Blue-Light-Activated Water-Soluble Sn(IV)-Porphyrins for Antibacterial Photodynamic Therapy (aPDT) against Drug-Resistant Bacterial Pathogens.

Antimicrobial resistance has emerged as a global threat to the treatment of infectious diseases. Antibacterial photodynamic therapy (aPDT) is a promising alternative approach and is highly suitable for the treatment of cutaneous bacterial infections through topical applications. aPDT relies on light-responsive compounds called photosensitizer (PS) dyes, which generate reactive oxygen species (ROS) when induced by light, thereby killing bacterial cells. Despite several previous studies in this area, the molecular details of targeting and cell death mediated by PS dyes are poorly understood. In this study, we further investigate the antibacterial properties of two water-soluble Sn(IV) tetrapyridylporphyrins that were quaternized with methyl and hexyl groups (1 and 2). In this follow-up study, we demonstrate that Sn(IV)-porphyrins can be photoexcited by blue light (a 427 nm LED) and exhibit various levels of bactericidal activity against both Gram-(+) and Gram-(-) strains of bacteria. Using localization studies through fluorescence microscopy, we show that 2 targets the bacterial membrane more effectively than 1 and exhibits comparatively higher aPDT activity. Using multiple fluorescence reporters, we demonstrate that photoactivation of 1 and 2 results in extensive collateral damage to the bacterial cells including DNA cleavage, membrane damage, and delocalization of central systems necessary for bacterial growth and division. In summary, this investigation provides deep insights into the mechanism of bacterial killing mediated by the Sn(IV)-porphyrins. Moreover, our approach offers a new method for evaluating the activity of PS, which may inspire the discovery of new PS with enhanced aPDT activity.

Optimization of synergistic capturing platinum group metals by Fe-Sn and its mechanism.

Platinum group metals (PGMs) are strategic metals. Auto-exhaust catalysts are their main application fields. The recovery of PGMs from spent auto-exhaust catalysts has remarkable economic value and strategic significance. Aiming at the problems of ferrosilicon generation for Fe capturing and subsequent oxygen blowing to remove iron with high energy consumption and heat release, a technology of Fe-Sn synergistic capturing PGMs was proposed. Taking full the advantage of the lower melting point of Fe-Sn alloy (<1200 °C) and its unique affinity for PGMs, the PGMs were captured at approximate 1400 °C with Fe-Sn as the collector. In experiment, 500 g of spent auto-exhaust catalysts were employed to minimize error and approximate industrial production. The mechanism of Fe-Sn synergistic capturing PGMs was elucidated. The generation of Fe-Sn-PGMs alloy lowered the activity of [PGMs] in the system, accelerated the reduction of the PGMs oxides and promoted the alloying of [PGMs]. Therefore, Fe-Sn synergistic capturing PGMs was realized. The inability of Si to enter the alloy phase was confirmed by theoretical calculations, avoiding the generation of ferrosilicon. The effects of basicity, CaF2, m(Fe)/m(Sn) and the amount of collector on capturing PGMs were optimized. Under the optimized conditions (basicity R = 1.1, spent auto-exhaust catalysts 70 wt%, CaO 30 wt%, B2O3 10 wt%, CaF2 7 wt%, m(Fe)/m(Sn) = 1/1 and the collector 15 wt%), the content of PGMs in the slag phase was 2.46 g/t. It is feasible to remove Fe and Sn by oxidation to achieve the purpose of PGMs enrichment. This technology offers guidance on the safe, environmentally sound, and efficient disposal of spent auto-exhaust catalysts, promoting the sustainable development of PGMs.

Impact of Sn-doping on the optoelectronic properties of zinc oxide crystal: DFT approach.

This study aims to provide a concise overview of the behavior exhibited by Sn-doped ZnO crystals using a computational technique known as density functional theory (DFT). The influence of Sn doping on the electronic, structural, and optical properties of ZnO have been explored. Specifically, the wavelength dependent refractive index, extinction coefficient, reflectance, and absorption coefficient, along with electronic band gap structure of the Sn doped ZnO has been examined and analyzed. In addition, X-ray diffraction (XRD) patterns have been obtained to investigate the structural characteristics of Sn-doped ZnO crystals with varying concentrations of Sn dopant atoms. The incorporation of tin (Sn) into zinc oxide (ZnO) has been observed to significantly impact the opto-electronic properties of the material. This effect can be attributed to the improved electronic band structure and optical characteristics resulting from the tin doping. Furthermore, the controllable structural and optical characteristics of tin-doped zinc oxide will facilitate the development of various light-sensitive devices. Moreover, the impact of Sn doping on the optoelectronic properties of ZnO is thoroughly investigated and documented.

Synthesis of gold-tin alloy nanoparticles with tunable plasmonic properties.

Plasmonic nanoparticles and nanocrystalline materials have broad applicability in catalysis, optoelectronics, sensing, and sustainability. Below, we detail a robust protocol for the synthesis of bimetallic Au-Sn nanoparticles in mild, aqueous conditions. This protocol describes the steps for synthesizing gold nanoparticle seeds, diffusing Sn into the seeds by chemical reduction, and the optical and structural analysis by UV-visible spectroscopy, X-ray diffraction, and electron microscopy. For complete details on the use and execution of this protocol, please refer to Fonseca Guzman et al.1.

Synthesis and structural elucidation of a unique turn-off fluorescent sensor based on oxo-bridged tin (IV) cluster for selective detection of dopamine in biological fluids.

An oxo-bridged Sn (IV) Cluster, (TOC) was synthesized and fully characterized by FT-IR, UV-vis, 1H NMR, 119Sn NMR, Mass spectrometry and single crystal X-ray diffraction studies. The single-crystal X-ray analysis revealed that the crystal crystallizes in the monoclinic crystal system possessing the P 21/c space group and exhibited a distorted trigonal bipyramidal geometry. The TOC exhibited a unique turn-off fluorescence response for the selective detection of dopamine (DA) over other analytes. The stoichiometry between the TOC and DA was calculated using Job's plot. The value of the detection limit was found to be 1.33 µM. The Hirshfeld surface analysis was carried out on the crystal structure to investigate the H-H, Cl-H, Cl-Cl, Sn-Cl and Cl-C interaction studies in the molecule. Density Functional Theory (DFT) studies further supported the sensing mechanism, which closely agreed with the experimental results. Furthermore, the TOC chemosensor was used to detect DA in human blood plasma, and molecular docking studies validated the interaction between the chemosensor and protein. Confocal fluorescence imaging studies were carried out and validated TOC sensing ability for DA in human blood plasma.

High sensitivity for detecting trace Sn2+ in canned food using novel covalent organic frameworks.

Tin (Sn) element plays a vital role in the human body, and its detection is a mandatory inspection item for canned food. The application of covalent organic frameworks (COFs) in fluorescence detection has received extensive attentions. In this work, we designed a kind of novel COFs (COF-ETTA-DMTA) with high specific surface area (353.13 m2/g) by solvothermal synthesis using 2,5-dimethoxy-1,4-dialdehyde and tetra (4-aminophenyl) ethylene as precursors. It shows fast response time (about 50 s), low detection limit (228 nM) and good linearity (R2 = 0.9968) for the detection of Sn2+. Via coordination behavior, the recognition mechanism of COFs toward Sn2+ was simulated and verified by the small molecule with the same functional unit. More importantly, this COFs was successfully applied to identify Sn2+ in solid canned food (luncheon pork, canned fish, canned red kidney beans) with satisfactory results. This work provides a new approach for determining metal ions with COFs taking the advantage of their natural rich reaction set and specific surface area, improving the detection sensitivity and capacity.

Sn(IV)-Porphyrin-Based Nanostructures Featuring Pd(II)-Mediated Supramolecular Arrays and Their Photocatalytic Degradation of Acid Orange 7 Dye.

Two robust Sn(IV)-porphyrin-based supramolecular arrays (1 and 2) were synthesized via the reaction of trans-Pd(PhCN)2Cl2 with two precursor building blocks (SnP1 and SnP2). The structural patterns in these architectures vary from 2D to 3D depending on the axial ligation of Sn(IV)-porphyrin units. A discrete 2D tetrameric supramolecule (1) was constructed by coordination of {(trans-dihydroxo)[5,10-bis(4-pyridyl)-15,20-bis(phenyl) porphyrinato]}tin(IV) (SnP1) with trans-PdCl2 units. In contrast, the coordination between the {(trans-diisonicotinato)[5,10-bis(4-pyridyl)-15,20-bis(phenyl)porphyrinato]}tin(IV) (SnP2) and trans-PdCl2 units formed a divergent 3D array (2). Axial ligation of the Sn(IV)-porphyrin building blocks not only alters the supramolecular arrays but also significantly modifies the nanostructures, including porosity, surface area, stability, and morphology. These structural changes consequently affected the photocatalytic degradation efficiency under visible-light irradiation towards acid orange 7 (AO) dye in an aqueous solution. The degradation efficiency of the AO dye in the aqueous solution was observed to be between 86% to 91% within 90 min by these photocatalysts.

Dendritic Mesoporous Silica Nanoparticle Supported PtSn Catalysts for Propane Dehydrogenation.

PtSn catalysts were synthesized by incipient-wetness impregnation using a dendritic mesoporous silica nanoparticle support. The catalysts were characterized by XRD, N2 adsorption-desorption, TEM, XPS and Raman, and their catalytic performance for propane dehydrogenation was tested. The influences of Pt/Sn ratios were investigated. Changing the Pt/Sn ratios influences the interaction between Pt and Sn. The catalyst with a Pt/Sn ratio of 1:2 possesses the highest interaction between Pt and Sn. The best catalytic performance was obtained for the Pt1Sn2/DMSN catalyst with an initial propane conversion of 34.9%. The good catalytic performance of this catalyst is ascribed to the small nanoparticle size of PtSn and the favorable chemical state and dispersion degree of Pt and Sn species.

Synthesis and in vitro cytotoxicity study of three di-organotin(IV) Schiff base di-acylhydrazone complexes.

Three di-organotin(IV) complexes have been synthesized by the reaction of Schiff base di-acylhydrazone ligands bis(5-chlorosalicylaldehyde) adipoylhydrazone and R2SnCl2 [R = Me (1), Ph (2), n-Bu (3)]. Structures of all complexes were characterized by 1H, 13C, 119Sn NMR, elemental analysis, IR and mass spectrometry. Experimental results showed that the symmetric diacylhydrazone ligands coordinate the tin atom in a hexadentate form, where the tin atom shows a penta-coordination, in a distorted triangular bipyramid geometry. Using MTT method, in vitro cytotoxicity of three complexes was determined against three cancer cell lines (A549, HeLa, HepG-2). Studies reveal that complex 3 showed the strongest cytotoxic activity among the three complexes, which may be correlated with the generation of intracellular reactive oxygen species. Uptake of complex 3 into cells and promotion of reactive oxygen species were visualized by confocal fluorescence imaging.

Speciation of tin ions in oxide glass containing iron oxide through solvent extraction and inductively coupled plasma atomic emission spectrometry after the decomposition utilizing ascorbic acid.

Determining the concentrations of different Sn ions in glass containing iron oxide by wet chemical analysis is a challenge because a redox reaction occurs between Sn2+ and Fe3+. A chemical analysis method for determining the concentrations of Sn2+ and Sn4+ in soda lime glass containing iron oxide was proposed. A mixture of ascorbic acid, hydrochloric acid, and hydrofluoric acid was used to decompose the sample in a vessel with nitrogen flow. Ascorbic acid functioned as a reductant for Fe3+. Subsequently, the Sn2+ were separated as a diethyldithiocarbamate complex. Furthermore, inductively coupled plasma atomic emission spectroscopy was used to determine the concentrations of Sn4+ and total Sn, from which the concentration of Sn2+ can be calculated. The results were validated by comparing ratios of Sn2+ to total Sn to results obtained using Mössbauer spectroscopy. The results were in agreement, thereby validating the use of the proposed approach.

In vitro DNA binding, pBR322 cleavage and molecular docking studies of 1,2-diaminobenzene, dichloro glycyl glycinate tin(IV) and zirconium(IV) complexes.

De novo design and synthesis of complexes 1,2-diaminobenzene, dichloro glycyl glycinate tin(IV) and zirconium(IV), 1 and 2 as molecular drug entities were carried out. The structure elucidation of 1 and 2 was done by analytical techniques and spectroscopic methods viz. IR, UV-vis, 1H, 13C, 119Sn NMR, ESI-Mass and XRD techniques. In vitro DNA binding studies of 1 and 2 by various biophysical techniques viz electronic absorption, emission spectroscopy and circular dichroism measurements were carried out to evaluate their potential to act as chemotherapeutic candidates; furthermore, cleavage studies with pBR322plasmid DNA and computer-aided molecular docking studies were also done to study the mechanistic pathway and mode of binding at the molecular level. The observed results revealed that complex 1 exhibited greater DNA binding propensity in contrast to complex 2 primarily via electrostatic binding mode. The pBR322 DNA cleavage studies of both the complexes revealed the hydrolytic cleavage mechanism and DNA minor groove binding, which was ascertained by molecular docking studies of the drug candidate. Communicated by Ramaswamy H. Sarma.

Tin Carboxylate Complexes of Natural Bacteriochlorin for Combined Photodynamic and Chemotherapy of Cancer è.

Photodynamic therapy (PDT) is currently one of the most promising methods of cancer treatment. However, this method has some limitations, including a small depth of penetration into biological tissues, the low selectivity of accumulation, and hypoxia of the tumor tissues. These disadvantages can be overcome by combining PDT with other methods of treatment, such as radiation therapy, neutron capture therapy, chemotherapy, etc. In this work, potential drugs were obtained for the first time, the molecules of which contain both photodynamic and chemotherapeutic pharmacophores. A derivative of natural bacteriochlorophyll a with a tin IV complex, which has chemotherapeutic activity, acts as an agent for PDT. This work presents an original method for obtaining agents of combined action, the structure of which is confirmed by various physicochemical methods of analysis. The method of molecular modeling was used to investigate the binding of the proposed drugs to DNA. In vitro biological tests were carried out on several lines of tumor cells: Hela, A549, S37, MCF7, and PC-3. It was shown that the proposed conjugates of binary action for some cell lines had a dark cytotoxicity that was significantly higher (8-10 times) than the corresponding metal complexes of amino acids, which was explained by the targeted chemotherapeutic action of the tin (IV) complex due to chlorin. The greatest increase in efficiency relative to the initial dipropoxy-BPI was found for the conjugate with lysine as a chelator of the tin cation relative to cell lines, with the following results: S-37 increased 3-fold, MCF-7 3-fold, and Hela 2.4-fold. The intracellular distribution of the obtained agents was also studied by confocal microscopy and showed a diffuse granular distribution with predominant accumulation in the near nuclear region.

Low Mg content on Ti-Nb-Sn alloy when in contact with eBMMSCs promotes improvement of its biological functions.

Magnesium is a metal used in the composition of titanium alloys and imparts porosity. Due to its osteoconductive, biocompatible and biodegradable characteristics, its application in the development of biomedical materials has become attractive. This study aimed to evaluate the influence of magnesium present in porous Ti-Nb-Sn alloys, which have a low elastic modulus in adhesive, osteogenic properties and the amount of reactive intracellular oxygen species released in mesenchymal stem cells derived from bone marrow equine bone (eBMMSCs). Mechanical properties of the alloy, such as hardness, compressive strength and elastic modulus, were analyzed, as well as surface morphological characteristics through scanning electron microscopy. The evaluation of magnesium ion release was performed by atomic force spectroscopy. The biological characteristics of the alloy, when in contact with the alloy surface and with the culture medium conditioned with the alloy, were studied by SEM and optical microscopy. Confirmation of osteogenic differentiation by alizarin red and detection of ROS using a Muse® Oxidative Stress Kit based on dihydroetide (DHE). The alloy showed an elastic modulus close to cortical bone values. The hardness was close to commercial Ti grade 2, and the compressive strength was greater than the value of cortical bone. The eBMMSCs adhered to the surface of the alloy during the experimental time. Osteogenic differentiation was observed with the treatment of eBMMMSCs with conditioned medium. The eBMMSCs treated with conditioned medium decreased ROS production, indicating a possible antioxidant defense potential of magnesium release.

Synthesis and Characterization of a Novel Biocompatible Alloy, Ti-Nb-Zr-Ta-Sn.

Many current-generation biomedical implants are fabricated from the Ti-6Al-4V alloy because it has many attractive properties, such as low density and biocompatibility. However, the elastic modulus of this alloy is much larger than that of the surrounding bone, leading to bone resorption and, eventually, implant failure. In the present study, we synthesized and performed a detailed analysis of a novel low elastic modulus Ti-based alloy (Ti-28Nb-5Zr-2Ta-2Sn (TNZTS alloy)) using a variety of methods, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and tensile test. Additionally, the in vitro biocompatibility of the TNZTS alloy was evaluated using SCP-1, SaOs-2, and THP-1 cell lines and primary human osteoblasts. Compared to Ti-6Al-4V, the elastic modulus of TNZTS alloy was significantly lower, while measures of its in vitro biocompatibility are comparable. O2 plasma treatment of the surface of the alloy significantly increased its hydrophilicity and, hence, its in vitro biocompatibility. TNZTS alloy specimens did not induce the release of cytokines by macrophages, indicating that such scaffolds would not trigger inflammatory responses. The present results suggest that the TNZTS alloy may have potential as an alternative to Ti-6Al-4V.

Tin derived antimony/nitrogen-doped porous carbon (Sb/NPC) composite for electrochemical sensing of albumin from hepatocellular carcinoma patients.

An electrochemical sensor based on an antimony/nitrogen-doped porous carbon (Sb/NPC) composite has been developed for the quantitative detection of albumin from hepatocellular carcinoma (HCC) patients. Sb/NPC is hydrothermally synthesized from Sn/NPC precursors. The synthesized precursor (Sn/NPC) and the product (Sb/NPC) are characterized by XRD, FTIR, TGA, UV/Vis, SEM, and AFM. Cyclic voltammetry, chronoamperometry, and electrochemical impedance studies are used to investigate the electrochemical performance of Sb/NPC-GCE. Sb/NPC-GCE detects albumin at physiological pH of 7.4 in the potential range 0.92 V and 0.09 V for oxidation and reduction, respectively. LOD and recovery of Sb/NPC-GCE for the determination of albumin are 0.13 ng.mL-1 and 66.6 ± 0.97-100 ± 2.73%, respectively. Chronoamperometry of the modified working electrode demonstrates its stability for 14 h, indicating its reusability and reproducibility. Sb/NPC-GCE is a selective sensor for albumin detection in the presence of interfering species. The electrode has been applied for albumin detection in human serum samples of HCC patients. A negative correlation of albumin with alpha-fetoprotein levels in HCC patients is observed by statistical analysis.

Identification of fragment ions produced by the decomposition of tetramethyltin and the production of low-energy Sn+ ion beam.

Tetramethyltin was decomposed in an ion source and the fragment ions produced were identified using a low-energy mass-selected ion beam machine. Dominant fragment ions were found to be H+, CH2+, and Sn+. Subsequently, fragment ions were mass-selected. The mass spectrum of the selected ions indicated that only a single peak appeared at the mass number of 120 u, being suggestive of the presence of 120Sn+ ions. The ion energy was set at the range of 20-100 eV. The Sn+ ion beam was irradiated to a Si substrate, and a film was then found deposited on the substrate after the ion beam irradiation. An X-ray diffraction measurement showed that the film obtained was metallic Sn. Then, the Sn+ ion beam was irradiated to a quartz crystal microbalance substrate. We found that most of the irradiated Sn+ ions were adhered to the substrate, at the ion energy levels of 25 and 58 eV, producing the Sn film, whereas a 107 eV Sn+ beam caused a significant proportion of Sn atoms in the film to detach from the substrate, probably due to sputtering.

The Effect of Plant Essential Oil and Extracts on Fatty Acid Profile of Virgin Olive Oil Stored in Different Packaging Materials.

In this study, the combined effect of different packaging materials (transparent PET, transparent glass, glass-PET bottle and tin), some aromatic herbs (thyme, rosemary, sage and olive leaf) and also their essential oils (thyme, rosemary and sage) on fatty acid composition of virgin olive oil was investigated during storage period. The initial amounts of the main fatty acids as oleic, palmitic and linoleic acids were determined as 72.89%, 11.89% and 8.96%, respectively. The addition of aromatic plants and essential oils did not effect the fatty acid profile. Also, packaging materials had a minor influence on fatty acids. In the 6th month of storage, the oleic acid contents of olive oils showed the increase in all of samples. The highest increase was observed in olive oil stored in glass-PET (74.30-75.01%), followed by stored in glass bottle (73.41-74.82%). Generally, during the storage, the differences of fatty acid contents were in minor level. The fatty acid composition of olive oils stored under different essential oil and extract concentrations showed partial differences depending on the extract type and concentration.

Ultrasonic-assisted electrodeposition of Cu-Sn-TiO2 nanocomposite coatings with enhanced antibacterial activity.

Copper-based coatings are known for their high antibacterial activity. In this study, nanocomposite Cu-Sn-TiO2 coatings were obtained by electrodeposition from an oxalic acid bath additionally containing 4 g/dm3 TiO2 with mechanical and ultrasonic agitation. Ultrasound treatment was performed at 26 kHz frequency and 32 W/dm3 power. The influence of agitation mode and the current load on the inclusion and distribution of the TiO2 phase in the Cu-Sn metallic matrix were evaluated. Results indicated that ultrasonic agitation decreases agglomeration of TiO2 particles and allows for the deposition of dense Cu-Sn-TiO2 nanocomposites. It is shown that nanocomposite Cu-Sn-TiO2 coatings formed by ultrasonic-assisted electrodeposition exhibit excellent antimicrobial properties against E. coli bacteria.

Illuminating Stannylation.

We have developed photoboosted stannylation reactions of terminal alkynes (linear-selective hydrostannylation) and fluoroarenes (defluorostannylation), in which the stannyl anion is photoexcited to an excited triplet (T1) stannyl diradical species. This unprecedented T1-stannyl diradical species shows completely different reactivity and selectivity from those of stannyl anions and stannyl radicals. This methodology is operationally simple, has broad functional group tolerance, and proceeds in high yield without the need for any catalyst.

Synergetic anticancer activity of gold porphyrin appended to phenyl tin malonate organometallic complexes.

The discovery of novel anticancer chemotherapeutics is fundamental to treat cancer more efficiently. Towards this goal, two dyads consisting of a gold porphyrin appended to organotin(iv) entities were synthesized and their physicochemical and biological properties were characterized. One dyad contains a gold porphyrin connected to a tin(iv) cation via a malonate and two phenyl ligands (AuP-SnPh2), while the other contains two tin(iv) cations each chelated to one carboxylic acid group of the malonate and three phenyl ligands (AuP-Sn2Ph6). The mode of chelation of Sn(iv) to the malonate was elucidated by IR spectroscopy and 119Sn NMR. In the solid state, the complexes exist as coordination polymers in which the tin is penta-coordinated and bridged to two different malonate units. In solution the chemical shifts of 119Sn signals indicate that the tin complexes are in the form of monomeric species associated with a tetra-coordinated tin cation. The therapeutic potential of these new compounds was assessed by determining their cytotoxic activities on human breast cancer cells (MCF-7) and on healthy human fibroblasts (FS 20-68). The study reveals that the dyads are more potent anticancer drugs than the mixture of their individual components (gold porphyrin and reference tin complexes). Therefore, the covalent link of organotin complexes to a gold porphyrin induces a synergistic cytotoxic effect. The dyad AuP-SnPh2 shows high cytotoxicity (0.13 µM) against MCF-7 along with good selectivity for cancer cells versus healthy cells. Finally, it was also shown that the dyad AuP-Sn2Ph6 exhibits a very high anticancer activity (LC50 = 0.024 µM), but the presence of two tin units induces strong cytotoxicity on healthy cells too (LC50 = 0.032 µM). This study underscores, thus, the potential of the association of gold porphyrin and organotin complexes to develop anticancer metallo-drugs.