One-pot, microwave (MW)-assisted production of furfural from almond-, oil-, and wine-derived co-products through biorefinery-based approaches.

This work outlines the first microwave (MW)-assisted protocol for the production of biofuel precursor furfural (FF) from the raw agricultural waste almond hull (AH), olive stone (OS), and the winemaking-derived grape stalk (GS), grape marc (GM) and exhausted grape marc (EGM) through a one-pot synthesis process. To enhance the overall yield, a catalytic process was firstly developed from xylose, major constituent of hemicellulose present in lignocellulosic biomass. This method afforded FF with 100 % selectivity, yielding over 85 % in isolated product when using H2SO4, as opposed to a 37 % yield with AlCl3·6H2O, at 150 °C in only 10 min. For both catalysts, the developed methodology was further validated, proving adaptable and efficient in producing the targeted FF from the aforementioned lignocellulosic raw materials. More specifically, the employment of AlCl3·6H2O resulted in the highest selectivity (up to 89 % from GM) and FF yield (42 % and 39 % molar from OS and AH, respectively), maintaining notable selectivity for the latter (61 and 48 % from AH and OS). At this regard, and considering the environmental factor of sustainability, it is important to point out the role of AlCl3·6H2O in contrast to H2SO4, thus mitigating detrimental substances. This study provides an important management of agricultural waste through sustainable practises for the development of potential bio-based chemicals, aligning with Green Chemistry and process intensification principles.

Investigation of the formation of furfural compounds in apple products treated with pasteurization and high pressure processing.

The thermal treatment carried out in the processing of apple products is very likely to induce Maillard reaction to produce furfurals, which have raised toxicological concerns. This study aimed to elucidate the formation of furfural compounds in apple products treated with pasteurization and high pressure processing (HPP). The method for simultaneous determination of five furfural compounds including 5-hydroxymethyl-2-furfural (5-HMF), furfural (F), 4-hydroxy-2,5-dimethyl-3(2H)-furanone (HDMF), 2-acetylfuran (FMC), and 5-Methyl-2-furfural (MF) using high performance liquid chromatography equipped with diode array detector (HPLC-DAD) was successfully developed and validated. All five furfurals exhibited an increasing trend after the pasteurization treatment of apple clear juice, cloudy juice, and puree. 5-HMF, F, FMC, and MF were increased significantly during the precooking of apple puree. Whereas there was no significant change in the furfurals formation after apple products treated with high pressure processing (HPP) with 300 MPa and 15 min. Based on the variation of the fructose, glucose and sucrose detected in apple products after thermal treatment, it revealed that the saccharides and thermal treatment have great effect on the furfural compounds formation. The commercial fruit juice samples with different treatments and fruit puree samples treated with pasteurization were also analyzed. Five furfurals were detected more frequently in the fruit juice samples treated with pasteurization or ultra-high temperature instantaneous sterilization (UHT) than those treated with HPP. 5-HMF and FMC were detected in all fruit puree samples treated with pasteurization, followed by F, MF, and HDMF with the detection rate of 79.31 %, 72.41 %, and 51.72 %. The results could provide a reference for risk assessment of furfural compounds and dietary guidance of fruit products for human, especially for infants and young children. Moreover, moderate HPP treatment with 300 MPa and 15 min would be a worthwhile alternative processing technology in the fruit juice and puree production to reduce the formation of furfural compounds.

Fabrication of fully bio-based malleable thermoset derived from cellulose, furfural and plant oil for advanced capacitive sensor.

Fabrication of sustainable bio-based malleable thermosets (BMTs) with excellent mechanical properties and reprocessing ability for applications in electronic devices has attracted more and more attention but remains significant challenges. Herein, the BMTs with excellent mechanical robustness and reprocessing ability were fabricated via integrating with radical polymerization and Schiff-base chemistry, and employed as the flexible substrate to prepare the capacitive sensor. To prepare the BMTs, an elastic bio-copolymer derived from plant oil and 5-hydroxymethylfurfural was first synthesized, and then used to fabricate the dynamic crosslinked BMTs through Schiff-base chemistry with the amino-modified cellulose and polyether amine. The synergistic effect of rigid cellulose backbone and the construction of dynamic covalent crosslinking network not only achieved high tensile strength (8.61 MPa) and toughness (3.77 MJ/m3) but also endowed the BMTs with excellent reprocessing ability with high mechanical toughness recovery efficiency of 104.8 %. More importantly, the BMTs were used as substrates to fabricate the capacitive sensor through the CO2-laser irradiation technique. The resultant capacitive sensor displayed excellent and sensitive humidity sensing performance, which allowed it to be successfully applied in human health monitoring. This work paved a promising way for the preparation of mechanical robustness malleable bio-thermosets for electronic devices.

Efficient production of polyhydroxybutyrate using lignocellulosic biomass derived from oil palm trunks by the inhibitor-tolerant strain Burkholderia ambifaria E5-3.

Lignocellulosic biomass is a valuable, renewable substrate for the synthesis of polyhydroxybutyrate (PHB), an ecofriendly biopolymer. In this study, bacterial strain E5-3 was isolated from soil in Japan; it was identified as Burkholderia ambifaria strain E5-3 by 16 S rRNA gene sequencing. The strain showed optimal growth at 37 °C with an initial pH of 9. It demonstrated diverse metabolic ability, processing a broad range of carbon substrates, including xylose, glucose, sucrose, glycerol, cellobiose, and, notably, palm oil. Palm oil induced the highest cellular growth, with a PHB content of 65% wt. The strain exhibited inherent tolerance to potential fermentation inhibitors derived from lignocellulosic hydrolysate, withstanding 3 g/L 5-hydroxymethylfurfural and 1.25 g/L acetic acid. Employing a fed-batch fermentation strategy with a combination of glucose, xylose, and cellobiose resulted in PHB production 2.7-times that in traditional batch fermentation. The use of oil palm trunk hydrolysate, without inhibitor pretreatment, in a fed-batch fermentation setup led to significant cell growth with a PHB content of 45% wt, equivalent to 10 g/L. The physicochemical attributes of xylose-derived PHB produced by strain E5-3 included a molecular weight of 722 kDa, a number-average molecular weight of 191 kDa, and a polydispersity index of 3.78. The amorphous structure of this PHB displayed a glass transition temperature of 4.59 °C, while its crystalline counterpart had a melting point of 171.03 °C. This research highlights the potential of lignocellulosic feedstocks, especially oil palm trunk hydrolysate, for PHB production through fed-batch fermentation by B. ambifaria strain E5-3, which has high inhibitor tolerance.

Coffee leaf extract inhibits advanced glycation end products and their precursors: A mechanistic study.

Excessive accumulation of advanced glycation end products (AGEs) in the body is associated with diabetes and its complications. In this study, we aimed to explore the potential and mechanism of coffee leaf extract (CLE) in inhibiting the generation of AGEs and their precursors in an in vitro glycation model using bovine serum albumin and glucose (BSA-Glu) for the first time. High-performance liquid chromatography analysis revealed that CLE prepared with ultrasound pretreatment (CLE-U) contained higher levels of trigonelline, mangiferin, 3,5-dicaffeoylquinic acid, and γ-aminobutyric acid than CLE without ultrasound pretreatment (CLE-NU). The concentrations of these components, along with caffeine and rutin, were dramatically decreased when CLE-U or CLE-NU was incubated with BSA-Glu reaction mixture. Both CLE-U and CLE-NU exhibited a dose-dependent inhibition of fluorescent AGEs, carboxymethyllysine, fructosamine, 5-hydroxymethylfurfural, 3-deoxyglucosone, glyoxal, as well as protein oxidation products. Notably, CLE-U exhibited a higher inhibitory capacity compared to CLE-NU. CLE-U effectively quenched fluorescence intensity and increased the α-helix structure of the BSA-Glu complex. Molecular docking results suggested that the key bioactive compounds present in CLE-U interacted with the arginine residues of BSA, thereby preventing its glycation. Overall, this research sheds light on the possible application of CLE as a functional ingredient in combating diabetes by inhibiting the generation of AGEs.

5-Hydroxymethylfurfural mediated developmental toxicity in Drosophila melanogaster.

5-hydroxymethylfurfural is a common byproduct in food. However, its effect on growth and development remains incompletely understood. This study investigated the developmental toxicity of 5-HMF to Drosophila larvae. The growth and development of Drosophila melanogaster fed with 5-50 mM 5-HMF was monitored, and its possible mechanism was explored. It was found that 5-HMF prolonged the developmental cycle of Drosophila melanogaster (25 mM and 50 mM). After 5-HMF intake, the level of reactive oxygen species in the third instar larvae increased by 1.23-1.40 fold, which increased the level of malondialdehyde and caused changes in antioxidant enzymes. Moreover, the nuclear factor erythroid-2 related factor 2 antioxidant signaling pathway and the expression of heat shock protein genes were affected. At the same time, 5-HMF disrupted the glucose and lipid metabolism in the third instar larvae, influencing the expression level of key genes in the insulin signal pathway. Furthermore, 5-HMF led to intestinal oxidative stress, and up-regulated the expression of the pro-apoptotic gene, consequently impacting intestinal health. In short, 5-HMF causes oxidative stress, disturbs glucose and lipid metabolism and induces intestinal damage, damaging related signaling pathways, and ultimately affecting the development of Drosophila melanogaster.

Reduction of maillard browning in spray dried low-lactose milk powders due to protein polysaccharide interactions.

Lactose hydrolysed concentrated milk was prepared using ß-galactosidase enzyme (4.76U/mL) with a reaction period of 12 h at 4 °C. Addition of polysaccharides (5 % maltodextrin/ß-cyclodextrin) to concentrated milk either before or after lactose hydrolysis did not result in significant differences (p > 0.05) in degree of hydrolysis (% DH) of lactose and residual lactose content (%). Three different inlet temperatures (165 °C, 175 °C and 185 °C) were used for the preparation of powders which were later characterised based on physico-chemical and maillard browning characteristics. Moisture content, solubility and available lysine content of the powders decreased significantly, whereas, browning parameters i.e., browning index, 5-hydroxymethylfurfural, furosine content increased significantly (p < 0.05) with an increase in inlet air temperature. The powder was finally prepared with 5 % polysaccharide and an inlet air temperature of 185 °C which reduced maillard browning. Protein-polysaccharide interactions were identified using Fourier Transform infrared spectroscopy, fluorescence spectroscopy and determination of free amino groups in the powder samples. Maltodextrin and ß-cyclodextrin containing powder samples exhibited lower free amino groups and higher degree of graft value as compared to control sample which indicated protein-polysaccharide interactions. Results obtained from Fourier Transform infrared spectroscopy also confirmed strong protein-polysaccharide interactions, moreover a significant decrease in fluorescence intensity was also observed in the powder samples. These interactions between the proteins and polysaccharides reduced the maillard browning in powders.

Tandem hydrogenation/hydrogenolysis of furfural to 2-methylfuran over multifunctional metallic Cu nanoparticles supported ZIF-8 catalyst.

Catalytic transfer hydrogenation (CTH), that employs protic solvents as hydrogen sources to alleviate the use of molecular hydrogen H2, has gained great attention. This work, reports multifunctional, metallic Cu nanoparticles supported ZIF-8 material for CTH of furfural to a highly valued fuel additive, 2-methylfuran (2-MF) using 2-propanol. Of all as-synthesized xCu(yM)/ZIF-8 catalysts with varied NaBH4 concentration (yM) and Cu loading (x), 11Cu(1.5 M)/ZIF-8 exhibited higher catalytic activity with > 99 % FAL conversion and 93.9 % 2-MF selectivity. This is ascribed to its high specific surface area, and existence of optimum amount of Lewis acid-base sites along with Cu0 species, which are responsible for hydrogenation of furfural to furfuryl alcohol and subsequent hydrogenolysis to produce 2-MF. The present work reports a highly efficient and stable, metal-MOF hybrid material for CTH of FAL to 2-MF, which is one among the best reports available in literature, therewith suggests a promising approach for bio-oil upgradation.

Protocol for electrocatalytic hydrogenation of 5-hydroxymethylfurfural using H and flow cells.

Recently, there has been a growing interest in using sustainable energy to decrease lignin monomers to generate high-value-added products. Here, we present a protocol for electrocatalytic hydrogenation of 5-hydroxymethylfurfural. We describe steps for catalyst preparation, performing electrocatalytic experiments, high-performance liquid chromatography analysis, and in situ infrared reflection-absorption spectroscopy testing. The synthesized catalyst used in this reaction exhibits enhanced selectivity and Faradaic efficiency in NaClO4 solution. For complete details on the use and execution of this protocol, please refer to Zhang et al.1.

The Effect of Fermentation on the Chemical Constituents of Gastrodia Tuber Hallimasch Powder (GTHP) Estimated by UHPLC-Q-Orbitrap HRMS and HPLC.

OBJECTIVE: To compare the effect of fermentation on the chemical constituents of Gastrodia Tuder Halimasch Powder (GTHP), to establish its fingerprinting and multicomponent content determination, and to provide a basis for the processing, handling, and clinical application of this herb. METHODS: Ultra-high-performance liquid chromatography-quadrupole-Orbitrap high-resolution mass spectrometry (UHPLC-Q-Orbitrap HRMS) was used to conduct a preliminary analysis of the chemical constituents in GTHP before and after fermentation. High-performance liquid chromatography (HPLC) was used to determine some major differential components of GTHP and establish fingerprints. Cluster analysis (CA), and principal component analysis (PCA) were employed for comprehensive evaluation. RESULTS: Seventy-nine compounds were identified, including flavonoids, organic acids, nucleosides, terpenoids, and others. The CA and PCA results showed that ten samples were divided into three groups. Through standard control and HPLC analysis, 10 compounds were identified from 22 peaks, namely uracil, guanosine, adenosine, 5-hydroxymethylfurfural (5-HMF), daidzin, genistin, glycitein, daidzein, genistein, and ergosterol. After fermentation, GTHP exhibited significantly higher contents of uracil, guanosine, adenosine, 5-hydroxymethylfurfural, and ergosterol and significantly lower genistein and daidzein contents. CONCLUSIONS: The UHPLC-Q-Orbitrap HRMS and HPLC methods can effectively identify a variety of chemical components before and after the fermentation of GTHP. This study provides a valuable reference for further research on the rational clinical application and quality control improvement of GTHP.

A new derivatizing reagent for the determination of 5-nitro-2-furaldehyde in trout muscle by liquid chromatography-tandem mass spectrometry.

The 5-nitro-2-furaldehyde (5-NF) is an aldehyde aromatic organic compound that has been envisaged as an alternative marker for detecting nitrofurazone treatment abuse and to avoid the false positive results induced by the semicarbazide. Analyzing 5-NF presents challenges, and its derivatization reaction with hydrazine reagents is required to enhance the capability of its detection and its identification. This study aims at developping an analytical method for 5-NF determination in trout muscle samples based on chemical derivatization prior to analysis by liquid chromatography-tandem mass spectrometry. Four commercially available hydrazine reagents, namely: N,N-Dimethylhydrazine (DMH), 4-Hydrazinobenzoic acid (HBA), 2,4-Dichlorophenylhydrazine (2,4-DCPH) and 2,6-Dichlorophenylhydrazine (2,6-DCPH) were proposed for the first time as derivatizing reagents in the analysis of 5-NF. The derivatization reaction was simultaneously performed along with the extraction method in acidic condition using ultrasonic assistance and followed by liquid extraction using acetonitrile. The efficiency of the chemical reaction with 5-NF was examined and the reaction conditions including the concentration of hydrochloric acid, pH, temperature, reaction time and the concentration of the derivatizing reagents were optimized. Experiments with fortified samples demonstrated that 2,4-DCPH derivatizing reagent at 20 mM for 20 min of ultrasonic treatment under acidic condition (pH 4) gave an effective sample derivatization method for 5-NF analysis. Under the optimized conditions, the calibration curves were linear from 0.25 to 2 µg kg-1 with coefficient of determination >0.99. The recoveries ranged from 89 % to 116 % and precision was less than 13 %. The limit of detection and quantification were 0.1 and 0.2 µg kg-1, respectively.

Human Keratinocyte Responses to Woodsmoke Chemicals.

Air pollution consists of complex mixtures of chemicals with serious deleterious health effects from acute and chronic exposure. To help understand the mechanisms by which adverse effects occur, the present work examines the responses of cultured human epidermal keratinocytes to specific chemicals commonly found in woodsmoke. Our earlier findings with liquid smoke flavoring (aqueous extract of charred wood) revealed that such extracts stimulated the expression of genes associated with oxidative stress and proinflammatory response, activated the aryl hydrocarbon receptor, thereby inducing cytochrome P4501A1 activity, and induced cross-linked envelope formation, a lethal event ordinarily occurring during terminal differentiation. The present results showed that furfural produced transcriptional responses resembling those of liquid smoke, cyclohexanedione activated the aryl hydrocarbon receptor, and several chemicals induced envelope formation. Of these, syringol permeabilized the cells to the egress of lactate dehydrogenase at a concentration close to that yielding envelope formation, while furfural induced envelope formation without permeabilization detectable in this way. Furfural (but not syringol) stimulated the incorporation of amines into cell proteins in extracts in the absence of transglutaminase activity. Nevertheless, both chemicals substantially increased the amount of cellular protein incorporated into envelopes and greatly altered the envelope protein profile. Moreover, the proportion of keratin in the envelopes was dramatically increased. These findings are consistent with the chemically induced protein cross-linking in the cells. Elucidating mechanisms by which this phenomenon occurs may help understand how smoke chemicals interact with proteins to elicit cellular responses, interpret bioassays of complex pollutant mixtures, and suggest additional sensitive ways to monitor exposures.

Resultant compound from sublimation test for Gentianae Radix in Japanese Pharmacopoeia was 5-(hydroxymethyl)furfural.

Gentianae Radix, an herbal medicine, has been used as a gastrointestinal drug in Japan. In the Japanese Pharmacopoeia 18th Revision, the sublimation test is specified as an identification test for Gentianae Radix. The compound obtained in this sublimation test was believed to be gentisin, a xanthone family compound. However, the compound we identified using liquid chromatography-high-resolution mass spectrometry (LC-HRMS) and 1H- and 13C-NMR was 5-(hydroxymethyl)furfural (5-HMF). The same compound was found to be a sublimate of Gentianae Scabrae Radix and Gentianae Macrophyllae Radix, belonging to the same genus as Gentianae Radix. These results indicate the necessity to revise the identification test for Gentianae Radix to a more unique method.

Identification of redox activators for continuous reactivation of glyoxal oxidase from Trametes versicolor in a two-enzyme reaction cascade.

Glyoxal oxidases, belonging to the group of copper radical oxidases (CROs), oxidize aldehydes to carboxylic acids, while reducing O2 to H2O2. Their activity on furan derivatives like 5-hydroxymethylfurfural (HMF) makes these enzymes promising biocatalysts for the environmentally friendly synthesis of the bioplastics precursor 2,5-furandicarboxylic acid (FDCA). However, glyoxal oxidases suffer from inactivation, which requires the identification of suitable redox activators for efficient substrate conversion. Furthermore, only a few glyoxal oxidases have been expressed and characterized so far. Here, we report on a new glyoxal oxidase from Trametes versicolor (TvGLOX) that was expressed at high levels in Pichia pastoris (reclassified as Komagataella phaffii). TvGLOX was found to catalyze the oxidation of aldehyde groups in glyoxylic acid, methyl glyoxal, HMF, 2,5-diformylfuran (DFF) and 5-formyl-2-furancarboxylic acid (FFCA), but barely accepted alcohol groups as in 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), preventing formation of FDCA from HMF. Various redox activators were tested for TvGLOX reactivation during catalyzed reactions. Among them, a combination of horseradish peroxidase and its substrate 2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid) (ABTS) most efficiently reactivated TvGLOX. Through continuous reactivation of TvGLOX in a two-enzyme system employing a recombinant Moesziomyces antarcticus aryl-alcohol oxidase (MaAAO) almost complete conversion of 8 mM HMF to FDCA was achieved within 24 h.

Sulfonic acid-functionalized k-carrageenan/Cr-based metal-organic framework: An efficient and recyclable catalyst for fructose conversion to 5-hydroxymethylfurfural.

A novel bio-based catalyst was developed by in-situ forming Chromium(III) (Cr)-based metal-organic framework, MIL-101(Cr), in the presence of k-carrageenan (k-Car) and followed by a post-synthetic modification to introduce additional -SO3H functional groups into the composite structure of k-Car/MIL-101(Cr). Different analyses were conducted to confirm the successful catalyst formation. The catalyst performance was evaluated in the solid acid catalyzed dehydration of fructose to 5-hydroxymethylfurfural. The Response Surface Method (RSM) optimization determined that employing 33 wt% of the catalyst at 105 °C for 40 min resulted in a remarkable 97.8 % yield. The catalyst demonstrated suitable recyclability, maintaining its catalytic efficiency over four cycles. Comparative studies with k-Car and the non-sulfonated composite highlighted the superior activity of the catalyst, emphasizing the synergy between the k-Car, MIL-101(Cr) and the influence of -SO3H post-functionalizing on the catalytic performance.

One-pot Twostep Chemobiocatalytic Synthesis of a Furan Amino Acid from 5-Hydroxymethylfurfural.

Recently, catalytic valorization of biomass-derived furans has received growing interest. 5-Aminomethyl-2-furancarboxylic acid (AMFC), a furan amino acid, holds great promise in the aeras of polymer and pharmaceutical, but its synthesis remains limited. In this work, we report a chemobiocatalytic route toward AMFC by combining laccase-TEMPO system and recombinant Escherichia coli (named E. coli_TAF) harboring ω-transaminase (TA), L-alanine dehydrogenase (L-AlaDH) and formate dehydrogenase (FDH), starting from 5-hydroxymethylfurfural (HMF). In the cascade, HMF is oxidized into 5-formyl-2-furancarboxylic acid (FFCA) by laccase-TEMPO system, and then the resulting intermediate is converted into AMFC by E. coli_TAF via transamination with cheap ammonium formate instead of costly organic amine donors, theoretically generating H2O and CO2 as by-products. The tandem process was run in a one-pot twostep manner, affording AMFC with approximately 81 % yield, together with 10 % 2,5-furandicarboxylic acid (FDCA) as by-product. In addition, the scale-up production of AMFC was demonstrated, with 0.41 g/L h productivity and 8.6 g/L titer. This work may pave the way for green manufacturing of the furan-containing amino acid.

Efficient and straightforward spectrophotometric analysis of 5-hydroxymethylfurfural (HMF) using citrate@Fe3O4 nanoparticles as an adsorbent.

In this study, we developed a spectrophotometry method for the analysis of 5-hydroxymethylfurfuraldehyde (HMF) in pharmaceutical formulations using citrate@Fe3O4 adsorbent. As bare magnetite (Fe3O4) has certain limitations, such as aggregation and oxidation, surface modifications are commonly used to improve its properties. We successfully coated Fe3O4 with sodium citrate to create a magnetic adsorbent for isolating HMF from samples. We confirmed the successful surface coating of Fe3O4 with citrate using Fourier Transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Zeta potential, and scanning electron microscopy (SEM). The high adsorption capacity of citrate@Fe3O4 is due to the abundance of carboxyl and hydroxyl groups on the surface of the adsorbent, making it ideal for HMF extraction. The HMF concentration was then quantified using spectrophotometry. Citrate@Fe3O4 exhibited a high surface area and strong interaction with HMF. We analyzed the individual influential factors affecting the magnetic solid phase extraction (MSPE) setup. Validation parameters were also provided to confirm the reliability of the method. Under optimal parameters, the method exhibited excellent linearity in the range of 0.05-30.00 µg/ml with the lower limit of quantification (LLOQ) of 0.05 µg/ml. Relative standard deviations (RSD) values for precision were better than 10% and the method's trueness were better than 10%. Recoveries were found to be in the range of 85% to 106%, indicating excellent accuracy and reliability. We used this method to identify and measure HMF in six different dextrose pharmaceutical dosage forms as intravenous injectable solutions and three honey samples.

Green Synthesis of UV-Reactive Polycarbonates from Levoglucosenone and 5-Hydroxymethyl Furfural.

This study focuses on the synthesis of fully renewable polycarbonates (PCs) starting from cellulose-based platform molecules levoglucosenone (LGO) and 2,5-bis(hydroxymethyl)furan (BHMF). These unique bio-based PCs are obtained through the reaction of a citronellol-containing triol (Triol-citro) derived from LGO, with a dimethyl carbonate derivative of BHMF (BHMF-DC). Solvent-free polymerizations are targeted to minimize waste generation and promote an eco-friendly approach with a favorable environmental factor (E-factor). The choice of metal catalyst during polymerization significantly influences the polymer properties, resulting in high molecular weight (up to 755 kDa) when Na2 CO3 is employed as an inexpensive catalyst. Characterization using nuclear magnetic resonance confirms the successful incorporation of the furan ring and the retention of the terminal double bond of the citronellol pendant chain. Furthermore, under UV irradiation, the presence of both citronellol and furanic moieties induces singular structural changes, triggering the formation of three distinct structures within the polymer network, a phenomenon herein occurs for the first time in this type of polymer. These findings pave the way to new functional materials prepared from renewable monomers with tunable properties.

Plant-based meat substitute analysis using microextraction with deep eutectic solvent followed by LC-MS/MS to determine acrylamide, 5-hydroxymethylfurfural and furaneol.

For the analysis of plant-based meat substitutes and the determination of Maillard reaction products such as acrylamide, 5-hydroxymethylfurfural and furaneol, a novel and effective procedure based on hydrophobic natural deep eutectic solvent and liquid chromatography coupled with tandem mass spectrometry was developed for the first time. The 49 compositions of the deep eutectic solvents were designed and screened to select the most suitable option. The terpenoids eugenol and thymol in a molar ratio of 2:1 were selected as precursors for solvent formation, allowing effective extraction of the target analytes. The developed procedure comprised two main steps: extraction - in which the analytes are isolated from the solid sample due to the salting-out effect and pre-concentrated in the deep eutectic solvent, and back-extraction - in which the analytes are re-extracted into the formic acid solution for subsequent mass spectrometric detection. As the density of the aqueous phases changed during the extraction and back-extraction steps, the phenomenon of inversion of the coalesced organic phase was observed, which simplified the withdrawing of the phases. The linear range was 1-50 ng/mL for acrylamide, 10-1000 ng/mL for 5-hydroxymethylfurfural and 200-1000 ng/mL for furaneol with coefficients of determination above 0.9952. The developed method was fully validated and found recoveries were in the range 83-120%, with CVs not exceeding 4.9%. The method was applied to real sample analysis of pea-based meat substitutes.

A chemometric study on the identification of 5-methylfurfural and 2-acetylfuran as particular volatile compounds of oxidized fish oil based on SHS-GC-IMS.

Fish oil develops particular off-odors, mainly fishy odor, from the oxidation of its characteristic fatty acids, docosahexaenoic (DHA) and eicosapentaenoic (EPA). Anchovy oil (AO) was taken as representative of fish oils. This was compared to three vegetable oils with different fatty acid compositions, i.e. camellia, sunflower and linseed oil, and differential volatile compounds were identified by static-headspace gas-chromatography ion-mobility-spectrometry (SHS-GC-IMS) and orthogonal partial-least-squares discriminant analysis (OPLS-DA) during oxidation at 60 °C. Three groups of differential volatile compounds detected at higher concentrations in the AO were screened out and two compounds, identified as 5-methylfurfural and 2-acetylfuran, were characteristic to the AO and not found in the vegetable oils. They were formed from both EPA and DHA, only present in the AO, and their formation mechanisms were proposed. The contents of 5-methylfurfural and 2-acetylfuran increased linearly with the oxidation time and consequently they could be used as oxidative markers of fish oils.