 1H NMR pulse excitation allowed immediate and precise (RSDR = 5.9%) quantification of both hydroperoxides and aldehydes with high throughput and large dynamic range at levels of 0.03 mmol/kg. Explorative multivariate data modeling of the quantitative 1H NMR profiles revealed that shelf life temperature has a significant impact on lipid oxidation mechanisms.