Expression of a ß-glucosidase from Trichoderma reesei in Escherichia coli using a synthetic optimized gene and stability improvements by immobilization using magnetite nano-support.

The enzymatic conversion of lignocellulosic biomass to fermentable sugars is determined by the enzymatic activity of cellulases; consequently, improving enzymatic activity has attracted great interest in the scientific community. Cocktails of commercial cellulase often have low ß-glucosidase content, leading to the accumulation of cellobiose. This accumulation inhibits the activity of the cellulolytic complex and can be used to determine the enzymatic efficiency of commercial cellulase cocktails. Here, a novel codon optimized ß-glucosidase gene (B-glusy) from Trichoderma reesei QM6a was cloned and expressed in three strains of Escherichia coli (E. coli). The synthetic sequence containing an open reading frame (ORF) of 1491 bp was used to encode a polypeptide of 497 amino acid residues. The ß-glucosidase recombinant protein that was expressed (57 kDa of molecular weight) was purified by Ni agarose affinity chromatography and visualized by SDS-PAGE. The recombinant protein was better expressed in E. coli BL21 (DE3), and its enzymatic activity was higher at neutral pH and 30 °C (22.4 U/mg). Subsequently, the ß-glucosidase was immobilized using magnetite nano-support, after which it maintained >65% of its enzymatic activity from pH 6 to 10, and was more stable than the free enzyme above 40 °C. The maximum immobilization yield had enzyme activity of 97.2%. In conclusion, ß-glucosidase is efficiently expressed in the microbial strain E. coli BL21 (DE3) grown in a simplified culture medium.

Lipase Immobilization on Silica Xerogel Treated with Protic Ionic Liquid and its Application in Biodiesel Production from Different Oils.

Treated silica xerogel with protic ionic liquid (PIL) and bifunctional agents (glutaraldehyde and epichlorohydrin) is a novel support strategy used in the effective immobilization of lipase from Burkholderia cepacia (LBC) by covalent binding. As biocatalysts with the highest activity recovery yields, LBC immobilized by covalent binding with epichlorohydrin without (203%) and with PIL (250%), was assessed by the following the hydrolysis reaction of olive oil and characterized biochemically (Michaelis⁻Menten constant, optimum pH and temperature, and operational stability). Further, the potential transesterification activity for three substrates: sunflower, soybean, and colza oils, was also determined, achieving a conversion of ethyl esters between 70 and 98%. The supports and the immobilized lipase systems were characterized using Fourier transform infrared spectra (FTIR), scanning electron microscopy (SEM), elemental analysis, and thermogravimetric (TG) analysis.

Synthesis of Benzyl Acetate Catalyzed by Lipase Immobilized in Nontoxic Chitosan-Polyphosphate Beads.

Enzymes serve as biocatalysts for innumerable important reactions, however, their application has limitations, which can in many cases be overcome by using appropriate immobilization strategies. Here, a new support for immobilizing enzymes is proposed. This hybrid organic-inorganic support is composed of chitosan-a natural, nontoxic, biodegradable, and edible biopolymer-and sodium polyphosphate as the inorganic component. Lipase B from Candida antarctica (CALB) was immobilized on microspheres by encapsulation using these polymers. The characterization of the composites (by infrared spectroscopy, thermogravimetric analysis, and confocal Raman microscopy) confirmed the hybrid nature of the support, whose external part consisted of polyphosphate and core was composed of chitosan. The immobilized enzyme had the following advantages: possibility of enzyme reuse, easy biocatalyst recovery, increased resistance to variations in temperature (activity declined from 60 °C and the enzyme was inactivated at 80 °C), and increased catalytic activity in the transesterification reactions. The encapsulated enzymes were utilized as biocatalysts for transesterification reactions to produce the compound responsible for the aroma of jasmine.

Solanum melongena polyphenol oxidase biosensor for the electrochemical analysis of paracetamol.

A new strategy for the construction of a polyphenol oxidase carbon paste biosensor for paracetamol detection is reported. The eggplant (Solanum melongena) was processed to collect the polyphenol oxidase as an enzyme that was incorporated in the carbon paste sensor construction. The constructed sensor displayed high sensitivity and good selection for paracetamol detection and recognition. Optimized conditions included pH 6.0 (highest activity), pH 7.0 (highest stability), pulse amplitude of 50 mV, and 15% of vegetable extract per carbon paste. The sensor displayed a linear range from 20 to 200 µM, with a detection limit of 5 µM. Application of the sensor to paracetamol determination in tablet and oral solutions have shown satisfactory results. The efficiency of the method showed very good repeatability ranging between 1.26 and 1.72% relative standard deviation for interday analysis, while recoveries for paracetamol varied between 97.5 and 99.8% for the voltammetric determination. The strategy for a simple, low cost, and efficient eggplant polyphenol oxidase sensor showcased in this work provides an opportunity for the detection of other phenolic compounds in various matrices.

Strategies for the one-step immobilization-purification of enzymes as industrial biocatalysts.

In this review, we detail the efforts performed to couple the purification and the immobilization of industrial enzymes in a single step. The use of antibodies, the development of specific domains with affinity for some specific supports will be revised. Moreover, we will discuss the use of domains that increase the affinity for standard matrices (ionic exchangers, silicates). We will show how the control of the immobilization conditions may convert some unspecific supports in largely specific ones. The development of tailor-made heterofunctional supports as a tool to immobilize-stabilize-purify some proteins will be discussed in deep, using low concentration of adsorbent groups and a dense layer of groups able to give an intense multipoint covalent attachment. The final coupling of mutagenesis and tailor made supports will be the last part of the review.

Small GTPases in acrosomal exocytosis.

Regulated exocytosis employs a conserved molecular machinery in all secretory cells. Soluble N-ethylmaleimide-sensitive factor attachment protein receptor (SNARE) and Rab superfamilies are members of this machinery. Rab proteins are small GTPases that organize membrane microdomains on organelles by recruiting specific effectors that strongly influence the movement, fusion and fission dynamics of intracellular compartments. Rab3 and Rab27 are the prevalent exocytotic isoforms. Many events occur in mammalian spermatozoa before they can fertilize the egg, one of them is the acrosome reaction (AR), a type of regulated exocytosis. The AR relies on the same fusion machinery as all other cell types, which includes members of the exocytotic SNARE and Rab superfamilies. Here, we describe in depth two protocols designed to determine the activation status of small G proteins. One of them also serves to determine the subcellular localization of active Rabs, something not achievable with other methods. By means of these techniques, we have reported that Rab27 and Rab3 act sequentially and are organized in a RabGEF cascade during the AR. Although we developed them to scrutinize the exocytosis of the acrosome in human sperm, the protocols can potentially be extended to study other Ras-related proteins in virtually any cellular model.

Acidic proteases from Monterey sardine (Sardinops sagax caerulea) immobilized on shrimp waste chitin and chitosan supports: searching for a by-product catalytic system.

Solid wastes generated from the seafood industry represent an important environmental pollutant; therefore, utilization of those wastes for the development of processing biochemical tools could be an attractive and clean solution for the seafood industry. This study reports the immobilization of semi-purified acidic proteases from Monterey sardine stomachs onto chitin and chitosan materials extracted from shrimp head waste. Several supports (chitosan beads, chitosan flakes, and partially deacetylated flakes) were activated either with genipin or Na-tripolyphosphate and evaluated as a mean to immobilize acidic proteases. The protein load varied within the 67-91% range on different supports. The immobilization systems based on chitosan beads achieved the highest protein loads but showed the lowest retained catalytic activities. The best catalytic behavior was obtained using partially deacetylated chitin flakes activated either with genipin or Na-tripolyphosphate. According to results, the immobilization matrix structure, as well as acetylation degree of chitin-chitosan used, has considerable influence on the catalytic behavior of immobilized proteases. Partially deacetylated chitin flakes represent a suitable option as support for enzyme immobilization because its preparation requires fewer steps than other supports. Two abundant seafood by-products were used to obtain a catalytic system with enough proteolytic activity to be considered for biotechnological applications in diverse fields.

Heterofunctional supports in enzyme immobilization: from traditional immobilization protocols to opportunities in tuning enzyme properties.

A heterofunctional support for enzyme immobilization may be defined as that which possesses several distinct functionalities on its surface able to interact with a protein. We will focus on those supports in which a final covalent attachment between the enzyme and the support is achieved. Heterofunctionality sometimes has been featured in very old immobilization techniques, even though in many instances it has been overlooked, giving rise to some misunderstandings. In this respect, glutaraldehyde-activated supports are the oldest multifunctional supports. Their matrix has primary amino groups, the hydrophobic glutaraldehyde chain, and can covalently react with the primary amino groups of the enzyme. Thus, immobilization may start (first event of the immobilization) via different causes and may involve different positions of the enzyme surface depending on the activation degree and immobilization conditions. Other "classical" heterofunctional supports are epoxy commercial supports consisting of reactive covalent epoxy groups on a hydrophobic matrix. Immobilization is performed at high ionic strength to permit protein adsorption, so that covalent attachment may take place at a later stage. Starting from these old immobilization techniques, tailor-made heterofunctional supports have been designed to permit a stricter control of the enzyme immobilization process. The requirement is to find conditions where the main covalent reactive moieties may have very low reactivity toward the enzyme. In this Review we will discuss the suitable properties of the groups able to give the covalent attachment (intending a multipoint covalent attachment), and the groups able to produce the first enzyme adsorption on the support. Prospects, limitations, and likely pathways for the evolution (e.g., coupling of site-directed mutagenesis and thiol heterofunctional supports of enzyme immobilization on heterofunctional supports) will be discussed in this Review.

Immobilization of keratinolytic metalloprotease from Chryseobacterium sp. strain kr6 on glutaraldehyde-activated chitosan.

Keratinases are exciting keratin-degrading enzymes; however, there have been relatively few studies on their immobilization. A keratinolytic protease from Chryseobacterium sp. kr6 was purified and its partial sequence determined using mass spectrometry. No significant homology to other microbial peptides in the NCBI database was observed. Certain parameters for immobilization of the purified keratinase on chitosan beads were investigated. The production of the chitosan beads was optimized using factorial design and surface response techniques. The optimum chitosan bead production for protease immobilization was a 20 g/l chitosan solution in acetic acid [1.5% (v/v)], glutaraldehyde ranging from 34 g to 56 g/l, and an activation time between 6 and 10 h. Under these conditions, above 80% of the enzyme was immobilized on the support. The behavior of the keratinase loading on the chitosan beads surface was well described using the Langmuir model. The maximum capacity of the support (qm) and dissociation constant (Kd) were estimated as 58.8 U/g and 0.245 U/ml, respectively. The thermal stability of the immobilized enzyme was also improved around 2-fold, when compared with that of the free enzyme, after 30 min at 65 degrees C. In addition, the activity of the immobilized enzyme remained at 63.4% after it was reused five times. Thus, the immobilized enzyme exhibited an improved thermal stability and remained active after several uses.

Concentration, partial characterization, and immobilization of lipase extract from P. brevicompactum by solid-state fermentation of babassu cake and castor bean cake.

One relevant limitation hindering the industrial application of microbial lipases has been attributed to their production cost, which is determined by the production yield, enzyme stability among other. The objective of this work was to evaluate the concentration and immobilization of lipase extracts from Penicillium brevicompactum obtained by solid-state fermentation of babassu cake and castor bean cake. The precipitation with ammonium sulfate 60% of saturation of crude extract obtained with babassu cake as raw material showed an enhancement in hydrolytic and esterification activities from 31.82 to 227.57 U/g and from 170.92 to 207.40 U/g, respectively. Concentrated lipase extracts showed preference to medium-chain triglycerides and fatty acids. It is shown that the enzyme activity is maintained during storage at low temperatures (4 and -10°C) for up to 30 days. Higher esterification activities were achieved when the lipase extract was immobilized in sodium alginate and activated coal.

Characterization and application of tannase produced by Aspergillus niger ITCC 6514.07 on pomegranate rind

Extracellular tannase and gallic acid were produced optimally under submerged fermentation at 37 0C, 72 h, pH 5.0, 10 percent(v/v) inoculum and 4 percent(w/v) of the agroresidue pomegranate rind (PR) powder by an Aspergillus niger isolate. Tannic acid (1 percent) stimulated the enzyme production by 245.9 percent while with 0.5 percent glucose, increase was marginal. Tannase production was inhibited by gallic acid and nitrogen sources such as NH4NO3, NH4Cl, KNO3, asparatic acid, urea and EDTA. The partially purified enzyme showed temperature and pH optima of 35 0C and 6.2 respectively which shifted to 40 0C and 5.8 on immobilization in alginate beads. Activity of the enzyme was inhibited by Zn+2, Ca+, Mn+2, Mg+2, Ba+2and Ag+. The immobilized enzyme removed 68.8 percent tannin from juice of aonla/myrobalan (Phyllanthus emblica), a tropical fruit, rich in vitamin C and other essential nutrients. The enzymatic treatment of the juice with minimum reduction in vitamin C is encouraging as non enzymatic treatments of myrobalan juice results in vitamin C removal.

Expression, purification and immobilization of the intracellular invertase INVA, from Zymomonas mobilis on crystalline cellulose and Nylon-6.

This paper presents two immobilization methods for the intracellular invertase (INVA), from Zymomonas mobilis. In the first method, a chimeric protein containing the invertase INVA, fused through its C-terminus to CBDCex from Cellulomonas fimi was expressed in Escherichia coli strain BL21 (DE3). INVA was purified and immobilized on crystalline cellulose (Avicel) by means of affinity, in a single step. No changes were detected in optimal pH and temperature when INVA-CBD was immobilized on Avicel, where values of 5.5 and 30 degrees C, respectively, were registered. The kinetic parameters of the INVA-CBD fusion protein were determined in both its free form and when immobilized on Avicel. Km and Vmax were affected with immobilization, since both showed an increase of up to threefold. Additionally, we found that subsequent to immobilization, the INVA-CBD fusion protein was 39% more susceptible to substrate inhibition than INVA-CBD in its free form. The second method of immobilization was achieved by the expression of a 6xHis-tagged invertase purified on Ni-NTA resin, which was then immobilized on Nylon-6 by covalent binding. An optimal pH of 5.5 and a temperature of 30 degrees C were maintained, subsequent to immobilization on Nylon-6 as well as with immobilization on crystalline cellulose. The kinetic parameters relating to Vmax increased up to 5.7-fold, following immobilization, whereas Km increased up to 1.7-fold. The two methods were compared showing that when invertase was immobilized on Nylon-6, its activity was 1.9 times that when immobilized on cellulose for substrate concentrations ranging from 30 to 390 mM of sucrose.

Polyethylene glycol improves phenol removal by immobilized turnip peroxidase.

Purified peroxidase from turnip (Brassica napus L. var. esculenta D.C.) was immobilized by entrapment in spheres of calcium alginate and by covalent binding to Affi-Gel 10. Both immobilized Turnip peroxidase (TP) preparations were assayed for the detoxification of a synthetic phenolic solution and a real wastewater effluent from a local paints factory. The effectiveness of phenolic compounds (PC's) removal by oxidative polymerization was evaluated using batch and recycling processes, and in the presence and in the absence of polyethylene glycol (PEG). The presence of PEG enhances the operative TP stability. In addition, reaction times were reduced from 3h to 10 min, and more effective phenol removals were achieved when PEG was added. TP was able to perform 15 reaction cycles with a real industrial effluent showing PC's removals >90% PC's during the first 10 reaction cycles. High PC's removal efficiencies (>95%) were obtained using both immobilized preparations at PC's concentrations <1.2mM. Higher PC's concentrations decreased the removal efficiency to 90% with both preparations after the first reaction cycle, probably due to substrate inhibition. On the other hand, immobilized TP showed increased thermal stability when compared with free TP. A large-scale enzymatic process for industrial effluent treatment is expected to be developed with immobilized TP that could be stable enough to make the process economically feasible.

Purification, characterization and immobilization of proteinase inhibitors from Stichodactyla helianthus.

Isolation of proteinase inhibitors from the sea anemone Stichodactyla helianthus was achieved by trichloroacetic acid treatment of the aqueous extract followed by affinity chromatography on trypsin-Sepharose and ion-exchange chromatography on CM-cellulose. The average molecular mass of the major inhibitor (ShPI-I) obtained by fast atom bombardment mass spectrometry (FAB-MS) was 6110.6 Da. The amino acid sequence was determined by FAB-MS combined with manual Edman degradation, digestions with endopeptidases and exopeptidases and automatic sequencing. The sequence of ShPI-I (55 amino acids) was compared with those reported in the SwissProt database for several proteinase inhibitors and significant similarity to inhibitors belonging to the Kunitz family was observed. ShPI-I exhibits a broad specificity for serine, cysteine and aspartic proteinases. The dissociation constants of the complexes formed with different enzymes were determined. The affinity-purified fraction (PI) was immobilized on Sepharose and used in the purification of different classes of proteinases.

Periplasmic trehalase from Escherichia coli--characterization and immobilization on spherisorb.

1. Trehalase was partially purified from Escherichia coli and characterized. The Km for trehalose was 0.78 mM, the pH optimum 5.5 and the temperature optimum 30 degrees C. 2. Trehalase represented approximately 50% of the total protein released by osmotic shock. The preparation was free of nonspecific carbohydrate hydrolases, which act on sucrose, galactose and maltose, permitting trehalose determination in biological samples, such as insect hemolymph and free cell extracts among others. 3. The enzyme was stable in 50 mM maleate buffer, pH 6.2, at -8 degrees C for at least 6 months and could be used to determine trehalose in the range of 6 to 30 nmol. 4. Immobilization of the enzyme was achieved by covalent linkage to spherisorb-5NH2 (spherical silica gel). Retention of total catalytic activity averaged 32%. 5. The reactor, stored for one month at -5 degrees C, retained 98% of its initial immobilized activity. 6. This immobilized form of the enzyme could be used routinely for specific determinations of trehalose.

Periplasmic trehalase from Escherichia coli: characterization and immobilization on spherisorb

1. Trehalase was partially purified from Escherichia coli and characterized. The Km for trehalose was 0.78 mM, the pH optimum 5.5 and the temperature optimum 30 degrees C. 2. Trehalase represented approximately 50 per cent of the total protein released by osmotic shock. The preparation was free of nonspecific carbohydrate hydrolases, which act on sucrose, galactose and maltose, permitting trehalose determination in biological samples, such as insect hemolymph and free cell extracts among others. 3. The enzyme was stable in 50 mM maleate buffer, pH 6.2, at -8 degrees C for at least 6 months and could be used to determine trehalose in the range of 6 to 30 nmol. 4. Immobilization of the enzyme was achieved by covalent linkage to spherisorb-5NH2 (spherical silica gel). Retention of total catalytic activity averaged 32 per cent . 5. The reactor, stored for one month at -5 degrees C, retained 98 per cent of its initial immobilized activity. 6. This immobilized form of the enzyme could be used routinely for specific determinations of trehalose

IMP synthesis using immobilized adenosine (phosphate) deaminase.

Inosinic acid (IMP) has been prepared by the deamination of adenosine monophosphate (AMP) with an immobilized adenosine (phosphate) deaminase extracted from the snail Biomphalaria glabrata. The enzyme has been immobilized in polyacrylamide beads. The preparation and characterization of this system are described.