ABSTRACT
Radiation dosimetry is an important task for assessing the biological damages created in human being due to ionising radiation exposure. Ionising radiation being invisible and beyond the perception of human natural sensors, the dosimetry equipments/systems are the utmost requirement for its measurement. Retrospective measurement of radiation doses is a challenging task as conventional radiation dosemeters are not available at the exposure site. The material/s in close proximity of exposed individual or individuals' biological samples may be used as retrospective radiation sensor for dosimetry purpose. Environment materials such as sand, bricks, ceramics, sand stones, quartz, feldspar, glasses and electronic chips have been utilised using TL (Thermoluminescence) techniques for retrospective gamma dose (min 10 cGy) measurement. Electron Spin Resonance techniques have been employed to human biological samples such as tooth enamel, bones, nails, hair, etc. and reported for dosimetry for ~20 cGy min dose measurement. Some commercial glasses have been found sensitive enough to measure the minimum gamma doses of the order of 100 cGy using TL techniques. For internal retrospective dosimetry, the radioactivity contamination assessment in food items, water, other edible product and ambient air are the prerequisites. The radioactivity concentration vis-à-vis their consumption rate may help in controlling the internal contamination and estimation of dose absorption in human body. Defence Laboratory, Jodhpur has been working extensively on the dosimetry techniques for external dose measurement using environmental material and developed portable contamination monitoring systems for food and water radioactivity measurement in the range of 50 Bq kg-1 to 1000 kBq kg-1 in 60 s measurement time. The recent research and development in the methodologies, equipments and systems undertaken towards capacity building and self-reliance in retrospective radiation dosimetry is reported in this paper.
Subject(s)
Radiation Dosage , Radiation Monitoring , Thermoluminescent Dosimetry , Humans , Retrospective Studies , Radiation Monitoring/methods , Thermoluminescent Dosimetry/methods , Thermoluminescent Dosimetry/instrumentation , Radiometry/methods , Gamma Rays , Electron Spin Resonance Spectroscopy/methods , Radiation, IonizingABSTRACT
The dosimetry of different minerals is carried out to investigate the dose received by the population in case of a nuclear accident. Retrospective dosimetry is a field where there is a continuous search to find new materials. Beach sand minerals, namely quartz and zircon, were exposed to beta and gamma radiation and studied separately. A comparison of the thermoluminescence (TL) output of different peaks of quartz for beta and gamma was studied. Comparison of quartz peaks with the TL output of zircon peaks was carried out. TL output for a constant dose of gamma is always higher compared to the TL output received due to beta.
Subject(s)
Gamma Rays , Quartz , Thermoluminescent Dosimetry , Zirconium , Quartz/chemistry , Zirconium/chemistry , Thermoluminescent Dosimetry/methods , Thermoluminescent Dosimetry/instrumentation , Beta Particles , Radiation Dosage , Humans , Radiation Monitoring/methods , Radioactive Hazard Release , SilicatesABSTRACT
In India, the prevailing approach to eye lens dosimetry is the placement of an existing dosemeter on the forehead region after slight modification serves as a dedicated Eye Lens Dosemeter. A methodology for estimating the eye lens dose in terms of the Hp(3) has been previously explored employing an algorithm based on the response characteristics of this dosemeter using ISO slab phantom. It was observed that the performance of the dosemeter in terms of Hp(3) using previous algorithm showed under response at higher angles of incidence and photon beams of energy < 200 keV. Further, study was conducted to modify the algorithm following the latest ISO recommendations. This involved generation of data from the response of existing dosemeter on a cylindrical phantom. The results of this study revealed better performance of the newly established algorithm in estimating eye lens dose in terms of Hp(3) when compared to the earlier algorithm.
Subject(s)
Algorithms , Lens, Crystalline , Phantoms, Imaging , Thermoluminescent Dosimetry , Humans , Calibration , Lens, Crystalline/radiation effects , Thermoluminescent Dosimetry/instrumentation , Thermoluminescent Dosimetry/methods , Radiation Dosage , Photons , Head/radiation effects , India , Radiation Protection/standards , Radiation Protection/instrumentationABSTRACT
The measurement of linear energy transfer (LET) is crucial for the evaluation of the radiation effect in heavy ion therapy. As two detectors which are convenient to implant into the phantom, the performance of CR-39 and thermoluminescence detector (TLD) for LET measurement was compared by experiment and simulation in this study. The results confirmed the applicability of both detectors for LET measurements, but also revealed that the CR-39 detector would lead to potential overestimation of dose-averaged LET compared with the simulation by PHITS, while the TLD would have a large uncertainty measuring ions with LET larger than 20 keVµm-1. The results of this study were expected to improve the detection method of LET for therapeutic carbon beam and would finally be benefit to the quality assurance of heavy ion radiotherapy.
Subject(s)
Heavy Ion Radiotherapy , Linear Energy Transfer , Thermoluminescent Dosimetry , Thermoluminescent Dosimetry/instrumentation , Phantoms, Imaging , Carbon , Equipment Design , Polyethylene GlycolsABSTRACT
The metrological quality of a measurement is characterised by evaluating the uncertainty in the measurement. In this paper, uncertainty in personal dose measured using individual monitoring CaSO4:Dy-based thermoluminescence dosimeter badge is evaluated by application of the guide to the expression of uncertainty in measurement method. The present dose reporting quantity, whole body dose (WBD) and the proposed quantity, personal dose equivalent, Hp(10) has been used as measurands. The influence of various input quantities on the measurement were analyzed through tests that conform to the requirements of the International Electrotechnical Commission IEC 62387. The study found that the expanded uncertainties for WBD and Hp(10) measurements were 63.4% and 41.4%, respectively, corresponding to a 95% coverage probability for workplace fields covering a wide photon energy range (33-1250 keV). However, the uncertainty estimates were quite lower for the type of workplaces that are identified using the dose evaluation algorithm. The input quantities, namely, the response to a mixture of photon beam qualities and photon energy and angular dependence contribute the most to the total uncertainty.
Subject(s)
Occupational Exposure , Radiation Dosage , Thermoluminescent Dosimetry , Workplace , Thermoluminescent Dosimetry/instrumentation , Thermoluminescent Dosimetry/methods , Humans , Occupational Exposure/analysis , Uncertainty , Radiation Monitoring/methods , Algorithms , Dysprosium/chemistry , Photons , Radiation Protection/methods , Radiation Protection/standards , Radiation DosimetersABSTRACT
The features of the glow curves of LiF:Mg,Ti are dependent on many parameters of irradiation, storage, ionisation density and readout. These are presented herein with emphasis on their complexity. Successful applications require some understanding of the great diversity of the glow curves. Glow curve analysis/deconvolution in order to better understand the mechanisms is a 'tricky business' even with Tm-Tstop analysis. In the theoretical framework of spatially correlated trapping and luminescent centres, a mechanism is described which simulates the behaviour of composite peak 5 at different cooling rates and following photon bleaching at 3.65 eV.
Subject(s)
Fluorides , Lithium Compounds , Magnesium , Thermoluminescent Dosimetry , Titanium , Lithium Compounds/chemistry , Magnesium/chemistry , Fluorides/radiation effects , Fluorides/chemistry , Thermoluminescent Dosimetry/instrumentation , Thermoluminescent Dosimetry/methods , Titanium/chemistry , Luminescence , PhotonsABSTRACT
The integration of the ORION digital signal processing-based MCA system coupled with a 3â³ × 3â³ NaI(Tl) detector assembly with a GM detector for counting beta (ß) has eliminated the need for a standalone ß-γ method in which U3O8 is determined by gross ß and gross γ counting. Uraniferous and mixed U-Th samples were taken up for study and compared with the results obtained from Canberra p-type coaxial high resolution gamma ray spectrometry detector. In uraniferous samples, U3O8 values obtained are within ±10%, whereas in the case of mixed U-Th samples, U3O8 values are within ±15%. Regression graphs drawn between the outcomes from the two analytical systems indicate R2 > 0.95 for Ra(eU3O8) and ThO2. In uraniferous samples, the R2 value for U3O8 was found to be > 0.99, but in mixed U-Th samples, it is 0.92. The closeness of agreement between the results obtained from two methods at various concentrations over the analytical range shows that the integrated system is suitable for the quantitative determination of eU3O8, U3O8, Ra(eU3O8), ThO2 and K in geological rock samples.
Subject(s)
Radiation Monitoring , Spectrometry, Gamma , Radiation Monitoring/methods , Radiation Monitoring/instrumentation , Spectrometry, Gamma/methods , Spectrometry, Gamma/instrumentation , Beta Particles , Uranium/analysis , Europium/chemistry , Europium/analysis , Thermoluminescent Dosimetry/instrumentation , Thermoluminescent Dosimetry/methods , Signal Processing, Computer-Assisted , Thallium/analysis , Thorium/analysis , Sodium IodideABSTRACT
This study aimed to evaluate the dose reduction using gonad shielding (GS) during pelvic imaging. Three types of pelvic images (radiography, magnetic resonance and computed tomography) were fused to elucidate the three-dimensional relationship between the position of ovaries and GS. To estimate the dose received by the ovaries, the off-axis dose at any given depth was measured under two different imaging conditions using thermoluminescence dosemeters and a polymethyl methacrylate phantom. The mean ovarian depth was 8.4 cm. The mean estimated ovarian dose without an additional filter was 0.36 mGy without GS and 0.14 mGy with GS. The mean estimated ovarian dose with an additional filter was 0.24 mGy without GS and 0.10 mGy with GS. The efficacy of ovarian dose reduction should be evaluated based on the achieved ovarian dose, considering the ovarian depth and use of additional filtration, rather than the ovarian protection rate of GS.
Subject(s)
Ovary , Pelvis , Phantoms, Imaging , Radiation Dosage , Radiation Protection , Female , Humans , Radiation Protection/methods , Ovary/radiation effects , Ovary/diagnostic imaging , Pelvis/diagnostic imaging , Magnetic Resonance Imaging/methods , Tomography, X-Ray Computed/methods , Thermoluminescent Dosimetry/instrumentation , Gonads/radiation effectsABSTRACT
The health risk of staying in space is a well-known fact, and the radiation doses to the astronauts must be monitored. The Pille-ISS thermoluminescent dosimeter system is present on the International Space Station (ISS) since 2003. We present an analysis of 60000 data points over 19 years from the 90 min automatic measurements and show a 4-day-long segment of 15 min measurements. In the case of the 15 min we show that the mapping of the radiation environment for the orbit of the ISS is possible with the Pille system. From our results the dose rates inside the South Atlantic Anomaly (SAA) are at least 1 magnitude higher than outside. From the 90 min data, we select orbits passing through the SAA. A statistical correlation in the SAA between the ISS altitude and monthly mean dose rate is presented with the Spearman correlation value of ρSAA=0.56. The dose rate and the sunspot number show strong inverse Pearson correlation (R2=-0.90) at a given altitude.
Subject(s)
Astronauts , Spacecraft , Thermoluminescent Dosimetry , Spacecraft/instrumentation , Thermoluminescent Dosimetry/instrumentation , Thermoluminescent Dosimetry/methods , Humans , Radiation Dosage , Radiation Monitoring/instrumentation , Radiation Monitoring/methods , Cosmic Radiation , Space FlightABSTRACT
In respect of radiation exposure assessments, thermoluminescent dosimeters (TLD) represent a notable and important subset of passive detector technology, gaining widespread use over a period of many decades, not least for medical applications. TLDs are available in a range of physical and chemical forms, in particular the popularity of phosphor-based commercial products arising from features that include availability down to low mm dimensions, soft-tissue equivalence in some cases, and relatively low TL fading. Novel doped silica glass TL material fabricated as fibres also offer favourable responses, recent developments in co-doping leading to their ability to also provide for diagnostic radiology applications, adding to the attractive features of being impervious to water, of good sensitivity, and generally offering wide dynamic range. Thus said, doping and fibre fabrication involve relatively high costs. Accordingly, herein exploratory investigations are made of the cost-effective colourless silica-based glass medium from which marbles are made, reduced into chip form for ease of application, examining sensitivity to dose. In particular, the study focuses on the computerised tomography clinical application regime, 80- to 140 kVp, with excellent response being shown for doses within the range 2- to 50 mGy.
Subject(s)
Thermoluminescent Dosimetry/instrumentation , Tomography, X-Ray Computed/methods , GlassABSTRACT
Present study concerns the key thermoluminescence (TL) properties of photonic crystal fibres (PCFs), seeking development of alternatively structured TL materials that are able to offer a advantages over existing passive dosimeters. In terms of their internal structure and light guiding properties the PCFs, collapsed and structured, differ significantly from that of conventional optical fibres. To investigate the dosimetric parameters of the PCFs use was made of a linear accelerator producing a 6 MV photon beam, delivering doses ranging from 0.5 Gy to 8 Gy. The parameters studied included TL response, linearity index, glow curves, relative sensitivity and TL signal fading, the results being compared against those obtained using TLD-100 chips. At 4 Gy photon dose the Ge-doped collapsed PCFs were found to provide a response 27 × that of structured PCF, also giving a TL yield similar to that of standard TLD-100 chips. Over post-irradiation periods of 15 and 30 days collapsed PCF TL signal fading were 8% and 17% respectively, with corresponding values of 37% and 64% for the structured PCF. Trapping parameters including the order of kinetics (b), activation energy (E) and frequency factor (s-1) were assessed with Chen's peak shape method. Lifetime of trapping centre was found to be (2.36 E+03) s and (9.03 E +01) s regarding the collapsed and structured PCF respectively with 6 Gy of photon beam. For the Ge-doped collapsed PCF, the high TL yield, sensitivity and low fading provide the basis of a highly promising system of TLD for radiotherapy applications.
Subject(s)
Photons , Radiotherapy Dosage , Thermoluminescent Dosimetry/instrumentation , Crystallization , Germanium/chemistryABSTRACT
This study used thermoluminescent dosimeters (TLDs) to measure cumulative radiation doses in a PET/CT center. It covered 18 areas and four personnel groups. Because the isolated lead shielding separated the patients from the nurses, wearing protective clothing when injecting radiopharmaceuticals was unnecessary. Fingertip doses of the dispensing and nurse groups were below the occupational limit. Current radiopharmaceutical transportation and injection operations in this PET/CT center provide considerable radiation protection to medical personnel.
Subject(s)
Hospitals , Occupational Exposure/analysis , Personnel, Hospital , Positron Emission Tomography Computed Tomography/adverse effects , Humans , Radiopharmaceuticals/analysis , Thermoluminescent Dosimetry/instrumentationABSTRACT
For x- and gamma- irradiations delivering entrance doses from 2- up to 1000 Gy to commercial 1.0 mm thick borosilicate glass microscope slides, study has been made of their thermoluminescence yield. With an effective atomic number of 10.6 (approximating bone equivalence), photon energy dependency is apparent in the low x-ray energy range, with interplay between the photoelectric effect and attenuation. As an example, over the examined dose range, at 120 kVp the photon sensitivity has been found to be some 5× that of 60Co gamma irradiations, also with repeatability to within ~1%. The glow-curves, taking the form of a single prominent broad peak, have been deconvolved yielding at best fit a total of five peaks, the associated activation energies and frequency factors also being obtained. The results indicate borosilicate glass slides to offer promising performance as a low-cost passive radiation dosimeter, with utility for both radiotherapy and industrial applications.
Subject(s)
Boron Compounds/chemistry , Photons , Radiation Dosimeters , Silicates/radiation effects , Thermoluminescent Dosimetry/instrumentation , Boron Compounds/radiation effects , Dose-Response Relationship, Radiation , Gamma Rays , Humans , Radiation Dosage , Silicates/chemistry , Thermoluminescent Dosimetry/methods , X-RaysABSTRACT
Our purpose was to evaluate whether the position of a thermoluminescent dosimeter (TLD) crystal results in different exposure readings. Methods: Nine subjects wore 2 TLD badges (one facing inward, toward the palm, and one facing outward) for 2 mo. Both TLDs were worn on the middle finger of the dominant hand, with the inward-facing TLD placed at the bottom and the outward-facing TLD at the top. At the end of the first month, these TLDs were replaced with new ones for another month. Combined results from the badges for the 2 mo were recorded in millisieverts. A paired t test with 2-sample means was performed to compare the 2 positions in general nuclear medicine and PET/CT subjects, with an α of 0.05. Results: For all subjects and for the general nuclear medicine and PET/CT groups, mean exposure was greater for the inward-facing TLD. Conclusion: For a TLD worn on the dominant hand, extremity-exposure readings are maximized when the TLD faces inward.
Subject(s)
Thermoluminescent Dosimetry/instrumentation , Humans , Positron Emission Tomography Computed TomographyABSTRACT
As a result of the various evolving needs, thermoluminescence dosimetry is constantly under development, with applications intended in environmental and personal radiation monitoring through to the sensing of radiotherapy and radiation processing doses. In radiotherapy dosimetry challenges include small-field profile evaluation, encompassing the fine beams of radiosurgery, evaluations confronting the steep dose gradients of electronic brachytherapy and the high dose rates of FLASH radiotherapy. Current work concerns the thermoluminescent dosimetric properties of commercial low-cost borosilicate glass in the form of thin (sub-mm to a few mm) plates, use being made of microscope cover-slips irradiated using clinical external-beam radiotherapy facilities as well as through use of 60Co gamma irradiators. In using megavoltage photons and MeV electrons, characterization of the dosimetric response has been made for cover-slips of thicknesses up to 4 mm. Reproducibility to within +/5% has been obtained. In particular, for doses up to 10 Gy, the borosilicate cover-slips have been demonstrated to have considerable potential for use in high spatial resolution radiotherapy dosimetry, down to 0.13 mm in present work, with a coefficient of determination in respect of linearity of >0.99 for the thinner cover-slips. Results are also presented for 0.13- and 1.00-mm thick cover slips irradiated to 60Co gamma-ray doses, initially in the range 5- to 25 Gy, subsequently extended to 5 kGy-25 kGy, again providing linear response.
Subject(s)
Glass , Microscopy/instrumentation , Thermoluminescent Dosimetry/instrumentationABSTRACT
PURPOSE: Optically stimulated luminescence dosimeter (OSLDs) are often used to make in vivo dose measurements. Most users calibrate the OSLDs using the software provided by the vendor which typically is intended for doses up to about 300 cGy with an uncertainty of ±5.5%. OSLDs that reach that dose are then discarded, and new ones are purchased and calibrated. A method has been developed for reusing OSLDs and predicting dose sensitivity up to at least 7000 cGy. MATERIALS AND METHODS: The nanoDot OSLDs used in this study were routinely used to do in vivo measurements for TBI patients. Instead of using the calibration program provided by the vendor, each nanoDot was bleached to about 100 counts (~0.1 cGy), then calibrated with 50 cGy to produce a sensitivity specific to each nanoDot prior to the patient measurement. NanoDots were read in the hardware mode and the sensitivity factor was applied manually to subsequent patient in-vivo TBI measurements. This was followed by bleaching prior to the next use. The changes of nanoDot sensitivity relative to accumulated dose were analyzed among nine nanoDots. In addition, a method to predict a nanoDot's sensitivity was investigated which aims to reduce the number of sensitivity calibrations while retaining dosimetric accuracy. RESULTS: Individual per-use nanodot calibrations were performed up to 7000 cGy for 37 clinical TBI patients. Among the nine nanoDots analyzed in this paper, the sensitivity vs accumulated dose decreased linearly up to about 3000 cGy, with linear fitting curve R2 values above 0.93. After 3000 cGy of accumulated dose, the sensitivity started to plateau and tended to increase by 6000 cGy, with 2nd order polynomial curve R2 values above 0.94. With this finding, an efficient and accurate method to predict nanoDots' sensitivities was developed. With the method applied to the nine OSLDs, a total of 127 sensitivities were predicted and retrospectively compared with measured sensitivities. The predicted sensitivities agreed with measured sensitivities within ±4.0% with an average of -0.8%. CONCLUSIONS: This study is the first to demonstrate the reuse of nanoDot OSLDs on numerous patients with accumulated dose up to 7000 cGy. Our nanoDot re-usage methodology is accurate, cost-saving and feasible. A time-saving method is also provided that allows a user to reuse a nanoDot with sensitivities predicted with better accuracy than the 5.5% value provided by the conventional batch calibration method.
Subject(s)
Equipment Reuse , Limit of Detection , Thermoluminescent Dosimetry/instrumentation , HumansABSTRACT
In the last few years there has been an increasing interest in the measurement of the absorbed dose from radionuclides, with special attention devoted to molecular radiotherapy treatments. In particular, the determination of the absorbed dose from beta emitting radionuclides in liquid solution poses a number of issues when dose measurements are performed using thermoluminescent dosimeters (TLD). Finite volume effect, i.e. the exclusion of radioactivity from the volume occupied by the TLD is one of these. Furthermore, TLDs need to be encapsulated into some kind of waterproof envelope that unavoidably contributes to beta particle attenuation during the measurement. The purpose of this study is twofold: I) to measure the absorbed dose to water, Dw, using LiF:Mg,Cu,P chips inside a PMMA cylindrical phantom filled with a homogenous 90YCl3 aqueous solution II) to assess the uncertainty budget related to Dw measurements. To this purpose, six cylindrical PMMA phantoms were manufactured at ENEA. Each phantom can host a waterproof PMMA stick containing 3 TLD chips encapsulated by a polystyrene envelope. The cylindrical phantoms were manufactured so that the radioactive liquid environment surrounds the whole stick. Finally, Dw measurements were compared with Monte Carlo (MC) calculations. The measurement of absorbed dose to water from 90YCl3 radionuclide solution using LiF:Mg,Cu,P TLDs turned out to be a viable technique, provided that all necessary correction factors are applied. Using this method, a relative combined standard uncertainty in the range 3.1-3.7% was obtained on each Dw measurement. The major source of uncertainty was shown to be TLDs calibration, with associated uncertainties in the range 0.7-2.2%. Comparison of measured and MC-calculated absorbed dose per emitted beta particle provided good results, with the two quantities being in the ratio 1.08.
Subject(s)
Copper/chemistry , Fluorides/chemistry , Lithium Compounds/chemistry , Magnesium/chemistry , Phosphorus/chemistry , Thermoluminescent Dosimetry/instrumentation , Thermoluminescent Dosimetry/methods , Yttrium Radioisotopes , Algorithms , Calibration , Humans , Monte Carlo Method , Phantoms, Imaging , Radiation Dosimeters , Radioisotopes , Radiometry , Reproducibility of Results , Water/chemistryABSTRACT
Ruthenium-106 ophthalmic applicators have proven to be effective when using beta emitters in brachytherapy. For dose calculations , typically, the dosimetric reference data given by the manufacturer are used. An additional check of the applicators is usually not provided. However, the medical physicist is responsible for correct dosimetry in the clinic; therefore dosimetric verification is desirable. Despite the fact that the use of beta-ray emitting sealed brachytherapy sources is a safe treatment method, errors can occur (Kaulich et al., 2004). Hence, a method for absolute dose measurements based on the use of thin layer MCP-N-thermoluminescence detectors (TLD Poland, Krakow, Poland) is described in this study. A custom-made polymethyl methacrylate (PMMA)- based phantom was developed for this study. The surface of the phantom was designed to fit with spherical shells of ruthenium-106 ophthalmic applicators (e.g. applicator type CCA, CCB and CIA by Eckert & Ziegler BEBIG GmbH, Berlin, Germany) studied in this work. To verify the reference data from the source certificates, absolute point dose values were measured at different phantom depths with the thermoluminescence detectors and compared to the certificate values. Calibrations of the thermoluminescence detectors were performed in a water phantom with a 6 MV CLINAC (Artiste, Siemens Medical, Erlangen, Germany) before. A comparison with scintillator measurement results given by the manufacturer in the applicator certificate shows the measurement series of absolute dose using MCP-N thin layer detectors being in good accordance with the values of the applicator certificate. The dose values calculated with the source certificate can be confirmed with a maximum deviation of 6.5%. Further, it can be shown that compared to TLD-100, the use of MCP-N thermoluminescence detectors is an advantage, when calibrating with 6 MV photons. The phantom measuring procedure presented in this study provides a practice-oriented realization for quality control of ruthenium-106 ophthalmic applicators in clinical routine The phantom seems capable of performing periodic system tests, as well as controlling the introduction of new applicators delivered by the manufacturer.
Subject(s)
Brachytherapy/instrumentation , Brachytherapy/methods , Eye Neoplasms/radiotherapy , Quality Control , Ruthenium Radioisotopes/administration & dosage , Thermoluminescent Dosimetry/instrumentation , Phantoms, Imaging , Radiotherapy Dosage , Ruthenium Radioisotopes/therapeutic useABSTRACT
A new thermoluminescence albedo dosemeter with improved properties is developed as part of the TL-DOS project. The dosemeter measures the neutron and photon whole-body dose of radiation workers. The TL-DOS neutron dosemeter is presented and its results of well-known field measurements as well as field calibrations are shown. Its advantages, such as its potential to measure the high-linear energy transfer peaks, its improved detector sensitivity and long detector lifetime, are explained. The new dosemeter is compared to a thermoluminescence albedo dosemeter already used in routine dosimetry in Germany.
Subject(s)
Occupational Exposure/analysis , Radiation Dosage , Thermoluminescent Dosimetry/instrumentation , Calibration , Equipment Design , Germany , Humans , Linear Energy Transfer , Neutrons , Photons , Sensitivity and SpecificityABSTRACT
Changes in the relative biological effectiveness (RBE) of the radiation-induced cell killing of human salivary glands (HSG) were assessed along the Bragg peak of a 60 MeV clinical proton beam by means of coupling biophysical models with the results of Monte Carlo radiation transport simulations and experimental measurements with luminescent detectors. The fluence- and dose-mean unrestricted proton LET were determined along the Bragg peak using a recently developed methodology based on the combination of the response of 7LiF:Mg,Ti (MTS-7) and 7LiF:Mg,Cu,P (MCP-7) thermoluminescent detectors. The experimentally assessed LET values were compared with the results of radiation transport simulations using the Monte Carlo code PHITS, showing a good agreement. The cell survival probabilities and RBE were then calculated using the linear-quadratic model with the linear term derived using a phenomenological LET-based model (Carabe A et al 2012 Phys. Med. Biol. 57 1159) in combination with the experimentally-assessed or PHITS-simulated dose mean proton LET values. To the same aim, PHITS simulated microdosimetric spectra were used as input to the modified microdosimetric kinetic model (modified MKM, (Kase et al 2006 Radiat. Res. 166 629-38)). The RBE values calculated with the three aforementioned approaches were compared and found to be in very good agreement between each other, proving that by using dedicated pairs of thermoluminescent detectors it is possible to determine ionization density quantities of therapeutic proton beams which can be applied to predict the local value of the RBE.