Impact of manufacturing variables on product performance of contraceptive levonorgestrel intrauterine systems.

The development of Levonorgestrel Intrauterine Systems (LNG-IUSs) stands as a formidable challenge due to their intricate design and reliance on specialized manufacturing methods. Pharmaceutical manufacturers face a labyrinth of process variables that demand precise identification and comprehension to establish a robust product design to ensure consistent performance. The current manuscript navigates through this complexity, describing a small-scale processing method for LNG-IUSs via addition and condensation curing processes, as well as investigating the influence of key manufacturing variables on LNG-IUS product performance. Different mixing speeds and time exhibited distinct impact on drug content uniformity within the IUS drug-polymer reservoirs. Surprisingly, no variation in drug release rates were observed. Curing temperature and time were the critical processing parameters of IUSs which were dependent on the polymer type (polydimethylsiloxane, PDMS) and drug loading. At lower curing temperatures, crosslinking in PDMS remained relatively unaffected, irrespective of drug loading. By contrast, elevating curing temperatures resulted in a drastic reduction in PDMS crosslinking densities at higher drug loading. This was attributed to increased drug volume fraction within the matrix, impeding optimal prepolymer chain mobility and rearrangement which is crucial for complete crosslinking. Interestingly, rapid curing led to increased PDMS crystallinity, thereby retarding drug release rates while concurrently compromising mechanical properties. PDMS curing chemistry, such as condensation cure (no filler) and addition cure (cured at room temperature), did not affect drug release rates of the LNG-IUSs. In the condensation cure-based LNG-IUS, the formulations prepared without filler had higher drug release rates than those containing silica or diatomaceous earth fillers. Overall, the present study unravels the intricate interplay between PDMS characteristics, processing variables, and product performance, offering fundamental insights into product design and manufacturing of brand and generic LNG-IUS products.

Tailoring drug release from long-acting contraceptive levonorgestrel intrauterine systems.

The wide array of polydimethylsiloxane (PDMS) variants available on the market, coupled with the intricate combination of additives in silicone polymers, and the incomplete understanding of drug release behavior make formulation development of levonorgestrel intrauterine systems (LNG-IUSs) formidable. Accordingly, the objectives of this work were to investigate the impact of excipients on formulation attributes and in vitro performance of LNG-IUSs, elucidate drug release mechanisms, and thereby improve product understanding. LNG-IUSs with a wide range of additives and fillers were prepared, and in vitro drug release testing was conducted for up to 12 months. Incorporating various additives and/or fillers (silica, silicone resins, silicone oil, PEG, etc.) altered the crystallization kinetics of the crosslinked polymer, the viscosity, and the microstructure. In addition, drug-excipient interactions can occur. Interestingly, additives which increased matrix hydrophobicity and hindered PDMS crystallization facilitated dissolution and permeation of the lipophilic LNG. The influence of additives and lubricants on the mechanical properties of LNG-IUSs were also evaluated. PDMS chemical substitution and molecular weight were deemed to be most critical polymer attributes to the in vitro performance of LNG-IUSs. Drugs with varying physicochemical characteristics were used to prepare IUSs, modeling of the release kinetics was performed, and correlations between release properties and the various physicochemical attributes of the model drugs were established. Strong correlations between first order release rate constants and both drug solubility and Log P underpin the partition and diffusion-based release mechanisms in LNG-IUSs. This is the first comprehensive report to provide a mechanistic understanding of material-property-performance relationships for IUSs. This work offers an evidence-based approach to rational excipient selection and tailoring of drug release to achieve target daily release rates in vivo. The novel insights gained through this research could be helpful for supporting development of brand and generic IUS products as well as their regulatory assessment.

Levonorgestrel-protected Au8 and Au10 clusters with different antimicrobial abilities.

Gold nanoclusters exhibit significant potential in antimicrobial applications due to their good stability and desirable biocompatibility in the mammalian cell model. However, most of the previously reported gold nanocluster antimicrobial agents do not have an atomic-precise structure, causing difficulties in understanding the structure-property correlation. In this study, structurally defined gold-levonorgestrel clusters, named Au8(C21H27O2)8 (Au8NCs) and Au10(C21H27O2)10 (Au10NCs), with the same ligand-to-metal ratio but different inner cores were prepared for antibacterial activity investigations, demonstrating that Au8NCs exhibited a stronger antibacterial activity owing to the more significant damage it causes on the bacteria wall and membrane, and a stronger inhibition of glutathione reductase activity in bacteria. The leakage of the intracellular components and enzyme inhibition caused an imbalance of the intracellular antioxidant defence system, and consequently killed bacteria. These results indicated that the structure of gold nanoclusters has an important effect on their biological activity, indicating that it as a key factor to consider in the future design of antimicrobial agents.

Steroidal Antagonists of Progesterone- and Prostaglandin E1-Induced Activation of the Cation Channel of Sperm.

The cation channel of sperm (CatSper) is the principal entry point for calcium in human spermatozoa and its proper function is essential for successful fertilization. As CatSper is potently activated by progesterone, we evaluated a range of steroids to define the structure-activity relationships for channel activation and found that CatSper is activated by a broad range of steroids with diverse structural modifications. By testing steroids that failed to elicit calcium influx as inhibitors of channel activation, we discovered that medroxyprogesterone acetate, levonorgestrel, and aldosterone inhibited calcium influx produced by progesterone, prostaglandin E1, and the fungal natural product l-sirenin, but these steroidal inhibitors failed to prevent calcium influx in response to elevated K+ and pH. In contrast to these steroid antagonists, we demonstrated for the first time that the T-type calcium channel blocker ML218 acts similarly to mibefradil, blocking CatSper channels activated by both ligands and alkalinization/depolarization. These T-type calcium channel blockers produced an insurmountable blockade of CatSper, whereas the three steroids produced antagonism that was surmountable by increasing concentrations of each activator, indicating that the steroids selectively antagonize ligand-induced activation of CatSper rather than blocking channel function. Both the channel blockers and the steroid antagonists markedly reduced hyperactivated motility of human sperm assessed by computer-aided sperm analysis, consistent with inhibition of CatSper activation. Unlike the channel blockers mibefradil and ML218, which reduced total and progressive motility, medroxyprogesterone acetate, levonorgestrel, and aldosterone had little effect on these motility parameters, indicating that these steroids are selective inhibitors of hyperactivated sperm motility. SIGNIFICANCE STATEMENT: The steroids medroxyprogesterone acetate, levonorgestrel, and aldosterone selectively antagonize progesterone- and prostaglandin E1-induced calcium influx through the CatSper cation channel in human sperm. In contrast to T-type calcium channel blockers that prevent all modes of CatSper activation, these steroid CatSper antagonists preferentially reduce hyperactivated sperm motility, which is required for fertilization. The discovery of competitive antagonists of ligand-induced CatSper activation provides starting points for future discovery of male contraceptive agents acting by this unique mechanism.

RP-HPLC method validation for fast extraction and quantification of Levonorgestrel drug from silicone based intrauterine device intended for in-process and finished formulation.

BACKGROUND: To develop and validate a simple and consistent reversed phase high performance liquid chromatography (RP-HPLC) method for the estimation of Levonorgestrel (LNG) drug from silicone based intrauterine device. METHODS: Sample solution was prepared using tetrahydrofuran (THF) as solvent for the drug extraction, and RP-HPLC analysis was performed using Luna C18 analytical column (150 × 4.6 mm, 5 µm, 100 Å - Phenomenex), with a mobile phase consisting of a mixture of acetonitrile and water (50:50, v/v) at a flow rate of 1.0 ml/min and injection volume of 20 µl. Detection was carried out at 241 nm in PDA detector, with a total run time of 15 min. The method was validated in accordance with ICH guidelines. Method applicability was tested for optimizing formulation using quality-by-design approach, to check the stability and content uniformity of levonorgestrel-silicone mixture (core blend), and quantifying the amount of LNG from commercially available silicone based formulation. RESULTS: The retention time for LNG drug was obtained at 8.5 min (± 0.3 min). A linear relationship was observed over the concentration range of 2.6-15.6 µg/ml with the correlation coefficient (r) value 0.9999. The method was found to be precise within the acceptable limit (RSD < 2%) and the drug recovery from the intrauterine device was found in the range 99.78-100.0%. Content uniformity for different prototypes developed was observed in the range of 91.6-101.4%, and assay of optimized core blend was in the range of 97.78-106.79% during the 10 days of retention period for stability studies. CONCLUSION: The validated method is found to be a simple, accurate, precise, reproducible, and hence can be used for the routine analysis of LNG such as in-process, quality control and stability assays of silicone based intrauterine devices by RP-HPLC.

A new metabolite from Cunninghamella blakesleeana-mediated biotransformation of an oral contraceptive drug, levonorgestrel.

Cunninghamella blakesleeana-mediated biotransformation of an oral contraceptive drug, levonorgestrel (1), yielded a new metabolite, 13ß-ethyl-17α-ethynyl-10,17ß-dihydroxy-4,6-dien-3-one (2), and two known metabolites 3 (13ß-ethyl-17α-ethynyl-10ß,17ß-dihydroxy-4-en-3-one), and 4 (13ß-ethyl-17α-ethynyl-6ß,17ß-dihydroxy-4-en-3-one) at an ambient temperature using aqueous media. Hydroxylation and dehydrogenation of compound 1 was observed during the bio-catalytic transformation. The structure of a new metabolite 2 was determined by 1H, 13C, and 2DNMR and HR-EIMS spectroscopic techniques.

Impact of product design parameters on in vitro release from intrauterine systems.

Polydimethylsiloxane (PDMS)-based levonorgestrel intrauterine systems (LNG-IUSs) contain a large amount of potent LNG, and therefore it is important to understand the impact of product design parameters on the in vitro and in vivo performance to ensure safety and efficacy, as well as to avoid serious side effects resulting from dose dumping. LNG-IUS is a complex drug-device combination product, and its formulation design, requires consideration of additional factors such as device configuration and dimensions, in addition to formulation and processing parameters. In this study, ten qualitatively (Q1) and quantitatively (Q2) equivalent LNG-IUSs were manufactured with differences in source (supplier) and dimensions (i.e., thickness) of the outer membrane, drug particle size, dimensions of the drug reservoir (i.e., inner diameter), as well as configuration of the entire IUS. A real-time in vitro release testing method was developed for the LNG-IUSs. In addition, an accelerated release testing method was developed using hydro-alcoholic media in order to reduce the time associated with formulation design. Source variations and thickness of their outer membranes had a great impact on the in vitro drug release from the LNG-IUSs. It was demonstrated that the thicker the outer membrane, the slower the drug release rate. The physicochemical properties of the outer membranes obtained from different sources were characterized to understand their impact on the in vitro drug release of the LNG-IUSs. The composition and mechanical strength may play a role in differences in drug release. The LNG-IUS formulation prepared with the larger drug particle size showed a slightly slower daily release rate. The drug release rates from the compositionally equivalent LNG-IUSs linearly correlated to the surface area of the corresponding drug reservoirs. Another factor that affected the drug release rate was the configuration of the entire IUS. It was shown that the placement of the outer membrane was significant, i.e. whether the ends of the drug reservoir were covered or not. It is important to note that real-time release showed zero-order release kinetics over the test period of approximately 900 days. The current study provides a comprehensive understanding of the impact of product design parameters on the in vitro drug release of LNG-IUSs. In addition, the developed real-time and accelerated release testing methods showed good discriminatory ability for compositionally equivalent LNG-IUSs prepared using different product design parameters.

Transient analysis of drug delivery from a toroidal membrane: Applications for medicated vaginal rings.

A mathematical construct is proposed to analyze drug released from matrix-type vaginal rings. This work is intended to support experimental studies and promote the fabrication of these devices. The transport of a dissolved drug through a toroidal membrane was predicted using diffusion equations and their solutions. This dynamic framework led to the estimation of the time elapsed before releasing 98% of the ethynodiol diacetate from the polymer. Closed-form expressions, easily adaptable to spreadsheet implementation, were developed to simulate the controlled delivery of levonorgestrel initially dispersed in a silicone vaginal ring. As the loading increased, a greater amount of medication was delivered. However, the fractional release decreased from 32.6% to 23.1% when the dosage changed from 4.137 g/cm3 to 8.274 mg/cm3. The expressions were further simplified for thin rings.

Towards a dapivirine and levonorgestrel multipurpose vaginal ring: Investigations into the reaction between levonorgestrel and addition-cure silicone elastomers.

With a dapivirine-releasing vaginal ring having successfully completed late-stage clinical testing for HIV prevention and currently undergoing regulatory review, there is now growing interest in next-generation multipurpose prevention technologies that seek to combine antiretroviral and contraceptive drugs within a single product. Here, we focus on ongoing efforts to develop a silicone elastomer vaginal ring releasing both dapivirine and levonorgestrel. Specifically, we evaluate various strategies aimed at both better understanding and reducing the tendency of levonorgestrel to bind with the elastomer, including: (i) formulation and post-manufacturing strategies aimed at reducing the extent of levonorgestrel reaction with addition-cure silicone elastomers; (ii) evaluation of a simple silicone system to model the complex elastomer; (iii) use of model compounds representing the enone and ethinyl moieties of levonorgestrel to probe the mode of addition of levonorgestrel to addition-cure silicone elastomers; and (iv) solution and solid-state 13C NMR analysis to probe the structural features of the levonorgestrel-silicone system. The results demonstrate that both the enone and ethinyl groups within levonorgestrel undergo hydrosilylation reactions with the hydrosiloxane groups in the silicone elastomer leading to covalent binding. The results also highlight potential strategies for further optimising the dapivirine + levonorgestrel silicone vaginal ring formulation to ensure that the levonorgestrel is available for release.

Atomically Precise Gold-Levonorgestrel Nanocluster as a Radiosensitizer for Enhanced Cancer Therapy.

Gold nanoclusters have become promising radiosensitizers due to their ultrasmall size and robust ability to adsorb, scatter, and re-emit radiation. However, most of the previously reported gold nanocluster radiosensitizers do not have a precise atomic structure, causing difficulties in understanding the structure-activity relationship. In this study, a structurally defined gold-levonorgestrel nanocluster consisting of Au8(C21H27O2)8 (Au8NC) with bright luminescence (58.7% quantum yield) and satisfactory biocompatibility was demonstrated as a nanoradiosensitizer. When the Au8NCs were irradiated with X-rays, they produced reactive oxygen species (ROS), resulting in irreversible cell apoptosis. As indicated by in vivo tumor formation experiments, tumorigenicity was significantly suppressed after one radiotherapy treatment with the Au8NCs. In addition, compared with tumors treated with X-rays (4 Gy) alone, tumors treated with the nanosensitizer exhibited an inhibition rate of 74.2%. This study contributes to the development of atomically precise gold nanoclusters as efficient radiosensitizers.

Assessment of endocrine disruptor effects of levonorgestrel and its photoproducts: Environmental implications of released fractions after their photocatalytic removal.

The presence of levonorgestrel (LNG) in water bodies via direct discharge and human excretion has been reported worldwide, but its effects on the reproduction of aquatic species and humans are still unknown. Owing to its recalcitrant properties, LNG is not completely removed during wastewater treatment plants, and many species may be exposed to low traces of this compound from discharged effluents. Thus, in this study, a photocatalytic process for removing LNG along with screening of endocrine disruptor effects for risk assessment was applied. Although the removal rate of LNG by ultraviolet C (UV-C) radiation was >90%, reproductive toxicity testing using the BeWo cell line exposed to LNG and its degraded fraction showed the reduced production of basal human chorionic gonadotropin hormone (ß-hCG) by more than 73%, from 8.90 mIU mL-1 to <2.39 mIU mL-1, with both LNG and the degraded fraction. ß-hCG hormone has been implicated in the viability of trophoblastic cells during the first trimester of pregnancy; therefore, degraded fractions and waterborne LNG may affect reproduction in some aquatic species and humans with low level of exposure.

Degradation Kinetics and Transformation Products of Levonorgestrel and Quinestrol in Soils.

Levonorgestrel (LNG) and quinestrol (QUN) are typical endocrine disruptors that enter the soil via sewage irrigation and sludge return. However, the fates of both compounds in soil are not well-understood. Laboratory microcosm studies were conducted to fill the gap of understanding of LNG and QUN behavior in soils. High values of goodness-of-fit indices (GFIs) were obtained using the double-first-order in parallel (DFOP) model and the single-first-order (SFO) model to fit the degradation kinetics of LNG and QUN in soils, respectively. The end-points (DT50 and DT90) of LNG and QUN were positively correlated with soil total organic carbon (TOC). Soil water content and temperature were observed to be critical factors in degradation of LNG and QUN. The degradation rates of LNG and QUN were very slow under sterile and flooded conditions, indicating that the aerobic microbial degradation was dominant in the degradation of LNG and QUN. Moreover, major transformation products were identified, and biodegradation pathways of LNG and QUN were proposed. The present study is expected to provide basic information for ecological risk assessment of LNG and QUN in the soil compartment.

The fate of prazosin and levonorgestrel after electrochemical degradation process: Monitoring by-products using LC-TOF/MS.

Prazosin (PRZ) and levonorgestrel (LNG) are widely used as an anti-disease drugs due to their biological activity in the human body. The frequent detection of these compounds in water samples requires alternative technologies for the removal of both compounds. After electrochemical degradation of PRZ and LNG, the parent compounds could be completely removed after treatment, but the identification and characterization of by-products are necessary as well. In this study, the effects of NaCl concentration and applied voltage were investigated during the electrochemical degradation process. The results revealed that the increase of NaCl concentration and applied voltage could promote the generation of hypochlorite OCl- and then enhance the degradation of PRZ and LNG. After initial study, 6V and 0.2g NaCl were selected for further experiments (96% and 99% removal of PRZ and LNG after 40min, respectively). Energy consumption was also evaluated and calculated for PRZ and LNG at 3, 6 and 8V. Solid phase extraction (SPE) method plays an important role in enhancing the detection limit of by-products. Furthermore, characterization and identification of chlorinated and non-chlorinated by-products were conducted using an accurate liquid chromatography-time of flight/mass spectrometry LC-TOF/MS instrument. The monitoring of products during the electrochemical degradation process was performed at 6V and 0.2g NaCl in a 50mL solution. The results indicated that two chlorinated products were formed during the electrochemical process. The toxicity of by-products toward E. coli bacteria was investigated at 37°C and 20hr incubation time.

Manufacturing and characterization of long-acting levonorgestrel intrauterine systems.

Mirena® is long-acting (5 years) contraceptive intrauterine device. It is composed of a hollow cylindrical drug reservoir (containing Levonorgestrel and polydimethylsiloxane), which is covered with a release rate controlling silicone membrane. This structure presents a manufacturing challenge and to date, there have been no literature reports on the manufacturing, product design and quality evaluation of these hollow cylindrical intrauterine devices. It is vital to develop a reproducible and robust manufacturing process for these long-acting intrauterine devices or systems to obtain an understanding the in vitro and in vivo performance of such drug-device combinations. In this study, a twin-syringe method with a customized mold was developed to manufacture hollow cylindrical polydimethylsiloxane (PDMS)-based levonorgestrel intrauterine systems (LNG-IUSs). Different mold materials, curing temperatures and times were screened to fabricate PDMS-drug reservoirs with good quality characteristics (easy demolding, good appearance and appropriate physicochemical characteristics). The prepared PDMS-drug reservoirs were covered with the release rate controlling membrane to fabricate the LNG-IUSs. Physicochemical characterization (drug content and content uniformity, powder X-Ray diffraction (PXRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FTIR) of the PDMS-drug reservoirs with different drug loadings (10%, 25% and 50% w/w) was conducted. Real-time in vitro drug release testing of LNG-IUSs with different drug loading was performed in normal saline (0.9% w/v NaCl) at 37 °C using a water bath shaker rotating at 100 rpm. The prepared PDMS-drug reservoirs demonstrated good and reproducible quality characteristics including appearance (smooth surfaces), targeted drug loading and good drug content uniformity in the PDMS matrix. The PXRD showed that the crystallinity of the API was maintained inside the PDMS matrix. DSC, TGA and FTIR confirmed the structure of the drug and the PDMS, indicating no interaction between the drug and the PDMS matrix in the prepared LNG-IUSs. Real-time in vitro drug release from the LNG-IUSs with different drug loadings showed zero-order release kinetics, and the drug release rate (based on daily release percentage) was inversely proportional to the drug loading.

Esters of levonorgestrel and etonogestrel intended as single, subcutaneous-injection, long-lasting contraceptives.

An effort with the goal of discovering single-dose, long-lasting (>6 months) injectable contraceptives began using levonorgestrel (LNG)-17-ß esters linked to a sulfonamide function purposed as human carbonic anhydrase II (hCA 2) ligands. One single analog from this first series showed noticeably superior anti-ovulatory activity in murine models, and a subsequent structure-activity relationship (SAR, the relationship between a compound's molecular structure and its biological activity) study based on this compound identified a LNG-phenoxyacetic acid ester analog exhibiting longer anti-ovulatory properties using the murine model at 2 and 4 mg dose than medroxyprogesterone acetate (MPA). The same ester function linked to etonogestrel (ENG) furnished a compound which inhibited ovulation at 2 mg for 60 days, the longest duration of all compounds tested at these doses. By comparison, MPA at the same dose inhibited ovulation for 32 days.

Development, validation and utilization of a highly sensitive LC-MS/MS method for quantification of levonorgestrel released from a subdermal implant in human plasma.

Levonorgestrel (LNG) is a synthetic progestin that is available in oral contraceptive tablets, a subdermal implant, and an intrauterine system for contraception. LNG pharmacokinetics are a pivotal determinant of contraceptive efficacy and essential in assessing drug-drug interactions influencing LNG exposure following different routes of LNG administration. A highly sensitive LC-MS/MS method was developed and validated to quantify levonorgestrel in human plasma. Liquid-liquid extraction was utilized with a sample volume of 500 µL to extract levonorgestrel from plasma. Chromatographic separation of LNG was achieved with a Fortis™ C18 (3 µm: 100 mm × 2.1 mm) reverse phase analytical column. The mobile phases consisted of de-ionized water plus 0.1% NH4OH (100:0.1%, v/v) (A), and methanol plus 0.1% NH4OH (100:0.1%, v/v) (B) delivered as a gradient at a flow rate of 400 µL/min. Detection of LNG and internal standard (D-(-)-norgestrel-d7) was achieved using positive polarity mode monitoring at 313.2-245.2 amu and 320.1-251.2 amu, respectively. The assay was linear over the calibration range of 49.6 to 1500 pg/mL. This method was used to quantify plasma LNG released by subdermal implant in support of a drug interaction study among women with HIV receiving efavirenz- or nevirapine-based antiretroviral therapy.

A comparison of progestins within three classes: Differential effects on learning and memory in the aging surgically menopausal rat.

INTRODUCTION: For decades, progestins have been included in hormone therapies (HT) prescribed to women to offset the risk of unopposed estrogen-induced endometrial hyperplasia. However, the potential effects on cognition of subcategories of clinically used progestins have been largely unexplored. METHODS: In two studies, the present investigation evaluated the cognitive effects of norethindrone acetate (NETA), levonorgestrel (LEVO), and medroxyprogesterone acetate (MPA) on the water radial-arm maze (WRAM) and Morris water maze (MM) in middle-aged ovariectomized rats. RESULTS: In Study 1, six-weeks of a high-dose NETA treatment impaired learning and delayed retention on the WRAM, and impaired reference memory on the MM. Low-dose NETA treatment impaired delayed retention on the WRAM. In Study 2, high-dose NETA treatment was reduced to four-weeks and compared to MPA and LEVO. As previously shown, MPA impaired working memory performance during the lattermost portion of testing, at the highest working memory load, impaired delayed retention on the WRAM, and impaired reference memory on the MM. NETA also impaired performance on these WRAM and MM measures. Interestingly, LEVO did not impair performance, but instead enhanced learning on the WRAM. CONCLUSIONS: The current study corroborates previous evidence that the most commonly prescribed FDA-approved progestin for HT, MPA, impairs learning and memory in the ovariectomized middle-aged rat. When progestins from two different additional subcategories were investigated, NETA impaired learning and memory similarly to MPA, but LEVO enhanced learning. Future research is warranted to determine LEVO's potential as an ideal progestin for optimal health in women, including for cognition.

Controlling levonorgestrel binding and release in a multi-purpose prevention technology vaginal ring device.

Despite a long history of incorporating steroids into silicone elastomers for drug delivery applications, little is presently known about the propensity for irreversible drug binding in these systems. In this study, the ability of the contraceptive progestin levonorgestrel to bind chemically with hydrosilane groups in addition-cure silicone elastomers has been thoroughly investigated. Cure time, cure temperature, levonorgestrel particle size, initial levonorgestrel loading and silicone elastomer type were demonstrated to be key parameters impacting the extent of levonorgestrel binding, each through their influence on the solubility of levonorgestrel in the silicone elastomer. Understanding and overcoming this levonorgestrel binding phenomenon is critical for the ongoing development of a number of drug delivery products, including a multi-purpose technology vaginal ring device offering simultaneous release of levonorgestrel and dapivirine - a lead candidate antiretroviral microbicide - for combination HIV prevention and hormonal contraception.

Automated hollow fiber microextraction based on two immiscible organic solvents for the extraction of two hormonal drugs.

In this research, a rapid efficient and automated instrument based on hollow fiber liquid-phase microextraction (HF-LPME) followed by high performance liquid chromatography (HPLC) with UV-vis detection was applied for the preconcentration and determination of two hormonal drugs (megestrol acetate and levonorgestrel) in water and urinary samples. n-Dodecane was used as the supported liquid membrane (SLM) and methanol was used as the acceptor phase in the hollow fiber lumen. The effects of different parameters such as fiber length, extraction time, stirring rate, and ionic strength on the extraction efficiency were investigated using modified simplex and central composite design as the screening and optimization methods, respectively. The composition effect of SLM and type of acceptor phase were optimized separately. For adjustment of the SLM composition, trioctylphosphine oxide (TOPO) was chosen. Under optimized condition, the calibration curves were linear (r(2)>0.997) in the range of 0.5-200 µg L(-1). LOD for both of the drugs were 0.25 µg L(-1). The applicability of this technique was examined by analyzing drugs in water and urine samples. The relative recoveries of the drugs were in the range of 86.2-102.3% that show the capability of the method for the determination of the drugs in various matrices.

Are pharmaceuticals with evolutionary conserved molecular drug targets more potent to cause toxic effects in non-target organisms?

The ubiquitous use of pharmaceuticals has resulted in a continuous discharge into wastewater and pharmaceuticals and their metabolites are found in the environment. Due to their design towards specific drug targets, pharmaceuticals may be therapeutically active already at low environmental concentrations. Several human drug targets are evolutionary conserved in aquatic organisms, raising concerns about effects of these pharmaceuticals in non-target organisms. In this study, we hypothesized that the toxicity of a pharmaceutical towards a non-target invertebrate depends on the presence of the human drug target orthologs in this species. This was tested by assessing toxicity of pharmaceuticals with (miconazole and promethazine) and without (levonorgestrel) identified drug target orthologs in the cladoceran Daphnia magna. The toxicity was evaluated using general toxicity endpoints at individual (immobility, reproduction and development), biochemical (RNA and DNA content) and molecular (gene expression) levels. The results provide evidence for higher toxicity of miconazole and promethazine, i.e. the drugs with identified drug target orthologs. At the individual level, miconazole had the lowest effect concentrations for immobility and reproduction (0.3 and 0.022 mg L-1, respectively) followed by promethazine (1.6 and 0.18 mg L-1, respectively). At the biochemical level, individual RNA content was affected by miconazole and promethazine already at 0.0023 and 0.059 mg L-1, respectively. At the molecular level, gene expression for cuticle protein was significantly suppressed by exposure to both miconazole and promethazine; moreover, daphnids exposed to miconazole had significantly lower vitellogenin expression. Levonorgestrel did not have any effects on any endpoints in the concentrations tested. These results highlight the importance of considering drug target conservation in environmental risk assessments of pharmaceuticals.