ABSTRACT
Road dust is a key repository for PAHs and transformed PAH products (TPPs) generated from natural and anthropogenic sources in the urban environment. Eventhough PAHs and TPPs are prone to post-emission photochemical processes, very limited studies exist on the subject for road dust. This knowledge gap is of particular concern since some of the resultant TPPs are notably more carcinogenic than their precursor PAHs. This study evaluated the role of 254 nm ultraviolet (UV) photons on the photochemistry of PAHs and TPPs in road dust. The findings show that UV irradiation had varying effects on the fate of analytes, particularly naphthalene (NAP), phenanthrene (PHE), 7, 12-dimethylbenz(a)anthracene (DMBA), 1-hydroxypyrene (HPY), 1-nitropyrene (1NPY), pyrene (PYR) and 5-nitroacenaphthene (5NAC). Photochemical relationship was identified between PYR, 1NPY and HPY, and DMBA and benzo(a)anthracene. Unlike carbonyl-PAHs, parent PAHs, nitro-PAHs and hydroxy-PAHs can originate from photolysis. Photon irradiation durations of 3, 6 and 7.5 h had the most intense influence on the photolytic process with 7.5 h as optimum. The photochemical rate at optimum irradiation duration shows an increasing trend of NAP < PHE < 1NPY < DMBA < 5NAC < HPY with respective estimates of 0.08, 0.11, 0.21, 0.22, 0.43, and 0.59 mg kg-1 hr-1. Physicochemical properties of analytes such as index of refraction and vapour pressure (in logarithmic form) had an inverse effect on photolysis. The knowledge generated is significant for the in-depth understanding of the fate of PAHs and TPPs on urban road surfaces and contributes to the greater protection of human health and the environment.
Subject(s)
Environmental Pollutants/chemistry , Environmental Pollutants/radiation effects , Polycyclic Aromatic Hydrocarbons/chemistry , Polycyclic Aromatic Hydrocarbons/radiation effects , Dust/analysis , Environmental Monitoring , Humans , Multivariate Analysis , Photolysis , Ultraviolet RaysABSTRACT
Phthalate derivatives with low estrogenic activity, high infrared spectrum signals, high Raman characteristic vibration spectrum, high fluorescence intensity, and high ultraviolet sensitivity were selected as precursors from our previous studies, so that the changes in their toxicity and estrogenic activity during biological metabolism, ozone oxidation, photocatalytic degradation, photodegradation, and microbial degradation could be studied.The transformation pathways of these derivatives were simulated, and the reaction energy barriers were calculated. To determine the potential environmental risks of these phthalate derivatives, the pharmacophore models of biotoxicity and estrogen activity of phthalates were used to predict the biotoxicity and estrogen activity of the transformed products. The results showed an increase in the biotoxicity and estrogen activity of the biometabolites, ozonation products, photocatalytic degradation products, and microbial degradation products; the only products that did not follow this trend were the photodegradation products. Notably, the pathways that produced more potentially toxic compounds were the less favorable paths. Our results indicate that the transformation products of the designed environmentally friendly phthalate derivatives potentially pose environmental risks. To avoid such risks, the environmental transformation pathway of these derivatives should be simulated to screen for environmentally friendly phthalate molecules. Environ Toxicol Chem 2020;39:1138-1148. © 2020 SETAC.
Subject(s)
Environmental Pollutants/toxicity , Models, Theoretical , Phthalic Acids/toxicity , Biodegradation, Environmental , Environmental Pollutants/analysis , Environmental Pollutants/radiation effects , Oxidation-Reduction , Ozone/chemistry , Photolysis , Phthalic Acids/analysis , Phthalic Acids/radiation effects , Risk AssessmentABSTRACT
Silicones have many applications and are produced in large quantities. Despite their potential toxicity, information on their environmental mineralisation is scarce. Therefore, we investigated a group of five organosilicon compounds (o-MeOC6H4SiMe3 (1), p-MeOC6H4SiMe3 (2), (p-MeOC6H4)2SiMe2 (3), o-Me2NC6H4SiMe3 (4) and p-Me2NC6H4SiMe3 (5)), recently developed to be 'benign by design' based on their readily degradable core structure. Five different degradability tests were performed, one assessing hydrolytic and two analysing biological and photolytic stability, respectively. All substances, except (p-MeOC6H4)2SiMe2 (3), hydrolysed within 24 h to 50% indicating that this is one of the major pathways of their primary elimination. In agreement with previous research, none of the substances was readily biodegradable. In contrast, 100% of p-Me2NC6H4SiMe3 (5) was primarily eliminated by photolytic and hydrolytic processes. The elimination rates of the other substances ranged from 7% to 64%. Irradiation at shorter wavelengths increased both the extent and speed of photodegradation. Eleven transformation products of p-Me2NC6H4SiMe3 (5) were detected, all of which were completely eliminated within 64 min of irradiation with a Hg lamp (200-400 nm). The insertion of an electron-donating group on the benzene ring like in p-Me2NC6H4SiMe3 (5) clearly enhanced photolytic degradability but further research is necessary to achieve truly biodegradable silicones.
Subject(s)
Environmental Pollutants , Organosilicon Compounds , Aerobiosis , Biodegradation, Environmental , Environmental Pollutants/chemistry , Environmental Pollutants/metabolism , Environmental Pollutants/radiation effects , Hydrogen-Ion Concentration , Hydrolysis , Light , Molecular Structure , Organosilicon Compounds/chemistry , Organosilicon Compounds/metabolism , Organosilicon Compounds/radiation effects , PhotolysisABSTRACT
This study investigates the geometric and electronic properties of selected BFRs in their ground (S0) and first singlet excited (S1) states deploying methods of the density functional theory (DFT) and the time-dependent density functional theory (TDDFT). We estimate the effect of the S0â S1 transition on the elongations of the C-Br bond, identify the frontier molecular orbitals involved in the excitation process and compute partial atomic charges for the most photoreactive bromine atoms. The bromine atom attached to an ortho position in HBB (with regard to C-C bond; 2,2',4,4',6,6'-hexabromobiphenyl), TBBA (with respect to the hydroxyl group; 2,2',6,6'-tetrabromobisphenol A), HBDE and BTBPE (in reference to C-O linkage; 2,2',4,4',6,6'-hexabromodiphenylether and 1,2-bis(2,4,6-tribromophenoxy)ethane, respectively) bears the highest positive atomic charge. This suggests that, these positions undergo reductive debromination reactions to produce lower brominated molecules. Debromination reactions ensue primarily in the aromatic compounds substituted with the highest number of bromine atoms owing to the largest stretching of the C-Br bond in the first excited state. The analysis of the frontier molecular orbitals indicates that, excitations of BFRs proceed via πâπ*, or πâσ* or nâσ* electronic transitions. The orbital analysis reveals that, the HOMO-LUMO energy gap (EH-L) for all investigated bromine-substituted aromatic molecules falls lower (1.85-4.91 eV) than for their non-brominated analogues (3.39-8.07 eV), in both aqueous and gaseous media. The excitation energies correlate with the EH-L values. The excitation energies and EH-L values display a linear negative correlation with the number of bromine atoms attached to the molecule. Spectral analysis of the gaseous-phase systems reveals that, the highly brominated aromatics endure lower excitation energies and exhibit red shifts of their absorption bands in comparison to their lower brominated congeners. We attained a satisfactory agreement between the experimentally measured absorption peak (λmax) and the theoretically predicted oscillator strength (λmax) for the UV-Vis spectra. This study further confirms that, halogenated aromatics only absorb light in the UV spectral region and that effective photodegradation of these pollutants requires the presence of photocatalysts.
Subject(s)
Environmental Pollutants/analysis , Flame Retardants/analysis , Models, Theoretical , Photolysis , Polybrominated Biphenyls/analysis , Ultraviolet Rays , Environmental Pollutants/radiation effects , Flame Retardants/radiation effects , Polybrominated Biphenyls/radiation effectsABSTRACT
In this study, Pd-BiVO4 bearing highly dispersed Pd nanoparticles was prepared from pure BiVO4 using an impregnation method. The pure BiVO4 and Pd-BiVO4 catalysts were characterized by X-ray diffraction, scanning electron microscopy, UV-visible diffuse reflection, transmission electron microscopy, and X-ray photoelectron spectroscopy. The results showed that the prepared catalysts had a monoclinic scheelite structure and exhibited a flake-like morphology. Pd-BiVO4 showed a distinct response in the visible light region, with an extended absorption edge at 550â¯nm. According to the Scherrer formula, the nanocrystal particle sizes of the BiVO4 and Pd-BiVO4 catalysts were 35 and 28â¯nm, respectively. Highly dispersed Pd nanoparticles with sizes of 2.5⯱â¯0.5â¯nm were observed on the BiVO4 surface. Two Pd valence states, Pd(II) and Pd(0), were identified in a 2:1 ratio. Pd-BiVO4 exhibited excellent activity for paracetamol (PCT) degradation, with 100% removal achieved in 1â¯h under visible light irradiation. During degradation, the mineralization ratio reached up to 40% total organic carbon removal. Two highly active species, namely, hydroxyl and superoxide radicals, were determined by electron spin resonance (ESR). Furthermore, the potential degradation of PCT in this system was proposed based on intermediate information obtained using HPLC-MS and Gauss analysis. The high dispersion and small size of Pd nanoparticles might favor the removal of emerging contaminants using the Pd-BiVO4 photocatalytic system.
Subject(s)
Acetaminophen/radiation effects , Environmental Pollutants/chemistry , Light , Metal Nanoparticles/chemistry , Palladium/chemistry , Photolysis/radiation effects , Vanadates/chemistry , Acetaminophen/chemistry , Bismuth/chemistry , Catalysis , Environmental Pollutants/radiation effects , Free Radicals/chemistry , Microscopy, Electron , Photolysis/drug effects , Spectrum AnalysisABSTRACT
Industrial effluents often contain mixed metal ions and dyes, and it is difficult to efficiently remove both types of contaminants simultaneously. Here, MIL-125-NH2@Ag/AgCl composites were for the first time developed through a facile deposition-photoreduction method for simultaneously removing Cr(VI)/Rhodamine B (RhB)/Malachite Green (MG) ternary system pollutants under visible-light irradiation. The capacities of Cr(VI) reduction dramatically increased to 98.4% in the coexistence of RhB and MG compared to that of binary (Cr(VI)/RhB (69.6%) or Cr(VI)/MG (67.5%)) and single Cr(VI) (29%) systems. In the meantime, the degradation efficiencies of dyes especially RhB in the ternary system were also improved compared to that of their individual systems. On the grounds of all the experimental results, it can be concluded that the efficient light-harvesting and electrons migration in MIL-125-NH2@Ag/AgCl and the synergistic effect of redox reactions between Cr(VI) and dyes hinder the recombination of photo-induced electron-hole pairs, which are responsible for their high photocatalytic activity to eliminate the mixed pollutants. This study provides a new route to construct high-performance photocatalysts for the practical treatment of wastewater containing mixed pollutants.
Subject(s)
Chromium , Coloring Agents , Environmental Pollutants , Light , Photolysis , Catalysis , Chromium/isolation & purification , Coloring Agents/isolation & purification , Coloring Agents/radiation effects , Environmental Pollutants/isolation & purification , Environmental Pollutants/radiation effects , Industrial Waste , Oxidation-Reduction , Photolysis/drug effects , Rhodamines/isolation & purification , Rhodamines/radiation effects , Rosaniline Dyes/isolation & purification , Rosaniline Dyes/radiation effects , Water Purification/methodsABSTRACT
A uniformly distributed mesoporous silica nanospheres has been successfully synthesized. Silica nanospheres have been loaded with different content of Fe2O3 nanoparticles synthesized by the sol-gel process followed by calcination to form the Fe2O3 supported on silica nanospheres composite. The as-synthesized photocatalyst has been characterized for crystal structure, morphology, stability, surface area and also surface composition was determined. The photocatalytic oxidation ability of the composite photocatalyst was evaluated by degrading aqueous solutions of Methylene Blue and Congo red dyes under visible light having intense absorption in the wavelength range between 550 and 560â¯nm. The prime significance of silica is to act as catalyst support for uniform distribution of hematite particles for enhanced catalytic reactivity. Highest degradation has been achieved with 20â¯wt % loading of hematite nanoparticles indicating the less agglomeration and availability of more catalytic sites. Furthermore, colorless organic pollutants 2-chlorophenol and 2, 4-dichlorophenol have been degraded with high efficiency in the presence of H2O2 oxidizer. The scavenger experiments confirmed that hydroxyl radicals are the majorly participating species in this catalytic system. The composite system also shows good recyclability of the materials and advocates the promising nature of the designed system for multiple hazardous environmental contaminants.
Subject(s)
Environmental Pollutants/radiation effects , Ferric Compounds/chemistry , Nanospheres/chemistry , Silicon Dioxide/chemistry , Catalysis , Chlorophenols/chemistry , Chlorophenols/radiation effects , Coloring Agents/chemistry , Coloring Agents/radiation effects , Environmental Pollutants/chemistry , Kinetics , Light , Photolysis , PorosityABSTRACT
WO3@MoS2/Ag (HW@MA) hollow tubes were successfully engineered to photodegrade bisphenol A (BPA) combined with peroxymonosulfate (PMS) for the first time. XRD, XPS, TEM and SEM were conducted. The HW@MA tubes present excellent photocatalytic performance on the removal of BPA. The intermediate products of BPA were investigated by GC-MS analysis and the degradation pathway was proposed. To explore the transferred mechanism of photoproduced carriers, the electron paramagnetic resonance (EPR) technique was carried out. The results revealed that the superoxide radical (O2-), hydroxyl radical (OH), sulfate radical (SO4-) were the main active radicals. Moreover, the formed schottky junctions enhanced the separation efficiency of photoinduced electron-hole pairs. Besides, the effect of the photocatalysts' dosage, PMS concentration, pH of the initial solution and co-existing anions on the BPA degradation were investigated.
Subject(s)
Benzhydryl Compounds/analysis , Disulfides/chemistry , Environmental Pollutants/analysis , Molybdenum/chemistry , Nanotubes/chemistry , Oxides/chemistry , Peroxides/chemistry , Phenols/analysis , Photolysis , Silver/chemistry , Benzhydryl Compounds/radiation effects , Catalysis , Environmental Pollutants/radiation effects , Light , Oxidation-Reduction , Phenols/radiation effects , Surface PropertiesABSTRACT
Irradiance reference spectra are used to calculate environmentally relevant photodegradation half-lives, but the currently used spectra were originally published in the 1980s with limited validation. The goal of this work is to provide updated irradiance reference spectra using the Simple Model of the Atmospheric Radiative Transfer of Sunshine (SMARTS). The SMARTS irradiance spectra were validated against measurements from several high-resolution spectroradiometers, and the updated irradiance reference spectra use current measurements for atmospheric species that can affect the irradiance that reaches the Earth's surface. These updated irradiance spectra are provided in 1 nm increments from 280 to 800 nm for 0° to 70° latitude at 10° increments in both the northern and southern hemisphere. Lastly, the influence of the input parameters on the modeled irradiance spectra was investigated. This work will allow users to calculate more accurate photodegradation half-lives using the updated irradiance reference spectra, and it also provides insight for users to calculate their own location- and time-specific irradiance spectra using SMARTS.
Subject(s)
Environmental Monitoring/methods , Environmental Pollutants/radiation effects , Models, Theoretical , Photolysis , Solar Energy , Sunlight , Half-LifeABSTRACT
Microwave electrodeless discharge lamp (MEDL) has been regarded as a powerful light source of photoreaction. Four kinds of chemicals, nitrogen (N2), oxygen (O2), water (H2O) and dimethyl sulfide (DMS), were used as molecular probes to explore the generation process of reactive oxygen species (ROS) and their photo-oxidation performances on the photodegradation of organic pollutants with application of an exterior MEDL system. ROS such as O (3P), O3, O (1D) and 1O2 were generated via irradiation of O2 and H2O except dry N2 by MEDL. They were transformed to other ROS including ·OH and H2O2 with increase of relative humidity. The ROS productivity was inhibited evidently by humidity and ·OH became the major active species at high humidity. An optimal mineralization rate of 23.6% for DMS photodegradation was reached in dry air compared with 8.74% at high humidity, which indicated that O (1D) and 1O2 were more powerful oxidants than O3 and OH. The results showed that the higher mineralization rate of organic pollutants was obtained by increasing the generation efficiency of ROS of O (1D) and 1O2. Furthermore, the results provided an alternative to develop intensification technology on photodegadation of organic pollutants with MEDL system and an optimal operation process including photocatalyst and humidity.
Subject(s)
Environmental Pollutants/radiation effects , Microwaves/adverse effects , Photolysis , Reactive Oxygen Species/chemistry , Sulfides/chemistry , Hydrogen Peroxide , Oxidation-Reduction , Oxygen/chemistryABSTRACT
The efficiency of advanced oxidation processes (AOPs) for disposing of non-steroidal anti-inflammatory drugs (NSAIDs) has been widely studied, but the environmental fates and effects of the NSAIDs and their degradation products (DPs) are poorly understood. In this study, the efficiency of ultraviolet light/Na2S2O8 (UV/PS) in degrading three NSAIDs-diclofenac, naproxen, and ibuprofen-and the toxicity of their DPs on Cyprinus carpio (C. carpio) was investigated. Results showed that the three NSAIDs can be completely removed (removal rate > 99.9%) by UV/PS, while the mineralization rate of the NSAIDs was only 28%. When C. carpio were exposed to 0.1 µM NSAIDs, 10 µM persulfate (PS), and 0.1 µM DPs of the NSAIDs for 96 h, respectively, the toxicity effects are as the NSAID DPs > PS > NSAIDs. Research results into the time-dependent effect of NSAID DPs on C. carpio demonstrated that obvious toxicity effects were observed in the first 48 hours, and the toxicity effects strengthened over time. NSAID DPs may have more severe toxicity effects than NSAIDs on C. carpio; therefore, the operating conditions of UV/PS must be optimized to eliminate the ecotoxicity of DPs.
Subject(s)
Anti-Inflammatory Agents, Non-Steroidal/toxicity , Carps , Environmental Pollutants/toxicity , Fish Diseases/prevention & control , Water Purification/methods , Animals , Anti-Inflammatory Agents, Non-Steroidal/chemistry , Diclofenac/chemistry , Diclofenac/radiation effects , Diclofenac/toxicity , Ecological Parameter Monitoring , Environmental Pollutants/chemistry , Environmental Pollutants/radiation effects , Environmental Pollution/prevention & control , Fish Diseases/chemically induced , Ibuprofen/chemistry , Ibuprofen/radiation effects , Ibuprofen/toxicity , Medical Waste Disposal , Naproxen/chemistry , Naproxen/radiation effects , Naproxen/toxicity , Oxidation-Reduction , Photolysis/drug effects , Photolysis/radiation effects , Sodium Compounds/chemistry , Sulfates/chemistry , Toxicity Tests, Acute , Ultraviolet Rays , Wastewater/chemistry , Wastewater/toxicityABSTRACT
The number of publications on photocatalytic bismuth vanadate-based materials is constantly increasing. Indeed, bismuth vanadate is gaining stronger interest in the photochemical community since it is a solar-driven photocatalyst. However, the efficiency of BiVO4-based photocatalyst under sunlight is questionable: in most of the studies investigating the photodegradation of organic pollutants, only few works identify the by-products and evaluate the real efficiency of BiVO4-based materials. This short review aims to (i) present briefly the principles of photocatalysis and define the photocatalytic efficiency and (ii) discuss the formation of reactive species involved in the photocatalytic degradation process of pollutants and thus the corresponding photodegradation mechanism could be determined. All these points are developed in a comprehensive discussion by focusing especially on pure, doped, and composite BiVO4. Therefore, this review exhibits a critical overview on different BiVO4-based photocatalytic systems with their real efficiency. This is a necessary knowledge for potential implementation of BiVO4 materials in environmental applications at larger scale than laboratory conditions.
Subject(s)
Bismuth/chemistry , Environmental Pollutants/chemistry , Photolysis , Semiconductors , Sunlight , Vanadates/chemistry , Environmental Pollutants/radiation effects , Reactive Oxygen Species , Vanadates/radiation effectsABSTRACT
Biosynthesised nanocomposites have attracted growing interests attributed to their 'green' synthesis nature in recent years. Shewanella oneidensis MR-1, a dissimilatory metal-reducing bacterium, was used to reduce palladium (II) nitrate to palladium (0) nanoparticles (Pd NPs) under anaerobic conditions, resulting in the in situ formation of Pd NPs immobilised on TiO2 nanotubes (TNTs) (Pd/TNTs nanocomposites). The Pd/TNTs nanocomposites were characterised by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray, and electron spin resonance, respectively. The results indicated that Pd NPs are successfully grown on the TNTs without aggregation. Photocatalytic degradation of methylene blue (MB) by Pd/TNTs nanocomposites under simulated sunlight was also investigated. Pd/TNTs nanocomposites had photocatalytic efficiency superior to that of single TiO2 nanomaterials. The photocatalytic activity of Pd/TNTs nanocomposites can be enhanced by S. oneidensis MR-1. The results showed that after only 10â min, the degradation ratio of MB reached 98.7% by Pd/TNTs nanocomposites when simultaneously assisted with S. oneidensis MR-1.
Subject(s)
Green Chemistry Technology/methods , Metal Nanoparticles/chemistry , Methylene Blue/chemistry , Palladium/chemistry , Shewanella/metabolism , Biodegradation, Environmental , Environmental Pollutants/chemistry , Environmental Pollutants/metabolism , Environmental Pollutants/radiation effects , Methylene Blue/metabolism , Methylene Blue/radiation effects , Palladium/metabolism , Photolysis , Titanium/chemistryABSTRACT
Currently, photodegradation has been proven to be an important way of eliminating polybrominated diphenyl ethers (PBDEs) from the environment. However, the mechanism of PBDE photodegradation in surfactants by UV light is still unclear. In this study, 2,4,4'-tribrominated diphenyl ether (BDE-28) was selected as the target pollutant to investigate the photodegradation of PBDEs in Triton X-100 (TX-100), sodium dodecylbenzenesulfonate (SDBS) and cetyltrimethylammonium bromide (CTAB) solutions. All photolysis experiments were performed above the critical micelle concentration (CMC). The results showed that photodebromination was the major pathway of BDE-28 photodestruction in different surfactants. From 1.5 CMC to 4 CMC, the photodegradation rates of BDE-28 increased as the concentration of TX-100 increased, and the increased concentration of SDBS has a negative effect on the photodegradation rate of BDE-28 due to the light barrier of SDBS. There was no obvious change in the case of CTAB. BDE-28 was debrominated to 4,4'-dibrominated diphenyl ether (BDE-15), 4-dibrominated diphenyl ether (BDE-3) and diphenyl ether (DE), subsequently. In addition, 2,8-dibrominated dibenzofuran (2,8-BDF), 2-monobrominated dibenzofuran (2-monoBDF), and dibenzofuran (DF) were produced via an intramolecular elimination of HBr from the PBDEs that had an ortho-bromine substituent. Moreover, DF can also be formed from DE and the generated amount of DF in CTAB was higher than that generated in SDBS and TX-100. We have also detected ortho-hydroxydiphenyl and para-hydroxydiphenyl during the photodegradation process.
Subject(s)
Environmental Pollutants/radiation effects , Models, Theoretical , Photolysis , Polybrominated Biphenyls/radiation effects , Surface-Active Agents/chemistry , Ultraviolet Rays , Environmental Pollutants/analysis , Environmental Restoration and Remediation , Kinetics , Oxidation-Reduction , Polybrominated Biphenyls/analysis , SolutionsABSTRACT
The phototransformation and environmental implications of graphene oxide (GO) have been widely studied in order to understand its implications upon release into the environment. However, very little is known about the formation of reactive oxygen species (ROS) by GO under solar irradiation. Currently there are no studies on the mechanism of ROS formation by GO or the amount of ROS catalyzed by the nanomaterials in the environment. In this study, we carefully investigated the different types and formation mechanisms of ROS generated by GO in the presence of simulated solar irradiation. The effect of GO's photoactivity on bisphenol A (BPA), a representative organic co-pollutant, was also studied. The conduction band electron (eaq-) of GO led to the formation of different ROS including OH, O2-, and 1O2. Among the three types of ROS investigated, O2- was the most abundant species generated during simulated solar irradiation of GO. BPA was degraded, mainly due to the oxidative potential of the valence band holes produced during solar irradiation of GO. This study advances understanding of the photoactivity of GO and its potential impact on other possible environmental co-pollutants.
Subject(s)
Benzhydryl Compounds/chemistry , Graphite/chemistry , Oxides/chemistry , Phenols/chemistry , Reactive Oxygen Species/chemical synthesis , Water/chemistry , Catalysis , Environmental Pollutants/radiation effects , Graphite/radiation effects , Nanostructures/chemistry , Oxidation-Reduction , Oxides/radiation effectsABSTRACT
Polyetherimide-graphitic carbon nitride (PEI-g-C3N4) floating photocatalyst has been synthesized by using polyetherimide (PEI) as linker to bind graphitic carbon nitride (g-C3N4) together. XRD and XPS analysis for PEI-g-C3N4 show that the interaction between PEI and g-C3N4 does not disturb the structure of g-C3N4. FTIR, TEM and theoretical results suggest that the long chain PEI binds g-C3N4 particles together to form PEI-g-C3N4 via hydrogen bonding interaction. Based on photodegradation results of methyl orange (MO), PEI can not photodegrade MO and just works as linker in PEI-g-C3N4, while the photodegradation performance of PEI-g-C3N4 is from the contribution of g-C3N4. Total organic carbon (TOC) analysis show that nearly 47% organic carbon has been converted into inorganic carbon after photodegradation, suggesting that PEI-g-C3N4 can destroy both NN bond and aromatic rings in MO under light irradiation. The photodegradation efficiency (91%) of MO by g-C3N4 is higher than that (80%) by PEI-g-C3N4 with stirring. But, the photodegradation efficiency (37%) of MO by g-C3N4 is lower than that (55%) by PEI-g-C3N4 without stirring. This is the advantage of floating photocatalyst with respect to the powder photocatalyst since the former can utilize more solar energy than the latter when stirring is not available.
Subject(s)
Azo Compounds/radiation effects , Environmental Pollutants/radiation effects , Graphite/chemistry , Nitriles/chemistry , Photolysis/radiation effects , Polymers/chemistry , Azo Compounds/chemistry , Catalysis , Light , Photochemical Processes/radiation effectsABSTRACT
We investigated a sequential photocatalysis-dark reaction, wherein organic pollutants were degraded on Ag/TiO2 under UV irradiation and the dark reduction of hexavalent chromium (Cr(VI)) was subsequently followed. The photocatalytic oxidation of 4-chlorophenol (4-CP), a test organic substrate, induced the generation of degradation intermediates and the storage of electrons in Ag/TiO2 which were then utilized for reducing Cr(VI) in the postirradiation period. The dark reduction efficiency of Cr(VI) was much higher with Ag/TiO2 (87%), compared with bare TiO2 (27%) and Pt/TiO2 (22%). The Cr(VI) removal by Ag/TiO2 (87%) was contributed by adsorption (31%), chemical reduction by intermediates of 4-CP degradation (26%), and reduction by electrons stored in Ag (30%). When formic acid, humic acid or ethanol was used as an alternative organic substrate, the electron storage effect was also observed. The postirradiation removal of Cr(VI) on Ag/TiO2 continued for hours, which is consistent with the observation that a residual potential persisted on the Ag/TiO2 electrode in the dark whereas little residual potential was observed on bare TiO2 and Pt/TiO2 electrodes. The stored electrons in Ag/TiO2 and their transfer to Cr(VI) were also indicated by the UV-visible absorption spectral change. Moreover, the electrons stored in the preirradiated Ag/TiO2 reacted with O2 with showing a sign of low-level OH radical generation in the dark period.
Subject(s)
Environmental Pollutants , Adsorption , Catalysis , Chromium , Environmental Pollutants/chemistry , Environmental Pollutants/radiation effects , Humic Substances , Oxidation-Reduction , Titanium , Ultraviolet RaysABSTRACT
AgCl and Ag2S prevalently exist in the environment as minerals and/or the chlorination and sulfidation products of ionic silver and elemental silver nanoparticles (AgNPs). In this work, we investigated the chemical transformation of AgCl and Ag2S under simulated sunlight (in water) and incineration (in sludge and simulated municipal solid waste, SMSW). In the presence of natural organic matter, AgCl in river water was observed to be transformed into AgNPs under simulated sunlight, while photo-reduction of Ag2S could not take place under the same experimental conditions. During the course of incineration, pure Ag2S was transformed into elemental silver while AgCl remained stable; however, both Ag2S in sludge and AgCl in SMSW can be transformed to elemental silver under incineration, evident by the results of X-ray absorption spectroscopy and scanning electron microscopy measurements. Incineration temperature played an important role in the transformation of Ag2S and AgCl into elemental silver. These results suggest that chemical transformations of Ag2S and AgCl into elemental silver could be a possible source of naturally occurring or unintentionally produced AgNPs, affecting the fate, transport, bioavailability and toxicity of silver. Therefore, it is necessary to include the contributions of this transformation process when assessing the risk of ionic silver/AgNPs and the utilization and management of incineration residues.
Subject(s)
Environmental Pollutants/chemistry , Silver Compounds/chemistry , Environmental Pollutants/radiation effects , Fresh Water , Incineration , Metal Nanoparticles/chemistry , Microscopy, Electron, Scanning , Silver/chemistry , Silver Compounds/radiation effects , Solid Waste , Sunlight , Temperature , X-Ray Absorption SpectroscopyABSTRACT
Tetrabromobisphenol A, one of the most important brominated retardants, is an typical persistent organic pollutant and it is of great value to develop rapid and effective degradation method. Present study established a photoelectrodegradation method with CeO2 and reduced graphene oxide co-modified TiO2 nanotube arrays (RGO-CeO2-TiO2 NAs), which were successfully synthesized and characterized with scanning electron microscopy (SEM) and Energy Dispersive X Ray Spectrometry (EDX). The SEM Images revealed that the nanotubes had a diameter of about 100 nm and an obvious layer of CeO2 and RGO on the surface of TiO2 nanotube arrays. The EDX data exhibited the presence of Ce element. The results demonstrated that TBBPA was degraded at a high degradation rate constant of 0.0191 min-1, and photogenerated holes played a major role in the degradation reaction. Significant decrease of degradation efficiency was achieved with the presence of EDTA-2Na(hole scavenger), yet while the existence of t-BuOH(OH scavenger) resulted in less inhibition on the degradation. Besides, RGO-CeO2-TiO2 NAs exhibited good stability with rarely decline of degradation efficiency for ten reused runs. All these indicated that RGO-CeO2-TiO2 NAs were a good catalyst with extraordinary catalytic activity and stability for PEC degradation, and would have great potential in the control and removal of pollutants.
Subject(s)
Cerium/chemistry , Environmental Pollutants/analysis , Graphite/chemistry , Light , Nanotubes/chemistry , Polybrominated Biphenyls/analysis , Titanium/chemistry , Catalysis , Electrodes , Environmental Pollutants/chemistry , Environmental Pollutants/radiation effects , Environmental Restoration and Remediation , Microscopy, Electron, Scanning , Models, Theoretical , Oxides/chemistry , Photochemical Processes , Polybrominated Biphenyls/chemistry , Polybrominated Biphenyls/radiation effectsABSTRACT
Water dispersible, highly efficient nickel doped CdS nanoparticles anchored on graphene nanosheets as a photocatalyst for cephalexin and sulfamethoxazole photodegradation have been prepared in a facile microwave-furnace assisted method. Each one of the two modifications has played a critical role in nanocomposite functioning. Defects originated by dopant boosted the lifetime of carriers and thereupon graphene matrix transferred them to contribute effectively the photocatalytic process. Characterization results revealed the formation of monocrystalline hexagonal phase of all products and that both doping and loading on graphene have red-shifted the absorption edge of CdS towards the visible light region. Furthermore, FTIR confirmed the successful reduction of graphene oxide by the subsequent preparation steps. Adsorption isotherms revealed the role of graphene in enhancing substrate adsorption. Nevertheless, dissimilar pathways of catalytic degradation were observed on the doped composite as cephalexin oxidation was principally mediated by the hole-hydroxyl radical mechanism, sulfamethoxazole oxidation favored the superoxide radical mechanism. This composite has shown, however, a high photostability and minimized ions release of the composite.