Designing Oligonucleotide-Based FISH Probe Sets with PaintSHOP.

Fluorescent in situ hybridization (FISH) enables the visualization of the position and abundance of nucleic acid molecules in fixed cell and tissue samples. Many FISH-based methods employ sets of synthetic, computationally designed DNA oligonucleotide (oligo) FISH probes, including massively multiplexed imaging spatial transcriptomics and spatial genomics technologies. Oligo probes can either be designed de novo or accessed from an existing database of pre-discovered probe sequences. This chapter describes the use of PaintSHOP, a user-friendly, web-based platform for the design of sets of oligo-based FISH probes. PaintSHOP hosts large collections of pre-discovered probes from many model organisms and also provides collections of functional sequences such as primers and readout domains and interactive tools to add these functional sequences to selected probes. Detailed examples are provided for three common experimental scenarios.

Tigerfish designs oligonucleotide-based in situ hybridization probes targeting intervals of highly repetitive DNA at the scale of genomes.

Fluorescent in situ hybridization (FISH) is a powerful method for the targeted visualization of nucleic acids in their native contexts. Recent technological advances have leveraged computationally designed oligonucleotide (oligo) probes to interrogate > 100 distinct targets in the same sample, pushing the boundaries of FISH-based assays. However, even in the most highly multiplexed experiments, repetitive DNA regions are typically not included as targets, as the computational design of specific probes against such regions presents significant technical challenges. Consequently, many open questions remain about the organization and function of highly repetitive sequences. Here, we introduce Tigerfish, a software tool for the genome-scale design of oligo probes against repetitive DNA intervals. We showcase Tigerfish by designing a panel of 24 interval-specific repeat probes specific to each of the 24 human chromosomes and imaging this panel on metaphase spreads and in interphase nuclei. Tigerfish extends the powerful toolkit of oligo-based FISH to highly repetitive DNA.

Unraveling Bacterial Single-Stranded Sequence Specificities: Insights from Molecular Dynamics and MMPBSA Analysis of Oligonucleotide Probes.

We utilized molecular dynamics (MD) simulations and Molecular Mechanics Poisson-Boltzmann Surface Area (MMPBSA) free energy calculations to investigate the specificity of two oligonucleotide probes, namely probe B and probe D, in detecting single-stranded DNA (ssDNA) within three bacteria families: Enterobacteriaceae, Pasteurellaceae, and Vibrionaceae. Due to the limited understanding of molecular mechanisms in the previous research, we have extended the discussion to focus specifically on investigating the binding process of bacteria-probe DNA duplexes, with an emphasis on analyzing the binding free energy. The role of electrostatic contributions in the specificity between the oligonucleotide probes and the bacterial ssDNAs was investigated and found to be crucial. Our calculations yielded results that were highly consistent with the experimental data. Through our study, we have successfully exhibited the benefits of utilizing in-silico approaches as a powerful virtual-screening tool, particularly in research areas that demand a thorough comprehension of molecular interactions.

Identification of chromosomes by fluorescence in situ hybridization in Gossypium hirsutum via developing oligonucleotide probes.

Discrimination of chromosome is essential for chromosome manipulation or visual chromosome characterization. Oligonucleotide probes can be employed to simplify the procedures of chromosome identification in molecular cytogenetics due to its simplicity, fastness, cost-effectiveness, and high efficiency. So far, however, visual identification of cotton chromosomes remains unsolved. Here, we developed 16 oligonucleotide probes for rapid and accurate identification of chromosomes in Gossypium hirsutum: 9 probes, of which each is able to distinguish individually one pair of chromosomes, and seven probes, of which each distinguishes multiple pairs of chromosomes. Besides the identification of Chrs. A09 and D09, we first find Chr. D08, which carries both 45S and 5S rDNA sequences. Interestingly, we also find Chr. A07 has a small 45S rDNA size, suggesting that the size of this site on Chr. A07 may have reduced during evolution. By the combination of 45S and 5S rDNA sequences and oligonucleotide probes developed, 10 chromosomes (Chrs. 3-7, and 9-13) in A subgenome and 7 (Chrs. 1-2, 4-5, and 7-9) in D subgenome of cotton are able to be recognized. This study establishes cotton oligonucleotide fluorescence in situ hybridization technology for discrimination of chromosomes, which supports and guides for sequence assembling, particularly, for tandem repeat sequences in cotton.

Bioinformatic Prediction of Bulked Oligonucleotide Probes for FISH Using Chorus2.

Fluorescence in situ hybridization (FISH) provides great conveniences for detection and visualization of specific genomic segments. Oligonucleotide (Oligo)-based FISH further broadened the applications in plant cytogenetics researches. High-specific single-copy oligo probes are essential for successful oligo-FISH experiments. Here, we introduce the bioinformatic pipeline to design genome-scaled single-copy oligos and filter repeat-related probes with Chorus2 software. Robust probes are accessible for both well-assembled genome and species without a reference genome based on this pipeline.

Visualization of Oligonucleotide-Based Probes Along Pseudochromosomes Using RIdeogram, KaryoploteR, and Circlize (Circos).

Fluorescence in situ hybridization (FISH) using oligonucleotide-based probes is an innovative modification of classic FISH techniques, enabling karyotypic identifications. Here, we exemplarily describe the design and in silico visualization of oligonucleotide-based probes derived from the Cucumis sativus genome. Additionally, the probes are also plotted comparatively to the closely related Cucumis melo genome. The visualization process is realized in R using various libraries for linear or circular plots including RIdeogram, KaryoploteR, and Circlize.

Improved enzymatic labeling of fluorescent in situ hybridization probes applied to the visualization of retained introns in cells.

Fluorescence in situ hybridization (FISH) is a widely used tool for quantifying gene expression and determining the location of RNA molecules in cells. We present an improved method for FISH probe production that yields high-purity probes with a wide range of fluorophores using standard laboratory equipment at low cost. The method modifies an earlier protocol that uses terminal deoxynucleotidyl transferase to add fluorescently labeled nucleotides to synthetic deoxyoligonucleotides. In our protocol, amino-11-ddUTP is joined to an oligonucleotide pool prior to its conjugation to a fluorescent dye, thereby generating pools of probes ready for a variety of modifications. This order of reaction steps allows for high labeling efficiencies regardless of the GC content or terminal base of the oligonucleotides. The degree of labeling (DOL) for spectrally distinct fluorophores (Quasar, ATTO, and Alexa dyes) was mostly >90%, comparable with commercial probes. The ease and low cost of production allowed the generation of probe sets targeting a wide variety of RNA molecules. Using these probes, FISH assays in C2C12 cells showed the expected subcellular localization of mRNAs and pre-mRNAs for Polr2a (RNA polymerase II subunit 2a) and Gapdh, and of the long noncoding RNAs Malat1 and Neat1 Developing FISH probe sets for several transcripts containing retained introns, we found that retained introns in the Gabbr1 and Noc2l transcripts are present in subnuclear foci separate from their sites of synthesis and partially coincident with nuclear speckles. This labeling protocol should have many applications in RNA biology.

Mid-Infrared Photothermal-Fluorescence In Situ Hybridization for Functional Analysis and Genetic Identification of Single Cells.

Simultaneous identification and metabolic analysis of microbes with single-cell resolution and high throughput are necessary to answer the question of "who eats what, when, and where" in complex microbial communities. Here, we present a mid-infrared photothermal-fluorescence in situ hybridization (MIP-FISH) platform that enables direct bridging of genotype and phenotype. Through multiple improvements of MIP imaging, the sensitive detection of isotopically labeled compounds incorporated into proteins of individual bacterial cells became possible, while simultaneous detection of FISH labeling with rRNA-targeted probes enabled the identification of the analyzed cells. In proof-of-concept experiments, we showed that the clear spectral red shift in the protein amide I region due to incorporation of 13C atoms originating from 13C-labeled glucose can be exploited by MIP-FISH to discriminate and identify 13C-labeled bacterial cells within a complex human gut microbiome sample. The presented methods open new opportunities for single-cell structure-function analyses for microbiology.

Design, Labeling, and Application of Probes for RNA smFISH.

Visualization of single mRNA molecules in fixed cells can be achieved using single molecule fluorescent in situ hybridization (smFISH). This approach enables accurate quantification of mRNA numbers and localization at a single-cell level. To ensure reliable results using smFISH, it is critical to use fluorescent probes that are highly specific to their RNA target. To facilitate probe design, we have created anglerFISH, a user-friendly command-line based pipeline. In this chapter, we present how to perform a smFISH experiment using user-designed and labeled probes.

Preparation of Labeled DNA, RNA, and Oligonucleotide Probes.

Labeled nucleic acids and oligonucleotides are typically generated by enzymatic methods such as end-labeling, random priming, nick translation, in vitro transcription, and variations of the polymerase chain reaction (PCR). Some of these methods place the label in specific locations within the nucleic acid (e.g., at the 5' or 3' terminus); others generate molecules that are labeled internally at multiple sites. Some methods yield labeled single-stranded products, whereas others generate double-stranded nucleic acids. Finally, some generate probes of defined length, whereas others yield a heterogeneous population of labeled molecules. Options available for generating and detecting labeled nucleic acids, as well as advice on designing oligonucleotides for use as probes, is included here.

Facile design of multifunction-integrated linear oligonucleotide probe with multiplex amplification effect for label-free and highly sensitive GMO biosensing.

Well-defined structures and compositions of nucleic acids afford oligonucleotide probes with unique chemical properties and biological functions for various biosensing applications. Herein, a unique and special oligonucleotide probe, named multifunction-integrated linear oligonucleotide probe (MI-LOP), was facile designed and reported for label-free and turn-on fluorescent detection of the codon component of genetically modified organisms (GMOs). The MI-LOP contains four different functional regions including recognition of target, serving as polymerization template, and creating polymerization primer-linked G-quadruplex (PP-G-quadruplex). Without the aid of any other oligonucleotides, the introduction of target DNA can make each function of the MI-LOP executed one-by-one, during which the species of target DNA, target analogue, and PP-G-quadruplex can be cyclically utilized and in turn induce a multiplex signal amplification responsible for substantial collection of the G-quadruplex moieties under isothermal conditions. The stable G-quadruplexes can combine with N-methyl mesoporphyrin IX (NMM) and function as efficient fluorescence light-up probes, rapidly leading to a dramatic increase in the fluorescence intensity for the amplified detection of the target codon component. Our results strongly demonstrate that the developed MI-LOP with multiplex amplification effect confers the sensing strategy a high sensitivity and specificity for quantitative and qualitative detection of the target codon. And it has also been successfully applied for analyzing target codon in the complex extractions of soybean. The achievements highlight the significance of using oligonucleotide probes as promising analytical tools to promote the basic biochemical research and help in food and environmental analysis.

A Recent Update on Advanced Molecular Diagnostic Techniques for COVID-19 Pandemic: An Overview.

Coronavirus disease 2019 (COVID-19), which started out as an outbreak of pneumonia, has now turned into a pandemic due to its rapid transmission. Besides developing a vaccine, rapid, accurate, and cost-effective diagnosis is essential for monitoring and combating the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its related variants on time with precision and accuracy. Currently, the gold standard for detection of SARS-CoV-2 is Reverse Transcription Polymerase Chain Reaction (RT-PCR), but it lacks accuracy, is time-consuming and cumbersome, and fails to detect multi-variant forms of the virus. Herein, we have summarized conventional diagnostic methods such as Chest-CT (Computed Tomography), RT-PCR, Loop Mediated Isothermal Amplification (LAMP), Reverse Transcription-LAMP (RT-LAMP), as well new modern diagnostics such as CRISPR-Cas-based assays, Surface Enhanced Raman Spectroscopy (SERS), Lateral Flow Assays (LFA), Graphene-Field Effect Transistor (GraFET), electrochemical sensors, immunosensors, antisense oligonucleotides (ASOs)-based assays, and microarrays for SARS-CoV-2 detection. This review will also provide an insight into an ongoing research and the possibility of developing more economical tools to tackle the COVID-19 pandemic.

Monitoring co-cultures of Clostridium carboxidivorans and Clostridium kluyveri by fluorescence in situ hybridization with specific 23S rRNA oligonucleotide probes.

The development of co-cultures of clostridial strains which combine different physiological traits represents a promising strategy to achieve the environmentally friendly production of biofuels and chemicals. For the optimization of such co-cultures it is essential to monitor their composition and stability throughout fermentation. FISH is a quick and sensitive method for the specific labeling and quantification of cells within microbial communities. This technique is neither limited by the anaerobic fermenter environment nor by the need of prior genetic modification of strains. In this study, two specific 23S rRNA oligonucleotide probes, ClosKluy and ClosCarb, were designed for the monitoring of C. kluyveri and C. carboxidivorans, respectively. After the optimization of hybridization conditions for both probes, which was achieved at 30% (v/v) formamide, a high specificity was observed with epifluorescence microscopy using cells from different pure reference strains. The discriminating properties of the ClosKluy and ClosCarb probes was verified with samples from heterotrophic co-cultures in anaerobic flasks as well as autotrophic stirred-tank bioreactor co-cultures of C. kluyveri and C. carboxidivorans. Besides being suited to monitor defined co-cultures of these two species, the new specific FISH oligonucleotide probes for C. kluyveri and C. carboxidivorans additionally have potential to be applied in environmental studies.

Single Copy Oligonucleotide Fluorescence In Situ Hybridization Probe Design Platforms: Development, Application and Evaluation.

Oligonucleotides fluorescence in situ hybridization (Oligo-FISH) is an emerging technology and is an important tool in research areas such as detection of chromosome variation, identification of allopolyploid, and deciphering of three-dimensional (3D) genome structures. Based on the demand for highly efficient oligo probes for oligo-FISH experiments, increasing numbers of tools have been developed for probe design in recent years. Obsolete oligonucleotide design tools have been adapted for oligo-FISH probe design because of their similar considerations. With the development of DNA sequencing and large-scale synthesis, novel tools have been designed to increase the specificity of designed oligo probes and enable genome-scale oligo probe design, which has greatly improved the application of single copy oligo-FISH. Despite this, few studies have introduced the development of the oligo-FISH probe design tools and their application in FISH experiments systematically. Besides, a comprehensive comparison and evaluation is lacking for the available tools. In this review, we provide an overview of the oligo-FISH probe design process, summarize the development and application of the available tools, evaluate several state-of-art tools, and eventually provide guidance for single copy oligo-FISH probe design.

Real-time monitoring of bead-based DNA hybridization in a microfluidic system: study of amplicon hybridization behavior on solid supports.

DNA hybridization phenomena occurring on solid supports are not understood as clearly as aqueous phase hybridizations and mathematical models cannot predict some empirically obtained results. Ongoing research has identified important parameters but remains incomplete to accurately account for all interactions. It has previously been shown that the length of the overhanging (dangling) end of the target DNA strand following hybridization to the capture probe is correlated to interactions with the complementary strand in solution which can result in unbinding of the target and its release from the surface. We have developed an instrument for real-time monitoring of DNA hybridization on spherical particles functionalized with oligonucleotide capture probes and arranged in the form of a tightly packed monolayer bead bed inside a microfluidic cartridge. The instrument is equipped with a pneumatic module to mediate displacement of fluid on the cartridge. We compared this system to both conventional (passive) and centrifugally-driven (active) microfluidic microarray hybridization on glass slides to establish performance levels for the detection of single nucleotide polymorphisms. The system was also used to study the effect of the dangling end's length in real-time when the immobilized target DNA is exposed to the complementary strand in solution. Our findings indicate that increasing the length of the dangling end leads to desorption of target amplicons from bead-bound capture probes at a rate approaching that of the initial hybridization process. Finally, bead bed hybridization was performed with Streptococcus agalactiae cfb gene amplicons obtained from randomized clinical samples, which allowed for identification of group B streptococci within 5-15 min. The methodology presented here is useful for investigating competitive hybridization mechanisms on solid supports and to rapidly validate the suitability of microarray capture probes.

Distribution of FISH oligo-5S rDNA and oligo-(AGGGTTT)3 in Hibiscus mutabilis L.

Hibiscus exhibits high variation in chromosome number both within and among species. The Hibiscus mutabilis L. karyotype was analyzed in detail using fluorescence in situ hybridization (FISH) with oligonucleotide probes for (AG3T3)3 and 5S rDNA, which were tested here for the first time. In total, 90 chromosomes were counted in prometaphase and metaphase, and all exhibited similarly intense (AG3T3)3 signals at both ends. (AG3T3)3 showed little variation and thus did not allow discrimination among H. mutabilis chromosomes, but its location at both ends confirmed the integrity of each chromosome, thus contributing to accurate counting of the numerous, small chromosomes. Oligo-5S rDNA marked the proximal/distal regions of six chromosomes: weak signals on chromosomes 7 and 8, slightly stronger signals on chromosomes 15 and 16, and very strong signals on chromosomes 17 and 18. Therefore, 5S rDNA could assist in chromosome identification in H. mutabilis. Metaphase chromosome lengths ranged from 3.00 to 1.18 µm, indicating small chromosomes. The ratios of longest to shortest chromosome length in prometaphase and metaphase were 2.58 and 2.54, respectively, indicating karyotype asymmetry in H. mutabilis. These results provide an exact chromosome number and a physical map, which will be useful for genome assembly and contribute to molecular cytogenetics in the genus Hibiscus.

Cell engineering method using fluorogenic oligonucleotide signaling probes and flow cytometry.

OBJECTIVE: Chromovert® Technology is presented as a new cell engineering technology to detect and purify living cells based on gene expression. METHODS: The technology utilizes fluorogenic oligonucleotide signaling probes and flow cytometry to detect and isolate individual living cells expressing one or more transfected or endogenously-expressed genes. RESULTS: Results for production of cell lines expressing a diversity of ion channel and membrane proteins are presented, including heteromultimeric epithelial sodium channel (αßγ-ENaC), sodium voltage-gated ion channel 1.7 (NaV1.7-αß1ß2), four unique γ-aminobutyric acid A (GABAA) receptor ion channel subunit combinations α1ß3γ2s, α2ß3γ2s, α3ß3γ2s and α5ß3γ2s, cystic fibrosis conductance regulator (CFTR), CFTR-Δ508 and two G-protein coupled receptors (GPCRs) without reliance on leader sequences and/or chaperones. In addition, three novel plasmid-encoded sequences used to introduce 3' untranslated RNA sequence tags in mRNA expression products and differentially-detectable fluorogenic probes directed to each are described. The tags and corresponding fluorogenic signaling probes streamline the process by enabling the multiplexed detection and isolation of cells expressing one or more genes without the need for gene-specific probes. CONCLUSIONS: Chromovert technology is provided as a research tool for use to enrich and isolate cells engineered to express one or more desired genes.

An Introduction to Fluorescence in situ Hybridization in Microorganisms.

Fluorescence in situ hybridization (FISH) is a molecular biology technique that enables the localization, quantification, and identification of microorganisms in a sample. This technique has found applications in several areas, most notably the environmental, for quantification and diversity assessment of microorganisms and, the clinical, for the rapid diagnostics of infectious agents. The FISH method is based on the hybridization of a fluorescently labeled nucleic acid probe with a complementary sequence that is present inside the microbial cell, typically in the form of ribosomal RNA (rRNA). In fact, an hybridized cell is typically only detectable because a large number of multiple fluorescent particles (as many as the number of target sequences available) are present inside the cell. Here, we will review the major steps involved in a standard FISH protocol, namely, fixation/permeabilization, hybridization, washing, and visualization/detection. For each step, the major variables/parameters are identified and, subsequently, their impact on the overall hybridization performance is assessed in detail.

FISH in Suspension or in Adherent Cells.

Fluorescence in situ hybridization (FISH) enables the detection and enumeration of microorganisms in a diversity of samples. Short-length oligonucleotide DNA probes complementary to 16S or 23S rRNA sequences are generally used to target different phylogenetic levels. The protocol for the application of FISH to aggregated or suspended cells in mixed microbial communities is described in this chapter, with a special emphasis on environmental samples.

Bioinformatic Tools and Guidelines for the Design of Fluorescence In Situ Hybridization Probes.

Fluorescence in situ hybridization (FISH) is a well-established technique that allows the detection of microorganisms in diverse types of samples (e.g., clinical, food, environmental samples, and biofilm communities). The FISH probe design is an essential step in this technique. For this, two strategies can be used, the manual form based on multiple sequence alignment to identify conserved regions and programs/software specifically developed for the selection of the sequence of the probe. Additionally, databases/software for the theoretical evaluation of the probes in terms of specificity, sensitivity, and thermodynamic parameters (melting temperature and Gibbs free energy change) are used. The purpose of this chapter is to describe the essential steps and guidelines for the design of FISH probes (e.g., DNA and Nucleic Acid Mimic (NAM) probes), and its theoretical evaluation through the application of diverse bioinformatic tools.