Biomass Sorghum: Effect of Acid, Basic and Alkaline Peroxide Pretreatments on the Enzymatic Hydrolysis and Ethanol Production

Abstract This study evaluated the effects of three chemical pretreatments of biomass sorghum (BS): dilute alkaline (PTA1 and PTA2), dilute acid (PTB1 and PTB2) and alkaline hydrogen peroxide (PTC1 and PTC2) in the enzymatic hydrolysis and ethanol production. Among the six investigated conditions, the pretreatment with 7.36% H2O2 (PTC2) was the most efficient in the lignin removal and preservation of the polysaccharide fraction. After the enzymatic hydrolysis, increases in the glucose and xylose concentrations were observed in the pretreated BS hydrolysates, mainly in PTB1 and PTC1. All the hydrolysates obtained low concentrations of inhibitors. In the alcoholic fermentations with Pichia stiptis, the greatest ethanol yield was obtained in PTB1 hydrolysate (3.84 g L-1), corresponding to 16.15% of yield. The highest ethanol yield in PTB1 hydrolysate can be justified by the maximum concentration of xylose obtained in this hydrolysate, demonstrating the potential of P. stiptis in the fermentation of pentose to ethanol. The results indicated that biomass sorghum is an alternative lignocellulose source with potential for the production of second generation ethanol, opening up prospects for additional studies.

Could biological tissue preservation methods change chemical elements proportion measured by energy dispersive X-ray spectroscopy?

Energy dispersive X-ray spectroscopy (EDS) is a powerful technical tool used in the biomedical field to investigate the proportion of chemical elements of interest in research, such as heavy metal bioaccumulation and the enzymatic cofactors and nanoparticle therapy in various pathologies. However, the correct evaluation of the proportion of the elements is subject to some factors, including the method of sample preservation. In this study, we seek to investigate the effect of biological tissue preservation methods on the proportion of chemical elements obtained by the EDS methodology. For such, we used EDS to measure the proportion of chemical elements with biomedical interest in preserved livers, using three common methods for preserving biological tissues: (a) freezing, (b) paraformaldehyde fixative solution, and (c) Karnovsky solution. We found an increased level of sodium and reduced contents of potassium and copper in samples fixed in fixative solutions, when compared to frozen samples (p < 0.05). Our data indicate that preservation methods can change the proportion of chemical elements in biological samples, when measured by EDS. Frozen preservation should be preferred to retain the actual chemical content of samples and allow a correct assessment of the proportion of their elements.

Determination of inorganic cations in biological fluids using a hybrid capillary electrophoresis device coupled with contactless conductivity detection.

We describe the assembly of a hybrid electrophoresis device that contains fused silica capillaries interconnected to a microfabricated interface in a cross format for the determination of inorganic cations in biological samples. The sample transport in the proposed hybrid device was performed under gated injection mode and the separations were monitored with a capacitively coupled contactless conductivity detector. The capillary extremities were inserted into polypropylene tubes to create solution reservoirs. Sensing electrodes were produced using stainless-steel hypodermic needles previously cut with 2.0 mm length. The running composition and injection time were optimized and the best results were found using 50 mmol/L lactic acid, 20 mmol/L histidine and 3 mmol/L 18-crown-6 ether, and an electrokinetic injection time of 15 s. The separation of six inorganic cations was achieved with baseline resolution, and efficiencies were between 9.1 × 103 and 5.4 × 104 plates/m. The proposed hybrid device was explored for determining the concentration levels of inorganic cations in urine, saliva, and tear samples, employing Li+ as an internal standard. The achieved results were in good agreement with the data reported in the literature. The reliability of the proposed method ranged from 93 to 98%, thus suggesting satisfactory accuracy for bioanalytical applications.

Caracterização da superfície da liga experimental ti25ta25nb3sn após tratamento alcalino: estudos in vitro / Characterization of the surface of the experimental alloy Ti25Ta25Nb3Sn after alkaline treatment: in vitro studies

Titânio e suas ligas são considerados materiais bioinertes e dessa forma técnicas de modificação de superfície podem ser empregadas para uma melhor interação osso/biomaterial. Assim, o presente estudo teve por objetivo avaliar a modificação da superfície da liga experimental Ti25Ta25Nb3Sn a partir do emprego do tratamento alcalino, com vistas à obtenção de uma superfície bioativa. Os lingotes das ligas foram obtidos em forno a arco voltaico e posteriormente foram submetidos a tratamento térmico e forjamento a frio, de tal forma que discos com 10 mm de diâmetro e 3mm de espessura fossem obtidos. Para o tratamento alcalino as amostras foram imersas em solução de NaOH na concentração de 0,5, 1,0 e 1,5M. A morfologia das superfícies das amostras foi avaliada por meio do microscópio eletrônico de varredura e a composição avaliada por espectroscopia de energia dispersiva (EDS). As fases presentes após tratamento foram avaliadas por técnicas de difração de raios-X e a molhabilidade das superfícies a partir do ângulo de contato. Estudos in vitro foram realizados para avaliar a adesão bacteriana e proliferação celular. Os resultados evidenciam a produção de uma estrutura porosa na superfície da liga quando ela foi submetida ao tratamento com NaOH em todas as molaridades usadas. A molhabilidade da superfície apresentou caraterística hidrofílica, o difratograma revelou picos mais intensos após o tratamento alcalino. Verificou também maior quantidade de bactérias nas superfícies porosas resultante do tratamento alcalino e maior adesão celular com viabilidade sem variação entre os tratamentos. Conclui-se que o tratamento com NaOH 1,0M proporciona uma superfície bioativa(AU)

Titanium and its alloys are considered bioinert materials and thus surface modification techniques can be employed for better bone / biomaterial interaction. Thus, the present study aimed to evaluate the surface modification of the experimental alloy Ti25Ta25Nb3Sn to obtain a bioactive surface, from the use of alkaline treatment. The ingots of the alloys were obtained in an arc furnace and afterwards they were subjected to thermal treatment and cold forging, in such a way that disks with 10 mm of diameter and 3 mm of thickness were obtained. For the alkaline treatment the samples were immersed in NaOH solution at the concentration of 0.5, 1.0 and 1.5M. The morphology of the surfaces of the samples was evaluated by scanning electron microscopy and the composition evaluated by dispersive energy spectroscopy (EDS). The phases present after treatment were evaluated by X-ray diffraction techniques and the wettability of the surfaces from the contact angle. In vitro studies were performed to evaluate bacterial adhesion and cell proliferation. The results evidenced the production of a porous structure on the alloy surface when it was subjected to NaOH treatment in all the molarities used. The wettability of the surface presented a hydrophilic character, the diffractogram showed more intense peaks after the alkaline treatment. It also verified a greater amount of bacteria in the porous surfaces resulting from the alkaline treatment and greater cell adhesion with viability without variation between the treatments. It is concluded that the treatment with 1.0M NaOH provides a bioactive surface(AU)

Anesthesia of Epinephelus marginatus with essential oil of Aloysia polystachya: an approach on blood parameters.

This study investigated the anesthetic potential of the essential oil (EO) of Aloysia polystachya in juveniles of dusky grouper (Epinephelus marginatus). Fish were exposed to different concentrations of EO of A. polystachya to evaluate time of induction and recovery from anesthesia. In the second experiment, fish were divided into four groups: control, ethanol and 50 or 300 µL L-1 EO of A. polystachya, and each group was submitted to induction for 3.5 min and recovery for 5 or 10 min. The blood gases and glucose levels showed alterations as a function of the recovery times, but Na+ and K+ levels did not show any alteration. In conclusion, the EO from leaves of A. polystachya is an effective anesthetic for dusky grouper, because anesthesia was reached within the recommended time at EO concentrations of 300 and 400 µL L-1. However, most evaluated blood parameters showed compensatory responses due to EO exposure.

Anesthesia of Epinephelus marginatus with essential oil of Aloysia polystachya: an approach on blood parameters

ABSTRACT This study investigated the anesthetic potential of the essential oil (EO) of Aloysia polystachya in juveniles of dusky grouper (Epinephelus marginatus). Fish were exposed to different concentrations of EO of A. polystachya to evaluate time of induction and recovery from anesthesia. In the second experiment, fish were divided into four groups: control, ethanol and 50 or 300 µL L−1 EO of A. polystachya, and each group was submitted to induction for 3.5 min and recovery for 5 or 10 min. The blood gases and glucose levels showed alterations as a function of the recovery times, but Na+ and K+ levels did not show any alteration. In conclusion, the EO from leaves of A. polystachya is an effective anesthetic for dusky grouper, because anesthesia was reached within the recommended time at EO concentrations of 300 and 400 µL L−1. However, most evaluated blood parameters showed compensatory responses due to EO exposure.

Changes in soil physical and chemical properties in long term improved natural and traditional agroforestry management systems of cacao genotypes in Peruvian Amazon.

Growing cacao (Theobroma cacao L.) in an agroforestry system generates a productive use of the land, preserves the best conditions for physical, chemical and biological properties of tropical soils, and plays an important role in improving cacao production and fertility of degraded tropical soils. The aim of this study was to evaluate the impact of two long term agroforestry systems of cacao management on soil physical and chemical properties in an area originally inhabited by 30 years old native secondary forest (SF). The two agroforestry systems adapted were: improved natural agroforestry system (INAS) where trees without economic value were selectively removed to provide 50% shade and improved traditional agroforestry system (ITAS) where all native trees were cut and burnt in the location. For evaluation of the changes of soil physical and chemical properties with time due to the imposed cacao management systems, plots of 10 cacao genotypes (ICS95, UF613, CCN51, ICT1112, ICT1026, ICT2162, ICT2171, ICT2142, H35, U30) and one plot with a spontaneous hybrid were selected. Soil samples were taken at 0-20, 20-40 and 40-60 cm depths before the installation of the management systems (2004), and then followed at two years intervals. Bulk density, porosity, field capacity and wilting point varied significantly during the years of assessment in the different soil depths and under the systems assessed. Soil pH, CEC, exchangeable Mg and sum of the bases were higher in the INAS than the ITAS. In both systems, SOM, Ext. P, K and Fe, exch. K, Mg and Al+H decreased with years of cultivation; these changes were more evident in the 0-20 cm soil depth. Overall improvement of SOM and soil nutrient status was much higher in the ITAS than INAS. The levels of physical and chemical properties of soil under cacao genotypes showed a marked difference in both systems.

Metalless electrodes for capacitively coupled contactless conductivity detection on electrophoresis microchips.

This paper describes the use of ionic solutions as sensing electrodes for capacitively coupled contactless conductivity detection on electrophoresis microchips. Initially, two channels were engraved in a PMMA holder by using a CO2 laser system and sealed with a thin adhesive membrane. PDMS electrophoresis chips were fabricated by soft lithography and reversibly sealed against the polymer membrane. Different ionic solutions were investigated as metalless electrodes. The electrode channels were filled with KCl solutions prepared in conductivity values from approximately 10 to 40 S/m. The best analytical response was achieved using the KCl solution with 21.9 S/m conductivity (2 mol/L). Besides KCl, we also tested NaCl and LiCl solutions for actuating as detection electrodes. Taking into account the same electrolyte concentration (2 mol/L), the best response was recorded with KCl solution due to its higher ionic conductivity. The optimum operating frequency (400 kHz) and the best sensing electrode (2 mol/L KCl) were used to monitor electrophoretic separations of a mixture containing K(+) , Na(+) , and Li(+) . The use of liquid solutions as sensing electrodes for capacitively coupled contactless conductivity detection measurements has revealed great performance to monitor separations on chip-based devices, avoiding complicated fabrication schemes to include metal deposition and encapsulation of electrodes. The LOD values were estimated to be 28, 40, and 58 µmol/L for K(+) , Na(+) , and Li(+) , respectively, what is comparable to that of conventional metal electrodes. When compared to the use metal electrodes, the proposed approach offers advantages regarding the easiness of fabrication, simplicity, and lower cost per device.

Coordination, microprotonation equilibria and conformational changes of myo-inositol hexakisphosphate with pertinence to its biological function.

Within all the eukaryotic cells there is an important group of biomolecules that has been potentially related to signalling functions: the myo-inositol phosphates (InsPs). In nature, the most abundant member of this family is the so called InsP6 (phytate, L(12-)), for which our group has strived in the past to elucidate its intricate chemical behaviour. In this work we expand on our earlier findings, shedding light on the inframolecular details of its protonation and complexation processes. We evaluate systematically the chemical performance of InsP6 in the presence and absence of alkali and alkaline earth metal ions, through (31)P NMR measurements, in a non-interacting medium and over a wide pH range. The analysis of the titration curves by means of a model based on the cluster expansion method allows us to describe in detail the distribution of the different protonated microspecies of the ligand. With the aid of molecular modelling tools, we assess the energetic and geometrical characteristics of the protonation sequence and the conformational transition suffered by InsP6 as the pH changes. By completely characterizing the protonation pattern, conformation and geometry of the metal complexes, we unveil the chemical and structural basis behind the influence that the physiologically relevant cations, Na(+), K(+), Mg(2+) and Ca(2+) have over the phytate chemical reactivity. This information is essential in the process of gaining reliable structural knowledge about the most important InsP6 species in the in vitro and in vivo experiments, and how these features modulate their probable biological functions.

Valor nutritivo do feno de folíolos de pindoba de babaçu submetido a tratamentos alcalinos / Nutritive value of leaflets pindoba babassu hay subjected to alkaline treatments

Avaliou-se o efeito de tratamentos alcalinos por amonização com ureia a 2, 4 e 6% e por NaOH ou Ca(OH)2 a 1, 2 e 3% sobre o valor nutritivo do feno de folíolos de pindoba de babaçu quanto à composição e degradabilidade ruminal in situ nos tempos 6, 24 e 72h. Houve redução (P 0,05) nos teores de fibra em detergente neutro e em detergente ácido corrigidas para cinza e proteína (FDNcp e FDAcp) e nas frações hemicelulose e lignina quando dos tratamentos alcalinos, verificando-se ainda aumento (P 0,05) nos teores de proteína bruta (PB) e redução no N insolúvel quando da amonização. A degradação potencial (DP) da matéria seca (MS) e FDN do feno mostrou-se baixa, embora a amonização com 4% de ureia tenha elevado a degradação potencial e efetiva da PB, o que se atribui à intensa lignificação da parede celular, com limitação à utilização como volumoso em dietas para ruminantes. A amonização e o tratamento com 3% de Ca(OH)2 melhoram a degradação da MS e FDN, com destaque para a amonização com 4% de ureia, no entanto, os valores obtidos, 35,9 e 27,04%, respectivamente, são considerados baixos.(AU)

It was evaluated the effect of alkaline treatments by ammoniation with urea at 2, 4 and 6% NaOH or Ca(OH)2 and at 1, 2 and 3% on the nutritional value of the hay leaflets pindoba babassu chemical composition and degradability in situ at times 6, 24 and 72 hours. There was a reduction (P 0.05) in the contents of fiber (NDFap and ADFap) and in the hemicellulose and lignin fractions when alkaline treatments, verifying also increased (P 0.05) in contents of crude protein (CP) and reduction in insoluble N when ammoniation. The degradation potential (DP) of DM and NDF of hay in general were low, although the ammoniation with 4% urea (35.9%) has high potential degradation and effective of CP, which is attributed to intense lignification of the cell wall, with limitation to the use with forage for ruminants. The alkaline treatments contributed to the improvement the chemical composition of leaflets pindobababassu hay, by reducing the content of hemicellulose, lignin and insoluble nitrogen and increase CP. The ammoniation and treatment with 3% Ca(OH)2 improves the potential degradation of DM and NDF of hay leaflets pindobababassu, highlighting the level of 4% urea, based on MS, although the values obtained with this treatment, 35.9 and 27.0%, are considered low.(AU)

Mineral composition of cane sugar "in natura" hydrolyzed with quicklime (CaO) / Composição mineral da cana-de-açúcar "in natura" hidrolisada com cal virgem (CaO)

The aim of this study was to evaluate the mineral composition of in natura sugarcane hydrolyzed with increasing doses of quicklime and different periods of exposure to air. The levels of quicklime (CaO) used were 0.0 (control); 0.5; 1.0; 1.5 to 2.0% based on natural matter of cane and the time of exposure to air at 0; 24; 48; 72 and 96 hours. The mineral composition was assessed through the concentrations of calcium (Ca), phosphorus (P), potassium (K), magnesium (Mg), zinc (Zn), copper (Cu), manganese (Mn), chromium (Cr), lead (Pb) and cadmium (Cd). We used a completely randomized design. Data were analyzed using analysis of variance with repeated measures for comparison of means by Tukey test at 5% probability was used.

Objetivou-se avaliar a composição mineral da cana-de-açúcar in natura hidrolisada com doses crescentes de cal virgem e diferentes tempos de exposição ao ar. As doses de cal virgem (CaO) utilizadas foram 0,0 (controle); 0,5; 1,0; 1,5 e 2,0% com base na matéria natural da cana e os tempos de exposição ao ar 0; 24; 48; 72 e 96 horas. A composição mineral foi avaliada através das concentrações cálcio (Ca), fósforo (P), potássio (K), magnésio (Mg); zinco (Zn), cobre (Cu), manganês (Mn), cromo (Cr), chumbo (Pb) e cádmio (Cd). Utilizou-se o delineamento inteiramente casualizado. Os dados foram analisados utilizando uma análise de variância com medidas repetidas, para a comparação das médias foi utilizado o teste de Tukey ao nível de 5% de probabilidade.

Mineral composition of cane sugar "in natura" hydrolyzed with quicklime (CaO) / Composição mineral da cana-de-açúcar "in natura" hidrolisada com cal virgem (CaO)

The aim of this study was to evaluate the mineral composition of in natura sugarcane hydrolyzed with increasing doses of quicklime and different periods of exposure to air. The levels of quicklime (CaO) used were 0.0 (control); 0.5; 1.0; 1.5 to 2.0% based on natural matter of cane and the time of exposure to air at 0; 24; 48; 72 and 96 hours. The mineral composition was assessed through the concentrations of calcium (Ca), phosphorus (P), potassium (K), magnesium (Mg), zinc (Zn), copper (Cu), manganese (Mn), chromium (Cr), lead (Pb) and cadmium (Cd). We used a completely randomized design. Data were analyzed using analysis of variance with repeated measures for comparison of means by Tukey test at 5% probability was used.(AU)

Objetivou-se avaliar a composição mineral da cana-de-açúcar in natura hidrolisada com doses crescentes de cal virgem e diferentes tempos de exposição ao ar. As doses de cal virgem (CaO) utilizadas foram 0,0 (controle); 0,5; 1,0; 1,5 e 2,0% com base na matéria natural da cana e os tempos de exposição ao ar 0; 24; 48; 72 e 96 horas. A composição mineral foi avaliada através das concentrações cálcio (Ca), fósforo (P), potássio (K), magnésio (Mg); zinco (Zn), cobre (Cu), manganês (Mn), cromo (Cr), chumbo (Pb) e cádmio (Cd). Utilizou-se o delineamento inteiramente casualizado. Os dados foram analisados utilizando uma análise de variância com medidas repetidas, para a comparação das médias foi utilizado o teste de Tukey ao nível de 5% de probabilidade.(AU)

Preparation and characterization of an acellular bovine pericardium intended for manufacture of valve bioprostheses.

Major problems with biological heart valves post-implantation are associated with progressive structural deterioration and calcification attributed to glutaraldehyde processing, dead cells, and cell fragments present in the native tissue. In spite of these problems, glutaraldehyde still is the reagent of choice. The results with acellular matrix xenograft usually prepared by detergent treatment in association with enzymes are rather conflicting because while preserving mechanical properties, tissue morphology and collagen structure are process dependent. This work describes a chemical approach for the preparation of an acellular bovine pericardium matrix intended for the manufacture of heart valve bioprostheses. Cell removal was performed by an alkaline extraction in the presence of calcium salts for periods ranging from 6 to 48 h. The results showed that cell removal was achieved after 12 h, with swelling and negative charge increasing with processing time. Nevertheless, collagen fibril structure, ability to form fibrils, and stability to collagenase were progressive after 24-h processing. There was no denaturation of the collagen matrix. A process is described for the preparation of acellular bovine pericardium matrices with preserved fibril structure and morphology for the manufacture of cardiac valve bioprostheses and may be used in other applications for tissue reconstruction.

Role of vitamins and minerals in prevention and management of type 2 diabetes mellitus.

Vitamins and minerals play an important role in glucose metabolism, so understanding the impact of vitamin and mineral deficiencies and the potential utility of supplementation is relevant to the prevention and/or management of type 2 diabetes mellitus (DM). This review investigates current evidence for relationships between selected nutrients - vitamin B complex, antioxidants (vitamin A, C, E and carotenoids), calcium, vitamin D, vitamin K, magnesium, sodium, and potassium - and glucose metabolism. The investigation reveals current evidence is not strong enough for supplementation with minerals and vitamins to be recommended on a large scale for the prevention or management of DM. In order to prevent deficiencies and maintain health, the majority of diabetic individuals should receive daily vitamins and minerals within the ranges of recommended values from consumption of natural food sources and/or fortified foods. Further studies including large samples and longer follow-up periods are necessary to ascertain the benefits of mineral and vitamin supplementation to subsets of individuals who are at increased risk for DM or its complications.

Role of cations as components of jelly coats in Bufo arenarum fertilization.

The role of monovalent (Na+, K+) and divalent (Ca2+, Mg2+) cations in Bufo arenarum fertilization was analysed. Our results showed that the highest fertilization percentages were obtained when strings of uterine oocytes (UO) were inseminated. Under these conditions, full jelly (FJ), which represents the jelly coats surrounding the oocytes at the time of deposition, contained 68.5 +/- 7.0 mM Na+, 27.4 +/- 2.4 mM K+, 6.3 +/- 0.9 mM Ca2+ and 6.9 +/- 0.9 mM Mg2+. When the strings of oocytes were washed in deionized water, these cations diffused into the liquid medium surrounding them. There was a marked similarity between the loss of Ca2+ in the jelly and the decrease in the fertilizability of the UO. Furthermore, the use of chelating agents of divalent cations showed the importance of the Ca2+ contained in the jelly. When Ca2+ was sequestered from the jelly coats by the addition of the chelating agents to the insemination medium as well as by pretreatment of the UO strings, a decrease in fertilization percentages occurred, this effect being dose dependent and more marked with EGTA. These results demonstrate that the Ca2+ in the jelly plays a role in fertilization. Nevertheless, taking into account that during the washing of the jelly other jelly coat components were diffused and considering that the addition of Ca2+ to the insemination medium reverted significantly, but only partially, the loss of fertilizability of jellied UO (washed), the participation of other components in the fertilization mechanism is suggested.

A compact and high-resolution version of a capacitively coupled contactless conductivity detector.

An all-in-one version of a capacitively coupled contactless conductivity detector is introduced. The absence of moving parts (potentiometers and connectors) makes it compact (6.5 cm(3)) and robust. A local oscillator, working at 1.1 MHz, was optimized to use capillaries of id from 20 to 100 microm. Low noise circuitry and a high-resolution analog-to-digital converter (ADC) (21 bits effective) grant good sensitivities for capillaries and background electrolytes currently used in capillary electrophoresis. The fixed frequency and amplitude of the signal generator is a drawback that is compensated by the steady calibration curves for conductivity. Another advantage is the possibility of determining the inner diameter of a capillary by reading the ADC when air and subsequently water flow through the capillary. The difference of ADC reading may be converted into the inner diameter by a calibration curve. This feature is granted by the 21-bit ADC, which eliminates the necessity of baseline compensation by hardware. In a typical application, the limits of detection based on the 3sigma criterion (without baseline filtering) were 0.6, 0.4, 0.3, 0.5, 0.6, and 0.8 micromol/L for K(+), Ba(2+), Ca(2+), Na(+), Mg(2+), and Li(+), respectively, which is comparable to other high-quality implementations of a capacitively coupled contactless conductivity detector.

Theoretical study on the series of [Au(3)Cl (3)M (2)] complexes, with M = Li, Na, K, Rb, Cs.

The prediction of the series of complexes [Au(3)Cl(3)M(2)] with M = Li, Na, K, Rb and Cs, has been achieved at the ab initio level of theory. All geometries were fully optimized at the MP2 level of theory; the central Au(3) cluster is capped by chlorine atoms and the alkaline metals lie above and below the plane of the central ring; aurophilic interactions were found on the metal cluster, and also a strong aromatic character coming from the delocalized d-electrons of the Au atoms according to nuclear independent chemical shift calculations. On the other hand, the chemical hardness parameter was used to test the stability of the series of complexes, and the Fukui indexes of electrophilic and nucleophilic attack were employed to explore possible sites where chemical reactivity may play a role.

Multielement analysis of argentinean lemon juices by instrumental neutronic activation analysis and their classification according to geographical origin.

Multielement analysis of lemon juices from different Argentinean regions was carried out by instrumental neutronic activation analysis (INAA) with the aim at developing a reliable method in the traceability of the origin of lemon juices. This work presents a characterization of 44 lemon juice samples selected from three different geographical origins in the Northwest region of Argentina. Multivariate chemometric techniques such principal component analysis and lineal discriminant analysis (LDA) were used with the aim of classifying the juices and identifying the most significant parameters. Eleven elements were determined (Br, As, Na, Rb, La, Cr, Sc, Fe, Co, Zn, and Sb). The analytical method was validated by analyzing the standard reference material IAEA V-10 (hay powder); the results are within +/-10% of the reported values for the majority of the elements. Biplots of LDA scores for the INAA data illustrate clear separation between each sample.

Fabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner electrophoresis microchips.

In this report, we describe the microfabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner (PT) electrophoresis microchips using toner masks. Planar electrodes were fabricated by three simple steps: (i) drawing and laser-printing the electrode geometry on polyester films, (ii) sputtering deposition onto substrates, and (iii) removal of toner layer by a lift-off process. The polyester film with anchored electrodes was integrated to PT electrophoresis microchannels by lamination at 120 degrees C in less than 1 min. The electrodes were designed in an antiparallel configuration with 750 microm width and 750 microm gap between them. The best results were recorded with a frequency of 400 kHz and 10 Vpp using a sinusoidal wave. The analytical performance of the proposed microchip was evaluated by electrophoretic separation of potassium, sodium and lithium in 150 microm wide x 6 microm deep microchannels. Under an electric field of 250 V/cm the analytes were successfully separated in less than 90 s with efficiencies ranging from 7000 to 13,000 plates. The detection limits (S/N = 3) found for K+, Na+, and Li+ were 3.1, 4.3, and 7.2 micromol/L, respectively. Besides the low-cost and instrumental simplicity, the integrated PT chip eliminates the problem of manual alignment and gluing of the electrodes, permitting more robustness and better reproducibility, therefore, more suitable for mass production of electrophoresis microchips.

Effect of evaporation and pasteurization in the biochemical and immunological composition of human milk.

OBJECTIVE: To assess the effects of evaporation and pasteurization of human milk on its biochemical and immunological composition and on its osmolarity. METHODS: The samples of mature human milk were categorized into four study groups: in natura human milk, pasteurized human milk, human milk evaporated at 70% of the baseline volume and human milk pasteurized and evaporated at 70%, with 12 different samples of milk in each group. The samples were used to determine the concentrations of sodium, potassium, calcium, phosphorus, magnesium, protein, fat, lactose, immunoglobulin A and osmolarity. RESULTS: The pasteurization of human milk did not show statistically significant changes in the concentration of sodium, potassium, calcium, phosphorus, magnesium, protein, fat, lactose, or in osmolarity; however, it showed remarkable reduction in the mean concentration of immunoglobulin A. Evaporation had a mean increase of 38% in the concentration of sodium, potassium, calcium, phosphorus, magnesium, protein, fat and lactose and mean reduction of 45% in the concentration of immunoglobulin A, without significant change in osmolarity in unprocessed milk. CONCLUSION: By evaporation at 70% of the baseline value of human milk, it is possible to obtain human milk that meets the nutritional requirements recommended for preterm infants, except for calcium and phosphorus.