Protein circlets as sex pilus subunits.

The largest circular protein structures discovered define a class of transfer proteins acting in bacterial conjugation and type IV secretion. Proteins ranging from 73 to 78 residues with head-to-tail peptide bonds constitute the major subunit of conjugative pili of some type IV secretion systems. Their plasmid-encoded precursors are enzymatically processed and cyclized before being assembled into pili. These extra-cellular surface filaments mediate physical contact between donor and recipient cell or pathogen and host cell. Pili are essential prerequisites for DNA and protein transfer. A membrane-bound signal peptidase-like enzyme is responsible for the circularization reaction. Site-directed mutagenesis and mass spectrometry has been used extensively to unravel the mechanism of the enzyme-substrate interaction of the pilin maturation process.

Tying rings for sex.

The primary component of the sex pilus encoded by IncP (RP4) and Ti plasmids has been identified as a circular pilin protein with a peptide bond between the amino and carboxyl terminus. Here, we review the key experiments that led to this discovery, and the present mechanistic model for pilin-precursor processing and the cyclization reaction. In addition, we discuss the implications for horizontal gene transfer in bacterial conjugation.

Isolation and characterization of BTF-37: chromosomal DNA captured from Bacteroides fragilis that confers self-transferability and expresses a pilus-like structure in Bacteroides spp. and Escherichia coli.

We report the isolation and preliminary characterization of BTF-37, a new 52-kb transfer factor isolated from Bacteroides fragilis clinical isolate LV23. BTF-37 was obtained by the capture of new DNA in the nonmobilizable Bacteroides-Escherichia coli shuttle vector pGAT400DeltaBglII using a functional assay. BTF-37 is self-transferable within and from Bacteroides and also self-transfers in E. coli. Partial DNA sequencing, colony hybridization, and PCR revealed the presence of Tet element-specific sequences in BTF-37. In addition, Tn5520, a small mobilizable transposon that we described previously (G. Vedantam, T. J. Novicki, and D. W. Hecht, J. Bacteriol. 181:2564-2571, 1999), was also coisolated within BTF-37. Scanning and transmission electron microscopy of Tet element-containing Bacteroides spp. and BTF-37-harboring Bacteroides and E. coli strains revealed the presence of pilus-like cell surface structures. These structures were visualized in Bacteroides spp. only when BTF-37 and Tet element strains were induced with subinhibitory concentrations of tetracycline and resembled those encoded by E. coli broad-host-range plasmids. We conclude that we have captured a new, self-transferable transfer factor from B. fragilis LV23 and that this new factor encodes a tetracycline-inducible Bacteroides sp. conjugation apparatus.

matB, a common fimbrillin gene of Escherichia coli, expressed in a genetically conserved, virulent clonal group.

A novel fimbrial type in Escherichia coli was identified and characterized. The expression of the fimbria was associated with the O18acK1H7 clonal group of E. coli, which cause newborn meningitis and septicemia when grown at low temperature; hence, it was named the Mat (meningitis associated and temperature regulated) fimbria. The fimbriae were purified from a fimA::cat sfaA::Gm fliC::St derivative of the O18K1H7 isolate E. coli IHE 3034. The purified Mat fimbrillin had an apparent molecular mass of 18 kDa and did not serologically cross-react with the type 1 or S fimbria of the same strain. The matB gene encoding the major fimbrillin was cloned from the genomic DNA of the fimA::cat sfaA::Gm fliC::St derivative of IHE 3034. The predicted MatB sequence was of 195 amino acids, contained a signal sequence of 22 residues, and did not show significant homology to any of the previously characterized fimbrial proteins. The DNA sequence of matB was 97.8% identical to a region from nucleotides 17882 to 18469 in the 6- to 8-min region of the E. coli K-12 chromosome, reported to encode a hypothetical protein. The 7-kb DNA fragment containing matB of IHE 3034 was found by restriction mapping and partial DNA sequencing to be highly similar to the corresponding region in the K-12 chromosome. Trans complementation of the matB::cat mutation in the IHE 3034 chromosome showed that matB in combination with matA or matC restored surface expression of the Mat fimbria. A total of 27 isolates representing K-12 strains and the major pathogroups of E. coli were analyzed for the presence of a matB homolog as well as for expression of the Mat fimbria. A conserved matB homolog was found in 25 isolates; however, expression of the Mat fimbriae was detected only in the O18acK1H7 isolates. Expression of the Mat fimbria was temperature regulated, with no or a very small amount of fimbriae or intracellular MatB fimbrillin being detected in cells cultivated at 37(o)C. Reverse transcriptase PCR and complementation assays with mat genes controlled by the inducible trc promoter indicated that regulation of Mat fimbria expression involved both transcriptional and posttranscriptional events.

Analysis of the PilQ secretin from Neisseria meningitidis by transmission electron microscopy reveals a dodecameric quaternary structure.

PilQ is a member of the secretin family of outer membrane proteins and is specifically involved in secretion of type IV pili in Neisseria meningitidis, Neisseria gonorrhoeae, and Pseudomonas aeruginosa. The quaternary structure of PilQ from N. meningitidis was analyzed by transmission electron microscopy by using a negative stain. Single particle averaging was carried out with a total data set of 650 individual particles, which produced a projection map generated from 296 particles at an estimated resolution of 2.6 nm. Oligomeric PilQ adopts a donut-like structure with an external ring that is 16.5 nm in diameter surrounding a central cavity that is 6.5 nm in diameter. Self-rotation and power spectrum analysis demonstrated the presence of 12-fold rotational symmetry, showing that PilQ is organized as a ring of 12 identical subunits. A model of the type IV meningococcal pilus fiber, based on the X-ray crystal structure of the N. gonorrhoeae pilin subunit, fitted neatly into the cavity, demonstrating how PilQ could serve as a channel for the growing pilus fiber.

Conjugative pili of IncP plasmids, and the Ti plasmid T pilus are composed of cyclic subunits.

TrbC propilin is the precursor of the pilin subunit TrbC of IncP conjugative pili in Escherichia coli. Likewise, its homologue, VirB2 propilin, is processed into T pilin of the Ti plasmid T pilus in Agrobacterium tumefaciens. TrbC and VirB2 propilin are truncated post-translationally at the N terminus by the removal of a 36/47-residue leader peptide, respectively. TrbC propilin undergoes a second processing step by the removal of 27 residues at the C terminus by host-encoded functions followed by the excision of four additional C-terminal residues by a plasmid-borne serine protease. The final product TrbC of 78 residues is cyclized via an intramolecular covalent head-to-tail peptide bond. The T pilin does not undergo additional truncation but is likewise cyclized. The circular structures of these pilins, as verified by mass spectrometry, represent novel primary configurations that conform and assemble into the conjugative apparatus.

Purification and characterization of thin pili of IncI1 plasmids ColIb-P9 and R64: formation of PilV-specific cell aggregates by type IV pili.

Thin pili of the closely related IncI1 plasmids ColIb-P9 and R64 are required only for liquid mating and belong to the type IV family of pili. They were sedimented by ultracentrifugation from culture medium in which Escherichia coli cells harboring ColIb-P9- or R64-derived plasmids had been grown, and then the pili were purified by CsCl density gradient centrifugation. In negatively stained thin pilus samples, long rods with a diameter of 6 nm, characteristic of type IV pili, were observed under an electron microscope. Gel electrophoretic analysis of purified ColIb-P9 thin pili indicated that thin pili consist of two kinds of proteins, pilin and the PilV protein. Pilin was demonstrated to be the product of the pilS gene. Pilin was first synthesized as a 22-kDa prepilin from the pilS gene and subsequently processed to a 19-kDa protein by the function of the pilU product. The N-terminal amino group of the processed protein was shown to be modified. The C-terminal segments of the pilV products vary among six or seven different types, as a result of shufflon DNA rearrangements of the pilV gene. These PilV proteins were revealed to comprise a minor component of thin pili. Formation of PilV-specific cell aggregates by ColIb-P9 and R64 thin pili was demonstrated and may play an important role in liquid mating.

Bacterial adhesion pili are heterologous assemblies of similar subunits.

P-pili on uropathogenic bacteria are 68-A-diameter rods typically 1 microm in length. These structures project from the outer membrane of Escherichia coli, and contain on their distal tip a thin fibrillum, 25 A in diameter and 150 A long, displaying an adhesin protein responsible for the binding of the bacterium to the surface of epithelial cells lining the urinary tract. Operationally, it is possible to identify three morphologically distinct states of the 68-A-diameter P-pili rods, based on the degree of curvature each can adopt. These states are designated "straight," "curved," and "highly curved." The rods can also be unwound to form thin "threads" that are very similar to the tip fibrillae. Electron microscope data are used to distinguish among these four morphological states and to define limits on the shapes of the pilus proteins. The mechanical properties of the PapA polymers are assessed, and implications of rod polymorphism for pilus function are discussed. A wide variety of data are considered in light of the possibility that all pilins are similar in molecular architecture, with specific differences designed to optimize their specialized functions in the pilus assembly.

Differential expression of the ToxR regulon in classical and E1 Tor biotypes of Vibrio cholerae is due to biotype-specific control over toxT expression.

The two major disease-causing biotypes of Vibrio cholerae, classical and El Tor, exhibit differences in their epidemic nature. Their behavior in the laboratory also differs in that El Tor strains produce two major virulence factors, cholera toxin (CT) and the toxin coregulated pilus (TCP), only under very restricted growth conditions, whereas classical strains do so in standard laboratory medium. Expression of toxin and TCP is controlled by two activator proteins, ToxR and ToxT, that operate in cascade fashion with ToxR controlling the synthesis of ToxT. Both biotypes express equivalent levels of ToxR, but only classical strains appear to express ToxT when grown in standard medium. In this report we show that restrictive expression of CT and TCP can be overcome in El Tor strains by expressing ToxT independently of ToxR. An El Tor strain lacking functional ToxT does not express CT or TCP, ruling out existence of a cryptic pathway for virulence regulation in this biotype. These results may have implications for understanding the evolution of El Tor strains toward reduced virulence with respect to classical strains.

Bacterial conjugation mediated by plasmid RP4: RSF1010 mobilization, donor-specific phage propagation, and pilus production require the same Tra2 core components of a proposed DNA transport complex.

DNA transfer by bacterial conjugation requires a mating pair formation (Mpf) system that specifies functions for establishing the physical contact between the donor and the recipient cell and for DNA transport across membranes. Plasmid RP4 (IncP alpha) contains two transfer regions designated Tra1 and Tra2, both of which contribute to Mpf. Twelve components are essential for Mpf, TraF of Tra1 and 11 Tra2 proteins, TrbB, -C, -D, -E, -F, -G, -H, -I, -J, -K, and -L. The phenotype of defined mutants in each of the Tra2 genes was determined. Each of the genes, except trbK, was found to be essential for RP4-specific plasmid transfer and for mobilization of the IncQ plasmid RSF1010. The latter process did not absolutely require trbF, but a severe reduction of the mobilization frequency occurred in its absence. Transfer proficiency of the mutants was restored by complementation with defined Tra2 segments containing single trb genes. Donor-specific phage propagation showed that traF and each of the genes encoded by Tra2 are involved. Phage PRD1, however, still adsorbed to the trbK mutant strain but not to any of the other mutant strains, suggesting the existence of a plasmid-encoded receptor complex. Strains containing the Tra2 plasmid in concert with traF were found to overexpress trb products as well as extracellular filaments visualized by electron microscopy. Each trb gene and traF are needed for the formation of the pilus-like structures. The trbK gene, which is required for PRD1 propagation and for pilus production but not for DNA transfer on solid media, encodes the RP4 entry-exclusion function. The components of the RP4 Mpf system are discussed in the context of related macromolecule export systems.

Functional implications of the expression of PilC proteins in meningococci.

Multiple forms of PilC were found in Neisseria meningitidis (Nm) strains isolated from the oropharynx, blood or cerebrospinal fluid expressing either Class I or Class II pili. PilC expression was observed less frequently in case as opposed to carrier isolates. Moreover, PilC and pili were not always co-expressed. Several heavily piliated strains had no detectable PilC protein as determined by Western blotting using an antiserum previously used to detect such proteins in adhesive variants (Nassif et al., 1994). Serogroup B strain MC58 produced large numbers of pili, but expressed barely detectable amounts of PilC. A clonal variant of this strain with increased expression of PilC concurrently exhibited increased adherence to Chang conjunctival epithelial cells and human umbilical vein endothelial cells (Huvecs), but with more rapid binding to the former. No alteration in pilin sequence occurred in this variant, suggesting the involvement of PilC in increased adhesion. A Pil- backswitcher isolated from the hyper-adherent variant was PilC+ but was non-adherent, indicating that any PilC adherence function requires pilus expression. Parental variant (low PilC) produced pili in bundles that were easily detached from the bacterial surface and were frequently associated with Huvec surfaces after bacteria had been sheared off, but pili infrequently replaced bacteria during infection with the PilC-expressing variant. The hyper-adherent variant, which appeared to produce morphologically distinct pilus bundles, was able to withstand considerable shearing force and remained firmly attached to Huvecs. This raises the possibility that the observed hyper-adherence may arise from better anchorage of pili to the bacterial surface in addition to increased adhesion to some host cell surfaces.

Production and characterisation of monoclonal antibodies against pyelonephritis-associated P-pili of Escherichia coli.

Pyelonephritis-associated P-pili (PAP) of Escherichia coli O6,H(-),K1(-),F12,haemolysin(-) were purified by salt precipitation and affinity chromatography using Synsorb P1. Purified PAP showed a single band with a molecular weight of 18 kDa by electrophoretic analysis. A monoclonal antibody (mAb) was produced by fusion of the PAI myeloma cell line with splenic lymphocytes from BALB/c mice immunised with the purified PAP. The mAb was of IgM class with kappa light chains and reacted with a 18-kDa moeity of the salt precipitate; the epitope was present near the apical part of the pilus filaments. The mAb reacted with PAP in both immunofluorescence and haemagglutination tests when 108 strains isolated from urine samples were tested; the two tests were in agreement for 202 of 204 strains isolated from faecal samples.