High Resolution Analysis of Proteome Dynamics during Bacillus subtilis Sporulation.

Bacillus subtilis vegetative cells switch to sporulation upon nutrient limitation. To investigate the proteome dynamics during sporulation, high-resolution time-lapse proteomics was performed in a cell population that was induced to sporulate synchronously. Here, we are the first to comprehensively investigate the changeover of sporulation regulatory proteins, coat proteins, and other proteins involved in sporulation and spore biogenesis. Protein co-expression analysis revealed four co-expressed modules (termed blue, brown, green, and yellow). Modules brown and green are upregulated during sporulation and contain proteins associated with sporulation. Module blue is negatively correlated with modules brown and green, containing ribosomal and metabolic proteins. Finally, module yellow shows co-expression with the three other modules. Notably, several proteins not belonging to any of the known transcription regulons were identified as co-expressed with modules brown and green, and might also play roles during sporulation. Finally, levels of some coat proteins, for example morphogenetic coat proteins, decreased late in sporulation.

Optical design for laser tweezers Raman spectroscopy setups for increased sensitivity and flexible spatial detection.

We demonstrate a method to double the collection efficiency in laser tweezers Raman spectroscopy (LTRS) by collecting both the forward-scattered and backscattered light in a single-shot multitrack measurement. Our method can collect signals at different sample volumes, granting both the pinpoint spatial selectivity of confocal Raman spectroscopy and the bulk sensitivity of non-confocal Raman spectroscopy simultaneously. Further, we display that our approach allows for reduced detector integration time and laser power. To show this, we measure the Raman spectra of both polystyrene beads and bacterial spores. For spores, we can trap them at 2.5 mW laser power and acquire a high signal-to-noise ratio power spectrum of the calcium-dipicolinic acid peaks using an integration time of ${2} \times {30}\;{\rm s}$. Thus, our method will enable the monitoring of biological samples sensitive to high intensities for longer times. Additionally, we demonstrate that by a simple modification, we can add polarization sensitivity and retrieve extra biochemical information.

Visualization of fidaxomicin association with the exosporium layer of Clostridioides difficile spores.

BACKGROUND: Fidaxomicin has novel pharmacologic effects on C. difficile spore formation including outgrowth inhibition and persistent spore attachment. However, the mechanism of fidaxomicin attachment on spores has not undergone rigorous microscopic studies. MATERIALS & METHODS: Fidaxomicin attachment to C. difficile spores of three distinct ribotypes and C. difficile mutant spores with inactivation of exosporium or spore-coat protein-coding genes were visualized using confocal microscopy with a fidaxomicin-bodipy compound (green fluorescence). The pharmacologic effect of the fidaxomicin-bodipy compound was determined. Confocal microscopy experiments included direct effect on C. difficile wild-type and mutant spores, effect of exosporium removal, and direct attachment to a comparator spore forming organism, Bacillus subtilis. RESULTS: The fidaxomicin-bodipy compound MIC was 1 mg/L compared to 0.06 mg/L for unlabeled fidaxomicin, a 16-fold increase. Using confocal microscopy, the intracellular localization of fidaxomicin into vegetative C. difficile cells was observed consistent with its RNA polymerase mechanism of action and inhibited spore outgrowth. The fidaxomicin-bodipy compound was visualized outside of the core of C. difficile spores with no co-localization with the membrane staining dye FM4-64. Exosporium removal reduced fidaxomicin-bodipy association with C. difficile spores. Reduced fidaxomicin-bodipy was observed in C. difficile mutant spores for the spore surface proteins CdeC and CotE. CONCLUSION: This study visualized a direct attachment of fidaxomicin to C. difficile spores that was diminished with mutants of specific exosporium and spore coat proteins. These data provide advanced insight regarding the anti-spore properties of fidaxomicin.

Influence of core divisome proteins on cell division in Streptomyces venezuelae ATCC 10712.

The sporulating, filamentous soil bacterium Streptomyces venezuelae ATCC 10712 differentiates under submerged and surface growth conditions. In order to lay a solid foundation for the study of development-associated division for this organism, a congenic set of mutants was isolated, individually deleted for a gene encoding either a cytoplasmic (i.e. ftsZ) or core inner membrane (i.e. divIC, ftsL, ftsI, ftsQ, ftsW) component of the divisome. While ftsZ mutants are completely blocked for division, single mutants in the other core divisome genes resulted in partial, yet similar, blocks in sporulation septum formation. Double and triple mutants for core divisome membrane components displayed phenotypes that were similar to those of the single mutants, demonstrating that the phenotypes were not synergistic. Division in this organism is still partially functional without multiple core divisome proteins, suggesting that perhaps other unknown lineage-specific proteins perform redundant functions. In addition, by isolating an ftsZ2p mutant with an altered -10 region, the conserved developmentally controlled promoter was also shown to be required for sporulation-associated division. Finally, microscopic observation of FtsZ-YFP dynamics in the different mutant backgrounds led to the conclusion that the initial assembly of regular Z rings does not per se require the tested divisome membrane proteins, but the stability of Z rings is dependent on the divisome membrane components tested. The observation is consistent with the interpretation that Z ring instability likely results from and further contributes to the observed defects in sporulation septation in mutants lacking core divisome proteins.

Convenient Protocol for Production and Purification of Clostridioides difficile Spores for Germination Studies.

Clostridioides difficile, an obligate anaerobic bacterium, causes infections leading to prolonged diarrhea. The bacterium produces dormant spores that can withstand an aerobic environment, resulting in easy environmental transfer. Here, we present a convenient sporulation and purification protocol that can be practiced in any lab setting using a portable anaerobic glove bag. This protocol also optimizes existing cell growth methods and presents a detailed trouble shooting guide. This protocol is a modification of those previously reported by Edwards and McBride (2016) and Shen et al. (2016).

"Sporotan" a new fluorescent stain for identifying cryptic spores of Rhodobacter johrii.

We propose a new fluorescent stain "sporotan" and staining protocol which aid in the identification of cryptic endospores which are otherwise mistaken as poly-ß-hydroxyalkanoate granules.

A protein phosphorylation module patterns the Bacillus subtilis spore outer coat.

Assembly of the Bacillus subtilis spore coat involves over 80 proteins which self-organize into a basal layer, a lamellar inner coat, a striated electrodense outer coat and a more external crust. CotB is an abundant component of the outer coat. The C-terminal moiety of CotB, SKRB , formed by serine-rich repeats, is polyphosphorylated by the Ser/Thr kinase CotH. We show that another coat protein, CotG, with a central serine-repeat region, SKRG , interacts with the C-terminal moiety of CotB and promotes its phosphorylation by CotH in vivo and in a heterologous system. CotG itself is phosphorylated by CotH but phosphorylation is enhanced in the absence of CotB. Spores of a strain producing an inactive form of CotH, like those formed by a cotG deletion mutant, lack the pattern of electrondense outer coat striations, but retain the crust. In contrast, deletion of the SKRB region, has no major impact on outer coat structure. Thus, phosphorylation of CotG by CotH is a key factor establishing the structure of the outer coat. The presence of the cotB/cotH/cotG cluster in several species closely related to B. subtilis hints at the importance of this protein phosphorylation module in the morphogenesis of the spore surface layers.

Characterization of sporulation dynamics of Pseudoclostridium thermosuccinogenes using flow cytometry.

Single-cell analysis of microbial population heterogeneity is a fast growing research area in microbiology due to its potential to identify and quantify the impact of subpopulations on microbial performance in, for example, industrial biotechnology, environmental biology, and pathogenesis. Although several tools have been developed, determination of population heterogenity in anaerobic bacteria, especially spore-forming clostridia species has been amply studied. In this study we applied single cell analysis techniques such as flow cytometry (FCM) and fluorescence-assisted cell sorting (FACS) on the spore-forming succinate producer Pseudoclostridium thermosuccinogenes. By combining FCM and FACS with fluorescent staining, we differentiated and enriched all sporulation-related morphologies of P. thermosuccinogenes. To evaluate the presence of metabolically active vegetative cells, a blend of the dyes propidium iodide (PI) and carboxy fluorescein diacetate (cFDA) tested best. Side scatter (SSC-H) in combination with metabolic indicator cFDA dye provided the best separation of sporulation populations. Based on this protocol, we successfully determined culture heterogeneity of P. thermosuccinogenes by discriminating between mature spores, forespores, dark and bright phase endospores, and vegetative cells populations. Henceforth, this methodology can be applied to further study sporulation dynamics and its impact on fermentation performance and product formation by P. thermosuccinogenes.

Serratia nevei sp. nov. and Serratia bockelmannii sp. nov., isolated from fresh produce in Germany and reclassification of Serratia marcescens subsp. sakuensis Ajithkumar et al. 2003 as a later heterotypic synonym of Serratia marcescens subsp. marcescens.

Fifteen enterobacterial strains were isolated from fresh produce. The 16S rRNA gene sequences indicated that these belong to Serratia, with twelve strains showing 99.57%-99.93% and three strains showing 99.86-100% 16S rRNA gene sequence similarity with Serratia marcescens and Serratia nematodiphila as nearest neighbors, respectively. Further comparative multi locus sequence analyses, as well as phylogenomic comparisons, revealed that 6 of the 15 strains were well-separated from their nearest neighbors and formed two clearly distinct taxa. Strains S2, S9, S10 and S15T were urease-positive, while strains S3T and S13 were urease-negative. Average nucleotide identity and digital DNA-DNA hybridization comparisons of representative strains S3T and S15T with type strains of S. marcescens, S. nematodiphila and S. ureilytica indicated that these shared less than 96% and 70% homology, respectively. Major fatty acids of strains S3T and S15T included C16:0, C16:1 ω7c/C16:1 ω6c, C17:0 Cyclo and C18:1 ω6c /C18:1 ω7c. The mol% G+C of genomic DNA of strain S15T was 59.49% and of strain S3T was 59.04. These results support the description of two novel species, Serratia nevei and Serratia bockelmannii, with strains S15T (=LMG 31536T =DSM 110085T) and S3T (=LMG 31535T =DSM 110152T) as type strains, respectively. Although Serratia marcescens subsp. sakuensis was previously described to form spores, spores could not be determined in this study. As spore formation was the only differential characteristic of this subspecies, S. marcescens subsp. sakuensis is a later heterotypic synonym of Serratia marcescens.

Surface morphology differences in Clostridium difficile spores, based on different strains and methods of purification.

Infections linked to Clostridium difficile are a significant cause of suffering. In hospitals, the organism is primarily acquired through the faecal-oral route as spores excreted by infected patients contaminate the healthcare environment. We previously reported that members of the C. difficile group varied widely in their ability to adhere to stainless steel and proposed that these differences were a consequence of variations in spore architecture. In this study of clinical isolates and spore coat protein mutants of C. difficile we identified three distinct spore surfaces morphotypes; smooth, bag-like and "pineapple-like" using scanning electron microscopy (SEM). The frequency of each morphotype in a spore population derived from a single isolate varied depending on the host strain and the method used to produce and purify the spores. Our results suggest that the inclusion of a sonication step in the purification process had a marked effect on spore structure. In an attempt to link differences in spore appearance with key structural spore proteins we compared the morphology of spores of CD630 to those produced by CD630 variants lacking either CotE or BclA. While SEM images revealed no obvious structural differences between CD630 and its mutants we did observe significant differences (p < 0.001) in relative hydrophobicity suggesting that modifications had occurred but not at a level to be detectable by SEM. In conclusion, we observed significant variation in the spore morphology of clinical isolates of C. difficile due in part to the methods used to produce them. Sonication in particular can markedly change spore appearance and properties. The results of this study highlight the importance of adopting "standard" methods when attempting to compare results between studies and to understand the significance of their differences.

The Bacillus cereus Group: Bacillus Species with Pathogenic Potential.

The Bacillus cereus group includes several Bacillus species with closely related phylogeny. The most well-studied members of the group, B. anthracis, B. cereus, and B. thuringiensis, are known for their pathogenic potential. Here, we present the historical rationale for speciation and discuss shared and unique features of these bacteria. Aspects of cell morphology and physiology, and genome sequence similarity and gene synteny support close evolutionary relationships for these three species. For many strains, distinct differences in virulence factor synthesis provide facile means for species assignment. B. anthracis is the causative agent of anthrax. Some B. cereus strains are commonly recognized as food poisoning agents, but strains can also cause localized wound and eye infections as well as systemic disease. Certain B. thuringiensis strains are entomopathogens and have been commercialized for use as biopesticides, while some strains have been reported to cause infection in immunocompromised individuals. In this article we compare and contrast B. anthracis, B. cereus, and B. thuringiensis, including ecology, cell structure and development, virulence attributes, gene regulation and genetic exchange systems, and experimental models of disease.

Microencapsulation of an indigenous isolate of Bacillus thuringiensis by spray drying.

In this study, microencapsulation by spray drying was performed to protect spores and crystals of an indigenous isolate of Bacillus thuringiensis Se13 from environmental stress. The effects of wall material, inlet temperature, and outlet temperature on microencapsulation of Bt-Se13 were investigated using Taguchi's orthogonal array. The most suitable wall material determined as maltodextrin DE10. The optimum inlet and outlet temperatures of spray drier were determined as 160 °C and 70 °C, respectively. The number of viable spores, mean particle size, wetting time, percentage of suspensibility and moisture content of the product produced under optimum conditions were determined as 8.1 × 1011 cfu g-1, 13.462 µm, 25.22 s, 77.66% and 7.29%, respectively. As a result of efficiency studies on Spodoptera exigua in the laboratory conditions, the LC50 was determined as 1.6 × 104 cfu mL-1. Microencapsulated Bt-Se13 based bio-pesticide may be registered for the control of S. exigua and can be tested against other lepidopterans which share the same environment.

Asymmetric cell division during Bacillus subtilis sporulation.

Bacillus subtilis is a rod-shaped bacterium which divides precisely at mid-cell during vegetative growth. Unlike Escherichia coli, another model organism used for studying cell division, B. subtilis can also divide asymmetrically during sporulation, the simplest cell differentiation process. The asymmetrically positioned sporulation septum serves as a morphological foundation for establishing differential gene expression in the smaller forespore and larger mother cell. Both vegetative and sporulation septation events are fine-tuned with cell cycle, and placement of both septa are highly precise. We understand in some detail how this is achieved during vegetative growth but have limited information about how the asymmetric septation site is determined during sporulation.

Proteomics and microscopy tools for the study of antimicrobial resistance and germination mechanisms of bacterial spores.

Bacterial spores are ubiquitous in nature and can withstand both chemical and physical stresses. Spores can survive food preservation processes and upon outgrowth cause food spoilage as well as safety risks. The heterogeneous germination and outgrowth behavior of isogenic spore populations exacerbates this risk. A major unknown factor of spores is likely to be the inherently heterogeneous spore protein composition. The proteomics methods discussed here help in broadening the knowledge about spore structure and identification of putative target proteins from spores of different spore formers. Approaches to synchronize Bacillus subtilis spore formation, and to analyze spore proteins as well as the physiology of spore germination and outgrowth are also discussed. Live-imaging and fluorescence microscopy techniques discussed here allow analysis, at single cell level, of the 'germinosome', the process of spore germination itself, spore outgrowth and the spore intracellular pH dynamics. For the latter, a recently published improved pHluorin (IpHluorin) under control of the ptsG promoter is applicable. While the data obtained from such tools offers novel insight in the mechanisms of bacterial spore awakening, it may also be used to probe candidate antimicrobial compounds for inhibitory effects on spore germination and strengthen microbial risk assessment.

Synergistic inactivation and mechanism of thermal and ultrasound treatments against Bacillus subtilis spores.

Some Bacillus species are causative agents of food spoilage and a wide array of diseases. Due to their ability to form highly heat-resistant spores, it is of great interest to develop more effective inactivation strategies whereby these spores could be inactivated. Therefore, this work assessed inactivation of thermal and ultrasound treatments against Bacillus subtilis spores. The study further investigated the thermosonication (thermal and ultrasound, TS) -induced inactivation to the spores through a combination of morphology observation and internal factor analyses. The results of TS indicated that the TS combination synergistically inactivated spores by the maximum log reduction of 2.43 ±â€¯0.08 at 80 °C and 20 W/ml and caused severe cell damage. The visual images revealed that the destructive mode of action of TS had multitarget sites, including coat, cortex, and inner membrane. Three distinct sub-populations were detected by Flow cytometry (FCM), and an unknown step with some physical compromise of the spore's inner membrane and partially hydrolyzed cortex involving the three steps model of inactivation was suggested. The combination of DPA (pyridine-2,6 dicarboxylic acid) content and the relative viabilities of the fractions suggested that during the TS treatment DPA release took place largely after spore death. The dead spores that retained DPA germinated relatively normally, but outgrow poorly, indicating that some key enzymes of intermediary metabolism has been damaged by TS treatment. Such understanding of the lethal action of TS may lead to the development of novel strategies involving spore destruction.

Effects of elevated carbon dioxide on environmental microbes and its mechanisms: A review.

Before the industrial revolution, the atmospheric CO2 concentration was 180-330 ppm; however, fossil-fuel combustion and forest destruction have led to increased atmospheric CO2 concentration. CO2 capture and storage is regarded as a promising strategy to prevent global warming and ocean acidification and to alleviate elevated atmospheric CO2 concentration, but the leakage of CO2 from storage system can lead to rapid acidification of the surrounding circumstance, which might cause negative influence on environmental microbes. The effects of elevated CO2 on microbes have been reported extensively, but the review regarding CO2 affecting different environmental microorganisms has never been done previously. Also, the mechanisms of CO2 affecting environmental microorganisms are usually contributed to the change of pH values, while the direct influences of CO2 on microorganisms were often neglected. This paper aimed to provide a systematic review of elevated CO2 affecting environmental microbes and its mechanisms. Firstly, the influences of elevated CO2 and potential leakage of CO2 from storage sites on community structures and diversity of different surrounding environmental microbes were assessed and compared. Secondly, the adverse impacts of CO2 on microbial growth, cell morphology and membranes, bacterial spores, and microbial metabolism were introduced. Then, based on biochemical principles and knowledge of microbiology and molecular biology, the fundamental mechanisms of the influences of carbon dioxide on environmental microbes were discussed from the aspects of enzyme activity, electron generation and transfer, and key gene and protein expressions. Finally, key questions relevant to the environmental effect of CO2 that need to be answered in the future were addressed.

Actinomycetospora callitridis sp. nov., an endophytic actinobacterium isolated from the surface-sterilised root of an Australian native pine tree.

An endophytic actinobacterium, strain CAP 335T, was isolated from a root sample of a native pine tree growing on the Bedford Park campus of Flinders University, Adelaide, South Australia. The result of a polyphasic study showed that this strain was identified as a new member of the genus Actinomycetospora. This strain was observed to be a Gram stain-positive, aerobic actinobacterium with well-developed substrate mycelia and to form short chains of spores. Actinomycetospora chibensis TT04-21T and Actinomycetospora straminea IY07-55T were found to be close phylogenetic neighbours, each sharing 99.1% 16S rRNA gene similarity. Chemotaxonomic data including major fatty acids, cell wall components and major menaquinones confirmed the affiliation of strain CAP 335T to the genus Actinomycetospora. The phylogenetic analysis, physiological and biochemical studies and DNA-DNA hybridization, allowed the genotypic and phenotypic differentiation of strain CAP 335T and the closely related species with valid names. The name proposed for the new species is Actinomycetospora callitridis sp. nov. The type strain is CAP 335T (= DSM 101857T = NRRL B-65350T).

Ultrastructural analysis of spores from diverse Bacillales species isolated from Brazilian soil.

Many species in the order Bacillales form a specialized cell type called a spore that is resistant to a range of environmental stresses. Transmission electron microscopy (TEM) reveals that the spore is comprised of a series of concentric shells, surrounding an interior compartment harbouring the spore DNA. The outermost of these shells varies considerably in morphology among species, likely reflecting adaptations to the highly diverse niches in which spores are found. To better characterize the variation in spore ultrastructure among diverse species, we used TEM to analyse spores from a collection of 23 aerobic spore-forming bacteria from the Solo do Distrito Federal (SDF strains), spanning the genera Bacillus, Lysinibacillus, Paenibacillus and Brevibacillus, isolated from soil from central Brazil. We found that the structures of these spores varied widely, as expected. Interestingly, even though these isolates are novel strains of each species, they were structurally very similar to the known examples of each species in the literature. Because in most cases, the species we analysed are poorly characterized, our data provide important evidence regarding which structural features are likely to be constant within a taxon and which are likely to vary.

Efficient removal of spores from skim milk using cold microfiltration: Spore size and surface property considerations.

Bacterial spores present in milk can cause quality and shelf-life issues for dairy products. The objectives of this study were to evaluate the effectiveness of microfiltration (MF) in removing Bacillus licheniformis and Geobacillus sp. spores from skim milk using membranes with pore sizes of 1.4 and 1.2 µm, and to investigate the role of spore surface properties in MF removal. Cell sizes were determined by scanning electron microscopy, surface charge by zeta potential analysis, and surface hydrophobicity by contact angle measurements. Commercially pasteurized skim milk was inoculated with a spore suspension at about 106 cfu/mL, and then processed by MF using ceramic membranes at 6°C, a cross-flow velocity of 4.1 m/s, and transmembrane pressure of 69 to 74 kPa. Total aerobic plate and spore counts in the milk were determined before and after MF. All processing runs and surface and product analyses were conducted in triplicate, and data were analyzed statistically. For the same strain, spores were shorter and wider than vegetative cells, averaging 1.37 to 1.59 µm in length and 0.64 to 0.81 µm in width. Reduction of B. licheniformis spores significantly increased with a reduction in MF pore size, from 2.17 log for 1.4-µm pore size, to 4.57 log for 1.2-µm pore size. Both pore sizes resulted in almost complete removal of Geobacillus sp. spores. All spores and the ceramic membrane had a negative surface charge at milk pH, indicating an electrostatic repulsion between them. Bacillus licheniformis spores were hydrophilic, whereas Geobacillus sp. spores were hydrophobic. Consequently, Geobacillus sp. spores had a tendency to cluster in skim milk, preventing their passage even through the 1.4-µm MF membrane, whereas some B. licheniformis spores could still pass through a 1.2-µm membrane. This study demonstrates that efficient removal of spores from skim milk by cold MF may require a smaller membrane pore size than required for removal of vegetative cells of the same species, and that cell surface properties may interfere with the outcome of filtration as would be anticipated based on size alone.

Engineering Rugged Field Assays to Detect Hazardous Chemicals Using Spore-Based Bacterial Biosensors.

Bacterial whole cell-based biosensors have been genetically engineered to achieve selective and reliable detection of a wide range of hazardous chemicals. Although whole-cell biosensors demonstrate many advantages for field-based detection of target analytes, there are still some challenges that need to be addressed. Most notably, their often modest shelf life and need for special handling and storage make them challenging to use in situations where access to reagents, instrumentation, and expertise are limited. These problems can be circumvented by developing biosensors in Bacillus spores, which can be engineered to address all of these concerns. In its sporulated state, a whole cell-based biosensor has a remarkably long life span and is exceptionally resistant to environmental insult. When these spores are germinated for use in analytical techniques, they show no loss in performance, even after long periods of storage under harsh conditions. In this chapter, we will discuss the development and use of whole cell-based sensors, their adaptation to spore-based biosensors, their current applications, and future directions in the field.