Polyphasic identification of Rhizopus oryzae and evaluation of physical fermentation parameters in potato starch processing liquid waste for ß-glucan production.

Β-glucans are polysaccharide macromolecules that can be found in the cell walls of molds, such as Rhizopus oryzae. They provide functional properties in food systems and have immunomodulatory activity, anticancer, and prebiotic effects; reduce triglycerides and cholesterol; and prevent obesity, among others benefits. Furthermore, potato starch production requires a large amount of water, which is usually discharged into the environment, creating problems in soils and bodies of water. The physical parameters to produce ß-glucans were determined, liquid waste from potato starch processing was used and native Rhizopus oryzae was isolated and identified from cereal grains. The isolates grew quickly on the three types of agars used at 25 °C and 37 °C, and they did not grow at 45 °C. Rhizopus oryzae M10A1 produced the greatest amount of ß-glucans after six days of culture at 30 °C, pH 6, a stirring rate of 150 rpm and a fermentation volume of 250 mL. By establishing the physical fermentation parameters and utilizing the liquid waste from potato starch, Rhizopus oryzae M10A1 yielded 397.50 mg/100 g of ß-glucan was obtained.

Enhancing the Thermostability and Catalytic Activity of the Lipase from Rhizopus oryzae via Introducing N-Glycosylation.

Lipase from Rhizopus oryzae (ROL) exhibits remarkable sn-1,3 stereoselectivity and catalytic activity, but its poor thermostability limits its applications in the production of 1,3-dioleoyl-2-palmitoyl glycerol (OPO, a high-quality substitute for human milk fat). In this work, a semirational method was proposed to engineer the thermostability and catalytic activity of 4M (ROL mutant in our previous study). First, a computer-aided design is performed using 4M as a template, and N-glycosylation mutants are then recombinantly expressed and screened in Pichia pastoris, the optimal mutant N227 exhibited a half-life of 298.8 h at 45 °C, which is 7.23-folds longer than that of 4M. Its catalytic activity also reached 1043.80 ± 61.98 U/mg, representing a 29.2% increase compared to 4M (808.02 ± 47.02 U/mg). Molecular dynamics simulations of N227 suggested that the introduction of glycan enhanced the protein rigidity, while the strong hydrogen bonds formed between the glycan and the protein stabilized the lipase structure, thereby improving its thermostability. The acidolysis reaction between oleic acid (OA) and glycerol tripalmitate (PPP) was successfully carried out using immobilized N227, achieving a molar conversion rate of 90.2% for PPP. This engineering strategy guides the modification of lipases, while the glycomutants obtained in this study have potential applications in the biosynthesis of OPO.

Production of Rhizopus oryzae lipase using optimized Yarrowia lipolytica expression system.

Yarrowia lipolytica is an alternative yeast for heterologous protein production. Based on auto-cloning vectors, a set of 18 chromogenic cloning vectors was developed, each containing one of the excisable auxotrophic selective markers URA3ex, LYS5ex, and LEU2ex, and one of six different promoters: the constitutive pTEF, the phase dependent hybrid pHp4d, and the erythritol-inducible promoters from pEYK1 and pEYL1 derivatives. These vectors allowed to increase the speed of cloning of the gene of interest. In parallel, an improved new rProt recipient strain JMY8647 was developed by abolishing filamentation and introducing an auxotrophy for lysine (Lys-), providing an additional marker for genetic engineering. Using this cloning strategy, the optimal targeting sequence for Rhizopus oryzae ROL lipase secretion was determined. Among the eight targeting sequences, the SP6 signal sequence resulted in a 23% improvement in the lipase activity compared to that obtained with the wild-type ROL signal sequence. Higher specific lipase activities were obtained using hybrid erythritol-inducible promoters pHU8EYK and pEYL1-5AB, 1.9 and 2.2 times, respectively, when compared with the constitutive pTEF promoter. Two copy strains produce a 3.3 fold increase in lipase activity over the pTEF monocopy strain (266.7 versus 79.7 mU/mg).

Alteration of Chain-Length Selectivity and Thermostability of Rhizopus oryzae Lipase via Virtual Saturation Mutagenesis Coupled with Disulfide Bond Design.

Rhizopus oryzae lipase (ROL) is one of the most important enzymes used in the food, biofuel, and pharmaceutical industries. However, the highly demanding conditions of industrial processes can reduce its stability and activity. To seek a feasible method to improve both the catalytic activity and the thermostability of this lipase, first, the structure of ROL was divided into catalytic and noncatalytic regions by identifying critical amino acids in the crevice-like binding pocket. Second, a mutant screening library aimed at improvement of ROL catalytic performance by virtual saturation mutagenesis of residues in the catalytic region was constructed based on Rosetta's Cartesian_ddg protocol. A double mutant, E265V/S267W (with an E-to-V change at residue 265 and an S-to-W change at residue 267), with markedly improved catalytic activity toward diverse chain-length fatty acid esters was identified. Then, computational design of disulfide bonds was conducted for the noncatalytic amino acids of E265V/S267W, and two potential disulfide bonds, S61C-S115C and E190C-E238C, were identified as candidates. Experimental data validated that the variant E265V/S267W/S61C-S115C/E190C-E238C had superior stability, with an increase of 8.5°C in the melting temperature and a half-life of 31.7 min at 60°C, 4.2-fold longer than that of the wild-type enzyme. Moreover, the variant improved the lipase activity toward five 4-nitrophenyl esters by 1.5 to 3.8 times, exhibiting a potential to modify the catalytic efficiency. IMPORTANCE Rhizopus oryzae lipase (ROL) is very attractive in biotechnology and industry as a safe and environmentally friendly biocatalyst. Functional expression of ROL in Escherichia coli facilitates effective high-throughput screening for positive variants. This work highlights a method to improve both selectivity and thermostability based on a combination of virtual saturation mutagenesis in the substrate pocket and disulfide bond prediction in the noncatalytic region. Using the method, ROL thermostability and activity to diverse 4-nitrophenyl esters could be substantially improved. The strategy of rational introduction of multiple mutations in different functional domains of the enzyme is a great prospect in the modification of biocatalysts.

A Comprehensive in vitro and in silico Assessment on Inhibition of CYP51B and Ergosterol Biosynthesis by Eugenol in Rhizopus oryzae.

Mucormycosis, also known as Zygomycosis, is a disease caused by invasive fungi, predominantly Rhizopus species belonging to the Order of Mucorales. Seeing from the chemistry perspective, heterocyclic compounds with an "azole" moiety are widely employed as antifungal agent for minimising the effect of mucormycosis as a prescribed treatment. These azoles serve as non-competitive inhibitors of fungal CYP51B by predominantly binding to its heme moiety, rendering its inhibition. However, long-term usage and abuse of azoles as antifungal medicines has resulted in drug resistance among certain fungal pathogens. Hence, there is an unmet need to find alternative therapeutic compounds. In present study, we used various in vitro tests to investigate the antifungal activity of eugenol against R. oryzae/R. arrhizus, including ergosterol quantification to test inhibition of ergosterol production mediated antifungal action. The minimum inhibitory concentration (MIC) value obtained for eugenol was 512 µg/ml with reduced ergosterol concentration of 77.11 ± 3.25% at MIC/2 concentration. Further, the molecular interactions of eugenol with fungal CYP51B were meticulously studied making use of proteomics in silico study including molecular docking and molecular dynamics simulations that showed eugenol to be strongly interacting with heme in an identical fashion to that shown by azole drugs (in this case, clotrimazole was evaluated). This is the first of a kind study showing the simulation study of eugenol with CYP51B of fungi. This inhibition results in ergosterol synthesis and is also studied and compared with keeping clotrimazole as a reference.

Fractionation of dicarboxylic acids produced by Rhizopus oryzae using reactive extraction.

Fumaric, malic, and succinic acids have been selectively separated from their mixture obtained by Rhizopus oryzae fermentation using reactive extraction with Amberlite LA-2 dissolved in three solvents with different dielectric constants (n-heptane, n-butyl acetate, and dichloromethane). This technique allows recovering preferentially fumaric acid from the mixture, the raffinate containing only malic and succinic acids. The extractant concentration and organic phase polarity control the efficiency and selectivity of acids extraction. The increase of aqueous phase viscosity reduces the extraction yield for all studied acids, but exhibits a positively effect on separation selectivity. By using Amberlite LA-2 concentration equal to that stoichiometrically required for interfacial reaction with fumaric acid and mixing intensity which does not allow higher diffusion rates for larger molecules (malic and succinic acids), the maximum value of fumaric acid extraction rate exceeds 90%, while the selectivity factor value becomes 20. Regardless of the extraction system, the complete separation of fumaric acid from their mixture is possible by multi-stage extraction process, adjusting the extractant concentration in each stage. At higher values of aqueous phase viscosity, more extraction stages are required, while the increase of solvent polarity reduce the required number of stages for total recovery of fumaric acid.

Functional properties of Rhizopus oryzae strains isolated from agricultural soils as a potential probiotic for broiler feed fermentation.

The most crucial and expensive fragment in the broiler chicken production industry is the feed. Because of the rising demand, finding a cheap and effective feed is an urgent necessity. Fermentation of broiler feed by probiotic fungal starters can enhance the nutrient's availability and digestibility while preventing pathogenic growth. In this study different Rhizopus spp. have been isolated from agricultural soils around Izmir, Turkey, and tested for their probiotic potential and fermentative capacity. The isolated Rhizopus strains first underwent microscopical fluorescent investigation to exclude endofungal bacterial presence, then, those without endofungal bacteria (totally 82) were tested for antimicrobial activity counter bacterial and fungal pathogens. The ones with wide-spectrum antimicrobial activity (totally 10) were tested for gastrointestinal tolerance and antioxidant ability. Upon phenotypic and genotypic identification, the 10 isolates were found to belong to Rhizopus oryzae species. While all 10 strains showed variable gastrointestinal tolerance and antioxidant activities, three of them (92/1, 236/2, and 284) had relatively high antioxidant activity. Upon fermentative capacity assay, compared to unfermented commercial feed, there was a general decrease in crude fiber content by 56% after fermentation by 92/1 isolate for 4 days and 236/2 isolate for 2 days. The highest increase in crude protein content (by 14.5%) occurred after a 4-day fermentation period by 236/2 isolate. The highest increase in metabolizable energy was 8.64%, by the 284 isolate after 2 days of fermentation. In conclusion, the three strains showed good probiotic properties and fermentative capacities hence can be beneficial for the poultry industry.

Biotransformation of Betulonic Acid by the Fungus Rhizopus arrhizus CGMCC 3.868 and Antineuroinflammatory Activity of the Biotransformation Products.

Biotransformation of betulonic acid (1) by Rhizopus arrhizus CGMCC 3.868 resulted in the production of 16 new (3, 5, 6, and 9-21) and five known compounds. Structures of the new compounds were established by analysis of spectroscopic data. Hydroxylation, acetylation, oxygenation, glycosylation, and addition reactions involved the C-20-C-29 double bond. Antineuroinflammatory activities of the obtained compounds in NO production were tested in lipopolysaccharides-induced BV-2 cells. Compared with the substrate betulonic acid, biotransformation products 3, 8, 9, 14, and 21 exhibited an improved inhibitory effect, with IC50 values of 10.26, 11.09, 5.38, 1.55, and 4.69 µM, lower than that of the positive control, NG-monomethyl-l-arginine.

Biosynthesis and characterization of deuterated chitosan in filamentous fungus and yeast.

Deuterated chitosan was produced from the filamentous fungus Rhizopus oryzae, cultivated with deuterated glucose in H2O medium, without the need for conventional chemical deacetylation. After extraction and purification, the chemical composition and structure were determined by Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and small-angle neutron scattering (SANS). 13C NMR experiments provided additional information about the position of the deuterons in the glucoseamine backbone. The NMR spectra indicated that the deuterium incorporation at the non-exchangeable hydrogen positions of the aminoglucopyranosyl ring in the C3 - C5 positions was at least 60-80 %. However, the C2 position was deuterated at a much lower level (6%). Also, SANS showed that the structure of deuterated chitosan was very similar compared to the non-deuterated counterpart. The most abundant radii of the protiated and deuterated chitosan fibers were 54 Å and 60 Å, respectively, but there is a broader distribution of fiber radii in the protiated chitosan sample. The highly deuterated, soluble fungal chitosan described here can be used as a model material for studying chitosan-enzyme complexes for future neutron scattering studies. Because the physical behavior of non-deuterated fungal chitosan mimicked that of shrimp shell chitosan, the methods presented here represent a new approach to producing a high quality deuterated non-animal-derived aminopolysaccharide for studying the structure-function association of biocomposite materials in drug delivery, tissue engineering and other bioactive chitosan-based composites.

Development of a novel multi-strain wheat Qu with high enzyme activities for Huangjiu fermentation.

BACKGROUND: Wheat Qu has long been used as a fermentation starter to produce Huangjiu. Wheat Qu quality depends on its microbial community structure and the hydrolytic enzymes generated by the micro-organisms. RESULTS: Strain YF1 and YF2 were successfully screened as they exhibited high acidic protease (231.9 ± 1.4 U g-1 ) and cellulase (7.1 ± 0.6 U g-1 ) activities. Based on a morphological and sequence analysis of the internal transcribed spacer (ITS) gene, YF1 and YF2 were identified as Rhizopus oryzae and Aspergillus niger, respectively. Cooked wheat Qu was produced using mixed fungal starter fermentations with Aspergillus oryzae SU-16, YF1, and YF2. For Qu-making, the optimized conditions for fermentation time, water content, and inoculum size were 47.8 h, 69.4%, and 6.1%, respectively. Under these conditions, compared with single-strain cooked wheat Qu, enzyme activities of amylase, acidic protease, and cellulase increased by 27.4%, 657.1%, and 1276.2%, respectively. Short peptides and free amino acids contents increased by 19.6% and 131.8%, respectively. This wheat Qu was used for Huangjiu brewing, and the alcohol content increased by approximately 14.6% because of the increased starch hydrolysis efficiency mainly attributed to its high enzyme activity. CONCLUSION: Using mixed fungal strains as starter cultures may be an efficient strategy to improve wheat Qu quality, with great potential for application in industrial Huangjiu production. © 2021 Society of Chemical Industry.