Mechanistic Assessment of Metabolic Interaction between Single Oral Commensal Cells by Scanning Electrochemical Microscopy.

The human oral microbiome heavily influences the status of oral and systemic diseases through different microbial compositions and complex signaling between microbes. Recent evidence suggests that investigation of interactions between oral microbes can be utilized to understand how stable communities are maintained and how they may preserve health. Herein, we investigate two highly abundant species in the human supragingival plaque, Streptococcus mitis and Corynebacterium matruchotii, to elucidate their real-time chemical communication in commensal harmony. Specifically, we apply nanoscale scanning electrochemical microscopy (SECM) using a submicropipet-supported interface between two immiscible electrolyte solutions as an SECM probe not only to image the permeability of S. mitis and C. matruchotii membranes to tetraethylammonium (TEA+) probe ions but also to real-time visualize the metabolic interaction between two microbes via lactate production/consumption at a single-cell level. The metabolic relationship between two strains is quantitatively assessed by determining (1) the passive permeability of both bacterial membranes of 2.4 × 10-4 cm/s to the free diffusion of TEA+, (2) 0.5 mM of the lactate concentration produced by a single S. mitis strain at a rate of 2.7 × 10-4 cm/s, and (3) a lactate oxidation rate ≥5.0 × 106 s-1 by an individual C. matruchotii strain. Significantly, this study, for the first time, describes a mechanism of in situ metabolic interaction between oral commensals at the single-cell level through quantitative analysis, which supports the observed in vivo spatial arrangements of these microbes.

Simultaneous Chemical Mapping of Live Biofilm Microenvironmental pH and Hydrogen Peroxide in Real Time with a Triple Scanning Electrochemical Microscopy Tip.

Dental plaque biofilm is a complex ecosystem. The distribution of microbial species in the biofilm is heavily influenced by local chemical interactions that result from diverse metabolic activities and the nature of the released molecules. As a relevant example, H2O2-producing bacteria can antagonize disease-associated bacteria, leading to the maintenance of a healthy oral microbiome. Herein, we report the development of a triple-sensor (redox, pH, and H2O2) scanning electrochemical microscopy (SECM) tip capable of simultaneously mapping the pH and H2O2 concentration produced by a dental plaque-derived multispecies biofilm grown on hydroxyapatite. The pH sensor of the triple SECM tip showed a near Nernstian slope of -71.1 ± 2 mV/pH (N = 3), whereas the H2O2 sensor showed a slope of -0.052 ± 0.002 nA/µM H2O2 at pH 7.2 and a detection limit of 1.0 ± 0.2 µM (N = 7). There is no significant difference in the sensitivities of H2O2 sensors at pH 6.2, 7.2, and 8.2 at 95% CI (N = 7). The pH and H2O2 sensors demonstrated excellent reversibility with response times of 3 and 5 s, respectively, along with reliable stability over 4 h at 37 °C. The sensors did not show any cross talk between pH and H2O2 concentration ([H2O2]) measurements, highlighting the accuracy and versatility of the SECM tip. Simultaneous chemical imaging of pH and [H2O2] across the biofilm revealed a clustered distribution of local H2O2 concentrations, ranging from 0 to 17 µM. Conversely, the local pH remained constant at 7.2. The relation of local chemical profiles and the distribution of bacterial species within the oral microbiome was experimentally investigated in the context of bacterial H2O2 antagonism. The benefit of clustered H2O2 production was that the total area of H2O2 produced by smaller clusters was 67% more than that of a single cluster with the same starting number of bacteria. Thus, this triple SECM tip can potentially be used to study local molecular mechanisms that result in dysbiosis of the oral microbiome.

Profiling H2O2 from single COS-7 cells by means of scanning electrochemical microscopy.

We report quantitative determination of extracellular H2O2 released from single COS-7 cells with high spatial resolution, using scanning electrochemical microscopy (SECM). Our strategy of depth scan imaging in vertical x-z plane was conveniently utilized to a single cell for obtaining probe approach curves (PACs) to any positions on the membrane of a live cell by simply drawing a vertical line on one depth SECM image. This SECM mode provides an efficient way to record a batch of PACs, and visualize cell topography simultaneously. The H2O2 concentration at the membrane surface in the center of an intact COS-7 cell was deconvoluted from apparent O2, and determined to be 0.020 mM by overlapping the experimental PAC with the simulated one having a known H2O2 release value. The H2O2 profile determined in this way gives insight into physiological activity of single live cells. In addition, intracellular H2O2 profile was demonstrated using confocal microscopy by labelling the cells with a luminomphore, 2',7'-dichlorodihydrofluorescein diacetate. The two methodologies have illustrated complementary experimental results of H2O2 detection, indicating that H2O2 generation is centered at endoplasmic reticula.

In Situ and Quantitatively Imaging of Heat-Induced Oxidative State and Oxidative Damage of Living Neurons Using Scanning Electrochemical Microscopy.

Central nervous system is sensitive and vulnerable to heat. Oxidative state and oxidative damage of neurons under heat stress are vital for understanding early consequences and mechanisms of heat-related neuronal injury, which remains elusive partly due to the technical challenge of in situ and quantitative monitoring methods. Herein, a temperature-controlled scanning electrochemical microscopy (SECM) platform with programmable pulse potential and depth scan modes is developed for in situ and quantitatively monitoring of oxygen consumption, extracellular hydrogen peroxide level, and cell membrane permeability of neurons under thermal microenvironment of 37-42 °C. The SECM results show that neuronal oxygen consumption reaches a maximum at 40 °C and then decreases, extracellular H2 O2 level increases from 39 °C, and membrane permeability increases from 2.0 ± 0.6 × 10-5 to 7.2 ± 0.8 × 10-5 m s-1 from 39 to 42 °C. The therapeutic effect on oxidative damage of neurons under hyperthermia conditions (40-42 °C) is further evaluated by SECM and fluorescence methods, which can be partially alleviated by the potent antioxidant edaravone. This work realizes in situ and quantitatively observing the heat-induced oxidative state and oxidative damage of living neurons using SECM for the first time, which results can contribute to a better understanding of the heat-related cellular injury mechanism.

Rapid removal of Cr(III) from high-salinity wastewater by cellulose-g-poly-(acrylamide-co-sulfonic acid) polymeric bio-adsorbent.

A cellulose-g-poly-(acrylamide-co-sulfonic acid) polymeric bio-adsorbent (CASA) was prepared by grafting copolymerization, and used to adsorb Cr(III) from leather wastewater. The SEM, XRD, FTIR, and XPS results showed that CASA contains many spherical particles and functional groups such as NH2, CO, and HSO3. The adsorption experiments revealed that CASA presented excellent adsorption performance for Cr(III) (274.69 mg/g of max adsorption capacity) from high-salinity wastewater, which was much better than other reported adsorbents with different structures. Meanwhile, adsorption equilibrium could be reached within 10 min due to the introduction of abundant sulfonic acid groups on its surface. In addition, the adsorption process followed the Langmuir adsorption isotherm, and the experimental data conformed to the pseudo-second-order kinetics model. Moreover, the main adsorption mechanisms include chelation, electrostatic interactions, and cation exchange, which provide an important theoretical basis for the removal of toxic inorganic pollutants from leather wastewater.

High-performance green electronic substrate employing flexible and transparent cellulose films.

Today's widely used and rapidly updated electronic substrates are composed of petroleum-based polymers, but the resulting electronic waste (such as Dioxin, oxole, PCBs, etc.) will cause massive harm to the environment and human body. Therefore, we report an effective approach for fabricating recyclable and high-performance cellulose films as green electronic substrates by calendering. The crosslinking between CH and CHCH in cellulose modified by maleic anhydride led to the in-situ formation of a chemical crosslinking network, and hydrogen bonds acted as a sacrificial physical crosslinking network. The dual crosslinked cellulose film exhibits high strength (120.56 MPa), improved elongation (increased by 263%), and outstanding thermal stability (thermal decomposition temperature is 311 °C). Further, the film has been successfully used as a substrate for biomass sensor and realized apparent responses to changes. The scientific strategy paves the way for the large-scale fabrication of high-performance cellulose films and simultaneously promotes green electronic substrates' industrialization.

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level.

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 µm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.

Characterization of Inherently Chiral Electrosynthesized Oligomeric Films by Voltammetry and Scanning Electrochemical Microscopy (SECM).

A voltammetric and scanning electrochemical microscopy (SECM) investigation was performed on an inherently chiral oligomer-coated gold electrode to establish its general properties (i.e., conductivity and topography), as well as its ability to discriminate chiral electroactive probe molecules. The electroactive monomer (S)-2,2'-bis(2,2'-bithiophene-5-yl)-3,3'-bibenzothiophene ((S)-BT2T4) was employed as reagent to electrodeposit, by cyclic voltammetry, the inherently chiral oligomer film of (S)-BT2T4 (oligo-(S)-BT2T4) onto the Au electrode surface (resulting in oligo-(S)-BT2T4-Au). SECM measurements, performed in either feedback or competition mode, using the redox mediators [Fe(CN)6]4- and [Fe(CN)6]3- in aqueous solutions, and ferrocene (Fc), (S)-FcEA, (R)-FcEA and rac-FcEA (FcEA is N,N-dimethyl-1-ferrocenylethylamine) in CH3CN solutions, indicated that the oligomer film, as produced, was uncharged. The use of [Fe(CN)6]3- allowed establishing that the oligomer film behaved as a porous insulating membrane, presenting a rather rough surface. This was inferred from both the approach curves and linear and bidimensional SECM scans, which displayed negative feedback effects. The oligomer film acquired semiconducting or fully conducting properties when the Au electrode was biased at potential more positive than 0.6 V vs. Ag|AgCl|KCl. Under the latter conditions, the approach curves displayed positive feedback effects. SECM measurements, performed in competition mode, allowed verifying the discriminating ability of the oligo-(S)-BT2T4 film towards the (S)-FcEA and (R)-FcEA redox mediators, which confirmed the results obtained by cyclic voltammetry. SECM linear scans indicated that the enantiomeric discriminating ability of the oligo-(S)-BT2T4 was even across its entire surface.

Electrochemical detection of neuronal extracellular phosphorylation by PKA, PKC and Src.

The focus of this work described here is to establish a method for monitoring and quantifying the extracellular phosphorylation of Human SHSY5Y undifferentiated neuronal cells by three ectokinases PKA, PKC and Src; these are kinases that are known to be present in the extracellular matrix. Here is demonstrated that a combination of different experimental techniques, including microscopy and electrochemistry, can be used to detect extracellular phosphorylations. Phosphorylation profiles of the three ectokinases, PKA, PKC and Src, were investigated using fluorescence microscopy and the number of phosphorylation sites per kinase was estimated using QCM. Finally, the phosphorylation of the extracellular membrane was determined using electrochemistry. Our results clearly demonstrate the extracellular phosphorylation of neuronal cells and the strength of surface electrochemical techniques in the investigation of cellular phosphorylation.

High-Speed SICM for the Visualization of Nanoscale Dynamic Structural Changes in Hippocampal Neurons.

Dynamic reassembly of the cytoskeleton and structural changes represented by dendritic spines, cargo transport, and synapse formation are closely related to memory. However, the visualization of the nanoscale topography is challenging because of the diffraction limit of optical microscopy. Scanning ion conductance microscopy (SICM) is an effective tool for visualizing the nanoscale topography changes of the cell surface without labeling. The temporal resolution of SICM is a critical issue of live-cell time-lapse imaging. Here, we developed a new scanning method, automation region of interest (AR)-mode SICM, to select the next imaging region by predicting the location of a cell, thus improving the scanning speed of time-lapse imaging. The newly developed algorithm reduced the scanning time by half. The time-lapse images provided not only novel information about nanoscale structural changes but also quantitative information on the dendritic spine and synaptic bouton volume changes and formation process of the neural network that are closely related to memory. Furthermore, translocation of plasmalemmal precursor vesicles (ppvs), for which fluorescent labeling has not been established, were also visualized along with the rearrangement of the cytoskeleton at the growth cone.

Tape-Stripping Electrochemical Detection of Melanoma.

A noninvasive electrochemical melanoma detection approach based on using adhesive tapes for collecting and fixing cells from a suspicious skin area and transferring the cells into a scanning electrochemical microscope (SECM) is presented. The adhesive layer collects the cells reproducibly and keeps them well adhered on the tape during experiments in an electrolyte solution. A melanoma biomarker, here the intracellular enzyme tyrosinase (TYR), was imaged on the tape-collected cells without further cell lysing using antibodies that were labeled with horseradish peroxidase (HRP). The HRP labels catalyzed the oxidation of a dissolved redox-active species, which was detected at a soft microelectrode, gently brushed in contact mode over the tape. The melanoma biomarker was first detected on tape-stripped samples with murine melanoma cells of different concentrations. Thereafter, increasing levels of TYR were recorded in cells that were collected from the skin of melanoma mouse models representing three different stages of tumor growth. Additionally, SECM results of tape-stripped different human melanoma cell lines were confirmed by previous studies based on traditionally fixed and permeabilized cells.

Nanoscale Intelligent Imaging Based on Real-Time Analysis of Approach Curve by Scanning Electrochemical Microscopy.

Scanning electrochemical microscopy (SECM) enables high-resolution imaging by examining the amperometric response of an ultramicroelectrode tip near a substrate. Spatial resolution, however, is compromised for nonflat substrates, where distances from a tip far exceed the tip size to avoid artifacts caused by the tip-substrate contact. Herein, we propose a new imaging mode of SECM based on real-time analysis of the approach curve to actively control nanoscale tip-substrate distances without contact. The power of this software-based method is demonstrated by imaging an insulating substrate with step edges using standard instrumentation without combination of another method for distance measurement, e.g., atomic force microscopy. An ∼500 nm diameter Pt tip approaches down to ∼50 nm from upper and lower terraces of a 500 nm height step edge, which are located by real-time theoretical fitting of an experimental approach curve to ensure the lack of electrochemical reactivity. The tip approach to the step edge can be terminated at <20 nm prior to the tip-substrate contact as soon as the theory deviates from the tip current, which is analyzed numerically afterward to locate the inert edge. The advantageous local adjustment of tip height and tip current at the final point of tip approach distinguishes the proposed imaging mode from other modes based on standard instrumentation. In addition, the glass sheath of the Pt tip is thinned to ∼150 nm to rarely contact the step edge, which is unavoidable and instantaneously detected as an abrupt change in the slope of approach curve to prevent damage of the fragile nanotip.

Scanning electrochemical microscopy in the development of enzymatic sensors and immunosensors.

Scanning electrochemical microscopy (SECM) is very useful, non-invasive tool for the analysis of surfaces pre-modified with biomolecules or by whole cells. This review focuses on the application of SECM technique for the analysis of surfaces pre-modified with enzymes (horseradish peroxidase, alkaline phosphatase and glucose oxidase) or labelled with antibody-enzyme conjugates. The working principles and operating modes of SECM are outlined. The applicability of feedback, generation-collection and redox competition modes of SECM on surfaces modified by enzymes or labelled with antibody-enzyme conjugates is discussed. SECM is important in the development of miniaturized bioanalytical systems with enzymes, since it can provide information about the local enzyme activity. Technical challenges and advantages of SECM, experimental parameters, used enzymes and redox mediators, immunoassay formats and analytical parameters of enzymatic SECM sensors and immunosensors are reviewed.

Systematic Analysis of Different Cell Spheroids with a Microfluidic Device Using Scanning Electrochemical Microscopy and Gene Expression Profiling.

The 3D cell spheroid is an emerging tool that allows better recapitulating of in vivo scenarios with multiple factors such as tissue-like morphology and membrane protein expression that intimately coordinates with enzyme activity, thus providing a psychological environment for tumorigenesis study. For analyzing different spheroids, conventional optical imaging may be hampered by the need for fluorescent labeling, which could cause toxicity side effects. As an alternative approach, scanning electrochemical microscopy (SECM) enables label-free imaging. However, SECM for cell spheroid imaging is currently suffering from incapability of systematically analyzing the cell aggregates from spheroid generation, electrochemical signal gaining, and the gene expression on different individual cell spheroids. Herein, we developed a top-removable microfluidic device for cell aggregate yielding and SECM imaging methodology to analyze heterotypic 3D cell spheroids on a single device. This technique allows not only on-chip culturing of cell aggregates but also SECM imaging of the spheroids after opening the chip and subsequent qPCR assay of corresponding clusters. Through employment of the micropit arrays (85 × 4) with a top withdrawable microfluidic layer, uniformly sized breast tumor cell and fibroblast spheroids can be simultaneously produced on a single device. By leveraging voltage-switching mode SECM at different potentials of dual mediators, we evaluated alkaline phosphatase without disturbance of substrate morphology for distinguishing the tumor aggregates from stroma. Moreover, this method also enables gene expression profiling on individual tumor or stromal spheroids. Therefore, this new strategy can seamlessly bridge SECM measurements and molecular biological analysis.

Analysing single live cells by scanning electrochemical microscopy.

Single live cell analysis methods provide information on the characteristics of individual cells, yielding not only bulk population averages but also their heterogeneity. Scanning electrochemical microscopy (SECM) offers single live cell activities along its topography with high accuracy probe tip positioning. Both intracellular and extracellular processes can be electrochemically examined through the use of SECM. This non-invasive technique allows for high resolution mapping of electrochemical measurements in or around the cell sample of interest. Reactive oxygen species and reactive nitrogen species can be determined in a non-invasive label-free method and utilized as a probe for cellular pathology and physiology. Membrane permeability and rate of membrane species transport can be quantified in SECM. The cell response to external stressors can be monitored and modelled. SECM is able to offer nanoscale mapping and low concentration detection, providing a powerful bioanalytical tool for live cell studies. Herein we present an overview of recent progress in the imaging and characterization of single live cells using SECM.

Comparative analysis of optical microscopy, scanning electron microscopy, and micro-computed tomography on measurements

Abstract: Microscopic measurements are widely used in scientific research and the correct equipment to perform these evaluations could be critical to determine study results. Regarding microscopic measurements, three of the most used methods are: Optical Microscopy (OM), Scanning Electron Microscopy (SEM), and Micro-computed Tomography (MCT). It is important to select the best method for assessing diverse parameters, considering operational characteristics of the method, the equipment efficiency, and the machinery cost. Aim: Therefore, the main objective of this study was to define which is the most useful measurement method for assessing magnitudes below 0.4 mm. Methods: Ten dental implants, with known dimensions as defined by the manufacturer were randomly distributed. Two blinded observers assessed the distance between the second and the third screw vortex of the implants using three suggested methods. The true distance was defined to be 0.5 mm. Results: The assessed distances were: 0.597±0.007mm for OM, 0.578±0.017mm for SEM, and 0.613±0.006mm for MCT. The assessed distances were significantly different when the methods were compared (P>0.01). All measurements were into the CAD tolerances. Conclusion: It was possible to conclude that linear easurements between 595 and 605 µm could be performed by any of the described technologies (AU)

Real-Time Metabolic Interactions between Two Bacterial Species Using a Carbon-Based pH Microsensor as a Scanning Electrochemical Microscopy Probe.

We have developed a carbon-based, fast-response potentiometric pH microsensor for use as a scanning electrochemical microscopy (SECM) chemical probe to quantitatively map the microbial metabolic exchange between two bacterial species, commensal Streptococcus gordonii and pathogenic Streptococcus mutans. The 25 µm diameter H+ ion-selective microelectrode or pH microprobe showed a Nernstian slope of 59 mV/pH and high selectivity against major ions such Na+, K+, Ca2+, and Mg2+. In addition, the unique conductive membrane composition aided us in performing an amperometric approach curve to position the probe and obtain a high-resolution pH map of the microenvironment produced by the lactate-producing S. mutans biofilm. The x-directional pH scan over S. mutans also showed the influence of the pH profile on the metabolic activity of another species, H2O2-producing S. gordonii. When these bacterial species were placed in close spatial proximity, we observed an initial increase in the local H2O2 concentration of approximately 12 ± 5 µM above S. gordonii, followed by a gradual decrease in H2O2 concentration (>30 min) to almost zero as lactate was produced, and a subsequent decrease in pH with a more pronounced metabolic output of S. mutans. These results were supported by gene expression and confocal fluorescence microscopic studies. Our findings illustrate that H2O2-producing S. gordonii is dominant while the buffering capacity of saliva is valid (∼pH 6.0) but is gradually taken over by S. mutans as the latter species slowly starts decreasing the local pH to 5.0 or less by producing lactic acid. Our observations demonstrate the unique capability of our SECM chemical probes for studying real-time metabolic interactions between two bacterial species, which would not otherwise be achievable in traditional assays.