Antifungal activity of poly(lactic acid) nanofibers containing the essential oil from Corymbia citriodora Hook or the monoterpenes ß-citronellol and citronellal against mycotoxigenic fungi.

Food contamination by mycotoxigenic fungi is one of the principal factors that cause food loss and economic losses in the food industry. The objective of this work was to incorporate the essential oil from Corymbia citriodora Hook and its constituents citronellal and ß-citronellol into poly(lactic acid) nanofibers; to characterize the nanofibers by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy and differential scanning calorimetry; to evaluate the antifungal activity by the fumigation method; to evaluate the antimycotoxigenic activity against Aspergillus carbonarius, Aspergillus ochraceus, Aspergillus westerdijkiae, Aspergillus flavus, and Aspergillus parasiticus; and to evaluate the morphology of these microorganisms. All the nanofibers had a regular, smooth, and continuous morphology. FTIR analyses confirmed that the active ingredients were incorporated into the polymer matrix. All samples exhibited antifungal and ochratoxigenic inhibitory activities of up to 100% and 99%, respectively, with the best results observed for (PLA + 30 wt% ß-citronellol) nanofibers and (PLA + 30 wt% citronellal) nanofibers. However, 100% inhibition of the production of aflatoxin B1 and B2 was not observed. The images obtained by SEM indicated that the nanofibers caused damage to the hyphae, caused a decrease in the production of spores, and caused deformation, rupture, and non-formation of the conid head, might be an alternative for the control of mycotoxigenic fungi.

A promising poly (e-caprolactone)/graphene-based scaffold as an antibacterial in regenerating bone tissue.

Scaffolds are 3D biomaterials that provide an environment for cell regeneration. In the context of bone remodeling, poly(e-caprolactone) (PCL) combined with graphene has been developed as the scaffold. It is imperative for scaffolds to possess antibacterial properties in order to properly reduce the risk of potential infections.Therefore, this study aims to analyze the antibacterial characteristics of PCL/graphene scaffolds against Staphylococcus aureus (S. aureus) and Porphyromonas gingivalis (P. gingivalis) in vitro. In this study, five different groups were used, including PCL (K-), Amoxicillin (K+), PCL/Graphene 0.5 wt%, PCL/graphene 1 wt% and PCL/Graphene 1.5 wt%. All experiments were performed in triplicates and were repeated three times, and the diffusion method by Kirby-Bauer test was used. The disc was incubated with S. aureus and P. gingivalis for 24 hours and then the diameter of the inhibition zone was measured. The results showed that the PCL/graphene scaffolds exhibited dose-dependent antibacterial activity against S. aureus and P. gingivalis. The inhibition zone diameter (IZD) against S. aureus of PCL/graphene 1 wt% was 9.53 ± 0.74 mm, and increased to 11.93 ± 0.92 mm at a concentration of 1.5 wt% of graphene. The PCL/graphene scaffold with 1.5 wt% exhibited a greater inhibitory effect, with an IZD of 12.56 ± 0.06 mm against P. gingivalis, while the inhibitory activity of the 1 wt% variant was relatively lower at 10.46 ± 0.24 mm. The negative control, PCL, and PCL/graphene 0.5 wt% exhibited no antibacterial activity sequentially (p = 1). Scaffolds of poly(e-caprolactone)/graphene exhibited an antibacterial activity at 1, and 1.5 wt% on S. aureus and P. gingivalis. The antibacterial properties of this scaffold make it a promising candidate for regenerating bone tissue.

Lysine grafted poly(lactic acid): An intrinsically antimicrobial polymer.

Nosocomial infections or healthcare-associated infections, normally develops after the healthcare treatment in the hospital. Most of them are caused by infected medical devices. Plastics are the most common materials for manufacturing these devices because of their good processability, sterilization efficacy, ease of handling and harmlessness, however, it usually do not display antimicrobial properties. Here, in order to infer antimicrobial activity to poly(lactic acid), it was modified by maleation, followed by l-lysine grafting to its structure. The chemical modifications were confirmed by FTIR and 1H NMR analysis, indicating the success of the reactions. The antimicrobial activity was tested using Escherichia coli and Staphylococcus aureus and the results showed that the sample was capable of inhibiting about 99 % of the S. aureus growth by contact. The samples cytotoxicity was also tested using the L929 mouse cells and the results indicated no cytotoxic effect. These results indicated the sample antimicrobial potential, without affect the normal eukaryotic cells. In addition, the processability of the modified PLA (PLA-g-Lys) was improved without compromising its mechanical properties, as shown by thermal analysis and tensile tests. Thus, this novel PLA derivative can be seen as a promising material for future applications in the manufacturing of biomedical devices.

Lychnopholide loaded in surface modified polylactide nanocapsules (LYC-PLA-PEG-NC) cure mice infected by Trypanosoma cruzi strain a prototype of resistance to benznidazole and nifurtimox: First insights of its mechanism of action.

Chagas disease (CD) remains neglected and causes high morbidity and mortality. The great difficulty is the lack of effective treatment. The current drugs cause side effects and have limited therapeutic efficacy in the chronic phase. This study aims to fulfil some gaps in studies of the natural substance lychnopholide nanoencapsulated LYC-PLA-PEG-NC (LYC-NC) and free (Free-LYC): the activity in epimastigotes and amastigotes to determine its selectivity index (SI), the therapeutic efficacy in mice infected with Colombian Trypanosoma cruzi strain and insight of the mechanism of LYC-NC action on T. cruzi. The SI was obtained by calculation of the ratio between the IC50 value toward H9c2 cells divided by the IC50 value in the anti-T. cruzi test. Infected Swiss mice were treated with 2 and 12 mg/kg/day via intravenous and oral, respectively, and the therapeutic efficacy was determined. The IC50 of LYC-NC and Free-LYC for epimastigotes of T. cruzi were similar. Both were active against amastigotes in cell culture, particularly Free-LYC. The SI of LYC-NC and Free-LYC were 45.38 and 32.11, respectively. LYC-NC 2 and 12 mg/kg/day cured parasitologically, 62.5% and 80% of the animals, respectively, infected with a strain resistant to treatment. The fluorescent NC was distributed in the cardiomyocyte cytoplasm, infected or not, and interacted with the trypomastigotes. Together, these results represent advances in demonstrating LYC as a potent new therapeutic option for treating CD.

Preparation and evaluation of cytotoxic potential of paclitaxel containing poly-3-hydroxybutyrate-co-3-hydroxyvalarate (PTX/PHBV) nanoparticles.

Paclitaxel (PTX) is a potent anticancer drug. In the present study, PTX was loaded in poly-3-hydroxybutyrate-co-3-hydroxyvalarate (PHBV) to fabricate the PTX/PHBV (drug-loaded) nanoparticles via the nanoprecipitation method. Blank PHBV nanoparticles were also prepared. The drug-encapsulation efficiency of PTX/PHBV nanoparticles was 45±0.4%. The PTX/PHBV nanoparticles exhibited a pH-sensitive release profile and followed a quasi-Fickian diffusion mechanism. Cytotoxic properties of PHBV and PTX/PHBV nanoparticles were checked against the MCF-7 and Caco-2 cell lines. The PHBV nanoparticle did not inhibit the proliferation of MCF-7 and Caco-2 cell lines, thus depicting their non-toxic and biocompatible nature. On the other hand, the PTX/PHBV nanoparticles demonstrated 1.03-fold higher cytotoxicity and 1.61-fold enhanced apoptosis after treatment with the PTX/PHBV nanoparticles versus free PTX. In summary, the PHBV nanoparticles could be a potential candidate for the delivery of PTX for cancer treatment.

Active packaging of poly(lactic acid) nanofibers and essential oils with antifungal action on table grapes.

The table grape is a non-climateric fruit that is very susceptible to fungal contamination, in addition to suffering an accelerated loss of quality during storage. The in vitro and in grape antifungal and antiocratoxigenic effects of the essential oils from Alpinia speciosa and Cymbopogon flexuosus against Aspergillus carbonarius and Aspergillus niger were studied. The oils were encapsulated in poly(lactic acid) (PLA) nanofibers as a potential active packaging to be applied to control the degradation of grapes stored during the post-harvest period. Fungal proliferation and ochratoxin A synthesis in A. carbonarius and A. niger decreased in the presence of the active packaging. However, the nanofiber containing the essential oil from C. flexuosus was more efficient in providing a fungicidal effect against A. carbonarius (10% and 20%) and A. niger (20%). In addition, weight loss and color changes were controlled and the parameters of acidity, °Brix, softening and the texture of the grape were maintained. A very small mass loss of the essential oils encapsulated in nanofibers was observed by thermogravimetric analysis, showing that the nanofiber was efficient in enabling the controlled release. The quality and safety of table grapes were maintained for longer periods of storage in the presence of active packaging, so the incorporation of these oils in nanofibers can be a promising way to increase the shelf life of grapes.

High Doses of Caffeine Increase Muscle Strength and Calcium Release in the Plasma of Recreationally Trained Men.

The effects of acute caffeine supplementation on muscular strength remain unclear. We examined the effects of two different doses of caffeine on muscle strength and calcium in plasma compared to placebo using a crossover, randomized, double-blind, placebo-controlled design. Twenty-one (n = 21) recreationally resistance-trained participants were randomly assigned into three experimental conditions: 6 mg·kg bw−1 of caffeine (CF6); 8 mg·kg bw−1 of caffeine (CF8); or placebo (PLA), with a 7-day washout period between conditions. Muscular strength assessments were made for both upper (bench press) and lower body muscles (squat and deadlift). Calcium release in plasma was measured on five different occasions. Bench press (CF8: 100.1 ± 1.9 kg; PLA: 94.2 ± 2.5 kg), deadlift (CF8: 132.8 ± 3.5 kg; PLA: 120.7 ± 5.7 kg), and squat (CF8: 130.1 ± 4.9 kg; PLA 119.4 ± 5.4 kg) strength were all significantly (p < 0.001) improved in CF8 compared to PLA. Calcium release in plasma was significantly increased in CF8, whereas no changes were observed in CF6 or PLA. Overall, 8 mg·kg bw−1 of caffeine appears to be an effective dose to optimize upper and lower body muscular strength and calcium release in recreationally trained participants.

Development and characterization of antioxidant and antimicrobial poly (butylene adipate-co-terephtalate) (PBAT) film incorporated with oregano essential oil and applied in sliced mozzarella cheese.

The objective was to develop and characterize biodegradable films with antimicrobial and antioxidant action, using poly(butylene adipate-co-terephthalate) (PBAT) incorporated with OEO - essential oil (Origanum vulgare). The degradation temperature of the OEO increased after incorporation into the PBAT matrix, however, the degradation of the matrix did not undergo considerable changes. The films showed increase in elongation and modulus of elasticity with presence of OEO, however, it reduced the maximum tension. The permeability of the films was reduced with OEO presence. The spectra (FTIR) showed the presence of the functional groups attributed to the bioactive compounds (Carvacrol) of OEO. The films presented high antioxidant activity and effective antimicrobial action, reducing Staphylococcus aureus in 53 days and psychrotrophic microorganisms in up to 28 days of storage. The films showed to be efficient with antioxidant activity and antimicrobial action with indication to be used as packaging of sliced mozzarella cheese.

Biocompatibility Assessment of Polylactic Acid (PLA) and Nanobioglass (n-BG) Nanocomposites for Biomedical Applications.

Scaffolds based on biopolymers and nanomaterials with appropriate mechanical properties and high biocompatibility are desirable in tissue engineering. Therefore, polylactic acid (PLA) nanocomposites were prepared with ceramic nanobioglass (PLA/n-BGs) at 5 and 10 wt.%. Bioglass nanoparticles (n-BGs) were prepared using a sol-gel methodology with a size of ca. 24.87 ± 6.26 nm. In addition, they showed the ability to inhibit bacteria such as Escherichia coli (ATCC 11775), Vibrio parahaemolyticus (ATCC 17802), Staphylococcus aureus subsp. aureus (ATCC 55804), and Bacillus cereus (ATCC 13061) at concentrations of 20 w/v%. The analysis of the nanocomposite microstructures exhibited a heterogeneous sponge-like morphology. The mechanical properties showed that the addition of 5 wt.% n-BG increased the elastic modulus of PLA by ca. 91.3% (from 1.49 ± 0.44 to 2.85 ± 0.99 MPa) and influenced the resorption capacity, as shown by histological analyses in biomodels. The incorporation of n-BGs decreased the PLA crystallinity (from 7.1% to 4.98%) and increased the glass transition temperature (Tg) from 53 °C to 63 °C. In addition, the n-BGs increased the thermal stability due to the nanoparticle's intercalation between the polymeric chains and the reduction in their movement. The histological implantation of the nanocomposites and the cell viability with HeLa cells higher than 80% demonstrated their biocompatibility character with a greater resorption capacity than PLA. These results show the potential of PLA/n-BGs nanocomposites for biomedical applications, especially for long healing processes such as bone tissue repair and avoiding microbial contamination.

Biodegradable Nanoparticles Loaded with Levodopa and Curcumin for Treatment of Parkinson's Disease.

Background: Parkinson's disease (PD) is the second most common age-related neurodegenerative disorder. Levodopa (L-DOPA) remains the gold-standard drug available for treating PD. Curcumin has many pharmacological activities, including antioxidant, anti-inflammatory, antimicrobial, anti-amyloid, and antitumor properties. Copolymers composed of Poly (ethylene oxide) (PEO) and biodegradable polyesters such as Poly (ε-caprolactone) (PCL) can self-assemble into nanoparticles (NPs). This study describes the development of NH2-PEO-PCL diblock copolymer positively charged and modified by adding glutathione (GSH) on the outer surface, resulting in a synergistic delivery of L-DOPA curcumin that would be able to pass the blood-brain barrier. Methods: The NH2-PEO-PCL NPs suspensions were prepared by using a nanoprecipitation and solvent displacement method and coated with GSH. NPs were submitted to characterization assays. In order to ensure the bioavailability, Vero and PC12 cells were treated with various concentrations of the loaded and unloaded NPs to observe cytotoxicity. Results: NPs have successfully loaded L-DOPA and curcumin and were stable after freeze-drying, indicating advancing into in vitro toxicity testing. Vero and PC12 cells that were treated up to 72 h with various concentrations of L-DOPA and curcumin-loaded NP maintained high viability percentage, indicating that the NPs are biocompatible. Conclusions: NPs consisting of NH2-PEO-PCL were characterized as potential formulations for brain delivery of L-DOPA and curcumin. The results also indicate that the developed biodegradable nanomicelles that were blood compatible presented low cytotoxicity.

PLA/Hydroxyapatite scaffolds exhibit in vitro immunological inertness and promote robust osteogenic differentiation of human mesenchymal stem cells without osteogenic stimuli.

Bone defects stand out as one of the greatest challenges of reconstructive surgery. Fused deposition modelling (FDM) allows for the printing of 3D scaffolds tailored to the morphology and size of bone damage in a patient-specific and high-precision manner. However, FDM still suffers from the lack of materials capable of efficiently supporting osteogenesis. In this study, we developed 3D-printed porous scaffolds composed of polylactic acid/hydroxyapatite (PLA/HA) composites with high ceramic contents (above 20%, w/w) by FDM. The mechanical properties of the PLA/HA scaffolds were compatible with those of trabecular bone. In vitro degradation tests revealed that HA can neutralize the acidification effect caused by PLA degradation, while simultaneously releasing calcium and phosphate ions. Importantly, 3D-printed PLA/HA did not induce the upregulation of activation markers nor the expression of inflammatory cytokines in dendritic cells thus exhibiting no immune-stimulatory properties in vitro. Evaluations using human mesenchymal stem cells (MSC) showed that pure PLA scaffolds exerted an osteoconductive effect, whereas PLA/HA scaffolds efficiently induced osteogenic differentiation of MSC even in the absence of any classical osteogenic stimuli. Our findings indicate that 3D-printed PLA scaffolds loaded with high concentrations of HA are most suitable for future applications in bone tissue engineering.

3D printing of poly(butylene adipate-co-terephthalate) (PBAT)/niobium containing bioactive glasses (BAGNb) scaffolds: Characterization of composites, in vitro bioactivity, and in vivo bone repair.

This study aimed to produce poly(butylene adipate-co-terephthalate) (PBAT)/niobium containing bioactive glasses (BAGNb) composites scaffolds produced by fused deposition modeling (FDM) printing and evaluate their physicochemical and biological properties in vitro and in vivo. The composite filaments were produced by melt-extrusion with the addition of 10 wt% of BAGNb (PBAT/BAGNb). Filaments without BAGNb were produced as the control group (PBAT). The filaments were characterized and were used to produce 3D-printed scaffolds using FDM. The scaffolds' structure and surface properties were assessed. In vitro cell, proliferation, and cell mineralization analysis were performed. In vivo data was obtained in the rat femur model (n = 10), and the bone repair was assessed after 15, 30, and 60 postoperative days. The printed structures presented 69.81% porosity for the PBAT/BAGNb group and 74.54% for the PBAT group. Higher cell mineralization was observed for the PBAT/BAGNb group. The in vivo data showed that the PBAT/BAGNb presented new bone formation comparable to positive controls. The combination of PBAT and BAGNb in 3D-printed scaffolds may be an alternative to produce bioactive materials with controllable shapes and properties for bone regeneration treatments.

Effects of a Cereal Bar with a Combination of Phytoestrogens on the Climacteric Symptoms: A Placebo-Controlled, Randomized Trial.

OBJECTIVE: This study evaluated whether the consumption of a cereal bar combining different phytoestrogens could contribute to the reduction of climacteric symptoms in women. METHODS: This is a clinical, prospective, randomized, simple-blind trial. Forty-eight women, aged 40-65 years, with climacteric symptoms, from a city in southwestern Paraná, Brazil. Participants were randomly assigned into two groups; Phytoestrogens group (PHY = 24), which received for 90-day period a cereal bar containing 80.73 milligrams of soybean and flaxseed phytoestrogens, and the placebo group (PLA = 24), which consumed rice flakes biscuit. Clinical, sociodemographic and anthropometric data were collected and climacteric symptoms were assessed using the Kupperman Index (KI). RESULTS: Forty-three women were analyzed (PHY = 21 and PLA = 22). There were significant reductions in the overall KI score in both groups at the end of the intervention period (p < 0.05). However, the comparison between the groups using linear regression models presented expressively better symptom improvement in the PHY group -6.43 over time (95% CI: -11.6; -1.26; p < 0.05) KI points, with perimenopausal -15.15 (95% CI: -28.95; -1.35) and postmenopausal women -19.34 (95% CI: -33.68; -4.99) showed considerably greater reductions in symptoms at the end of the intervention period compared to premenopausal women. There was also significant reduction in symptoms of hot flushes, paresthesia, sexual complaints, insomnia and melancholy. CONCLUSION: The consumption of a cereal bar containing phytoestrogens was able to improve the symptoms of climacteric syndrome.

Long-Term Evaluation of Poly(lactic acid) (PLA) Implants in a Horse: An Experimental Pilot Study.

In horses, there is an increasing interest in developing long-lasting drug formulations, with biopolymers as viable carrier alternatives in addition to their use as scaffolds, suture threads, screws, pins, and plates for orthopedic surgeries. This communication focuses on the prolonged biocompatibility and biodegradation of PLA, prepared by hot pressing at 180 °C. Six samples were implanted subcutaneously on the lateral surface of the neck of one horse. The polymers remained implanted for 24 to 57 weeks. Physical examination, plasma fibrinogen, and the mechanical nociceptive threshold (MNT) were performed. After 24, 28, 34, 38, and 57 weeks, the materials were removed for histochemical analysis using hematoxylin-eosin and scanning electron microscopy (SEM). There were no essential clinical changes. MNT decreased after the implantation procedure, returning to normal after 48 h. A foreign body response was observed by histopathologic evaluation up to 38 weeks. At 57 weeks, no polymer or fibrotic capsules were identified. SEM showed surface roughness suggesting a biodegradation process, with an increase in the median pore diameter. As in the histopathological evaluation, it was not possible to detect the polymer 57 weeks after implantation. PLA showed biocompatible degradation and these findings may contribute to future research in the biomedical area.

Enhanced ligand-free attachment of osteoblast to poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanoparticles.

Polymeric nanoparticles have previously been used as substrates for cell attachment and proliferation due to their ability to mimic the extracellular matrix, but in general, they require surface chemical modifications to achieve this purpose. In this study, polymeric nanoparticles were developed and used without any matrix ligands functionalized on their surface to promote cell attachment and proliferation of human osteoblasts (MG63s). First, telechelic, reduced molar mass and diol-functionalized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was prepared by transesterification using ethylene glycol. Then, PHBV-diol was used to prepare biodegradable nanoparticles via the solvent evaporation technique. MG63s were cultured in the presence of PHBV nanoparticles and growth kinetics were compared to that on tissue culture polystyrene (TCPS). Cell attachment on non-tissue culture polystyrene pre-coated with nanoparticles was assessed and compared to attachment on TCPS. The cell attachment study demonstrated that cells readily attached and were well spread onto the nanoparticle surfaces compared to non-tissue culture polystyrene. These findings reveal the potential of PHBV nanoparticles for cell attachment and growth to be used in tissue engineering.

Self-Sterilizing 3D-Printed Polylactic Acid Surfaces Coated with a BODIPY Photosensitizer.

Herein, we report the use of polylactic acid coated with a halogenated BODIPY photosensitizer (PS) as a novel self-sterilizing, low-cost, and eco-friendly material activated with visible light. In this article, polymeric surfaces were 3D-printed and treated with the PS using three simple methodologies: spin coating, aerosolization, and brush dispersion. Our studies showed that the polymeric matrix remains unaffected upon addition of the PS, as observed by dynamic mechanical analysis, Fourier transform infrared, scanning electron microscopy (SEM), and fluorescence microscopy. Furthermore, the photophysical and photodynamic properties of the dye remained intact after being adsorbed on the polymer. This photoactive material can be reused and was successfully inactivating methicillin-resistant Staphylococcus aureus and Escherichia coli in planktonic media for at least three inactivation cycles after short-time light exposure. A real-time experiment using a fluorescence microscope showed how bacteria anchored to the antimicrobial surface were inactivated within 30 min using visible light and low energy. Moreover, the material effectively eradicated these two bacterial strains on the first stage of biofilm formation, as elucidated by SEM. Unlike other antimicrobial approaches that implement a dissolved PS or non-sustainable materials, we offer an accessible green and economic alternative to acquire self-sterilizing surfaces with any desired shape.

Laser therapy increases the proliferation of preosteoblastic MC3T3-E1 cells cultured on poly(lactic acid) films.

This study aimed to verify the efficacy of low-level laser irradiation (LLLI) on the proliferation of MC3T3-E1 preosteoblasts cultured on poly(lactic acid) (PLA) films. The produced films were characterized by contact angle tests, scanning electron microscopy (SEM), atomic force microscopy, differential scanning calorimetry, and X-ray diffraction. The MC3T3-E1 cells were cultured as three different groups: Control-cultured on polystyrene plastic surfaces; PLA-cultured on PLA films; and PLA + Laser-cultured on PLA films and submitted to laser irradiation (660 nm; 30 mW; 4 J/cm2 ). Cell proliferation was analyzed by Trypan blue and Alamar blue assays at 24, 48, and 72 h after irradiation. Cell viability was assessed by Live/Dead assay, apoptosis-related events were evaluated by Annexin V/propidium iodide (PI) expression, and cell cycle events were analyzed by flow cytometry. Cell morphology on the surface of films was assessed by SEM. Cell counting and biochemical assay results indicate that the PLA + Laser group exhibited higher proliferation (p < 0.01) when compared with the Control and PLA groups. The Live/Dead and Annexin/PI assays indicate increased cell viability in the PLA + Laser group that also presented a higher percentage of cells in the proliferative cell cycle phases (S and G2/M). These findings were also confirmed by the higher cell density observed in the irradiated group through SEM images. The evidence from this study supports the idea that LLLI increases the proliferation of MC3T3-E1 cells on PLA surfaces, suggesting that it can be potentially applied in bone tissue engineering.

Fabrication and Characterization of a Novel Herbicide Delivery System with Magnetic Collectability and Its Phytotoxic Effect on Photosystem II of Aquatic Macrophyte.

The use of nano- and microparticles as a release system for agrochemicals has been increasing in agricultural sector. However, the production of eco-friendly and smart carriers that can be easily handled in the environment is still a challenge for this technology. In this context, we have developed a biodegradable release system for the herbicide atrazine with magnetic properties. Herein, we investigated the (a) physicochemical properties of the atrazine-loaded magnetic poly(ε-caprolactone) microparticles (MPs:ATZ), (b) in vitro release kinetic profile of the herbicide, and (c) phytotoxicity toward photosynthesis in the aquatic fern Azolla caroliniana. The encapsulation efficiency of the herbicide in the MPs:ATZ was ca. 69%, yielding spherical microparticles with a diameter of ca. 100 µm, a sustained-release profile, and easily manipulated with an external magnetic field. Also, phytotoxicity issues showed that the MPs:ATZ maintained their herbicidal activity via inhibition of PSII, showing lower toxicity compared with the nonencapsulated ATZ at 0.01 and 0.02 µmol·L-1. Therefore, this technology may conveniently promote a novel magnetic controlled release of the herbicide ATZ (with the potential to be collected from a watercourse) and act as a nutrient boost to the nontarget plant, with good herbicidal activity and reduced risk to the environment.

Enhancement of cartilage extracellular matrix synthesis in Poly(PCL-TMC)urethane scaffolds: a study of oriented dynamic flow in bioreactor.

The development of new technologies to produce three-dimensional and biocompatible scaffolds associated with high-end cell culture techniques have shown to be promising for the regeneration of tissues and organs. Some biomedical devices, as meniscus prosthesis, require high flexibility and tenacity and such features are found in polyurethanes which represent a promising alternative. The Poly(PCL-TMC)urethane here presented, combines the mechanical properties of PCL with the elasticity attributed by TMC and presents great potential as a cellular carrier in cartilage repair. Scanning electron microscopy showed the presence of interconnected pores in the three-dimensional structure of the material. The scaffolds were submitted to proliferation and cell differentiation assays by culturing mesenchymal stem cells in bioreactor. The tests were performed in dynamic flow mode at the rate of 0.4 mL/min. Laser scanning confocal microscopy analysis showed that the flow rate promoted cell growth and cartilage ECM synthesis of aggrecan and type II collagen within the Poly(PCL-TMC)urethane scaffolds. This study demonstrated the applicability of the polymer as a cellular carrier in tissue engineering, as well as the ECM was incremented only when under oriented flow rate stimuli. Therefore, our results may also provide data on how oriented flow rate in dynamic bioreactors culture can influence cell activity towards cartilage ECM synthesis even when specific molecular stimuli are not present. This work addresses new perspectives for future clinical applications in cartilage tissue engineering when the molecular factors resources could be scarce for assorted reasons.

Rotary-jet spun polycaprolactone/nano-hydroxyapatite scaffolds modified by simulated body fluid influenced the flexural mode of the neoformed bone.

Polycaprolactone (PCL) is a biocompatible, biodegradable synthetic polymer which in combination with nanohydroxyapatite (nHAp) can give rise to a low cost, nontoxic bioactive product with excellent mechanical properties and slow degradation. Here we produced, characterized and evaluated in vivo the bone formation of PCL/nHAp scaffolds produced by the rotary jet spinning technique. The scaffolds produced were firstly soaked into simulated body fluid for 21 days to also obtain nHAp onto PCL/nHAp scaffolds. Afterwards, the scaffolds were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy and Raman spectroscopy. For in vivo experiments, 20 male Wistar rats were used and randomly divided in 4 experimental groups (n = 5). A critical defect of 3 mm in diameter was made in the tibia of the animals, which were filled with G1 control (clot); G2-PCL scaffold; G3-PCL/nHAp (5%) scaffold; G4-PCL/nHAp (20%) scaffold. All animals were euthanized 60 days after surgery, and the bone repair in the right tibiae were evaluated by radiographic analysis, histological analysis and histomorphometric analysis. While in the left tibias, the areas of bone repair were submitted to the flexural strength test. Radiographic and histomorphometric analyses no showed statistical difference in new bone formation between the groups, but in the three-point flexural tests, the PCL/nHAp (20%) scaffold positively influenced the flexural mode of the neoformed bone. These findings indicate that PCL/nHAp (20%) scaffold improve biomechanical properties of neoformed bone and could be used for bone medicine regenerative.