Preparation and characterization of hyacinth bean starch film incorporated with TiO2 nanoparticles and Mesona chinensis Benth polysaccharide.

Hyacinth bean starch (HBS) was used to prepare nanocomposite films with the reinforcement agent of nanotitanium oxide (TiO2-N) and Mesona chinensis Benth polysaccharide (MCP). The effects of TiO2-N and MCP on the moisture combination, rheological properties of film-forming solutions (FFS) and physiochemical properties of films were investigated. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) revealed that HBS, TiO2-N and MCP had good compatibility, while no novel absorption peak in FTIR spectra, and characteristic peaks of TiO2-N were found in XRD patterns of composite films. Contact angle of HBS/TiO2-N/M3 film increased from 65.6° to 90.9°, which illustrated that TiO2-N and MCP effectively enhanced hydrophobicity of films. TiO2-N and MCP positively affected anti-UV light ability of HBS films by resisting most of invisible light. Furthermore, stable and compact network structures were formed by the synergistic effect of TiO2-N and MCP, thereby elongation to break was increased from 17.123% to 28.603% significantly, and heat resistance was enhanced clearly. This study prepared a nanocomposite HBS-based films based TiO2-N and MCP, which had guiding significance for development of functional films and combination of polysaccharides and metallic oxide.

Novel composite foam made from starch and water hyacinth with beeswax coating for food packaging applications.

A novel composite foam was prepared from native cassava starch and water hyacinth (WH) by baking in a hot mold. The effects of WH powder content (0, 3, 5, 7 or 10 wt%, dry starch basis) on the properties of the starch foam were investigated. A starch foam formulation with 5 wt% WH powder exhibited the highest flexural stress at maximum load (3.42 MPa), the highest flexural strain (extension) at maximum load (3.52%), the highest modulus (232.00 MPa), the lowest moisture content (6.77%) and the most uniform cell size distribution (0.44 ± 0.09 mm). Moreover, mechanical properties of starch foam with 5 wt% WH powder were better than the same properties of some commercial foams. After being coated with beeswax, the starch foams retained their shape after immersion in distilled water and their water solubility was significantly reduced. Results indicated that a starch foam/5 wt% WH composite with beeswax coating was a biodegradable foam that could possibly replace commercial non-degradable foam.

Green Route for the Removal of Pb from Aquatic Environment.

AIM AND OBJECTIVE: Wastewater treatment/remediation is a very important process that has a great environmental and economic impact. Therefore, it is crucial to innovate different methods to remove pollutants of different sources from wastewater. This work was conducted in order to study the removal of lead (Pb+2) from wastewater using microspheres of composites of sodium alginate, cellulose and chitosan, as well as using a cost-effective green route through composites of sodium alginate and dried water hyacinth. MATERIALS AND METHODS: Molecular modeling at B3LYP/6-31g(d,p) was utilized to study sodium alginate, cellulose and chitosan. Sodium alginate was cross-linked with calcium chloride to form microspheres, then both sodium alginate/cellulose and sodium alginate/chitosan were also crosslinked as 50/50 to form microspheres. The roots of the aquatic plant water hyacinth in dry form were added to the cross-linked sodium alginate for up to 70%. SEM and FTIR were employed to study the surface of the prepared microspheres and their structures respectively. Atomic absorption spectroscopy was used to study the levels of Pb. RESULTS: Molecular modeling indicated that the blending of such structures enhances their ability to bind with surrounding molecules owing to their ability to form hydrogen bonds. SEM results indicated that homogeneous structures of cellulose and chitosan are deformed when blended with sodium alginate, and FTIR confirmed the proper formation of the desired blends. Microspheres from sodium alginate showed the ability to remove Pb+2 from wastewater. SEM indicated further deformation in the morphology with the roughness of sodium alginate/water hyacinth microspheres, while FTIR confirmed the uniform matrices of the microspheres. The removal of Pb+2 was enhanced because of the addition of dried water hyacinth's roots. CONCLUSION: Modeling, experimental and kinetic data highlight sodium alginate/water hyacinth root as a green route to remediate Pb+2 from wastewater.

Identification by Molecular Docking ofHomoisoflavones from Leopoldia comosa as Ligands of Estrogen Receptors.

The physiological responses to estrogen hormones are mediated within specific tissues by at least two distinct receptors, ER and ER. Several natural and synthetic molecules show activity by interacting with these proteins. In particular, a number of vegetal compounds known as phytoestrogens shows estrogenic or anti-estrogenic activity. The majority of these compounds belongs to the isoflavones family and the most representative one, genistein, shows anti-proliferative effects on various hormone-sensitive cancer cells, including breast, ovarian and prostate cancer. In this work we describe the identification of structurally related homoisoflavones isolated from Leopoldia comosa (L.) Parl. (L. comosa), a perennial bulbous plant, potentially useful as hormonal substitutes or complements in cancer treatments. Two of these compounds have been selected as potential ligands of estrogen receptors (ERs) and the interaction with both isoforms of estrogen receptors have been investigated through molecular docking on their crystallographic structures. The results provide evidence of the binding of these compounds to the target receptors and their interactions with key residues of the active sites of the two proteins, and thus they could represent suitable leads for the development of novel tools for the dissection of ER signaling and the development of new pharmacological treatments in hormone-sensitive cancers.

Cellulase-Assisted Extraction of Polysaccharides from White Hyacinth Bean: Characterization of Antioxidant Activity and Promotion for Probiotics Proliferation.

Food-derived polysaccharides have advantages over synthetical compounds and have attracted interest globally for decades. In this study, we optimized the cellulase-assisted extraction of polysaccharides from white hyacinth bean (PWBs) with the aid of response surface methodology (RSM). The optimum extraction parameters were a pH of 7.79, a cellulase of 2.73%, and a ratio of water to material of 61.39, producing a high polysaccharide yield (3.32 ± 0.03)%. The scavenging ability of PWBs varied on three radicals (hydroxyl > 2,2-diphenyl-1-picrylhydrazyl (DPPH) > superoxide). Furthermore, PWBs contributed to the proliferation of three probiotic bacteria (Lactobacillus acidophilus LA5, Bifidobacterium bifidum BB01, and Lactobacillus bulgaricus LB6). These investigations of PWBs provide a novel bioresource for the exploitation of antioxidant and probiotic bacterial proliferation.

Biochemical characterisation of lectin from Indian hyacinth plant bulbs with potential inhibitory action against human cancer cells.

This work describes purification and characterisation of a monocot mannose-specific lectin from Hyacinth bulbs. The purified lectin has a molecular mass of ∼30kDa in reducing as well as in non-reducing SDS-PAGE. In hydrodynamic studies by Dynamic Light Scattering (DLS) showed that purified lectin was monomeric in nature with a molecular size of 2.38±0.03nm. Agglutination activity of purified lectin was confirmed by rabbit erythrocytes and its agglutination activity was inhibited by d-mannose and a glycoprotein (ovalbumin). Glycoprotein nature of purified lectin was confirmed by Periodic Acid Schiff's (PAS) stain. Purified lectin showed moderate pH and thermal stability by retaining hemagglutination activity from pH 6-8 and temperature up to 60°C. It also suppressed the growth of human colon cancer cells (Caco-2) and cervical cancer cells (HeLa) with IC50 values of 127µg/mL and 158µg/mL respectively, after 24-h treatment. Morphological studies of treated cells (Caco-2 and HeLa) with hyacinth lectin by AO/EB dual staining indicated that purified lectin is capable of inducing apoptosis.

Determination of Elemental Composition of Malabar spinach, Lettuce, Spinach, Hyacinth Bean, and Cauliflower Vegetables Using Proton Induced X-Ray Emission Technique at Savar Subdistrict in Bangladesh.

The concentrations of 18 different elements (K, Ca, Fe, Cl, P, Zn, S, Mn, Ti, Cr, Rb, Co, Br, Sr, Ru, Si, Ni, and Cu) were analyzed in five selected vegetables through Proton Induced X-ray Emission (PIXE) technique. The objective of this study was to provide updated information on concentrations of elements in vegetables available in the local markets at Savar subdistrict in Bangladesh. These elements were found in varying concentrations in the studied vegetables. The results also indicated that P, Cl, K, Ca, Mn, Fe, and Zn were found in all vegetables. Overall, K and Ca exhibited the highest concentrations. Cu and Ni exhibited the lowest concentrations in vegetables. The necessity of these elements was also evaluated, based on the established limits of regulatory standards. The findings of this study suggest that the consumption of these vegetables is not completely free of health risks.

Isotope geochemistry. Biological signatures in clumped isotopes of O2.

The abundances of molecules containing more than one rare isotope have been applied broadly to determine formation temperatures of natural materials. These applications of "clumped" isotopes rely on the assumption that isotope-exchange equilibrium is reached, or at least approached, during the formation of those materials. In a closed-system terrarium experiment, we demonstrate that biological oxygen (O2) cycling drives the clumped-isotope composition of O2 away from isotopic equilibrium. Our model of the system suggests that unique biological signatures are present in clumped isotopes of O2­and not formation temperatures. Photosynthetic O2 is depleted in (18)O(18)O and (17)O(18)O relative to a stochastic distribution of isotopes, unlike at equilibrium, where heavy-isotope pairs are enriched. Similar signatures may be widespread in nature, offering new tracers of biological and geochemical cycling.

Humidity independent mass spectrometry for gas phase chemical analysis via ambient proton transfer reaction.

In this work, a humidity independent mass spectrometric method was developed for rapid analysis of gas phase chemicals. This method is based upon ambient proton transfer reaction between gas phase chemicals and charged water droplets, in a reaction chamber with nearly saturate humidity under atmospheric pressure. The humidity independent nature enables direct and rapid analysis of raw gas phase samples, avoiding time- and sample-consuming sample pretreatments in conventional mass spectrometry methods to control sample humidity. Acetone, benzene, toluene, ethylbenzene and meta-xylene were used to evaluate the analytical performance of present method. The limits of detection for benzene, toluene, ethylbenzene and meta-xylene are in the range of ∼0.1 to ∼0.3 ppbV; that of benzene is well below the present European Union permissible exposure limit for benzene vapor (5 µg m(-3), ∼1.44 ppbV), with linear ranges of approximately two orders of magnitude. The majority of the homemade device contains a stainless steel tube as reaction chamber and an ultrasonic humidifier as the source of charged water droplets, which makes this cheap device easy to assemble and facile to operate. In addition, potential application of this method was illustrated by the real time identification of raw gas phase chemicals released from plants at different physiological stages.

Selection of support materials for immobilization of Burkholderia cepacia PCL3 in treatment of carbofuran-contaminated water.

This study investigated the utilization of agricultural matrices as the support materials for cell immobilization to improve the technique of bioremediation. Coir, bulrush, banana stem and water hyacinth stem in both delignified and undelignified forms were used to immobilize Burkholderia cepacia PCL3 in bioremediation of carbofuran at 5 mg l(-1) in synthetic wastewater. Undelignified coir was found to be the most suitable support material for cell immobilization, giving the short half-life of carbofuran of 3.40 d (2.8 times shorter than the treatments with free cells). In addition, it could be reused three times without a loss in ability to degrade carbofuran. The growth and degradation ability of free cells were completely inhibited at the initial carbofuran concentrations of 250 mg l(-1), while there was no inhibitory effect of carbofuran on the immobilized cells. The results indicated a great potential for using the agricultural matrices as support material for cell immobilization to improve the overall efficiency of carbofuran bioremediation in contaminated water by B. cepacia PCL3.