Influence of biochar on the removal of Microcystin-LR and Saxitoxin from aqueous solutions.

The present study assessed the effective use of biochar for the adsorption of two potent HAB toxins namely, Microcystin-LR (MCLR) and Saxitoxin (STX) through a combination of dosage, kinetic, equilibrium, initial pH, and competitive adsorption experiments. The adsorption results suggest that biochar has excellent capabilities for removing MCLR and STX, with STX reporting higher adsorption capacities (622.53-3507.46 µg/g). STX removal required a minimal dosage of 0.02 g/L, while MCLR removal needed 0.4 g/L for > 90%. Similarly, a shorter contact time was required for STX removal compared to MCLR for > 90% of toxin removed from water. Initial pH study revealed that for MCLR acidic conditions favored higher uptake while STX favored basic conditions. Kinetic studies revealed that the Elovich model to be most suitable for both toxins, while STX also showed suitable fittings for Pseudo-First Order and Pseudo-Second Order in individual toxin systems. Similarly, for the Elovich model the most suited kinetic model for both toxins in presence of each other. Isotherm studies confirmed the Langmuir-Freundlich model as the best fit for both toxins. These results suggest adsorption mechanisms including pore filling, hydrogen bonding, π-π interactions, hydrophobic interactions, electrostatic attraction, and dispersive interactions.

Engineering of molecularly imprinted cavity within 3D covalent organic frameworks: An innovation for enhanced extraction and removal of microcystins.

The scarcity of selective adsorbents for efficient extraction and removal of microcystins (MCs) from complex samples greatly limits the precise detection and effective control of MCs. Three-dimensional covalent organic frameworks (3D COFs), characterized by their large specific surface areas and highly ordered rigid structure, are promising candidates, but suffer from lack of specific recognition. Herein, we design to engineer molecularly imprinted cavities within 3D COFs via molecularly imprinted technology, creating a novel adsorbent with exceptional selectivity, kinetics and capacity for the efficient extraction and removal of MCs. As proof-of-concept, a new CC bond-containing 3D COF, designated JNU-7, is designed and prepared for copolymerization with methacrylic acid, the pseudo template L-arginine and ethylene dimethacrylate to yield the JNU-7 based molecularly imprinted polymer (JNU-7-MIP). The JNU-7-MIP exhibits a great adsorption capacity (156 mg g-1) for L-arginine. Subsequently, the JNU-7-MIP based solid-phase extraction coupled with high performance liquid chromatography-mass spectrometry achieves low detection limit of 0.008 ng mL-1, wide linear range of 0.025-100 ng mL-1, high enrichment factor of 186, rapid extraction of 10 min, and good recoveries of 92.4%-106.5% for MC-LR. Moreover, the JNU-7-MIP can rapidly remove the MC-LR from 1 mg L-1 to levels (0.26-0.35 µg L-1) lower than the WHO recommended limit for drinking water (1 µg L-1). This work reveals the considerable potential of 3D COF based MIPs as promising adsorbents for the extraction and removal of contaminants in complex real samples.

Novel Ag3PO4/ZnWO4-modified graphite felt electrode for photoelectrocatalytic removal of harmful algae: Performance and mechanism.

A novel Ag3PO4/ZnWO4-modified graphite felt electrode (AZW@GF) was prepared by drop coating method and applied to photoelectrocatalytic removal of harmful algae. Results showed that approximately 99.21% of chlorophyll a and 91.57% of Microcystin-LR (MCLR) were degraded by the AZW@GF-Pt photoelectrocatalytic system under the optimal operating conditions with a rate constant of 0.02617 min-1 and 0.01416 min-1, respectively. The calculated synergistic coefficient of photoelectrocatalytic algal removal and MC-LR degradation by the AZW@GF-Pt system was both larger than 1.9. In addition, the experiments of quenching experiments and electron spin resonance (ESR) revealed that the photoelectrocatalytic reaction mainly generated •OH and •O2- for algal removal and MC-LR degradation. Furthermore, the potential pathway for photoelectrocatalytic degradation of MC-LR was proposed. Finally, the photoelectrocatalytic cycle algae removal experiments were carried out on AZW@GF electrode, which was found to maintain the algae removal efficiency at about 91% after three cycles of use, indicating that the photoelectrocatalysis of AZW@GF electrode is an effective emergency algae removal technology.

Analysis of Total-Forms of Cyanotoxins Microcystins in Biological Matrices: A Methodological Review.

Microcystins (MCs) are cyclic heptapeptidic toxins produced by many cyanobacteria. Microcystins can be accumulated in various matrices in two forms: a free cellular fraction and a covalently protein-bound form. To detect and quantify the concentration of microcystins, a panel of techniques on various matrices (water, sediments, and animal tissues) is available. The analysis of MCs can concern the free or the total (free plus covalently bound) fractions. Free-form analyses of MCs are the most common and easiest to detect, whereas total-form analyses are much less frequent and more complex to achieve. The objective of this review is to summarize the different methods of extraction and analysis that have been developed for total forms. Four extraction methods were identified: MMPB (2-methyl-3-methoxy-4-phenylbutyric acid) method, deconjugation at basic pH, ozonolysis, and laser irradiation desorption. The study of the bibliography on the methods of extraction and analysis of the total forms of MCs showed that the reference method for the subject remains the MMPB method even if alternative methods and, in particular, deconjugation at basic pH, showed results encouraging the continuation of the methodological development on different matrices and on naturally-contaminated samples.

Phytoremediation of CYN, MC-LR and ANTX-a from Water by the Submerged Macrophyte Lemna trisulca.

Cyanotoxins are harmful to aquatic and water-related organisms. In this study, Lemna trisulca was tested as a phytoremediation agent for three common cyanotoxins produced by bloom-forming cyanobacteria. Cocultivation of L. trisulca with Dolichospermum flos-aquae in BG11 medium caused a release of the intracellular pool of anatoxin-a into the medium and the adsorption of 92% of the toxin by the plant-after 14 days, the total amount of toxin decreased 3.17 times. Cocultivation with Raphidopsis raciborskii caused a 2.77-time reduction in the concentration of cylindrospermopsin (CYN) in comparison to the control (62% of the total pool of CYN was associated with the plant). The greatest toxin limitation was noted for cocultivation with Microcystis aeruginosa. After two weeks, the microcystin-LR (MC-LR) concentration decreased more than 310 times. The macrophyte also influenced the growth and development of cyanobacteria cells. Overall, 14 days of cocultivation reduced the biomass of D. flos-aquae, M. aeruginosa, and R. raciborskii by 8, 12, and 3 times, and chlorophyll a concentration in comparison to the control decreased by 17.5, 4.3, and 32.6 times, respectively. Additionally, the macrophyte stabilized the electrical conductivity (EC) and pH values of the water and affected the even uptake of cations and anions from the medium. The obtained results indicate the biotechnological potential of L. trisulca for limiting the development of harmful cyanobacterial blooms and their toxicity.

Selection of Covalent Organic Framework Pore Functionalities for Differential Adsorption of Microcystin Toxin Analogues.

Microcystins (MCs), produced by Microcystis sp, are the most commonly detected cyanotoxins in freshwater, and due to their toxicity, worldwide distribution, and persistence in water, an improvement in the monitoring programs for their early detection and removal from water is necessary. To this end, we investigate the performance of three covalent organic frameworks (COFs), TpBD-(CF3)2, TpBD-(NO2)2, and TpBD-(NH2)2, for the adsorption of the most common and/or toxic MC derivatives, MC-LR, MC-RR, MC-LA, and MC-YR, from water. While MC-LR and MC-YR can be efficiently adsorbed using all three COF derivatives, high adsorption efficiencies were found for the most lipophilic toxin, MC-LA, with TpBD-(NH2)2, and the most hydrophilic one, MC-RR, with TpBD-(NO2). Theoretical calculations revealed that MC-LA and MC-RR have a tendency to be located mainly on the COF surface, interacting through hydrogen bonds with the amino and nitro functional groups of TpBD-(NH2)2 and TpBD-(NO2)2, respectively. TpBD-(NO2)2 outperforms the adsorbent materials reported for the capture of MC-RR, resulting in an increase in the maximum adsorption capacity by one order of magnitude. TpBD-(NH2)2 is reported as the first efficient adsorbent material for the capture of MC-LA. Large differences in desorption efficiencies were observed for the MCs with different COFs, highlighting the importance of COF-adsorbate interactions in the material recovery. Herein we show that efficient capture of these toxins from water can be achieved through the proper selection of the COF material. More importantly, this study demonstrates that by careful choice of COF functionalities, specific compounds can be targeted or excluded from a group of analogues, providing insight into the design of more efficient and selective adsorbent materials.

Cytotoxic and Genotoxic Effects of Cyanobacterial and Algal Extracts-Microcystin and Retinoic Acid Content.

In the last decade, it has become evident that complex mixtures of cyanobacterial bioactive substances, simultaneously present in blooms, often exert adverse effects that are different from those of pure cyanotoxins, and awareness has been raised on the importance of studying complex mixtures and chemical interactions. We aimed to investigate cytotoxic and genotoxic effects of complex extracts from laboratory cultures of cyanobacterial species from different orders (Cylindrospermopsis raciborskii, Aphanizomenon gracile, Microcystis aeruginosa, M. viridis, M. ichtyoblabe, Planktothrix agardhii, Limnothrix redekei) and algae (Desmodesmus quadricauda), and examine possible relationships between the observed effects and toxin and retinoic acid (RA) content in the extracts. The cytotoxic and genotoxic effects of the extracts were studied in the human hepatocellular carcinoma HepG2 cell line, using the MTT assay, and the comet and cytokinesis-block micronucleus (cytome) assays, respectively. Liquid chromatography electrospray ionization mass spectrometry (LC/ESI-MS) was used to detect toxins (microcystins (MC-LR, MC-RR, MC-YR) and cylindrospermopsin) and RAs (ATRA and 9cis-RA) in the extracts. Six out of eight extracts were cytotoxic (0.04-2 mgDM/mL), and five induced DNA strand breaks at non-cytotoxic concentrations (0.2-2 mgDM/mL). The extracts with genotoxic activity also had the highest content of RAs and there was a linear association between RA content and genotoxicity, indicating their possible involvement; however further research is needed to identify and confirm the compounds involved and to elucidate possible genotoxic effects of RAs.

Potential Impacts on Treated Water Quality of Recycling Dewatered Sludge Supernatant during Harmful Cyanobacterial Blooms.

Cyanobacterial blooms and the associated release of cyanotoxins pose problems for many conventional water treatment plants due to their limited removal by typical unit operations. In this study, a conventional water treatment process consisting of coagulation, flocculation, sedimentation, filtration, and sludge dewatering was assessed in lab-scale experiments to measure the removal of microcystin-LR and Microcystis aeruginosa cells using liquid chromatography with mass spectrometer (LC-MS) and a hemacytometer, respectively. The overall goal was to determine the effect of recycling cyanotoxin-laden dewatered sludge supernatant on treated water quality. The lab-scale experimental system was able to maintain the effluent water quality below relevant the United States Environmental Protection Agency (US EPA) and World Health Organisation (WHO) standards for every parameter analyzed at influent concentrations of M. aeruginosa above 106 cells/mL. However, substantial increases of 0.171 NTU (Nephelometric Turbidity Unit), 7 × 104 cells/L, and 0.26 µg/L in turbidity, cyanobacteria cell counts, and microcystin-LR concentration were observed at the time of dewatered supernatant injection. Microcystin-LR concentrations of 1.55 µg/L and 0.25 µg/L were still observed in the dewatering process over 24 and 48 h, respectively, after the initial addition of M.aeruginosa cells, suggesting the possibility that a single cyanobacterial bloom may affect the filtered water quality long after the bloom has dissipated when sludge supernatant recycling is practiced.

Removal of cyanobacteria and cyanotoxins by ferrate from polluted lake water.

Freshwater cyanobacterial blooms are becoming increasingly problematic microbiological pollutants, especially for the water resource and surface natural lakes. Cyanobacterial blooms, which produce toxins and microcystins, negatively affect the quality of water, animal, and human health, and they have also negative impact on recreational activities. The effect of electrochemically prepared potassium ferrate (green oxidation agent) on the water polluted by cyanobacteria and cyanotoxins was studied. The two most frequently occurring cyanobacterial genus Microcystis and Anabaena and the most toxic and abundant microcystin MC-LR were successfully inactivated and treated by ferrate. Potassium ferrates were applied at different conditions, such as varied hydrodynamics flow of samples, pH, and Fe(VI) concentrations. High detected elimination efficiency was consequently tested on the real water matrix from microbiological polluted natural lake Sastín-Gazárka in Slovakia. The ferrate application leads to the better chemical, biological, microbiological, and ecotoxicological outcomes.

Enhanced Photocatalytic Removal of Cyanotoxins by Al-Doped ZnO Nanoparticles with Visible-LED Irradiation.

The ZnO-based visible-LED photocatalytic degradation and mineralization of two typical cyanotoxins, microcystin-LR (MC-LR), and anatoxin-A were examined. Al-doped ZnO nanoparticle photocatalysts, in Al:Zn ratios between 0 and 5 at.%, were prepared via sol-gel method and exhaustively characterized by X-ray diffraction, transmission electron microscopy, UV-vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, and nitrogen adsorption-desorption isotherms. With both cyanotoxins, increasing the Al content enhances the degradation kinetics, hence the use of nanoparticles with 5 at.% Al content (A5ZO). The dosage affected both cyanotoxins similarly, and the photocatalytic degradation kinetics improved with photocatalyst concentrations between 0.5 and 1.0 g L-1. Nevertheless, the pH study revealed that the chemical state of a species decisively facilitates the mutual interaction of cyanotoxin and photocatalysts. A5ZO nanoparticles achieved better outcomes than other photocatalysts to date, and after 180 min, the mineralization of anatoxin-A was virtually complete in weak alkaline medium, whereas only 45% of MC-LR was in neutral conditions. Moreover, photocatalyst reusability is clear for anatoxin-A, but it is adversely affected for MC-LR.

Utility of a PCR-based method for rapid and specific detection of toxigenic Microcystis spp. in farm ponds.

Microcystis is a widespread freshwater cyanobacterium that can produce microcystin, a potent hepatotoxin harmful to animals and humans. Therefore, it is crucial to monitor for the presence of toxigenic Microcystis spp. to provide early warning of potential microcystin contamination. Microscopy, which has been used traditionally to identify Microcystis spp., cannot differentiate toxigenic from non-toxigenic Microcystis. We developed a PCR-based method to detect toxigenic Microcystis spp. based on detection of the microcystin synthetase C (mcyC) gene and 16S rRNA gene. Specificity was validated against toxic and nontoxic M. aeruginosa strains, as well as 4 intergeneric freshwater cyanobacterial strains. Analytical sensitivity was as low as 747 fg/µL genomic DNA (or 3 cells/µL) for toxic M. aeruginosa. Furthermore, we tested 60 water samples from 4 farm ponds providing drinking water to swine facilities in the midwestern United States using this method. Although all water samples were positive for Microcystis spp. (i.e., 16S rRNA gene), toxigenic Microcystis spp. were detected in only 34 samples (57%). Seventeen water samples contained microcystin (0.1-9.1 µg/L) determined with liquid chromatography-mass spectrometry, of which 14 samples (82%) were positive for mcyC. A significant correlation was found between the presence of toxigenic Microcystis spp. and microcystin in water samples (p = 0.0004). Our PCR method can be a low-cost molecular tool for rapid and specific identification of toxigenic Microcystis spp. in farm ponds, improving detection of microcystin contamination, and ensuring water safety for farm animals.

Chemically labeled toxins or bioactive peptides show a heterogeneous intracellular distribution and low spatial overlap with autofluorescence in bloom-forming cyanobacteria.

Harmful algal blooms formed by colony-forming cyanobacteria deteriorate water resources by producing cyanotoxins, which frequently occur at high intracellular concentrations. We aimed to localize toxic microcystins (MCs) and bioactive anabaenopeptins (APs) at the subcellular level under noninvasive conditions. Since both metabolites are synthesized nonribosomally, the relaxed specificity of key enzymes catalyzing substrate activation allowed chemical labeling through a standard copper-catalyzed click chemistry reaction. The genera Planktothrix and Microcystis specifically incorporated unnatural amino acids such as N-propargyloxy-carbonyl-L-lysine or O-propargyl-L-tyrosine, resulting in modified AP or MC peptides carrying the incorporated alkyne moiety. The labeled cells were quantitatively differentiated from the unlabeled control cells. MCs and APs occurred intracellularly as distinct entities showing a cell-wide distribution but a lowered spatial overlap with natural autofluorescence. Using the immunofluorescence technique, colocalization with markers of individual organelles was utilized to relate the distribution of labeled MCs to cellular compartments, e.g., using RbcL and FtsZ (cytosol) and PsbA (thylakoids). The colocalization correlation coefficients calculated pairwise between organelles and autofluorescence were highly positive as opposed to the relatively low positive indices derived from labeled MCs. The lower correlation coefficients imply that only a portion of the labeled MC molecules were related spatially to the organelles in the cell.

Isolation and Characterization of [DLeu1]microcystin-LY from Microcystis aeruginosa CPCC-464.

[D-Leu1]MC-LY (1) ([M + H]+m/z 1044.5673, Δ 2.0 ppm), a new microcystin, was isolated from Microcystis aeruginosa strain CPCC464. The compound was characterized by 1H and 13C NMR spectroscopy, liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS) and UV spectroscopy. A calibration reference material was produced after quantitation by 1H NMR spectroscopy and LC with chemiluminescence nitrogen detection. The potency of 1 in a protein phosphatase 2A inhibition assay was essentially the same as for MCLR (2). Related microcystins, [D-Leu1]MC-LR (3) ([M + H]+m/z 1037.6041, Δ 1.0 ppm), [D-Leu1]MC-M(O)R (6) ([M + H]+m/z 1071.5565, Δ 2.0 ppm) and [D-Leu1]MC-MR (7) ([M + H]+m/z 1055.5617, Δ 2.2 ppm), were also identified in culture extracts, along with traces of [D-Leu1]MC-M(O2)R (8) ([M + H]+m/z 1087.5510, Δ 1.6 ppm), by a combination of chemical derivatization and LC-HRMS/MS experiments. The relative abundances of 1, 3, 6, 7 and 8 in a freshly extracted culture in the positive ionization mode LC-HRMS were ca. 84, 100, 3.0, 11 and 0.05, respectively. These and other results indicate that [D-Leu1]-containing MCs may be more common in cyanobacterial blooms than is generally appreciated but are easily overlooked with standard targeted LC-MS/MS screening methods.

The effects of Microcystis aeruginosa cells lysate containing microcystins on physiological and molecular responses in the nematode Caenorhabditis elegans.

Microcystins (MCs) are potent toxins produced by environmental cyanobacterial blooms. The present study evaluated the effects of a Microcystis aeruginosa cyanobacterial lysate containing 0.1, 1, and 10 µg L-1 MC-LR equivalent in the C. elegans Bristol N2 wild-type and the effects caused by equivalent concentrations of a MC-LR standard. The lysate was prepared from a culture of toxic strain (RST9501) originated from the Patos Lagoon Estuary (RS, Brazil). The minimal concentration necessary to cause significant effects in C. elegans under exposure to M. aeruginosa lysate or to MC-LR standard were, respectively, 10 and 0.1 µg L-1 MC-LR equivalent for growth and 10 and 1 µg L-1 MC-LR equivalent for fertility. Reproduction (ie, brood size) was only affected by the exposure to 10 µg L-1 MC-LR standard and was not affected by the lysate. The nematodes that were exposed to lysate containing 1 µg L-1 MC-LR equivalent or MC-LR were also analyzed for pharyngeal pumping and gene expression using RT-qPCR. The worms' rhythmic contractions of the pharynx were similarly affected by the lysate containing 1 µg L-1 of MC-LR equivalent and the MC-LR standard. The MC-LR standard caused down-regulation of genes related to growth (daf-16), fertility (spe-10), and biotransformation (gst-2). This is the first study to evaluate the effects of a toxic cyanobacterial lysate using the C. elegans model. This study suggests the organism as a potential biotest to evaluate toxicity of natural waters containing M. aeruginosa cells and to environmental risk assessment associated to cyanobacterial bloom events.

Optimization on preparation of Fe3O4/chitosan as potential matrix material for the removal of microcystin-LR and its evaluation of adsorption properties.

Adsorbent Fe3O4/chitosan was successfully synthesized for the removal of microcystin-LR and characterized by Scanning electron microscope, Fourier transform infra-red, thermogravimetric analysis and vibrating sample magnetometer. The effects of reaction conditions, including pH, temperature and ratio of Fe3O4 to chitosan on microcystin-LR adsorption capacity were investigated by the Box-Behnken response surface methodology design, and the optimal adsorption conditions were determined. The adsorption properties of microcystin-LR were examined by adsorption kinetics, isothermal and thermodynamics experiments. The results demonstrated that Fe3O4/chitosan was successfully prepared and the maximum adsorption capacity of microcystin-LR was under optimum conditions in which pH value was 5.53, temperature was 40 °C and the ratio of Fe3O4 to chitosan was 1:1.39. The data revealed that kinetics was fitted well with the pseudo-second-order model, Langmuir isotherm model was more appropriate for describing than the Freundlich isotherm model and the adsorption of microcystin-LR was a spontaneous process. The material maintained good adsorption capacity after five cycles. The results suggested that Fe3O4/chitosan was an efficient and low-cost adsorbent for removing microcystin-LR from polluted water.

Identification and characterization of the dominant Microcystis sp. cyanobacteria detected in Lake Dong Ting, China.

The presence of cyanobacteria in drinking water, aquatic foods and bathing water has created a significant major problem to global public health as these toxins induce damage in various organ including liver, cardiovascular, intestinal and central nervous systems. Although the morphologic, phylogenetic and toxicogenetic characteristics of cyanobacteria were identified in several lakes in China, many freshwater sources such as Dong Ting Lake, Hunan Province, China remain to be determined. Since the presence of these cyanobacteria may potentially affect human health, the aim of this study was to isolate, identify and characterize the most frequent occurring bloom-forming cyanobacteria in Dong Ting Lake, Hunan Province, China, which can provide information on the safety of utilization of this water source for drinking water, agriculture and recreation. Samples collected from the surface water of Dong Ting Lake were subjected to serial dilution in the lab for morphological analysis. Data demonstrated the morphological features were 2-5 µm diameters with rounded shapes and green color resembling Microcystis sp. The isolated cyanobacterial strain obtained from surface water samples in Dong Ting Lake was termed Microcystis sp. YFM2. The MC concentration was detected by enzyme-linked immunosorbent assay (ELISA) and found to be 92.88 µg/107 cells in Microcystis sp. YFM2. By polymerase chain reaction (PCR) results indicated that Microcystis sp. YFM2 isolated from Dong Ting Lake contained synthetase genes (mcyA-C). Our findings indicated that the dominant cyanobacteria Microcystis sp. YFM2 isolated from the freshwater Dong Ting Lake demonstrated morphologic, phylogenetic and toxicogenetic properties resembling a toxin generating cyanobacterium. Based upon this knowledge, it is essential to monitor the use of this Lake for future domestic, agricultural and recreational purposes.

An ultrasensitive electrochemical sensing method for detection of microcystin-LR based on infinity-shaped DNA structure using double aptamer and terminal deoxynucleotidyl transferase.

This study develops a novel electrochemical sensing platform for microcystin-LR (MC-LR) detection. This aptasensor comprises the hybridization of double aptamer to its complementary strand (CS) on the surface of electrode and generation of an Infinity-shaped DNA structure in the absence of target by terminal deoxynucleotidyl transferase (TdT). The formation of Infinity-shaped construction leads to the development of an ultrasensitive aptasensor for MC-LR detection. In the presence of MC-LR, double aptamer is dissociated from its CS because of its high affinity for MC-LR and leaves the surface of electrode. Subsequently, no Infinity-shaped structure is formed following the introduction of TdT and a strong current signal is observed. The proposed method was employed for specific detection of MC-LR in the range from 60 pM to 1000 nM with a detection limit of 15 pM. The credibility of the approach was confirmed by detection of MC-LR in real samples like serum and tap water samples. This study provides a new aptasensor for detection of MC-LR as well as other toxin analysis.

Monitoring of cyanotoxins in water from hypersaline microalgae colonies by ultra high performance liquid chromatography with diode array and tandem mass spectrometry detection following salting-out liquid-liquid extraction.

In this study two different analytical approaches have been developed to determine the presence of several cyanotoxins in saline water samples from a continental salt marsh. A salting-out assisted liquid-liquid extraction (SALLE) has been used in combination with ultra-high performance liquid chromatography-tandem mass spectrometry and UV-diode array detection (UHPLC-MS/MS and UHPLC-DAD). The target analytes are eight microcystins named MC-RR, MC-YR, MC-LR, MC-WR, MC-LA, MC-LY, MC-LW, MC-LF and nodularin (NOD), covering a wide range of polarities. The separation was achieved using a Zorbax Eclipse Plus RRHD C18 column (50 × 2.1 mm, 1.8 µm) in less than 7.5 and 5.5 min for UV and MS/MS detection, respectively. The mobile phase used consisted of water (solvent A) and acetonitrile (MeCN) (solvent B), both containing 0.01% of formic acid for DAD and 0.4% of formic acid for MS/MS detection, at a flow rate of 0.4 mL min-1. The temperature of the column was set at 25 °C and 20 µL of sample were injected. The main parameters affecting the SALLE procedure were studied and the following optimum values were obtained: neutral pH, 2 mL of acetonitrile as extraction solvent and 1.2 g of ammonium sulfate as salting-out agent for 4 mL of water sample. The validation protocols for both methods were accomplished with real water samples obtaining LODs ranging from 1.0 to 3.4 µg L-1 and 0.02 to 0.11 µg L-1 for DAD and MS/MS respectively. Although the SALLE-UHPLC-DAD methodology is easier and cheaper than UHPLC-MS/MS significantly better detection limits were achieved with tandem mass spectrometry as well as allowing for unambiguous identification. Extraction recoveries were higher than 77.0% (except for MC-RR and NOD which were 53.2% and 54.3, respectively) with satisfactory inter-day and intra-day precisions (RSD below 13.3%).

Oxidation of Microcystic-LR via the solar/chlorine process: Radical mechanism, pathways and toxicity assessment.

Microcystin-LR (MC-LR) is the most widely distributed and harmful variant toxins released by cyanobacteria, which poses potential threaten to people and aquatic animals when entering natural water. In our research, solar/chlorine process was comprehensively investigated to degrade and detoxify MC-LR. Under the chlorine concentration of 1.0 mg L-1, MC-LR (1.0 µM) was decreased by 96.7%, 26%, and 9% by solar/chlorine process, chlorination, and solar irradiation respectively. Quenching experiments confirmed that reactive chlorine species (RCS) and hydroxyl radical (HO) were the predominant reactive species in solar/chlorine process at neutral condition, and ozone was generated because of the participation of triplet-state oxygen (O(3P)). The respective contributions of each reactive species were calculated with the order as: RCS, HO, ozone, and solar irradiation. The presence of HCO3- and natural organic matter in water inhibited the degradation efficiency of MC-LR. Moreover, the transformation products of MC-LR generated during the solar/chlorine process were identified and a possible pathway was proposed. The hepatotoxicity of MC-LR and its transformation products was compared using protein phosphatase 2A. Our experimental results revealed that the concentration and hepatotoxicity of MC-LR both significantly decreased, and most products were not hepatoxic. Overall, the solar/chlorine process is a promising alternative technology to degrade MC-LR during eutrophication.

Simultaneous determination of eight microcystins in fish by PRiME pass-through cleanup and online solid phase extraction coupled to ultra high performance liquid chromatography-tandem mass spectrometry.

A rapid and sensitive method was developed based on online solid phase extraction coupled to ultra high performance liquid chromatography-tandem mass spectrometry (online SPE-UHPLC-MS/MS) for the simultaneous determination of eight common microcystins (MCs) in fish. Analytes, including MC-LR, MC-RR, MC-LY, MC-LW, MC-YR, MC-WR, MC-LF and MC-LA, were extracted by the solvent of MeOH: water (80:20, v/v) with 0.1% FA, and the extracted solution was cleaned up by one-step PRiME (process, robustness, improvements, matrix effects, ease of use) procedure before online SPE-UHPLC-MS/MS analysis. After the optimization of sample pretreatment conditions and instrumental parameters, method validation experiments were carried out to evaluate the performance of the method Good linearities were obtained in the range of 0.5-20 µg/L with r2 larger than 0.99. The average recoveries of eight MCs spiked at 2, 10 and 20 µg/kg in fish samples were from 70.5% to 98.9% with relative standard deviations (RSDs) 1.3%-3.5% for repeatability and 2.2%-7.3% for reproducibility. Limits of detections (LODs) were ranged from 0.1 to 0.5 µg/kg and Limits of quantifications (LOQs) were in the range of 0.3-1.5 µg/kg. The developed method was further applied to the analysis of fish samples collected from Lake Taihu, China. MC-LR, MC-YR and MC-RR were detected in the range of 0.5-3.1 µg/kg. The experimental results proved the feasibility of the developed method for the identification and quantification of various MCs in fish products.