Liquid chromatography tandem mass spectrometric studies of indinavir sulphate and its forced degradation products.

Indinavir sulphate was subjected to forced degradation under hydrolysis (acidic, basic and neutral), oxidation, photolysis and thermal stress as prescribed by ICH guidelines. It was degraded under acidic, basic, neutral and oxidative stress conditions, while it was stable under other conditions. After degradation total eight degradation products were formed. The degradation products were identified and their separation was accomplished on Waters XTerra(®) C(18) column (250 mm × 4.6mm i.d., 5 µm) using 20mM ammonium actate:acetonitrile as (50:50, v/v) mobile phase in an isocratic elution mode by LC. The method was extended to LC-MS/MS for characterization of the degradation products and the fragmentation pathways were proposed. The proposed structures of degradation products were also confirmed by HRMS studies. No previous reports were found in the literature regarding the characterization of degradation products of indinavir sulphate.

UPLC-MS/MS quantification of nanoformulated ritonavir, indinavir, atazanavir, and efavirenz in mouse serum and tissues.

Animal pharmacokinetic and tissue distribution assays of antiretroviral therapeutic drugs require accurate drug quantification in biological fluids and tissues. Here we report a simple, rapid, and sensitive ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for quantification of commonly used antiretroviral drugs ritonavir (RTV), indinavir (IDV), atazanavir (ATV), and efavirenz (EFV) in mouse serum and tissues (liver, kidney, lung, and spleen). These antiretroviral drugs are currently the cornerstones of common therapeutic regimens for human immunodeficiency virus (HIV) infection. Chromatographic separation was achieved using a gradient mobile phase (5% acetonitrile in methanol and 7.5mM ammonium acetate (pH 4.0)) on an ACQUITY UPLC(®)BEH Shield RP 18 column. All compounds eluted within a 7 min run time. Lopinavir was used as an internal standard. Detection was achieved by dual positive and negative ionization modes on a quadrupole linear ion trap hybrid mass spectrometer with an electrospray ionization (ESI) source. The dynamic range was 0.2-1000 ng/mL for RTV, IDV, and ATV, and 0.5-1000 for EFV. The method was validated and showed high and consistent intra-day and inter-day accuracy and precision for all analytes. This method is used to support the preclinical development studies of targeted- and sustained-release combination ART (nanoART). The current data demonstrate a 1.5-4 fold increase in serum and tissue AUC of nanoformulated ATV, RTV, and EFV administered to mice when compared to native drug. In addition, the tested formulation enhanced exposure of the same anti-HIV drugs in mouse tissues.

Validation of a sensitive ion chromatography method for determination of monoethylsulfate in Indinavir sulfate drug substance.

The present study relates to the optimization of an ion chromatography method to determine the content of monoethylsulfate at very low levels in Indinavir sulfate drug substance, and subsequent validation of the method to prove its suitability, reliability and sensitivity. Monoethylsulfate is a potential impurity of Indinavir sulfate, and may forms during the preparation as well as during storage. The ion chromatography method was developed in such a way that to enhance the detection level by introducing suppressor, and minimizing acquisition time by using suitable buffer of 3.2 mmole of sodium carbonate and 1 mmole of sodium hydrogen carbonate in water as eluent. The retention time of monoethylsulfate was about 9.5 min and the total acquisition time was 25 min. The optimized method was validated to prove its performance characteristics by demonstrating selectivity, sensitivity (limit of detection and quantification), linearity, precision and accuracy. The established limit of detection and quantification of monoethylsulfate in Indinavir sulfate by this method was found to be 24 ng/ml and 74 ng/ml respectively, and the overall percent accuracy (recovery) of samples evaluated at different concentration levels was found to be 97.1, indicating the sensitivity and accuracy of this optimized ion chromatography method.

Artificial neural networks in analysis of indinavir and its degradation products retention.

Artificial neural networks (ANN) are biologically inspired computer programs designed to simulate the way in which the human brain processes the information. In the past few years, coupling of experimental design (ED) and ANN became useful tool in the method optimization. This paper presents the application of ED-ANN in analysis of chromatographic behavior of indinavir and its degradation products. According to preliminary study, full factorial design 2(4) was chosen to set input variables for network training. Experimental data (inputs) and results for retention factors from experiments (outputs) were used to train the ANN with aim to define correlation among variables. For networks training multi-layer perceptron (MLP) with back propagation (BP) algorithm was used. Network with the lowest root mean square (RMS) had 4-8-3 topology. Predicted data were in good agreement with experimental data (correlation was higher than 0.9713 for training set). Regression statistics confirmed good ability of trained network to predict compounds retention.

Evaluation of thermal stability of indinavir sulphate using diffuse reflectance infrared spectroscopy.

Indinavir sulphate is a potent and specific protease inhibitor of human immunodeficiency virus (HIV). It is used for the treatment of acquired immune deficiency syndrome (AIDS). At elevated temperature the drug which otherwise remains crystalline undergoes a phase transition to an amorphous phase to form degradation products. In the present study, thermal stability of indinavir sulphate is evaluated using diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. Infrared spectra of the drug before and after the exposure to thermal radiation at different temperatures were acquired in the diffuse reflectance mode using a Fourier transform infrared (FTIR) spectrophotometer. The differential scanning calorimetry (DSC) and the X-ray diffraction (XRD) studies were used as complimentary techniques to adequately implement and assist the interpretation of the infrared spectroscopy results. The DRIFT spectra reveal that the drug remains stable up to 100 degrees C, degrades slightly at 125 degrees C and undergoes complete degradation at about 150 degrees C to produce degradation products. The degradation products can easily be characterized using the infrared spectra.

Quality control of protease inhibitors.

Protease inhibitors (PIs) are potent competitive inhibitors of the human immunodeficiency virus (HIV) widely used in the treatment of the acquired immune deficiency syndrome (AIDS) and prescribed in combination with other antiretroviral drugs. So far ten PIs were approved by the United States Food and Drug Administration (FDA) for the treatment of HIV infection. In this mini review, quality control methods of each PI are discussed on the basis of analytical techniques published in the literature. Special attention is given to summarize the LC methods described for the analysis of the selected PIs in both drug substances and products with the available literature till date.

Hair versus plasma concentrations as indicator of indinavir exposure in HIV-1-infected patients treated with indinavir/ritonavir combination.

Large intra-individual variability in plasma levels may limit the interest of therapeutic drug monitoring based on a single determination. Indinavir concentrations were determined both in plasma and hair samples, and correlated with concomitant plasma HIV-RNA in 43 HIV-infected patients. In multivariate analysis, significant association was found between HIV-RNA below 50 copies/ml and indinavir concentrations in hair but not in plasma, suggesting that hair concentrations gave more extensive information on drug exposure than a single plasma sample.

Electrochemical methods for determination of the protease inhibitor indinavir sulfate in pharmaceuticals and human serum.

Indinavir sulfate is an inhibitor of the human immunodeficiency virus (HIV) protease. The aim of this study was to determine indinavir levels in serum and pharmaceuticals, by means of electrochemical methods using the hanging mercury drop electrode (HMDE). Indinavir exhibited irreversible cathodic waves over the pH range 2.00-12.00 in different supporting electrolytes. The current-concentration plot was rectilinear over the range from 8 x 10(-7) M to 8 x 10(-6) M with a correlation coefficient of 0.996 for differential pulse voltammetry (DPV) and 8 x 10(-7) M to 1 x 10(-5) M with correlation of 0.999 M for osteryoung square ware voltammetry (OSWV) in Britton-Robinson buffer at pH 10.00. The wave was characterized as being irreversible and diffusion-controlled. The proposed methods were fully validated and successfully applied to the determination of indinavir in capsules and spiked human serum samples with good recoveries. The repeatability and reproducibility of the methods as well as precision and accuracy (such as supporting electrolyte, serum samples) were determined. No electroactive interferences from the endogenous substances were found in serum samples.

Evaluation of an International Pharmacopoeia method for the analysis of indinavir sulfate by liquid chromatography.

A gradient LC method for the determination of indinavir sulfate (IDV) and its impurities has been recently published in a consultation document of the International Pharmacopoeia, WHO Drug Information. The method uses a base-deactivated reversed-phase C18 column (25 cm x 4.6 mm i.d.), 5 microm kept at a temperature of 40 degrees C. The mobile phases consist of acetonitrile, phosphate buffer pH 7.5 and water. The flow rate is 1.0 ml/min. UV detection is performed at 220 nm. A system suitability test (SST) is described to govern the quality of the separation. The separation towards IDV components was investigated on 16 C18 columns and correlation was made with the column classification system developed in our laboratory. The method was evaluated using a Hypersil BDS C18 column (25 cm x 4.6 mm i.d.), 5 microm. A central composite design was applied to examine the robustness of the method. The method shows good precision, linearity, sensitivity and robustness. Six commercial samples were examined using this method.

LC-MS/MS determination of the HIV-1 protease inhibitor indinavir in brain and testis of mice.

A rapid and sensitive method for the determination of indinavir in mice brain and testis is described and validation data are provided. Indinavir and the internal standard (IS) amprenavir were isolated from homogenized tissue matrices using a mixed-mode solid-phase extraction (SPE) procedure and were then analyzed by reversed-phase liquid chromatography/tandem mass spectrometry (LC-MS/MS). The mass spectrometer in the positive-ion multiple reaction monitoring mode used pairs of ions at m/z of 614.1/421.3 for indinavir and of 506.1/245.3 for IS. The calibration curves were linear over the range 0.0012-0.0390 micromol/kg for brain and 0.39-12.50 micromol/kg for testis. Linearity, repeatability and accuracy were validated. The applicability of the method was demonstrated by assessing indinavir in brain and testis of three mice dosed with intravenous bolus administration of indinavir (16.3 micromol/kg).

Reversed-phase liquid chromatography with ultraviolet detection for simultaneous quantitation of indinavir and propranolol from ex-vivo rat intestinal permeability studies.

A simple, rapid, sensitive and specific reversed-phase high performance liquid chromatographic (RP-HPLC) method involving ultraviolet detection (lambda = 210 nm) was developed for analysis of indinavir along with propranolol in samples obtained from ex vivo intestinal permeability studies. Chromatography was carried out on C-18 column with mobile phase comprising of phosphate buffer-acetonitrile (68:32, v/v) pumped at flow rate of 1 ml/min. The proposed method has a short run time of 12 min and involves a simple sample preparation for the purpose of reducing permeability model artifacts and to concentrate the samples. Fluorescein was used as internal standard. The proposed method has been validated with regard to specificity, detection limit, recovery, accuracy and precision. For both the drugs, method was found to be selective, linear (R(2) approximately 0.999), accurate (recovery = 100-105%) and precise (<3% R.S.D.) in the range of 2-20 microg/ml. The limit-of-detection and limit-of-quantification of the method were 40 ng/ml and 100 ng/ml for indinavir, and 30 and 80 ng/ml for propranolol, respectively. Indinavir, a widely prescribed HIV protease inhibitor, suffer from bioavailability problems where involvement of P-glycoprotein mediated drug efflux may play a significant role. The proposed method was successfully applied for intestinal permeability of indinavir to estimate the contribution of P-glycoprotein in limiting its oral bioavailability. The advantage of the developed method lies in the simultaneous determination of propranolol, a passive integrity marker, routinely employed in permeability studies and its selectivity in presence of various P-gp modulators and permeability markers.

Spectrophotometric determination of indinavir in bulk and pharmaceutical formulations using bromocresol purple and bromothymol blue.

A simple, sensitive and selective method for the determination of indinavir (IND) in bulk and in pharmaceutical formulations is described. The method is based on extraction of this drug into chloroform as ion-pair with sulphonphthalein dyes as bromocresol purple (BCP) and bromothymol blue (BTB). The optimum conditions of the reactions were studied and optimized. The absorbance of the yellow products was measured at 427 nm for IND-BCP and 420 nm for IND-BTB. The calibration graphs were linear over the range 4.0-60.2 microg x ml(-1) of drug in chloroform, using the two dyes. The composition of the ion-pairs was established by the molar ratio method. For IND the molar ratio was determined to be 1:1 by measurement of first derivative signals at 273 nm. A calibration graph was established for 3.0-70.6 microg x ml(-1) of IND for first derivative spectrophotometry. The developed method was applied successfully for the determination of IND in pharmaceutical formulations. The data obtained were compared the data given by first derivative spectrophotometry. No differences were found.

Capillary electrophoretic method for determination of protease inhibitor indinavir sulfate used in human immunodeficiency virus therapy.

A simple, fast and reliable capillary electrophoresis (CE) method for determination of indinavir sulfate, a potent protease inhibitor used in human immunodeficiency virus (HIV) therapy, in commercial and simulated capsule formulations is described. The analysis was performed in a 75microm i.d. uncoated fused-silica capillary with 27cm length (effective length of 19.4cm) using a 20mmoll-1 phosphate buffer at pH 2.52. Samples were injected hydrodynamically by applying 0.5psi pressure during 2s. The applied voltage was 28kV. Direct UV detection at 214nm led to an adequate sensitivity without interference from sample excipients and known impurities. For quantitative purposes, diazepam was used as internal standard. Under optimized conditions, the migration times for indinavir sulfate and diazepam were 1.06 and 1.66min, respectively. Analytical curve of peak area ratios versus concentration in the range of 20.0-100.0microg/ml gave a coefficient of correlation of 0.9992, establishing the method linearity. The limits of detection and quantitation were 4.61 and 14.0microg/ml, respectively. The within-day precision expressed as relative standard deviation was <1.5% for 10 consecutive sample injections. An average recovery of 100.81+/-0.56% at three concentration levels was obtained. Based on the performance characteristics, the proposed methodology was found suitable for the determination of indinavir sulfate in capsule formulations, presenting additional advantages inherent to the CE technology, such as low consumption of reagents and column endurance.

Integration of knowledge-based metabolic predictions with liquid chromatography data-dependent tandem mass spectrometry for drug metabolism studies: application to studies on the biotransformation of indinavir.

Despite recent advances in the application of data-dependent liquid chromatography/tandem mass spectrometry (LC/MS/MS) to the identification of drug metabolites in complex biological matrixes, a prior knowledge of the likely routes of biotransformation of the therapeutic agent of interest greatly facilitates the detection and structural characterization of its metabolites. Thus, prediction of the [M + H]+ m/z values of expected metabolites allows for the construction of user-defined MS(n) protocols that frequently reveal the presence of minor drug metabolites, even in the presence of a vast excess of coeluting endogenous constituents. However, this approach suffers from inherent user bias, as a result of which additional "survey scans" (e.g., precursor ion and constant neutral loss scans) are required to ensure detection of as many drug-related components in the sample as possible. In the present study, a novel approach to this problem has been evaluated, in which knowledge-based predictions of metabolic pathways are first derived from a commercial database, the output from which is used to formulate a list-dependent LC/MS(n) data acquisition protocol. Using indinavir as a model drug, a substructure similarity search on the MDL metabolism database with a similarity index of 60% yielded 188 "hits", pointing to the possible operation of two hydrolytic, two N-dealkylation, three N-glucuronidation, one N-methylation, and several aromatic and aliphatic oxidation pathways. Integration of this information with data-dependent LC/MS(n) analysis using an ion trap mass spectrometer led to the identification of 18 metabolites of indinavir following incubation of the drug with human hepatic postmitochondrial preparations. This result was accomplished with only a single LC/MS(n) run, representing significant savings in instrument use and operator time, and afforded an accurate view of the complex in vitro metabolic profile of this drug.

Relationship between levels of indinavir in hair and virologic response to highly active antiretroviral therapy.

BACKGROUND: Suboptimal levels of antiretroviral drugs result in virologic failure in HIV-infected patients treated with highly active antiretroviral therapy (HAART). OBJECTIVE: To assess the relationship between levels of indinavir in hair and virologic outcome. DESIGN: Cross-sectional study. SETTING: 7 AIDS clinics in France. PATIENTS: 89 HIV-infected patients who received HAART that included indinavir. MEASUREMENTS: Patients were classified as responders or nonresponders on the basis of viremia at the time of hair collection. In nonresponders, levels of indinavir in hair and resistance mutations in the protease gene were assessed at baseline and at the time of indinavir measurement. RESULTS: Mean indinavir levels (+/-SD) were significantly higher in the 65 responders than in the 24 nonresponders (24.4 +/- 16 microg/g vs. 12.9 +/- 8.6 microg/g) (P < 0.001). Nonresponders with intermediate levels of indinavir in hair had more mutations in the protease gene than did nonresponders with low levels of indinavir in hair. CONCLUSION: Indinavir levels in hair are associated with virologic outcome in patients receiving HAART.

Simultaneous determination of the six HIV protease inhibitors (amprenavir, indinavir, lopinavir, nelfinavir, ritonavir, and saquinavir) plus M8 nelfinavir metabolite and the nonnucleoside reverse transcription inhibitor efavirenz in human plasma by solid-phase extraction and column liquid chromatography.

A sensitive and selective liquid chromatographic assay has been developed for the determination of the six currently protease inhibitors approved by the U.S. Food & Drug Administration (amprenavir, indinavir, lopinavir, nelfinavir, ritonavir, and saquinavir) plus the M8 active metabolite of nelfinavir and the nonnucleoside reverse transcription inhibitor efavirenz in a single run. Pretreatment of 1-mL plasma sample spiked with internal standard was made by a solid-phase extraction procedure using a polymeric reversed-phase sorbent. Liquid chromatography was performed using a narrow-bore C18 reversed-phase column and gradient elution. Double ultraviolet detection at 265 nm (amprenavir) and at 210 nm (all other assayed drugs and internal standard) was used. Calibration curves were linear in the range 25 to 10,000 ng/mL, and the assay has been validated over the range 25 to 5,000 ng/mL. Average accuracies at four concentrations were in the range 92.4% to 103.0% and 94.4% to 103.0% for within-day and between-day, respectively, and the coefficients of variation were less than 8%. Mean absolute recoveries varied from 72.8% (ritonavir) to 93.7% (indinavir). No metabolite of the protease inhibitors was found to coelute with the drugs of interest or with the internal standard. At this time, among the tested drugs, especially all the currently licensed nucleosides and the other nonnucleoside reverse transcription inhibitor nevirapine that can be used in combination with the protease inhibitors, none was found to interfere with the assay.

[Renal lithiasis due to indinavir]. / Litiasis renal secundaria a indinavir.

Indinavir sulphate is a protease inhibitor that has been found to be extremely effective in increasing CD4+ cell counts and in decreasing HIV-RNA titers in patients with HIV and AIDS. However, patients receiving indinavir also have been noted to have a significant risk of developing urolithiasis. Indinavir has high urinary excretion with poor solubility in a physiologic pH solution. The typical symptoms of indinavir urolithiasis are similar to other forms of urolithiasis. Indinavir urolithiasis is unique in that computed tomography, which was once thought to be efficacious in identifying all urinary calculi, is not useful in imaging stones that are composed of pure indinavir. Indinavir urolithiasis generally responds to a conservative regimen of hydration, pain control, and temporary discontinuation of the medication. Only a minority of patients need surgical intervention.

Simultaneous determination of the HIV protease inhibitors indinavir, amprenavir, saquinavir, ritonavir and nelfinavir in human plasma by high-performance liquid chromatography.

A reversed-phase high-performance liquid chromatographic method for the simultaneous quantitative determination of five HIV protease inhibitors (i.e. indinavir, amprenavir, saquinavir, ritonavir and nelfinavir) in human plasma is described. An aliquot of 500 microl plasma was extracted with 0.5 ml of 0.1 M NH4OH and 5 ml of methyl tert.-butyl ether. After evaporating, the residue was dissolved in eluent mixture of acetonitrile and 50 mM KH2PO4 adjusted to pH 5.6 with 50 mM Na2HPO4 (43:57, v/v). Subsequently, the eluent was washed with hexane. Chromatography was performed using a C18 reversed-phase column. Ultraviolet detection at 215 nm was used. Linearity of the method was obtained in the concentration range of 0.05-20 microg ml(-1) for all five protease inhibitors. Our method is now in use to analyse plasma samples from patients treated with co-administration of HIV protease inhibitors.