Removal of Azo Dyes from Water Using Natural Luffa cylindrica as a Non-Conventional Adsorbent.

Reducing high concentrations of pollutants such as heavy metals, pesticides, drugs, and dyes from water is an emerging necessity. We evaluated the use of Luffa cylindrica (Lc) as a natural non-conventional adsorbent to remove azo dye mixture (ADM) from water. The capacity of Lc at three different doses (2.5, 5.0, and 10.0 g/L) was evaluated using three concentrations of azo dyes (0.125, 0.250, and 0.500 g/L). The removal percent (R%), maximum adsorption capacity (Qm), isotherm and kinetics adsorption models, and pH influence were evaluated, and Fourier-transform infrared spectroscopy and scanning electron microscopy were performed. The maximum R% was 70.8% for 10.0 g L-1Lc and 0.125 g L-1 ADM. The Qm of Lc was 161.29 mg g-1. Adsorption by Lc obeys a Langmuir isotherm and occurs through the pseudo-second-order kinetic model. Statistical analysis showed that the adsorbent dose, the azo dye concentration, and contact time significantly influenced R% and the adsorption capacity. These findings indicate that Lc could be used as a natural non-conventional adsorbent to reduce ADM in water, and it has a potential application in the pretreatment of wastewaters.

Green biodegradable dielectric material made from PLA and electron beam irradiated luffa cylindrica fiber: devices for a sustainable future.

The growing prevalence of polymer-based plastics in the environment is an imminent risk to the natural world. As an immediate consequence of this, extensive research has been launched over the course of the past few decades in an effort to reduce the damage that manmade plastics cause to the natural environment. The current study attempts to explore the biodegradability of polylactic acid (PLA), a bio-compatible plastic, by incorporating small amount of electron beam irradiated natural fibers (2 to 10%) derived from luffa cylindrica (LC) at varying irradiation doses (0.5 Gy, 1 Gy, and 2 Gy). Natural fiber surface treatment using electron beam irradiation is effective and environmentally friendly. The biodegradation of composites was studied for 90 days in sand, soil, compost, brackish water, fresh water, salt water, and bacterial and fungal conditions. Maximum decomposition was observed in the composite sample (PLA/10% wt of LC fiber at 2.0 Gy) at 15.42% and 4.73% in bacterial and soil environments. X-ray diffraction (XRD) and Raman spectroscopy validated the fiber and PLAs crystallinity and molecular interaction. The derivative thermo-gravimetric curve (DTGA) showed that electron beam irradiation removed moisture, hemicelluloses, and lignin from hydrophilic fibers. The incorporation of LC fibers into the bio-composites resulted in an increase in the glass transition temperature (Tg), melting temperature (Tm), and crystallization temperature (Tc). Additionally, after LC fiber reinforcement, the composites' dielectric properties were enhanced.

Novel 3D carbon fibers derived from Luffa wastes for oil/water separation.

In this study, the 3D structure of carbon fibers (CFs) was prepared from Luffa sponge wastes by H3PO4 impregnation with various ratios and a low-temperature carbonization process at 500 °C in a nitrogen atmosphere. The H3PO4-treated Luffa sponge had higher thermal stability and carbonic yield (∼60-70%) than neat-Luffa (∼21%). Characterization analyses exposed that the synthesized CFs derived from H3PO4-treated Luffa exhibited oleophilic and hydrophobic carbonic nature with 3D sponge skeletal, reflecting an ideal structure for oil sorption. The engine oil sorption properties on the CFs were studied by varying the contact time. The engine oil sorption equilibrium data for 3D CFs samples was explained by the pseudo-second-order and intraparticle diffusion models. The equilibrium oil sorption capacities of 3D CFs were as large as 23.1 ± 0.4 g/g for engine oil, 23.7 ± 1.0 g/g for gasoline, 28.1 ± 1.0 g/g for almond oil, and 29.2 ± 0.8 g/g for pomegranate seed oil in 20 min. Moreover, the optimized 3D CFs can be selectively for oil/water separation applications, such as high capacities for various oils, fast kinetic sorption, and reusability (>6 cycles). This research presented a facile and cost-effective process for the 3D CFs through recycling Luffa sponge wastes for rapid oil sorption.

A SNP of betaine aldehyde dehydrogenase (BADH) enhances an aroma (2-acetyl-1-pyrroline) in sponge gourd (Luffa cylindrica) and ridge gourd (Luffa acutangula).

Luffa is a genus of tropical and subtropical vines belonging to the Cucurbitaceae family. Sponge gourd (Luffa cylindrica) and ridge gourd (Luffa acutangula) are two important species of the genus Luffa and are good sources of human nutrition and herbal medicines. As a vegetable, aromatic luffa is more preferred by consumers than nonaromatic luffa. While the aroma trait is present in the sponge gourd, the trait is not present in the ridge gourd. In this study, we identified Luffa cylindrica's betaine aldehyde dehydrogenase (LcBADH) as a gene associated with aroma in the sponge gourd based on a de novo assembly of public transcriptome data. A single nucleotide polymorphism (SNP: A > G) was identified in exon 5 of LcBADH, causing an amino acid change from tyrosine to cysteine at position 163, which is important for the formation of the substrate binding pocket of the BADH enzyme. Based on the identified SNP, a TaqMan marker, named AroLuff, was developed and validated in 370 F2 progenies of the sponge gourd. The marker genotypes were perfectly associated with the aroma phenotypes, and the segregation ratios supported Mendelian's simple recessive inheritance. In addition, we demonstrated the use of the AroLuff marker in the introgression of LcBADH from the aromatic sponge gourd to the ridge gourd to improve aroma through interspecific hybridization. The marker proved to be useful in improving the aroma characteristics of both Luffa species.

An in vitro evaluation of luffa cylindrica stem sap in preadipocytes and dermal fibroblasts.

BACKGROUND: Luffa cylindrica stem sap (LuCS) has been ethnopharmacologically used as a cosmetic ingredients to improve the facial condition in Asians, but there is no scientific proof about the advantages of LuCS as a supplement for skin elasticity inducer. PURPOSE: Presently, we have validated the beneficial effect of LuCS in human preadipocyte and fibroblast. METHODS: In vitro activities of LuCS on expression of cellular elastin and collagen type I were validated using Western blot analysis in human fibroblasts. Effect of LuCS on preadipocyte development was performed using MDI medium containing isobutyl-methylxanthine, dexamethasone, and insulin and then evaluated using oil red O staining. RESULTS: Treatment of LuCS stimulated the expression of cellular elastin and type I procollagen in human skin fibroblasts. Exposure to LuCS induced lipid accumulation of preadipocytes via activation of CEBP/α signaling pathway in preadipocytes. Expression of collagen I, elastin, or CEBP/α mRNA was decreased by age. 3-bromo-3-methylisoxazol-5-amine enhanced the synthesis of cellular lipid in preadipocytes. CONCLUSIONS: Collectively, these results suggest the rationale of LuCS treatment in enhancing the skin condition.

Preparation of a sustainable bio-copolymer based on Luffa cylindrica cellulose and poly(ɛ-caprolactone) for bioplastic applications.

In this research, a bio-based graft copolymer (LCC-g-PCL) based on the cellulose of Luffa cylindrica (LCC) main chain possessing poly(ɛ-caprolactone) (PCL) pendant groups is synthesized through a grafting from approach via ring-opening polymerization (ROP). For this purpose, LCC, extracted from luffa sponges by combined method, is utilized for ROP of ɛ-caprolactone (ɛ-CL) as a macro-initiator in the presence of stannous octoate as a catalyst. Fourier transform infrared (FT-IR), proton and carbon nuclear magnetic resonance (1H NMR and 13C NMR) spectroscopies are utilized to structurally indicate the success of ROP, while the achieved graft copolymer is analyzed in detail by comparing with LCC and neat PCL in terms of wettability, thermal and degradation behaviors by conducting water contact angle (WCA) measurements, thermogravimetric and differential scanning calorimetry analyses (TGA and DSC) and in vitro both hydrolytic and enzymatic biodegradation tests, respectively. The results of conducted tests show that the incorporation of PCL groups on LCC provide the increasing hydrophobicity. In addition, the degradation behavior of the LCC-g-PCL copolymer is found to be more pronounced under enzymatic medium rather than hydrolytic conditions. It is anticipated from the results that LCC-g-PCL can be a potential eco-friendly material particularly in bioplastic industry.

Green Biosynthesis, Antioxidant, Antibacterial, and Anticancer Activities of Silver Nanoparticles of Luffa acutangula Leaf Extract.

Studies on green biosynthesis of newly engineered nanoparticles for their prominent medicinal applications are being the torch-bearing concerns of the state-of-the-art research strategies. In this concern, we have engineered the biosynthesized Luffa acutangula silver nanoparticles of flavonoid O-glycosides in the anisotropic form isolated from aqueous leave extracts of Luffa acutangula, a popular traditional and ayurvedic plant in south-east Asian countries. These were structurally confirmed by Ultraviolet-visible (UV-Vis), Fourier transform infrared spectroscopy accessed with attenuated total reflection (FTIR-ATR) spectral analyses followed by the scanning electron microscopic (SEM) and the X-ray diffraction (XRD) crystallographic studies and found them with the face-centered cubic (fcc) structure. Medicinally, we have explored their significant antioxidant (DPPH and ABTS assays), antibacterial (disc diffusion assay on E. coli, S. aureus, B. subtilis, S. fecilis, and S. boydii), and anticancer (MTT assay on MCF-7, MDA-MB-231, U87, and DBTRG cell lines) potentialities which augmented the present investigation. The molecular docking analysis of title compounds against 3NM8 (DPPH) and 1DNU (ABTS) proteins for antioxidant activity; 5FGK (Gram-Positive Bacteria) and 1AB4 (Gram-Negative Bacteria) proteins for antibacterial activity; and 4GBD (MCF-7), 5FI2 (MDA-MB-231), 1D5R (U87), and 5TIJ (DBTRG) proteins for anticancer activity has affirmed the promising ligand-protein binding interactions among the hydroxy groups of the title compounds and aspartic acid of the concerned enzymatic proteins. The binding energy varying from -9.1645 to -7.7955 for Cosmosioside (1, Apigenin-7-glucoside) and from -9.2690 to -7.8306 for Cynaroside (2, Luteolin-7-glucoside) implies the isolated compounds as potential bioactive compounds. In addition, the performed studies like QSAR, ADMET, bioactivity properties, drug scores, and toxicity risks confirmed them as potential drug candidates and aspartic acid receptor antagonists. This research auxiliary augmented the existing array of phytological nanomedicines with new drug candidates that are credible with multiple bioactivities.

Evaluating the effect of Luffa cylindrica stem sap on dermal fibroblasts; An invitro study.

Luffa cylindrica stem sap (LuCS) has been traditionally used as a facial cosmetic supplement to enhance the skin condition of Asians. However, LuCS has yet to be described and there is no solid scientific evidence regarding the use of LuCS as an anti-wrinkle agent. In the present study, we have evaluated the functional effect of LuCS and its underlying mechanisms based on scientific evidence. Treatment with LuCS stimulated the growth and migration of human skin fibroblasts. LuCS treatment activated EGFR signaling via the enhanced expression of EGFR and down-regulation of PPARγ in human skin fibroblasts. Exposure to LuCS induced the synthesis of cellular type I procollagen and elastin in consort with the down-regulation of various proteinases including MMP-1, -2 and -9 in human skin fibroblasts. LuCS treatment also reversed the skin damage induced by UV-A irradiation in human skin fibroblasts. 3-bromo-3-methylisoxazol-5-amine was identified as the functional component using UPLC-MS-MS analysis and increased production of cellular type I procollagen. Collectively, these results suggest the efficacy of LuCS supplementation in improving the skin condition via anti-wrinkle effect.

Development of a biosponge based on Luffa cylindrica and crosslinked chitosan for Allura red AC adsorption.

A new bioadsorbent from Luffa cylindrica and cross-linked chitosan was proposed in the present study. Luffa was used as a natural support medium for chitosan crosslinked with glutaraldehyde (LCsG) and epichlorohydrin (LCsE). Biosponges were applied to remove Allura red from aqueous solutions. LCsG and LCsE were produced using different concentrations of chitosan (1%, 3% and 5% (m v-1)) and crosslinking agents (0.5%, 1.0% and 1.5% (v v-1)). Based on the FT-IR spectra, functional groups characteristic of chitosan crosslinked with glutaraldehyde and epichlorohydrin confirmed the crosslinking. In addition, the biosorbent revealed highly efficient functional groups and morphology with irregularities favorable for adsorption. It was found that the increase in the percentage of glutaraldehyde and epichlorohydrin increased the sample's swelling degree, and the degree of cross-linking was greater than 80% for all LCsG. The results regarding the degree of swelling and degree of crosslinking corroborated with the evaluation of the biosponge's adsorptive potential. The Sips model predicted the equilibrium isotherms, with a maximum adsorption capacity of 89.05 mg g-1 for LCsG and 60.91 mg g-1 for LCsE. The new procedure was successful. Luffa was excellent support for chitosan, resulting in an attractive, low-cost bioadsorbent, preventing renewable sources.

Luffa operculata at a late period of gestation dysregulates melatonin and cytokines interfering with weight of dams and their male offspring.

ETHNOPHARMACOLOGICAL RELEVANCE: The tea made with the fruits of Luffa operculata (L.) Cogn. (Cucurbitaceae; EBN) is popularly used as abortive. AIM OF THE STUDY: The present work aimed at accessing how the exposition of female Wistar rats to 1.0 mg/kg of EBN (experimental group, EG), or distilled water (control group, CG), by gavage, at gestational days (GD) 17-21 interfered with the reproductive performance, and with dams' behavior after weaning. MATERIALS AND METHODS: At post-natal day 2 (PND2), the number of male and female pups was evaluated, as well as their weight. After weaning (PND21), dams were euthanized, and their liver and kidneys were removed for histological and biochemical analyses, while the blood was used in the evaluation of cytokines IL-1α, IL-1ß, IL-6 and TNF-α, corticosterone, adrenocorticotrophic hormone, melatonin, AST, ALT and creatinine levels. RESULTS AND DISCUSSION: Dams that were treated with EBN showed an anxiety-like behavior, weight loss at the end of gestation and weight gain at weaning, accompanied with a significant decrease in pro-inflammatory cytokines and in the melatonin level. No significant histological or biochemical alterations have occurred in the liver or kidneys. The number of female pups was significantly higher in the EG. The male pups showed weight gain at PND60. CONCLUSION: The presence of cucurbitacins is probably involved in the dysregulations that were found, due to their polycyclic steroid triterpene structure.

SARS-CoV-2 main protease inhibition by compounds isolated from Luffa cylindrica using molecular docking.

In this study, chemical investigation of methanol extract of the air-dried fruits of Luffa cylindrica led to the identification of a new δ-valerolactone (1), along with sixteen known compounds (2-17). Their chemical structures including the absolute configuration were elucidated by extensive spectroscopic analysis and electronic circular dichroism analysis, as well as by comparison with those reported in the literature. For the first time in literature, we have examined the binding potential of the isolated compounds to highly conserved protein, Mpro of SARS-CoV-2 using the molecular docking technique. We found that the isolated saponins (14-17) bind to the substrate-binding pocket of SARS-CoV-2 Mpro with docking energy scores of -7.13, -7.29, -7.47, and -7.54 kcal.mol-1, respectively, along with binding abilities equivalent to an already claimed N3 protease inhibitor (-7.51 kcal.mol-1).

Influence of chemical treatment and drying method on the properties of cellulose fibers of luffa sponge.

The exploration of modified luffa sponge (LS) cellulose fiber in the field of polymer composite can contribute to the development of high-performance and lightweight composites. In this study, two chemical treatments (10%NaOH-20%CH3COOH (Method 1) and 10%NaOH-5%Na2SO3 (Method 2)) and two drying methods (air drying and freeze-drying) were used to treat LS. The microscopic characteristics and physical properties showed that Methods 1 and 2 caused shrinkage of the LS fibers and increased their fiber density by 30.6% and 15.0%. Meanwhile, freeze-drying kept the cells of modified LS fibers full and decreased their fiber density by 5.0% and 21.0%, respectively. The tensile properties test analyses indicated that freeze-drying further increased the elongation at break values of modified LS fibers by 25.3% and 17.7%, respectively. The moisture absorption analyses showed that freeze-drying could further decrease the moisture absorption ratios of modified LS fibers by 25.8% and 35.8%, respectively, which was useful for improving the dimensional stability of composite materials. Moreover, the thermogravimetric analysis reveals that freeze-drying increased onset degradation temperatures of the modified fibers by 24.0 °C and 6.7 °C, which was beneficial to improve the thermal stability of the composite material.

The Molecular Characterization and Biological Assessment of the Leaves Extracts of Loofah Reveal their Nutraceutical Potential.

BACKGROUND: Luffa cylindrica is a plant that is widely distributed in Africa and Asia and can be grown in regions with tropical or subtropical climates. Few patents dealt with Loofah biological properties, including some functional foods formulated from its leaves. OBJECTIVE: This study aimed to structurally and functionally characterize the bioactive compounds of L. cylindrica leaves grown in two different environments. METHODS: The extracts of L. cylindrica leaves collected from two Tunisian locations: Essouasi (LE), a semi-arid region and Medenine (LM), an arid region, were investigated for their phenolic compounds and fatty acids using HPLC/TOF-MS and GC-MS techniques, respectively. Furthermore, the antioxidant capacity was evaluated with DPPH, Chelating effect, Hydroxyl radical and Superoxide anion scavenging activities while the anticancer activity against HeLa cell lines was assessed using xCELLigence real time cell analyzer and lactate dehydrogenase cytotoxicity assay. RESULTS: The antiproliferative capacity of both extracts was time and dose-dependent, with LE presenting the lowest HeLa cell index (CI = 0.035 ± 0.018, 250 µg/ml). LE also showed the best cytotoxic capacity (56.49 ± 0.8%) and antioxidant potential (IC50 = 54.41 ± 1.12 µg/ml for DPPH and 12.12 ± 0.07 µg/ml for chelating effect). 14 phenolic compounds were detected in LE, with ferulic acid being the major compound (5128.5 ± 4.09 µg Phenols/g), while LM had only 6 phenolics. GCMS analysis showed the presence of omega-3 fatty acids in LE. CONCLUSIONS: Our findings suggest that L. cylindrica leaves, especially when collected from semiarid regions, are promising for formulating nutraceuticals of interest.

Cytotoxic and Apoptotic Effects of Luffa Cylindrica Leaves Extract against Acute Lymphoblastic Leukemic Stem Cells.

BACKGROUND: Acute lymphoblastic leukemia (ALL) is an aggressive malignancy defined by accumulation of lymphoblasts in the bone marrow. Leukemic stem cells (LSCs) are the major cause of the recurrence and metastasis of ALL. This study aimed to develop an effective anti-cancer agent targeting these LSCs. Luffa Cylindrica (L.C.) leaves extract was selected to evaluate its effect on ALL via eradicating the LSCs as it contains many active anti-cancer flavonoids. METHODS: Thirty-two bone marrow samples of ALL patients were used in this study. LSCs population was identified in the selected samples. Cell viability was measured by MTT assay and flow cytometry. Cell cycle, apoptosis, proliferation marker; ki-67 and colony forming assay were further analyzed. RESULTS: This study revealed the expression of CD34+/CD38+ cells in addition to CD34+/CD38- population and the extract was effective against the two LSCs populations. MTT assay showed that treated leukemic cells exhibited significant reduction in the viable cells in a dose dependent manner with IC50 of 3 µg/µl which was then confirmed by flow cytometry. Cell cycle analysis results showed significant reduction in the percentage of cells treated with L.C. extract in both the S and G0/G1 phases, with concomitant increase in the G2/M phase. Also, L.C. extract could effectively induce apoptosis, inhibit proliferation and suppress colonogenecity of leukemic cells. CONCLUSION: This study validated the medicinal potential of L.C. leaves extract as a promising anti-leukemic agent targeting both LSCs and blasts in ALL patients, which may be explained by the synergy found between its potent flavonoids especially apigenin, luteolin and kaempferol.

Characterization of potential cellulose fiber from Luffa vine: A study on physicochemical and structural properties.

The purpose of this study is to investigate the natural Luffa vine (LV) fiber to be effectively used as cellulose fiber reinforcing material for lightweight and decay-resistance composite materials. The physical, chemical, thermal, and morphological properties of the LV fibers, together with their microstructure are investigated. The test results conclude that the LV density, microscopic characteristics, and mechanical properties show that this crop is a lightweight (200-550 kg/m3) natural fiber with a porous structure and a high specific modulus (1.18-2.04 MPa∙ m3/kg). The chemical, X-ray diffraction and the Fourier transform infrared spectroscopy analyses indicate that the LV has a high lignin content (25.18%) and a relatively high relative crystallinity (37.18%) of cellulose, and it contains saponins, which increase its erosion resistance and hardness. The thermogravimetric analysis reveals that the fibers can stand up to 315.4 °C. Moreover, due to their kinetic activation energy of 63.9 kJ/mol, they can be used as reinforcement materials in thermoplastic green composites with a working temperature below 300°.

Study on biodegradability and thermal behaviour of composites using poly lactic acid and gamma-irradiated fibres of Luffa cylindrica.

Surface modification of natural fibres by gamma irradiation is an economical and potent technique. The biodegradability of gamma irradiated Luffa cylindrica (LC) fibres having response of doses (0.5Gy, 1Gy and 2Gy) is studied. The degradation process is carried out in various environments like compost, sand, soil, salt water, brackish water and sweet water for a period of 90 days and microbial degradation using bacteria and fungi for a period of 90 days. The rate of biodegradation was calculated by measuring the loss of weight of composites at an interval of 30 days in each environmental condition. Preliminary results reported that the bacterial environment was the most prominent medium for degradation than fungi. B8 composites showed degradation of 27.5% and 3.59 in bacterial and fungal medium respectively. A minimum degradation was observed in compost medium (0.29%, 2.52%, 0.21%, 0.08%, 0.11%, 0.13%, 0.17%, 1.25% and 1.51% for B1-B9 respectively). For exploring the use of the composites in the field of biomedical sciences, the LC fibres are modified using calcium salts before reinforcement. The thermal properties like crystallization temperature (Tcc), glass transition temperature (Tg), melting peak temperature (Tm) and thermal stability of the bio-composites were analyzed using Differential scanning calorimetry (DSC) in temperature range from 30 °C to 250 °C and the thermogravimetric analysis (TGA) was done in the temperature range of 20 °C to 700 °C. With increase in irradiation dose, crystallization temperature and glass transition temperature increased. Increasing in the irradiation dose, thermal stability of the composites decreased.

Iron and zirconium modified luffa fibre as an effective bioadsorbent to remove arsenic from drinking water.

Porous luffa plant fibre (LF) was grafted with Fe and Zr, and the ability of the fabricated adsorbents to remove arsenate (As(V)) from water was investigated in batch and column adsorption experiments. The Langmuir adsorption capacity (mg g-1) at pH 7 of LF was found to be 0.035, which increased to 2.55 and 2.89 after being grafted with Fe (FLF-3) and Zr (ZLF-3), respectively. Grafting with Fe and Zr increased the zeta potential and zero point of charge (ZPC) of LF (from pH 3.9 to 7.4 for Fe grafting and to 7.6 for Zr grafting), due to chemical bonding of the metals, possibly with the hydroxyl and carboxylic groups in LF as indicated in FTIR peaks. Zeta potential and ZPC decreased after As adsorption owing to inner-sphere complexation mechanism of adsorption. The increase of pH from 3 to 10 progressively reduced the adsorbents' adsorption capacity. Co-existing anions weakened the As(V) removal efficiency in the order, PO43- > SiO32- > CO32- > SO42-. Adsorption kinetics data fitted well to the Weber and Morris model, which revealed initial fast and subsequent slow rates of intra-particle As diffusion into the bigger pores and smaller pores, respectively. Column adsorption data fitted well to the Thomas model with the predicted adsorption capacities in the same order as in the batch adsorption experiment (ZLF-3 > FLF-3 > LF).

The modulation of Luffa cylindrica (L.) Roem supplementation on gene expression and amino acid profiles in liver for alleviating hepatic steatosis via gut microbiota in high-fat diet-fed mice: insight from hepatic transcriptome analysis.

Luffa cylindrica is a nutrient-dense vegetable with medical properties and can alleviate metabolic diseases. Numerous evidences demonstrated gut microbiota impacted the progress of nonalcoholic fatty liver disease (NAFLD). This study was to investigate the underlying mechanism of L. cylindrica supplementation against NALFD via gut microbiota from hepatic transcriptional and metabolic analysis. In diet-induced obese mice, we observed L. cylindrica supplementation (2 g/kg body weight) effectively alleviated high-fat diet-induced obese symptoms such as body weight, fat deposition, and insulin resistance. Notably, L. cylindrica supplementation significantly relieved hepatic steatosis and inflammation infiltration to decrease hepatic toxicity. RNA-sequencing analysis showed that 130 hepatic genes in total significantly altered responding to L. cylindrica supplementation. And signaling pathway analysis revealed that L. cylindrica supplementation down-regulated the transcriptional expressions of CD36 and Rxrg to inhibit hepatic lipid synthesis. Moreover, L. cylindrica supplementation increased the transcriptional expressions of Ass1, Cps1, Cth, Got1, Tat, and Gls2 to enhance amino acid levels (Gly, Ala, Pro, Val, Ile, Asn, Met, and Phe) and improve hepatic abnormal gluconeogenesis. Furthermore, in antibiotic-treated obese mice, L. cylindrica supplementation did not change these gene expressions along with the hepatic levels of lipid and amino acids. Taken together, L. cylindrica supplementation could effectively suppress hepatic steatosis in diet-induced obese mice through inhibiting lipid synthesis and enhancing amino acid levels in liver, which depended on gut microbiota. Thus, L. cylindrica might be one promising dietary supplementation targeting at gut microbiota to reduce NAFLD risk.

Impact of succussion on pharmaceutical preparations analyzed by means of patterns from evaporated droplets.

The aim of the present study was to investigate if patterns obtained from evaporating droplets of pharmaceutical preparations reveal the impact of succussion on such medicinal products. For this purpose, five pharmaceutical preparations (Echinacea 10-2, Baptisia 10-3, Baptisia 10-4, Luffa 10-4, and Spongia 10-6) were prepared according to the European Pharmacopoeia guidelines for the production of homeopathic remedies, in three variants each: with varying numbers of succussion strokes (i) 100, (ii) 10 (succussed samples), and (iii) zero (gently mixed, unsuccussed sample). System stability was studied by means of systematic positive control experiments. Patterns were evaluated by means of computerized image analysis regarding grey level distribution, texture, and fractality. For all investigated pharmaceutical preparations, significant differences were found between the succussed and gently mixed samples; whereas, all three samples (prepared with 100, 10 and zero succussion strokes) could be significantly differentiated for Luffa 10-4 and Spongia 10-6 for one image evaluation parameter each. Control experiments showed a reasonable stability of the experimental set-up.

Loofah-derived activated carbon supported on nickel foam (AC/Ni) electrodes for the electro-sorption of ammonium ion from aqueous solutions.

Activated carbon (AC), prepared from dried loofah sponge, was supported on nickel foam to fabricate AC/Ni electrodes. The characteristics of ammonium electrosorption on AC/Ni electrodes was studied. Results showed that AC prepared in one-step activation (without pre-pyrolysis), i.e., OAC, had relatively low crystallinity, high mesoporosity, and high specific capacitance compared to those made in two-step carbonation followed by activation. Adsorption and desorption density of NH4+ were measured at constant potential of -1.0 V (vs. Hg/HgO) and +0.1 V (vs. Hg/HgO), respectively. Non-faradaic charging contributed to the electrochemical storage and adsorption of ammonium ions on the AC surface with a maximal charge efficiency of 80%, at an applied potential of -1.0 V (vs. Hg/HgO). Multiple-layer adsorption isotherm better described the electrosorption of ammonium ion on OAC/Ni electrodes yielding a maximum adsorption capacity of 6 mg-N g-1, which was comparable with other similar systems. Overall, results clearly demonstrated the effect of synthesis strategy on the capacitive charging behaviors of AC/Ni electrodes and its relationship to NH4+ electrosorption.