LC-MS/MS Determination of Antibiotic Residues in Distillers Grains: Method Modification.

BACKGROUND: Antibiotics are used in ethanol production to discourage undesirable bacteria growth. To determine if antibiotic residues remain in the distillers grain (DG) byproduct, which is used as an animal food ingredient, the U.S. Food and Drug Administration/Center for Veterinary Medicine previously developed an LC-MS/MS method to detect residues of erythromycin A, penicillin G, virginiamycin M1, and virginiamycin S1 in DG to enable regulatory decision-making. OBJECTIVE: Erythromycin and penicillin G were quantitated using the stable isotope dilution technique with their isotopically labeled compounds, which are considered optimal internal standards (ISTDs) for quantitative mass spectrometry. With the commercial availability of virginiamycin M1-d2 since then, the objectives of this study were to evaluate the feasibility of its use as it is only doubly deuterated, and to incorporate it in the method to enhance method performance. METHOD: Antibiotic residues were solvent-extracted from DG; the extract was cleaned up by a hexane wash and solid phase extraction (SPE) and analyzed by LC-MS/MS. RESULTS: We established suitability of virginiamycin M1-d2 as an ISTD and incorporated it in the method. For all analytes, accuracy and precision ranged 90 to 102% and 3.8 to 6.8, respectively. CONCLUSIONS: We modified a previously developed LC-MS/MS method that uses virginiamycin M1-d2 as an ISTD to support surveillance studies to determine several drugs in DG. HIGHLIGHTS: Virginiamycin M1-d2 was successfully incorporated into the method for better virginiamycin M1 quantitation. This addition also allowed calibration curves for all analytes to be constructed in solvent, thereby simplifying the method.

Consumption of benzylpenicillin as a syphilis control indicator

Abstract Syphilis is a disease with compulsory and mandatory notification to the Notifiable Diseases Information System (SINAN), with benzathine benzylpenicillin being the treatment of choice. The aim of the study was to compare the consumption of benzylpenicillin benzathine, from the dispensation, between the health regions of a capital in the southern region of the country, according to the georeferencing of notified cases of syphilis. This is a descriptive, cross-sectional, retrospective study of the use of benzylpenicillin benzathine and of reported cases of syphilis. Data on syphilis cases were obtained from notifications made in SINAN, and drug consumption data were obtained from the Municipal Health Department computerized system for Drug Dispensing from January 1st, 2019 to December 31st, 2019. Notifications and drug consumption were georeferenced according to 8 health regions. From the compilation of data, the rates of cases and consumption in relation to the population of each region were calculated. A total of 3188 notifications and a total of 35191 vials of benzathine benzylpenicillin were analyzed. The ratio of vials by SINAN notifications showed that each patient took 11 vials of the drug, which is a higher value if we consider that the complete treatment is 2 to 6 vials per case.

A two-dimensional photonic crystal hydrogel biosensor for colorimetric detection of penicillin G and penicillinase inhibitors.

A simple penicillinase functionalized two-dimensional photonic crystal hydrogel (2DPPCH) biosensor was developed for colorimetric detection of penicillin G and penicillinase inhibitors. The penicillinase can specifically recognize penicillin G and catalyze it to produce penicilloic acid, which decreases the pH of the hydrogel microenvironment and shrinks the pH-sensitive hydrogel. The particle spacing decrease of the 2D photonic crystal array induced by the hydrogel shrinkage further causes a blue-shift in the diffraction wavelength. While the hydrolysis reaction is repressed upon treatment with clavulanate potassium (a kind of penicillinase inhibitor), no significant change in the diffraction wavelength is found. The detection of targets can be achieved by measuring the Debye diffraction ring diameter or observing the structural color change in the visible region. The lowest detectable concentrations for penicillin G and clavulanate potassium are 1 µM and 0.1 µM, respectively. Moreover, the 2DPPCH is proved to exhibit high selectivity and an excellent regeneration property, and it shows satisfactory performance for penicillin G analysis in real water samples.

BL30SEC Method for Detection of Beta-Lactams in Raw Commingled Cow Milk: AOAC Performance Tested MethodSM 061902.

Testing milk for antibiotics before acceptance into dairies is required by the U.S. Pasteurized Milk Ordinance. Technological advances in tests have reduced screening times and improved detection accuracy. This work describes the validation of the Charm Rapid One Step Assay Beta-Lactam 30 Second Test according to the U.S. Food and Drug Administration Center for Veterinary Medicine protocol for raw commingled milk. Milk is added to the lateral flow test strip in an incubator/reader to deliver a 30 second result. Independent laboratory validation followed sensitivity, interference, and incurred residue protocols. Sensitivity, in parts per billion (ppb = µg/kg), using a probit curve determined 90% percent detection with 95% confidence, which met National Conference of Interstate Milk Shipments (NCIMS) specifications. Six U.S. approved beta-lactam drugs were detected below, but within 50% of, target/tolerance levels for penicillin G 2.9 ppb, ampicillin 5.9 ppb, amoxicillin 5.8 ppb, cephapirin 13 ppb, cloxacillin 8.1 ppb, and ceftiofur metabolites 73 ppb. No interferences were observed from 33 animal drugs at 100 ppb, somatic cells at 1.2 million/mL, or bacterial levels of >300 000 CFU/mL. Incurred residue detection levels were similar to levels determined with the spiked parent compound. The data support NCIMS that the BL30SEC method met U.S. criteria for testing milk for beta-lactams.

Dissipation and residue determination of penicillin G and its two metabolites in citrus under field conditions by DSPE/UPLC-MS/MS.

A rapid determination method of residual penicillin G and its two metabolites in citrus was developed and validated by dispersive solid-phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry (DSPE/UPLC-MS/MS). The samples were extracted with 80% acetonitrile and purified with octadecylsilane. High linearity was obtained with correlation coefficients (r2 ) >0.9981. The limits of quantification were 0.005-0.01 mg/kg. The recoveries of penicillin G and its metabolites spiked in blank citrus were within 76.7-107%, with relative standard deviations of 1.3-9.6%. The dissipation dynamics and distribution of penicillin G in citrus followed first-order kinetics, with half-life of 1.7-2.7 days. Penicillin G degraded easily in citrus and the metabolite was mainly penilloic acid, which can exist stably for long time. The terminal residues of penicillin G in pulp, whole citrus and peels were 0.015-0.701, 0.047-7.653 and 0.162-13.376 mg/kg, respectively. The hazard indexes for risk assessment of citrus were significantly <1, suggesting that the health risks to humans after consumption of citrus were insignificant and negligible. These results could provide necessary data for evaluating the safe and proper use of penicillin G in citrus.

Magnetic mesoporous carbon material based electrochemical sensor for rapid detection of penicillin sodium in milk.

In recent years, to increase growth rate and prevent infectious diseases, an excessive use of antibiotics in livestock breeding processes has resulted in the presence of antibiotic residues in animal foods. In this experiment, a new kind of electrochemical sensor is prepared based on magnetic mesoporous hollow carbon microspheres (MHM) as a penicillinase (Pen X) adsorption carrier to rapidly detect penicillin sodium (Pen G), named Pen X/MHM/MGCE. The MHM-adsorbed penicillinase can be separated from the solution by magnetic attraction and fixed on a magnetic glassy carbon electrode by physical adsorption, which is easy to operate and avoids the interference of a crosslinking agent at the active site of the enzyme. A differential pulse voltammetry (DPV) method is used to immerse the working electrode in test samples containing different concentrations of penicillin sodium solution with 0.5 mg/mL oxidized hematoxylin. According to the quantitative relationship between the current value and the concentration of penicillin sodium, the concentration of penicillin sodium in the tested samples can be determined. The detection range of the sensor is 10-8 to 10-2 mg/mL, the linear relationship is good (R2 = 0.9983), and the detection limit (LOD) is 2.655 × 10-7 mg/mL (S/N = 3). The detection of penicillin sodium in milk using a standard addition method shows good recovery. Furthermore, the proposed method has the advantages of a wide detection range, good enzyme immobilization capacity, good precision and stability, convenient cleaning, and recycling of solid materials. Thus, it can successfully achieve rapid detection in milk samples. PRACTICAL APPLICATION: The sensor provides a low detection limit and high recovery rate of electrode material; therefore, the sensor can realize the rapid and quantitative detection of penicillin sodium in milk.

Detection of penicillin G residues in milk based on dual-emission carbon dots and molecularly imprinted polymers.

Instant detection of antibiotic residues in dairy products has been remained a challenge. Current methods require careful samples storage and handling, skilled personnel, and expensive instrumentations. Herein, we report the preparation of a ratiometric fluorescent sensor that contains different colored Carbon dots (CDs) as dual fluorophores, and a mesoporous structured molecularly imprinted polymer as a receptor (B/YCDs@mMIP) for penicillin-G (PNG) detection in milk. Upon PNG addition, only the fluorescence of yellow emissive CDs was quenched due to analyte blockage, while that of the blue emissive CDs stayed almost constant, which led to an obvious change in the fluorescence color from the yellow to blue. A linear response in the range of 1-32 nM with a detection limit of 0.34 nM and excellent recognition specificity for PNG over its analogs were also observed. Comparing our sensor with its counterparts, it exhibited a promising potential in the in-situ PNG detection in milk.

Characterization of coagulase-negative staphylococci from brining baths in Germany.

Brining is an important step in cheese making, and using brine baths for this purpose is common practice in German dairies. Time of brining, brine concentration, and composition of the complex and heterogeneous microbiota, including coagulase-negative staphylococci (CNS), contribute to the ripening and taste of cheese. As well as producing staphylococcal enterotoxins, some CNS show antibiotic resistance; therefore, we isolated 52 strains of presumptive CNS from cheese brines from 13 factories in Germany. Species identification by sodA gene sequencing revealed that 50 isolates were CNS: 31 Staphylococcus saprophyticus, 4 Staphylococcus carnosus, 4 Staphylococcus equorum, 3 Staphylococcus sciuri, 2 Staphylococcus hominis, and 2 Staphylococcus warneri. One isolate each was identified as Staphylococcus epidermidis, Staphylococcus pasteurii, Staphylococcus succinus, and Staphylococcus xylosus. Further subtyping of the Staph. saprophyticus isolates to the subspecies level revealed the presence of 6 Staph. saprophyticus ssp. saprophyticus. Using pulsed-field gel electrophoresis with the identified Staph. saprophyticus strains, 12 independent clones were identified, resulting in the exclusion of 18 strains from further testing. In 19 of the remaining 32 CNS isolates, resistance to antibiotics was observed. Resistance was found against oxacillin (17), penicillin (5), and cefoxitin (1). Four isolates expressed resistance to both oxacillin and penicillin. No resistance was found to enrofloxacin, tetracycline, gentamicin, or erythromycin. Then, PCR analysis for antibiotic resistance genes was performed for 22 different genes. Only genes blaZ and blaTEM were found in 7 isolates. These isolates were selected for challenge tests with different concentrations of lactic acid and NaCl to examine whether expression of antibiotic resistance was influenced by these stressors. An increase in the minimal inhibitory concentration from 0 to 2.0 µg/mL was seen for trimethoprim/sulfamethoxazole only in one isolate of Staph. saprophyticus at an increased lactic acid concentration. Finally, all isolates were tested for genetic determinants (entA, entB, entC, entD, and entE) of the most common staphylococcal enterotoxins; none of these genes were detected. We found no indication for unacceptable risks originating from the isolated CNS.

An impedimetric aptasensor for ultrasensitive detection of Penicillin G based on the use of reduced graphene oxide and gold nanoparticles.

The authors describe an impedimetric aptasensor for Penicillin G (PEN) which is an important antibiotic. The method is based on the use of a pencil graphite electrode (PGE) modified with reduced graphene oxide (RGO) and gold nanoparticles (GNPs) for ultrasensitive detection of PEN. The morphology of a bare PGE, RGO/PGE, and GNP/RGO/PGE, and the functional groups on graphene oxide (GO) and RGO were studied using scanning electron microscopy and Fourier transform infrared spectroscopy. Electrochemical impedance spectroscopy was used for detection of PEN by measuring the charge transfer resistance (Rct). Also, cyclic voltammetry was recorded at potential range of 0.30 to +0.70 V for PGE treatment. This aptamer-based assay has a wide linear range that extends from 1.0 fM to 10 µM, and a limit of detection as low as 0.8 fM. The method was applied to the determination of PEN in spiked milk from cow, sheep, goat and water buffalo. Recoveries ranged from 92% to 104%. The assay is fast, ultrasensitive, high reproducible, and selective over antibiotics such as streptomycin, tetracycline, and sulfadiazine. Graphical abstract Schematic presentation of an impedimetric aptasensor for Penicillin G antibiotic using a pencil graphite electrode (PGE) modified with reduced graphene oxide (RGO) and gold nanoparticles (GNPs). This aptamer based assay has limit of detection as low as 0.8 fM.

Development of a Minimally Invasive Microneedle-Based Sensor for Continuous Monitoring of ß-Lactam Antibiotic Concentrations in Vivo.

Antimicrobial resistance poses a global threat to patient health. Improving the use and effectiveness of antimicrobials is critical in addressing this issue. This includes optimizing the dose of antibiotic delivered to each individual. New sensing approaches that track antimicrobial concentration for each patient in real time could allow individualized drug dosing. This work presents a potentiometric microneedle-based biosensor to detect levels of ß-lactam antibiotics in vivo in a healthy human volunteer. The biosensor is coated with a pH-sensitive iridium oxide layer, which detects changes in local pH as a result of ß-lactam hydrolysis by ß-lactamase immobilized on the electrode surface. Development and optimization of the biosensor coatings are presented, giving a limit of detection of 6.8 µM in 10 mM PBS solution. Biosensors were found to be stable for up to 2 weeks at -20 °C and to withstand sterilization. Sensitivity was retained after application for 6 h in vivo. Proof-of-concept results are presented showing that penicillin concentrations measured using the microneedle-based biosensor track those measured using both discrete blood and microdialysis sampling in vivo. These preliminary results show the potential of this microneedle-based biosensor to provide a minimally invasive means to measure real-time ß-lactam concentrations in vivo, representing an important first step toward a closed-loop therapeutic drug monitoring system.

Multivariate optimization methods for in-situ growth of LDH/ZIF-8 nanocrystals on anodized aluminium substrate as a nanosorbent for stir bar sorptive extraction in biological and food samples.

In-situ growth of zeolite imidazolate frameworks (ZIFs) on the surface of layered double hydroxides (LDHs) for preparation of porous nanocomposites is a favorable strategy to design potential materials in separation fields. In this research, nanoporous Zn-Al LDH/ZIF-8 composite was prepared by in-situ growth of ZIF-8 on the Zn-Al LDH surface. The nanocomposite was applied for stir bar sorptive extraction and detection of benzylpenicillin (penicillin G, PEN G). Characterizations of the nanocomposite were performed by various techniques, including Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and thermogravimetric differential thermal analysis. An optimized strategy based on response surface methodology was combined with high performance liquid chromatography analysis. Under the optimized conditions, the limit of detection and quantification obtained were 0.05 and 0.15 µg l-1, respectively. The good validation criteria results allowed the method to be used in the quantification of PEN G in real samples.

Alkaline-promoted regulation of the peroxidase-like activity of Ni/Co LDHs and development bioassays.

Nanozymes' activities could be regulated by a simple and effective pH change in an in situ manner. In this work, for the first time, the peroxidase-like activity of Ni/Co layered double hydroxides (LDHs) was regulated via the alkaline-promoted reaction of fluorogenic substrate homovanillic acid and H2O2, and a promising tool for pH sensing was developed over the pH range of 8.3-9.6. As peroxidase nanozyme model, Ni/Co LDHs showed ease of preparation, low-cost, and water-solubility, which played an important role in this luminescence system. Based on the pH-dependent regulation of the Ni/Co LDHs activity, we constructed the bioassay platform for the determination urea, urease, penicillin G, and penicillinase with a wide linear range of 17-1000 µM, 3.3-270 mU mL-1, 3.3-1300 µM and 3.3-100 mU mL-1, respectively. This study not only demonstrated the alkaline-promoted modulation the nanozymes' activities, but also established a facile approach to develop novel bioassays.

Rapid and Highly Efficient Detection of Ultra-low Concentration of Penicillin G by Gold Nanoparticles/Porous Silicon SERS Active Substrate.

A new method for the detection of ultra-low concentration of penicillin G (PG) antibiotic was innovated using gold nanoparticles/porous silicon (AuNPs/PSi) SERS active substrate. PSi was employed as a template and a reducing agent to deposited aggregated AuNPs with a high density of hot spot regions. A highly enhancement performance and reproducible AuNPs/PSi SERS substrate was fabricated. The AuNPs/PSi SERS substrate was investigated for detection PG drug at different concentrations ranging from 10-3 to 10-9 M. The results showed that the proposed AuNPs/PSi SERS substrate provide an efficient way for detection the lowest concentration of PG. The adsorption process of the PG drug on the surface of the AuNPs/PSi was investigated, it was found that PG was close to the surface of AuNPs/PSi through the carboxylate group. The enhancement factor (EF) of 5 × 107 and a 4.5% relative standard deviation of reproducibility were obtained at an ultra-low PG concentration of 10-9 M. The influence of the pH value on the EF for PG antibiotic under acidic and alkaline conditions (EFpH) was studied, it was shown that the highest EFpH with efficient activity toward PG was obtained at pH = 5.

Determination of the intramammary dose of benzylpenicillin required to maintain an adequate concentration in the milk to inhibit Gram-positive bacteria in the clinically normal udder for 24 hr.

The aim of this study was to determine the intramammary dose of benzylpenicillin required to maintain a concentration in the milk above the MIC for the Gram-positive bacteria that cause mastitis. The product used in this study was a commercially available procaine benzylpenicillin in an oily suspension with micronized particles. Three dose levels were used: 200,000, 300,000, and 600,000 IU. Concentrations of benzylpenicillin in cow milk and plasma were determined after a single intramammary dose was administered into one quarter of each of the five cows in each treatment group. Samples were analyzed using an HPLC-MS/MS method, which was validated during the study. Concentrations in the milk were well above the MIC for the target pathogens for all doses tested. There was a linear dose-dependent increase in the mean AUCs of benzylpenicillin concentrations in plasma and milk. At the first milking, 12 hr after dosing, there was a significant difference between the mean milk benzylpenicillin concentrations in cows treated with a dose of 600,000 IU, and those treated with 200,000 or 300,000 IU. Although this study shows a linear relationship between the dose of procaine benzylpenicillin administered and the concentration in the milk in the healthy udder, it would be useful to conduct studies on cows with mastitis to define the optimum dose and duration of intramammary treatment with benzylpenicillin.

Investigation of the Persistence of Penicillin G and Dihydrostreptomycin Residues in Milk of Lactating Buffaloes ( Bubalus bubalis) Using Ultra-High-Performance Liquid Chromatography and Tandem Mass Spectrometry.

The purpose of this research was to evaluate the persistence of penicillin G and dihydrostreptomycin in milk of lactating buffaloes following intramuscular injection of procaine penicillin G (200000 IU/mL) and dihydrostreptomycin sulfate (250 mg/mL) every 24 h for 3 days. Milk samples were collected twice daily up to the 13th milking post-treatment and analyzed by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry. The analytical method has been validated according to Commission Decision 2002/657/EC. The highest concentrations of penicillin G (275 µg kg-1) and dihydrostreptomycin (220.5 µg kg-1) were detected in the milk of the first milkings post-treatment, and levels were below the maximum residue limit of 4 and 200 µg kg-1 in all treated buffaloes at milkings 12 and 2, respectively. The results of this study demonstrate that a nine-milking withdrawal time set for bovine milk was not adequate for depletion of penicillin G in lactating buffaloes.

Acute and chronic toxicity assessment of benzylpenicillin G residue in heat-treated animal food products.

The current level of penicillin use and its persisting residue in livestock is potentially concerning; the toxicity of penicillin residue in heat-treated animal food products (HAFP) is yet to be elucidated. In this study, the acute and chronic toxicity of benzylpenicillin G (BPG) residue in HAFP was investigated in a mouse model. The calculated LD50 of BPG heated to cooking temperature (BPHCT) was 933.04 mg kg-1 [b.w.] intraperitoneally corresponding to 3.75 times lower than its prototype. Mice fed on the experimental diet containing heat-treated beef with high BPG levels for 6 months displayed a reduction in body weight and altered serum values indicating for liver and renal function. Further, the organ ratios of intestinal and spleen were increased. Histopathological changes were observed in the liver, lung and parenchyma testis tissue. BPHCT residue induced sperm aberration and micronucleated polychromatic erythrocytes formation. Present results indicate that prolonged exposure of BPHCT at higher residue levels might have an impact on public health. Importantly the toxic concentrations of BPHCT are relatively high compared with levels that would result from the degradation of antibiotic residues in meat from animals that have received a therapeutic dose of BPG.

Screening of antibiotic residues in fresh milk of Kathmandu Valley, Nepal.

The prevalence of two groups of antibiotics; namely penicillin and sulfonamides was studied in fresh milk available in Kathmandu Valley of Nepal. The milk samples (n = 140) were collected from three different sources; individual farmers, cottage dairies and organized dairies of Kathmandu valley. Qualitative and semi-quantitative analysis with rapid screening kits revealed that 23% samples were positive for antibiotic residues in the fresh milk for penicillin and sulfonamide groups (1-256 µg/kg). High performance liquid chromatography (HPLC) analyses detected 81% samples positive for amoxicillin (68-802 µg/kg), 41% for sulfadimethoxine (31-69 µg/kg), 27% for penicillin G (13-353 µg/kg), and 12% for ampicillin (0.5-92 µg/kg). Due to the precision and accuracy of liquid chromatography method, it detected more positive samples and consequently presented higher prevalence than the rapid screening kits. The antibiotic residues were found above the maximum residue limits that presented serious threat to consumer health and raised a serious concern regarding the implementation and monitoring of international regulations in developing countries.

Development of a ssDNA aptamer for detection of residual benzylpenicillin.

Antibiotics are useful for improving the living conditions of livestock. However, residual antibiotics induce several human diseases such as food-borne illness and infection of carbapenem-resistant Enterobacteriaceae (CRE). In this study, the identification of a benzylpenicillin-specific aptamer was selected by rGO-SELEX (reduced Graphene Oxide-Systematic Evolution of Ligands by EXponential enrichment). A random ssDNA library was incubated with rGO for adsorption and eluted with benzylpenicillin. As a result of the selection process, a DNA aptamer was found that specifically bound to benzylpenicillin with high binding affinity, Kd = 383.4 nM, and had a low limit of detection (LOD) of 9.2 nM. The characterization of the aptamer was performed through the fluorescence recovery signal from rGO surface. In addition, detection of benzylpenicillin was performed in pretreated milk samples, and its detection accuracy was shown to be 100± 10%. This represented that BBA1 was used for fluorescence aptasensor system in real sample. Furthermore, this benzylpenicillin binding aptamer showed high specificity against other antibiotics except for ampicillin. With these advantageous characteristics, we expect that this aptamer could be applied to an on-site detection system for residual benzylpenicillin.

An LC-MS/MS method for the determination of antibiotic residues in distillers grains.

Antibiotics are used in ethanol production to discourage the growth of bacteria that would result in lower ethanol content and a lower quality product. A survey conducted by the FDA (FY 2010 Nationwide Survey of Distillers Grains for Antibiotic Residues, 2009 [1]) revealed that the residues of these antibiotics can remain in the distillers grains (DG) by-product, which is used as an animal feed ingredient. The low levels of antibiotic residues in DG could be a public health concern, as they could lead to antimicrobial resistance. To enable the quantitative determination of these antibiotics (erythromycin, penicillin G, virginiamycin M1 and virginiamycin S1), we developed a sensitive LC-MS/MS method. The residues were extracted from distillers grains with a mixture of acetonitrile and buffer followed by acetonitrile. The combined extract was diluted with water and washed with hexane. An aliquot was cleaned up on an Oasis HLB solid phase extraction cartridge. Extracts were analyzed by LC-tandem mass spectrometry. The method was successfully validated using a variety of different matrices such as corn DG, corn & milo DG, and deoiled corn DG. Absolute recoveries of the analytes ranged from 53 to 106%. Accuracy ranged from 90 to 101% based on calibration by matrix standards. The limits of quantitation and relative standard deviation were all satisfactory to support future surveillance studies.

High sensitive detection of penicillin G residues in milk by surface-enhanced Raman scattering.

The antibiotic residue in animal source foods (milk, meat, etc.) is threatening people's health due to its abusing in livestock breeding more and more seriously. In this study, a simple and sensitive SERS method coupled with a two-step pretreatment process of sample was proposed for the residue detection of penicillin G (PENG) in real milk sample. It can be found that the two-step pretreatment process of sample is an essential procedure for the successful detection of PENG residue in milk, which can effectively avoid interference from other components in the sample and achieve the trace-level detection of PENG residue by SERS. Under the optimal test conditions, the limit of detection of PENG residue is 2.54×10-9mol/L (equal to 0.85µg/kg), which is lower than the standard of the European Union (4µg/kg). And, there is a good linear relationship (R2=0.9902) in the concentration range of 1.0×10-8~1.0×10-3mol/L. By this method, the recovery of PENG residue ranges from 76% to 97% with relative standard deviation between 4.8% and 2.1%. The proposed SERS method can be effectively applied for determination of PENG residue in milk.