The construction of ofloxacin detection in fish matrix based on a shark-derived single-domain antibody.

BACKGROUND: Due to the serious issue of ofloxacin (OFL) abuse, there is an increasingly urgent need for accurate and rapid detection of OFL. Immunoassay has become the "golden method" for detecting OFL in complex matrix beneficial to its applicability for a large-scale screening, rapidity, and simplicity. However, traditional antibodies used in immunoassay present challenges such as time-consuming preparation, unstable sensitivity and specificity, and difficulty in directional evolution. In this paper, we successfully developed an OFL detection method based on a shark-derived single-domain antibody (ssdAb) to address these issues. RESULTS: Using phage display technology and a heterologous expression system, OFL-specific clones 1O11, 1O13, 1O17, 1O19, 1O21, and 2O26 were successfully isolated and expressed in soluble form. Among all OFL-specific ssdAbs, the 1O17 ssdAb exhibited the highest binding affinity to OFL in a concentration-dependence manner. The limit of detection (IC10) of 1O17 ssdAb was calculated as 0.34 ng/mL with a detection range of 3.40-1315.00 ng/mL, and its cross reactivity with other analogs was calculated to be less than 5.98 %, indicating high specificity and sensitivity. Molecular docking results revealed that 100Trp and 101Arg located in the CDR3 region of 1O17 ssdAb were crucial for OFL binding. In fish matrix performance tests, the 1O17 ssdAb did not demonstrate severe matrix interference in OFL-negative fish matrix, achieving satisfactory recovery rates ranging from 83.04 % to 108.82 % with high reproducibility. SIGNIFICANCE: This research provides a new and efficient OFL detection recognition element with significant potential in immunoassay applications, broadening the application scenarios of ssdAbs. It offers valuable insights into the structure-activity relationship between ssdAbs and small molecules, laying a theoretical foundation for the further directional modification and maturation of ssdAbs in subsequent applications.

Efficacy and tolerability of a 4-month ofloxacin-containing regimen compared to a 6-month regimen in the treatment of patients with superficial lymph node tuberculosis: a randomized trial.

BACKGROUND: Tuberculosis (TB) lymphadenitis is the most common form of extra-pulmonary TB, and the treatment duration is six months. This non-inferiority based randomized clinical trial in South India evaluated the efficacy and safety of a four-month ofloxacin containing regimen in tuberculosis lymphadenitis (TBL) patients. METHODS: New, adult, HIV-negative, microbiologically and or histopathologically confirmed superficial lymph node TB patients were randomized to either four-month oflaxacin containing test regimen [ofloxacin (O), isoniazid (H), rifampicin (R), pyrazinamide (Z) -2RHZO daily/ 2RHO thrice-weekly] or a six-month thrice-weekly control regimen (2HRZ, ethambutol/4RH). The treatment was directly observed. Clinical progress was monitored monthly during and up to 12 months post-treatment, and thereafter every three months up to 24 months. The primary outcome was determined by response at the end of treatment and TB recurrence during the 24 months post-treatment. RESULTS: Of the 302 patients randomized, 298 (98.7%) were eligible for modified intention-to-treat (ITT) analysis and 294 (97%) for per-protocol (PP) analysis. The TB recurrence-free favourable response in the PP analysis was 94.0% (95% CI: 90.1-97.8) and 94.5% (95% CI: 90.8-98.2) in the test and control regimen respectively, while in the ITT analysis, it was 92.7% and 93.2%. The TB recurrence-free favourable response in the test regimen was non-inferior to the control regimen 0.5% (95% CI: -4.8-5.9) in the PP analysis based on the 6% non-inferiority margin. Treatment was modified for drug toxicity in two patients in the test regimen, while one patient had a paradoxical reaction. CONCLUSION: The 4-month ofloxacin containing regimen was found to be non-inferior and as safe as the 6-month thrice-weekly control regimen.

A novel ratiometric electrochemical sensing platform combined with molecularly imprinted polymer and Fe-MOF-NH2/CNTs-NH2/MXene composite for efficient detection of ofloxacin.

BACKGROUND: Ofloxacin (OFL) is often abused in medicine and animal husbandry, which poses a great threat to human health and ecological environment. Therefore, it is necessary to establish efficient method to detect OFL. Electrochemical sensor has attracted widespread attention due to the advantages of low cost and fast response. However, most electrochemical sensors usually use one response signal to detect the target, which makes it sensitive to the variable background noise in the complex environment, resulting in low robustness and selectivity. The ratio detection mode and employing molecularly imprinted polymer (MIP) are two strategies to solve these problems. RESULTS: A novel molecular imprinting polymer-ratiometric electrochemical sensor (MIP-RECS) based on Fe-MOF-NH2/CNTs-NH2/MXene composite was prepared for the rapid and sensitive detection of OFL. The positively charged Fe-MOF-NH2 and CNTs-NH2 as interlayer spacers were introduced into the negatively charged MXene through a simple electrostatic self-assembly technique, which effectively prevented the agglomeration of MXene and increased the electrocatalytic activity. A glass carbon electrode was modified by the composite and a MIP film was electropolymerized on it using o-phenylenediamine and ß-cyclodextrin as bifunctional monomers and OFL as template. Then a MIP-RECS was designed by adding dopamine (DA) into the electrolyte solution as internal reference, and OFL was quantified by the response current ratio of OFL to DA. The current ratio and the concentration of OFL displayed a satisfying linear relationship in the range of 0.1 µM-100 µM, with a limit of detection (LOD) of 13.2 nM. SIGNIFICANCE: Combining molecular imprinting strategy and ratio strategy, the MIP-RECS has impressive selectivity compared with the non-imprinted polymer-RECS, and has better repeatability and reproducibility than non-ratiometric sensor. The MIP-RECS has high sensitivity and accuracy, which was applied for the detection of OFL in four different brands of milk and was verified by HPLC method with satisfactory results.

The resistance of hydrogenotrophic methanogenic microorganisms to ofloxacin in sludge anaerobic digestion process.

Ofloxacin (OFL) is a commonly used antibiotic that can enter wastewater treatment plants and be adsorbed by the sludge, resulting in a high OFL concentration in sludge and affecting the subsequent sludge anaerobic digestion process. However, the micro mechanisms involved in this process have not been thoroughly studied. Therefore, this study focuses on the effect of OFL on the sludge anaerobic digestion of sludge to provide such support. The experimental results showed that the maximal methane yield decreased from 277.7 to 164.7 mL/g VSS with the OFL concentration increased from 0 to 300 mg/L. Additionally, OFL hindered the intermediate biochemical processes of hydrolysis, acidogenesis, acetogenesis, and acetoclastic methanogenesis. However, it promoted hydrogenotrophic methanogenesis process, using H2 as substrate, with the concentration of 300 mg/L OFL was 5.54 fold methane production of that in the control. Further investigation revealed that the negative effect of OFL was likely due to the induction of reactive oxygen species, which led to a decrease in cell activity and interference with the activity of key enzymes. Microbiological analysis revealed that OFL reduced the relative abundance of hydrolysis and acidogenesis bacteria, and Methanosaeta archaea, while increasing the relative abundance of hydrogenotrophic methanogenesis microorganism from 36.54% to 51.48% as the OFL concentration increase from 0 to 300 mg/L.

Combining GC-MS/MS with a LLE-SPE sample pretreatment step to simultaneously analyse enrofloxacin and ofloxacin residues in chicken tissues and pork.

A widely applicable original gas chromatography-tandem mass spectrometry (GC-MS/MS) method was explored to qualitatively and quantitatively measure enrofloxacin and ofloxacin residues in chicken tissues and pork. The experimental samples were processed based on liquid-liquid extraction (LLE) and solid-phase extraction (SPE). Trimethylsilyl diazomethane (TMSD) was chosen to react derivatively with enrofloxacin and ofloxacin. In total, 78.25% âˆ¼ 90.56% enrofloxacin and 78.43% âˆ¼ 91.86% ofloxacin was recovered from the blank fortified samples. The limits of detection (LODs) were 0.7-1.0 µg/kg and 0.1-0.2 µg/kg, respectively. The limits of quantitation (LOQs) were 1.6-1.9 µg/kg and 0.3-0.4 µg/kg, respectively. It was verified that various experimental data met the requirements of the FAO & WHO (2014) for the detection of veterinary drug residues. Real samples obtained from local markets were analysed using the established method, and no residues of enrofloxacin or ofloxacin were detected in the samples.

Photo-transformation of ofloxacin in natural aquatic conditions: Impact of indirect photolysis on the product profile and transformation mechanism.

The natural phototransformation of organic pollutants in the environment depends on several water constituents, including inorganic ions, humic substances, and pH. However, the literature information concerning the influence of various water components on the amount of phototransformation and their impact on the development of various transformation products (TPs) is minimal. This study investigated the phototransformation of ofloxacin (OFL), a fluoroquinolone antibiotic, in the presence of various water components such as cations (K+, Na+, Ca2+, NH4+, Mg2+), anions (NO3-, SO42-, HCO3-, CO32-, PO43-), pH, and humic substances when exposed to natural sunlight. The study reveals that neutral pH levels (0.39374 min⁻1) enhance the phototransformation of OFL in aquatic environments. Carbonate, among anions, shows the highest rate constant (2.89966 min⁻1), significantly influencing OFL phototransformation, while all anions exhibit a notable impact. In aquatic environments, indirect phototransformation of OFL, driven by increased reactive oxygen species, expedites light-induced reactions, potentially enhancing OFL phototransformation. A clear difference was visible in the type of transformation products (TPs) formed during direct and indirect photolysis. The impact of indirect photolysis in the product profile was evaluated by examining the unique properties of TPs in direct and indirect photolysis. The primary transformation products were generated by oxidation and cleavage processes directed towards the ofloxacin piperazinyl, oxazine, and carboxyl groups. The toxicity assessment of TPs derived from OFL revealed that among the 26 identified TPs, TP3 (demethylated product), TP7 and TP8 (decarboxylated products), and TP15 (piperazine ring cleaved product) could potentially have some toxicological effects. These findings suggest that the phototransformation of OFL in the presence of various water components is necessary when assessing this antibiotic's environmental fate.

Mechanisms of hormetic effects of ofloxacin on Chlorella pyrenoidosa under environmental-relevant concentration and long-term exposure.

Antibiotics are frequently detected in surface water and pose potential threats to organisms in aquatic ecosystem such as microalgae. The occurrence of biphasic dose responses raised the possibility of stimulation of microalgal biomass by antibiotics at environmental-relevant concentration and caused potential ecological risk such as algal bloom. However, the underlying mechanisms of low concentration-induced hormetic effects are not well understood. In this study, we evaluated the hormesis of ofloxacin on Chlorella pyrenoidosa under environmental-relevant concentration and long-term exposure. Results showed the hormetic effects of ofloxacin on cell density and carbon fixation rate (RC). The predicted maximum promotion was 17.45 % by 16.84 µg/L and 20.08 % by 15.78 µg/L at 21 d, respectively. The predicted maximum concentration of non-effect on cell density and RC at 21 d was 3.24 mg/L and 1.44 mg/L, respectively. Ofloxacin induced the mobilization of pigments and antioxidant enzymes to deal with oxidative stress. PCA analysis revealed Chl-a/Chl-b could act as a more sensitive biomarker under acute exposure while chlorophyll fluorescence parameters were in favor of monitoring long-term implication. The hormesis in increased secretion of extracellular organic matters was regarded as a defensive mechanism and accelerated indirect photodegradation of ofloxacin. Bioremoval was dominant and related to biomass accumulation in the total dissipation while abiotic removal appeared slight contributions. This study provided new insights into the understanding of hormesis of microalgae induced by antibiotics.

Photocatalytic Degradation of Quinolones by Magnetic MOFs Materials and Mechanism Study.

With the rising incidence of various diseases in China and the constant development of the pharmaceutical industry, there is a growing demand for floxacin-type antibiotics. Due to the large-scale production and high cost of waste treatment, the parent drug and its metabolites constantly enter the water environment through domestic sewage, production wastewater, and other pathways. In recent years, the pollution of the aquatic environment by floxacin has become increasingly serious, making the technology to degrade floxacin in the aquatic environment a research hotspot in the field of environmental science. Metal-organic frameworks (MOFs), as a new type of porous material, have attracted much attention in recent years. In this paper, four photocatalytic materials, MIL-53(Fe), NH2-MIL-53(Fe), MIL-100(Fe), and g-C3N4, were synthesised and applied to the study of the removal of ofloxacin and enrofloxacin. Among them, the MIL-100(Fe) material exhibited the best photocatalytic effect. The degradation efficiency of ofloxacin reached 95.1% after 3 h under visible light, while enrofloxacin was basically completely degraded. The effects of different materials on the visible photocatalytic degradation of the floxacin were investigated. Furthermore, the photocatalytic mechanism of enrofloxacin and ofloxacin was revealed by the use of three trappers (▪O2-, h+, and ▪OH), demonstrating that the role of ▪O2- promoted the degradation effect of the materials under photocatalysis.

Hydrothermal synthesis of Zingiber/ZnO for enhanced photodegradation of ofloxacin antibiotic and reactive red azo dye (RR141).

The examination of photocatalyst powders for the total removal of pollutants from aqueous solutions is a vital research subject within the realm of environmental preservation. The objective of this study is to develop a photocatalyst heterojunction consisting of Zingiber/ZnO-H for the degradation of both the reactive red dye (RR 141) and ofloxacin antibiotic in wastewater. The current investigation outlines the process of synthesising a composite material by combining Zingiber montanum extract with zinc oxide (ZnO) by a hydrothermal method. The synthesis was conducted at a temperature of 180°C for a period of 4 hours. Consequently. The photocatalyst with a constructed heterojunction shown a notable enhancement in its photocatalytic activity as a result of the improved efficiency in charge separation at the interface. The application of economically viable solar energy facilitated the complete eradication of harmful pollutants through the process of detoxification. The removal of impurities occurs by a process that follows a first-order kinetics. Among the pollutants, RR141 demonstrates the greatest rate constant at 0.02 min-1, while ofloxacin has a rate constant of 0.01 min-1. The assessment of the stability of the produced photocatalyst was conducted after undergoing five cycles. This study additionally investigated the influence of sunshine on degradation, uncovering degradation rates of 97% for RR141 and 99% for ofloxacin when exposed to UV Lamp, and degradation rates of 97% for RR141 and 95% for ofloxacin when exposed to Solar Light.

Synthesis of highly luminescent core-shell nanoprobes in a single pot for ofloxacin detection in blood serum and water.

Antibiotics are commonly used as antibacterial medications due to their extensive and potent therapeutic properties. However, the overconsumption of these chemicals leads to their accumulation in the human body via the food chain, amplifying drug resistance and compromising immunity, thus presenting a significant hazard to human health. Antibiotics are classified as organic pollutants. Therefore, it is crucial to conduct research on precise methodologies for detecting antibiotics in many substances, including food, pharmaceutical waste, and biological samples like serum and urine. The methodology described in this research paper introduces an innovative technique for producing nanoparticles using silica as the shell material, iron oxide as the core material, and carbon as the shell dopant. By integrating a carbon-doped silica shell, this substance acquires exceptional fluorescence characteristics and a substantial quantum yield value of 80%. By capitalising on this characteristic of the substance, we have effectively constructed a fluorescent sensor that enables accurate ofloxacin analysis, with a detection limit of 1.3 × 10-6 M and a linear range of concentrations from 0 to 120 × 10-6 M. We also evaluated the potential of CSIONPs for OLF detection in blood serum and tap water analysis. The obtained relative standard deviation values were below 3.5%. The percentage of ofloxacin recovery from blood serum ranged from 95.52% to 103.28%, and from 89.9% to 96.0% from tap water.

CdIn2Se4@chitosan heterojunction nanocomposite with ultrahigh photocatalytic activity under sunlight driven photodegradation of organic pollutants.

This research focused on synthesizing a CdIn2Se4@Ch nanocomposite by doping CdIn2Se4 into chitosan using a photolysis assisted ultrasonic process. The aim was to enhance the photodegradation efficiency of ofloxacin and 2,4-dichlorophenoxyacetic acid under sunlight. The synthesized CdIn2Se4@Ch nanocomposite was investigated via different techniques, including XRD, XPS, FTIR, TEM, DSC, TGA, UV-Vis and PL. The study also investigated the influence of various reaction parameters, including the effects of inorganic and organic ions. The synthesized nanocomposite demonstrated exceptional efficiency, achieving 86 % and 95 % removal rates, with corresponding rate constants of 0.025 and 0.047 min-1. This performance surpasses that of CdIn2Se4 by approximately 1.35 and 2.25 times, respectively. The values of COD were decreased to 78 and 86 % for ofloxacin and 2,4-dichlorophenoxyacetic, while the TOC values decreased to 71 and 84 %, respectively, from their premier values. The improvement in performance is associated with the introduction of CdIn2Se4 into chitosan, resulting in the self-integration of Cd into the catalyst. This creates a localized accumulation point for electrons, enhancing the efficiency of charge separation and further reducing the surface charge of chitosan. Experimental evidence suggests that superoxide and hydroxyl radicals play a significant role in the photodegradation of pollutants. Additionally, the nanocomposite exhibits excellent stability and can be reused up to five times, indicating remarkable stability and reusability of the developed photocatalyst.

Enhanced degradation and removal of ciprofloxacin and ofloxacin through advanced oxidation and adsorption processes using environmentally friendly modified carbon nanotubes.

This study explores the utilization of adsorption and advanced oxidation processes for the degradation of ofloxacin (OFL) and ciprofloxacin (CIP) using a green functionalized carbon nanotube (MWCNT-OH/COOH-E) as adsorbent and catalyst material. The stability and catalytic activity of the solid material were proved by FT-IR and TG/DTG, which also helped to elucidate the reaction mechanisms. In adsorption kinetic studies, both antibiotics showed similar behavior, with an equilibrium at 30 min and 60% removal. The adsorption kinetic data of both antibiotics were well described by the pseudo-first-order (PFO) model. Different advanced oxidation processes (AOPs) were used, and the photolytic degradation was not satisfactory, whereas heterogeneous photocatalysis showed high degradation (⁓ 70%), both processes with 30 min of reaction. Nevertheless, ozonation and catalytic ozonation have resulted in the highest efficiencies, 90%, and 70%, respectively, after 30-min reaction. For AOP data modeling, the first-order model better described CIP and OFL in photocatalytic and ozonation process. Intermediates were detected by MS-MS analysis, such as P313, P330, and P277 for ciprofloxacin and P391 and P332 for ofloxacin. The toxicity test demonstrated that a lower acute toxicity was observed for the photocatalysis method samples, with only 3.1 and 1.5 TU for CIP and OFL, respectively, thus being a promising method for its degradation, due to its lower risk of inducing the proliferation of bacterial resistance in an aquatic environment. Ultimately, the analysis of MWCNT reusability showed good performance for 2 cycles and regeneration of MWCNT with ozone confirmed its effectiveness up to 3 cycles.

Fate and removal of fluoroquinolone antibiotics in mesocosmic wetlands: Impact on wetland performance, resistance genes and microbial communities.

The fate of fluoroquinolone antibiotics norfloxacin and ofloxacin were investigated in mesocosmic wetlands, along with their effects on nutrients removal, antibiotic resistance genes (ARGs) and epiphytic microbial communities on Hydrilla verticillate using bionic plants as control groups. Approximately 99% of norfloxacin and ofloxacin were removed from overlaying water, and H. verticillate inhibited fluoroquinolones accumulation in surface sediments compared to bionic plants. Partial least squares path modeling showed that antibiotics significantly inhibited the nutrient removal capacity (0.55) but had no direct effect on plant physiology. Ofloxacin impaired wetland performance more strongly than norfloxacin and more impacted the primary microbial phyla, whereas substrates played the most decisive role on microbial diversities. High antibiotics concentration shifted the most dominant phyla from Proteobacteria to Bacteroidetes and inhibited the Xenobiotics biodegradation function, contributing to the aggravation in wetland performance. Dechloromonas and Pseudomonas were regarded as the key microorganisms for antibiotics degradation. Co-occurrence network analysis excavated that microorganisms degrade antibiotics mainly through co-metabolism, and more complexity and facilitation/reciprocity between microbes attached to submerged plants compared to bionic plants. Furthermore, environmental factors influenced ARGs mainly by altering the community dynamics of differential bacteria. This study offers new insights into antibiotic removal and regulation of ARGs accumulation in wetlands with submerged macrophyte.

Microbiome and Otic Quinolone Levels Following Tympanoplasty Assessed by Gelatin Sponge Analysis.

OBJECTIVE: To determine if absorbable gelatin sponge (AGS) can be used to assess the posttympanoplasty microbiome and otic antibiotic exposure. STUDY DESIGN: Prospective. SETTING: Tertiary hospital. METHODS: Patients undergoing tympanoplasty were prospectively enrolled. Intraoperatively, AGS was applied to the medial ear canal/tympanic membrane (TM) for 1 minute after canal incision, then saved for analysis. Ear canals were packed with AGS at the end of surgery. Otic ofloxacin was administered until the first postoperative visit, when AGS was collected. Microbial presence was assessed by culture. Ofloxacin levels were assessed by liquid-chromatography mass-spectrometry. RESULTS: Fifty-three patients were included. AGS was collected in 92.9% of patients seen within 21 days compared to 70.8% of those seen at 22 to 35 days. At surgery, AGS yielded bacteria and fungi in 81% and 11%, respectively, including Staphylococcus species (55%) and Pseudomonas species (25%). Postoperatively, AGS yielded bacteria in 71% and fungi in 21% at the meatus, (staphylococci 57% and pseudomonas 25%). TM samples yielded bacteria in 69%, fungi in 6%, staphylococci in 53%, and pseudomonas in 19%. Ofloxacin concentration at the meatus was 248 µg/mL (95% confidence interval [CI]: 119-377) and at the TM was 126 µg/mL (95% CI: 58-194). Ofloxacin-resistant colonies were found in 75% of patients. CONCLUSION: Analysis of AGS is a viable technique for noninvasively studying healing metrics posttympanoplasty, including the microbiome and otic antibiotic exposure. Despite exposure to a high concentration of quinolones, the tympanoplasty wound is far from sterile, which may impact healing outcomes.

Comparison of the in vitro activities of delafloxacin and comparators against Staphylococcus epidermidis clinical strains involved in osteoarticular infections: a CRIOGO multicentre retrospective study.

OBJECTIVES: Staphylococcus epidermidis bone and joint infections (BJIs) on material are often difficult to treat. The activity of delafloxacin has not yet been studied on S. epidermidis in this context. The aim of this study was to assess its in vitro activity compared with other fluoroquinolones, against a large collection of S. epidermidis clinical strains. METHODS: We selected 538 S. epidermidis strains isolated between January 2015 and February 2023 from six French teaching hospitals. One hundred and fifty-two strains were ofloxacin susceptible and 386 were ofloxacin resistant. Identifications were performed by MS and MICs were determined using gradient concentration strips for ofloxacin, levofloxacin, moxifloxacin and delafloxacin. RESULTS: Ofloxacin-susceptible strains were susceptible to all fluoroquinolones. Resistant strains had higher MICs of all fluoroquinolones. Strains resistant to ofloxacin (89.1%) still showed susceptibility to delafloxacin when using the Staphylococcus aureus 2021 CA-SFM/EUCAST threshold of 0.25 mg/L. In contrast, only 3.9% of the ofloxacin-resistant strains remained susceptible to delafloxacin with the 0.016 mg/L S. aureus breakpoint according to CA-SFM/EUCAST guidelines in 2022. The MIC50 was 0.094 mg/L and the MIC90 was 0.38 mg/L. CONCLUSIONS: We showed low delafloxacin MICs for ofloxacin-susceptible S. epidermidis strains and a double population for ofloxacin-resistant strains. Despite the absence of breakpoints for S. epidermidis, delafloxacin may be an option for the treatment of complex BJI, including strains with MICs of ≤0.094 mg/L, leading to 64% susceptibility. This study underlines the importance for determining specific S. epidermidis delafloxacin breakpoints for the management of BJI on material.

Simultaneous identification and enantioseparation of ofloxacin and duloxetine without the single standard and computational calculation of their inclusion complexes.

Given the markedly different pharmacological activities between enantiomeric isomers, it is crucial to encourage the stereoselective determination of chiral drugs in the biological and pharmaceutical fields, and the combination of drugs makes this analysis more complicated and challenging. Herein, a capillary electrophoresis (CE) method for the enantioseparation of ofloxacin and duloxetine was established, enabling the simultaneous identification of four isomers in nonracemic mixtures with enantiomeric excess (ee%) values exceeding 5%. This was achieved through the integration of theoretical simulation and electron circular dichroism (ECD), all without reliance on individual standards. Molecular modeling explained and verified the migration time differences of these isomers in electrophoretic separation. Moreover, the correlation coefficients (R2 ) between the enantiomeric peak area differentials and ee% were both above 0.99. Recovery rates were quantified using bovine serum as the matrix, with results ranging from 93.32% to 101.03% (RSD = 0.030) and 92.69% to 100.52% (RSD = 0.028) for these two chiral drugs at an ee value of 23.1%, respectively.

One-step online analysis of antibiotics in highly saline seawater by nano-based slug-flow microextraction.

The transition to mass spectrometry (MS) in the analysis of antibiotics in the marine environment is highly desirable, particularly in the enhancement of sensitivity for high-salinity (3.5 wt%) seawater samples. However, the persistence of complex operational procedures poses substantial challenges to this transition. In this study, a rapid method for the online analysis of antibiotics in seawater samples via nano-electrospray ionization (nESI) MS based on slug-flow microextraction (SFME) has been proposed. Comparisons with other methods, complex laboratory setups for sample processing are now seamlessly integrated into a single online step, completing the entire process, including desalination and detection, SFME-nESI-MS provides faster results in less than 2 min while maintaining sensitivity comparable to that of other detection methods. Using SFME-nESI, six antibiotics in high-salinity (3.5 wt%) seawater samples have been determined in both positive and negative ion modes. The proposed method successfully detected clarithromycin, ofloxacin, and sulfadimidine in seawater within a linear range of 1-1000 ng mL-1 and limit of detection (LOD) of 0.23, 0.06, and 0.28 ng mL-1, respectively. The method recovery was from 92.8% to 107.3%, and the relative standard deviation was less than 7.5%. In addition, the response intensity of SFME-nESI-treated high-salinity (3.5 wt%) samples surpassed that of untreated medium-salinity (0.35 wt%) samples by two to five orders of magnitude. This advancement provides an exceptionally simplified protocol for the online rapid, highly sensitive, and quantitative determination of antibiotics in high-salinity (3.5 wt%) seawater.

Efficient removal of ciprofloxacin and ofloxacin from aqueous solutions using a novel nano-scale adsorbent: Modeling, optimization, and characterization.

In the fascinating realm of water purification, our study unveils the remarkable potential of a cutting-edge nano-scale adsorbent-combining graphene oxide (GO), chitosan (CS), and polydopamine (PDA)-in efficiently remove ciprofloxacin (CPF) and ofloxacin (OFL) from aqueous solutions. Our exploration delves deep into the adsorbent's character, utilizing a range of analytical techniques including SEM, RAMAN, FTIR, TGA, BET, XRD, and Zeta potential analyses provided insights into the adsorbent's properties. Modeling the adsorption process with Response Surface Methodology (RSM), Artificial Neural Network (ANN) and General Regression Neural Network (GRNN) indicated excellent predictions by GRNN, with RMSE = 0.0200 and 0.0166, MAE = 0.0082 and 0.0092, as well as AAD = 0.0002 and 0.0006, highlighting its modeling power. Optimization using genetic algorithm (GA) revealed maximum CPF removal efficiency of approximately 95.20% under pH = 6.3, sonication time = 9.0 min, adsorbent dosage = 2.10 g L⁻1, temperature = 45 °C and initial CPF concentration = 90.0 mg L⁻1. Similarly, OFL removal reached about 95.50% under pH = 6.30, sonication time = 8.0 min, adsorbent dosage = 2.0 g L⁻1, temperature = 45 °C and OFL concentration = 115.0 mg L⁻1. RSM optimization closely aligned with GA results. Pseudo-second-order (PSO) kinetic model and Langmuir isotherm model best fitted the experimental data for both antibiotics. Thermodynamic analysis indicated a favorable and spontaneous adsorption process for CPF and OFL. The study concludes that the proposed adsorbents show effectiveness in removing CPF and OFL at lower doses and shorter sonication times compared to various reported adsorbents.

[Characteristics and Risk Assessment of Antibiotic Contamination in Oujiang River Basin in Southern Zhejiang Province].

Antibiotic pollution in the environment has a negative impact on ecosystem security. Taking the Oujiang River Basin as an example,high-performance liquid chromatography mass spectrometry(LC-MS)was used to detect the concentration of six classes of 35 antibiotics in the surface water of the southern Zhejiang River Basin. The concentration level and spatial distribution of antibiotics were analyzed,the risk of antibiotics to ecology and human health were assessed using relevant models,and the sources of antibiotics were discussed. The results showed that in 20 sampling sites,a total of four classes of 12 antibiotics were detected,including sulfonamides,quinolones,tetracyclines,and lincosamides. The total concentration was ND-1 018 ng·L-1. The highest detection rate was that of Lincomycin(90.48%),followed by that of sulfapyridine(38.10%). The three antibiotics with the highest average concentrations were ofloxacin(12.49 ng·L-1),Lincomycin(11.08 ng·L-1),and difloxacin(7.38 ng·L-1). Antibiotics in the basin showed mainly spotty pollution,which had large spatial differentiation. The average concentration of antibiotics in the upstream(54.39 ng·L-1)was higher than that mid-downstream(46.64 ng·L-1). The degree of antibiotic pollution from upstream to downstream showed a characteristic of being "sparse in the upstream and dense in the downstream. " This indicated that the concentration of antibiotics in the upstream was significantly different,whereas the pollution degree of antibiotics in the downstream was uniform. The upstream was mainly polluted by health,livestock,and poultry breeding wastewater emissions,and downstream pollution was mainly caused by densely populated activities and the rapid development of economy,trade,and industry. The ecological risk assessment results showed that the upstream site H6 had the highest risk quotient,ofloxacin and enrofloxacin had high risk levels, and lincomycin had a moderate risk level. Health risk assessment results showed that the Oujiang River surface water antibiotics posed no risk to human health.

Adsorption, natural attenuation, and microbial community response of ofloxacin and oxolinic acid in marine sediments.

The pollution of quinolone antibiotics in the marine environment has attracted widespread attention, especially for ofloxacin (OFL) and oxolinic acid (OXO) due to their frequent detection. However, few studies have been conducted to assess the behaviors and microbial community response to these antibiotics in marine sediments, particularly for potential antibiotic-resistant bacteria. In this work, the adsorption characteristics, natural attenuation characteristics, and variation of microbial communities of OFL and OXO in marine sediments were investigated. The adsorption process of antibiotics in sediments occurred on the surface and internal pores of organic matter, where OFL was more likely to be transferred from seawater to sediment compared with OXO. Besides, the adsorption of two antibiotics on sediment surfaces was attributed to physisorption (pore filling, electrostatic interaction) and chemisorption (hydrogen bonding). The natural attenuation of OFL and OXO in marine sediment followed second-order reaction kinetics with half-lives of 6.02 and 26.71 days, respectively, wherein biodegradation contributed the most to attenuation, followed by photolysis. Microbial community structure in marine sediments exposure to antibiotics varied by reducing abundance and diversity of microbial communities, as a whole displaying as an increase in the relative abundance of Firmicutes whereas a decrease of Proteobacteria. In detail, Escherichia-Shigella sp., Blautia sp., Bifidobacterium sp., and Bacillus sp. were those antibiotic-resistant bacteria with potential ability to degrade OFL, while Bacillus sp. may be resistant to OXO. Furthermore, functional predictions indicated that the microbial communities in sediment may resist the stress caused by OFL and OXO through cyano-amino acid metabolism, and ascorbate and aldarate metabolism, respectively. The research is key to understanding fate and bacterial resistance of antibiotics in marine sediments.