Bilateral Digitally Aided Tooth Autotransplantation: A 2-Year Case Report.

Tooth autotransplantation is an effective treatment to replace missing teeth. Digital planning can facilitate successful autotransplantation. Guiding templates are highly recommended when performing cases in healed ridges in the posterior area to reduce excessive bone loss and increase the chances of fitting the donor tooth in the new socket. This case report highlights the use of 3D planning tools and fully guided drilling templates for successful tooth autotransplantation in the posterior area. Two tooth autotransplantations were performed in a 51-year-old patient using mandibular third molars to replace hopeless mandibular first and second molars. Root canal treatments were carried out before the surgeries, and different alveoloplasty techniques were used in each recipient area. The prosthetic phase was carried out after 9 months. Both teeth were asymptomatic, functional, and exhibited no signs of resorption or apical radiolucency and showed complete regeneration of the periodontal apparatus at the 2-year follow-up.

Effect of 3D printed replicas on the duration of third molar autotransplantation surgery: A controlled clinical trial.

BACKGROUND/AIM: This study aimed to develop a protocol that combines cone-beam computed tomography (CBCT), software, and 3D printing to design 3D replicas for tooth autotransplantation. The goal was to evaluate the impact of this approach on the extraoral time of the donor teeth and the total surgical time, thereby enhancing surgical efficiency and outcomes. MATERIALS AND METHODS: A non-randomized trial (protocol 10.1186/ISRCTN13563091) was conducted at Riga Stradins University, enrolling 46 patients (13-22 years old) who required molar extraction and possessed a non-erupted third molar. The patients were sequentially assigned to a 3D replica group (24 patients) or a control group (22 patients). The primary outcome measured was the extra-alveolar time of the donor tooth, and the secondary outcome was the total duration of surgery. Both were assessed using a sample size capable of detecting a 10-min difference. A generalized linear model adjusted for various factors was used to test for significant time differences (p < .05) between the groups. RESULTS: Forty-six patients were included in this analysis. The effect of using 3D replicas was not statistically significant and was associated with a decrease in the extraoral time of the donor tooth in seconds (ß = -9.35, 95% CI [-40.86, 22.16]). For the total surgical time in minutes, the use of 3D replicas had a statistically significant impact, reducing the operation duration in minutes (ß = -13.42, 95% CI [-24.50, -2.34]). No early complications were observed in either group, with all teeth present at 3-4 weeks post-surgery. CONCLUSIONS: The integration of 3D printing technology can enhance the efficiency of autotransplantation surgeries, primarily by reducing surgical time.

New complementary alternatives in third molar autotransplantation: A systematic review.

BACKGROUND: Dental autotransplantation (DAT) is defined as the replacement or direct transfer of an impacted, semi-impacted or erupted tooth to a donor site, either to a post-extraction socket or to a surgically created socket within the same individual. The use of new technological advances, such as 3-D dental models based on computer-aided design, among others, have been reported to improve the success rate of DAT. Therefore, we aimed to perform a systematic review to explore the possible benefits that the use of these innovative techniques can provide when applied to DAT. MATERIAL AND METHODS: The literature search was conducted in PubMed, Scopus, and Web of Science databases following the PRISMA guidelines. The research question was: "Are computerized technological advancements a useful tool for improving the success of third molar autotransplantation technique? RESULTS: The initial literature search identified 195 articles, of which only 11 were included for qualitative analysis. All studies used 3D dental models based on computer-aided design data. Surgical guides and stereolithographic models were used by 4 and 1 study respectively. A total of 91 transplanted teeth were evaluated, out of which only 88 were considered within the parameters of clinical success (96.7%). Only 7 out of the 11 articles reported the specific autotransplanted tooth, being mandibular third molars the most prevalent autotransplanted teeth. CONCLUSIONS: Although the application of new technologies for DAT increases the success rate of this technique, further primary studies are still needed to address long-term teeth survival rates and complications. The cost and availability to implement the integration of these techniques to DAT may be a variable to consider, as this can be a limitation for some patients or for low-income countries.

OUTCOMES OF AUTOTRANSPLANTED THIRD MOLARS WITH COMPLETE ROOT FORMATION: A SYSTEMIC REVIEW AND META-ANALYSIS.

OBJECTIVES: Clear evidence is lacking regarding the outcomes of autogenous tooth transplantation (ATT) of third molars with complete root formation. The current review aims to explore the long-term survival and complication rates. METHODS: A comprehensive search was performed in December 2022 of the PubMed, Scopus, Embase, EBSCO, Ovid, Science Direct, and Web of Science databases. The systematic review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and registered at the International Prospective Register of Systematic Reviews (CRD42022337659). The pooled survival, root resorption, and ankyloses rates were calculated. Subgroup analyses were performed to explore the effects of sample size and 3D techniques. RESULTS: Twelve studies from 5 countries fulfilled the eligibility, with 759 third molars transplanted in 723 patients. Five studies reported 100% survival at 1-year follow-up. After excluding these 5 studies, the pooled survival rate was 93.62% at 1 year. The survival rate of 1 large sample study was significantly higher than that of small ones at 5 years. The complications of studies using 3D techniques were: root resorption 2.06% (95% CI: 0.22, 7.50) and ankyloses 2.81% (95% CI: 0.16, 12.22), compared to those without 3D techniques: root resorption 10.18% (95% CI: 4.50, 17.80) and ankyloses 6.49% (95% CI: 3.45, 10.96). CONCLUSIONS: ATT of third molars with complete root formation is a reliable alternative for replacement of a missing tooth and has a promising survival rate. The use of 3D techniques can reduce complication rates and improve long-term survival.

Autotransplantation of Maxillary Third Molar with Its Attached Buccal Cortical Plate Combined with a Connective Tissue Graft.

INTRODUCTION: Tooth replacement often leads to insufficient vertical volume in the recipient socket bone. The aim of this novel report is to present a successful fully guided autotransplantation of a maxillary right third molar (tooth #1) with its attached buccal plate. The procedure was combined with a palatal connective tissue graft to reconstruct a buccal hard and soft tissue defect of an irreparable maxillary right first molar (tooth #3). METHODS: A 45-year-old man complaining of pain in tooth #3 came to the clinic. Tooth #3 was non-restorable due to an extensive caries and a vertical root fracture of the mesiobuccal root, leading to a total loss of the buccal cortical plate. Guided autotransplantation of tooth #1 was completed by using 3-dimensional surgical templates for implant burs and a 3-dimensional-printed replica. After positioning the donor tooth, the cortical plate was fixed to the recipient socket with osteosynthesis screws. A connective tissue graft was also harvested to increase the band of keratinized gingiva and the thickness of the buccal soft tissue. At 6-month follow-up, the screws were removed, showing excellent regeneration throughout the buccal area. RESULTS: At 3-year follow-up, the transplanted tooth was asymptomatic, with a natural bone level and no signs of replacement or inflammatory root resorption. CONCLUSIONS: The use of a donor tooth and its attached bone cortical plate combined simultaneously with a connective tissue graft appears to improve hard and soft tissues in a single procedure.

Tooth Germ Autotransplantation With 24 Months of Follow-up: A Case Report.

The autotransplantation of a third molar represents an alternative treatment solution for filling an edentulous space that may exist because of traumatic avulsion, agenesis, large carious processes, or other reasons, particularly in young patients. Autotransplantation can offer many benefits, including maintenance of a normally functioning periodontium, preservation of pulp vitality, and completion of root formation. This case report describes a successful autotransplantation of an open-apex maxillary third molar germ to replace a hopeless mandibular first molar in a growing patient. After 24 months of follow-up, the donor tooth showed physiological mobility, absence of infection and ankylosis, positive pulp vitality, and fully formed periodontal integration. Radiographic examination confirmed a remarkable radicular edification.

Autotrasplante de un tercer molar superior para reposición de un primer molar superior: a propósito de un caso clínico / Autotransplant of an upper third molar to replace a first molar: a clinical case

Introducción: el desarrollo de los implantes dentales ha hecho que los autotrasplantes se realicen con menor frecuencia, pese a sus altas tasas de éxito y desuponer una alternativa terapéutica quepermite la realización de rehabilitacionesnaturales, funcionales y estéticas.Caso clínico: se presenta el caso de unvarón de 28 años, que acudió a consulta por la presencia de unos restos radiculares en localización de primer molarsuperior izquierdo. Se realizó un autotrasplante dental, siendo el diente donanteel tercer molar superior izquierdo, quese trasplantó al alveolo del primer molar,mostrando buena evolución clínica y radiográfi ca.Discusión: existen diferentes alternativas terapéuticas para reponer los dientesausentes, dentro de las cuáles se encuentran los autotrasplantes, con altas tasasde éxito en dientes con ápices abiertos ycerrados. Los dientes más frecuentemente trasplantados son los terceros molares,como se muestra en el presente caso clínico, sugiriéndose como una opción más,que deben tener en cuenta profesionalesy pacientes.Conclusiones: aunque los autotrasplantes tienen indicaciones más limitadas, suponen un menor coste para los pacientes,y una restauración más simple para elprofesional. Además, sufren micromovimientos, consiguiendo una armonía oclusal en relación a los dientes adyacentes,presentando una alta tasa de éxito (AU)

Introduction: dental autotransplants arenot performed frequently due to dentalimplant development, although theiracceptable success rates, and being atherapeutic option which allows natural,functional and aesthetic restorations.Clinical case: a clinical case of a 28-yearold man is presented, who went todental clinic for removal of left fi rst molarroots. An autotransplant was performedusing left third molar as donor tooth,which was transplanted into fi rst molaralveolus, showing promising clinical andradiographic evolution.Discussion: there are different therapeuticalternatives to restore missing teeth,being one of them dental autotransplants,with acceptable success rates in teethwith both opened and closed apexes.Third molars are the most frequentlytooth being transplanted, as shown in thisclinical case, being suggested as anotheroption, important for professionals andpatients.Conclusion: althouth autotransplants´indications are more limited, they aremore economical, and are simpler tobe restored. Besides, they suffer micromovements, having an occlusal harmonyin relation to adjacent teeth, with highsuccess rates(AU)

Surgical placement of third molars to replace other teeth: "spare wheels" / Mise en place chirurgicale des dents de sagesse en remplacement d'autres dents : « les roues de secours ¼

Introduction: The prognostic improvement for dental auto-transplants is the result of a better understanding in the physiopathology of the periodontium and also of the refining of the technical operative procedure. This fact allows the use of third molars as donor site for the replacement of absent, or first or second badly decayed molars. Discussion: This possible therapy is a supplement argument for the conservation of third molars and their extraction must be indicated only when the anatomic situation presents a pathological risk. Results: If, in adults, it is possible to compare the advantages and disadvantages with the classical implant or prosthetic techniques, it should however be considered as first choice therapy for adolescents and young adults. Indeed, in these cases, the lower risk of root ankylosis avoids passive intrusion and the osteogenic effect of the desmodontium allows normal alveolar bone formation.

Introduction: L'amélioration du pronostic des autogreffes dentaires, envisageable par une meilleure compréhension de la physiopathologie du parodonte et par un affinement de la technique opératoire qui en résulte, permet d'utiliser à bon compte les dents de sagesse comme site donneur dans le remplacement de molaires absentes ou trop fortement délabrées. Discussion: Cette possibilité thérapeutique est un argument supplémentaire à la conservation des dents de sagesse dont l'extraction ne devrait être indiquée que lorsque la situation anatomique de ces dents présente un risque pathologique. Résultats: Si, chez l'adulte, il est possible d'en discuter les avantages et les inconvénients avec les techniques prothétiques et implantaires classiques, les autogreffes dentaires doivent en revanche être considérées comme la solution de choix chez l'adolescent ou le jeune adulte. En effet, dans ces cas, le risque moindre d'ankylose radiculaire évite l'ingression passive de la dent remplacée et l'action ostéogénique de son desmodonte permet une formation normale de l'os alvéolaire qui l'environne.

Autotrasplante Digital: Reporte de Caso Clínico / Digital Autotransplantation: Clinical Case Report

El trasplante dentario autólogo se define como el po-sicionamiento de una pieza dentaria autóloga en un alvéolo post extracción o en un lecho formado qui-rúrgicamente. Actualmente, siguiendo los criterios de selección adecuados y una técnica quirúrgica mi-nuciosa, resulta una alternativa terapéutica ideal en ciertos pacientes. La gran variabilidad de implantes dentales y alternativas de injertos óseos han resuelto el problema de sustituir una pieza dentaria perdida. En los pacientes en crecimiento o con potencial de crecimiento residual del proceso alveolar, se pone en evidencia el inconveniente que puede representar la colocación de implantes, lo que hace necesario ree-valuar la conservación de dientes y la utilización de técnicas quirúrgicas clásicas. Las tasas de éxito de los autotrasplantes autólogos han aumentado con el tiempo, alcanzando cifras mayores al 90%. En el pre-sente artículo se reporta un caso clínico de autotras-plante dentario con planificación digital y una réplica tridimensional de la pieza a trasplantar (AU)

Autologous tooth transplantation is defined as the positioning of an autologous tooth in a post-extraction socket or in a surgically formed bed. Currently, following the appropriate selection criteria and a meticulous surgical technique, it is an ideal therapeutic alternative in certain patients. The great variability of dental implants and bone graft alternatives have solved the problem of replacing a lost tooth. In growing patients or with potential for residual growth of the alveolar process, the inconvenience that implant placement can represent is evident, which makes it necessary to reevaluate tooth conservation and the use of classic surgical techniques. The success rates of autologous autologous transplants have increased over time, reaching figures greater than 90%. This article reports a clinical case of dental autotransplantation with digital planning and a three-dimensional replica of the piece to be transplanted (AU)

Autotrasplante de un 3.8 incluido, en el lecho de un 3.7 con reabsorción radicular: a propósito de un caso / Autotransplantation of a 3.8, instead of a 3.7 with root resorption: a case report

INTRODUCCIÓN: El autotrasplante es una opción predecible para sustituir dientes no restaurables. El presente caso clínico describe el autotrasplante de un tercer molar inferior (3.8) en lugar de un segundo molar inferior (3.7).Caso clínico: Paciente varón de 22 años de edad que acude a una revisión general. A la exploración radiográfica, se observa reabsorción radicular del 3.7, producida por el 3.8 incluido. Se valoró el caso mediante un CBCT confirmando la inviabilidad del 3.7 y una correcta anatomía para la sustitución del 3.8. Después de valorar junto al paciente, las diferentes opciones de tratamiento posibles, se decide realizar el autotrasplante del diente 3.8, en el lugar del 3.7. Se realizó la exodoncia de ambos dientes, realizando el tratamiento de conductos extraoralmente del diente donante, bajo magnificación, y en un tiempo inferior a 20 minutos. Posteriormente se coloca una ferulización semirrígida a los dientes ad-yacentes durante 2 meses. Después del tratamiento quirúrgico/endodóntico, en el control a los 6 meses debido a la buena evo-lución clínica y la ausencia de sintomatología se realiza el trata-miento rehabilitador del diente autotrasplantado. CONCLUSIÓN: Las ventajas del autotrasplante quedan demostradas con los altos porcentajes de éxito que se obtienen al elegir esta opción de tratamiento. Es fundamental el uso del CBCT, tanto para la planificación, como para los posteriores controles radiográficos

INTRODUCTION: Autotransplantation is a predictable option to replace non restaurable teeth. This clinical case describes the autotransplantation of a lower third molar instead of a lower second molar. Clinical case: A 22 years-old male patient came to the clinic. On radiographic examination, it was observed root resorption of the lower second molar (3.7), produced by an included lower third molar (3.8). After checking with the patient all possible treatments, we decided to perform an autotransplant of tooth 3.8, instead of 3.7. Extraction of both teeth was necessary, performing the extraoral root canal treatment of the donor tooth, under magnification, and in less than 20 minutes. After that, a semi-rigid splint was placed to the adjacent teeth for 2 months. After the surgical / endodontic treatment, in the 6-month follow-up due to the good clinical evolution and the absence of symptoms, autotransplanted molar prosthetic rehabilitation treatment takes place. CONCLUSION: The advantages of autotransplantation are demonstrated by the high success rates that we obtain when choosing this treatment option. The use of CBCT is essential both for planning and for subsequent radiographic controls

Autotransplantation of teeth as an alternative to dental implantation.

Autotransplantation of teeth is a considerable option for tooth replacement in adults who are to undergo orthodontic treatment. Being compared with dental implantation, this procedure is more preferable as a grafted tooth functions as a normal one. In this case report, we describe successful autotransplantation of the third molar with complete root formation. To provide better adaptation of the donor tooth, we used its preoperatively printed replica. The donor tooth was immediately placed to the recipient site and splinted for 28 days. Endodontic treatment was initiated 2 weeks after transplantation. Clinical and radiographic findings at 6 and 12 months of follow-up are compared with the results described in the literature.

Technology at the service of surgery in a new technique of autotransplantation by guided surgery: a case report.

BACKGROUND: The aim of this case report was to use a surgical technique for autotransplantation of tooth using virtually planned 3D printed surgical templates for guided osteotomy preparation of the recipient of donor tooth. CASE PRESENTATION: An 18-year-old male patient received autotransplantation of the right mandibular third molar to replace an included right second molar. This procedure was based on guided implant surgery methods by superimposition of DICOM files and 3D data sets of the jaws. In order to design a 3D-printed template with the aid of a fully digital workflow; the third molar was conserved in PRGF during the surgical procedure and the tooth socket was prepared with a template and the help of a 3D-printed donor tooth copy in order to prevent iatrogenic damage to the donor tooth. This template and replica were manufactured using 3D-printing techniques. The transplanted tooth was placed in infra-occlusion and fixed with a suture splint and root canal therapy was performed 15 days later. The intervention was be accomplished by performing preplanned virtual transplantations with guided osteotomies to ensure accurate donor tooth placement in the new recipient site. The 24 months follow-up showed physiological clinical and radiologic results compatible with healing periradicular tissues. CONCLUSIONS: This approach enables the planning and production of a 3D printed surgical template using the latest diagnostic methods and techniques of guided implant surgery. These accurate virtually predesigned surgical templates and printed analogues of the donor tooth could facilitate autotransplantation, ensuring an atraumatic surgical protocol.

Autotransplantation of mature impacted tooth to a fresh molar socket using a 3D replica and guided bone regeneration: two years retrospective case series.

BACKGROUND: The aim of this study was to evaluate the clinical outcome of autotransplantation of mature third molars to fresh molar extraction sockets using 3D replicas. METHODS: Ten patients underwent teeth autotransplantation with or without GBR. We observed the mobility, percussion, radiography examination, the probing depth and the masticatory function of the transplanted teeth during 2 years following up, which were transplanted into fresh molar sockets by using 3D replicas, and GBR when it is necessary. RESULTS: The average extra-oral time of donor tooth had been shortened to 1.65 min when used the 3D replica. Some probing depth of the transplanted tooth were deeper than 3 mm at 4 or 5 weeks temporarily. And one patient felt slight sensitive when chewing with soft food at 4 weeks, then disappeared. The clinical examination of the autotransplantation teeth during 1 year follow-up showed no sign of failure. CONCLUSIONS: The tooth autotransplantation using 3D replica with or without GBR is an effective method which can reduce the extra-oral time of the donor teeth and may result in less failure.

Effect of cryopreservation of teeth on the structural integrity of dentin.

The autotransplantation of teeth after cryopreservation has become an increasingly viable method for whole tooth replacement. While the immediate success rates are quite high, damage introduced by cryopreservation within the dentin or enamel could be detrimental to the durability of these teeth. OBJECTIVE: to determine whether cryopreservation alters the microstructure of dentin or causes a reduction of its resistance to mechanical failures. METHODS: Third molars were obtained from young donors (18≤age≤30yrs) and subjected to a cryopreservation protocol involving storage for 10days in cryoprotectant solution at -196°C. After treatment, the mid-coronal dentin was characterized in terms of its elastic modulus, strength and fatigue behavior. Scanning electron microscopy and Raman spectroscopy were used to evaluate the microstructure and integrity of collagen after cryopreservation. RESULTS: There was no significant difference in the elastic modulus or flexural strength between dentin from the cryopreserved and non-cryopreserved (control) teeth. However, the cryopreservation treatment caused a significant decrease in the fatigue strength of dentin with respect to the controls, with average reduction of nearly 20%. While there were no differences apparent in the collagen matrix or fracture surfaces between the cryopreserved and control groups, the microstructure of dentin from the cryopreserved teeth exhibited unique features and damage that appear to have caused the decrease in durability. SIGNIFICANCE: Autotransplantation of cryopreserved teeth may be a viable option for whole tooth restorations, but hidden damage within the dentin could render these teeth more susceptible to mechanical failures by fatigue and fracture.

Virtual Simulation of Autotransplantation Using 3-dimensional Printing Prototyping Model and Computer-assisted Design Program.

This case report describes an innovative virtual simulation method using a computer-aided rapid prototyping (CARP) model and a computer-aided design (CAD) program for autotransplantation of an immature third molar.A compromised left mandibular second molar (#18) was extracted and replaced by autotransplantation using an immature left mandibular third molar (#17). In order to minimize the surgical time and injury to the donor tooth, a virtual 3-dimensional (3D) rehearsal surgery was planned. Cone-beam computed tomographic images were taken to fabricate the 3D printing CARP model of the donor tooth and tentative extraction socket. Subsequently, both CARP models were scanned with an intraoral scanner (CEREC Omnicam; Dentsply Sirona, Bensheim, Germany) followed by superimposition and virtual simulation of osteotomy preparation of the recipient alveolus using the CAD analysis program. During the surgery, the extraction socket was precisely prepared according to the predetermined location and dimensions via virtual simulation rehearsal surgery using CAD analysis. The donor tooth was atraumatically transplanted into the prepared socket. The follow-up examination revealed that the root developed with a normal periodontal ligament and lamina dura.Virtual simulation using a 3D printing CARP model and a CAD program could be clinically useful in autotransplantation of an immature third molar by ensuring an atraumatic and predictable surgery.

Dental autologous transplantation: technique optimization of immediate step by step for clinical practice

Dental transplantation is a treatment used to replace a missing tooth with another tooth. It is autogenous when it comes from the same individual. The aim of this article is to discuss the surgical protocol and present a case study to optimize the technique for the general dental practitioner. The first molars are the first permanent teeth to erupt during infancy, they are teeth most commonly lost among the permanent dentition. The third molars are best suited for this treatment, the treatment should be undertaken as soon as possible, as the patient ages there is decrease in the mesenchymal cells. Whenever possible, the pericoronal bag should be preserved in the removal of the tooth germ or tooth formed. We present a case where the tooth was placed in the receiver socket, taking into account the anatomical orientation of its faces, in infra-occlusion. The contention was made by silk and point "X" on the occlusal graft and fixed to the adjacent teeth with light-cured resin. Transplantation is an excellent alternative for treating the loss of one molar, especially in young patients.

Outcome of Autotransplantation of Mature Third Molars Using 3-dimensional-printed Guiding Templates and Donor Tooth Replicas.

Autotransplantation exhibits a number of advantages compared with other treatment options (ie, dental implants or fixed partial prostheses), such as greater resistance to occlusal loading, maintenance of the periodontal ligament and surrounding bone, and the potential for better esthetics. The aim of this study was to determine clinical outcomes for autotransplanted teeth with complete root formation using 3-dimensional-printed guiding templates and tooth replicas. Twenty-seven third molars with completely formed roots were autotransplanted. Each donor tooth and recipient site were examined clinically and radiographically (periapical radiographs). A selective cone-beam computed tomographic scan was taken of each donor tooth and recipient site. The images of the selected donor teeth were segmented and saved as stereolithography files. Similar to virtual planning of dental implants, correct angulation, rotation, and accurate positioning of the donor teeth were predefined using the stereolithography files. According to the virtually defined positions and dimensions of the donor teeth, 3-dimensional guiding templates and donor tooth replicas were printed. All autotransplantations were performed according to 1 treatment protocol and surgical technique. In 22 of the 24 transplanted teeth, no inflammation occurred during the healing period. At 2 years, no pathologic radiolucency or tooth resorption was observed in the 22 donor teeth. The autotransplanted teeth fulfilled the success criteria in 22 cases for a 91.7% success rate. Digital planning could potentially provide an accurate alternative to current autotransplantation techniques.

Autotransplantation: An Alternative to Dental Implants- Case Report With 4-Year Follow-Up.

Autotransplantation can be a viable alternative to dental implant placement for partially edentulous patients when case selection and surgical procedures are performed properly. Moreover, in the event of a failed autotransplantation, implant placement may still be possible. Autotransplantation offers several benefits compared with dental implants, however the surgical procedure is technique sensitive. This case report demonstrates the clinical steps and healing process of an autotransplanted third molar tooth with complete root formation with a 4-year follow-up.

Autotransplantation of mature and immature third molars in 23 Chinese patients: a clinical and radiological follow-up study.

BACKGROUND: We investigated the clinical and radiographic outcomes of autotransplanted teeth over a follow-up period of 2 to 8 years, and summarize the findings of other relevant studies with regard to the primary factors that influence a good prognosis in such patients. METHODS: Twenty-three patients (6 men, 17 women) who attended Tanggu Stomatological Hospital, Tianjin, China, from 2008 through 2013, were included in the study. These patients presented with a variety of dental problems, including tooth loss, residual crowns, missing first or second molars, dental trauma, tooth fracture, and unrestored teeth. A total of 26 third molars, including 2 immature molars, were autotransplanted in these patients. The success rate of autotransplantation was assessed on the basis of clinical and radiographic outcomes after follow-up periods ranging from 2 to 8 years. RESULTS: Clinical examination revealed stability of all 26 transplanted teeth, with satisfactory masticatory function and no patient discomfort. Radiographic examination revealed normal periapical tissues and an intact lamina dura surrounding the tooth root, indicating adequate healing of periodontal tissues. CONCLUSIONS: Autotransplantation achieved good results in the Chinese sample population investigated, and was associated with an excellent prognosis. Rigorous case selection, adequate protection of the periodontal ligament, and proper oral hygiene contribute significantly to the long-term success of the procedure.