Cyanobacterial Biocrust on Biomineralized Soil Mitigates Freeze-Thaw Effects and Preserves Structure and Ecological Functions.

Biocrust inoculation and microbially induced carbonate precipitation (MICP) are tools used in restoring degraded arid lands. It remains unclear whether the ecological functions of the two tools persist when these methods are combined and subjected to freeze-thaw (FT) cycles. We hypothesized a synergetic interaction between MICP treatment and biocrust under FT cycles, which would allow both components to retain their ecological functions. We grew cyanobacterial (Nostoc commune) biocrusts on bare soil and on MICP (Sporosarcina pasteurii)-treated soil, subjecting them to repeated FT cycles simulating the Mongolian climate. Generalized linear modeling revealed that FT cycling did not affect physical structure or related functions but could increase the productivity and reduce the nutrient condition of the crust. The results confirm the high tolerance of MICP-treated soil and biocrust to FT cycling. MICP treatment + biocrust maintained higher total carbohydrate content under FT stress. Our study indicates that biocrust on biomineralized soil has a robust enough structure to endure FT cycling during spring and autumn and to promote restoration of degraded lands.

Effect of (in)organic additives on microbially induced calcium carbonate precipitation.

AIM: This study aimed to understand the morphological effects of (in)organic additives on microbially induced calcium carbonate precipitation (MICP). METHODS AND RESULTS: MICP was monitored in real time in the presence of (in)organic additives: bovine serum albumin (BSA), biofilm surface layer protein A (BslA), magnesium chloride (MgCl2), and poly-l-lysine. This monitoring was carried out using confocal microscopy to observe the formation of CaCO3 from the point of nucleation, in comparison to conditions without additives. Complementary methodologies, namely scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction, were employed to assess the visual morphology, elemental composition, and crystalline structures of CaCO3, respectively, following the crystals' formation. The results demonstrated that in the presence of additives, more CaCO3 crystals were produced at 100 min compared to the reaction without additives. The inclusion of BslA resulted in larger crystals than reactions containing other additives, including MgCl2. BSA induced a significant number of crystals from the early stages of the reaction (20 min) but did not have a substantial impact on crystal size compared to conditions without additives. All additives led to a higher content of calcite compared to vaterite after a 24-h reaction, with the exception of MgCl2, which produced a substantial quantity of magnesium calcite. CONCLUSIONS: The work demonstrates the effect of several (in)organic additives on MICP and sets the stage for further research to understand additive effects on MICP to achieve controlled CaCO3 precipitation.

Microbially Induced Calcium Carbonate Precipitation by Sporosarcina pasteurii: a Case Study in Optimizing Biological CaCO3 Precipitation.

Current production of traditional concrete requires enormous energy investment that accounts for approximately 5 to 8% of the world's annual CO2 production. Biocement is a building material that is already in industrial use and has the potential to rival traditional concrete as a more convenient and more environmentally friendly alternative. Biocement relies on biological structures (enzymes, cells, and/or cellular superstructures) to mineralize and bind particles in aggregate materials (e.g., sand and soil particles). Sporosarcina pasteurii is a workhorse organism for biocementation, but most research to date has focused on S. pasteurii as a building material rather than a biological system. In this review, we synthesize available materials science, microbiology, biochemistry, and cell biology evidence regarding biological CaCO3 precipitation and the role of microbes in microbially induced calcium carbonate precipitation (MICP) with a focus on S. pasteurii. Based on the available information, we provide a model that describes the molecular and cellular processes involved in converting feedstock material (urea and Ca2+) into cement. The model provides a foundational framework that we use to highlight particular targets for researchers as they proceed into optimizing the biology of MICP for biocement production.

Microbiologically induced calcite precipitation for in situ stabilization of heavy metals contributes to land application of sewage sludge.

Microbiologically induced calcite precipitation (MICP) has shed new light on solving the problem of in situ stabilization of heavy metals (HMs) in sewage sludge before land disposal. In this study, we examined whether MICP treatment can be integrated into a sewage sludge anaerobic digestion-land application process. Our results showed that MICP treatment not only prevented the transfer of ionic-state Cd from the sludge to the supernatant (98.46 % immobilization efficiency) but also reduced the soluble exchangeable Pb and Cd fractions by up to 100 % and 48.54 % and increased the residual fractions by 22.54 % and 81.77 %, respectively. In addition, the analysis of the stability of HMs in MICP-treated sludge revealed maximum reductions of 100 % and 89.56 % for TCLP-extractable Pb and Cd, respectively. Three-dimensional fluorescence, scanning electron microscopy-energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy analyses confirmed the excellent performance of the ureolytic bacteria Sporosarcina ureilytica ML-2 in the sludge system. High-throughput sequencing showed that the relative abundance of Sporosarcina sp. reached 53.18 % in MICP-treated sludge, and the urease metabolism functional genes unit increased by a maximum of 239.3 %. The MICP technology may be a feasible method for permanently stabilizing HMs in sewage sludge before land disposal.

Influence of native ureolytic microbial community on biocementation potential of Sporosarcina pasteurii.

Microbially induced calcium carbonate precipitation (MICP)/Biocementation has emerged as a promising technique for soil engineering applications. There are chiefly two methods by which MICP is applied for field applications including biostimulation and bioaugmentation. Although bioaugmentation strategy using efficient ureolytic biocementing culture of Sporosarcina pasteurii is widely practiced, the impact of native ureolytic microbial communities (NUMC) on CaCO3 mineralisation via S. pasteurii has not been explored. In this paper, we investigated the effect of different concentrations of NUMC on MICP kinetics and biomineral properties in the presence and absence of S. pasteurii. Kinetic analysis showed that the biocementation potential of S. pasteurii is sixfold higher than NUMC and is not significantly impacted even when the concentration of the NUMC is eight times higher. Micrographic results revealed a quick rate of CaCO3 precipitation by S. pasteurii leading to generation of smaller CaCO3 crystals (5-40 µm), while slow rate of CaCO3 precipitation by NUMC led to creation of larger CaCO3 crystals (35-100 µm). Mineralogical results showed the predominance of calcite phase in both sets. The outcome of current study is crucial for tailor-made applications of MICP.

Role of Na-Montmorillonite on Microbially Induced Calcium Carbonate Precipitation.

The use of additives has generated significant attention due to their extensive application in the microbially induced calcium carbonate precipitation (MICP) process. This study aims to discuss the effects of Na-montmorillonite (Na-MMT) on CaCO3 crystallization and sandy soil consolidation through the MICP process. Compared with the traditional MICP method, a larger amount of CaCO3 precipitate was obtained. Moreover, the reaction of Ca2+ ions was accelerated, and bacteria were absorbed by a small amount of Na-MMT. Meanwhile, an increase in the total cementing solution (TCS) was not conducive to the previous reaction. This problem was solved by conducting the reaction with Na-MMT. The polymorphs and morphologies of the CaCO3 precipitates were tested by using X-ray diffraction and scanning electron microscopy. Further, when Na-MMT was used, the morphology of CaCO3 changed from an individual precipitate to agglomerations of the precipitate. Compared to the experiments without Na-MMT in the MICP process, the addition of Na-MMT significantly reduced the hydraulic conductivity (HC) of sandy soil consolidated.

Improvement of Biomineralization of Sporosarcina pasteurii as Biocementing Material for Concrete Repair by Atmospheric and Room Temperature Plasma Mutagenesis and Response Surface Methodology.

Microbially induced calcium carbonate precipitation (MICP) has recently become an intelligent and environmentally friendly method for repairing cracks in concrete. To improve on this ability of microbial materials concrete repair, we applied random mutagenesis and optimization of mineralization conditions to improve the quantity and crystal form of microbially precipitated calcium carbonate. Sporosarcina pasteurii ATCC 11859 was used as the starting strain to obtain the mutant with high urease activity by atmospheric and room temperature plasma (ARTP) mutagenesis. Next, we investigated the optimal biomineralization conditions and precipitation crystal form using Plackett-Burman experimental design and response surface methodology (RSM). Biomineralization with 0.73 mol/l calcium chloride, 45 g/l urea, reaction temperature of 45°C, and reaction time of 22 h, significantly increased the amount of precipitated calcium carbonate, which was deposited in the form of calcite crystals. Finally, the repair of concrete using the optimized biomineralization process was evaluated. A comparison of water absorption and adhesion of concrete specimens before and after repairs showed that concrete cracks and surface defects could be efficiently repaired. This study provides a new method to engineer biocementing material for concrete repair.

Contribution of bacterial cells as nucleation centers in microbiologically induced CaCO3 precipitation-A mathematical modeling approach.

The microbiologically induced calcite precipitation (MICP) has been extensively studied for geotechnical engineering through simultaneous action of natural phenomena and engineering processes. The focus of bacterial contribution to the MICP has been directed to calcium carbonate productivity, while the additional bacterial role as a crystal nucleation center was not explained especially from a mathematical prediction modeling point of view. Therefore, this study provides explanations and a mathematical modeling approach of bacterial influence on the MICP induced by newly-isolated ureolytic Bacillus strains and Sporosarcina pasteurii DSM 33. Using the obtained results of low-cost, rapid, and simple assays, artificial neural network modeling was applied for cell surface predispositions, pH changes as well as calcium-involved function in biofilm formation during the MICP, for the first time. Based on the obtained contribution of the alkalophilic/alkaloresistant bacteria, calcite precipitation can be significantly directed by the presence, of ureolytic bacterial cells as nucleation centers during CaCO3 precipitation as well as their morphology, surface characteristics, potential to form a biofilm, and/or generate pH changes.

Transcriptome analyses reveal the utilization of nitrogen sources and related metabolic mechanisms of Sporosarcina pasteurii.

In recent years, Sporosarcina pasteurii (S. pasteurii) has become one of the most popular bacteria in microbially induced calcium carbonate precipitation (MICP). Various applications have been developed based on the efficient urease that can induce the precipitation of calcium carbonate. However, the metabolic mechanism related to biomineralization of S. pasteurii has not been clearly elucidated. The process of bacterial culture and biomineralization consumes a large amount of urea or ammonium salts, which are usually used as agricultural fertilizers, not to mention probable environmental pollutions caused by the excessive use of these raw materials. Therefore, it is urgent to reveal the mechanism of nitrogen utilization and metabolism of S. pasteurii. In this paper, we compared the growth and gene expression of S. pasteurii under three different culture conditions through transcriptome analyses. GO and KEGG analyses revealed that both ammonium and urea were direct nitrogen sources of S. pasteurii, and the bacteria could not grow normally in the absence of ammonium or urea. To the best of our knowledge, this paper is the first one to reveal the nitrogen utilization mechanism of S. pasteurii through transcriptome methods. Furthermore, the presence of ammonium might promote the synthesis of intracellular ATP and enhance the motility of the bacteria. There should be an ATP synthesis mechanism associated with urea hydrolysis catalyzed by urease in S. pasteurii.

Calcite seed-assisted microbial induced carbonate precipitation (MICP).

Microbial-induced calcium carbonate precipitation (MICP) is a biological process inducing biomineralization of CaCO3. This can be used to form a solid, concrete-like material. To be able to use MICP successfully to produce solid materials, it is important to understand the formation process of the material in detail. It is well known that crystallization surfaces can influence the precipitation process. Therefore, we present in this contribution a systematic study investigating the influence of calcite seeds on the MICP process. We focus on the changes in the pH and changes of the optical density (OD) signal measured with absorption spectroscopy to analyze the precipitation process. Furthermore, optical microscopy was used to visualize the precipitation processes in the sample and connect them to changes in the pH and OD. We show, that there is a significant difference in the pH evolution between samples with and without calcite seeds present and that the shape of the pH evolution and the changes in OD can give detailed information about the mineral precipitation and transformations. In the presented experiments we show, that amorphous calcium carbonate (ACC) can also precipitate in the presence of initial calcite seeds and this can have implications for consolidated MICP materials.

Non-sterile corn steep liquor a novel, cost effective and powerful culture media for Sporosarcina pasteurii cultivation for sand improvement.

AIMS: Microbial induced calcium carbonate precipitation (MICP) is one of the bio-cementation methods for improving granular soils. This study evaluate the feasibility of obtaining a bacterial solution with high optical density and urease activity by an inexpensive corn steep liquor (CSL) medium in non-sterile conditions in order to achieve sand improvement. METHODS AND RESULTS: Corn steep liquor media with different concentrations (different dilution rates) were prepared and, without any autoclaving (non-sterile conditions), different percentage of the inoculum solutions were added to them and incubated. Effect of inoculum solution percentage and CSL dilution rates on specifications of bacterial solution was evaluated. Urease activity and scanning electron microscope (SEM) and X-Ray Diffraction (XRD) were used to efficiency of CLS media in sand improvement. The considerable urease activity was measured as 5·7 mS cm-1  min-1 using nonsterile CLS. By using CYNU (CSL-Yeast extract-NH4Cl-Urea) bacterial solution, the urease activity of 5·5 mS cm-1  min-1 for the OD600 (optical density at 600 nm) of 1·88 and, consequently, specific urease activity of 2·93 mS cm-1  min-1  OD600 -1 was obtained. The highest unconfined compressive strength (811 kPa) was obtained for the CYNU. XRD revealed new calcite peaks next to the quartz peaks. CONCLUSIONS: Production of inexpensive bacterial solution using diluted CSL as the inexpensive, effective and powerful culture media for Sporosarcina pasteurii cultivation in nonsterile conditions, allows geotechnical and biotechnological engineers to use MICP technology more widely in land improvement and field-scale bio-cementation and bioremediation projects. SIGNIFICANCE AND IMPACT OF THE STUDY: Obtaining high urease activity of inexpensive microbial solution using diluted CSL as the culture medium in nonsterile conditions, as the unique results of this study, can be significant in the field of bioremediation studies using MICP.

Beneficial factors for biomineralization by ureolytic bacterium Sporosarcina pasteurii.

BACKGROUND: The ureolytic bacterium Sporosarcina pasteurii is well-known for its capability of microbially induced calcite precipitation (MICP), representing a great potential in constructional engineering and material applications. However, the molecular mechanism for its biomineralization remains unresolved, as few studies were carried out. RESULTS: The addition of urea into the culture medium provided an alkaline environment that is suitable for S. pasteurii. As compared to S. pasteurii cultivated without urea, S. pasteurii grown with urea showed faster growth and urease production, better shape, more negative surface charge and higher biomineralization ability. To survive the unfavorable growth environment due to the absence of urea, S. pasteurii up-regulated the expression of genes involved in urease production, ATPase synthesis and flagella, possibly occupying resources that can be deployed for MICP. As compared to non-mineralizing bacteria, S. pasteurii exhibited more negative cell surface charge for binding calcium ions and more robust cell structure as nucleation sites. During MICP process, the genes for ATPase synthesis in S. pasteurii was up-regulated while genes for urease production were unchanged. Interestingly, genes involved in flagella were down-regulated during MICP, which might lead to poor mobility of S. pasteurii. Meanwhile, genes in fatty acid degradation pathway were inhibited to maintain the intact cell structure found in calcite precipitation. Both weak mobility and intact cell structure are advantageous for S. pasteurii to serve as nucleation sites during MICP. CONCLUSIONS: Four factors are demonstrated to benefit the super performance of S. pasteurii in MICP. First, the good correlation of biomass growth and urease production of S. pasteurii provides sufficient biomass and urease simultaneously for improved biomineralization. Second, the highly negative cell surface charge of S. pasteurii is good for binding calcium ions. Third, the robust cell structure and fourth, the weak mobility, are key for S. pasteurii to be nucleation sites during MICP.

Study of As-resistant bacteria from Nadia, India and a survey of two As resistance-related proteins.

The present investigation deals with the characterisation of three As-resistant bacteria, Bacillus aryabhattai strain VPS1, Bacillus licheniformis strain VPS6 and Sporosarcina thermotolerans strain VPS7 isolated from the rhizosphere of a contaminated paddy field in Chakdaha, Nadia, West Bengal, India. Two strains, VPS6 and VPS7 showed ureolytic activity, which can be used for microbial-induced calcite precipitation of As as a bioremediation option. However, As reduction and oxidation capacities were not reported in any of these bacteria. A phylogenetic tree of 16S ribosomal RNA gene sequences was constructed for all three bacterial isolates, including different species of As-resistant Bacillus and Sporosarcina. Furthermore, literature survey and genome mining were employed to explore the diversity of As resistance-related proteins, arsenite S-adenosylmethyltransferase (ArsM) and arsenical pump membrane protein (ArsB) among different bacteria, and the phylogenetic relatedness was studied to understand the distribution and evolution of their amino acid sequences. ArsB was predominantly present in a wide variety of bacteria (347 taxa); however, ArsM was reported in comparatively fewer isolates (109 taxa). There were a total of 60 similar taxa that contained both ArsM and ArsB. Both proteins were most abundantly present in phylum Proteobacteria. Overall, this investigation enumerates As-resistant bacteria to understand the As metabolism in the environment, and the phylogenetic analysis of As resistance-related proteins helps in understanding the functional relationship in different bacteria for their role in As mobility in the environment.

Engineered Ureolytic Microorganisms Can Tailor the Morphology and Nanomechanical Properties of Microbial-Precipitated Calcium Carbonate.

We demonstrate for the first time that the morphology and nanomechanical properties of calcium carbonate (CaCO3) can be tailored by modulating the precipitation kinetics of ureolytic microorganisms through genetic engineering. Many engineering applications employ microorganisms to produce CaCO3. However, control over bacterial calcite morphology and material properties has not been demonstrated. We hypothesized that microorganisms genetically engineered for low urease activity would achieve larger calcite crystals with higher moduli. We compared precipitation kinetics, morphology, and nanomechanical properties for biogenic CaCO3 produced by two Escherichia coli (E. coli) strains that were engineered to display either high or low urease activity and the native producer Sporosarcina pasteurii. While all three microorganisms produced calcite, lower urease activity was associated with both slower initial calcium depletion rate and increased average calcite crystal size. Both calcite crystal size and nanoindentation moduli were also significantly higher for the low-urease activity E. coli compared with the high-urease activity E. coli. The relative resistance to inelastic deformation, measured via the ratio of nanoindentation hardness to modulus, was similar across microorganisms. These findings may enable design of novel advanced engineering materials where modulus is tailored to the application while resistance to irreversible deformation is not compromised.

Biostimulation of calcite precipitation process by bacterial community in improving cement stabilized rammed earth as sustainable material.

Rammed earth has been enjoying a renaissance as sustainable construction material with cement stabilized rammed earth (CSRE). At the same time, it is important to convert CSRE to be a stronger, durable, and environment-friendly building material. Bacterial application is established to improve cementitious materials; however, bioaugmentation is not widely acceptable by engineering communities. Hence, the present study is an attempt applying biostimulation approach to develop CSRE as sustainable construction material. Results showed that biostimulation improved the compressive strength of CSRE by 29.6% and resulted in 27.7% lower water absorption compared to control. The process leading to biocementation in improving CSRE was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscope-energy dispersive spectrometer. Further, Illumina MiSeq sequencing was used to investigate changes in bacterial community structures after biostimulation that identified majority of ureolytic bacteria dominated by phylum Firmicutes and genus Sporosarcina playing role in biocementation. The results open a way applying biological principle that will be acceptable to a wide range of civil engineers.

Facultative and anaerobic consortia of haloalkaliphilic ureolytic micro-organisms capable of precipitating calcium carbonate.

AIMS: Development of biomineralization technologies has largely focused on microbially induced carbonate precipitation (MICP) via Sporosarcina pasteurii ureolysis; however, as an obligate aerobe, the general utility of this organism is limited. Here, facultative and anaerobic haloalkaliphiles capable of ureolysis were enriched, identified and then compared to S. pasteurii regarding biomineralization activities. METHODS AND RESULTS: Anaerobic and facultative enrichments for haloalkaliphilic and ureolytic micro-organisms were established from sediment slurries collected at Soap Lake (WA). Optimal pH, temperature and salinity were determined for highly ureolytic enrichments, with dominant populations identified via a combination of high-throughput SSU rRNA gene sequencing, clone libraries and Sanger sequencing of isolates. The enrichment cultures consisted primarily of Sporosarcina- and Clostridium-like organisms. Ureolysis rates and direct cell counts in the enrichment cultures were comparable to the S. pasteurii (strain ATCC 11859) type strain. CONCLUSIONS: Ureolysis rates from both facultatively and anaerobically enriched haloalkaliphiles were either not statistically significantly different to, or statistically significantly higher than, the S. pasteurii (strain ATCC 11859) rates. Work here concludes that extreme environments can harbour highly ureolytic active bacteria with potential advantages for large scale applications, such as environments devoid of oxygen. SIGNIFICANCE AND IMPACT OF THE STUDY: The bacterial consortia and isolates obtained add to the possible suite of organisms available for MICP implementation, therefore potentially improving the economics and efficiency of commercial biomineralization.

Influence of temperature on microbially induced calcium carbonate precipitation for soil treatment.

Microbially induced calcium carbonate precipitation (MICP) is a potential method for improvement of soil. A laboratory study was conducted to investigate the influence of temperatures for soil improvement by MICP. The ureolytic activity experiments, MICP experiments in aqueous solution and sand column using Sporosarcina pasteurii were conducted at different temperatures(10, 15, 20, 25 and 30°C). The results showed there were microbially induced CaCO3 precipitation at all the temperatures from 10 to 30°C. The results of ureolytic activity experiments showed that the bacterial had higher ureolytic activity at high temperatures within the early 20 hours, however, the ureolytic activity at higher temperatures decreased more quickly than at lower temperatures. The results of MICP experiments in aqueous solution and sand column were consistent with tests of ureolytic activity. Within 20 to 50 hours of the start of the test, more CaCO3 precipitation was precipitated at higher temperature, subsequently, the precipitation rate of all experiments decreased, and the higher the temperature, the faster the precipitation rate dropped. The final precipitation amount of CaCO3 in aqueous solution and sand column tests at 10 °C was 92% and 37% higher than that at 30 °C. The maximum unconfined compressive strength of MICP treated sand column at 10 °C was 135% higher than that at 30 °C. The final treatment effect of MICP at lower temperature was better than that at high temperature within the temperature range studied. The reason for better treatment effect at lower temperatures was due to the longer retention time of ureolytic activity of bacteria at lower temperatures.

Sporosarcina pasteurii can form nanoscale calcium carbonate crystals on cell surface.

The bacterium Sporosarcina pasteurii (SP) is known for its ability to cause the phenomenon of microbially induced calcium carbonate precipitation (MICP). We explored bacterial participation in the initial stages of the MICP process at the cellular length scale under two different growth environments (a) liquid culture (b) MICP in a soft agar (0.5%) column. In the liquid culture, ex-situ imaging of the cellular environment indicated that S. pasteurii was facilitating nucleation of nanoscale crystals of calcium carbonate on bacterial cell surface and its growth via ureolysis. During the same period, the meso-scale environment (bulk medium) was found to have overgrown calcium carbonate crystals. The effect of media components (urea, CaCl2), presence of live and dead in the growth medium were explored. The agar column method allows for in-situ visualization of the phenomena, and using this platform, we found conclusive evidence of the bacterial cell surface facilitating formation of nanoscale crystals in the microenvironment. Here also the bulk environment or the meso-scale environment was found to possess overgrown calcium carbonate crystals. Extensive elemental analysis using Energy dispersive X-ray spectroscopy (EDS) and X-ray powder diffraction (XRD), confirmed that the crystals to be calcium carbonate, and two different polymorphs (calcite and vaterite) were identified. Active participation of S. pasteurii cell surface as the site of calcium carbonate precipitation has been shown using EDS elemental mapping with Scanning transmission electron microscopy (STEM) and scanning electron microscopy (SEM).

Immobilization of cadmium by hydroxyapatite converted from microbial precipitated calcite.

As one of the most toxic heavy elements, humans are mainly exposed to cadmium (Cd) via daily diets and smoking. Calcite can be used as an amendment directly or precipitated in situ based on microbial-induced carbonate precipitation (MICP) technology to immobilize Cd in soil with potential release of Cd due to calcite dissolution. Therefore, we converted microbial-induced calcite to less soluble hydroxyapatite and investigated the phase and morphology evolutions of the solids, as well as the immobilized efficiency, distribution and release of Cd. The results showed that the conversion of calcite to hydroxyapatite enhanced Cd removal efficiency up to 1.67% and 33.14% compared to the MICP process and adsorption by calcite, respectively. Accordingly, the released Cd decreased up to 94.10% and 99.96%, respectively. Our findings demonstrated that the conversion of calcite to hydroxyapatite might control the environmental behavior of heavy metals like Cd and can potentially be applied for soil remediation.

Rational Control of Calcium Carbonate Precipitation by Engineered Escherichia coli.

Ureolytic bacteria ( e.g., Sporosarcina pasteurii) can produce calcium carbonate (CaCO3). Tailoring the size and shape of biogenic CaCO3 may increase the range of useful applications for these crystals. However, wild type Sporosarcina pasteurii is difficult to genetically engineer, limiting control of the organism and its crystal precipitates. Therefore, we designed, constructed, and compared different urease operons and expression levels for CaCO3 production in engineered Escherichia coli strains. We quantified urease expression and calcium uptake and characterized CaCO3 crystal phase and morphology for 13 engineered strains. There was a weak relationship between urease expression and crystal size, suggesting that genes surrounding the urease gene cluster affect crystal size. However, when evaluating strains with a wider range of urease expression levels, there was a negative relationship between urease activity and polycrystal size (e.g., larger crystals with lower activity). The resulting range of crystal morphologies created by the rationally designed strains demonstrates the potential for controlling biogenic CaCO3 precipitation.