Preliminary Study on Effects of Neck Exoskeleton Structural Design in Patients With Amyotrophic Lateral Sclerosis.

Neck muscle weakness due to amyotrophic lateral sclerosis (ALS) can result in dropped head syndrome, adversely impacting the quality of life of those affected. Static neck collars are currently prescribed to hold the head in a fixed upright position. However, these braces are uncomfortable and do not allow any voluntary head-neck movements. By contrast, powered neck exoskeletons have the potential to enable head-neck movements. Our group has recently improved the mechanical structure of a state-of-the-art neck exoskeleton through a weighted optimization. To evaluate the effect of the structural changes, we conducted an experiment in which patients with ALS were asked to perform head-neck tracking tasks while using the two versions of the neck exoskeleton. We found that the neck muscle activation was significantly reduced when assisted by the structurally enhanced design compared to no assistance provided. The improved structure also improved kinematics tracking performance, allowing users to better achieve the desired head poses. In comparison, the previous design did not help reduce the muscle effort required to perform these tasks and even slightly worsened the kinematic tracking performance. It was also found that biomechanical benefits gained from using the structurally improved design were consistent across participants with both mild and severe neck weakness. Furthermore, we observed that participants preferred to use the powered neck exoskeletons to voluntarily move their heads and make eye contact during a conversation task rather than remain in a fixed upright position. Each of these findings highlights the importance of the structural design of neck exoskeletons in achieving desired biomechanical benefits and suggests that neck exoskeletons can be a viable method to improve the daily life of patients with ALS.

Gait Training-Based Motor Imagery and EEG Neurofeedback in Lokomat: A Clinical Intervention With Complete Spinal Cord Injury Individuals.

Robotic systems, such as Lokomat® have shown promising results in people with severe motor impairments, who suffered a stroke or other neurological damage. Robotic devices have also been used by people with more challenging damages, such as Spinal Cord Injury (SCI), using feedback strategies that provide information about the brain activity in real-time. This study proposes a novel Motor Imagery (MI)-based Electroencephalogram (EEG) Visual Neurofeedback (VNFB) system for Lokomat® to teach individuals how to modulate their own µ (8-12 Hz) and ß (15-20 Hz) rhythms during passive walking. Two individuals with complete SCI tested our VNFB system completing a total of 12 sessions, each on different days. For evaluation, clinical outcomes before and after the intervention and brain connectivity were analyzed. As findings, the sensitivity related to light touch and painful discrimination increased for both individuals. Furthermore, an improvement in neurogenic bladder and bowel functions was observed according to the American Spinal Injury Association Impairment Scale, Neurogenic Bladder Symptom Score, and Gastrointestinal Symptom Rating Scale. Moreover, brain connectivity between different EEG locations significantly ( [Formula: see text]) increased, mainly in the motor cortex. As other highlight, both SCI individuals enhanced their µ rhythm, suggesting motor learning. These results indicate that our gait training approach may have substantial clinical benefits in complete SCI individuals.

Exoskeleton-based exercises for overground gait and balance rehabilitation in spinal cord injury: a systematic review of dose and dosage parameters.

BACKGROUND: Exoskeletons are increasingly applied during overground gait and balance rehabilitation following neurological impairment, although optimal parameters for specific indications are yet to be established. OBJECTIVE: This systematic review aimed to identify dose and dosage of exoskeleton-based therapy protocols for overground locomotor training in spinal cord injury/disease. METHODS: A systematic review was conducted in accordance with the Preferred Reporting Items Systematic Reviews and Meta-Analyses guidelines. A literature search was performed using the CINAHL Complete, Embase, Emcare Nursing, Medline ALL, and Web of Science databases. Studies in adults with subacute and/or chronic spinal cord injury/disease were included if they reported (1) dose (e.g., single session duration and total number of sessions) and dosage (e.g., frequency of sessions/week and total duration of intervention) parameters, and (2) at least one gait and/or balance outcome measure. RESULTS: Of 2,108 studies identified, after removing duplicates and filtering for inclusion, 19 were selected and dose, dosage and efficacy were abstracted. Data revealed a great heterogeneity in dose, dosage, and indications, with overall recommendation of 60-min sessions delivered 3 times a week, for 9 weeks in 27 sessions. Specific protocols were also identified for functional restoration (60-min, 3 times a week, for 8 weeks/24 sessions) and cardiorespiratory rehabilitation (60-min, 3 times a week, for 12 weeks/36 sessions). CONCLUSION: This review provides evidence-based best practice recommendations for overground exoskeleton training among individuals with spinal cord injury/disease based on individual therapeutic goals - functional restoration or cardiorespiratory rehabilitation. There is a need for structured exoskeleton clinical translation studies based on standardized methods and common therapeutic outcomes.

Optimizing shoulder elevation assist rate in exoskeletal rehabilitation based on muscular activity indices: a clinical feasibility study.

BACKGROUND: Restoring shoulder function is critical for upper-extremity rehabilitation following a stroke. The complex musculoskeletal anatomy of the shoulder presents a challenge for safely assisting elevation movements through robotic interventions. The level of shoulder elevation assistance in rehabilitation is often based on clinical judgment. There is no standardized method for deriving an optimal level of assistance, underscoring the importance of addressing abnormal movements during shoulder elevation, such as abnormal synergies and compensatory actions. This study aimed to investigate the effectiveness and safety of a newly developed shoulder elevation exoskeleton robot by applying a novel optimization technique derived from the muscle synergy index. METHODS: Twelve chronic stroke participants underwent an intervention consisting of 100 robot-assisted shoulder elevation exercises (10 × 10 times, approximately 40 min) for 10 days (4-5 times/week). The optimal robot assist rate was derived by detecting the change points using the co-contraction index, calculated from electromyogram (EMG) data obtained from the anterior deltoid and biceps brachii muscles during shoulder elevation at the initial evaluation. The primary outcomes were the Fugl-Meyer assessment-upper extremity (FMA-UE) shoulder/elbow/forearm score, kinematic outcomes (maximum angle of voluntary shoulder flexion and elbow flexion ratio during shoulder elevation), and shoulder pain outcomes (pain-free passive shoulder flexion range of motion [ROM] and visual analogue scale for pain severity during shoulder flexion). The effectiveness and safety of robotic therapy were examined using the Wilcoxon signed-rank sum test. RESULTS: All 12 patients completed the procedure without any adverse events. Two participants were excluded from the analysis because the EMG of the biceps brachii was not obtained. Ten participants (five men and five women; mean age: 57.0 [5.5] years; mean FMA-UE total score: 18.7 [10.5] points) showed significant improvement in the FMA-UE shoulder/elbow/forearm score, kinematic outcomes, and pain-free passive shoulder flexion ROM (P < 0.05). The shoulder pain outcomes remained unchanged or improved in all patients. CONCLUSIONS: The study presents a method for deriving the optimal robotic assist rate. Rehabilitation using a shoulder robot based on this derived optimal assist rate showed the possibility of safely improving the upper-extremity function in patients with severe stroke in the chronic phase.

A patient-centered 'test-drive' strategy for ankle-foot orthosis prescription: Protocol for a randomized participant-blinded trial.

BACKGROUND: Ankle-foot orthoses (AFOs) are commonly used to overcome mobility limitations related to lower limb musculoskeletal injury. Despite a multitude of AFOs to choose from, there is scant evidence to guide AFO prescription and limited opportunities for AFO users to provide experiential input during the process. To address these limitations in the current prescription process, this study evaluates a novel, user-centered and personalized 'test-drive' strategy using a robotic exoskeleton ('AFO emulator') to emulate commercial AFO mechanical properties (i.e., stiffness). The study will determine if brief, in-lab trials (with emulated or actual AFOs) can predict longer term preference, satisfaction, and mobility outcomes after community trials (with the actual AFOs). Secondarily, it will compare the in-lab experience of walking between actual vs. emulated AFOs. METHODS AND ANALYSIS: In this participant-blinded, randomized crossover study we will recruit up to fifty-eight individuals with lower limb musculoskeletal injuries who currently use an AFO. Participants will walk on a treadmill with three actual AFOs and corresponding emulated AFOs for the "in-lab" assessments. For the community trial assessment, participants will wear each of the actual AFOs for a two-week period during activities of daily living. Performance-based and user-reported measures of preference and mobility will be compared between short- and long-term trials (i.e., in-lab vs. two-week community trials), and between in-lab trials (emulated vs. actual AFOs). TRIAL REGISTRATION: The study was prospectively registered at www.clininicaltrials.gov (Clinical Trials Study ID: NCT06113159). Date: November 1st 2023. https://classic.clinicaltrials.gov/ct2/show/NCT06113159.

Safety and practicality study of using an exoskeleton in acute neurosurgery patients.

INTRODUCTION: Early mobilization is key in neurologically impaired persons, limiting complications and improving long-term recovery. Self-balanced exoskeletons are used in rehabilitation departments to help patients stand and walk. We report the first case series of exoskeleton use in acute neurosurgery and intensive care patients, evaluating safety, clinical feasibility and patients' satisfaction. METHODS: We report a retrospective observational study including individuals hospitalized in the neurosurgical intensive care and neurosurgery departments. We included patients with a medical prescription for an exoskeleton session, and who met no contraindication. Patients benefited from standing sessions using a self-balanced exoskeleton (Atalante, Wandercraft, France). Patients and sessions data were collected. Safety, feasibility and adherence were evaluated. RESULTS: Seventeen patients were scheduled for 70 standing sessions, of which 27 (39%) were completed. They were typically hospitalized for intracranial hemorrhage (74%) and presented with unilateral motor impairments, able to stand but with very insufficient weight shifting to the hemiplegic limb, requiring support (MRC 36.2 ± 3.70, SPB 2.0 ± 1.3, SPD 0.7 ± 0.5). The average duration of standing sessions was 16 ± 9 min. The only side effect was orthostatic hypotension (18.5%), which resolved with returning to seating position. The most frequent reason for not completing a session was understaffing (75%). All patients were satisfied and expressed a desire to repeat it. CONCLUSIONS: Physiotherapy using the exoskeleton is safe and feasible in the acute neurosurgery setting, although it requires adaptation from the staff to organize the sessions. An efficacy study is ongoing to evaluate the benefits for the patients.

Biomechanical analysis of different back-supporting exoskeletons regarding musculoskeletal loading during lifting and holding.

Industrial back support exoskeletons (BSEs) are a promising approach to addressing low back pain (LBP) which still affect a significant proportion of the workforce. They aim to reduce lumbar loading, the main biomechanical risk factor for LBP, by providing external support to the lumbar spine. The aim of this study was to determine the supporting effect of one active (A1) and two passive (P1 and P2) BSEs during different manual material handling tasks. Kinematic data and back muscle activity were collected from 12 subjects during dynamic lifting and static holding of 10 kg. Mean and peak L5/S1 extension moments, L5/S1 compression forces and muscle activation were included in the analysis. During dynamic lifting all BSEs reduced peak (12-26 %) and mean (4-17 %) extension moments and peak (10-22 %) and mean (4-15 %) compression forces in the lumbar spine. The peak (13-28 %) and mean (4-32 %) activity of the back extensor muscles was reduced accordingly. In the static holding task, analogous mean reductions for P1 and P2 of L5/S1 extension moments (12-20 %), compression forces (13-23 %) and muscular activity (16-23 %) were found. A1 showed a greater reduction during static holding for extension moments (46 %), compression forces (41 %) and muscular activity (54 %). This pronounced difference in the performance of the BSEs between tasks was attributed to the actuators used by the different BSEs.

Robotic exoskeletons and total knee arthroplasty: The future of knee rehabilitation and replacement - A meta-analysis.

OBJECTIVE: Exoskeletons can play a crucial role in post-TKA rehabilitation by accelerating recovery, improving mobility, and reducing further injury risk. This meta-analysis evaluated the effectiveness of exoskeletons in post-total knee replacement (TKR) rehabilitation. DESIGN: Comprehensive searches were conducted on PubMed, OVID Medline, Cochrane Collaboration Library, and Embase (period: database inception to March 2023). Randomized controlled trials enrolling patients who underwent TKR and studies examining the effect of robot-assisted rehabilitation on physical function and pain outcomes were eligible for inclusion. Eight studies (302 patients) were thus included. RESULTS: Exoskeletons significantly improved active range of motion (ROM) (SMD: 10.98, 95% confidence interval (CI): 7.81-14.16, P < .001), passive ROM (SMD: 4.11, 95% CI: 1.02-7.20, P = .009), Hospital for Special Surgery scores (SMD: 7.78, 95% CI: 5.87-9.68, P < .00001), and hospital stay length (SMD: -3.19, 95% CI: -4 to -2.38, P < .00001) compared with conventional rehabilitation. Active and passive ROM improvements suggest that exoskeletons aid knee function restoration and mobility post-TKR, whereas Hospital for Special Surgery score improvements support exoskeleton use in TKR rehabilitation. A shorter hospital stay was an important finding which could potentially reduce healthcare costs and improve outcomes. CONCLUSION: Despite the inclusion of a limited number of studies, our findings suggest that exoskeletons can enhance post-TKR rehabilitation outcomes and improve quality of life. Robot-assisted rehabilitation may be effective following TKR. Further research should confirm these findings.

Multimodal brain-controlled system for rehabilitation training: Combining asynchronous online brain-computer interface and exoskeleton.

BACKGROUND: Traditional therapist-based rehabilitation training for patients with movement impairment is laborious and expensive. In order to reduce the cost and improve the treatment effect of rehabilitation, many methods based on human-computer interaction (HCI) technology have been proposed, such as robot-assisted therapy and functional electrical stimulation (FES). However, due to the lack of active participation of brain, these methods have limited effects on the promotion of damaged nerve remodeling. NEW METHOD: Based on the neurofeedback training provided by the combination of brain-computer interface (BCI) and exoskeleton, this paper proposes a multimodal brain-controlled active rehabilitation system to help improve limb function. The joint control mode of steady-state visual evoked potential (SSVEP) and motor imagery (MI) is adopted to achieve self-paced control and thus maximize the degree of brain involvement, and a requirement selection function based on SSVEP design is added to facilitate communication with aphasia patients. COMPARISON WITH EXISTING METHODS: In addition, the Transformer is introduced as the MI decoder in the asynchronous online BCI to improve the global perception of electroencephalogram (EEG) signals and maintain the sensitivity and efficiency of the system. RESULTS: In two multi-task online experiments for left hand, right hand, foot and idle states, subject achieves 91.25% and 92.50% best accuracy, respectively. CONCLUSION: Compared with previous studies, this paper aims to establish a high-performance and low-latency brain-controlled rehabilitation system, and provide an independent and autonomous control mode of the brain, so as to improve the effect of neural remodeling. The performance of the proposed method is evaluated through offline and online experiments.

A Comprehensive Review: Robot-Assisted Treatments for Gait Rehabilitation in Stroke Patients.

Robot-assisted gait training (RAGT) is at the cutting edge of stroke rehabilitation, offering a groundbreaking method to improve motor recovery and enhance the quality of life for stroke survivors. This review investigates the effectiveness and application of various RAGT systems, including both end-effector and exoskeleton robots, in facilitating gait enhancements. The selection process for this comprehensive analysis involved a meticulous review of the literature from databases such as PubMed, the Cochrane Library, and EMBASE, focusing on studies published between 2018 and 2023. Ultimately, 27 studies met the criteria and were included in the final analysis. The focus of these studies was on the various RAGT systems and their role in promoting gait and balance improvements. The results of these studies conclusively show that patients experience significant positive effects from RAGT, and when combined with other physiotherapy methods, the outcomes are notably superior in enhancing functional ambulation and motor skills. This review emphasizes RAGT's capability to deliver a more customized and effective rehabilitation experience, highlighting the importance of tailoring interventions to meet the specific needs of each patient.

Wearing a back-support exoskeleton alters lower-limb joint kinetics during single-step recovery following a forward loss of balance.

We assessed the effects of a passive, back-support exoskeleton (BSE) on lower-limb joint kinetics during the initiation and swing phases of recovery from a forward loss of balance. Sixteen (8M, 8F) young, healthy participants were released from static forward-leaning postures and attempted to recover their balance with a single-step while wearing a BSE (backXTM) with different levels of support torque and in a control condition. The BSE provided âˆ¼ 15-20 Nm of external hip extension torque on the stepping leg at the end of initiation and beginning of swing phases. Participants were unable to generate sufficient hip flexion torque, power, and work to counteract this external torque, although they sustained hip flexion torque for a more prolonged period, resulting in slightly increased hip contribution to positive leg work (compared to control). However, net positive leg work, and the net contribution of hip joint (human + BSE) to total leg work decreased with BSE use. While all participants had changes in hip joint kinetics, a significant compensatory increase in ankle contribution to positive leg work was observed only among females. Our results suggest that BSE use adversely affects reactive stepping by decreasing the stepping leg kinetic energy for forward propulsion, and that the relative contributions of lower-limb joints to total mechanical work done during balance recovery are altered by BSE use. BSEs may thus need to be implemented with caution for dynamic tasks in occupational settings, as they may impair balance recovery following a forward loss of balance.

[Design and support performance evaluation of medical multi-position auxiliary support exoskeleton mechanism].

Aiming at the status of muscle and joint damage caused on surgeons keeping surgical posture for a long time, this paper designs a medical multi-position auxiliary support exoskeleton with multi-joint mechanism by analyzing the surgical postures and conducting conformational studies on different joints respectively. Then by establishing a human-machine static model, this study obtains the joint torque and joint force before and after the human body wears the exoskeleton, and calibrates the strength of the exoskeleton with finite element analysis software. The results show that the maximum stress of the exoskeleton is less than the material strength requirements, the overall deformation is small, and the structural strength of the exoskeleton meets the use requirements. Finally, in this study, subjects were selected to participate in the plantar pressure test and biomechanical simulation with the man-machine static model, and the results were analyzed in terms of plantar pressure, joint torque and joint force, muscle force and overall muscle metabolism to assess the exoskeleton support performance. The results show that the exoskeleton has better support for the whole body and can reduce the musculoskeletal burden. The exoskeleton mechanism in this study better matches the actual working needs of surgeons and provides a new paradigm for the design of medical support exoskeleton mechanism.

Equivalent weight: Application of the assessment method on real task conducted by railway workers wearing a back support exoskeleton.

Commonly used risk indexes, such as the NIOSH Lifting Index, do not capture the effect of exoskeletons. This makes it difficult for Health and Safety professionals to rigorously assess the benefit of such devices. The community requires a simple method to assess the effectiveness of back-support exoskeleton's (BSE) in possibly reducing ergonomic risk. The method introduced in this work is termed "Equivalent Weight" (EqW) and it proposes an interpretation of the effect built on the benefit delivered through reduced activation of the erector spinae (ES). This manifests itself as an apparent reduction of the lifted load perceived by the wearer. This work presents a pilot study where a practical application of the EqW method is used to assess the ergonomic risk in manual material handling (MMH) when using a back support exoskeleton (StreamEXO). The results are assessed by combining observational measurements from on-site testing with five different workers and quantitative measures of the muscle activity reduction achieved during laboratory evaluation with ten workers. These results will show that when lifting, lowering, and carrying a 19 kg load the StreamEXO can reduce risk by up to two levels (from "high" to "low") in the target sub-tasks. The Lifting index (LI) was reduced up to 64% when examining specific sub-tasks and the worker's movement conduction.

Bilateral tibial fractures associated with powered exoskeleton use in complete spinal cord injury - a case report & literature review.

INTRODUCTION: Powered robotic exoskeleton (PRE) physiotherapy programmes are a relatively novel frontier which allow patients with reduced mobility to engage in supported walking. Research is ongoing regarding their utility, risks, and benefits. This article describes the case of two fractures occurring in one patient using a PRE. CASE: We report the case of a 54 year old man who sustained bilateral tibial fractures while using a PRE, on a background of T10 AIS A SCI. The initial session was discontinued due to acute severe bilateral knee swelling after approximately 15 min. The patient attended their local hospital the following day, where radiographs demonstrated bilateral proximal tibial fractures. The patient was treated with manipulation under anaesthetic and long-leg casting for five weeks, at which point he was stepped down to hinged knee braces which were weaned gradually while he remained non-weight bearing for 12 weeks. The patient was investigated with DEXA scan and was diagnosed with osteoporosis. He was liaised with rheumatology services and bone protection was initiated. Fracture healing was achieved and weight-bearing precautions were discontinued, however this period of immobilisation led to significant spasticity. The patient was discharged from orthopaedic services, with ongoing rehabilitation and physiotherapy follow-up. CONCLUSION: PRE assisted physiotherapy programmes are a promising concept in terms of rehabilitation and independence, however they are not without risk and it is important that both providers and patients are aware of this. Furthermore, SCI patients are at increased risk for osteoporosis and should be monitored and considered for bone protection.

Innovative Metaheuristic Optimization Approach with a Bi-Triad for Rehabilitation Exoskeletons.

The present work proposes a comprehensive metaheuristic methodology for the development of a medical robot for the upper limb rehabilitation, which includes the topological optimization of the device, kinematic models (5 DOF), human-robot interface, control and experimental tests. This methodology applies two cutting-edge triads: (1) the three points of view in engineering design (client, designer and community) and (2) the triad formed by three pillars of Industry 4.0 (autonomous machines and systems, additive manufacturing and simulation of virtual environments). By applying the proposed procedure, a robotic mechanism was obtained with a reduction of more than 40% of its initial weight and a human-robot interface with three modes of operation and a biomechanically viable kinematic model for humans. The digital twin instance and its evaluation through therapeutic routines with and without disturbances was assessed; the average RMSEs obtained were 0.08 rad and 0.11 rad, respectively. The proposed methodology is applicable to any medical robot, providing a versatile and effective solution for optimizing the design and development of healthcare devices. It adopts an innovative and scalable approach to enhance their processes.

A State-of-the-Art of Exoskeletons in Line with the WHO's Vision on Healthy Aging: From Rehabilitation of Intrinsic Capacities to Augmentation of Functional Abilities.

The global aging population faces significant health challenges, including an increasing vulnerability to disability due to natural aging processes. Wearable lower limb exoskeletons (LLEs) have emerged as a promising solution to enhance physical function in older individuals. This systematic review synthesizes the use of LLEs in alignment with the WHO's healthy aging vision, examining their impact on intrinsic capacities and functional abilities. We conducted a comprehensive literature search in six databases, yielding 36 relevant articles covering older adults (65+) with various health conditions, including sarcopenia, stroke, Parkinson's Disease, osteoarthritis, and more. The interventions, spanning one to forty sessions, utilized a range of LLE technologies such as Ekso®, HAL®, Stride Management Assist®, Honda Walking Assist®, Lokomat®, Walkbot®, Healbot®, Keeogo Rehab®, EX1®, overground wearable exoskeletons, Eksoband®, powered ankle-foot orthoses, HAL® lumbar type, Human Body Posturizer®, Gait Enhancing and Motivation System®, soft robotic suits, and active pelvis orthoses. The findings revealed substantial positive outcomes across diverse health conditions. LLE training led to improvements in key performance indicators, such as the 10 Meter Walk Test, Five Times Sit-to-Stand test, Timed Up and Go test, and more. Additionally, enhancements were observed in gait quality, joint mobility, muscle strength, and balance. These improvements were accompanied by reductions in sedentary behavior, pain perception, muscle exertion, and metabolic cost while walking. While longer intervention durations can aid in the rehabilitation of intrinsic capacities, even the instantaneous augmentation of functional abilities can be observed in a single session. In summary, this review demonstrates consistent and significant enhancements in critical parameters across a broad spectrum of health conditions following LLE interventions in older adults. These findings underscore the potential of LLE in promoting healthy aging and enhancing the well-being of older adults.

A six degrees-of-freedom cable-driven robotic platform for head-neck movement.

This paper introduces a novel cable-driven robotic platform that enables six degrees-of-freedom (DoF) natural head-neck movements. Poor postural control of the head-neck can be a debilitating symptom of neurological disorders such as amyotrophic lateral sclerosis and cerebral palsy. Current treatments using static neck collars are inadequate, and there is a need to develop new devices to empower movements and facilitate physical rehabilitation of the head-neck. State-of-the-art neck exoskeletons using lower DoF mechanisms with rigid linkages are limited by their hard motion constraints imposed on head-neck movements. By contrast, the cable-driven robot presented in this paper does not constrain motion and enables wide-range, 6-DoF control of the head-neck. We present the mechatronic design, validation, and control implementations of this robot, as well as a human experiment to demonstrate a potential use case of this versatile robot for rehabilitation. Participants were engaged in a target reaching task while the robot applied both assistive and resistive moments on the head during the task. Our results show that neck muscle activation increased by 19% when moving the head against resistance and decreased by 28-43% when assisted by the robot. Overall, these results provide a scientific justification for further research in enabling movement and identifying personalized rehabilitation for motor training. Beyond rehabilitation, other applications such as applying force perturbations on the head to study sensory integration and applying traction to achieve pain relief may benefit from the innovation of this robotic platform which is capable of applying controlled 6-DoF forces/moments on the head.

Brain-machine interface based on deep learning to control asynchronously a lower-limb robotic exoskeleton: a case-of-study.

BACKGROUND: This research focused on the development of a motor imagery (MI) based brain-machine interface (BMI) using deep learning algorithms to control a lower-limb robotic exoskeleton. The study aimed to overcome the limitations of traditional BMI approaches by leveraging the advantages of deep learning, such as automated feature extraction and transfer learning. The experimental protocol to evaluate the BMI was designed as asynchronous, allowing subjects to perform mental tasks at their own will. METHODS: A total of five healthy able-bodied subjects were enrolled in this study to participate in a series of experimental sessions. The brain signals from two of these sessions were used to develop a generic deep learning model through transfer learning. Subsequently, this model was fine-tuned during the remaining sessions and subjected to evaluation. Three distinct deep learning approaches were compared: one that did not undergo fine-tuning, another that fine-tuned all layers of the model, and a third one that fine-tuned only the last three layers. The evaluation phase involved the exclusive closed-loop control of the exoskeleton device by the participants' neural activity using the second deep learning approach for the decoding. RESULTS: The three deep learning approaches were assessed in comparison to an approach based on spatial features that was trained for each subject and experimental session, demonstrating their superior performance. Interestingly, the deep learning approach without fine-tuning achieved comparable performance to the features-based approach, indicating that a generic model trained on data from different individuals and previous sessions can yield similar efficacy. Among the three deep learning approaches compared, fine-tuning all layer weights demonstrated the highest performance. CONCLUSION: This research represents an initial stride toward future calibration-free methods. Despite the efforts to diminish calibration time by leveraging data from other subjects, complete elimination proved unattainable. The study's discoveries hold notable significance for advancing calibration-free approaches, offering the promise of minimizing the need for training trials. Furthermore, the experimental evaluation protocol employed in this study aimed to replicate real-life scenarios, granting participants a higher degree of autonomy in decision-making regarding actions such as walking or stopping gait.

Exploring Human-Exoskeleton Interaction Dynamics: An In-Depth Analysis of Knee Flexion-Extension Performance across Varied Robot Assistance-Resistance Configurations.

Knee rehabilitation therapy after trauma or neuromotor diseases is fundamental to restore the joint functions as best as possible, exoskeleton robots being an important resource in this context, since they optimize therapy by applying tailored forces to assist or resist movements, contributing to improved patient outcomes and treatment efficiency. One of the points that must be taken into account when using robots in rehabilitation is their interaction with the patient, which must be safe for both and guarantee the effectiveness of the treatment. Therefore, the objective of this study was to assess the interaction between humans and an exoskeleton during the execution of knee flexion-extension movements under various configurations of robot assistance and resistance. The evaluation encompassed considerations of myoelectric activity, muscle recruitment, robot torque, and performed movement. To achieve this, an experimental protocol was implemented, involving an individual wearing the exoskeleton and executing knee flexion-extension motions while seated, with the robot configured in five distinct modes: passive (P), assistance on flexion (FA), assistance on extension (EA), assistance on flexion and extension (CA), and resistance on flexion and extension (CR). Results revealed distinctive patterns of movement and muscle recruitment for each mode, highlighting the complex interplay between human and robot; for example, the largest RMS tracking errors were for the EA mode (13.72 degrees) while the smallest for the CR mode (4.47 degrees), a non-obvious result; in addition, myoelectric activity was demonstrated to be greater for the completely assisted mode than without the robot (the maximum activation levels for the vastus medialis and vastus lateralis muscles were more than double those when the user had assistance from the robot). Tracking errors, muscle activations, and torque values varied across modes, emphasizing the need for careful consideration in configuring exoskeleton assistance and resistance to ensure effective and safe rehabilitation. Understanding these human-robot interactions is essential for developing precise rehabilitation programs, optimizing treatment effectiveness, and enhancing patient safety.

A systematic review of the effects of robotic exoskeleton training on energy expenditure and body composition in adults with spinal cord injury.

Metabolic diseases disproportionately affect people with spinal cord injury (SCI). Increasing energy expenditure and remodeling body composition may offset deleterious consequences of SCI to improve cardiometabolic health. Evidence is emerging that robotic exoskeleton use increases physical activity in SCI, but little is known about its effects on energy expenditure and body composition. This study therefore aimed to evaluate the impact of robotic exoskeleton training on body composition and energy expenditure in adults with SCI. A systematic literature review was performed according to the Preferred Reporting Items for Systematic Review and Meta-Analysis guidelines. Five databases were searched to retrieve studies meeting pre-set eligibility criteria: adults with SCI, interventions evaluating the effects of robotic exoskeleton devices on body composition or energy expenditure. The PEDro scale guided quality assessments with findings described narratively. Of 2163 records, 10 studies were included. Robotic exoskeleton training does not significantly improve energy expenditure compared to other exercise interventions. Significant changes ( P  < 0.05) in body composition, particularly reduced fat mass, however, were reported. High variability seen with the interventions was coupled with poor quality of the studies. While robotic exoskeleton interventions may propose modest cardiometabolic benefits in adults with SCI, further robust trials in larger samples are needed to strengthen these findings.