Los bloques gemelos en el tratamiento de las maloclusiones clase III. Revisión / Twin blocks in the treatment of class III malocclusions. Review

El tratamiento de las maloclusiones clase III en pacientes en crecimiento suele realizarse con aparatos de ortopedia intraoral o extraoral. El objetivo fue analizar el uso de los bloques gemelos en el tratamiento de las maloclusiones de clase III. Se realizó una revisión sistemática siguiendo los lineamientos PRISMA versión 2009. Las búsquedas se realizaron en las bases de datos Pubmed, Embase, Scopus y Cochrane, así como en una base de datos de literatura gris, y se complementaron con búsquedas manuales. Se incluyeron cinco artículos de los cuales se registraron las siguientes variables: autor, año de publicación, país y resultados. De acuerdo a la bibliografía revisada, los bloques gemelos clase III constituyen una opción terapéutica que producen una mejoría de la estética facial al modificarse la relación esquelética máxilomandibular, la relación de oclusión dentaria anterior y la posición de los tejidos blandos(AU)

Treatment of class III malocclusions in growing patients is usually performed with intraoral or extraoral braces. The objective was to analyze the skeletal changes by treating class III malocclusions with twin blocks. A systematic review was carried out following the PRISMA 2009 version guidelines. Searches were carried out in the Pubmed, Embase, Scopus and Cochrane databases, as well as in a gray literature database, and were supplemented by hand searches. Five articles were included, of which the following variables were recorded: author, year of publication, country, and results. According to the reviewed bibliography, class III twin blocks constitute a therapeutic option that produces an improvement in facial aesthetics by modifying the maxillomandibular skeletal relationship, the anterior dental occlusion relationship, and the position of the soft tissues(EU)

Multidisciplinary treatment with a customized lingual appliance for an adult patient with severe Class III malocclusion and multiple missing teeth.

A 24-year-old man presented with a severe skeletal class III malocclusion, associated with an anterior and posterior crossbite in the left side, upper and lower lip eversion, skeletal asymmetry, midline discrepancy, diastemas in the maxillary and mandibular dental arches, and agenesis of maxillary lateral incisors and canines with retained deciduous teeth. Treatment was performed with the use of the Win Lingual System. When the 0.016 × 0.022-inch NiTi archiwire was applied, the deciduous teeth were extracted and replaced with temporary crowns connected to the appliance. After the aligning, leveling, and diastema closure phases, a modified Le Fort II osteotomy, a mandibular setback with a bilateral sagittal split osteotomy and a genioplasty were performed. Implants were placed in the canine site through a flapless guided surgery, and cantilevered temporary bridges were delivered. Final prosthetic rehabilitation included veneers for the central incisors and zirconia-ceramic cantilevered bridges for the canine and lateral incisors. After 36 months of active treatment, the patient showed an Angle Class I molar and canine relationship and an ideal overbite and overjet. His profile had improved, lips were competent, and gingival levels were acceptable. The lateral radiograph and cephalometric analysis showed a good balance of the skeletal pattern, a good profile of the soft tissue, and proper inclinations of the maxillary and mandibular incisors in relation to maxilla and mandible. After 2 years of follow-up, the patient had a pleasant smile and no relapse, or joint or muscular pain.

Evaluations of the tongue and hyoid bone positions and pharyngeal airway dimensions after maxillary protraction treatment.

OBJECTIVE: To assess changes in the tongue and hyoid bone positions and airway dimensions after maxillary protraction using lateral cephalograms. METHODS: Lateral cephalograms were obtained before (C0) and after (C1) an observation period for untreated children with skeletal Class I malocclusion and before (T0), immediately after (T1), and one year after (T2) maxillary protraction in children with skeletal Class III malocclusion. Cephalometric measurements were compared between the time points in both patient groups. RESULTS: Immediately after maxillary protraction, the tongue moved superiorly and the nasopharyngeal and superior oropharyngeal airway dimensions increased. No significant changes in the middle or inferior oropharyngeal airway dimensions or in the hyoid bone position were noted after treatment. CONCLUSIONS: Maxillary protraction improved tongue posture and modified the nasopharyngeal and superior oropharyngeal airway dimensions in patients with skeletal Class III malocclusion. Consequently, maxillary protraction may restore the intra- and extraoral balance and improve respiratory function.

Kooperation von Kieferorthopädie, Kieferchirurgie und Prothetik bei der umfassenden Rehabilitation von DysgnathiepatientInnen. Teil 1: Fallbeispiel Klasse-III-Malokklusion, Unterkiefer-Schaltlücken.

In a case report the stomatognathic rehabilitation of a patient with class III malocclusion and mandibular bilateral interdental gaps from the diagnosis and treatment planning through to the stepwise realization of the orthodontic, surgical and prosthetic treatment is presented. Explicit information about the proposed treatment, risks and the prospective outcome beforehand ensured the patient’s compliance during the extensive procedure.

Determination of vertical dimension in prosthodontic rehabilitation of a growing patient with severe oligodontia.

CASE REPORT: This report describes the oral rehabilitation of a young boy with severe oligodontia of primary dentition and complete anodontia of permanent dentition, treated by complete maxillary and partial mandibular removable dentures. Since the determination of a proper occlusal vertical dimension in paediatric patients is often difficult, treatment was achieved by means of a multidisciplinary approach involving conventional prosthodontic principles combined with cephalometric analysis and growth prediction. After a follow-up of two years a second lateral cephalogram was taken to evaluate the developmental changes in craniofacial morphology and the superimpositions method was performed, showing an improvement of both sagittal and vertical relationship between basal bones. In this case, the early prosthetic treatment resulted in enhanced aesthetics and masticatory function as well as skeletal growth changes.

Occlusal rehabilitation of pseudo-class III patient.

To treat a patient with anterior crossbite, the clinician should first assess if it is a genuine class III or a pseudo-class III malocclusion. Cephalometric analysis is important; however, registering a patient's centric relation (CR) is simple, quick, and costless and can play a decisive role in a differential diagnosis for this type of patient profile. This clinical report depicts a patient clinically diagnosed as class III. After mandible manipulation in CR, it was noted that the patient in question was a pseudo-class III. The treatment was based on the pseudo-class III diagnosis. Therefore, the patient was rehabilitated by occlusal adjustments and conventional and implant-supported prostheses and without the need for invasive orthognathic surgery.

Avances en la planificación de casos tratados con ortodoncia y cirugía ortognática. Parte 1. / Advances in planning the cases treated with orthodontics and orthognathic surgery. Part 1

En estos artículos los autores presentan una nueva línea de instrumentos de precisión usados en el procedimiento de laboratorio para la preparación de modelos set-up, corrección de modelos set-up y cirugía de modelos de acuerdo con el plan de tratamiento ortodóncico y quirúrgico. Se describen en este artículo el Set-Up Model Maker (SUM), el Occlusal Plane Reference (OPR) y el Surgical Model Accuracy Device (SMAD), y se explica su utilización a través del tratamiento de un caso clínico con clase III esquelética y mordida abierta...

In these articles the authors introduce a new line of precision instruments used in the laboratory procedure for set-up models preparation, set-up models correction and model surgery according to the orthodontic and surgery treatment plan. The Set-Up Model Maker (SUM), the Occlusal Plane Reference (OPR) and the Surgical Model Accuracy Device (SMAD) are described in this article, and its use is explained through the case report of a treatment of a skeletal class III case with open bite...

Eight-year follow-up of a fixed-detachable maxillary prosthesis utilizing an attachment system: clinical protocol for individuals with skeletal class III malocclusions.

The aim of this article is to describe a successful clinical protocol for prosthodontic rehabilitation of a patient with a skeletal Class III malocclusion using a fixed-detachable maxillary prosthesis supported by 6 implants and the MK1 attachment system. The patient was followed up for 8 years. A 46-year-old edentulous woman with a skeletal Class III malocclusion expressed dissatisfaction with her old existing maxillary denture from an esthetic point of view and frustration regarding its function. A fixed-detachable maxillary prosthesis using the MK1 attachment system was made. The patient was followed up clinically and radiographically for 8 years. No bone loss, fracture of prosthetic components, or fracture of the prosthesis was detected in that period. A fixed detachable maxillary prosthesis using the MK1 attachment system is a treatment option for patients with Class III malocclusions who opt not to undergo orthognathic surgery.

[Prosthetic rehabilitation in patient with forced class III malocclusion].

The paper presents clinical case of 63 years old edentulous patient with slight class III malocclusion. For 15 years he was using inadequately fabricated dentures causing forced severe class III malocclusion. Forced progeny was corrected by newly fabricated dentures which restored normal orofacial function and facial harmony.

[Comprehensive treatment of patient with class III malocclusion complicated by partial teeth absence].

The article presents the results of planning and comprehensive treatment of a patient with class III malocclusion complicated by partial teeth absence. Split osteotomy of the mandible improved the relationship of dental arches facilitating complete oral restorative rehabilitation with adequate functional load distribution and esthetic harmony.

Prosthodontic rehabilitation for a patient with acromegaly.

Acromegaly is a condition which results from an excess of growth hormone produced by the pituitary gland after epiphyseal plate closure at puberty. The most common cause of acromegaly is a benign pituitary adenoma. Acromegaly is characterised by enlargement of the hands, feet, nose and ears; expansion of the skull and pronounced brow protrusion. From an oral standpoint, the most relevant symptoms are mandibular protrusion, spacing of the lower teeth and macroglossia. A 46 year-old patient was referred to University Dental School and Hospital by her General Dental Practitioner. The patient had been diagnosed with acromegaly and was receiving medical care from a consultant endocrinologist. The patient was partially dentate with only her lower anterior dentition remaining. She was wearing a complete upper denture but was unable to function effectively due to a lack of occlusal support. Treatment comprised non-surgical periodontal management, construction of upper and lower removable prostheses in a class III relationship and composite restorations on the remaining lower teeth.

An implant-supported overdenture design with a horizontal path of insertion.

The rehabilitation of the atrophic maxilla by means of implant-supported prostheses cannot always be achieved with fixed prostheses because of anatomic, esthetic, or economic issues, so for some patients the treatment of choice is a removable prosthesis. This article analyzes a new design for implant-supported overdentures with horizontal or faciolingual insertion. Its retention system is based on frictional forces or stepped interlocking horizontal surfaces and is appropriate for patients with skeletal Class II or III relationships with severe maxillary atrophies. The design facilitates implant-prosthetic hygiene and improved esthetics in patients with nonparallel implants by hiding abutment screws.

Spring-bite: a new device for jaw motion rehabilitation. A case report.

The present paper describes the design features, potential indications and a clinical application of a newly designed device for jaw motion rehabilitation, the Spring-Bite. This device is characterized by a first class lever mechanism, which allows performing passive jaw motion rehabilitation at constant load without an active participation by the patient. Spring-Bite was developed for the management of temporomandibular joint (TMJ) hypomobility and its application may be much useful in the post-operatory phases of TMJ or orthognathic surgeries as well as in patients with reduced muscular force.

[Dental implants in complex oral rehabilitation in patients with class III occlusion and partial teeth loss].

To prove the efficiency of dental implantation in complex treatment of patients with class III malocclusion and partial teeth loss. Nine patients aged 18-35 years with class III malocclusion and partial teeth loss were included in the study. All patients received two-step treatment involving orthodontic correction with two-step implantation and provisional restorations placement followed by orthognatic surgery procedure. The patients were followed-up for three years with no recurrent malocclusion or implant failure revealed, thus proving dental implantation to be useful tool in complex oral rehabilitation of patients with class III malocclusion and partial teeth loss.

Two-phase orthodontic treatment of a complex malocclusion: giving up efficiency in favor of effectiveness, quality of life, and functional rehabilitation?

The interceptive orthodontic treatment of patients with complex dentofacial abnormalities is frequently inefficient and produces less than ideal outcomes. Therefore, postponing therapy to a single-phase surgical-orthodontic approach might be considered a reasonable option. However, other relevant aspects of the patient's quality of life, such as possible psychosocial problems and functional impairments, should also be considered before deciding whether to intercept a severe dentofacial malocclusion while the patient is still growing, or wait and treat later. This case report describes the nonsurgical treatment of a young patient with a severe Class III open-bite malocclusion associated with a cervical cystic lymphangioma. Despite the poor interceptive therapy prognosis, a 2-phase approach was effective. A reflection about giving up efficiency in favor of effectiveness, functional rehabilitation, and the patient's quality of life is included.

Oral rehabilitation of an edentulous patient using two-segment le fort I repositioning and implant-supported fixed prostheses.

Anteroposterior (AP) deficiencies present a restorative treatment challenge. Complex, multidisciplinary planning is necessary for the success of the treatment. This clinical report describes an approach to managing a complex complete oral rehabilitation of an edentulous patient with skeletal transverse and AP deficiencies with a history of facial trauma to the left zygomaticomaxillary complex. This was further complicated by a hopeless remaining dentition and pneumatization of the maxillary sinuses. Treatment included initial bony augmentation of the vertically and horizontally deficient maxilla, dental implant placement, provisional restoration in a Class III malocclusion with bilateral posterior crossbite, and Le Fort I osteotomy with transverse widening and advancement to correct the skeletal deficiency. Definitive restoration was accomplished with implant-supported fixed prostheses that provided ideal facial balance and occlusion.

Myofunctional and speech rehabilitation after orthodontic-surgical treatment of dento-maxillofacial dysgnathia.

OBJECTIVES: The lingual dysfunctions play a considerable role in the pathogenesis of dentoskeletal dysmorphisms. The treatment of dento-maxillofacial dysgnathia implies a functional rehabilitation to re-harmonize the stomatognathic system. This study aims to demonstrate the importance of a rehabilitation protocol of functional orofacial parameters at the end of a surgical-orthodontic treatment in order to achieve long-term success. MATERIALS AND METHODS: After orthognathic surgery, facial expression exercises and jaw exercises are prescribed to promote the recovery of neuromuscular function. At the end of treatment, a sample of 30 dysgnathic patients underwent a functional evaluation of the orofacial district to identify any lingual or articulatory dysfunctions. The information gathered led to an individual re-education program that consisted of an active myofunctional-logopedic approach integrated with appliances used as retention. RESULTS: 19 patients needed myofunctional therapy to re-educate deglutition and tongue posture. Articulatory disorders were found in 7 patients originally suffering from Class III and/or open-bite skeletal disharmony; 5 of these completed rehabilitation with speech therapy. After rehabilitation the functional parameters were completely normalized in 12 patients; in 5 cases, partial improvements were obtained, while in 2 cases the therapy was ineffective. CONCLUSIONS: In a patient undergoing post-surgical reconsolidation of his/her functional equilibrium even an uncontrolled speech defect may lead to an instable result. Only through an interdisciplinary approach it is possible to intercept and re-educate all the functions that are not compliant with the structural changes and to eliminate a tendency to relapse of the dysgnathia.

Tratamiento quirúrgico-ortodóncico de una maloclusión esquelética de clase III severa / Surgical-orthodontic treatment of severe class III skeletal malocclusion

Presentamos un caso de una paciente adulta con una maloclusión dental y esquelética de clase III severa de causa principalmente maxilar. Observamos también un mentón prominente que otorga a la paciente ciertos rasgos prognáticos sin tratarse de un prognatismo mandibular real. Seguiremos la secuencia descriptiva del caso completo: diagnóstico y plan de tratamiento, tratamiento ortodóncico prequirúrgico, cirugía ortognática y tratamiento ortodóncico posquirúrgico. Podremos evaluar la estabilidad posretención del caso 3 años después. Este caso fue presentado en la 50 Reunión de la Sociedad Española de Ortodoncia, y formaba parte de los requisitos necesarios para acceder a la condición de miembro diplomado (AU)

An adult with a severe dental and skeletal class III malocclusion (maxillary deficiency) is reported. Patient presented a procumbent chin and some prognathic features but did not show a «true» mandibular prognathism. Diagnosis and treatment planning, orthodontic presurgical and postsurgical treatment and orthognathic surgical procedure are discussed in detail. Postretention follow-up records are also reviewed after 3 years. This case was presented before the 50 Reunión de la Sociedad Española de Ortodoncia in partial fullfilment of the requirements needed to become a diplomate member of this society (AU)