Biodegradable and biocompatible subcutaneous implants consisted of pH-sensitive mebendazole-loaded/folic acid-targeted chitosan nanoparticles for murine triple-negative breast cancer treatment.

BACKGROUND: Mebendazole (MBZ) is a well-known anti-parasite drug with significant anti-cancer properties. However, MBZ exhibits low solubility, limited absorption efficacy, extensive first-pass effect, and low bioavailability. Therefore, multiple oral administration of high dose MBZ is required daily for achieving the therapeutic serum level which can cause severe side effects and patients' non-compliance. METHOD: In the present study, MBZ-loaded/folic acid-targeted chitosan nanoparticles (CS-FA-MBZ) were synthesized, characterized, and used to form cylindrical subcutaneous implants for 4T1 triple-negative breast tumor (TNBC) treatment in BALB/c mice. The therapeutic efficacy of the CS-FA-MBZ implants was investigated after subcutaneous implantation in comparison with Control, MBZ (40 mg/kg, oral administration, twice a week for 2 weeks), and CS-FA implants, according to 4T1 tumors' growth progression, metastasis, and tumor-bearing mice survival time. Also, their biocompatibility was evaluated by blood biochemical analyzes and histopathological investigation of vital organs. RESULTS: The CS-FA-MBZ implants were completely degraded 15 days after implantation and caused about 73.3%, 49.2%, 57.4% decrease in the mean tumors' volume in comparison with the Control (1050.5 ± 120.7 mm3), MBZ (552.4 ± 76.1 mm3), and CS-FA (658.3 ± 88.1 mm3) groups, respectively. Average liver metastatic colonies' number per microscope field at the CS-FA-MBZ group (2.3 ± 0.7) was significantly (P < 0.05) lower than the Control (9.6 ± 1.7), MBZ (5.0 ± 1.5), and CS-FA (5.2 ± 1) groups. In addition, the CS-FA-MBZ treated mice exhibited about 52.1%, 27.3%, and 17% more survival days after the cancer cells injection in comparison with the Control, MBZ, and CS-FA groups, respectively. Moreover, the CS-FA-MBZ implants were completely biocompatible based on histopathology and blood biochemical analyzes. CONCLUSION: Taking together, CS-FA-MBZ implants were completely biodegradable and biocompatible with high therapeutic efficacy in a murine TNBC model.

Flubendazole Plays an Important Anti-Tumor Role in Different Types of Cancers.

Flubendazole, belonging to benzimidazole, is a broad-spectrum insect repellent and has been repurposed as a promising anticancer drug. In recent years, many studies have shown that flubendazole plays an anti-tumor role in different types of cancers, including breast cancer, melanoma, prostate cancer, colorectal cancer, and lung cancer. Although the anti-tumor mechanism of flubendazole has been studied, it has not been fully understood. In this review, we summarized the recent studies regarding the anti-tumor effects of flubendazole in different types of cancers and analyzed the related mechanisms, in order to provide the theoretical reference for further studies in the future.

In silico molecular target prediction unveils mebendazole as a potent MAPK14 inhibitor.

The concept of polypharmacology involves the interaction of drug molecules with multiple molecular targets. It provides a unique opportunity for the repurposing of already-approved drugs to target key factors involved in human diseases. Herein, we used an in silico target prediction algorithm to investigate the mechanism of action of mebendazole, an antihelminthic drug, currently repurposed in the treatment of brain tumors. First, we confirmed that mebendazole decreased the viability of glioblastoma cells in vitro (IC50 values ranging from 288 nm to 2.1 µm). Our in silico approach unveiled 21 putative molecular targets for mebendazole, including 12 proteins significantly upregulated at the gene level in glioblastoma as compared to normal brain tissue (fold change > 1.5; P < 0.0001). Validation experiments were performed on three major kinases involved in cancer biology: ABL1, MAPK1/ERK2, and MAPK14/p38α. Mebendazole could inhibit the activity of these kinases in vitro in a dose-dependent manner, with a high potency against MAPK14 (IC50  = 104 ± 46 nm). Its direct binding to MAPK14 was further validated in vitro, and inhibition of MAPK14 kinase activity was confirmed in live glioblastoma cells. Consistent with biophysical data, molecular modeling suggested that mebendazole was able to bind to the catalytic site of MAPK14. Finally, gene silencing demonstrated that MAPK14 is involved in glioblastoma tumor spheroid growth and response to mebendazole treatment. This study thus highlighted the role of MAPK14 in the anticancer mechanism of action of mebendazole and provides further rationale for the pharmacological targeting of MAPK14 in brain tumors. It also opens new avenues for the development of novel MAPK14/p38α inhibitors to treat human diseases.

Continuous twin screw granulation: Impact of binder addition method and surfactants on granulation of a high-dosed, poorly soluble API.

Despite the recent commercialization of several drug products manufactured through continuous manufacturing techniques, knowledge on the formulation aspect of these techniques, such as twin screw wet granulation, is still rather limited. Previous research identified lactose/MCC/HPMC as a robust platform formulation for several model formulations, although granulation of the high-dosed, poorly soluble API mebendazole proved challenging. Therefore, current research evaluated the binder addition method (wet or dry) as well as surfactant (SLS) addition when using PVP, instead of HPMC. Compared to the previous formulation, using HPMC as binder, all four formulations with PVP yielded significantly stronger granules at similar to significantly lower liquid to solid (L/S) ratios. Through the combination of four replicate center composite circumscribed designs, each evaluating the impact of screw speed and L/S ratio on granule quality attributes, the effect of the formulation variables was assessed. Overall, L/S ratio had the most significant impact on granule characteristics whereas the effect of screw speed was negligible. Similar granule quality attributes were obtained for each formulation, although the addition of SLS and wet binder addition significantly reduced the required L/S ratio to achieve the desired characteristics. This significant reduction could prove useful for processing other formulations requiring high amounts of moisture, which could otherwise not be dried at a high throughput due to the limited drying capacity of the dryer unit of the Consigma system.

Continuous twin screw granulation: A complex interplay between formulation properties, process settings and screw design.

Due to the numerous advantages over batch manufacturing, continuous manufacturing techniques such as twin screw wet granulation are rapidly gaining importance in pharmaceutical production. Since a large knowledge gap on the importance of formulation variables exists, this study systematically assessed the impact of different screw configurations and process settings on eight model formulations, varying in filler type, active pharmaceutical ingredient (API) characteristics and drug load. Although liquid to solid (L/S) ratio was the most influential variable for all formulations, also a large effect of the kneading element thickness was observed. Narrow kneading elements with a length to diameter ratio (L/D) of 1/6 had a significant detrimental effect on granule size, flow and strength compared to 1/4 L/D elements. The effects of kneading element distribution and barrel fill level were less pronounced. At low drug load, both filler types could be used to obtain granules with acceptable critical quality attributes (CQAs) for both APIs. Granulation at high drug load of the poorly soluble, poorly wettable API mebendazole proved challenging as it could not be processed using lactose as filler, in contrast to lactose/MCC. As formulations containing lactose/MCC as filler were less influenced by different screw configurations, process settings and API characteristics than formulations without MCC, lactose/MCC/HPMC was considered a promising platform formulation.

In vitro efficacies of solubility-improved mebendazole derivatives against Echinococcus multilocularis.

Recently, we introduced an epoxy group to mebendazole by a reaction with epichlorohydrin and obtained two isoforms, mebendazole C1 (M-C1) and mebendazole C2 (M-C2). The in vitro effects of mebendazole derivatives at different concentrations on Echinococcus multilocularis protoscoleces and metacestodes as well as cytotoxicity in rat hepatoma (RH) cells were examined. The results demonstrated that the solubility of the two derivatives was greatly improved compared to mebendazole. The mortality of protoscoleces in vitro reached to 70-80% after 7 days of exposure to mebendazole or M-C2, and M-C2 showed higher parasiticidal effects than mebendazole (P > 0.05). The parasiticidal effect of M-C1 was low, even at a concentration of 30 µm. The percentage of damaged metacestodes that were treated with mebendazole and M-C2 in vitro at different concentrations were similar, and M-C1 exhibited insignificant effects on metacestodes. Significant morphological changes on protoscoleces and metacestodes were observed after treatment with mebendazole and M-C2. In addition, the introduction of an epoxy group to mebendazole also reduced its cytotoxicity in RH cells. Our results demonstrate that the introduction of an epoxy group not only improved the solubility of mebendazole, but also increased its parasiticidal effects on E. multilocularis and reduced its cytotoxicity in RH cells.

The efficacy of an alternative mebendazole formulation in mice infected with Echinococcus multilocularis.

This study was conducted to investigate the efficacy of a new formulation of MBZ oily suspension (MBZ-OS) in experimentally Echinococcus multilocularis-infected mice. MBZ-OS was prepared and administered to mice infected with E. multilocularis at 12.5 and 25 mg/kg for 14 consecutive days. Then, the cysts were collected, weighed and histologically examined. The results showed that the reduction rate of cyst weight induced by MBZ-OS at two doses was 95.23% and 92.67%, which was significantly higher than that of MBZ-1% tragacanth (positive control) at corresponding concentrations (87.41% and 69.47%), indicating that the treatment of alveolar echinococcosis at lower doses could be achieved by the use of MBZ-OS. This finding shows that MBZ-OS is also a promising formulation for alveolar echinococcosis as well as cystic echinococcosis and deserves to be investigated in clinical applications against echinococcosis.

Effect of flubendazole on developing stages of Loa loa in vitro and in vivo: a new approach for screening filaricidal agents.

BACKGROUND: Loiasis, an often-neglected tropical disease, is a threat to the success of lymphatic filariasis and onchocerciasis elimination programmes in rainforest areas of the central and western Africa. Its control and even its elimination might be possible through the use of a safe macrofilaricide, a prophylactic drug, or perhaps a vaccine. This present study evaluated the effect of flubendazole (FLBZ) on the development of Loa loa L3 in vitro and in vivo. METHODS: Infective stages of L. loa were isolated and co-cultured in Dulbecco's Modified Eagle's Medium in the presence of monkey kidney epithelial cells (LLC-MK2) feeder cells. FLBZ and its principal metabolites, reduced flubendazole (RFLBZ) and hydrolyzed flubendazole (HFLBZ), were screened in vitro at concentrations 0.05, 0.1, 0.5, 1 and 10 µg/ml. The viability of the parasites was assessed microscopically daily for 15 days. For in vivo study, a total of 48 CcR3 KO mice were infected subcutaneously with 200 L. loa L3 and treated with 10 mg/kg FLBZ once daily for 5 consecutive days. Twenty-four animals were used as control and received L3 and vehicle. They were dissected at 5, 10, 15 and 20 days post-treatment for worm recovery. RESULTS: The motility of L3 larvae in vitro was reduced from the second day of incubation with drugs at in vivo plasma concentration levels, with a strong correlation found between reduced motility and increased drug concentration (Spearman's rho = -0.9, P < 0.0001). Except for HFLBZ (0.05 µg/ml and 0.01 µg/ml), all concentrations of FLBZ, HFLBZ and RFLBZ interrupted the moulting of L. loa infective larvae to L4. In vivo, regardless of the experimental group, there was a decrease in parasite recovery with time. However, at each time point this reduction was more pronounced in the group of animals treated with FLBZ compared to equivalent control. Parasites were recovered from the flubendazole-treated groups only on day 5 post-inoculation at an average rate of 2.1%, a value significantly lower (Mann-Whitney U-test, U = 28, P = 0.0156) than the average of 31.1% recovered from the control group. CONCLUSIONS: This study reveals the ability of flubendazole to inhibit the development of L. loa L3 both in vitro and in vivo, and in addition validates the importance of in vitro and animal models of L. loa as tools for the development of drugs against loiasis.

Inclusion complexes of ß-cyclodextrin and polymorphs of mebendazole: Physicochemical characterization.

Mebendazole (MBZ), designated as a WHO essential drug, can exist in diverse solid forms and presents low absorption at the gastrointestinal level. Considering the potential of cyclodextrins to enhance the solubility and permeability of drugs, inclusion complexes of polymorphs A and C of MBZ with ß­cyclodextrin were obtained. The characterization of the complexes in solid state was performed by using a combination of experimental techniques including Fourier transform infrared spectroscopy, powder X-ray diffractometry and solid state nuclear magnetic resonance. Moreover, the effect of the binary complexes on their physical stability was evaluated. In addition, for a complete characterization of polymorphs A and C, one dimensional spectra and correlation nuclear magnetic resonance experiments were employed. Our physical studies showed that the inclusion complexes were new crystalline forms that induced shifts and broadening in the infrared and nuclear spectra. A molecular modelling analysis performed on the inclusion modes, demonstrated that the most favourable structure for the complex was the head down orientation. Moreover, the intermolecular interactions calculated for the complex with the atoms in molecules theory are in good agreement with the spectroscopic results. The inclusion complexes exhibited an increment of solubility in simulated physiological media. Furthermore, it was demonstrated that the complex formation did not affect the physical stability of the polymorphs.

Evaluation of chemometric approaches for polymorphs quantification in tablets using near-infrared hyperspectral images.

Near-Infrared hyperspectral imaging (HSI-NIR) is a useful technique for pharmaceutical research and industry alike. It can provide important surface information such as the polymorphs quantification and its distribution over the tablet. Several chemometric tools are applied for this purpose, with MCR-ALS and PLS regression being the most common approaches. In this work, a detailed comparison between these two approaches is performed. Beyond a "simple" regression comparison, a comparison of the score images (local quantification) was also evaluated. The system under study is tablets with ternary mixtures of Mebendazol (MBZ) polymorphs, microcrystalline cellulose and magnesium stearate. PLS models, in general, gave lower RMSEP (below 1.7% w/w for the three MBZ polymorphs) than the corresponding MCR-ALS predictions. Analyzing the distributions of the scores in the images of each sample shows clear differences between the PLS and MCR-ALS models. The MCR-ALS gave more chemical meaningful distribution maps for all polymorphs, even though the PLS accurately predicts the average concentration across the image. The problem is that the PLS models used the main spectral regions to quantify each MBZ polymorph, but at the same time undermines the minor spectroscopic changes caused by the different polymorphs. Although this may seem as a minor deviation from the truth, the results clearly show that this deviation is detrimental for the analysis of the spatial distribution of the analytes. These results indicate that the optimal multivariate model for multivariate images depend on the goal of the analysis: global quantification or a distribution analysis.

Dipeptides as co-formers in co-amorphous systems.

Drug-amino acid co-amorphous systems have become increasingly well-investigated systems to improve dissolution rate of poorly water-soluble drugs. In this study, dipeptides were investigated as co-formers for co-amorphous systems based on the hypothesis that dipeptides might combine the inherent properties of the two included amino acids. Co-amorphization of the model drug mebendazole was investigated with five dipeptides, tryptophan-phenylalanine, phenylalanine-tryptophan, aspartic acid-tyrosine, histidine-glycine and proline-tryptophan. The dipeptides were chosen to investigate whether the side chains (nonpolar, polar, basic and acidic), and the sequence of amino acids (tryptophan-phenylalanine versus phenylalanine-tryptophan) have an influence on the performance of dipeptides as co-formers. All mebendazole-dipeptide systems became amorphous after ball milling for only 30 min, while this generally was not the case for the single amino acids or physical mixtures of the amino acids forming the dipeptides. Dissolution studies showed that the dissolution rate of mebendazole from most co-amorphous systems was increased significantly compared to crystalline and amorphous mebendazole. However, no clear trend for the drug dissolution enhancement was observed within the different co-amorphous drug-dipeptide systems. The stability study revealed that co-amorphous mebendazole-dipeptide systems showed higher physical stability compared to amorphous mebendazole. In conclusion, dipeptides are shown to be promising co-formers for co-amorphous systems.

Aspartame as a co-former in co-amorphous systems.

Co-amorphous drug delivery systems are a promising approach to improve the dissolution rate and therefore potentially the oral bioavailability of poorly-water soluble drugs. Several low molecular weight excipients, for instance amino acids, have previously been shown to stabilize the amorphous form and increase the dissolution rate of drugs. In this study, the feasibility of aspartame, a methyl ester of the aspartic acid-phenylalanine dipeptide, as a co-former was investigated and compared with the respective single amino acids, both alone and in combination. The poorly water-soluble compounds mebendazole, tadalafil and piroxicam were chosen as model drugs. In contrast to the single amino acids or the physical mixture of both, all drug-aspartame mixtures became amorphous upon 90 min of ball milling. Only a single glass transition temperature (Tg) was detected by modulated differential scanning calorimetry, which indicates that a homogeneous single-phase co-amorphous system was obtained. Powder dissolution tests showed that the dissolution rates of the drugs from drug-aspartame co-amorphous samples were increased compared to crystalline drugs. Furthermore, supersaturation was observed for the mebendazole-aspartame and tadalafil-aspartame co-amorphous systems. In conclusion, aspartame has been shown to be a promising co-former in co-amorphous systems, superior to the single amino acids or their mixtures.

Comparison of macro and micro Raman measurement for reliable quantitative analysis of pharmaceutical polymorphs.

This work reports on the use of micro- and macro-Raman measurements for quantification of mebendazole (MBZ) polymorphs A, B, and C in mixtures. Three Raman spectrophotometers were studied with a laser spot size of 3, 80 and 100 µm and spectral resolutions of 3.9, 9 and 4 cm-1, respectively. The samples studied were ternary mixtures varying the MBZ polymorphs A and C from 0 to 100% and polymorph B from 0 to 30%. Partial Least Squares (PLS) regression models were developed using the pre-processing spectra (2nd derivative) of the ternary mixtures. The best performance was obtained when the macro-Raman configuration was applied, obtaining RMSEP values of 1.68%, 1.24% and 2.03% w/w for polymorphs A, B, and C, respectively. In general, micro-Raman presented worst results for MBZ polymorphs prediction because the spectra obtained with this configuration does not represent the bulk proportion of mixtures, which have different particle morphologies and sizes. In addition, the influence of these particle features on micro-Raman measurements was also studied. Finally, the results demonstrated that reliable analytical quantifying of MBZ polymorphs can be reached using a laser with wider area illuminated, thus enabling acquisition of more reproductive and representative spectra of the mixtures.

The use of molecular descriptors in the development of co-amorphous formulations.

Co-amorphous systems consisting of a drug and an amino acid have been investigated extensively for the enhancement of drug solubility and amorphous stability. The purpose of this study is to investigate which molecular descriptors are important for predicting the likelihood of a successful co-amorphisation between amino acid and drug. The predictions are thought to be used in an early screening phase to identify potential drug-amino acid combinations for further studies. A large variety of molecular descriptors was calculated for six drugs (carvedilol, mebendazole, carbamazepine, furosemide, indomethacin and simvastatin) and the twenty naturally occurring amino acids. The descriptor differences for all drug-amino acid combinations were calculated and used as input in the X-matrix of a Partial Least Square Discriminant Analysis (PLS-DA). The Y-matrix of the PLS-DA consisted of the X-ray powder diffraction response ("co-amorphous" or "not co-amorphous") obtained by ball milling all combinations for 60 min. The PLS-DA model showed a clear separation of the not co-amorphous and the co-amorphous samples and was successfully predicting the class membership of 19 out of the 20 completely left out drug-amino acid combinations of mebendazole. The approach seems to be promising for predicting the ability of new drug-amino acids combinations to become co-amorphous.

The Effect of Flubendazole on Adhesion and Migration in SW480 and SW620 Colon Cancer Cells.

BACKGROUND: Colon cancer is the most common type of gastrointestinal cancer. Despite advances during the last two decades, the efficacy of colorectal cancer treatment is still insufficient and new anticancer agents are necessary. METHODS: In our study, colon cancer cells derived from a primary tumor (SW480) and lymph node metastasis (SW620) from the same patient were used and compared. The effect of flubendazole (FLU) on cell adhesion and migration was monitored using the x-CELLigence Real-Time Cell Analysis system. Expressions of molecules involved in adhesion and migration were analyzed using RT-PCR and western blot. Furthermore, RNA silencing of nuclear factor-κB in SW620 cells was used to determine the involvement of the NF-κB p65 regulation pathway in FLU action. RESULTS: FLU significantly suppressed the adhesion of SW480 cells and reduced the expression of adhesion markers (ICAM-1, αE-catenin; ß-catenin; integrin α5 and ß1). Moreover, a significant anti-migratory potential of FLU was manifested in the SW620 cells. In addition, FLU suppressed the phosphorylation of NF-κB p65 and potentiated the suppression of several metastatic markers (ICAM-1, EpCAM, integrin α5, ß1, α-tubulin) caused by NF-κB p65 silencing. CONCLUSION: FLU has a significant anti-migratory effect in intestinal cancer cell SW480 and its lymph node metastatic cells SW620. FLU decreases the expression of some proteins involved in metastatic processes and inhibits activation of NF-κB p65.

Targeted Drug Delivery and Treatment of Endoparasites with Biocompatible Particles of pH-Responsive Structure.

Biomaterials conceived for vectorization of bioactives are currently considered for biomedical, biological, and environmental applications. We have produced a pH-sensitive biomaterial composed of natural source alginate and chitosan polysaccharides for application as a drug delivery system via oral administration. The composite particle preparation was in situ monitored by means of isothermal titration calorimetry. The strong interaction established between the macromolecules during particle assembly led to 0.60 alginate/chitosan effective binding sites with an intense exothermic effect and negative enthalpy variation on the order of a thousand kcal/mol. In the presence of model drugs mebendazole and ivermectin, with relatively small and large structures, respectively, mebendazole reduced the amount of chitosan monomers available to interact with alginate by 27%, which was not observed for ivermectin. Nevertheless, a state of intense negative Gibbs energy and large entropic decrease was achieved, providing evidence that formation of particles is thermodynamically driven and favored. Small-angle X-ray scattering provided further evidence of similar surface aspects independent of the presence of drug. The physical responses of the particles to pH variation comprise partial hydration, swelling, and the predominance of positive surface charge in strong acid medium, whereas ionization followed by deprotonation leads to compaction and charge reversal rather than new swelling in mild and slightly acidic mediums, respectively. In vivo performance was evaluated in the treatment of endoparasites in Corydoras fish. Systematically with a daily base oral administration, particles significantly reduced the infections over 15 days of treatment. The experiments provide evidence that utilizing particles granted and boosted the action of the antiparasitic drugs, leading to substantial reduction or elimination of infection. Hence, the pH-responsive particles represent a biomaterial with prominent characteristics that is promising for the development of targeted oral drug delivery.

Oral bioavailability enhancement of flubendazole by developing nanofibrous solid dosage forms.

The bioavailability of the anthelminthic flubendazole was remarkably enhanced in comparison with the pure crystalline drug by developing completely amorphous electrospun nanofibres with a matrix consisting of hydroxypropyl-ß-cyclodextrin and polyvinylpyrrolidone. The thus produced formulations can potentially be active against macrofilariae parasites causing tropical diseases, for example, river blindness and elephantiasis, which affect altogether more than a hundred million people worldwide. The bioavailability enhancement was based on the considerably improved dissolution. The release of a dose of 40 mg could be achieved within 15 min. Accordingly, administration of the nanofibrous system ensured an increased plasma concentration profile in rats in contrast to the practically non-absorbable crystalline flubendazole. Furthermore, easy-to-grind fibers could be developed, which enabled compression of easily administrable immediate release tablets.

Portable near-infrared instruments: Application for quality control of polymorphs in pharmaceutical raw materials and calibration transfer.

This work presents an evaluation of the analytical performance of three different portable near-infrared (NIR) instruments (denominated Port.1, Port.2 and Port.3) for quantifying mebendazole polymorphs (A, B and C) in pharmaceutical raw materials using multivariate calibration models. The performance of the portable instruments was compared with a benchtop one (FT-NIR Frontier spectrometer). In addition, calibration transfer between the benchtop and one of the portable instruments was also performed. For polymorph A, the Port.1 presented the lowest RMSEP value (1.01% w/w) even when compared to the FT-NIR instrument. For polymorphs B and C, the same Port.1 instrument presented RMSEP values of 2.09% w/w and 2.41% w/w, respectively, which were statistically similar to those obtained with the benchtop instrument. The LOD ranges (3.9-5.5 for polymorph A, 3.6-5.1 for polymorph B and 5.7-7.7 for polymorph C) obtained with the Port.1 was higher than those achieved with the benchtop NIR instrument, with high spectral resolution, signal-to-noise ratio and better wavelength reproducibility. Calibration transfer was performed between the benchtop NIR and Port.1 instruments. According to the results, the transferability of models is possible. The results obtained for complete recalibration of the portable instrument and those for the benchtop are comparable. The methods developed demonstrated a flexible, easy, cheap and fast way for quality control of MBZ polymorphs in incoming material, mainly in pharmaceutical laboratory chains.

Comprehensive Modeling and Discovery of Mebendazole as a Novel TRAF2- and NCK-interacting Kinase Inhibitor.

TRAF2- and NCK-interacting kinase (TNIK) represents one of the crucial targets for Wnt-activated colorectal cancer. In this study, we curated two datasets and conducted a comprehensive modeling study to explore novel TNIK inhibitors with desirable biopharmaceutical properties. With Dataset I, we derived Comparative Molecular Similarity Indices Analysis (CoMSIA) and variable-selection k-nearest neighbor models, from which 3D-molecular fields and 2D-descriptors critical for the TNIK inhibitor activity were revealed. Based on Dataset II, predictive CoMSIA-SIMCA (Soft Independent Modelling by Class Analogy) models were obtained and employed to screen 1,448 FDA-approved small molecule drugs. Upon experimental evaluations, we discovered that mebendazole, an approved anthelmintic drug, could selectively inhibit TNIK kinase activity with a dissociation constant Kd = ~1 µM. The subsequent CoMSIA and kNN analyses indicated that mebendazole bears the favorable molecular features that are needed to bind and inhibit TNIK.

Phenolic Metabolites of Dalea ornata Affect Both Survival and Motility of the Human Pathogenic Hookworm Ancylostoma ceylanicum.

Hookworms are ubiquitous human parasites, infecting nearly one billion people worldwide, and are the leading cause of anemia and malnutrition in resource-limited countries. Current drug treatments rely on the benzimidazole derivatives albendazole and mebendazole, but there is emerging resistance to these drugs. As part of a larger screening effort, using a hamster-based ex vivo assay, anthelmintic activity toward Ancylostoma ceylanicum was observed in the crude extract of aerial parts of Dalea ornata. These studies have led to the isolation and characterization of phenolic metabolites 1-10. The structures were determined by 1D and 2D NMR spectroscopy, and the absolute configuration of 1 was assigned using electronic circular dichroism data. The new compound, (2S)-8-(3-methylbut-2-en-1-yl)-6,7,4'-trihydroxyflavanone (1), was weakly active at 7.3 µM, with 17% reduction in survival of the hookworms after 5 days. The rotenoids deguelin (9) and tephrosin (10), predictably perhaps, were the most active, with complete worm mortality observed by day 4 (or earlier) at 6.3 and 6.0 µM, respectively. The effects of 1-10 on hookworm motility and on toxicity to hamster splenocytes were also explored as important measures of treatment potential.