Light Response of Pseudomonas putida KT2440 Mediated by Class II LitR, a Photosensor Homolog.

Pseudomonas putida KT2440 retains three homologs (PplR1 to PplR3) of the LitR/CarH family, an adenosyl B12-dependent light-sensitive MerR family transcriptional regulator. Transcriptome analysis revealed the existence of a number of photoinducible genes, including pplR1, phrB (encoding DNA photolyase), ufaM (furan-containing fatty acid synthase), folE (GTP cyclohydrolase I), cryB (cryptochrome-like protein), and multiple genes without annotated/known function. Transcriptional analysis by quantitative reverse transcription-PCR with knockout mutants of pplR1 to pplR3 showed that a triple knockout completely abolished the light-inducible transcription in P. putida, which indicates the occurrence of ternary regulation of PplR proteins. A DNase I footprint assay showed that PplR1 protein specifically binds to the promoter regions of light-inducible genes, suggesting a consensus PplR1-binding direct repeat, 5'-T(G/A)TACAN12TGTA(C/T)A-3'. The disruption of B12 biosynthesis cluster did not affect the light-inducible transcription; however, disruption of ppSB1-LOV (where LOV indicates "light, oxygen, or voltage") and ppSB2-LOV, encoding blue light photoreceptors adjacently located to pplR3 and pplR2, respectively, led to the complete loss of light-inducible transcription. Overall, the results suggest that the three PplRs and two PpSB-LOVs cooperatively regulate the light-inducible gene expression. The wide distribution of the pplR/ppSB-LOV cognate pair homologs in Pseudomonas spp. and related bacteria suggests that the response and adaptation to light are similarly regulated in the group of nonphototrophic bacteria.IMPORTANCE The LitR/CarH family is a new group of photosensor homologous to MerR-type transcriptional regulators. Proteins of this family are distributed to various nonphototrophic bacteria and grouped into at least five classes (I to V). Pseudomonas putida retaining three class II LitR proteins exhibited a genome-wide response to light. All three paralogs were functional and mediated photodependent activation of promoters directing the transcription of light-induced genes or operons. Two LOV (light, oxygen, or voltage) domain proteins, adjacently encoded by two litR genes, were also essential for the photodependent transcriptional control. Despite the difference in light-sensing mechanisms, the DNA binding consensus of class II LitR [T(G/A)TA(C/T)A] was the same as that of class I. This is the first study showing the actual involvement of class II LitR in light-induced transcription.

Metabolite profiling of the cold adaptation of Pseudomonas putida KT2440 and cold-sensitive mutants.

Free-living bacteria such as Pseudomonas putida are frequently exposed to temperature shifts and non-optimal growth conditions. We compared the transcriptome and metabolome of the cold adaptation of P. putida KT2440 and isogenic cold-sensitive transposon mutants carrying transposons in their cbrA, cbrB, pcnB, vacB, and bipA genes. Pseudomonas putida changes the mRNA expression of about 43% of all annotated open reading frames during this initial phase of cold adaptation, but only a small number of 6-93 genes were differentially expressed at 10°C between the wild-type strain and the individual mutants. The spectrum of metabolites underwent major changes during cold adaptation particularly in the mutants. Both the KT2440 strain and the mutants increased the levels of the most abundant sugars and amino acids which were more pronounced in the cold-sensitive mutants. All mutants depleted their pools for core metabolites of aromatic and sugar metabolism, but increased their pool of polar amino acids which should be advantageous to cope with the cold stress.

Enhanced degradation of hydrocarbons by gamma ray induced mutant strain of Pseudomonas putida.

Soil contamination due to petroleum hydrocarbons is a ubiquitous environmental problem for which efficient remediation alternatives are required. Application of hydrocarbons degrading bacteria with enhanced degradation potential is such an alternative. The aim of present investigation was to induce mutagenicity in Pseudomonas putida through gamma-ray irradiation for the enhanced degradation of crude oil. A total of mutant 10 bacterial strains (300A-J) were screened for their degradation abilities in vitro; among which the performance of 300-B was outstanding. Subsequently, spiked soil (30 g/kg crude oil) was augmented with the wild-type parent strain and mutant 300-B strain in individual experiments. Bacterial inoculation in both experiments enhanced hydrocarbons degradation; however, degradation was 46.3% higher when 300-B mutant strain was employed. This improved oil degradation was found to have a strong positive correlation with the gene abundance and expression of the mutant strain, suggesting its successful survival and catabolic potential in situ. Concomitantly, a better nutrients assimilation and water utilization was observed in the experiment containing 300-B mutant. Yet preliminary, these findings highlight the importance of gamma ray irradiation towards improved degradation potential of previously isolated hydrocarbons degrading bacteria.

Involvement of transcription-coupled repair factor Mfd and DNA helicase UvrD in mutational processes in Pseudomonas putida.

Stalled RNA polymerases (RNAPs) pose an obstacle for the replicating complexes, which could lead to transcription-replication conflicts and result in genetic instability. Stalled RNAPs and DNA lesions blocking RNAP elongation are removed by transcription-coupled repair (TCR), the process which in bacteria is mediated by TCR factor Mfd and helicase UvrD. Although the mechanism of TCR has been extensively studied, its role in mutagenesis is still obscure. In the current study we have investigated the role of Mfd and UvrD in mutational processes in soil bacterium Pseudomonas putida. Our results revealed that UvrD helicase is essential to prevent the emergence of mutations, as the loss of uvrD resulted in elevated mutant frequency both in exponential- and stationary-phase bacterial cultures. UvrD was also found to be necessary to survive DNA damage, but NER or MMR pathways are not completely abolished in UvrD-deficient P. putida. Mfd-deficiency had a moderate impact on surviving DNA damage and did not influence the frequency of mutations occurred in exponentially growing bacteria. However, the absence of Mfd caused approximately a two-fold decline in stationary-phase mutant frequency compared to the P. putida wild-type strain and suppressed the elevated mutant frequency observed in the ΔuvrD strain. Remarkably, the Mfd-deficient strain also formed less UV-induced mutants. These results suggest that in P. putida the Mfd-mediated TCR could be associated with UV- and stationary-phase mutagenesis.

Combined effect of attrition and ultrasound on the disruption of Pseudomonas putida for the efficient release of arginine deiminase.

Disruption of Pseudomonas putida KT2440 by ultrasound treatment in a bath sonicator, in presence of the glass beads, was carried out for the release of arginine deiminase (ADI) and the results were compared with that of by Dyno-mill. The release of ADI depended mainly on the bead size and cellmass concentration being disrupted in bead mill. Nearly 23 U mL-1 ADI was released when slurry with a cell-mass concentration of 250 g L-1 was disintegrated for 9 min with 80% bead loading (0.25 mm) in Dyno-mill. Marginally higher amount of ADI (24.1 U mL-1 ) was released by the bath sonication of 250 g L-1 cellmass slurry for 30 min with the beads (0.1 mm) and a sonication power of 170 W. The glass beads, suspended along with the cellmass slurry in bath sonicator, efficiently disrupted the microbial cells to release ADI. Variation in the kinetic constants for the performance parameters implied that ADI release and cell disruption kinetics is a function of disruption technique used and the process variables thereof. Estimation of location factor suggested that selective release of ADI can be achieved. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 2018 © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1185-1194, 2018.

3D printing of bacteria into functional complex materials.

Despite recent advances to control the spatial composition and dynamic functionalities of bacteria embedded in materials, bacterial localization into complex three-dimensional (3D) geometries remains a major challenge. We demonstrate a 3D printing approach to create bacteria-derived functional materials by combining the natural diverse metabolism of bacteria with the shape design freedom of additive manufacturing. To achieve this, we embedded bacteria in a biocompatible and functionalized 3D printing ink and printed two types of "living materials" capable of degrading pollutants and of producing medically relevant bacterial cellulose. With this versatile bacteria-printing platform, complex materials displaying spatially specific compositions, geometry, and properties not accessed by standard technologies can be assembled from bottom up for new biotechnological and biomedical applications.

Performance of an Ultraviolet Mutagenetic Polyphosphate-Accumulating Bacterium PZ2 and Its Application for Wastewater Treatment in a Newly Designed Constructed Wetland.

Total phosphorus (TP) removal performance and application for wastewater treatment of polyphosphate-accumulating bacteria (PAB) in constructed wetlands (CWs) were investigated. In this study, a novel isolated ultraviolet (UV) mutant PZ2 with phosphate-accumulating ability was screened from domestic wastewater and identified as Pseudomonas putida by 16S ribosomal DNA (rDNA) sequencing analysis. The TP removal performance of PZ2 in the synthetic wastewater reached the highest of 93.95 % within 45 h. Two vertical subsurface flow CWs planted with two aquatic macrophytes Canna indica and Acorus calamus were newly designed. After inoculating PZ2 into two CWs within 45 h, the average chemical oxygen demand (COD), TP, and ammonia-nitrogen (NH3-N) removal efficiencies reached 68.50, 60.22, and 66.81 %, respectively. Vegetation type and filter size significantly influenced the TP removal capability of PZ2 in CWs. Meanwhile, considerable qualitative differences were found in the pollutant removal efficiencies of PZ2 with and without CWs in synthetic wastewater. These results could also indicate potential applications of the UV mutagenesis in PAB isolation and the newly designed CWs in wastewater treatments.

The response of aggregated Pseudomonas putida CP1 cells to UV-C and UV-A/B disinfection.

UV radiation is a spread method used worldwide for the disinfection of water. However, much of the research on the disinfection of bacterial cells by UV has focused on planktonic cells. Many bacterial cells in nature are present in clumps or aggregates, and these aggregates, which are more resistant to disinfection than their planktonic counterparts, can be problematic in engineered water systems. The current research used Pseudomonas putida (P. putida) CP1, an environmental and non-pathogenic microorganism which autoaggregates when grown under certain conditions, as a model organism to simulate aggregated cells. The study investigated the response of both the planktonic and the aggregated forms of the bacterium to UV-C (λ = 253.7 nm) and UV-A/B (λ > 300 nm) disinfection at laboratory scale in a minimal medium. The planktonic cells of P. putida CP1 were inactivated within 60 s by UV-C and in 60 min by UV-A/B; however, the aggregated cells required 120 min of UV-C treatment and 240 min of UV-A/B radiation to become inactive. The size of the aggregate was reduced following UV treatment. Although all the cells had lost culturability, viability as measured by the LIVE/DEAD® stain and epifluorescence microscopy was not completely lost and the cells all demonstrated regrowth after overnight incubation in the dark.

Freeing Pseudomonas putida†KT2440 of its proviral load strengthens endurance to environmental stresses.

2.6% of the genome of the soil bacterium Pseudomonas putida KT2440 encodes phage-related functions, but the burden of such opportunistic DNA on the host physiology is unknown. Each of the four apparently complete prophages borne by this strain was tested for stability, spontaneous excision and ability to cause lysis under various stressing conditions. While prophages P3 (PP2266-PP2297) and P4 (PP1532-1584) were discharged from the genome at a detectable rate, their induction failed otherwise to yield infective viruses. Isogenic P. putida KT2440 derivatives bearing single and multiple deletions of each of the prophages were then subjected to thorough phenotypic analyses, which generally associated the loss of proviral DNA with an increase of physiological vigour. The most conspicuous benefit acquired by prophage-less cells was a remarkable improvement in tolerance to UV light and other insults to DNA. This was not accompanied, however, with an upgrade of recA-mediated homologous recombination. The range of tolerance to DNA damage gained by the prophage-free strain was equivalent to the UV resistance endowed by the TOL plasmid pWW0 to the wild-type bacterium. While the P. putida's prophages are therefore genuinely parasitic, their detrimental effects can be offset by acquisition of compensatory traits through horizontal gene transfer.

Responses of unsaturated Pseudomonas putida CZ1 biofilms to environmental stresses in relation to the EPS composition and surface morphology.

The extracellular polymeric substance (EPS) and surface properties of unsaturated biofilms of a heavy metal-resistant rhizobacterium Pseudomonas putida CZ1, in response to aging, pH, temperature and osmotic stress, were studied by quantitative analysis of EPS and atomic force microscope. It was found that EPS production increased approximately linearly with culture time, cells in the air-biofilm interface enhanced EPS production and decreased cell volume to cope with nutrient depletion during aging. Low pH, high temperature and certain osmotic stress (120 mM NaCl) distinctly stimulated EPS production, and the main component enhanced was extracellular protein. In addition to the enhancement of EPS production in response to high osmotic (328 mM NaCl) stress, cells in the biofilm adhere tightly together to maintain a particular microenvironment. These results indicated the variation of EPS composition and the cooperation of cells in the biofilms is important for the survival of Pseudomonas putida CZ1 from environmental stresses in the unsaturated environments such as rhizosphere.

Analysis of proteins expressed by an abiotic stress tolerant Pseudomonas putida (NBAII-RPF9) isolate under saline and high temperature conditions.

Pseudomonas putida (NBAII-RPF9) was identified as an abiotic stress tolerant bacterium capable of growing at 45 °C as well as in 1 M NaCl. The proteins expressed by this bacterium when subjected to these two stresses were analyzed by 2D gel and MALDI-TOF/MS. Two parameters viz., heat/saline shock (20 min at 45 °C/1 M solid NaCl added at mid log phase and incubated for 1 h) and heat/saline tolerance (24 h growth at 45 °C/in 1 M NaCl) were studied. Under heat shock 13 upregulated proteins and 1 downregulated protein were identified and under tolerance 6 upregulated proteins were identified. GroES and GroEL proteins were expressed under both tolerance and shock. Under saline shock 11 upregulated proteins were identified whereas under saline tolerance 6 upregulated proteins were identified and all these proteins had pI between 3 and 10 with molecular weights ranging from 14.3 to 97 kDa. Aspartate carbamoyltransferase was common under both the saline conditions studied. The analysis revealed involvement of heat stress responsive molecular chaperones and membrane proteins during heat stress. During salt stress, proteins involved in metabolic processes were found to be upregulated to favor growth and adaptation of the bacterium. Heat shock chaperones viz., DnaK and DnaJ were expressed under both saline and heat stress. This is the first report of protein profile obtained from a single bacterium under saline and heat stress and the studies reveal the complex mechanisms adapted by the organism to survive under high temperature or saline conditions.

Bacteriostatic effect of sequential hydrodynamic and ultrasound-induced stress.

AIMS: To elucidate the mechanism of action of a nonchemical microbial control technology employing coupled hydrodynamic and ultrasound-induced stress. METHODS & RESULTS: The effects of a laboratory model system using a commercial nonchemical device on Pseudomonas putida revealed growth and respiration were inhibited without a loss of viability from the treated population. Damage to cell membranes was evident using fluorescent microscopy and a reporter strain containing lux genes fused with a membrane damage stress-response promoter. Other reporter strains also indicated the possible involvement of DNA and protein repair systems. A consequence of treatment was a reduced ability to form biofilms. CONCLUSIONS: The nonchemical device caused a biostatic effect on treated cells induced by sublethal damage to several cellular systems, including cell membranes. SIGNIFICANCE AND IMPACT OF THE STUDY: The study demonstrates that biostasis can be an effective mechanism for microbial control in some industrial systems and provides insight into understanding and applying this device and other nonchemical microbial control technologies to real-world problems of microbial contamination.

Membrane vesicle formation as a multiple-stress response mechanism enhances Pseudomonas putida DOT-T1E cell surface hydrophobicity and biofilm formation.

Among the adaptive responses of bacteria to rapid changes in environmental conditions, those of the cell envelope are known to be the most crucial. Therefore, several mechanisms with which bacteria change their cell surface and membranes in the presence of different environmental stresses have been elucidated. Among these mechanisms, the release of outer membrane vesicles (MV) in Gram-negative bacteria has attracted particular research interest because of its involvement in pathogenic processes, such as that of Pseudomonas aeruginosa biofilm formation in cystic fibrosis lungs. In this study, we investigated the role of MV formation as an adaptive response of Pseudomonas putida DOT-T1E to several environmental stress factors and correlated it to the formation of biofilms. In the presence of toxic concentrations of long-chain alcohols, under osmotic stress caused by NaCl, in the presence of EDTA, and after heat shock, cells of this strain released MV within 10 min in the presence of a stressor. The MV formed showed similar size and charge properties, as well as comparable compositions of proteins and fatty acids. MV release caused a significant increase in cell surface hydrophobicity, and an enhanced tendency to form biofilms was demonstrated in this study. Therefore, the release of MV as a stress response could be put in a physiological context.

Involvement of specialized DNA polymerases Pol II, Pol IV and DnaE2 in DNA replication in the absence of Pol I in Pseudomonas putida.

The majority of bacteria possess a different set of specialized DNA polymerases than those identified in the most common model organism Escherichia coli. Here, we have studied the ability of specialized DNA polymerases to substitute Pol I in DNA replication in Pseudomonas putida. Our results revealed that P. putida Pol I-deficient cells have severe growth defects in LB medium, which is accompanied by filamentous cell morphology. However, growth of Pol I-deficient bacteria on solid rich medium can be restored by reduction of reactive oxygen species in cells. Also, mutants with improved growth emerge rapidly. Similarly to the initial Pol I-deficient P. putida, its adapted derivatives express a moderate mutator phenotype, which indicates that DNA replication carried out in the absence of Pol I is erroneous both in the original Pol I-deficient bacteria and the adapted derivatives. Analysis of the spectra of spontaneous Rif(r) mutations in P. putida strains lacking different DNA polymerases revealed that the presence of specialized DNA polymerases Pol II and Pol IV influences the frequency of certain base substitutions in Pol I-proficient and Pol I-deficient backgrounds in opposite ways. Involvement of another specialized DNA polymerase DnaE2 in DNA replication in Pol I-deficient bacteria is stimulated by UV irradiation of bacteria, implying that DnaE2-provided translesion synthesis partially substitutes the absence of Pol I in cells containing heavily damaged DNA.

The pGRT1 plasmid of Pseudomonas putida DOT-T1E encodes functions relevant for survival under harsh conditions in the environment.

Pseudomonas putida DOT-T1E has the capacity to grow in the presence of high concentrations of toluene. This ability is mainly conferred by an efflux pump encoded in a self-transmissible 133 kb plasmid named pGRT1. Sequence analysis of the pGRT1 plasmid revealed several key features. Most of the genes related to the plasmid maintenance functions show similarity with those encoded on pBVIE04 from Burkholderia vietnamensis G4, and knock-out mutants in several of these genes confirmed their roles. Two additional plasmid DNA fragments were incorporated into the plasmid backbone by recombination and/or transposition; in these DNA regions, apart from multiple recombinases and transposases, several stress-related and environmentally relevant functions are encoded. We report that plasmid pGRT1 not only confers the cells with tolerance to toluene but also resistance to ultraviolet light. We show here the implication of a new protein in solvent tolerance which controls the level of expression of the TtgGHI efflux pump, as well as the implication of a protein with homology to the universal stress protein in solvent tolerance and ultraviolet light resistance. Furthermore, this plasmid encodes functions that allow the cells to chemotactically respond to toluene and participate in iron scavenging.

Characterization of melanin-overproducing transposon mutants of Pseudomonas putida F6.

Two melanin-overproducing Pseudomonas putida F6 mutants were generated using transposon (Tn5) mutagenesis. Mutants were disrupted in a transcriptional regulator (TR) and a homogentisate 1,2-dioxygenase (HDO) gene. Colonies of mutant F6-TR overproduced a black pigment on solid medium. The same mutant (F6-TR) had a 3.7-fold higher tyrosinase activity compared with the wild-type strain when induced with ferulic acid. However in tyrosine uptake assays whole cells of the mutant strain F6-TR consumed eight times less tyrosine compared with the wild-type strain. Mutant F6-HDO produced a diffusible red pigment into the growth medium. Pigment production by mutant F6-HDO is sixfold higher than the wild-type strain. The biomass yield of mutant F6-HDO grown on tyrosine as the sole source of carbon and energy was 1.2-fold lower than the wild-type strain. While the growth of the wild-type strain was completely inhibited by 5 min of exposure to UV light (254 nm) both mutant strains showed survival rates >30%. Mutant F6-HDO was able to tolerate higher concentrations of hydrogen peroxide (H(2)O(2)) exhibiting 1.5 times smaller zones of inhibition at 10 mM H(2)O(2) compared with mutant F6-TR and the wild-type strain. The pigments produced by all strains were purified and confirmed to be melanins.

Confirming Pseudomonas putida as a reliable bioassay for demonstrating biocompatibility enhancement by solar photo-oxidative processes of a biorecalcitrant effluent.

Experiments based on Vibrio fischeri, activated sludge and Pseudomonas putida have been employed to check variation in the biocompatibility of an aqueous solution of a commercial pesticide, along solar photo-oxidative process (TiO(2) and Fenton reagent). Activated sludge-based experiments have demonstrated a complete detoxification of the solution, although important toxicity is still detected according to the more sensitive V. fischeri assays. In parallel, the biodegradability of organic matter is strongly enhanced, with BOD(5)/COD ratio above 0.8. Bioassays run with P. putida have given similar trends, remarking the convenience of using P. putida culture as a reliable and reproducible method for assessing both toxicity and biodegradability, as a substitute to other more time consuming methods.

Combined photo-Fenton and biological oxidation for pesticide degradation: effect of photo-treated intermediates on biodegradation kinetics.

Biodegradability of a partially photo-oxidized pesticide mixture is demonstrated and the effect of photo-Fenton treatment time on growth and substrate consumption of the bacteria Pseudomonas putida CECT 324 is shown. Four commercial pesticides, laition, metasystox, sevnol and ultracid, usually employed in citric orchards in eastern Spain, were chosen for these experiments. The active ingredients are, respectively, dimethoate, oxydemeton-methyl, carbaryl and methidathion. Judging by biomass measurements, dissolved organic carbon measurements and biodegradation efficiency, it may be concluded that 90min

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces.

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit (invitrogen, molecular probes) was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on Al plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast (Saccharomyces cerevisiae), Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green (viable), green with red or yellow nuclei and yellow (compromised) or red (nonviable). According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 (Ag, Pt, Au, Cu) possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.