Antinociceptive effect of triterpene acetyl aleuritolic acid isolated from Croton zehntneri in adult zebrafish (Danio rerio).

Croton zehntneri is a plant known as canelinha de cunhã, prevalent in the northeast region of Brazil. Many constituents of the vegetable have already been studied, and their pharmacological properties have been proven, but this is the first study to analyze the antinociceptive effect in adult zebrafish (ZFa) of the triterpene acetyl aleuritolic acid (AAA) isolated from the stem bark. The animals (ZFa; n = 6/group) were treated intraperitoneally (ip; 20 µL) with AAA (0.1 or 0.3 or 1.0 mg/mL) or vehicle (0.9% saline; 20 µL), and submitted to the locomotor activity test, as well as 96 h acute toxicity. Other groups (n = 6/each) received the same treatments and underwent acute nociception tests (formalin, cinnamaldehyde, glutamate, acid saline, capsaicin, and hypertonic saline). Possible neuromodulation mechanisms were evaluated. AAA (0.1 or 0.3 or 1.0 mg/mL) reduced the nociceptive behavior induced by acid saline and capsaicin, as well as inhibited corneal nociception induced by hypertonic saline, both without altering the animals' locomotor system and without toxicity. These analgesic effects of AAA were significantly (p > 0.05) similar to those of morphine, used as a positive control. The antinociceptive effect of AAA was inhibited by methylene blue, ketamine, camphor, ruthenium red, amiloride, and mefenamic acid. The antinociceptive effect of AAA on the cornea of animals was inhibited by capsazepine. Therefore, AAA showed pharmacological potential for the treatment of acute pain, and this effect is modulated by cGMP, NMDA receptors, transient receptor potential channels (TRPs), ASICs and has pharmacological potential for the treatment of corneal pain modulated by the TRPV1 channel.

Heavy metals detection in river water with cantilever nanobiosensor.

Heavy metals can be highly toxic depending on the dose and the chemical form. In this context, sensing devices such as nanobiosensors have been presented as a promising tool to monitor contaminants at micro and nanoscale. In this work, cantilever nanobiosensors with phosphatase alkaline were developed and applied to detect heavy metals (Pb, Ni, Cd, Zn, Co, and Al) in river water. The nanobiosensor surface was functionalized by the self-assembled monolayers (SAM) technique using 16-mercaptohexadecanoic acid, N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) and N- hydroxysuccinimide (NHS), and phosphatase alkaline enzyme. The sensing layer deposited on the cantilever surface presented a uniform morphology, at nanoscale, with 80 nm of thickness. The nanobiosensor showed a detection limit in the ppb range and high sensitivity, with a stability of fifteen days. The developed cantilever nanobiosensor is a simple tool, suitable for the direct detection of contaminants in river water.

Cantilever nanobiosensor using tyrosinase to detect atrazine in liquid medium.

The aim of this study was to develop a cantilever nanobiosensor for atrazine detection in liquid medium by immobilising the biological recognition element (tyrosinase vegetal extract) on its surface with self-assembled monolayers using gold, 16-mercaptohexadecanoic acid, 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride/n-hydroxysuccinimide. Cantilever nanobiosensors presented a surface compression tension increase when atrazine concentrations were increased, with a limit of detection and limit of quantification of 7.754 ppb (parts per billion) and 22.792 ppb, respectively. From the voltage results obtained, the evaluation of atrazine contamination in river and drinking water were very close to those of the reference sample and ultrapure water, demonstrating the ability of the cantilever nanobiosensor to distinguish different water samples and different concentrations of atrazine. Cantilever nanosensor surface functionalization was characterised by combining polarisation modulation infrared reflection-absorption spectroscopy and atomic force microscopy and indicating film thickness in nanometric scale (80.2 ± 0.4 nm). Thus, the cantilever nanobiosensor developed for this study using low cost tyrosinase vegetal extract was adequate for atrazine detection, a potential tool in the environmental field.

Development and characterization of lipid-polymeric nanoparticles for oral insulin delivery.

INTRODUCTION: The oral route is widely accepted as the most physiological path for exogenous administration of insulin, as it closely mimic the endogenous insulin pathway. Thus, in this work it is proposed an innovative lipid-polymeric nanocarrier to delivery insulin orally. Areas covered: Nanoparticles were produced through a modified solvent emulsification-evaporation method, using ethyl palmitate and hydroxypropylmethylcellulose acetate succinate as matrix. Lipid-polymeric nanoparticles were around 300 nm in size, negatively charged (-20 mV) and associated insulin with efficiency higher than 80%. Differential scanning calorimetry suggested thermal stability of nanoparticles. In vitro release assays under simulated gastrointestinal conditions resulted in 9% and 14% of insulin released at pH 1.2 during 2 h and at pH 6.8 for 6 h, respectively, demonstrating the ability of those nanoparticles to protect insulin against premature degradation. Importantly, nanoparticles were observed to be safe at potential therapeutic concentrations as did not originate cytotoxicity to intestinal epithelial cells. Lastly, the permeability of nanoencapsulated insulin through Caco-2 monolayers and a triple Caco-2/HT29-MTX/Raji B cell model correlated well with slow release kinetics, and fosters the effectiveness of nanoparticles to promote intestinal absorption of peptidic drugs. Expert opinion: Lipid-polymeric nanoparticles were developed to encapsulate and carry insulin through intestine. Overall, nanoparticles provide insulin stability and intestinal permeability.

Oligomerization of 10,16-dihydroxyhexadecanoic acid and methyl 10,16-dihydroxyhexadecanoate catalyzed by lipases.

The main monomer of tomato cuticle, 10,16-dihydroxyhexadecanoic acid (10,16-DHPA) and its methyl ester derivative (methyl-10,16-dihydroxyhexadecanote; methyl-10,16-DHHD), were used to study their oligomerization reactions catalyzed by five lipases: Candida antarctica lipase B (CAL-B), Rhizomucor miehei lipase (RM), Thermomyces lanuginosus lipase (TL), Pseudomonas cepacia lipase (PCL) and porcine pancreatic lipase (PPL). For 10,16-DHPA, optimum yields were obtained at 60 °C using toluene and 2-methyl-2-butanol (2M2B) as solvent, while for methyl-10,16-DHHD the bests yields were obtained in toluene and acetonitrile. Both reactions leaded to linear polyesters according to the NMR and FT-IR analysis, and there was no data indicating the presence of branched polymers. Using optimized conditions, poly(10,16-DHPA) and poly(methyl-10,16-DHHD) with Mw = 814 and Mn = 1,206 Da, and Mw = 982 and Mn = 860 Da, respectively, were formed according to their MALDI-TOF MS and ESI-MS data. The self-assembly of the polyesters obtained were analyzed by AFM.

Derivatives of 10,16-dihydroxyhexadecanoic acid isolated from tomato (Solanum lycopersicum) as potential material for aliphatic polyesters.

The main monomer of tomato cuticle, 10,16-dihydroxyhexadecanoic acid (or 10,16-dihydroxypalmitic acid; 10,16-DHPA), was isolated and used to efficiently synthesize two different monomers (16-hydroxy-10-oxo-hexadecanoic and 7-oxohexa-decanedioic acids) in addition to a dimer and linear and branched trimers. These compounds were fully characterized using NMR and MS techniques and could be used as starting materials for the synthesis of a wide range of chemicals and bio-polyesters, particularly the latter due to their physical properties, non-toxicity, and relative abundance among raw materials.

Clytostoma callistegioides (Bignoniaceae) wax extract with activity on aphid settling.

A bioassay-guided fractionation of leaf extracts from Clytostoma callistegioides (Cham.) Bureau ex Griseb. (Bignoniaceae) led to isolation of a natural mixture of four fatty acids with anti-insect activity against aphids. The compounds were identified by GC-MS as palmitic, stearic, linoleic and linolenic acids and quantified as their methyl esters. The anti-aphid activity of the natural mixture was traced to linolenic and linoleic acids, as shown by the settling inhibition activity of synthetic samples. Interestingly, the saturated acids (palmitic and stearic) tested alone stimulated settling on one of the tested aphids (Myzus persicae), but not on the other tested species (Rhopalosiphum padi). Although ubiquitous, none of these free acids have been previously reported in this Bignoniaceae species. The leaf surface chemistry, which is likely involved in modulating aphid settling behavior, was further investigated for the occurrence of lipophilic substances by histochemical staining. Short, stalked glandular trichomes, previously undescribed for this species, stained with osmium tetroxide and Sudan III, suggesting that the secretion of the defensive acids is related to these surface trichomes.

Influence of colour type and previous cultivation on secondary metabolites in hypocotyls and leaves of maca (Lepidium meyenii Walpers).

BACKGROUND: Maca is an Andean crop of the Brassicaceae family which is mainly known for its fertility-enhancing properties following consumption. The hypocotyls display various colours ranging from white to black. Each colour has different biological effects. The aim of this study was to analyse the concentrations of major secondary metabolites in hypocotyls and leaves of maca in a controlled planting experiment in the Peruvian Andes at 4130 m above sea level. The effects of colour type and of previous cultivation of the field were examined. RESULTS: In the hypocotyls, the colour type effect was significant for most secondary metabolites; exceptions were beta-sitosterol and campesterol. The lead-coloured, yellow and violet maca hypocotyls were rich in glucosinolates, macaene and macamides, respectively. Previous cultivation affected macaene, campesterol and indole glucosinolate concentrations. Effects on metabolite concentrations in the leaves were minor. Hypocotyls were richer in macaene, macamides and glucosinolates than were leaves, and were poorer in beta-sitosterol and total phenols. CONCLUSION: Colour type has to be considered in maca production, as colour associates with variations in concentrations of distinct bioactive metabolites. Leaves may be interesting for animal nutrition purposes as they contain essentially the same secondary metabolites as the hypocotyls but in clearly lower concentrations.

Absorption and fluorescence spectra of polyene antibiotics in the presence of human serum albumin.

The alteration in the fluorescence spectra observed for the polyene antibiotics: nystatin and amphotericin B in the presence of human serum albumin is due to a decrease in the polar character of the antibiotic environment when these are bound to the protein. Amphotericin B showed two types of binding sites, the first having very high affinity (5.8 10(7) M(-1]) and a secondary binding site with an affinity one order lower than the primary sites. This secondary binding site was very sensitive to temperature change. Nystatin yielded only one type of binding sites with an affinity of 1.1 10(6) M(-1). An electrostatic component was found in the binding of both ligands, as well as an important disorder at the protein binding sites. However the secondary binding site for AMP showed negative entropic change value, which suggests different mechanism of binding respect to the primary one. Conformational change induced by the temperature in the albumin molecule was detected by nystatin binding. Fatty acids produced an interference in the binding of both antibiotics to albumin.