New Insights on Solvent-Induced Changes in Refractivity and Specific Rotation of Poly(propylene oxide) Systems Extracted from Channeled Spectra.

Investigation of chiroptical polymers in the solution phase is paramount for designing supramolecular architectures for photonic or biomedical devices. This work is devoted to the case study of poly(propylene oxide) (PPO) optical activity in several solvents: benzonitrile, carbon disulfide, chloroform, ethyl acetate, and p-dioxane. To attain information on the interactions in these systems, rheological testing was undertaken, showing distinct variations of the rheological parameters as a function of the solvent type. These aspects are also reflected in the refractive index dispersive behavior, from which linear and non-linear optical properties are extracted. To determine the circular birefringence and specific rotation of the PPO solutions, the alternative method of the channeled spectra was employed. The spectral data were correlated with the molecular modeling of the PPO structural unit in the selected solvents. Density functional theory (DFT) computational data indicated that the torsional potential energy-related to the O1-C2-C3-O4 dihedral angle from the polymer repeating unit-was hindered in solvation environments characterized by high polarity and the ability to interact via hydrogen bonding. This was in agreement with the optical characterization of the samples, which indicated a lower circular birefringence and specific rotation for the solutions of PPO in ethyl acetate and p-dioxane. Also, the shape of optical rotatory dispersion curves was slightly modified for PPO in these solvents compared with the other ones.

Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films.

To enrich the properties of polylactic acid (PLA)-based composite films and improve the base degradability, in this study, a certain amount of poly(propylene carbonate) (PPC) was added to PLA-based composite films, and PLA/PPC-based composite films were prepared by melt blending and hot-press molding. The effects of the introduction of PPC on the composite films were analyzed through in-depth studies on mechanical properties, water vapor and oxygen transmission rates, thermal analysis, compost degradability, and bacterial inhibition properties of the composite films. When the introduction ratio coefficient of PPC was 30%, the tensile strength of the composite film increased by 19.68%, the water vapor transmission coefficient decreased by 14.43%, and the oxygen transmission coefficient decreased by 18.31% compared to that of the composite film without PPC, the cold crystallization temperature of the composite film increased gradually from 96.9 °C to 104.8 °C, and PPC improved the crystallization ability of composite film. The degradation rate of the composite film with PPC increased significantly compared to the previous one, and the degradation rate increased with the increase in the PPC content. The degradation rate was 49.85% and 46.22% faster on average than that of the composite film without PPC when the degradation was carried out over 40 and 80 days; the composite film had certain inhibition, and the maximum diameter of the inhibition circle was 2.42 cm. This study provides a strategy for the development of PLA-based biodegradable laminates, which can promote the application of PLA-based laminates in food packaging.

Durable and Robust Antibacterial Polypropylene Hernia Mesh for Abdominal Wall Defect Repair.

Polypropylene (PP) mesh is commonly used in repairing abdominal wall hernia (AWH). However, the use of synthetic prosthesis comes with the risk of developing a prosthetic infection, resulting in delayed healing, secondary surgery, and potentially increased mortality. To address these issues, a facile surface functionalization strategy for PP mesh based on phytic acid (PA) and polyhexamethylene guanidine (PHMG) was constructed through a one-step co-deposition process, referred to as the PA/PHMG coating. The development of PA/PHMG coating is mainly attributed to the surface affinity of PA and the electrostatic interactions between PA and PHMG. The PA/PHMG coating could be completed within 4 h under mild conditions. The prepared PA/PHMG coatings on PP mesh surfaces exhibited desirable biocompatibility toward mammalian cells and excellent antibacterial properties against the notorious "superbug" methicillin-resistant Staphylococcus aureus (MRSA) and tetracycline-resistant Escherichia coli (TRE). The PA/PHMG-coated PP meshes showed killing ratios of over 99% against MRSA in an infected abdominal wall hernia repair model. Furthermore, histological and immunohistochemical analysis revealed a significantly attenuated degree of neutrophil infiltration in the PA/PHMG coating group, attributed to the decreased bacterial numbers alleviating the inflammatory response at the implant sites. Meanwhile, the pristine PP and PA/PHMG-coated meshes showed effective tissue repair, with the PA/PHMG coating group exhibiting enhanced angiogenesis compared with pristine PP meshes, suggesting superior tissue restoration. Additionally, PP meshes with the highest PHMG weight ratio (PA/PHMG(3)) exhibited excellent long-term robustness under phosphate-buffered saline (PBS) immersion with a killing ratio against MRSA still exceeding 95% after 60 days of PBS immersion. The present work provides a facile and promising approach for developing antibacterial implants.

pH-Responsive antibacterial metal-phenolic network coating on hernia meshes.

Polypropylene (PP) mesh is widely used in hernioplasty, but it is prone to contamination by pathogenic bacteria. Here, we present an infection microenvironment-responsive metal-phenolic network (MPN) coating, which is made up of Cu2+ and tannic acid (TA) (referred to as CT coating), and is fabricated on PP meshes by layer-by-layer (LbL) assembly. The CT coating provided a robust protection for the PP mesh from pathogenic bacterial infection in a pH-responsive manner due to the pH-responsive disassembly kinetics of MPN complexes. Moreover, the PP meshes with ten CT coating cycles (PP-CT(10)) exhibited excellent stability in a physiological environment, with the killing ratio against "superbug" methicillin-resistant Staphylococcus aureus (MRSA) at pH 5.5 exceeding 99% even after 28 days of PBS (pH 7.4) immersion. In addition, the PP-CT(10) exhibited excellent in vivo anti-infective ability in a rodent subcutaneous implant MRSA infection model, and the results of histological and immunohistochemical analyses demonstrated that the reduced bacterial number alleviated the inflammatory response at implant sites. This study revealed that MPN coating is a promising strategy, which could provide a self-defensive ability for various implants to combat post-surgical infections in a pH-responsive manner.

Microplastic contaminants detection in aquatic environment by hydrophobic cerium oxide nanoparticles.

Microplastics (MPs) poses a significant threat to ecosystems and human health, demanding immediate attention. The reported research work offers an effective and low cost method towards the detection of toxic MPs. In this study, hydrophobic cerium oxide nanoparticles (CeO2 NPs) are synthesized and applied as promising electrode material for the detection of two different types of MPs, i.e. polyethylene (PE) and polypropylene (PP). Through electrochemical analyses, such as cyclic voltammetry (CV) and linear sweep voltammetry (LSV), hydrophobic CeO2 NPs modified glassy carbon electrode (GCE) based sensor demonstrated remarkable sensitivity of ∼0.0343 AmLmg-1cm-2 and detection limit of ∼0.226 mgmL-1, with promising correlation coefficient (R2) towards the detection of PE (∼27-32 µm). Furthermore, hydrophobic CeO2 NPs modified GCE exhibited promising stability and reproducibility towards PE (∼27-32 µm), suggesting the promising potential of hydrophobic CeO2 NPs as electrode materials for an electrochemical microplastics detection.

Distribution characteristics and microbial synergistic degradation potential of polyethylene and polypropylene in freshwater estuarine sediments.

The microbial degradation of polyethylene (PE) and polypropylene (PP) resins in rivers and lakes has emerged as a crucial issue in the management of microplastics. This study revealed that as the flow rate decreased longitudinally, ammonia nitrogen (NH4+-N), heavy fraction of organic carbon (HFOC), and small-size microplastics (< 1 mm) gradually accumulated in the deep and downstream estuarine sediments. Based on their surface morphology and carbonyl index, these sediments were identified as the potential hot zone for PE/PP degradation. Within the identified hot zone, concentrations of PE/PP-degrading genes, enzymes, and bacteria were significantly elevated compared to other zones, exhibiting strong intercorrelations. Analysis of niche differences revealed that the accumulation of NH4+-N and HFOC in the hot zone facilitated the synergistic coexistence of key bacteria responsible for PE/PP degradation within biofilms. The findings of this study offer a novel insight and comprehensive understanding of the distribution characteristics and synergistic degradation potential of PE/PP in natural freshwater environments.

How to Measure Polymer Degradation? An Analysis of Authors' Choices When Calculating the Carbonyl Index.

The carbonyl index aims to measure the degradation level and is used in plastic degradation research as a proxy for the general degradation level of collected plastic pieces. According to the choices for carbonyl index calculation, comparison using this index is prevented and must be unveiled by the authors, which does not always happen. In order to study the proper usage of the carbonyl index, regarding the choice of the reference band and the usage of the band intensity or the absorption area, we systematically reviewed the methodologies used for polypropylene as a case study. Based on 95 studies gathered from 2000 to 2024, two main methods were used to determine the carbonyl index: the ratio between the carbonyl band area and the reference band area (33.68%) and the ratio between the highest intensity of the carbonyl band and the reference band (66.31%). The reference band of choice and the type of calculation method produce different carbonyl index values for the same spectra and mean different information, preventing comparison among works with different calculations.

Spray-drying of PEI-/PPI-based nanoparticles for DNA or siRNA delivery.

Spray-drying of nucleic acid-based drugs designed for gene therapy or gene knockdown is associated with many advantages including storage stability and handling as well as the possibility of pulmonary application. The encapsulation of nucleic acids in nanoparticles prior to spray-drying is one strategy for obtaining efficient formulations. This, however, strongly relies on the definition of optimal nanoparticles, excipients and spray-drying conditions. Among polymeric nanoparticles, polyethylenimine (PEI)-based complexes with or without chemical modifications have been described previously as very efficient for gene or oligonucleotide delivery. The tyrosine-modification of linear or branched low molecular weight PEIs, or of polypropylenimine (PPI) dendrimers, has led to high complex stability, improved cell uptake and transfection efficacy as well as high biocompatibility. In this study, we identify optimal spray-drying conditions for PEI-based nanoparticles containing large plasmid DNA or small siRNAs, and further explore the spray-drying of nanoparticles containing chemically modified polymers. Poly(vinyl alcohol) (PVA), but not trehalose or lactose, is particularly well-suited as excipient, retaining or even enhancing transfection efficacies compared to fresh complexes. A big mesh size is critically important as well, while the variation of the spray-drying temperature plays a minor role. Upon spray-drying, microparticles in a âˆ¼ 3.3 - 8.5 µm size range (laser granulometry) are obtained, dependent on the polymers. Upon their release from the spray-dried material, the nanoparticles show increased sizes and markedly altered zeta potentials as compared to their fresh counterparts. This may contribute to their high efficacy that is seen also after prolonged storage of the spray-dried material. We conclude that these spray-dried systems offer a great potential for the preparation of nucleic acid drug storage forms with facile reconstitution, as well as for their direct pulmonary application as dry powder.

Efficient in vitro and in vivo transfection of self-amplifying mRNA with linear poly(propylenimine) and poly(ethylenimine-propylenimine) random copolymers as non-viral carriers.

Messenger RNA (mRNA) based vaccines have been introduced worldwide to combat the Covid-19 pandemic. These vaccines consist of non-amplifying mRNA formulated in lipid nanoparticles (LNPs). Consequently, LNPs are considered benchmark non-viral carriers for nucleic acid delivery. However, the formulation and manufacturing of these mRNA-LNP nanoparticles are expensive and time-consuming. Therefore, we used self-amplifying mRNA (saRNA) and synthesized novel polymers as alternative non-viral carrier platform to LNPs, which enable a simple, rapid, one-pot formulation of saRNA-polyplexes. Our novel polymer-based carrier platform consists of randomly concatenated ethylenimine and propylenimine comonomers, resulting in linear, poly(ethylenimine-ran-propylenimine) (L-PEIx-ran-PPIy) copolymers with controllable degrees of polymerization. Here we demonstrate in multiple cell lines, that our saRNA-polyplexes show comparable to higher in vitro saRNA transfection efficiencies and higher cell viabilities compared to formulations with Lipofectamine MessengerMAX™ (LFMM), a commercial, lipid-based carrier considered to be the in vitro gold standard carrier. This is especially true for our in vitro best performing saRNA-polyplexes with N/P 5, which are characterised with a size below 100 nm, a positive zeta potential, a near 100% encapsulation efficiency, a high retention capacity and the ability to protect the saRNA from degradation mediated by RNase A. Furthermore, an ex vivo hemolysis assay with pig red blood cells demonstrated that the saRNA-polyplexes exhibit negligible hemolytic activity. Finally, a bioluminescence-based in vivo study was performed over a 35-day period, and showed that the polymers result in a higher and prolonged bioluminescent signal compared to naked saRNA and L-PEI based polyplexes. Moreover, the polymers show different expression profiles compared to those of LNPs, with one of our new polymers (L-PPI250) demonstrating a higher sustained expression for at least 35 days after injection.

Physicochemical stability of bortezomib solutions for subcutaneous administration.

For the majority of cytotoxic drug preparations, such as bortezomib, the unit dose information is not available. In addition, there is a lack of information on the physicochemical stability of the pharmaceutical preparation after opening; this information is crucial for its administration to patients in successive visits, and the per-patient cost can be affected. The purpose of our proposed physicochemical stability study is to determine the shelf life of the reconstituted liquid product under refrigeration and clinical practice conditions. This evaluation was extended to both vials and ready-to-use syringes prefilled with the contents of the open vial. The stability test design includes the specified storage conditions and the critical physicochemical parameters of reconstituted injectable bortezomib. Furthermore, this approach includes the determination of impurities, the monitoring of the purity of the mean peak using a photodiode array, the control of the mass balance, the monitoring of subvisible particles using a laser diffraction analyser, and the setting of stability specifications. For the chemical stability study, the amount of bortezomib and its degradation products were determined using a stability-indicating HPLC method. The physical inspection of the samples was performed throughout the stability study, and their pH values were also monitored. Bortezomib (2.5 mg/mL) in 0.9% sodium chloride remained stable for 7 days when stored in both polypropylene syringes and vials at 5 ± 3 °C (refrigeration) and shielded from light. Additionally, it exhibits stability for 24 h under storage conditions simulating clinical use (20-30 °C and protected from light). The proposed protocol provides the stability in the vials once reconstituted and in prefilled refrigerated syringes; this protocol can be used to reduce waste and increase cost savings.

Plastic Fruit Stickers in Industrial Composting─Surface and Structural Alterations Revealed by Electron Microscopy and Computed Tomography.

Often large quantities of plastics are found in compost, with price look-up stickers being a major but little-explored component in the contamination path. Stickers glued to fruit or vegetable peels usually remain attached to the organic material despite sorting processes in the composting plant. Here, we investigated the effects of industrial composting on the structural alterations of these stickers. Commercial polypropylene (PP) stickers on banana peels were added to a typical organic material mixture for processing in an industrial composting plant and successfully resampled after a prerotting (11 days) and main rotting step (25 days). Afterward, both composted and original stickers were analyzed for surface and structural changes via scanning electron microscopy, Fourier-transform infrared spectroscopy, and micro- and nano-X-ray computed tomography (CT) combined with deep learning approaches. The composting resulted in substantial surface changes and degradation in the form of microbial colonization, deformation, and occurrence of cracks in all stickers. Their pore volumes increased from 16.7% in the original sticker to 26.3% at the end of the compost process. In a similar way, the carbonyl index of the stickers increased. Micro-CT images additionally revealed structural changes in the form of large adhesions that penetrated the surface of the sticker. These changes were accompanied by delamination after 25 days of composting, thus overall hinting at the degradation of the stickers and the subsequent formation of smaller microplastic pieces.

Modeling the degradation of polypropylene and polystyrene under shock compression and mechanical cleaving using the ReaxFF force field.

Polypropylene (PP) and polystyrene (PS) underwent a comprehensive investigation into their mechanical and chemical degradation through reactive molecular dynamics simulations. The simulations utilized the ReaxFF force field for CHO (carbon-hydrogen-oxygen) systems in the combustion branch. The study included equilibrium simulations to determine densities and melting temperatures, non-equilibrium simulations for stress-strain and Young moduli determination, mechanical cleaving to identify surface species resulting from material fragmentation, and shock compression simulations to elucidate chemical reactions activated by some external energy sources. The results indicate that material properties such as densities, phase transition temperatures, and Young moduli are accurately reproduced by the ReaxFF-CHO force field. The reactive dynamics analysis yielded crucial insights into the surface composition of fragmented polymers. Both polymers exhibited backbone breakage, leaving -CH2· and -CH·- radicals as terminals. PP demonstrated substantial fragmentation, while PS showed a tendency to develop crosslinks. A detailed analysis of chemical reactions resulting from increasing activation due to increasing value of compression pressure is presented and discussed.

Production of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor.

There is a serious concern about the large amount of accumulated plastic waste all around the world. Synthetic polymers such as polyethylene terephthalate (PET), polypropylene (PP), and polyethylene (HDPE, LDPE) are substantially present in the plastic waste generated. There are various methods reported to minimise such plastics waste with certain limitations. To overcome such limitations the present study have been carried out in which thermal decomposition of plastic waste of PET, PP, HDPE, and LDPE studied using a novel plasma pyrolysis reactor. The major objective of this work is to investigate the viability of the continuous plasma pyrolysis process for the treatment of various plastic wastes with respect to waste volume reduction and production of combustible hydrogen-rich fuel gas. The effect of temperature and feed flow rate on product gas yield, product gas efficiency, solid residue yield, and H2/CO ratio has been evaluated. The experiments have been carried out at different temperatures within the range of 700-1000 °C. Plasma pyrolysis system exhibited combustible hydrogen-rich gas as a product and solid residue. Liquid products have not been observed during plasma pyrolysis, unlike conventional pyrolysis. The reaction mechanism of plastic cracking has been discussed based on literature and products obtained in the present work. The effects of feed flow rate and temperature on exergy efficiency were studied using the response surface method. The mass, energy, and exergy analyses have also been carried out for all the experiments, which are in the range of 0.95-0.99, 0.48 to 0.77, and 0.30 to 0.69, respectively.

Analysis and identification of degradation products in gas, particle, and liquid phases of polypropylene and polyethyleneterephthalate microplastics aging through non-thermal plasma simulation.

Plastic aging can cause alterations in the physical and chemical characteristics of plastics, as well as their behavior in the environment. Due to the extremely slow natural aging process, laboratory simulated aging methods have to be used. In this study, non-thermal plasma (NTP) was adopted to investigate the aging process of polypropylene (PP) and polyethylene terephthalate (PET) microplastics. Various analytical instruments, including proton transfer reaction mass spectrometry and single-particle aerosol mass spectrometry, were employed to examine and identify the organic constituents of the gas, liquid, and particle phase degradation products, as well as to monitor the degradation process. The results showed that after 90 min of aging, both PP and PET surfaces showed yellowing, and the carbonyl index of PP increased while that of PET decreased, with an increase in crystallinity. The organic components of reaction products, such as ketones, esters, acids, and alcohols, increased with longer aging times. Gas products mainly contain aromatic hydrocarbons, while particles from aged PET contain compounds with benzene rings and metal elements. Liquid products from aged PP show a significant presence of branched alkanes. Based on this analysis, degradation mechanisms of PP and PET by NTP were proposed. This investigation represents the initial systematically exploration of the release of organic substances during the degradation of microplastics mediated by NTP. It provides significant insights into the detrimental organic compounds emitted during this process, thereby offering valuable information for understanding the environmental and human health implications of natural microplastic degradation. Furthermore, it addressed the requirements for increased attention to the potential environmental risks associated with these harmful components.

Uncovering the relationship between macrophages and polypropylene surgical mesh.

Currently, in vitro testing examines the cytotoxicity of biomaterials but fails to consider how materials respond to mechanical forces and the immune response to them; both are crucial for successful long-term implantation. A notable example of this failure is polypropylene mid-urethral mesh used in the treatment of stress urinary incontinence (SUI). The mesh was largely successful in abdominal hernia repair but produced significant complications when repurposed to treat SUI. Developing more physiologically relevant in vitro test models would allow more physiologically relevant data to be collected about how biomaterials will interact with the body. This study investigates the effects of mechanochemical distress (a combination of oxidation and mechanical distention) on polypropylene mesh surfaces and the effect this has on macrophage gene expression. Surface topology of the mesh was characterised using SEM and AFM; ATR-FTIR, EDX and Raman spectroscopy was applied to detect surface oxidation and structural molecular alterations. Uniaxial mechanical testing was performed to reveal any bulk mechanical changes. RT-qPCR of selected pro-fibrotic and pro-inflammatory genes was carried out on macrophages cultured on control and mechanochemically distressed PP mesh. Following exposure to mechanochemical distress the mesh surface was observed to crack and craze and helical defects were detected in the polymer backbone. Surface oxidation of the mesh was seen after macrophage attachment for 7 days. These changes in mesh surface triggered modified gene expression in macrophages. Pro-fibrotic and pro-inflammatory genes were upregulated after macrophages were cultured on mechanochemically distressed mesh, whereas the same genes were down-regulated in macrophages exposed to control mesh. This study highlights the relationship between macrophages and polypropylene surgical mesh, thus offering more insight into the fate of an implanted material than existing in vitro testing.

Size effects of microplastics on antibiotic resistome and core microbiome in an urban river.

Microplastics (MPs) in aquatic environments provide a new ecological niche that facilitates the attachment of antibiotic-resistance genes (ARGs) and pathogens. However, the effect of particle size on the colonization of antibiotic resistomes and pathogens remains poorly understood. To address this knowledge gap, this study explored the antibiotic resistome and core microbiome on three distinct types of MPs including polyethylene, polypropylene, and polystyrene (PS), with varying sizes of 30, 200, and 3000 µm by metagenomic sequencing. Our finding showed that the ARG abundances of the PS type increased by 4-folds with increasing particle size from 30 to 3000 µm, and significant differences in ARG profiles were found across the three MP types. In addition, the concentrations of ARGs and mobile genetic elements (MGEs) were markedly higher in the MPs than in the surrounding water, indicating their enrichment at these artificial interfaces. Notably, several pathogens such as Pseudomonas aeruginosa, Mycobacterium tuberculosis, and Legionella pneumophila were enriched in MP biofilms, and the co-occurrence of ARGs and virulence factor genes (VFGs)/MGEs suggested the presence of pathogenic antibiotic-resistant microbes with potential mobility. Both redundancy analysis (RDA) and structural equation modeling (SEM) demonstrated that physicochemical properties such as zeta potential, MP size, and contact angle were the most significant contributors to the antibiotic resistome. Strikingly, no significant differences were observed in the health risk scores of the ARG profiles among different sizes and types of MPs. This study expands our knowledge on the impact of MP size on microbial risks, thus enhancing our understanding of the potential health hazards they pose.

Controlled adsorption of multiple bioactive proteins enables targeted mast cell nanotherapy.

Protein adsorption onto nanomaterials often results in denaturation and loss of bioactivity. Controlling the adsorption process to maintain the protein structure and function has potential for a range of applications. Here we report that self-assembled poly(propylene sulfone) (PPSU) nanoparticles support the controlled formation of multicomponent enzyme and antibody coatings and maintain their bioactivity. Simulations indicate that hydrophobic patches on protein surfaces induce a site-specific dipole relaxation of PPSU assemblies to non-covalently anchor the proteins without disrupting the protein hydrogen bonding or structure. As a proof of concept, a nanotherapy employing multiple mast-cell-targeted antibodies for preventing anaphylaxis is demonstrated in a humanized mouse model. PPSU nanoparticles displaying an optimized ratio of co-adsorbed anti-Siglec-6 and anti-FcεRIα antibodies effectively inhibit mast cell activation and degranulation, preventing anaphylaxis. Protein immobilization on PPSU surfaces provides a simple and rapid platform for the development of targeted protein nanomedicines.

Interaction mechanism of water-soluble inorganic arsenic onto pristine nanoplastics.

Nanoplastics (NPLs) persist in aquatic habitats, leading to incremental research on their interaction mechanisms with metalloids in the environment. In this regard, it is known that plastic debris can reduce the number of water-soluble arsenicals in contaminated environments. Here, the arsenic interaction mechanism with pure NPLs, such as polyethylene terephthalate (PET), aliphatic polyamide (PA), polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), and polystyrene (PS) is evaluated using computational chemistry tools. Our results show that arsenic forms stable monolayers on NPLs through surface adsorption, with adsorption energies of 9-24 kcal/mol comparable to those on minerals and composite materials. NPLs exhibit varying affinity towards arsenic based on their composition, with As(V) adsorption showing higher stability than As(III). The adsorption mechanism results from a balance between electrostatics and dispersion forces (physisorption), with an average combined contribution of 87%. PA, PET, PVC, and PS maximize the electrostatic effects over dispersion forces, while PE and PP maximize the dispersion forces over electrostatic effects. The electrostatic contribution is attributed to hydrogen bonding and the activation of terminal O-C, C-H, and C-Cl groups of NPLs, resulting in several pairwise interactions with arsenic. Moreover, NPLs polarity enables high mobility in aqueous environments and fast mass transfer. Upon adsorption, As(III) keeps the NPLs polarity, while As(V) limits subsequent uptake but ensures high mobility in water. The solvation process is destabilizing, and the higher the NPL polarity, the higher the solvation energy penalty. Finally, the mechanistic understanding explains how temperature, pressure, pH, salinity, and aging affect arsenic adsorption. This study provides reliable quantitative data for sorption and kinetic experiments on plastic pollution and enhances our understanding of interactions between water contaminants.

Spider-Silk-like Fiber Mat-Covered Polypropylene Warp-Knitted Hernia Mesh for Inhibition of Fibrosis under Dynamic Environment.

Hernia surgery is a widely performed procedure, and the use of a polypropylene mesh is considered the standard approach. However, the mesh often leads to complications, including the development of scar tissue that wraps around the mesh and causes it to shrink. Consequently, there is a need to investigate the relationship between the mesh and scar formation as well as to develop a hernia mesh that can prevent fibrosis. In this study, three different commercial polypropylene hernia meshes were examined to explore the connection between the fabric structure and mechanical properties. In vitro dynamic culture was used to investigate the mechanism by which the mechanical properties of the mesh in a dynamic environment affect cell differentiation. Additionally, electrospinning was employed to create polycaprolactone spider-silk-like fiber mats to achieve mechanical energy dissipation in dynamic conditions. These fiber mats were then combined with the preferred hernia mesh. The results demonstrated that the composite mesh could reduce the activation of fibroblast mechanical signaling pathways and inhibit its differentiation into myofibroblasts in dynamic environments.

The programmed sequence-based oxygenase screening for polypropylene degradation.

Enzymatic degradation of plastic is an effective means of plastic recycling and pollution control. However, the strong chemical inertness of polypropylene plastic (PP) severely impedes its oxidative cleavage, making it resistant to degradation. In this study, based on sequence screening of Hidden Markov Model (HMM), a dioxygenase (HIS1) was identified and characterized to be effective in PP oxidation. Various kinds of PP products, including plastic films, microplastics, and disposable water cups or bags, were HIS1-degraded with cracks and holes on the surface. The hydrophobic binding was the primary force driving oxidative degradation in the specific cavity of HIS1. The discovery of HIS1 achieved a zero breakthrough in PP biodegradation, providing a promising candidate for the selection and evolution of degrading enzymes.