ABSTRACT
Radiotherapy (RT) is one of the major treatment modalities among surgery and chemotherapy for carcinoma breast. The surface dose study of modified reconstructive constructive Mastectomy (MRM) breast is important due to the heterogeneity in the body contour and the conventional treatment angle to save the lungs and heart from the radiation. These angular entries of radiation beam cause an unpredictable dose deposition on the body surface, which has to be monitored. Thermoluminescent dosimeter (TLD) or optically stimulated luminescent dosimeter (nano OSLD) are commonly preferable dosimeters for this purpose. The surface dose response of TLD and nano OSLD during MRM irradiation has been compared with the predicted dose from the treatment planning system (TPS). The study monitored 100 MRM patients by employing a total 500 dosimeters consisting of TLD (n = 250) and nano OSLD (n = 250), during irradiation from an Elekta Versa HD 6 MV Linear accelerator. The study observed a variance of 3.9% in the dose measurements for TLD and 3.2% for nano OSLD from the planned surface dose, with a median percentage dose of 44.02 for nano OSLD and 40.30 for TLD (p value 0.01). There was no discernible evidence of variation in dose measurements attributable to differences in field size or from patient to patient. Additionally, no variation was observed in dose measurements when comparing the placement of the dosimeter from central to off-centre positions. In comparison, a minor difference in dose measurements were noted between TLD and nano OSLD, The study's outcomes support the applicability of both TLD and nano OSLD as effective dosimeters during MRM breast irradiation for surface dose evaluation.
Subject(s)
Breast Neoplasms , Mastectomy , Radiotherapy Dosage , Thermoluminescent Dosimetry , Humans , Female , Thermoluminescent Dosimetry/methods , Breast Neoplasms/radiotherapy , Breast Neoplasms/surgery , Radiotherapy Planning, Computer-Assisted/methods , Optically Stimulated Luminescence Dosimetry/methods , Middle Aged , Radiation Dosage , Adult , Breast/radiation effects , Breast/surgeryABSTRACT
Objective. This study characterized optically-stimulated luminescent dosimeter (OSLD) nanoDots for use in a therapeutic carbon beam using the Imaging and Radiation Oncology Core (IROC) framework for remote output verification.Approach. The absorbed dose correction factors for OSLD (fading, linearity, beam quality, angularity, and depletion), as defined by AAPM TG 191, were characterized for carbon beams. For the various correction factors, the effect of linear energy transfer (LET) was examined by characterizing in both a low and high LET setting.Main results. Fading was not statistically different between reference photons and carbon, nor between low and high LET beams; thus, the standard IROC-defined exponential function could be used to characterize fading. Dose linearity was characterized with a linear fit; while low and high LET carbon linearity was different, these differences were small and could be rolled into the uncertainty budget if using a single linearity correction. A linear fit between beam quality and dose-averaged LET was determined. The OSLD response at various angles of incidence was not statistically different, thus a correction factor need not be applied. There was a difference in depletion between low and high LET irradiations in a primary carbon beam, but this difference was small over the standard five readings. The largest uncertainty associated with the use of OSLDs in carbon was because of thekQcorrection factor, with an uncertainty of 6.0%. The overall uncertainty budget was 6.3% for standard irradiation conditions.Significance. OSLD nanoDot response was characterized in a therapeutic carbon beam. The uncertainty was larger than for traditional photon applications. These findings enable the use of OSLDs for carbon absorbed dose measurements, but with less accuracy than conventional OSLD audit programs.
Subject(s)
Carbon , Carbon/chemistry , Carbon/therapeutic use , Radiometry/methods , Linear Energy Transfer , Uncertainty , Optically Stimulated Luminescence Dosimetry/methods , Radiotherapy Dosage , HumansABSTRACT
To analyse the fetal dose in all three trimesters in patients treated for brain tumors during pregnancy, a modified rando phantom representing three different trimesters was used with provisions for insertion of ion-chamber and Optically Simulated Luminescence Dosimeter (OSLD). The measurement regions were chosen at the level of fundus, umbilicus and pubis. Seven different treatment plans with 6FF and 6FFF beam energies were generated. Treating pregnant patients with brain tumors is safe irrespective of planning modalities except 3DCRT plan where the dose is 10.24 cGy.
Subject(s)
Optically Stimulated Luminescence Dosimetry , Radiotherapy, Conformal , Humans , Luminescence , Radiation Dosimeters , Radiotherapy, Conformal/methods , Radiotherapy Dosage , Radiotherapy Planning, Computer-Assisted/methods , Phantoms, Imaging , Optically Stimulated Luminescence Dosimetry/methodsABSTRACT
BACKGROUND: Optically stimulated luminescence (OSL) dosimeters produce a signal linear to the dose, which fades with time due to the spontaneous recombination of energetically unstable electron/hole traps. When used for radiotherapy (RT) applications, fading affects the signal-to-dose conversion and causes an error in the final dose measurement. Moreover, the signal fading depends to some extent on treatment-specific irradiation conditions such as irradiation times. PURPOSE: In this work, a dose calibration function for a novel OSL film dosimeter was derived accounting for signal fading. The proposed calibration allows to perform dosimetry evaluation for different RT treatment regimes. METHODS: A novel BaFBr:Eu2+ -based OSL film (Zeff , 6 MV = 4.7) was irradiated on a TrueBeam STx using a 6 MV beam with setup: 0° gantry angle, 90 cm SSD, 10 cm depth, 10 × 10 cm2 field. A total of 86 measurements were acquired for dose-rates ( D Ì $\dot{D}$ ) of 600, 300, and 200 MU/min for irradiation times (tir ) of 0.2, 1, 2, 4.5, 12, and 23 min and various readout times (tscan ) between 4 and 1440 min from the start of the exposure (beam-on time). The OSL signal, S ( D Ì , t i r , t s c a n ) $S(\dot{D},{t}_{ir},{t}_{scan})$ , was modeled via robust nonlinear regression, and two different power-law fading models were tested, respectively, independent (linear model) and dependent on the specific t i r ${t}_{ir}$ (delivery-dependent model). RESULTS: After 1 day from the exposure, the error on the dose measurement can be as high as 48% if a fading correction is not considered. The fading contribution was characterized by two accurate models with adjusted-R2 of 0.99. The difference between the two models is <4.75% for all t i r ${t}_{ir}$ and t s c a n ${t}_{scan}$ . For different beam-on times, 3, 10.5, and 20 min, the optimum t s c a n ${t}_{scan}$ was calculated in order to achieve a signal-to-dose conversion with a model-related error <1%. In the case of a 3 min irradiation, this condition is already met when the OSL-film is scanned immediately after the end of the irradiation. For an irradiation of 10.5 and 20 min, the minimum scanning time to achieve this model-related error increases, respectively, to 30 and 90 min. Under these conditions, the linear model can be used for the signal-to-dose conversion as an approximation of the delivery-dependent model. The signal-to-dose function, D(Mi , j , t s c a n $\ {t}_{scan}$ ), has a residual mean error of 0.016, which gives a residual dose uncertainty of 0.5 mGy in the region of steep signal fading (i.e., t s c a n ${t}_{scan}\ $ = 4 min). The function of two variables is representable as a dose surface depending on the signal (Mi , j ) measured for each i,j-pixel and the time of scan ( t s c a n ${t}_{scan}$ ). CONCLUSIONS: The calibration of a novel OSL-film usable for dosimetry in different RT treatments was corrected for its signal fading with two different models. A linear calibration model independent from the treatment-specific irradiation condition results in a model-related error <1% if a proper scanning time is used for each irradiation length. This model is more practical than the delivery-dependent model because it does not need a pixel-to-pixel fading correction for different t i r ${t}_{ir}$ .
Subject(s)
Optically Stimulated Luminescence Dosimetry , Radiation Dosimeters , Calibration , Optically Stimulated Luminescence Dosimetry/methods , Radiometry , Linear Models , LuminescenceABSTRACT
In respect of radiation dosimetry, several applications require dose distribution verification rather than absolute dosimetry. Most protocols use radiological and radiochromic films and ionization chambers or diode arrays for dose mapping. The films are disposable which causes the precision of the results dependent on film production variability. The measurements with arrays of ionization chambers or diodes mainly lack spatial resolution. This review aims to provide an overview of the use of optically stimulated luminescence detectors (OSLDs) for one-dimensional (1D) and two-dimensional (2D) dose mapping in different applications. It reviews the ideas, OSL materials, and applications related to the assessment of dose distribution using OSLDs in the form of film or ceramic plate (BeO). Additionally, it reviews research published in the international scientific literature from 1998 to 2021. As an outcome, a table containing the main characteristics of each relevant paper is shown. The results section was divided by the type of OSL material, and we briefly described the principal findings and the significant developments of each mentioned study such as film production and OSL reader assembly. The purpose of this study was to present an overview of the main findings of several research groups on the use of OSLD in the form of film or plate for 1D and 2D dose mapping. Finally, the potential future development of dose mapping using OSLD films was outlined.
Subject(s)
Optically Stimulated Luminescence Dosimetry , Luminescence , Luminescent Measurements , Optically Stimulated Luminescence Dosimetry/methods , Radiation Dosage , RadiometryABSTRACT
The detailed dose analysis at the extremities remains a challenge, without affecting operators' mobility and their tactile sense. Using films loaded with optically stimulated luminescence (OSL) crystals have been studied in order to overcome some of these challenges in 2D dosimetry. In this work, we investigated flexible polymeric films loaded with MgB4O7:Ce,Li to acquire a better understanding of the dependence of the dosimetric signal characteristics on the production process and the influence of using different powder grain sizes. In film production, five different solvents were used: acetone-benzene, dichloromethane, chloroform, tetrahydrofuran and formic acid. Our results indicate that acetone-benzene is the solvent mixture that less influences the signal emitted by treated crystals, in comparison with the signal emitted by the pristine crystal powder. Conversely, by using formic acid, the crystalline structure of the sample was most severely modified, leading to a drastic reduction of the emitted OSL signal. We found that the extent of the grain surface in contact with the solvent in the process is important and should be taken into consideration when choosing the proper grain size to be used. Highlights Polymeric films loaded with MgB4O7:Ce,Li crystals were produced using different solvents.Different effect on the OSL signal was found depending on the used solvent.Among the evaluated solvents, acetone-benzene was the one that less affected the OSL signal.
Subject(s)
Optically Stimulated Luminescence Dosimetry , Acetone , Benzene , Chloroform , Formates , Furans , Luminescence , Methylene Chloride , Optically Stimulated Luminescence Dosimetry/methods , Polymers , Powders , SolventsABSTRACT
Several common pharmaceuticals such as ibuprofen, paracetamol, aspirin, oral contraceptives, drugs for the prevention of motion sickness and food supplements such as table vitamins and minerals have been studied for the purposes of retrospective dosimetry using optically stimulated luminescence (OSL). The essence is that the tablets with these drug substances contain additive crystalline materials which, after irradiation and stimulation, may exhibit luminescence. For most of the pharmaceuticals and food supplements, a radiation-induced dose-dependent OSL signal was detected. Subsequently, basic dosimetric characteristics of the materials were studied, specifically sensitivity changes during repeated OSL readings, dose response, zero-dose, minimum detectable dose (MDD) and fading. The most radiation sensitive materials were food supplements with Mg providing zero-dose and MDD values at the level of several mGy. For Mg supplements, considerable sensitivity changes in OSL signal were observed. Despite this, they could be corrected using a Single-Aliquot Regenerative-dose (SAR) protocol. The OSL signals of the other materials were relatively weak but they were well reproducible and exhibited linear dose response. The MDD values were variable among the materials and ranged from 0.1 to several Gy. However, for some of the pharmaceuticals, a very high and variable zero-dose of more than 3 Gy was observed that would rule out the possibility of dose reconstruction for triage purposes. The OSL signal exhibited a significant fading rate for most of the materials. The measurements for dose reconstruction should be performed as soon as possible after irradiation, i.e. within a maximum of a few days.
Subject(s)
Optically Stimulated Luminescence Dosimetry , Dietary Supplements , Optically Stimulated Luminescence Dosimetry/methods , Pharmaceutical Preparations , Radiation Dosage , Retrospective StudiesABSTRACT
Radiotherapy is a well-established and important treatment for cancer tumors, and advanced technologies can deliver doses in complex three-dimensional geometries tailored to each patient's specific anatomy. A 3D dosimeter, based on optically stimulated luminescence (OSL), could provide a high accuracy and reusable tool for verifying such dose delivery. Nanoparticles of an OSL material embedded in a transparent matrix have previously been proposed as an inexpensive dosimeter, which can be read out using laser-based methods. Here, we show that Cu-doped LiF nanocubes (nano-LiF:Cu) are excellent candidates for 3D OSL dosimetry owing to their high sensitivity, dose linearity, and stability at ambient conditions. We demonstrate a scalable synthesis technique producing a material with the attractive properties of a single dosimetric trap and a single near-ultraviolet emission line well separated from visible-light stimulation sources. The observed transparency and light yield of silicone sheets with embedded nanocubes hold promise for future 3D OSL-based dosimetry.
Subject(s)
Nanocomposites , Optically Stimulated Luminescence Dosimetry , Humans , Luminescence , Optically Stimulated Luminescence Dosimetry/methodsABSTRACT
In this investigation, the Continuous-Wave Optically Stimulated Luminescence (CW-OSL) properties of polyminerals extracted from Mexican and Peruvian Guajillo chilli were studied using a source of cesium-137 (Cs-137) gamma radiation. The Guajillo chilli polyminerals were stimulated with blue light for 120 s, and their luminescence was detected in the UV region. The General Order Kinetics (GOK) deconvolution analysis of the CW-OSL curves was carried out using three individual components. The CW-OSL dose response from 10 to 5000 Gy was analysed in Guajillo chilli polyminerals. After different storage periods, the polyminerals show an increase in the CW-OSL intensity. A strong and moderate effect of the sunlight (60 min) and artificial (6 h) light is observed on the CW-OSL response. Therefore, the CW-OSL properties of polyminerals could be used in the identification of Mexican and Peruvian Guajillo chilli exposed to Cs-137 gamma radiation.
Subject(s)
Gamma Rays , Lighting , Minerals/chemistry , Optically Stimulated Luminescence Dosimetry/methods , Cesium Radioisotopes/chemistry , SunlightABSTRACT
The megalithic jar sites of Laos (often referred to as the Plain of Jars) remain one of Southeast Asia's most mysterious and least understood archaeological cultures. The sites, recently inscribed as UNESCO World Heritage, host hollowed stone jars, up to three metres in height, which appear scattered across the landscape, alone or clustered in groups of up to more than 400. Until now, it has not been possible to estimate when the jars were first placed on the landscape or from where the stone was sourced. Geochronological analysis using the age of detrital zircons demonstrates a likely quarry source for one of the largest megalithic jar sites. Optically Stimulated Luminescence (OSL) dating suggests the jars were positioned at the sites potentially as early as the late second millennium BC. Radiocarbon dating of skeletal remains and charcoal samples places mortuary activity around the jars from the 9-13th century AD, suggesting the sites have maintained ritual significance from the period of their initial placement until historic times.
Subject(s)
Fossils/history , Geologic Sediments/analysis , Optically Stimulated Luminescence Dosimetry/methods , Archaeology , Charcoal/history , Culture , History, Ancient , History, Medieval , Humans , Laos , Lead/analysis , Radiometric Dating/methods , Silicates/analysis , Zirconium/analysisABSTRACT
Characteristics of continuous wave optically stimulated luminescence (CW-OSL) and linear modulation OSL (LM-OSL) from three different types of cowrie shells are presented. Irradiated samples were optically stimulated at 72 mW/cm2 for CW-OSL and linearly ramped from zero to 72 mW/cm2 to obtain LM-OSL. The measured CW-OSL and LM-OSL curves of the shells are each determined to consist of three components namely fast, medium and slow components. The fast, medium and slow LM-OSL components peak at 17.0 ± 0.8, 45.0 ± 1.8 and 140.8 ± 6.7 s respectively for all samples. In addition, peak positions are independent of dose. The photoionization cross-sections of the OSL traps for the three components estimated from CW-OSL are similar to those determined using LM-OSL. The OSL of the three components increases linearly with dose. The coefficient of variation of responses from repeated measurements of same aliquot lies below 2.3%. The shells are thus potential materials for retrospective dosimetry.
Subject(s)
Animal Shells/chemistry , Optically Stimulated Luminescence Dosimetry/methods , Animals , Mollusca , Radiation DosageABSTRACT
The aim of this work is to study the dosimetric properties of tissue-equivalent thulium doped NaMgF3 neighborites and to determine their possible application as dosimeters in personal dosimetry. In this aspect, radioluminescence (RL) and optically stimulated luminescence (OSL) dosimetric properties of undoped and Tm3+ -doped NaMgF3 have been investigated for the first time. Samples were synthesized by solid state reaction and by considering a stoichiometric mixture of pure NaF and MgF2 reagents. Two emission peaks centered at 460 and 360 nm have been found in the RL emission spectrum of the doped samples, which can be ascribed to the 1D2 - 3F4 and 1D2 - 3H6 transitions of Tm3+ cations, respectively. Maximum OSL emission under blue light stimulation has been found for samples doped with 0.2 mol % of thulium. Furthermore, the OSL signal of this compound depends linearly on dose within the range 0.05-100 Gy. Besides, its OSL signal features satisfactory repeatability and a minimum detectable dose of 0.04 Gy. Finally, it has been found a low fading of the OSL signal of approximately 13% after the first 60 h, after which the OSL response remains constant. The obtained results suggest the feasibility of using this compound as an OSL detector in personal dosimetry.
Subject(s)
Optically Stimulated Luminescence Dosimetry/methods , Thulium/chemistry , Luminescent Measurements , Microscopy, Electron, Scanning , Powder DiffractionABSTRACT
During radiation therapy, incident radiation oblique to the skin surface is high and may cause severe skin damage. Understanding the dose of radiation absorbed by the skin is important for predicting skin damage due to radiation. In this study, we used a high-energy (4 MV) X-ray system and an optically stimulated luminescence dosimeter (OSLD) that was developed for personal exposure dosimetry. We determined the dose variation and angular dependence, which are the characteristics of a small OSLD required to derive the calculation formula for the oblique surface dose. The dose variation was determined using the coefficient of variation. The maximum coefficient of variation for 66 small-field OSLDs was 1.71%. The angular dependence, obtained from the dose ratio of the dosimeter in the vertical direction, had a maximum value of 1.37. We derived a new equation in which the oblique surface dose can be calculated within the error range of -7.7-5.1%.
Subject(s)
Optically Stimulated Luminescence Dosimetry/methods , Radiotherapy/methods , Dose-Response Relationship, Radiation , Humans , Radiation Injuries/prevention & control , Radiotherapy/adverse effects , Skin/injuriesABSTRACT
PURPOSE: We investigated the impact of transverse magnetic fields on the dose response of a nanoDot optically stimulated luminescence dosimetry (OSLD) in megavoltage photon beams. METHODS: The nanoDot OSLD response was calculated via Monte Carlo (MC) simulations. The responses RQ and RQ,B without and with the transverse magnetic fields of 0.35-3 T were analyzed as a function of depth at a 10 cm × 10 cm field for 4-18 MV photons in a solid water phantom. All responses were determined based on comparisons with the response under the reference conditions (depth of 10 cm and a 10 cm × 10 cm field) for 6 MV without the magnetic field. In addition, the influence of air-gaps on the nanoDot response in the magnetic field was estimated according to Burlin's general cavity theory. RESULTS: The RQ as a function of depth for 4-18 MV ranged from 1.013 to 0.993, excepting the buildup region. The RQ,B increased from 2.8% to 1.5% at 1.5 T and decreased from 3.0% to 1.1% at 3 T in comparison with RQ as the photon energy increased. The depth dependence of RQ,B was less than 1%, excepting the buildup region. The top air-gap and the bottom air- gap were responsible for the response reduction and the response increase, respectively. CONCLUSIONS: The response RQ,B varied depending on the magnetic field intensity, and the variation of RQ,B reduced as the photon beam energy increased. The air-gaps affected the dose deposition in the magnetic fields.
Subject(s)
Magnetic Fields , Optically Stimulated Luminescence Dosimetry/methods , Radiotherapy Dosage , Radiotherapy/methods , Computer Simulation , Humans , Models, Theoretical , Monte Carlo Method , Phantoms, Imaging , Photons , WaterABSTRACT
Thermoluminescent dosimeters (TLD) and optically stimulated luminescent dosimeters (OSLD) are practical, accurate, and precise tools for point dosimetry in medical physics applications. The charges of Task Group 191 were to detail the methodologies for practical and optimal luminescence dosimetry in a clinical setting. This includes: (a) to review the variety of TLD/OSLD materials available, including features and limitations of each; (b) to outline the optimal steps to achieve accurate and precise dosimetry with luminescent detectors and to evaluate the uncertainty induced when less rigorous procedures are used; (c) to develop consensus guidelines on the optimal use of luminescent dosimeters for clinical practice; and (d) to develop guidelines for special medically relevant uses of TLDs/OSLDs such as mixed photon/neutron field dosimetry, particle beam dosimetry, and skin dosimetry. While this report provides general guidelines for TLD and OSLD processes, the report provides specific details for TLD-100 and nanoDotTM dosimeters because of their prevalence in clinical practice.
Subject(s)
Equipment and Supplies/standards , Optically Stimulated Luminescence Dosimetry/methods , Optically Stimulated Luminescence Dosimetry/standards , Thermoluminescent Dosimetry/methods , Thermoluminescent Dosimetry/standards , Calibration , Guidelines as Topic , Humans , Luminescence , Models, Theoretical , Neutrons , Photons , Remote Sensing Technology , Reproducibility of ResultsABSTRACT
The present work explores the luminescence behavior of animal bones and more specifically, chicken bones, using OSL in order to investigate whether they can be used for the dose assessment in the case of an accident or as dosimeters at the post-sterilization dosimetry of foods. Results indicate that the OSL sensitivity is rather low and the lower detection limit is ~18â¯Gy eliminating the possibility of using bones as emergency dosimeter. However, the OSL dose response is linear for doses up to ~1.0â¯kGy, while response over the entire dose range, up to several kGy, can be fitted with an exponential saturation curve. When bones are kept in dark, half of the initial OSL signal is lost seven days after irradiation, with no further loss for longer time periods up to two months post-irradiation. Since bones are heat-sensitive and exhibit sensitization, a dose recovery test was also conducted using the SARHS protocol in order to investigate if the protocol is capable of calculating the sterilization/accidental dose of irradiated chicken/poultry. The "unknown" doses were successfully recovered even when fading was considered. Considering the fact that bones are not directly exposed to light (protected by the skin and the flesh) or to high temperatures, it seems that they could be used at retrospective dosimetry and the identification of irradiated food products containing bone (food post-sterilization dosimetry).
Subject(s)
Bone and Bones/radiation effects , Food Irradiation/methods , Optically Stimulated Luminescence Dosimetry/methods , Animals , Bone and Bones/chemistry , Chickens , Humans , In Vitro Techniques , Limit of Detection , Radiation Dosage , Radioactive Hazard Release , Retrospective StudiesABSTRACT
This study characterises and evaluates an Al2O3:C-based optically stimulated luminescent dosemeter (OSLD) system, commercially known as the nanoDot™ dosemeter and the InLight® microStar reader, for personal and in vivo dose measurements in diagnostic radiology. The system characteristics, such as dose linearity, reader accuracy, reproducibility, batch homogeneity, energy dependence and signal stability, were explored. The suitability of the nanoDot™ dosemeters was evaluated by measuring the depth dose curve, in vivo dose measurement and image perturbation. The nanoDot™ dosemeters were observed to produce a linear dose with ±2.8% coefficient variation. Significant batch inhomogeneity (8.3%) was observed. A slight energy dependence (±6.1%) was observed between 60 and 140 kVp. The InLight® microStar reader demonstrated good accuracy and a reproducibility of ±2%. The depth dose curve measured using nanoDot™ dosemeters showed slightly lower responses than Monte Carlo simulation results. The total uncertainty for a single dose measurement using this system was 11%, but it could be reduced to 9.2% when energy dependence correction was applied.
Subject(s)
Monte Carlo Method , Optically Stimulated Luminescence Dosimetry/instrumentation , Optically Stimulated Luminescence Dosimetry/methods , Radiation Dosimeters/standards , Radiography/methods , Calibration , Computer Simulation , Humans , Radiation Dosage , Reproducibility of ResultsABSTRACT
The objective of this study was to characterise thermoluminescent (TLDs) and optically stimulated luminescent dosimeters (OSLDs) at low X-ray energies and estimate the eye lens (DL), thyroid (DT) and mean glandular (DG) doses received during Full-Field Digital Mammography (FFDM) and Digital Breast Tomosynthesis (DBT). The dosimeters were characterised in mammography energies. DL, DT and DG were estimated in FFDM and DBT mode taping dosimeters on the skin of the thyroid gland and on the left eye lens of an Alderson phantom. Dosimeters were also placed on the top of a NORMI PAS phantom simulating a compressed breast. The accuracy, precision and lower limit of detection (LLD) for TLDs and OSLDs were 5 and 8%, 6 and 3%, and 38 and 11 µSv, respectively. The linearity of the kerma response had an R2 > 0.99 and energy dependence was lower than 40%. DT ranged from 0.40 to 2.87 µGy for FFDM and 1.27 to 5.99 µGy for DBT. DG was between 0.50 and 1.27 mGy for FFDM and 1.07 and 1.60 mGy for DBT. DL was below the LLD. Dosimeters showed good performance. DG values were lower than those found in the literature, whereas DT value agreed with references. Differences between DG and DT determined with OSLDs and TLDs were lower than 10% and 200%.
Subject(s)
Breast/diagnostic imaging , Lens, Crystalline/diagnostic imaging , Mammography/methods , Optically Stimulated Luminescence Dosimetry/methods , Phantoms, Imaging , Radiographic Image Enhancement/methods , Thyroid Gland/diagnostic imaging , Computer Simulation , Female , Humans , Monte Carlo Method , Radiation Dosage , Radiation Exposure/analysisABSTRACT
It was recently found that LiF:Mg,Cu,P, which is a very well-known thermoluminescent (TL) material, exhibits also quite substantial optically stimulated luminescence (OSL). In the present work a study on the influence of thermal treatment on the LiF:Mg,Cu,P OSL intensity has been performed. The results revealed that the well-known 'gold standard' of 240°C annealing is not appropriate for OSL measurements. The annealing at lower temperatures produced significantly higher OSL intensity. The highest enhancement of the OSL signal, reaching 95% (compared to the initial signal after standard annealing at 240°C/10 min) was obtained after annealing at about 190-200°C/30 min. The OSL emission spectrum of LiF:Mg,Cu,P was also measured and found to be peaked at 360 nm.
Subject(s)
Copper/chemistry , Fluorides/chemistry , Lithium Compounds/chemistry , Luminescent Agents/chemistry , Magnesium/chemistry , Optically Stimulated Luminescence Dosimetry/instrumentation , Phosphorus/chemistry , Humans , Luminescence , Luminescent Agents/radiation effects , Luminescent Measurements , Optically Stimulated Luminescence Dosimetry/methodsABSTRACT
Surface dosimetry is required for ensuring effective administration of total skin electron therapy (TSET); however, its use is often reduced due to the time consuming and complex nature of acquisition. A new surface dose imaging technique was characterized in this study and found to provide accurate, rapid and remote measurement of surface doses without the need for post-exposure processing. Disc-shaped plastic scintillators (1 mm thick × 15 mm [Formula: see text]) were chosen as optimal-sized samples and designed to attach to a flat-faced phantom for irradiation using electron beams. Scintillator dosimeter response to radiation damage, dose rate, and temperature were studied. The effect of varying scintillator diameter and thickness on light output was evaluated. Furthermore, the scintillator emission spectra and impact of dosimeter thickness on surface dose were also quantified. Since the scintillators were custom-machined, dosimeter-to-dosimeter variation was tested. Scintillator surface dose measurements were compared to those obtained by optically stimulated luminescence dosimeters (OSLD). Light output from scintillator dosimeters evaluated in this study was insensitive to radiation damage, temperature, and dose rate. Maximum wavelength of emission was found to be 422 nm. Dose reported by scintillators was linearly related to that from OSLDs. Build-up from placement of scintillators and OSLDs had a similar effect on surface dose (4.9% increase). Variation among scintillator dosimeters was found to be 0.3 ± 0.2%. Scintillator light output increased linearly with dosimeter thickness (~1.9 × /mm). All dosimeter diameters tested were able to accurately measure surface dose. Scintillator dosimeters can potentially improve surface dosimetry-associated workflow for TSET in the radiation oncology clinic. Since scintillator data output can be automatically recorded to a patient medical record, the chances of human error in reading out and recording surface dose are minimized.