Dynamic changes of facial skeletal fractures with time.

To investigate the characteristics of imaging changes with time of facial fractures, patients with facial fractures who had computed tomographic scan were enrolled including 500 patients who were divided into six groups based on the time of scanning: super early (<3 d), early (4-7 d), early-to-medium (8-14 d), medium (15-21d), medium-to-late (22d-2 months) and late stage (>2 months). The data were compared and analyzed. Forty two patients with frontal bone fractures had high-energy impact as the reason of fractures. The fracture line was clear and sharp within one week but blunt and sclerotic due to bone absorption at 2-3 weeks, and might exist for a long time. All patients had soft tissue swelling and paranasal sinus effusion at 1-2 weeks after injury. Air might gather in the adjacent soft tissues and/or intracranially within 3 days of injury if the fracture involved the frontal or other sinuses. Twelve of the 42 patients (28.6%) had intracranial hematoma, and five (11.9%) had epidural effusion. Subarachnoid hemorrhage was mostly absorbed within one week while epidural hematoma was completely absorbed over 3 weeks. Significant changes (P < 0.05) in the fracture lines, effusion of paranasal sinuses, soft tissue swelling and pneumocephalus were observed during the study period. For patients with medial orbital wall fractures, the fracture line was sharp and clear at early stages with concurrent sphenoid sinus effusion, and the fracture line became depressed 3 weeks later with disappearance of sphenoid sinus effusion. Significant changes (P < 0.05) were observed in the sharp fracture line, soft tissue swelling, sphenoid sinus effusion and smooth depression at fracture sites. For nasal fractures, the fracture line was sharp and clear at early stages with concurrent soft tissue swelling which disappeared one week later. The fracture line became smooth three weeks later. A significant (P < 0.05) difference was demonstrated in the changes of fracture line and soft tissue swelling with time. In conclusion, facial fractures have some dynamic alterations with time and identification of these characteristics may help reaching a correct clinical diagnosis with regard to fracture severity and time.

Maxillofacial trauma: managing potentially dangerous and disfiguring complex injuries [digest].

Patients with maxillofacial trauma require a careful evaluation due to the anatomical proximity of the maxillofacial region to the head and neck. Facial injuries can range from soft-tissue lacerations and nondisplaced nasal fractures to severe, complex fractures, eye injuries, and possible brain injury. Though the Advanced Trauma Life Support (ATLS) guidelines provide a framework for the management of trauma patients, they do not provide a detailed reference for many subtle or complex facial injuries. This issue adds a more comprehensive and systematic approach to the secondary survey of the maxillofacial area and emergency department management of injuries to the face. In addition to an overall review of maxillofacial trauma pathophysiology, associated injuries, and physical examination, this review will also discuss relevant imaging, treatment, and disposition plans. [Points & Pearls is a digest of Emergency Medicine Practice].

Stress and displacement patterns in the craniofacial skeleton with rapid maxillary expansion-a finite element method study.

BACKGROUND: Rapid maxillary expansion (RME), indicated in the treatment of maxillary deficiency directs high forces to maxillary basal bone and to other adjacent skeletal bones. The aim of this study is to (i) evaluate stress distribution along craniofacial sutures and (ii) study the displacement of various craniofacial structures with rapid maxillary expansion therapy by using a Finite Element model. METHODS: An analytical model was developed from a dried human skull of a 12 year old male. CT scan images of the skull were taken in axial direction parallel to the F-H plane at 1 mm interval, processed using Mimics software, required portion of the skull was exported into stereo-lithography model. ANSYS software was used to solve the mathematical equation. Contour plots of the displacement and stresses were obtained from the results of the analysis performed. RESULTS: At Node 47005, maximum X-displacement was 5.073 mm corresponding to the incisal edge of the upper central incisor. At Node 3971, maximum negative Y-displacement was -0.86 mm which corresponds to the anterior zygomatic arch, indicating posterior movement of craniofacial complex. At Node 32324, maximum negative Z-displacement was -0.92 mm representing the anterior and deepest convex portion of the nasal septum; indicating downward displacement of structures medial to the area of force application. CONCLUSIONS: Pyramidal displacement of maxilla was evident. Apex of pyramid faced the nasal bone and base was located on the oral side. Posterosuperior part of nasal cavity moved minimally in lateral direction and width of nasal cavity at the floor of the nose increased, there was downward and forward movement of maxilla with a tendency toward posterior rotation. Maximum von Mises stresses were found along midpalatal, pterygomaxillary, nasomaxillary and frontomaxillary sutures.

Chitayat syndrome: hyperphalangism, characteristic facies, hallux valgus and bronchomalacia results from a recurrent c.266A>G p.(Tyr89Cys) variant in the ERF gene.

BACKGROUND: In 1993, Chitayat et al., reported a newborn with hyperphalangism, facial anomalies, and bronchomalacia. We identified three additional families with similar findings. Features include bilateral accessory phalanx resulting in shortened index fingers; hallux valgus; distinctive face; respiratory compromise. OBJECTIVES: To identify the genetic aetiology of Chitayat syndrome and identify a unifying cause for this specific form of hyperphalangism. METHODS: Through ongoing collaboration, we had collected patients with strikingly-similar phenotype. Trio-based exome sequencing was first performed in Patient 2 through Deciphering Developmental Disorders study. Proband-only exome sequencing had previously been independently performed in Patient 4. Following identification of a candidate gene variant in Patient 2, the same variant was subsequently confirmed from exome data in Patient 4. Sanger sequencing was used to validate this variant in Patients 1, 3; confirm paternal inheritance in Patient 5. RESULTS: A recurrent, novel variant NM_006494.2:c.266A>G p.(Tyr89Cys) in ERF was identified in five affected individuals: de novo (patient 1, 2 and 3) and inherited from an affected father (patient 4 and 5). p.Tyr89Cys is an aromatic polar neutral to polar neutral amino acid substitution, at a highly conserved position and lies within the functionally important ETS-domain of the protein. The recurrent ERF c.266A>C p.(Tyr89Cys) variant causes Chitayat syndrome. DISCUSSION: ERF variants have previously been associated with complex craniosynostosis. In contrast, none of the patients with the c.266A>G p.(Tyr89Cys) variant have craniosynostosis. CONCLUSIONS: We report the molecular aetiology of Chitayat syndrome and discuss potential mechanisms for this distinctive phenotype associated with the p.Tyr89Cys substitution in ERF.

Self-reported oral behaviour habits in hyperdivergent and normodivergent facial types.

The relationship between facial morphology and jaw function remains controversial. The purpose of this study was to investigate differences in self-reported oral behaviour habits between individuals with normodivergent and hyperdivergent facial types. Some 80 cases and controls were individually matched on age, sex ethnicity and treatment stage. The participants were recruited from an orthodontic clinic, and included both adolescents and adults. Habitual oral activity was assessed using the Oral Behaviour Checklist (OBC) based on their experiences in the past 4 weeks. Univariate and bivariate analyses were performed. The sample had a mean age of 17·2 years (SD = 4·6; range = 12-49 years), and was predominantly female (65·0%) and of New Zealand European origin (91·3%). The prevalence of reporting one or more frequently performed habitual muscular behaviour in either study group was over 85% (P > 0·05). There was no difference in total OBC score between the hyperdivergent (25·6; SD: 9·0) and normodivergent group (25·3; SD: 9·9). Moreover, there was no difference in the prevalence of either nocturnal or daytime oral behaviours between the two groups. While this study did not include any objective measures of functional or habitual activity, we found no differences in self-reported oral behaviour habits between normodivergent and hyperdivergent individuals. The findings do not support an association between vertical facial form and habitual muscular activity.

Dynamic Response of the Skull with Sinuses under Blunt Frontal Impact: A Three-Dimensional Computational Study.

The objective of this study is to analyze the biomechanical effects of sinuses in the skull on the facial impact response. Two models were built, where one had sinuses and the other had none. The models were verified using cadaver test data, including impacts to frontal bone, zygomatic bone, and maxillae. In the maxilla and zygoma impact, sinuses were found to have no significant effect on the global distribution of stress or stiffness of facial bones, and the influence was limited in local area. In forehead impact, the sinuses significantly affected the distribution of stress and strain in the skull due to its location in facial bones. The result shows that if the sinus is far away from the location of impact, its effect on the overall response of skull could be ignored. In addition, the distance between the region of interest and sinuses is another important parameter when studying the local effect of sinuses.

SURGICAL TREATMENT OF UPPER AND MIDDLE FACIAL ZONE TRAUMAS IN PROGRESS OF CONCOMITANT TRAUMATIC CRANIOFACIAL INJURIES.

In 2012-2015, 207 patients with concomitant craniofacial injuries, who underwent surgical treatment, were observed; among them 176 were men and 31- women. Age of the patients ranged from 16 to 60 years. According to localization and severity of trauma and a priority of surgical intervention, the patients conventionally were divided into 3 groups by the authors: I group (65 patients) - craniofacial injuries; the skull as well as upper and middle areas of face (subcranial and frontobasal fractures) were affected (fractured). II group (80 patients) - severe traumatic injuries of upper and especially middle zones of the face, accompanied with closed craniocerebral trauma, no need in neurosurgery. III group (62 patients) -on the background of serious head traumas, the injuries of face bones were less severe (injury of one or two anatomic areas with displacement of fractured fragments but without bone tissue defects) According to the obtained results a priority was always given to the neurosurgery (vital testimony).The reconstructive surgeries on face skeleton was conducted in combination involving neurosurgeons (I group patients). Reconstructive surgeries of facial bones were conducted in the patients of II group, immediately or at primary deferred period of time but in the patients of III group the surgical procedures for removal of early secondary or traumatic residual fractures have been performed. Reposition of the fractured facial bone fragments was performed in an open way and fixation was carried out by titanium plates and mesh cage (at bone tissue defect). For prevention and elimination of post-traumatic inflammatory processes, the final stage of surgical intervention was: sanation of nasal accessory sinuses and catheterization (5-7 days) of external carotid arteries for administration of antibiotics and other medical preparations. Early and differentiated approach to face injuries, worsening in the course of craniocephalic trauma was not revealed in any patient; there was no evidence of development inflammatory processes in traumatic regions; esthetic and functional results obtained after the surgeries of maxillofacial area were assessed as good and satisfactory.

Three-dimensional finite element analysis of maxillary protraction with labiolingual arches and implants.

INTRODUCTION: In this study, we aimed to evaluate the effects of maxillary protraction using traditional labiolingual arches and implant-type protraction devices before orthopedic treatment of patients with skeletal Class III malocclusion. METHODS: A 3-dimensional finite element model of the maxillofacial bones with high biologic similarity and including the sutures was constructed. Through stress and displacement calculations, a biomechanical study was performed for the maxillofacial bones, mandible, and sutures. RESULTS: We quantified detailed changes in the sutures with 2 protraction methods to analyze their effects on the growth of the maxillofacial bones. CONCLUSIONS: (1) The labiolingual arch is suitable for skeletal Class III patients with crossbite and deep overbite. The frontomaxillary and zygomaticomaxillary sutures played major roles in the forward displacement and counterclockwise rotation of the maxilla. The temporozygomatic and pterygopalatine sutures did not change significantly. (2) The implant type of protraction device is suitable for skeletal Class III patients with crossbite and open bite. Both the frontomaxillary and zygomaticomaxillary sutures played decisive roles in the forward displacement and clockwise rotation of maxilla. The temporozygomatic and pterygopalatine sutures showed small changes. (3) The labiolingual arch caused less stimulatory growth on the maxilla, whereas the implant caused greater stimulatory growth on the maxilla. Protraction with the labiolingual arch is more suitable for early skeletal Class III patients at a younger age; protraction with an implant is applicable to skeletal Class III patients in the late mixed dentition or early permanent dentition.

[The mechanical properties of the bone tissue from the middle facial region].

The objective of the present work was to study age-related features of the reaction of the maxillary sinus cavity walls to a variety of impacts associated with the surgical interventions. To this effect, a variety of stress-strain conditions were simulated that are known to arise in the maxillary sinus cavity walls under the action of different force vectors taking into consideration the age-specific peculiarities of the mechanical structure of the bone tissue. The 3D model of the maxillary sinus cavity was built up based on the results of spiral computed tomography with the use of the Solid Works 2012 software package (USA). The finite element method (FEM) was employed to construct the grid. Three variants of force application were simulated, one to the canine fossa region, another to the upper portion of the alveolar process at the border between the upper and lower walls of the sinus, and the third to the anterior part of the inferior nasal passage. The study has demonstrated that the bone wall of the maxillary sinus differently responds to the impacts of similar magnitude depending on the application point and age-related physical and mechanical properties of the bone tissue. This finding should be taken into account in the choice of the optimal surgical approach to the maxillary sinus. It was calculated that endonasal interventions should be preferred for the treatment of patients above 60 years of age as the minimally injurious ones to the bone tissue. Moreover, special caution is needed when the intervention is performed beneath the canine fossa, where the bone is extremely fragile and the risk of injury extension to the floor of the maxillary sinus is especially high.

Craniofacial modifications in Ivorian melanoderm children with chronic retronasal obstruction.

OBJECTIVE: To determine the influence of the chronic retro nasal airway obstruction on craniofacial morphology. METHODS: It was a case-control study which included fifty-eight melanoderm children aged from 3 to 6 years (31 males and 27 females), divided in 2 samples. A studied group of 29 habitual snorers presenting chronic retro nasal obstruction due to enlarged adenoid and a control group of 29 age matched children selected among patients consulting for routine evaluation. Patients who had used topical or systemic medication for the nose, as well as those who had undergone adenoidectomy were excluded from the study. Children were submitted to history taking then ENT and orthodontic examination. Linear and angular cephalometric measurements were used for craniofacial features evaluation. RESULTS: Significant craniofacial anomalies were found in patients presenting chronic retro nasal obstruction: shortened cranial base and mandibular plane length, widened cranio-cervical flexure, forwardness of hyoid bone, reduced nasopharyngeal airway space, widened of oropharyngeal and hypopharyngeal airway space. CONCLUSIONS: Our study suggests that craniofacial modifications due to chronic retro nasal obstruction lead to pharyngeal airway readjustment. Persistent retro nasal obstruction should be corrected early in life in order to avoid skeletal modifications appearance.

Premature closure of the spheno-occipital synchondrosis in Pfeiffer syndrome: a link to midface hypoplasia.

The spheno-occipital synchondrosis (SOS) is a critical component of midfacial and cranial base growth. Premature closure has been associated with midface hypoplasia in animal models and syndromic craniosynostosis subpopulations with Apert and Muenke syndromes. To link premature SOS closure and midface hypoplasia in patients with Pfeiffer syndrome, a retrospective case-control study was performed in patients treated at a large craniofacial center between 1982 and 2012 diagnosed with Pfeiffer syndrome. At least 1 computed tomography (CT) scan was required to assess SOS patency. Age-/sex-matched control CT scans were also assessed for SOS patency. Three independent reviewers with high interrater reliability (κ = 0.88) graded SOS patency as open, partially closed, or completely closed. Wilcoxon rank sum test compared the Pfeiffer patients with control subjects. A total of 63 CT scans in 16 patients with Pfeiffer syndrome, all with midface hypoplasia, and 63 age-/sex-matched control scans, none of whom had midface hypoplasia, met inclusion criteria. Earliest partial SOS closure in patients with Pfeiffer syndrome was seen at 5 days compared with control subjects at 7.07 years. Earliest age at complete fusion was 2.76 years in the Pfeiffer cohort and 12.74 years in control subjects. Average age at partial closure was significantly younger (4.99 ± 3.33 years; n = 31 scans) in patients with Pfeiffer syndrome compared with control subjects (10.92 ± 3.53 years) (P = 0.0005), whereas average age at complete closure (11.90 ± 7.04 years) was not significantly different than that in control subjects (16.07 ± 3.39 years). Although definitive causality cannot be concluded, a strong correlation exists between midface hypoplasia and premature SOS closure in Pfeiffer syndrome.

Correlação entre as densidades ósseas maxilo-mandibular, cabeças mandibulares, e vértebras cervicais C1,C2,C3 através de tomografia computadorizada com CT multislice (escala Hounsfield): osteoporose localizada ou sistêmica / Correlation between the bone densities jaws, heads mandibular and cervical vertebrae C1,C2,C3 through computed tomography with multislice CT(Hounsfiled scale). Osteoporosis localize or systemic

A osteoporose é uma doença óssea metabólica que afeta também os ossos dos maxilares. Causa um aumento da porosidade que reflete na integração da qualidade e densidade óssea mineral, prejudicando o tratamento reabilitador com implantes. O meio diagnóstico padrão ouro é densitometria óssea por emissão dupla de raios X(DXA), mas a tomografia computadorizada também se mostra muito eficaz na avaliação da qualidade óssea através da escala Hounsfield. Nesse estudo, avaliamos as densidades ósseas das cabeças mandibulares, regiões dos dentes 13,23 na maxila, 36,46 na mandíbula e vértebras cervicais C1, C2, C3, através da escala Hounsfield em exames tomográficos, e correlacionamos seus valores para diagnóstico de Osteoporose localizada ou sistêmica. Avaliamos 79 TC multi-slice de pacientes que realizaram exames simultaneamente da maxila e da mandíbula,sendo que 35 homens e 44 mulheres com mais de 40 anos de idade. Usamos o software e-film para analise das regiões estudadas. Os resultados mostram que 59.96% apresentam densidade abaixo de 200 HU em mais de 03 sítios estudados, classificando-os como osteoporose sistêmica, e 43.03% apresentam osteoporose localizada. No sexo feminino 61.76% apresentam osteoporose localizada e 60% osteoporose sistêmica. Já o sexo masculino 38.23% apresenta osteoporose localizada e 40% apresenta osteoporose sistêmica. Pudemos conclui que a tomografia computadorizada multislice obtida para finalidade de diagnóstico em odontologia mostrou-se capaz de identificar indivíduos com risco de osteoporose sistêmica, considerando a metodologia aplicada a esta amostragem.

Osteoporosis is a metabolic bone disease that also affects the bones of the jaws. Causes an increase in porosity that reflects the integration of quality and bone mineral density, hindering rehabilitation treatment with implants. The gold standard diagnostic tool is bone densitometry by dual energy x-ray absorptiometry (DXA), computed tomography but also proves very effective in assessing bone quality through Hounsfield scale. In this study, we evaluated the bone density of mandibular heads, regions of the teeth in the maxilla 13,23, 36.46 mandible and cervical vertebrae C1, C2, C3, through Hounsfield scale CT scans, and correlated their values for diagnosis of Osteoporosis localized or systemic. We evaluated 79 multi-slice CT of patients who underwent both examinations of the maxilla and mandible, with 35 men and 44 women over 40 years of age. We use software to analyze and Efilm-investigated regions. The results show that 56.06% have density below 200 HU from over 03 sites studied, classifying them as systemic osteoporosis, and 43.03% have localized osteoporosis. In females 61.76% have localized osteoporosis and 60% systemic osteoporosis. Have the male presents 38.23% localized osteoporosis and 40% presents systemic osteoporosis. We concluded that multislice computed tomography obtained for diagnostic purposes in dentistry proved to be able to identify individuals at risk for systemic osteoporosis, considering the methodology applied to this sample.

Video analysis of the biomechanics of a bicycle accident resulting in significant facial fractures.

INTRODUCTION: This study aimed to use video analysis techniques to determine the velocity, impact force, angle of impact, and impulse to fracture involved in a video-recorded bicycle accident resulting in facial fractures. Computed tomographic images of the resulting facial injury are presented for correlation with data and calculations. To our knowledge, such an analysis of an actual recorded trauma has not been reported in the literature. MATERIALS AND METHODS: A video recording of the accident was split into frames and analyzed using an image editing program. Measurements of velocity and angle of impact were obtained from this analysis, and the force of impact and impulse were calculated using the inverse dynamic method with connected rigid body segments. These results were then correlated with the actual fracture pattern found on computed tomographic imaging of the subject's face. RESULTS: There was an impact velocity of 6.25 m/s, impact angles of 14 and 6.3 degrees of neck extension and axial rotation, respectively, an impact force of 1910.4 N, and an impulse to fracture of 47.8 Ns. These physical parameters resulted in clinically significant bilateral mid-facial Le Fort II and III pattern fractures. DISCUSSION: These data confer further understanding of the biomechanics of bicycle-related accidents by correlating an actual clinical outcome with the kinematic and dynamic parameters involved in the accident itself and yielding a concrete evidence of the velocity, force, and impulse necessary to cause clinically significant facial trauma. These findings can aid in the design of protective equipment for bicycle riders to help avoid this type of injury.

Biomechanical mechanisms of orbital wall fractures - a transient finite element analysis.

As the biomechanical mechanisms of orbital wall fractures are still under research, three different fracture mechanisms were tested in a finite element based investigation. In contrast to earlier studies, a finer skeletal model and a transient dynamic simulation were used to test pure hydraulic, pure buckling and a mixed force transmission. Results showed that each set-up led to different orbital fracture patterns, which correlate well with clinical findings. Therefore the conclusion is that different mechanisms may act together explaining the variety of clinical fracture situations. Biomechanical testing has proven to be appropriate in answering questions regarding fracture mechanisms.

Gorham-Stout syndrome of the facial bones: a review of pathogenesis and treatment modalities and report of a case with a rare cutaneous manifestations.

Gorham disease is a very rare condition associated with spontaneous destruction and resorption of 1 or more bones anywhere in the body. Many authors have suggested and/or implicated trauma as the initiating factor in the majority of the reported cases. It can affect almost all bones, and a combination of bones has been reported. In the maxillofacial skeleton, the first facial case was reported by Romer in 1928. Until now, only a few cases of Gorham disease affecting the maxillofacial bones, including this case report, have been reported. We present a brief review of the pathogenesis and treatment modalities of the disease and report a very rare clinical picture of the disease affecting a young and otherwise healthy patient with massive osteolysis of the mandibular bone and extensive involvement of the mouth floor and skin of the chin, which to our knowledge, is the only case report with skin manifestation affecting the maxillofacial region. Such skin manifestations play an important role for the diagnosis and add a clue for management of such condition.

A case of recovery of oral function with dental implants following facial bone trauma.

A 44-year-old woman had sustained facial lacerations, loss of several teeth, alveolar bone fracture, and severe vertical bone resorption in conjunction with a shattered alveolar bone and marked loss of intraoral function and facial disfigurement in a car accident. She underwent 9 surgical procedures by plastic surgeons to treat the facial lesions, including hold facial scar formation reduction surgery, reduction of fractures of the nasal and cheek bones, and bone transplants. To restore intraoral function and improve facial appearance, plastic surgeons transplanted a rib into the maxillary sinus while dental surgeons simultaneously inserted 5 dental implants. Eleven months after the dental implant surgery, a complete upper denture and a mandibular gingival ceramometal-casting crown were fitted. After insertion of the final prosthodontics, regular follow-up examinations were performed to check dental occlusion, oral hygiene, and the condition of the gingival tissue. In the years since the upper dental implants were fitted, there have been no bone resorption and no functional problems. Transplantation of rib bones is an effective method for maxillary reconstruction and remains effective even after the insertion of dental implants. The patient is extremely satisfied with the results. A means of maintaining oral health over the long term, and of motivating the patient to maintain oral health, should be established.

Relationship between occlusal findings and orofacial myofunctional status in primary and mixed dentition: part IV: interrelation between space conditions and orofacial dysfunctions.

AIM: The aim of this study was to provide basic representative data on the prevalence of malocclusions involving space deficiency in both primary and early mixed dentition and to examine the relationship between these malocclusions and orofacial dysfunctions. The results should be viewed from an orthodontic prevention and early treatment perspective. SUBJECTS AND METHODS: Orthodontic findings in the maxilla and mandible as well as the myofunctional status of 766 children in primary dentition and 2,209 children in mixed dentition were examined clinically in a cross-sectional study. The following parameters from each jaw were subjected to orthodontic analysis: crowding in the anterior and posterior regions of the maxilla and mandible in primary and mixed dentitions, deviations from normal maxillary arch forms in the primary dentition, deviations from normal anterior maxillary arch width in mixed dentition and maxillary apical base morphology in mixed dentition. Static and dynamic orofacial dysfunctions were documented with reference to specific parameters and clinical tests. RESULTS: Crowding was observed in every tenth child in primary dentition (10.8%) and in every second child in mixed dentition (49.7%). Habitual open mouth posture, visceral swallowing, articulation disorders and oral habits were statistically significantly more frequent in children in primary dentition presenting a narrow maxillary arch. Reduced anterior maxillary arch width (compression) was statistically more frequent in children in early mixed dentitions with habitual open mouth posture. A narrow maxillary apical base correlated positively with all the orofacial dysfunctions analyzed. CONCLUSIONS: Deviations from a regular arch form become apparent very early during dentition development and coexist with specific orofacial dysfunctions. They are thus important indicators for the early detection of functional abnormalities, causing deviations from normal dentition development. In children with orofacial dysfunctions the development of a narrow maxillary dental arch should be prevented by myofunctional therapy and by educating the parents. Interceptive orthodontic measures to treat a narrow maxillary arch in primary and early mixed dentition should also focus on eliminating functional disturbing factors, such as orofacial dysfunctions. Interdisciplinary cooperation with specialists in other fields of medicine, e.g. otorhinolaryngology and speech therapy, is essential to achieve this goal.

Biomechanical response of the maxillofacial skeleton to transpalatal orthopedic force in a unilateral palatal cleft.

OBJECTIVES: To assess the skeletal and dental effects of rapid maxillary expansion in a patient with unilateral cleft deformity of secondary palate and alveolus using the finite element method. MATERIALS AND METHODS: A patient-specific composite skull model was developed from a patient computed tomographic scan and a surface scan of the patient's maxillary cast using MIMICS imaging analysis software. For volumetric meshing and the finite element analysis, Abaqus (6.7) was used. RESULTS: The typical wedge-shaped opening that occurs after RME, seen in non-cleft patients, is not seen in cleft patients. A clockwise rotation of the maxilla as a result of maxillary expansion was evident. The areas of maximum stress were the intact primary palate region, inferior orbital foramen of the non-cleft and the cleft sides, and the zygomatic buttress of the cleft side. During expansion, the intact primary palate showed high stress and acted as a region of major resistance, followed by the zygomatic buttress on the cleft side. CONCLUSIONS: Clinicians should consider a need for customization of expansion therapy for cleft patients depending on the patient's age, the type of cleft present (primary or secondary palate), and the desired area of expansion (anterior or posterior).

Upper lip bite test in a patient with McCune Albright syndrome with acromegaly.

We report a patient with McCune Albright syndrome with acromegaly and features predictive of difficult airway except a class I upper lip bite (ULB) test. Our patient, a 33-year-old woman, had a history of polyostotic fibrous dysplasia. Tracheal intubation was performed under general anaesthesia. Although we did not find any difficulty in visualizing the glottis by direct laryngoscopy; our patient had multiple poor predictive signs of airway assessment including a Mallampati grade III, restricted neck movement and macroglossia. Our report suggests that the ULB test in people with acromegaly may act as an indicator of easy intubation in spite of other poor predictive signs. However, this finding needs further corroboration by a large study to evaluate the role of the ULB test in people with acromegaly.

Periorbital skeletal augmentation to improve blepharoplasty and midfacial results.

BACKGROUND: Narrow palpebral fissures, short lower lids, and full cheeks are hallmarks of youthful periorbita. The presence of these features is predicated on a convex upper midface skeleton. Faces whose midface skeletons are flat or concave do not manifest these youthful attributes, tend to age prematurely, and are prone to lower lid malposition after blepharoplasty. METHODS: Augmentation of the infraorbital rim with alloplastic implants can provide convexity to the deficient upper midface skeleton. Suspension of the cheek soft tissues (subperiosteal midface lift) on this now supportive framework narrows the palpebral fissure, shortens the lower lid, and gives fullness to the cheek. The addition of lateral canthopexy to skeletal augmentation and subperiosteal midface lift can restore lower lid position when previous blepharoplasty has resulted in lower lid malposition in patients with deficient midface skeletons. RESULTS: This concept has been utilized in 87 patients (65 female, 22 male) over the last 7 years. Of these 87 patients, four patients (5 percent) required revision surgery to correct implant malposition or prominence. Three patients (3 percent) required implant removal to treat infection. Implants were later replaced in two of these three patients. CONCLUSIONS: Augmentation of the infraorbital rim with alloplastic implants provides convexity to the upper midface skeleton. Together with lower lid and midface soft-tissue suspension, it creates or restores youthful periorbital aesthetics.