Detection of Maize Mold Based on a Nanocomposite Colorimetric Sensor Array under Different Substrates.

This study developed a novel nanocomposite colorimetric sensor array (CSA) to distinguish between fresh and moldy maize. First, the headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC/MS) method was used to analyze volatile organic compounds (VOCs) in fresh and moldy maize samples. Then, principal component analysis and orthogonal partial least-squares discriminant analysis (OPLS-DA) were used to identify 2-methylbutyric acid and undecane as key VOCs associated with moldy maize. Furthermore, colorimetric sensitive dyes modified with different nanoparticles were employed to enhance the dye properties used in the nanocomposite CSA analysis of key VOCs. This study focused on synthesizing four types of nanoparticles: polystyrene acrylic (PSA), porous silica nanospheres (PSNs), zeolitic imidazolate framework-8 (ZIF-8), and ZIF-8 after etching. Additionally, three types of substrates, qualitative filter paper, polyvinylidene fluoride film, and thin-layer chromatography silica gel, were comparatively used to fabricate nanocomposite CSA combining with linear discriminant analysis (LDA) and K-nearest neighbor (KNN) models for real sample detection. All moldy maize samples were correctly identified and prepared to characterize the properties of the CSA. Through initial testing and nanoenhancement of the chosen dyes, four nanocomposite colorimetric sensitive dyes were confirmed. The accuracy rates for LDA and KNN models in this study reached 100%. This work shows great potential for grain quality control using CSA methods.

Modern automated microextraction procedures for bioanalytical, environmental, and food analyses.

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

A Small Footprint and Robust Interface for Solid Phase Microextraction and Mass Spectrometry Based on Vibrating Sharp-Edge Spray Ionization.

Combining solid phase microextraction (SPME) and mass spectrometry (MS) analysis has become increasingly important to many bioanalytical, environmental, and forensic applications due to its simplicity, rapid analysis, and capability of reducing matrix effects for complex samples. To further promote the adoption of SPME-MS based analysis and expand its application scope calls for efficient and convenient interfaces that couple the SPME sample handling with the efficient analyte ionization for MS. Here, we report a novel interface that integrates both the desorption and the ionization steps in one device based on the capillary vibrating sharp-edge spray ionization (cVSSI) method. We demonstrated that the cVSSI is capable of nebulizing liquid samples in a pulled-tip glass capillary with a battery powered function generator. The cVSSI device allows the insertion of a SPME probe into the spray capillary for desorption and then direct nebulization of the desorption solvent in situ. With the integrated interface, we have demonstrated rapid MS analysis of drug compounds from serum samples. Quantitative determination of various drug compounds including metoprolol, pindolol, acebutolol, oxprenolol, capecitabine, and irinotecan was achieved with good linearity (R2 = 0.97-0.99) and limit of detection ranging from 0.25 to 0.59 ng/mL without using a high voltage source. Only 3.5 µL of desorption solvent and 3 min desorption time were needed for the present method. Overall, we demonstrated a portable SPME-MS interface featuring high sensitivity, short analysis time, small footprint, and low cost, which makes it an attractive method for many applications requiring sample cleanup including drug compound monitoring, environmental sample analysis, and forensic sample analysis.

Wooden-based materials: Eco-friendly materials for direct mass spectrometric analysis and microextraction.

Lignocellulosic materials have arisen as a sustainable alternative in microextraction techniques during the last 10 years. As they are natural materials, their use fits into some of the principles of Green Analytical Chemistry. Their inherent porosity, narrow shape, and rigidity permit their use in ambient ionization mass spectrometry techniques. In particular, the combination of wooden-based materials and direct analysis gives birth to the so-called wooden-tip electrospray ionization mass spectrometry technique. This approach has been used for the direct analysis of complex samples, and as a streamlined tool for fingerprint quality analysis. Also, wooden-based materials can be superficially modified to boost the interaction with target compounds, allowing their isolation from complex samples. This review describes the potential and applicability of direct analysis using lignocellulosic materials, as well as other alternatives related to their use in microextraction.

Comparison of Volatile Organic Compounds of Sideritis romana L. and Sideritis montana L. from Croatia.

A study on the headspace volatile organic compounds (VOCs) profile of native populations of Sideritis romana L. and Sidertis montana L., Lamiaceae, from Croatia is reported herein, to elucidate the phytochemical composition of taxa from this plant genus, well-known for traditional use in countries of the Mediterranean and the Balkan region. Headspace solid-phase microextraction (HS-SPME), using divinylbenzene/carboxene/polydimethylsiloxane (DVB/CAR/PDMS) or polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber, coupled with gas chromatography-mass spectrometry (GC-MS) was applied to analyze the dried aerial parts of six native populations in total. Furthermore, principal component analysis (PCA) was conducted on the volatile constituents with an average relative percentage ≥1.0% in at least one of the samples. Clear separation between the two species was obtained using both fiber types. The VOCs profile for all investigated populations was characterized by sesquiterpene hydrocarbons, followed by monoterpene hydrocarbons, except for one population of S. romana, in which monoterpene hydrocarbons predominated. To our knowledge, this is the first report on the VOCs composition of natural populations of S. romana and S. montana from Croatia as well as the first reported HS-SPME/GC-MS analysis of S. romana and S. montana worldwide.

Temperature and time-controlled hydrothermal growth and sorption selectivity of titania nanowires on titanium fiber for highly efficient solid-phase microextraction.

Two kinds of TiO2 nanowires (TiO2NWs) with different orientation were in-situ grown on Ti substrates by controlling temperature and time during the hydrothermal process. The adsorption performance was evaluated by using typical aromatic compounds as model analytes coupled to HPLC with UV detection. The results demonstrated that the TiO2NWs coating grown at higher temperature within longer time had better affinity towards PAHs. For this purpose, the key experimental factors affecting the adsorption performance of the TiO2NWs coating fabricated at 200 °C for 10 h were further investigated and optimized for the extraction of PAHs. Under the optimized conditions, the proposed method presented linear responses in the concentration ranges of 0.05 to 200 µg·L-1 PAHs with correlation coefficients more than 0.998. LODs (S/N=3) were 0.008 to 0.034 µg·L-1. Moreover, RSDs for the single fiber repeatability of the intra-day and the inter-day analyses were less than 5.6% (n=5) and 5.8%, respectively. RSDs for the fiber-to-fiber reproducibility were between 5.1% and 6.5%. Finally, the proposed method was successfully applied to the selective preconcentration and determination of trace PAHs in environmental water samples. In addition, The fabricated Ti fiber can be used at least 200 times due to its high mechanical and chemical stability.

Simultaneous trace-level monitoring of seven opioid analgesic drugs in biological samples by pipette-tip micro solid phase extraction based on PVA-PAA/CNT-CNC composite nanofibers followed by HPLC-UV analysis.

Electrospun poly(vinyl alcohol)-(PVA)-poly(acrylic acid) (PAA)/carbon nanotubes(CNTs)-cellulose nanocrystal (CNC) (PVA-PAA/CNT-CNC) composite nanofibers were prepared and characterized using Fourier transform-infrared spectroscopy and field emission scanning electron microscopy. The resultant composite was used as an effective and novel sorbent for pipette-tip micro-solid phase extraction (PT-µSPE) of seven opioid analgesics (OAs) in biological samples followed by HPLC-UV analysis. Addition of CNT-CNC with the high specific surface area and plenty of OH-functional groups endows the nanofibers with considerable extraction efficiency. Under the optimum conditions, the linearity was obtained in the range 1.5 to 700.0 ng mL-1 for morphine, codeine, oxycodone, and tramadol, and 0.5 to 1000.0 ng mL-1 for nalbuphine, thebaine, and noscapine with coefficient of determination (r2) ≥ 0.9990. Detection limits (LODs) based on S/N = 3 were in the range of 0.15-0.50 ng mL-1. The relative standard deviations (RSDs) of 4.1-5.4% (intra-day, n = 5) and 5.2-6.4% (inter-day, n = 3) for three consecutive days were achieved. Finally, the efficiency of the PT-µSPE-HPLC-UV method was evaluated for the determination of OAs in human plasma and urine samples with good recoveries (87.3 to 97.8%). A: Schematic illustration for the preparation of PVA-PAA/CNT-CNC composite nanofibers. B: Schematic presentation of applying PVA-PAA/CNT-CNC composite nanofibers as the sorbent in pipette-tip micro solid-phase extraction (PT-µSPE) for the preconcentration of seven opioid analgesic drugs in biological samples before HPLC-UV analysis.

Development of a syringe membrane-based microextraction method based on metal-organic framework mixed-matrix membranes for preconcentration/extraction of polycyclic aromatic hydrocarbons in tea infusion.

Inevitably, the residues of polycyclic aromatic hydrocarbons (PAHs) in tea leaves will be transferred to hot tea infusion, constituting a certain drinking risk; consequently, it is imperative to develop rapid, sensitive, and robust approaches for their trace-level detection. Herein, we developed a syringe membrane-based microextraction (SMME) method for preconcentration/extraction of PAHs in tea infusions. This method utilized metal-organic framework-mixed matrix membranes (MOF-MMMs) as adsorbents, which anchored the nanoparticles of MOFs onto the surface of PVDF membrane. The UiO-66 (Zr)-based MMM possessed high Brunauer-Emmett-Teller (BET) surface area (320.5 m2 g-1) and pore volume (0.18 cm3 g-1), thus enhancing extraction/adsorption efficiency. Under optimized conditions, the limits of detection for PAHs reached as low as 0.02-0.08 µg L-1 with extraction recoveries of 85.5-102.1%, and the inter-day and intra-day precision was lower than 8.4% in tea infusions. Consequently, the SMME/HPLC-DAD method shows a great potential in conventional monitoring of PAHs in tea samples.

Customized dispersive micro-solid-phase extraction device combined with micro-desorption for the simultaneous determination of 39 multiclass pesticides in environmental water samples.

A dispersive micro-solid phase extraction (d-µ-SPE) procedure was developed for the simultaneous extraction of 39 multiclass pesticides, containing a variety of chemical groups (organophosphate, organochlorine, pyrethroid, strobilurin, thiocarbamate, triazole, imidazole, and triazine), from water samples. A customized d-µ-SPE glass device was combined with a multi-tube platform vortex and a micro-desorption unit (Whatman Mini-UniPrep G2 syringeless filter), which allowed the unique simultaneous desorption, extract filtration, and injection. A simplex-centroid mixture design and Doehlert design were employed to optimize the extraction conditions. The optimized extraction conditions consisted of an extraction time of 30 min, an addition of 6.74 % of NaCl into 100 mL of water sample, and a desorption time of 24 min with 500 µL of EtAc. The procedure provided a low limit of detection (LOD), ranging from 0.51 ng L-1 (4,4-DDE) to 22.4 ng L-1 (dimethoate), and an enrichment factor ranging from 72.5 (dimethoate) to 200 (tebuconazole). The relative recoveries of the pesticides from spiked freshwater and seawater ranged from 74.2 % (endrin) to 123 % (molinate). The proposed procedure was applied to detect the presence of multiclass pesticides in environmental water samples. Three pesticides commonly applied in Brazil, namely, malathion, dimethoate, and lambda-cyhalothrin, were detected in concentrations ranging from

Analysis of food samples made easy by microextraction technologies directly coupled to mass spectrometry.

Because of the complexity and diversity of food matrices, their chemical analysis often entails several analytical challenges to attain accurate and reliable results, especially for multiresidue analysis and ultratrace quantification. Nonetheless, microextraction technology, such as solid-phase microextraction (SPME), has revolutionized the concept of sample preparation for complex matrices because of its nonexhaustive, yet quantitative extraction approach and its amenability to coupling to multiple analytical platforms. In recent years, microextraction devices directly interfaced with mass spectrometry (MS) have redefined the analytical workflow by providing faster screening and quantitative methods for complex matrices. This review will discuss the latest developments in the field of food analysis by means of microextraction approaches directly coupled to MS. One key feature that differentiates SPME-MS approaches from other ambient MS techniques is the use of matrix compatible extraction phases that prevent biofouling, which could drastically affect the ionization process and are still capable of selective extraction of the targeted analytes from the food matrix. Furthermore, the review examines the most significant applications of SPME-MS for various ionization techniques such as direct analysis in real time, dielectric barrier desorption ionization, and some unique SPME geometries, for example, transmission mode SPME and coated blade spray, that facilitate the interface to MS instrumentation.

Electrochemically controlled solid phase microextraction based on a conductive polyaniline-graphene oxide nanocomposite for extraction of tetracyclines in milk and water.

BACKGROUND: Tetracycline antibiotics are employed for human and animal health and for speeding up growth rates. However, their presence in food products and environmental waters has been a concern for some years. Therefore, a variety of sample preparation methods have been developed for the analysis of tetracycline residues in these matrices. RESULTS: An electrochemically controlled solid phase microextraction based on a modified copper electrode with polyaniline/graphene oxide (PANI/GO) conductive nanocomposite was developed for the extraction of oxytetracycline, tetracycline and doxycycline before high-performance liquid chromatography-UV analysis. PANI/GO was synthesized by in situ chemical oxidative polymerization, characterized by scanning electron microscopy and Fourier-transform infrared spectroscopy, and bound on the electrode using high purity conductive double-sided adhesive carbon glue. The significant factors affecting the performance of microextraction were investigated and optimized. Under the optimized conditions [sample, 15 mL; sorbent, 10 mg; pH, 3.0; electroextraction voltage, -0.9 V; electroextraction time, 20 min; eluent (MeOH/NH3 ), 500 µL; and desorption time, 5 min], the limits of detection for target analytes were in the ranges 0.32-1.01 and 2.42-7.59 µg L-1 in water and milk samples, respectively. The linear ranges were 1.06-750 µg L-1 for water and 8.05-750 µg L-1 for milk samples. The intra-day and inter-day precisions were 2.32-3.80 and 3.29-4.25, respectively. The method was applied to the determination of analytes in milk and water samples with different fat contents, and the recoveries were obtained in the range 71-104%. CONCLUSION: The developed electro-microextraction method provides a facile, rapid, cost-effective, sensitive and efficient promising procedure for the extraction of antibiotics in complex matrices. © 2020 Society of Chemical Industry.

Analysis of Hop-Derived Thiols in Beer Using On-Fiber Derivatization in Combination with HS-SPME and GC-MS/MS.

The quantitation of the hop varietal thiols 4-mercapto-4-methyl-2-pentanone (4MMP), 3-mercapto-1-hexanol (3MH), and 3-mercaptohexylacetate (3MHA) from beer is challenging. This primarily relates to their low concentration (ng/L levels) and their reactivity. Published assays for thiol quantitation from beer include complex and/or time-consuming sample preparation procedures involving manual handling and use reagents that are harmful because they contain mercury. To facilitate thiol analysis from beer, the current article is concerned with the implementation of an automated headspace solid-phase microextraction (HS-SPME) on-fiber derivatization (OFD) approach using 2,3,4,5,6-pentafluorobenzyl bromide followed by gas chromatography-tandem mass spectrometry (GC-MS/MS). Optimization of HS-SPME and MRM conditions was based on a central composite design approach. The final OFD-HS-SPME-GC-MS/MS method yielded limits of quantitation below the sensory thresholds of 4MMP, 3MH, and 3MHA. Method validation and application on beers brewed with German, Australian, and US hops, as well as with added fruits displayed excellent method performance.

Nanomaterials-based solid phase extraction and solid phase microextraction for heavy metals food toxicity.

In the last few years, nanomaterials are widely used sorbents for the extraction of heavy metals in food samples. The nanomaterials have a larger surface area and show high selectivity, fast adsorption capability, and high efficiency for food contaminants (heavy metals). Carbon nanomaterials (CNMs), magnetic nanoparticles (MNPs), nano-imprinted polymers (NIPs), nano-based metal-organic frameworks (N-MOFs), and silica nanoparticles (SiNPs) are most prominent nanomaterials used in the preconcentration and determination of heavy metals. The most popular sorbent-based techniques for the extraction of heavy metals are solid phase extraction (SPE) and solid phase microextraction (SPME). The use of these nanomaterial sorbents increases the extraction efficiency of both techniques. This review summarizes the nanomaterial sorbents (published 2015 to May-2020) used in solid phase extraction (SPE) and solid phase microextraction (SPME) for heavy metals extraction in food.

A micro-solid phase extraction device to prepare a molecularly imprinted porous monolith in a facile mode for fast protein separation.

A molecularly imprinted polymeric monolith was synthesized in an aqueous environment in 15 min via UV-irradiation. The imprinted monolith was composed of hydroxyethyl methacrylate as monomer, dimethyl amino ethyl methacrylate as functional monomer, methylene bisacrylamide and piperazine diacrylamide as crosslinkers and human serum albumin as template molecule. The synthesis took place in a PDMS-based device (2.5 cm long) yielding a micro-solid phase extraction column (3 × 5 mm) with two built-in fingertight connectors for an infusion pump and fraction collector. The imprinted monolith displayed the characteristic features of a porous polymeric monolith, had dimethyl amino ethyl methacrylate and human serum albumin as functional groups within the monolith and showed high permeability (0.51 × 10-13 m2). 85% of the imprinted cavities were readily available for rebinding of human serum albumin with an imprinting factor of 1.3. In comparison to a non-imprinted monolith, molecular imprinting increased human serum albumin adsorption by > 30%. Imprinted monolith displayed selectivity for human serum albumin over other competing proteins (human transferrin, ovalbumin and carbonic anhydrase) with similar or different isoelectric points and size. Human serum albumin was adsorbed (in dynamic mode) with > 98% selectivity from diluted human plasma using the imprinted monolith device. Device to device reproducibility and reusability of the device for 5 cycles showcase the imprinted monolith micro-device efficiency.

Covalent Organic Frameworks-Based Solid-Phase Microextraction Probe for Rapid and Ultrasensitive Analysis of Trace Per- and Polyfluoroalkyl Substances Using Mass Spectrometry.

Rapid and ultrasensitive analysis of trace pollutants in complex matrices is of significance for understanding their environmental behaviors and toxic effects. Here a novel method based on the integration of solid-phase microextraction (SPME) and nanoelectrospray ionization mass spectrometry (nanoESI-MS) was developed for rapid and ultrasensitive analysis of trace per- and polyfluoroalkyl substances (PFASs) in environmental and biological samples. A novel SPME probe with F-functionalized covalent organic frameworks (COFs) coating was designed for highly selective enrichment of trace PFASs from complex samples. After extraction, the loaded COFs-SPME probe was directly appplied to nanoESI-MS analysis under ambient and open-air conditions. The method showed satisfactory linearities between 1 and 5000 ng/L for 14 investigated PFASs in water, with correlation coefficient values no less than 0.9952. The limits of detection and quantification varied from 0.02 to 0.8 ng/L and 0.06 to 3 ng/L, respectively. By using the proposed method, ultrasensitive detection of PFASs in environmental water and whole blood was successfully achieved.

In vivo solid-phase microextraction swab sampling of environmental pollutants and drugs in human body for nano-electrospray ionization mass spectrometry analysis.

In vivo sampling and sensitive detection of environmental pollutants and drugs in human body play a crucial role in understanding human health. In this study, in vivo solid-phase microextraction (SPME) swab was fabricated using a SPME fiber and a medical cotton swab for noninvasive sampling and extraction of environmental pollutants and drugs in human oral cavity, nasal cavity and on skin surface. After sampling, SPME was coupled with nano-electrospray ionization mass spectrometry (nanoESI-MS) for desorption, ionization, and detection of the extracted analytes. As a result, limit of detection (LOD) and limit of quantification (LOQ) of nicotine in oral fluid were found to be 1.0 pg/mL (S/N ≥ 3) and 4.0 pg/mL (S/N ≥ 10), respectively. Linear dynamic signal responses of nicotine exhibited excellent linearity (R2 = 0.9996) in human oral fluid ranging from 0.1 to 50 ng/mL. The coefficient of variation (CV) values of SPME swab for five measurements from sample vials and human body were 5.1-6.7% and 22.7-32.6%, respectively. Rapid analysis of a single sample could be completed within 10 min. Overall, our results demonstrated that SPME swab-MS is a promising noninvasive method for enhanced detection of analytes in human body.

Bar adsorptive microextraction device coated with polyimide microsphere assembled by nanosheets combined with thermal desorption-gas chromatography for trace analysis of nitroaromatic explosives in environmental waters.

Polyimide (PI) microspheres assembled by nanosheets were used for bar adsorptive microextraction (BAµE) for the first time. The PI microsphere possessed self-organized hierarchical nanostructure, large specific surface area (170 m2/g) and good thermostability (up to 400 °C). The BAµE device was prepared by adhering the PI microspheres on a quartz bar with Kapton double sided tape. Trace nitroaromatic explosives in environmental waters were extracted by the BAµE device, desorbed by thermal desorption (TD), and analyzed by gas chromatography-mass spectrometry (GC-MS). The reproducibility of five BAµE devices prepared in parallel was less than 13.0% (expressed as relative standard deviation, RSD). The BAµE device could stand up to 30 extraction/desorption cycles without decrease of extraction efficiency. The results of method validation showed that the BAµE-TD/GC-MS method possessed wide linearity (0.05-50 µg/L or 0.05-20 µg/L), high correlation coefficients (> 0.9987), good precision (RSDs < 11.8%), low detection limits (0.005-0.013 µg/L) and high enrichment factors (528-1410). Relative recoveries were in the range of 72.2-122.6% with RSDs between 0.1% and 10.5% for real water samples. These results proved that the proposed method was a good choice for determination of organic pollutants in water samples.

Inside-tube solid-phase microextraction as an interlink between solid-phase microextraction and needle device for n-hexane evaluation in air and urine headspace.

Monitoring the trace amount of chemicals in various samples remains a challenge. This study was conducted to develop a new solid-phase microextraction (SPME) system (inside-tube SPME) for trace analysis of n-hexane in air and urine matrix. The inside-tube SPME system was prepared based on the phase separation technique. A mixture of carbon aerogel and polystyrene was loaded inside the needle using methanol as the anti-solvent. The air matrix of n-hexane was prepared in a Tedlar bag, and n-hexane vapor was sampled at a flow rate of 0.1 L/min. Urine samples spiked with n-hexane were used to simulate the sampling method. The limit of detection using the inside-tube SPME was 0.0003 µg/sample with 2.5 mg of adsorbent, whereas that using the packed needle was 0.004 µg/sample with 5 mg of carbon aerogel. For n-hexane analysis, the day-to-day and within-day coefficient variation were lower than 1.37%, with recoveries over 98.41% achieved. The inside-tube SPME is an inter-link device between two sample preparation methods, namely, a needle trap device and an SPME system. The result of this study suggested the use of the inside-tube SPME containing carbon aerogel (adsorbent) as a simple and fast method with low cost for n-hexane evaluation.

Bar Adsorptive Microextraction Coated with Carbon-based Phase Mixtures for Performance-Enhancement to Monitor Selected Benzotriazoles, Benzothiazoles, and Benzenesulfonamides in Environmental Water Matrices.

: In the present work we propose, for the first time, bar adsorptive microextraction coated with carbon-based phase mixtures, followed by microliquid desorption and high performance liquid chromatography-diode array detection (BAµE-µLD/HPLC-DAD) analysis, to enhance the performance of the determination of traces of benzotriazoles (BTRs), benzothiazoles (BTs), and benzenesulfonamide derivatives (BSDs) in environmental water matrices. Assessing six carbon-based sorbents (CA1, CN1, B test EUR, SX PLUS, SX 1, and R) with different selectivity properties allowed us to tailor the best phase mixture (R, 12.5%/CN1, 87.5%) that has convenient porosity, texture, and surface chemistry (pHPZC,mix ~6.5) for trace analysis of benzenesulfonamide, 1-hydroxybenzotriazole, 1H-benzotriazole, 5-methyl-1H-benzotriazole, benzothiazole, and 1,3-benzothiazol-2-ol chemicals in aqueous media. Optimized experimental conditions provided average recoveries ranging from 37.9% to 59.2%, appropriate linear dynamic ranges (5.0 to 120.0 µg L-1; r2 ≥ 0.9964), limits of detection between 1.0 and 1.4 µg L-1, and good precisions (relative standard deviation (RSD) ≤ 9.3%). The proposed methodology (BAµE(R, 12.5%/CN1, 87.5%)-µLD/HPLC-DAD) also proved to be a suitable sorption-based static microextraction alternative to monitor traces of BTRs, BTs, and BSDs in rain, waste, tap, and estuarine water samples. From the data obtained, the proposed approach showed that the BAµE technique with the addition of lab-made devices allows users to adapt the technique to use sorbents or mixtures of sorbents with the best selectivity characteristics whenever distinct classes of target analytes occur simultaneously in the same application.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview.

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.