Application of solid-state 13C relaxation time to prediction of the recrystallization inhibition strength of polymers on amorphous felodipine at low polymer loading.

The potential for inhibiting recrystallization with Eudragit® L (EUD-L), hypromellose acetate succinate (HPMC-AS), and polyvinylpyrrolidone-co-vinylacetate (PVP-VA) on amorphous felodipine (FLD) at low polymer loading was investigated in this study. The physical stabilities of the FLD/polymer amorphous solid dispersions (ASDs) were investigated through storage at 40 °C. The HPMC-AS and PVP-VA strongly inhibited FLD recrystallization, although EUD-L did not effectively inhibit the FLD recrystallization. The rotating frame 1H spin-lattice relaxation time (1H-T1ρ) measurement clarified that EUD-L was not well mixed with FLD in the ASD, which resulted in weak inhibition of recrystallization by EUD-L. In contrast, the HPMC-AS and PVP-VA were well mixed with the FLD in the ASDs. Solid-state 13C spin-lattice relaxation time (13C-T1) measurements at 40 °C showed that the molecular mobility of the FLD was strongly suppressed when mixed with polymer. The reduction in the molecular mobility of FLD was in the following order, starting with the least impact: FLD/EUD-L ASD, FLD/HPMC-AS ASD, and FLD/PVP-VA ASD. FLD mobility at the storage temperature, evaluated by 13C-T1, showed a good correlation with the physical stability of the amorphous FLD. The direct investigation of the molecular mobility of amorphous drugs at the storage temperature by solid-state NMR relaxation time measurement can be a useful tool in selecting the most effective crystallization inhibitor at low polymer loading.

Bottom-Up and Top-Down Approaches to Explore Sodium Dodecyl Sulfate and Soluplus on the Crystallization Inhibition and Dissolution of Felodipine Extrudates.

The objectives of this study were to explore sodium dodecyl sulfate (SDS) and Soluplus on the crystallization inhibition and dissolution of felodipine (FLDP) extrudates by bottom-up and top-down approaches. FLDP extrudates with Soluplus and SDS were prepared by hot melt extrusion, and characterized by polarized light microscopy, differential scanning calorimetry, and fourier transform infrared spectroscopy. Results indicated that Soluplus inhibited FLDP crystallization, and the whole amorphous solid dispersions (ASDs) were binary FLDP-Soluplus (1:3) and ternary FLDP-Soluplus-SDS (1:2:0.15∼0.3 and 1:3:0.2∼0.4) extrudates. Internal SDS (5%-10%) decreased glass transition temperatures of FLDP-Soluplus-SDS ternary ASDs without presenting molecular interactions with FLDP or Soluplus. The enhanced dissolution rate of binary or ternary Soluplus-rich ASDs in the nonsink condition of 0.05% SDS was achieved. Bottom-up approach indicated that Soluplus was a much stronger crystal inhibitor to the supersaturated FLDP in solutions than SDS. Top-down approach demonstrated that SDS enhanced the dissolution of Soluplus-rich ASDs via wettability and complexation with Soluplus to accelerate the medium uptake and erosion kinetics of extrudates, but induced FLDP recrystallization and resulted in incomplete dissolution of FLDP-rich extrudates. In conclusion, top-down approach is a promising strategy to explore the mechanisms of ASDs' dissolution, and small amount of SDS enhances the dissolution rate of polymer-rich ASDs in the nonsink condition.

Solid-state characterization of Felodipine-Soluplus amorphous solid dispersions.

The aim of the current study is to develop amorphous solid dispersion (SD) via hot melt extrusion technology to improve the solubility of a water-insoluble compound, felodipine (FEL). The solubility was dramatically increased by preparation of amorphous SDs via hot-melt extrusion with an amphiphilic polymer, Soluplus® (SOL). FEL was found to be miscible with SOL by calculating the solubility parameters. The solubility of FEL within SOL was determined to be in the range of 6.2-9.9% (w/w). Various techniques were applied to characterize the solid-state properties of the amorphous SDs. These included Fourier Transform Infrared Spectrometry spectroscopy and Raman spectroscopy to detect the formation of hydrogen bonding between the drug and the polymer. Scanning electron microscopy was performed to study the morphology of the SDs. Among all the hot-melt extrudates, FEL was found to be molecularly dispersed within the polymer matrix for the extrudates containing 10% drug, while few small crystals were detected in the 30 and 50% extrudates. In conclusion, solubility of FEL was enhanced while a homogeneous SD was achieved for 10% drug loading.

Development and validation of TLC-densitometric method for simultaneous determination of two binary antihypertensive mixtures containing felodipine in fixed dose combinations.

A new densitometric thin-layer chromatographic method has been developed for simultaneous determination of two binary mixtures containing felodipine in combination with either metoprolol (mixture I) or ramipril (mixture II). The two mixtures were quantitatively separated on 60 F254 silica gel plates using toluene-ethyl acetate-methanol-ammonia as mobile phase with UV detection at 233 and 229 nm for mixtures I and II, respectively. The studied drugs were satisfactorily resolved with retention factor (Rf ) values of 0.34 ± 0.03 and 0.65 ± 0.03 for metoprolol and felodipine, respectively, in mixture I and 0.35 ± 0.03 and 0.74 ± 0.03 for ramipril and felodipine, respectively, in mixture II. Linearity ranges were 2000-7000 and 200-700 ng/band for metoprolol and felodipine, respectively, in mixture I and 1500-4000 ng/band for both ramipril and felodipine in mixture II. Correlation coefficient (r) values were 0.9968 for both metoprolol and felodipine in mixture I and 0.9993 for ramipril and 0.9989 for felodipine in mixture II. The method has been validated according to International Conference on Harmonization guidelines and has been successfully applied for determination of the studied drugs in their dosage forms without interference from commonly encountered excipients.

Investigation of phase diagrams and physical stability of drug-polymer solid dispersions.

Solid dispersion technology has been widely explored to improve the solubility and bioavailability of poorly water-soluble compounds. One of the critical drawbacks associated with this technology is the lack of physical stability, i.e. the solid dispersion would undergo recrystallization or phase separation thus limiting a product's shelf life. In the current study, the melting point depression method was utilized to construct a complete phase diagram for felodipine (FEL)-Soluplus® (SOL) and ketoconazole (KTZ)-Soluplus® (SOL) binary systems, respectively, based on the Flory-Huggins theory. The miscibility or solubility of the two compounds in SOL was also determined. The Flory-Huggins interaction parameter χ values of both systems were calculated as positive at room temperature (25 °C), indicating either compound was miscible with SOL. In addition, the glass transition temperatures of both solid dispersion systems were theoretically predicted using three empirical equations and compared with the practical values. Furthermore, the FEL-SOL solid dispersions were subjected to accelerated stability studies for up to 3 months.

Quantification of swelling and erosion in the controlled release of a poorly water-soluble drug using synchrotron X-ray computed microtomography.

The hydration layer plays a key role in the controlled drug release of gel-forming matrix tablets. For poorly water-soluble drugs, matrix erosion is considered as the rate limiting step for drug release. However, few investigations have reported on the quantification of the relative importance of swelling and erosion in the release of poorly soluble drugs, and three-dimensional (3D) structures of the hydration layer are poorly understood. Here, we employed synchrotron radiation X-ray computed microtomography with 9-µm resolution to investigate the hydration dynamics and to quantify the relative importance of swelling and erosion on felodipine release by a statistical model. The 3D structures of the hydration layer were revealed by the reconstructed 3D rendering of tablets. Twenty-three structural parameters related to the volume, the surface area (SA), and the specific surface area (SSA) for the hydration layer and the tablet core were calculated. Three dominating parameters, including SA and SSA of the hydration layer (SA hydration layer and SSA hydration layer ) and SA of the glassy core (SA glassy core ), were identified to establish the statistical model. The significance order of independent variables was SA hydration layer > SSA hydration layer > SA glassy core , which quantitatively indicated that the release of felodipine was dominated by a combination of erosion and swelling. The 3D reconstruction and structural parameter calculation methods in our study, which are not available from conventional methods, are efficient tools to quantify the relative importance of swelling and erosion in the controlled release of poorly soluble drugs from a structural point of view.

The stability of solid dispersions of felodipine in polyvinylpyrrolidone characterized by nanothermal analysis.

Nanothermal analysis (NTA) supported by atomic force microscopy imaging has been used to study the changes that occur at the surfaces of solid dispersions of the drug felodipine and the water soluble polymer, polyvinylpyrrolidone (PVP) on exposure to standard pharmaceutical environmental stress conditions. Exposure to relative humidities above 75% (at 40 °C) was sufficient to achieve phase separation of the drug and polymer into areas which displayed a glass transition temperature consistent with pure drug and polymer over a period of a few days. Higher values of humidity at 25 °C (e.g. 95%RH) were also sufficient to cause such phase separation within a day. Extended studies of up to two months showed an eventual crystallization of the drug. NTA is shown to be effective at the early detection of instabilities in solid dispersions and the quantifiable identification of the relative composition of phase separated domains based upon their glass transition temperatures. The combined nanoscale analytical approach employed here is able to systematically study the influence of storage conditions and different drug loadings and to evaluate physical stability as a function of environmental conditions.

Compositional analysis of low quantities of phase separation in hot-melt-extruded solid dispersions: a combined atomic force microscopy, photothermal fourier-transform infrared microspectroscopy, and localised thermal analysis approach.

PURPOSE: To characterise phase separations in aged hot-melt-extruded solid dispersions at a micron to submicron scale. METHODS: Hot-melt-extruded felodipine and Eudragit® E PO systems at a range of compositions were studied after a standard period of aging to allow phase separation to occur. The samples were characterised using combined nano-thermal analysis, photothermal FTIR microspectroscopy coupled with pulsed force mode AFM as a novel characterisation approach. RESULT: Crystalline felodipine presents in all formulations with drug loadings from 10-70% (w/w). In formulations with high drug loadings (50 and 70%), amorphous felodipine co-exists with crystalline forms, and higher drug concentration is observed in the centre compared to the outer surface of the extrudates. Drug crystal dimensions in extrudates with low drug loadings (10-30%) are small, in the micron to submicron range. We propose that uneven drug distribution is principally caused by processing-associated factors such as expansion of extrudates during extrusion. CONCLUSIONS: We have demonstrated that the novel combined approach allows site-specific characterisation of the extruded systems and that drug distribution may be uneven across the extrudates, with concomitant implications for understanding stability and drug release behaviour.

In vitro release of felodipine from original brand and generic products.

Eight different felodipine (CAS 72509-76-3) products (nominal content: 5 mg) were tested for their in vitro release profile: The generic drugs A-G and the reference product Modip. During an incubation period of 7 h in dissolution vessels (paddle method in accordance with USP XXII) samples were taken to be assayed for the active ingredient concentration within 24 h by means of UV spectroscopy. All products examined released at least the content declared. While the 6 tablets of the reference differed only slightly in their release kinetics, the other products showed considerable variability with the exception of Drug D (uniform rapid release) and Drug C. The reference offered the linear controlled-release profile expected from an extended-release product. Three different time profiles could be distinguished in the generics: a) Drugs A, B, F, and D practically showed immediate release of the active ingredient, b) Drugs E and G showed some extent of controlled release (however, more than 50% of the total content was released within 60 min); c) Drug C displayed controlled-release properties but a more rapid release than the reference at all sampling times.

Sensitive spectrophotometric determination of amlodipine and felodipine using iron(III) and ferricyanide.

A simple, accurate, sensitive and economical procedure for the estimation of amlodipine besylate and felodipine, both in pure form and in formulations has been developed. The method is based on the reduction of iron(III) by the studied drugs in acid medium and subsequent interaction of iron(II) with ferricyanide to form Prussian blue. The product exhibits absorption maximum at 760 nm in both cases. Beer's law is obeyed in the concentration ranges 5.0-15.0 and 1.5-5.0 microg/ml, for amlodipine and felodipine, respectively. The molar absorptivities are 1.76 x 10(4) and 4.24 x 10(4) l/mol cm. The corresponding Sandell sensitivities are 23.18 and 9.06 ng/cm(2). The limits of detection as well as quantification are reported. Seven replicate analyses of solutions containing three different concentrations of each drug were carried out and the percent error and the RSD values have been reported. The proposed method was applied to the determination of these drugs in pharmaceutical formulations and the results demonstrate that the method is equally accurate and precise as the official methods as found from the t- and F-values. The reliability of the method was established by recovery studies using standard-addition technique.

Evaluation of controlled-release polar lipid microparticles.

The aim of the present study was to prepare controlled-release tablets of poorly-soluble drug, felodipine, and various erodable lipophilic excipients. Spray chilling was used to formulate the drug and the excipients into solid dispersion microparticles, which were then compressed. The microparticles were characterised by Fourier transform infrared spectroscopy, hot-stage microscopy, scanning electron microscopy, and image analysis. The amine and the carbonyl groups of felodipine formed hydrogen bonds with the carriers. The shape of the particles was spherical with the median particle diameter ranging from 25 to 35 microm. Surprisingly, the degree of crystallinity in felodipine and the ease of tablet disintegration played a more significant role on the felodipine dissolution rate than the matrix lipophilicity. Felodipine release rate was slowest from the least lipophilic tablets.

Unmasking the dynamic interplay between intestinal P-glycoprotein and CYP3A4.

Drug efflux by intestinal P-glycoprotein (P-gp) is known to decrease the oral bioavailability of many CYP3A4 substrates. We hypothesized that the interplay occurring between P-gp and CYP3A4 at the apical membrane would increase the opportunity for drug metabolism. To define the roles of P-glycoprotein (P-gp) and CYP3A4 in controlling the extent of intestinal absorption and metabolism, two substrates were tested. The transport, metabolism, and intracellular levels of N-methyl piperazine-Phe-homoPhe-vinylsulfone phenyl (K77, a cysteine protease inhibitor; P-gp and CYP3A4 substrate) and felodipine (CYP3A4 substrate only) were measured across CYP3A4-transfected Caco-2 cells in the presence of an inhibitor of CYP3A4 and P-gp, cyclosporine (CsA), or an inhibitor of P-gp and not CYP3A4, GG918 (N-[4-[2-(1,2,3,4-tetrahydro-6,7- dimethoxy-2-isoquinolinyl)-ethyl]-phenyl]-9,10-dihydro-5-methoxy-9-oxo-4-acridine carboxamine). The extent of metabolism was measured by calculating the extraction ratio (ER) across the cells, while accounting for intracellular changes occurring with P-gp inhibition. The (A)pical to (B)asolateral and B-->A ERs for K77 were 0.33 and 0.06, respectively. These changed with GG918 to 0.14 and 0.12 and with CsA to 0.06 and 0.04. Felodipine ERs were similar in both directions, 0.26 and 0.24 (A-->B and B-->A), and were unchanged in the presence of GG918 but decreased with CsA (0.14 and 0.11). The K77 absorption rate was increased 5 and 4.2-fold in the presence of CsA and GG918, respectively, whereas no change was observed for felodipine absorption. The decreased A-->B ER and increased absorption of K77 with GG918 suggest that P-gp influences the extent of drug metabolism in the intestine via prolonging the access of drugs to CYP3A4 near the apical membrane and decreasing transport across the cells.

A stability indicating LC method for felodipine.

A stability indicating reversed-phase liquid chromatographic (RP-LC) method was developed for the assay of felodipine as a bulk drug and in pharmaceuticals. The chromatography was performed on a C18 column. Eluents were monitored by UV detection at 238 nm using the mobile phase methanol-potassium dihydrogen orthophosphate (pH 3.5; 0.01 M) (75:25, v/v). The method was statistically validated for linearity, accuracy, precision and specificity. The linearity of felodipine peak area responses was demonstrated within the concentration range of 1-7 microg/ml. The limits of detection and quantitation were 150 and 500 ng/ml, respectively. The method was demonstrated to be precise, accurate and specific with no interference from the tablet excipients and separation of the drug peak from the peaks of the degradation products (oxidative degradation, photodegradation, acid and base degradation). The results indicated that the proposed method could be used in a stability assay.

Use of supercritical fluid extraction for sample preparation of sustained-release felodipine tablets.

Supercritical fluid extraction (SFE) was shown to be an accurate and precise alternative to liquid extraction for sample preparation of sustained-release felodipine tablets (5 mg potency) while realizing an 80% reduction in solvent consumption. Extractions of felodipine spiked on an inert support were used to evaluate the solubility of felodipine in CO2 as well as analyte trapping after SFE. Even though the pure drug was found to be soluble in pure CO2, extractions of felodipine from the tablet matrix required moderate modifier concentrations [8.7% (v/v) methanol in CO2] in order to overcome strong matrix-drug interactions. Sequential static/dynamic extraction steps were also required to quantitatively recover the drug from the tablet matrix, indicating that the drug extraction was diffusion-limited. Average recoveries (n = 5) for the optimized SFE method were determined to be 4.93 mg felodipine tablet (98.6% claim) with an RSD of 1.2% versus those for the liquid extraction procedure (n = 5, 4.98 mg/tablet, 99.6% claim, 2.4% RSD). Similar levels of drug degradation (0.12% expressed as felodipine) were also obtained with both the traditional liquid extraction and with the SFE method.

Analysis of felodipine by packed column supercritical fluid chromatography with electron capture and ultraviolet absorbance detection.

A reproducible and selective supercritical fluid chromatography (SFC) method was developed for the analysis of felodipine, a drug indicated for the treatment of hypertension. Methanol-modified carbon dioxide was employed as the SFC mobile phase with both electron capture detection (ECD) and multi-wavelength detection (MWD) being used simultaneously for analyte determination. Chromatography limit of detection (LOD) and limit of quantitation (LOQ), linear dynamic range (LDR) and injection precision were obtained in order to assess chromatographic and detector performance for both the SFC/MWD and SFC/ECD/MWD systems. The method was shown to be stability indicating since felodipine could be separated from its potential oxidative degradation product, H152/37, in under 6 min (felodipine k' = 2.44). Sample throughput was increased by 60% with the SFC assay vs LC. The optimized SFC method was shown to be equivalent to an existing LC/UV procedure for the analysis of a sustained-release tablet while realizing a 92% saving in disposable solvent waste. In order to achieve further solvent savings overall, supercritical fluid extraction (SFE) with 8% methanol-modified carbon dioxide as the extraction fluid was used to extract felodipine from a sustained-release tablet (as opposed to traditional solvent extraction). Comparable drug recoveries were obtained with SFE sample preparation technique when either SFC or LC extract analysis was utilized.

Histological and in vitro studies supporting decreased uteroplacental blood flow as explanation for digital defects after administration of vasodilators.

In a recent study, the vasodilating drugs nifedipine, nitrendipine, felodipine, and hydralazine induced phalangeal defects in rabbits, when given on day 16 of pregnancy. Histologically, the changes were characterized by disturbed chondrogenesis. In order to elucidate mechanisms behind the defects, the fetal concentration of felodipine was measured, and the fetal limb plates were examined histologically, at 0, 2, 4, 8, 12, and 24 hours after single oral administration of felodipine (12 mumol/kg) on day 16 in pregnant rabbits. The effects of nifedipine, nitrendipine, and felodipine were also investigated in an in vitro system, in which chick embryonic mesenchymal limb bud cells differentiated into chondrocytes. In this system, no inhibition of chondrogenesis was observed below concentrations 3 x 10(5) M. At this concentration, unspecific cytotoxicity was found. The highest fetal concentrations of felodipine were more than 500 times lower than what was required for in vitro toxicity. Histologically, the digital areas of the limb plates showed extensive edema and dilatation of marginal sinus within 2 hours. After 8 hours, rupture of the thin-walled vessels occurred with hemorrhages. Finally, small necroses and blisters were observed. Similar early changes have been reported in experiments where digital defects were induced by clamping uterine vessels. This study thus indicates that the phalangeal defects after administration of high doses of vasodilators are secondary to pharmacological action (associated with a significant reduction in the uteroplacental blood flow), and not a direct effect on fetal chondrogenesis.

Flow injection extraction applied to dissolution rate studies of felodipine tablets.

A flow injection analysis (FIA) extraction method has been developed for the analysis of felodipine tablets in connection with dissolution rate testing. The water-soluble oxidation product of felodipine, a pyridine derivative, was extracted into chloroform and measured at 275 nm spectrophotometrically. The FIA-extraction method has been compared with the present liquid chromatographic (LC) method. The sampling rate for the FIA-extraction (60 samples h-1) is 5 times higher than for the LC method. The FIA-extraction method has a standard deviation of 1% for both standards and samples which is the same as for the LC method.