Saturation Transfer Difference NMR and Molecular Docking Interaction Study of Aralkyl-Thiodigalactosides as Potential Inhibitors of the Human-Galectin-3 Protein.

Human Galectin-3 (hGal-3) is a protein that selectively binds to ß-galactosides and holds diverse roles in both normal and pathological circumstances. Therefore, targeting hGal-3 has become a vibrant area of research in the pharmaceutical chemistry. As a step towards the development of novel hGal-3 inhibitors, we synthesized and investigated derivatives of thiodigalactoside (TDG) modified with different aromatic substituents. Specifically, we describe a high-yielding synthetic route of thiodigalactoside (TDG); an optimized procedure for the synthesis of the novel 3,3'-di-O-(quinoline-2-yl)methyl)-TDG and three other known, symmetric 3,3'-di-O-TDG derivatives ((naphthalene-2yl)methyl, benzyl, (7-methoxy-2H-1-benzopyran-2-on-4-yl)methyl). In the present study, using competition Saturation Transfer Difference (STD) NMR spectroscopy, we determined the dissociation constant (Kd) of the former three TDG derivatives produced to characterize the strength of the interaction with the target protein (hGal-3). Based on the Kd values determined, the (naphthalen-2-yl)methyl, the (quinolin-2-yl)methyl and the benzyl derivatives bind to hGal-3 94, 30 and 24 times more strongly than TDG. Then, we studied the binding modes of the derivatives in silico by molecular docking calculations. Docking poses similar to the canonical binding modes of well-known hGal-3 inhibitors have been found. However, additional binding forces, cation-π interactions between the arginine residues in the binding pocket of the protein and the aromatic groups of the ligands, have been established as significant features. Our results offer a molecular-level understanding of the varying affinities observed among the synthesized thiodigalactoside derivatives, which can be a key aspect in the future development of more effective ligands of hGal-3.

Glycomimetic inhibitors of tandem-repeat galectins: Simple and efficient.

The binding of human galectins by glycomimetic inhibitors is a promising therapeutic approach. The structurally distinct group of tandem-repeat galectins has scarcely been studied so far, and there is hardly any knowledge on their ligand specificity or their inhibitory potential, particularly concerning non-natural carbohydrates. Here, we present the synthesis of a library of seven 3-O-disubstituted thiodigalactoside-derived glycomimetics and their affinity to two tandem-repeat galectins, Gal-8 and Gal-9. The straightforward synthesis of these glycomimetics involved dibutyltin oxide-catalyzed 3,3́-O-disubstitution of commercially available unprotected thiodigalactoside, and conjugation of various aryl substituents by copper-catalyzed Huisgen azide-alkyne cycloaddition (CuAAC). The inhibitory potential of the prepared glycomimetics for Gal-8 and Gal-9 was assessed, and compared with the established galectins Gal-1 and Gal-3. The introduction of C-3 substituents resulted in an over 40-fold increase in affinity compared with unmodified TDG. The structure-affinity relations within the studied series were discussed using molecular modeling. Furthermore, the prepared glycomimetics were shown to scavenge Gal-8 and Gal-9 from the surface of cancer cells. This pioneering study on the synthetic inhibitors especially of Gal-9 identified lead compounds that may be used in further biomedical research.

Surface characteristics and wettability of novel gingival col designed 3-D printed dental sectional matrices.

OBJECTIVE: The physical properties and wettability of 3-D printed Polyethylene terephthalate - glycol (PET-G) and Poly(lactic) acid (PLA) dental sectional matrices were investigated. METHODS: Experimental matrices was designed in a rectangular shape one-side depression corresponds to gingival col and without sharp edges and printed on FDM machine Ender Pro 3 (Creality®, Shenzhen, China). The physical textures, thicknesses, water contact angles were compared to conventional stainless steel (SS) matrix. RESULTS: PETG and PLA sample matrices were clinically single-side smooth compared to SS matrix. PETG specimens had uniformly 0.055 mm whereas PLAs were non-uniformly ∼0.065-0.075 mm in thickness. The mean ± standard deviation (SS) of contact angle for SS was 78.29 ± 0.18, for PETG was 72.09 ± 0.94, for PLA was 73.03 ± 1.17. CONCLUSION: PETG and PLA dental matrices might have desirable properties: being hydrophobic, non-charged, easy to manufacture and mimicking the gingival col depression in the dental interproximal contact area.

Using particle dimensionality-based modeling to estimate lung carcinogenicity of 3D printer emissions.

The use of 3D printing technologies by industry and consumers is expanding. However, the approaches to assess the risk of lung carcinogenesis from the emissions of 3D printers have not yet been developed. The objective of the study was to demonstrate a methodology for modeling lung cancer risk related to specific exposure levels as derived from an experimental study of 3D printer emissions for various types of filaments (ABS, PLA, and PETG). The emissions of 15 filaments were assessed at varying extrusion temperatures for a total of 23 conditions in a Class 1,000 cleanroom following procedures described by ANSI/CAN/UL 2904. Three approaches were utilized for cancer risk estimation: (a) calculation based on PM2.5 and PM10 concentrations, (b) a proximity assessment based on the pulmonary deposition fraction, and (c) modeling based on the mass-weighted aerodynamic diameter of particles. The combined distribution of emitted particles had the mass median aerodynamic diameter (MMAD) of 0.35 µm, GSD 2.25. The average concentration of PM2.5 was 25.21 µg/m3 . The spline-based function of aerodynamic diameter allowed us to reconstruct the carcinogenic potential of seven types of fine and ultrafine particles (crystalline silica, fine TiO2 , ultrafine TiO2 , ambient PM2.5 and PM10, diesel particulates, and carbon nanotubes) with a correlation of 0.999, P < 0.00001. The central tendency estimation of lung cancer risk for 3D printer emissions was found at the level of 14.74 cases per 10,000 workers in a typical exposure scenario (average cumulative exposure of 0.3 mg/m3 - years), with the lowest risks for PLA filaments, and the highest for PETG type.

Self-Immolative Hydrogels with Stimulus-Mediated On-Off Degradation.

Hydrogels are of interest for a wide range of applications from sensors to drug delivery and tissue engineering. Self-immolative polymers, which depolymerize from end-to-end following a single backbone or end-cap cleavage, offer advantages such as amplification of the stimulus-mediated cleavage event through a cascade degradation process. It is also possible to change the active stimulus by changing only a single end-cap or linker unit. However, there are very few examples of self-immolative polymer hydrogels, and the reported examples exhibited relatively poor stability in their nontriggered state or slow degradation after triggering. Described here is the preparation of hydrogels composed of self-immolative poly(ethyl glyoxylate) (PEtG) and poly(ethylene glycol) (PEG). Hydrogels formed from 2 kg/mol 4-arm PEG and 1.2 kg/mol PEtG with a light-responsive linker end-cap had high gel content (90%), an equilibrium water content of 89%, and a compressive modulus of 26 kPa. The hydrogel degradation could be turned on and off repeatedly through alternating cycles of irradiation and dark storage. Similar cycles could also be used to control the release of the anti-inflammatory drug celecoxib. These results demonstrate the potential for self-immolative hydrogels to afford a high degree of control over responses to stimuli in the context of smart materials for a variety of applications.

Discovery and Optimization of the First Highly Effective and Orally Available Galectin-3 Inhibitors for Treatment of Fibrotic Disease.

Galectin-3 is a carbohydrate-binding protein central to regulating mechanisms of diseases such as fibrosis, cancer, metabolic, inflammatory, and heart disease. We recently found a high affinity (nM) thiodigalactoside GB0139 which currently is in clinical development (PhIIb) as an inhaled treatment of idiopathic pulmonary fibrosis. To enable treatment of systemically galectin-3 driven disease, we here present the first series of selective galectin-3 inhibitors combining high affinity (nM) with oral bioavailability. This was achieved by optimizing galectin-3 specificity and physical chemical parameters for a series of disubstituted monogalactosides. Further characterization showed that this class of compounds reduced profibrotic gene expression in liver myofibroblasts and displayed antifibrotic activity in CCl4-induced liver fibrosis and bleomycin-induced lung fibrosis mouse models. On the basis of the overall pharmacokinetic, pharmacodynamic, and safety profile, GB1211 was selected as the clinical candidate and is currently in phase IIa clinical trials as a potential therapy for liver cirrhosis and cancer.

Genetic targeting or pharmacological inhibition of galectin-3 dampens microglia reactivity and delays retinal degeneration.

BACKGROUND: Dysfunctional humoral and cellular innate immunity are key components in the development and progression of age-related macular degeneration (AMD). Specifically, chronically activated microglia and their disturbed regulatory system contribute to retinal degeneration. Galectin-3, a ß-galactose binding protein, is a potent driver of macrophage and microglia activation and has been implicated in neuroinflammation, including neurodegenerative diseases of the brain. Here, we hypothesized that genetic deficiency of galectin-3 or its modulation via TD139 dampens mononuclear phagocyte reactivity and delays retinal degeneration. METHODS: Galectin-3 expression in AMD patients was analyzed by immunohistochemical stainings. Galectin-3 knockout and BALB/cJ mice were exposed to white bright light with an intensity of 15,000 lux for 1 h and Cx3cr1GFP/+ mice to focal blue light of 50,000 lux for 10 min. BALB/cJ and Cx3cr1GFP/+ mice received intraperitoneal injections of 15 mg/kg TD139 or vehicle for five consecutive days, starting one day prior to light exposure. The effects of galectin-3 deficiency or inhibition on microglia were analyzed by immunohistochemical stainings and in situ hybridization of retinal sections and flat mounts. Pro-inflammatory cytokine levels in the retina and retinal pigment epithelium (RPE) were quantified by qRT-PCR and transcriptomic changes were analyzed by RNA-sequencing. Retinal thickness and structure were evaluated by optical coherence tomography. RESULTS: We found that galectin-3 expression was strongly upregulated in reactive retinal mononuclear phagocytes of AMD patients and in the two related mouse models of light-induced retinal degeneration. The experimental in vivo data further showed that specific targeting of galectin-3 by genetic knockout or administration of the small-molecule inhibitor TD139 reduced microglia reactivity and delayed retinal damage in both light damage conditions. CONCLUSION: This study defines galectin-3 as a potent driver of retinal degeneration and highlights the protein as a drug target for ocular immunomodulatory therapies.

Emission Profiles of Volatiles during 3D Printing with ABS, ASA, Nylon, and PETG Polymer Filaments.

In this short communication we characterize the emission of volatile organic compounds (VOCs) from fused filament fabrication (FFF) 3D printing using four polymer materials, namely polyethylene terephthalate glycol-modified (PETG), acrylonitrile styrene acrylate (ASA), Nylon, and acrylonitrile butadiene styrene (ABS). Detailed emission profiles are obtained during thermal degradation of the polymers as a function of temperature and also in real-time during 3D printing. Direct quantitative measurement was performed using proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS). Qualitative determination of the volatiles emitted from the printed elements at various temperatures was accomplished using gas chromatography-mass spectrometry (GC-MS). The emission rates of VOCs differ significantly between the different polymer filaments, with the emission from Nylon and PETG more than an order of magnitude lower than that of ABS.

Efficient and specific bioaccumulation of arsenic in the transgenic Escherichia coli expressing ArsR1 from Corynebacterium glutamicum.

The toxic nature of arsenic has left a trail of disastrous health consequences around the world. Microorganisms have developed various strategies to deal with arsenic. The presence of plasmid and chromosomal ars operons is one of the most important mechanisms for the detoxification of arsenic in bacteria. ArsR is a trans-acting regulatory protein and acts as a repressor on ars operon. The gene encoding ArsR from Corynebacterium glutamicum (CgArsR1) was cloned in expression vectors pET28a. The resulting constructs were transformed into Escherichia coli strains Rosetta (DE3) and Rosetta gami 2. Following the induction with Isopropyl ß-D-1-thiogalactopyranoside, the protein His-CgArsR1 was found in the soluble fraction of strain Rg-CgArsR1. For comparison, ArsR from E. coli was also overexpressed in E. coli (strain Rosetta gami 2) as His-EcArsR. A strain containing empty vector pET28a was also used as a control strain. In the medium containing either arsenite (0.5 mM) or arsenate (0.5 mM), the strain Rg-CgArsR1 and Rg-EcArsR were able to accumulate 1200 and 700 µg/g DCW As3+, respectively. In comparison, the accumulation of As5+ in these strains was 338 and 232 µg/g DCW, respectively. Whereas both strains Rg-CgArsR1 and Rg-EcArsR were able to accumulate higher amounts of As3+ and As5+ with respect to control strain, the accumulation of arsenic in the strain Rg-CgArsR1 was significantly more efficient than strain Rg-EcArsR for removing As3+ and As5+. Based on the results the gene encoding CgArsR1 is a useful and efficient target gene for the modification of bacteria for bioremediation of arsenic from polluted soil and water.

Glycopolymers Decorated with 3-O-Substituted Thiodigalactosides as Potent Multivalent Inhibitors of Galectin-3.

Galectin-3 (Gal-3) participates in many cancer-related metabolic processes. The inhibition of overexpressed Gal-3 by, e.g., ß-galactoside-derived inhibitors is hence promising for cancer treatment. The multivalent presentation of such inhibitors on a suitable biocompatible carrier can enhance the overall affinity to Gal-3 and favorably modify the interaction with Gal-3-overexpressing cells. We synthesized a library of C-3 aryl-substituted thiodigalactoside inhibitors and their multivalent N-(2-hydroxypropyl)methacrylamide (HPMA)-based counterparts with two different glycomimetic contents. Glycopolymers with a higher content of glycomimetic exhibited a higher affinity to Gal-3 as assessed by ELISA and biolayer interferometry. Among them, four candidates (with 4-acetophenyl, 4-cyanophenyl, 4-fluorophenyl, and thiophen-3-yl substitution) were selected for further evaluation in cancer-related experiments in cell cultures. These glycopolymers inhibited Gal-3-induced processes in cancer cells. The cyanophenyl-substituted glycopolymer exhibited the strongest antiproliferative, antimigratory, antiangiogenic, and immunoprotective properties. The prepared glycopolymers appear to be prospective modulators of the tumor microenvironment applicable in the therapy of Gal-3-associated cancers.

Synthesis of fluorinated thiodigalactoside analogues.

In this work, we report the first synthesis of fluorinated thiodigalactoside analogues. We used tri-isopropylsilyl thioglycosides as masked glycosyl thiol nucleophiles for the elaboration of two monofluorinated heterodimers, one difluorinated homodimer, and one difluorinated heterodimer. Moreover, we also present an alternative synthesis of 3-deoxy-3-fluorogalactose and 4-deoxy-4-fluorogalactose from a common precursor. Finally, this small set of more stable thiodigalactoside analogues could be interesting inhibitors of galactose-specific lectins.

Molecular mechanism of interspecies differences in the binding affinity of TD139 to Galectin-3.

Galectin-3 (Gal-3), a ß-galactoside-binding lectin, has been implicated in a plethora of pathological disorders including fibrosis, inflammation, cancer and metabolic diseases. TD139-a thio-digalactoside inhibitor developed by Galecto Biotech as a potential therapeutic for idiopathic pulmonary fibrosis-is the most advanced small-molecule Gal-3 inhibitor in clinical studies. It binds to human Gal-3 with high affinity but has lower affinity towards mouse and rat homologs, which is also manifested in the differential inhibition of Gal-3 function. Using biophysical methods and high-resolution X-ray co-crystal structures of TD139 and Gal-3 proteins, we demonstrate that a single amino acid change corresponding to A146 in human Gal-3 is sufficient for the observed reduction in the binding affinity of TD139 in rodents. Site-directed mutagenesis of A146V (in human Gal-3) and V160A (in mouse Gal-3) was sufficient to interchange the affinities, mainly by affecting the off rates of the inhibitor binding. In addition, molecular dynamics simulations of both wild-type and mutant structures revealed the sustained favorable noncovalent interactions between the fluorophenyl ring and the active site A146 (human Gal-3 and mouse V160A) that corroborate the finding from biophysical studies. Current findings have ramifications in the context of optimization of drug candidates against Gal-3.

Effect of Photocaged Isopropyl ß-d-1-thiogalactopyranoside Solubility on the Light Responsiveness of LacI-controlled Expression Systems in Different Bacteria.

Photolabile protecting groups play a significant role in controlling biological functions and cellular processes in living cells and tissues, as light offers high spatiotemporal control, is non-invasive as well as easily tuneable. In the recent past, photo-responsive inducer molecules such as 6-nitropiperonyl-caged IPTG (NP-cIPTG) have been used as optochemical tools for Lac repressor-controlled microbial expression systems. To further expand the applicability of the versatile optochemical on-switch, we have investigated whether the modulation of cIPTG water solubility can improve the light responsiveness of appropriate expression systems in bacteria. To this end, we developed two new cIPTG derivatives with different hydrophobicity and demonstrated both an easy applicability for the light-mediated control of gene expression and a simple transferability of this optochemical toolbox to the biotechnologically relevant bacteria Pseudomonas putida and Bacillus subtilis. Notably, the more water-soluble cIPTG derivative proved to be particularly suitable for light-mediated gene expression in these alternative expression hosts.

Regioselective 3-O-Substitution of Unprotected Thiodigalactosides: Direct Route to Galectin Inhibitors.

The synthesis of tailored bioactive carbohydrates usually comprises challenging (de)protection steps, which lowers synthetic yields and increases time demands. We present here a regioselective single-step introduction of benzylic substituents at 3-hydroxy groups of ß-d-galactopyranosyl-(1→1)-thio-ß-d-galactopyranoside (TDG) employing dibutyltin oxide in good yields. These glycomimetics act as inhibitors of galectins-human lectins, which are biomedically attractive targets for therapeutic inhibition in, for example, cancerogenesis. The affinity of the prepared glycomimetics to galectin-1 and galectin-3 was studied in enzyme-linked immunosorbent (ELISA)-type assays and their potential to inhibit galectin binding on the cell surface was shown. We used our original in vivo biotinylated galectin constructs for easy detection by flow cytometry. The results of the biological experiments were compared with data from molecular modeling with both galectins. The present work reveals a facile and elegant synthetic route for the preparation of TDG-derived glycomimetics that exhibit differing selectivity and affinity to galectins depending on the choice of 3-O-substitution.

Diversity in kinetics correlated with structure in nano body-stabilized LacY.

The structure of lactose permease, stabilized in a periplasmic open conformation by two Gly to Trp replacements (LacYww) and complexed with a nanobody directed against this conformation, provides the highest resolution structure of the symporter. The nanobody binds in a different manner than two other nanobodies made against the same mutant, which also bind to the same general region on the periplasmic side. This region of the protein may represent an immune hotspot. The CDR3 loop of the nanobody is held by hydrogen bonds in a conformation that partially blocks access to the substrate-binding site. As a result, kon and koff for galactoside binding to either LacY or the double mutant complexed with the nanobody are lower than for the other two LacY/nanobody complexes though the Kd values are similar, reflecting the fact that the nanobodies rigidify structures along the pathway. While the wild-type LacY/nanobody complex clearly stabilizes a similar 'extracellular open' conformation in solution, judged by binding kinetics, the complex with wild-type LacY did not yet crystallize, suggesting the nanobody does not bind strongly enough to shift the equilibrium to stabilize a periplasmic side-open conformation suitable for crystallization. However, the similarity of the galactoside binding kinetics for the nanobody-bound complexes with wild type LacY and with LacYWW indicates that they have similar structures, showing that the reported co-structures reliably show nanobody interactions with LacY.

Efficient synthesis of a galectin inhibitor clinical candidate (TD139) using a Payne rearrangement/azidation reaction cascade.

Selective galectin inhibitors are valuable research tools and could also be used as drug candidates. In that context, TD139, a thiodigalactoside galectin-3 inhibitor, is currently being evaluated clinically for the treatment of idiopathic pulmonary fibrosis. Herein, we describe a new strategy for the preparation of TD139. Starting from inexpensive levoglucosan, we used a rarely employed reaction cascade: Payne rearrangement/azidation process leading to 3-azido-galactopyranose. The latter intermediate was efficiently converted into TD139 in a few simple and practical steps.

Structure and Energetics of Ligand-Fluorine Interactions with Galectin-3 Backbone and Side-Chain Amides: Insight into Solvation Effects and Multipolar Interactions.

Multipolar fluorine-amide interactions with backbone and side-chain amides have been described as important for protein-ligand interactions and have been used to improve the potency of synthetic inhibitors. In this study, fluorine interactions within a well-defined binding pocket on galectin-3 were investigated systematically using phenyltriazolyl-thiogalactosides fluorinated singly or multiply at various positions on the phenyl ring. X-ray structures of the C-terminal domain of galectin-3 in complex with eight of these ligands revealed potential orthogonal fluorine-amide interactions with backbone amides and one with a side-chain amide. The two interactions involving main-chain amides seem to have a strong influence on affinity as determined by fluorescence anisotropy. In contrast, the interaction with the side-chain amide did not influence affinity. Quantum mechanics calculations were used to analyze the relative contributions of these interactions to the binding energies. No clear correlation could be found between the relative energies of the fluorine-main-chain amide interactions and the overall binding energy. Instead, dispersion and desolvation effects play a larger role. The results confirm that the contribution of fluorine-amide interactions to protein-ligand interactions cannot simply be predicted, on geometrical considerations alone, but require careful consideration of the energetic components.

Extracellular and intracellular small-molecule galectin-3 inhibitors.

Galectin-3 is a carbohydrate binding protein which has important roles in cancer and immunity. Potent galectin-3 inhibitors have been synthesized, for experimental purposes and potential clinical use. As galectin-3 is implicated in both intra- and extracellular activities, permeability of galectin-3 inhibitors is an important parameter determining biological effects. We compared the cellular uptake of galectin-3 inhibitors and their potency in the intracellular or extracellular space. The inhibitors differed in their polar surface area (PSA), but had similar affinities for galectin-3. Using a well-established permeability assay, we confirmed that the uptake was significantly higher for the inhibitor with the lowest PSA, as expected. To analyze intracellular activity of the inhibitors, we developed a novel assay based on galectin-3 accumulation around damaged intracellular vesicles. The results show striking differences between the inhibitors intracellular potency, correlating with their PSAs. To test extracellular activity of the inhibitors, we analyzed their potency to block binding of galectin-3 to cell surfaces. All inhibitors were equally able to block galectin-3 binding to cells and this was proportional to their affinity for galectin-3. These inhibitors may serve as useful tools in exploring biological roles of galectin-3 and may further our understanding of intracellular versus extracellular roles of galectin-3.

Highly Stable Artificial Cells from Galactopyranose-Derived Single-Chain Amphiphiles.

Single-chain amphiphiles (SCAs) that self-assemble into large vesicular structures are attractive components of synthetic cells because of the simplicity of bilayer formation and increased membrane permeability. However, SCAs commonly used for vesicle formation suffer from restricted working pH ranges, instability to divalent cations, and the inhibition of biocatalysts. Construction of more robust biocompatible membranes from SCAs would have significant benefits. We describe the formation of highly stable vesicles from alkyl galactopyranose thioesters. The compatibility of these uncharged SCAs with biomolecules makes possible the encapsulation of functional enzymes and nucleic acids during the vesicle generation process, enabling membrane protein reconstitution and compartmentalized nucleic acid amplification, even when charged precursors are supplied externally.

Development of photoswitchable inhibitors for ß-galactosidase.

Azobenzenes are of particular interest as a photochromic scaffold for biological applications because of their high fatigue resistance, their large geometrical change between extended (trans) and bent (cis) isomer, and their diverse synthetic accessibility. Despite their wide-spread use, there is no reported photochromic inhibitor of the well-investigated enzyme ß-galactosidase, which plays an important role for biochemistry and single molecule studies. Herein, we report the synthesis of photochromic competitive ß-galactosidase inhibitors based on the molecular structure of 2-phenylethyl ß-d-thiogalactoside (PETG) and 1-amino-1-deoxy-ß-d-galactose (ß-d-galactosylamine). The thermally highly stable PETG-based azobenzenes show excellent photochromic properties in polar solvents and moderate to high photostationary states (PSS). The optimized compound 37 is a strong competitive inhibitior of ß-galactosidase from Escherichia coli and its inhibition constant (Ki) changes between 60 nM and 290 nM upon irradiation with light. Additional docking experiments supported the observed structure-activity relationship.