Preventive dental erosion with silver diamine fluoride: An in vitro study.

OBJECTIVES: To evaluate the erosion preventive effect of 38 % silver diamine fluoride (SDF) solution in enamel and dentin of human permanent teeth. METHODS: Ninety enamel and ninety dentin blocks were prepared from permanent molars and allocated into three groups. Gp-SDF received a one-off application of 38 % SDF solution. Gp-SNF received a one-off application of a solution containing 800 ppm stannous chloride and 500 ppm fluoride. Gp-DW received a one-off application of deionized water. The blocks were submitted to acid challenge at pH 3.2, 2 min, 5 times/day for 7 days. All blocks were immersed in human saliva between cycles for one hour. The crystal characteristics, percentage of surface microhardness loss (%SMHL), surface loss, and elemental analysis and surface morphology were examined by X-ray diffraction (XRD), microhardness test, non-contact profilometry, and energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM), respectively. Data of%SMHL and surface loss were analyzed by one-way ANOVA. RESULTS: XRD spectra revealed that fluorapatite and silver compounds formed in Gp-SDF, while fluorapatite and stannous compounds formed in Gp-SNF. Gp-DW presented only hydroxyapatite. The median (interquartile range) of%SMHL in Gp-SDF, Gp-SNF and Gp-DW were 27.86(3.66), 43.41(2.45), and 46.40(3.54) in enamel (p< 0.001), and 14.21(1.57), 27.99(1.95), and 33.18(1.73) in dentin, respectively (p < 0.001). The mean (standard deviation, µm) of surface loss of Gp-SDF, Gp-SNF, and Gp-DW were 2.81(0.59), 4.28(0.67), and 4.63(0.64) in enamel (p < 0.001) and 4.13(0.69), 6.04(0.61), and 7.72(0.66) in dentin, respectively (p < 0.001). SEM images exhibited less enamel corruption and more dentinal tubular occlusion in Gp-SDF compared to Gp-SNF and Gp-DW. EDS analysis showed silver was detected in Gp-SDF while stannous was detected in the dentin block of Gp-SNF. CONCLUSION: 38 % SDF yielded superior results in protecting enamel and dentin blocks from dental erosion compared to SNF and DW. CLINICAL SIGNIFICANCE: Topical application of 38 % SDF is effective in preventing dental erosion in human enamel and dentin.

Exploring the antibiofilm and toxicity of tin oxide nanoparticles: Insights from in vitro and in vivo investigations.

BACKGROUND INFORMATION: The advancement of biological-mediated nanoscience towards higher levels and novel benchmarks is readily apparent, owing to the use of non-toxic synthesis processes and the incorporation of various additional benefits. This study aimed to synthesize stable tin oxide nanoparticles (SnO2-NPs) using S. rhizophila as a mediator. METHODS: The nanoparticles that were created by biosynthesis was examined using several analytical techniques, including Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), UV-visible (UV-vis) spectroscopy, and energy dispersive X-ray spectroscopy (EDS). RESULTS: The results obtained from the characterization techniques suggest that S. rhizophila effectively catalyzed the reduction of SnCl2 to SnO2-NPs duration of 90 min at ambient temperature with the ƛmax of 328 nm. The size of the nano crystallite formations was measured to be 23 nm. The present study investigates nanoscale applications' antibacterial efficacy against four bacterial strains, including Klebsiella Sp, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. The observed zone of inhibition for the nanoparticles (NPs) varied from 10 to 25 mm. The research findings demonstrate that the nanoparticles (NPs) are effective as antibacterial, phytotoxic, and cytotoxic agents.

Ultrasound-driven facile fabrication of Pd doped SnO2 hierarchical superstructures: Structural, growth mechanism, dermatoglyphics, and anti-cancer activity.

This research introduces a novel method that leverages Spirulina extract (S.E) as a bio-surfactant in the ultrasound-assisted synthesis (UAS) of Pd3+ (0.25-10 mol%) doped tin oxide (SnO2) self-assembled superstructures. Nanotechnology has witnessed significant advancements in recent years, driven by the exploration of novel synthesis methods and the development of advanced nanomaterials tailored for specific applications. Metal oxide nanoparticles, particularly SnO2, have garnered considerable attention due to their versatile properties and potential applications in various fields, including gas sensing, catalysis, and biomedical engineering. The study explores how varying influential parameters like S.E concentration, sonication time, pH, and sonication power can influence the resulting superstructures' morphology, size, and shape. A theoretical model for forming different hierarchical superstructures (HS) is proposed. X-ray diffraction (XRD) analysis confirms the crystalline tetragonal rutile phase of the SnO2:Pd HS. Raman spectroscopy reveals a red shift in the A1g mode, indicating phonon confinement due to various defects in the SnO2 structure. Further characterization using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) provides insights into particle size, surface morphology, elemental composition, and binding energy. The study also demonstrates the application of optimized SnO2:3Pd HS in developing latent fingerprints (LFPs) on different surfaces using a simple powder dusting (PD) method, with the fingerprints (FPs) visualized under normal light. A mathematical model developed in Python-based software is used to analyze various features of the developed FPs, including pore properties such as number, position, inter-spacing, area, and shape. Additionally, an in vitro MTT assay shows concentration-dependent anticancer activity of SnO2:3Pd nanoparticles (NPs) on MCF7 cell lines, highlighting their potential as a promising cancer treatment option. Overall, the study suggests that the optimized HS can serve as multifunctional platforms for biomedical and dermatoglyphics applications, demonstrating the versatility and potential of the synthesized materials.

Investigation of antimicrobial and anti-cancer activity of thermally sensitive SnO2 nanostructures with green-synthesized cauliflower morphology at ambient weather conditions.

A tin oxide (SnO2) nanostructure was prepared using Matricaria recutita leaf extract to investigate its anticancer activity against SK-MEL-28 cells. The tetragonal crystal structure of tin oxide nanoparticles with an average crystal size of 27 nm was confirmed by X-ray diffraction (XRD) analysis. The tetragonal crystal structure of the tin oxide nanoparticles, with an average crystallite size of 27 nm, was confirmed by XRD an absorbance peak at 365 nm was identified by UV-visible spectroscopy analysis as belonging to the bio-mediated synthesis of SnO2 nanoparticles. The SnO2 NPs are capped and stabilized with diverse functional groups derived from bioactive molecules, including aldehydes, benzene rings, amines, alcohols, and carbonyl stretch protein molecules. Fourier transform infrared spectroscopy (FTIR) analysis validated the presence of these capping and stabilizing chemical bonds. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies revealed the cauliflower-shaped morphology of the SnO2 nanoparticles with an average particle size of 28 nm. The antimicrobial activity of both prepared and encapsulated samples confirmed their biological activities. Furthermore, both prepared and encapsulated tin oxide samples exhibited excellent anticancer activity against SK-MEL-28 human cancer cells. The present study introduces a reliable and uncomplicated approach to produce SnO2 nanoparticles and demonstrates their effectiveness in various applications, including cancer therapy, drug administration, and disinfectant.

Anti-erosive profile of an experimental 5% SnCl2 varnish containing different concentrations of NaF.

This in vitro study evaluated the anti-erosive effect of an experimental varnish containing 5% stannous chloride (SnCl2) associated with different concentrations of NaF (NaF-free, 2.5% NaF, or 5.2% NaF) on bovine enamel and root dentin. One hundred samples were pre-eroded (0.3% citric acid, pH 2.6, 10 min) and randomized into five groups (n=10 for each substrate): Negative control - milli-Q water; NaF-free - Experimental varnish SnCl2-free and NaF-free; 2.5 NaF - Experimental varnish 5% SnCl2 associated with 2.5% NaF; 5.2 NaF: Experimental varnish 5% SnCl2 associated with 5.2% NaF and positive control - Commercial varnish containing 5% NaF (Duraphat). After the varnishes were applied, the erosive and abrasive challenges were carried out for five days. Loss of tooth structure (TSL) was determined by optical profilometry, and the loss of calcium (ΔCa2+) using atomic absorption spectroscopy. Dentin analysis was also performed by SEM. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The experimental 2.5 NaF and 5.2 NaF groups showed greater effectiveness in preventing TSL when compared to the other groups (p <0.05), regardless of the substrate. In addition, these groups showed lower loss in Ca2+ content when compared to the other groups (p <0.05), for enamel and dentin. Dentin showed greater TSL and ΔCa2+ loss when compared to enamel in all treatments (p <0.05). The 5.2% and 2.5% NaF-containing experimental varnishes showed promising results in both, the prevention of TSL and the loss of Ca2+, regardless of the substrate studied.

Tin oxide nanoparticles trigger the formation of amyloid ß oligomers/protofibrils and underlying neurotoxicity as a marker of Alzheimer's diseases.

Alzheimer's disease (AD) is known as one of the most common forms of dementia, and oligomerization of amyloid ß (Aß42) peptides can result in the onset of AD. Tin oxide nanoparticles (SnO2 NPs) showed several applications in biomedical fields can trigger unwanted interaction with proteins and inducing protein aggregation. Herein, we synthesized SnO2 NPs via the hydrothermal method and characterized by UV-visible, XRD, FTIR, TEM, and DLS techniques. Afterward, the formation of Aß42 amyloid oligomers/protofibrils treated alone and with SnO2 NPs was explored by ThT and Nile red fluorescence and CD spectroscopic methods along with TEM imaging. The neurotoxicity of different spices of Aß42 samples against PC-12 cells was then explored by MTT and caspase-3 activity assays. The characterization of SnO2 NPs confirmed the successful synthesis of crystalline NPs (20-30 nm). Different biophysical and cellular analyses indicated that SnO2 NPs accelerated Aß42 fibrillogenesis and promoted amyloid oligomers/protofibrils cytotoxicity. As compared to the Aß42 samples grown alone, the ThT and ANS fluorescence intensity along with ellipticity results indicated the promotory effect of SnO2 NPs on the formation of oligomers/protofibrils. Also, the cellular results showed that the treated Aß42 samples with SnO2 NPs further reduced cell viability through activation of caspase-3. In conclusion, SnO2 NPs greatly accelerate the fibrillation of Aß42 peptides and lead to the formation of more toxic species. The present data may offer further warrants into nano-based systems for biomedical applications in the central nervous system.

Near-Infrared Upconversion Mesoporous Tin Dioxide Theranostic Nanocapsules for Synergetic Cancer Chemophototherapy.

Smart nanotheranostic systems (SNSs) have attracted extensive attention in antitumor therapy. Nevertheless, constructing SNSs with disease diagnosis ability, improved drug delivery efficiency, inherent imaging performance, and high treatment efficiency remains a scientific challenge. Herein, ultrasmall tin dioxide (SnO2) was assembled with upconversion nanoparticles (UCNPs) to form mesoporous nanocapsules by an in situ hydrothermal deposition method, followed by loading with doxorubicin (DOX) and modification with bovine serum albumin (BSA). pH/near-infrared dual-responsive nanotheranostics was constructed for computed tomography (CT) and magnetic resonance (MR) imaging-induced collaborative cancer treatment. The mesoporous channel of SnO2 was utilized as a reservoir to encapsulate DOX, an antineoplastic drug, for chemotherapy and as a semiconductor photosensitizer for photodynamic therapy (PDT). Furthermore, the DOX-loaded UCNPs@SnO2-BSA nanocapsules combined PDT, Nd3+-doped UCNP-triggered hyperthermia effect, and DOX-triggered chemotherapy simultaneously and demonstrated prominently enhanced treatment efficiency compared to the monotherapy model. Moreover, tin, as one of the trace elements in the human body, has a similar X-ray attenuation coefficient to iodine and therefore can act as a contrast agent for CT imaging to monitor the treatment process. Such an orchestrated synergistic anticancer treatment exhibited apparent inhibition of tumor growth in tumor-bearing mice with negligible side effects. Our study demonstrates nanocapsules with excellent biocompatibility and great potential for cancer treatment.

Induction of mitochondria mediated apoptosis in human ovarian cancer cells by folic acid coated tin oxide nanoparticles.

PURPOSE: This study aims to prepare folic acid coated tin oxide nanoparticles (FA-SnO2 NPs) for specifically targeting human ovarian cancer cells with minimum side effects against normal cells. METHODS: The prepared FA-SnO2 NPs were characterized by FT-IR, UV-vis spectroscopy, XRD, SEM and TEM. The inhibition effects of FA-SnO2 NPs against SKOV3 cancer cell were tested by MTT and LDH assay. Apoptosis induction in FA-SnO2 NPs treated SKOV3 cells were investigated using Annexin V/PI, AO/EB and Comet assays and the possible mechanisms of the cytotoxic action were studied by Flow cytometry, qRT-PCR, Immunohistochemistry, and Western blotting analyses. The effects of FA-SnO2 NPs on reactive oxygen species generation in SKOV3 cells were also examined. Additionally, the safety of utilization FA-SnO2 NPs were studied in vivo using Wister rats. RESULTS: The obtained FA-SnO2 NPs displayed amorphous spherical morphology with an average diameter of 157 nm and a zeta potential value of -24 mV. Comparing to uncoated SnO2 NPs, FA-SnO2 NPs had a superior inhibition effect towards SKOV3 cell growth that was suggested to be mediated through higher reactive oxygen species generation. It was showed that FA-SnO2 NPs increased significantly the % of apoptotic cells in the sub- G1 and G2/M phases with a higher intensity comet nucleus in SKOV3 treated cells. Furthermore, FA-SnO2 NPs was significantly increased the expression levels of P53, Bax, and cleaved Caspase-3 and accompanied with a significant decrease of Bcl-2 in the treated SKOV3 cells. CONCLUSION: Overall, the results suggested that an increase in cellular FA-SnO2 NPs internalization resulted in a significant induced cytotoxicity in SKOV3 cancer cells in dose-dependent mode through ROS-mediated cell apoptosis that may have occurred through mitochondrial pathway. Additionally, the results confirmed the safety of utilization FA-SnO2 NPs against living systems. So, FA-SnO2 NPs with a specific targeting moiety may be a promising therapeutic candidate for human ovarian cancer.

Adhesion of Neurons and Glial Cells with Nanocolumnar TiN Films for Brain-Machine Interfaces.

Coupling of cells to biomaterials is a prerequisite for most biomedical applications; e.g., neuroelectrodes can only stimulate brain tissue in vivo if the electric signal is transferred to neurons attached to the electrodes' surface. Besides, cell survival in vitro also depends on the interaction of cells with the underlying substrate materials; in vitro assays such as multielectrode arrays determine cellular behavior by electrical coupling to the adherent cells. In our study, we investigated the interaction of neurons and glial cells with different electrode materials such as TiN and nanocolumnar TiN surfaces in contrast to gold and ITO substrates. Employing single-cell force spectroscopy, we quantified short-term interaction forces between neuron-like cells (SH-SY5Y cells) and glial cells (U-87 MG cells) for the different materials and contact times. Additionally, results were compared to the spreading dynamics of cells for different culture times as a function of the underlying substrate. The adhesion behavior of glial cells was almost independent of the biomaterial and the maximum growth areas were already seen after one day; however, adhesion dynamics of neurons relied on culture material and time. Neurons spread much better on TiN and nanocolumnar TiN and also formed more neurites after three days in culture. Our designed nanocolumnar TiN offers the possibility for building miniaturized microelectrode arrays for impedance spectroscopy without losing detection sensitivity due to a lowered self-impedance of the electrode. Hence, our results show that this biomaterial promotes adhesion and spreading of neurons and glial cells, which are important for many biomedical applications in vitro and in vivo.

Differential response of immobile (pneumocytes) and mobile (monocytes) barriers against 2 types of metal oxide nanoparticles.

BACKGROUND: Inhaled nanoparticles (NPs) challenges mobile and immobile barriers in the respiratory tract, which can be represented by type II pneumocytes (immobile) and monocytes (mobile) but what is more important for biological effects, the cell linage, or the type of nanoparticle? Here, we addressed these questions and we demonstrated that the type of NPs exerts a higher influence on biological effects, but cell linages also respond differently against similar type of NPs. DESIGN: Type II pneumocytes and monocytes were exposed to tin dioxide (SnO2) NPs and titanium dioxide (TiO2) NPs (1, 10 and 50 µg/cm2) for 24 h and cell viability, ultrastructure, cell granularity, molecular spectra of lipids, proteins and nucleic acids and cytoskeleton architecture were evaluated. RESULTS: SnO2 NPs and TiO2 NPs are metal oxides with similar physicochemical properties. However, in the absence of cytotoxicity, SnO2 NPs uptake was low in monocytes and higher in type II pneumocytes, while TiO2 NPs were highly internalized by both types of cells. Monocytes exposed to both types of NPs displayed higher number of alterations in the molecular patterns of proteins and nuclei acids analyzed by Fourier-transform infrared spectroscopy (FTIR) than type II pneumocytes. In addition, cells exposed to TiO2 NPs showed more displacements in FTIR spectra of biomolecules than cells exposed to SnO2 NPs. Regarding cell architecture, microtubules were stable in type II pneumocytes exposed to both types of NPs but actin filaments displayed a higher number of alterations in type II pneumocytes and monocytes exposed to SnO2 NPs and TiO2 NPs. NPs exposure induced the formation of large vacuoles only in monocytes, which were not seen in type II pneumocytes. CONCLUSIONS: Most of the cellular effects are influenced by the NPs exposure rather than by the cell type. However, mobile, and immobile barriers in the respiratory tract displayed differential response against SnO2 NPs and TiO2 NPs in absence of cytotoxicity, in which monocytes were more susceptible than type II pneumocytes to NPs exposure.

Development of a carboxyl-terminated indium tin oxide electrode for improving cell adhesion and facilitating low noise, real-time impedance measurements.

The working electrode's surface property is crucial to cell adhesion and signal collection in electric cell-substrate impedance sensing (ECIS). To date, the indium tin oxide (ITO)-based working electrode is of interest in ECIS study due to its high transparency and biocompatibility. Of great concern is the impedance signal loss, distortion, and data interpretation conflict profoundly created by the movement of multiple cells during ECIS study. Here, a carboxyl-terminated ITO substrate was prepared by stepwise surface amino silanization, with N-hydroxy succinimide (NHS) and 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide hydrochloride (EDC) treatment, respectively. We investigated the stepwise changes in the property of the treated ITO, cell-substrate adhesion, collective cell mobility, and time course of change in absolute impedance from multiple Chinese hamster ovary (CHO) cells [(Δt-Δ|Z|)CELLS]. The carboxyl-terminated ITO substrate with a surface roughness of 6.37 nm shows enhanced conductivity, 75% visible light transparency, improved cell adherence, reduced collective cell migration speed by approximately twofold, and diminished signal distortion in the [(Δt-Δ|Z|)CELLS]. Thus, our study provides an ITO surface-treatment strategy to reduce multiple cell movement effects and to obtain essential cell information from the ECIS study of multiple cells through undistorted (Δt-Δ|Z|)CELLS.

Oxi-Redox Selective Breast Cancer Treatment: An In Vitro Study of Theranostic In-Based Oxide Nanoparticles for Controlled Generation or Prevention of Oxidative Stress.

In this article, we demonstrate that specifically engineered oxide nanoparticles (NPs) have the potential to act as theranostic materials that are able to generate or prevent oxidative stress through their oxi-redox activity in various types of malignant and nonmalignant cells. The oxi-redox activity is related to the type and presence of surface defects, which is modified with appropriate synthesis conditions. In the present work, we used MDA-MB-231 and MCF-7 human breast cancer cells and nonmalignant MCF-10A human breast cells to demonstrate how controlled oxidative stress mediated by specifically nanoengineered indium tin oxide (ITO) NPs can selectively induce cell death in the cancer cells while reducing the oxidative stress in the normal cells and supporting their proliferation. The ITO NPs are also promising nanotheranostic materials for cancer therapy and contrast agents because of their multimodal imaging capabilities. We demonstrate that the synthesized ITO NPs can selectively increase the generation of reactive oxygen species (ROS) in both breast tumor cell lines, resulting in activation of apoptosis, and can also greatly suppress the cellular proliferation in both types of tumor cells. In contrast, the ITO NPs exhibit ROS scavenging-like behavior, significantly decreasing the ROS levels in MCF-10A cells exposed to the additional ROS, hydrogen peroxide (H2O2), so that they protect the proliferation of nonmalignant MCF-10A cells from ROS damage. In addition, fluorescent microscopy images revealed that the ITO NPs emit strong fluorescence that could be used to reveal their location. Moreover, computed tomography imaging demonstrated that the ITO NPs exhibited a comparable capability toward anatomical contrast enhancement. These results suggest that the synthesized ITO NPs have the potential to be a novel selective therapeutic agent with a multimodal imaging property for anticancer treatment.

SnO2-Doped ZnO/Reduced Graphene Oxide Nanocomposites: Synthesis, Characterization, and Improved Anticancer Activity via Oxidative Stress Pathway.

BACKGROUND: Therapeutic selectivity and drug resistance are critical issues in cancer therapy. Currently, zinc oxide nanoparticles (ZnO NPs) hold considerable promise to tackle this problem due to their tunable physicochemical properties. This work was designed to prepare SnO2-doped ZnO NPs/reduced graphene oxide nanocomposites (SnO2-ZnO/rGO NCs) with enhanced anticancer activity and better biocompatibility than those of pure ZnO NPs. MATERIALS AND METHODS: Pure ZnO NPs, SnO2-doped ZnO (SnO2-ZnO) NPs, and SnO2-ZnO/rGO NCs were prepared via a facile hydrothermal method. Prepared samples were characterized by field emission transmission electron microscopy (FETEM), energy dispersive spectroscopy (EDS), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), ultraviolet-visible (UV-VIS) spectrometer, and dynamic light scattering (DLS) techniques. Selectivity and anticancer activity of prepared samples were assessed in human breast cancer (MCF-7) and human normal breast epithelial (MCF10A) cells. Possible mechanisms of anticancer activity of prepared samples were explored through oxidative stress pathway. RESULTS: XRD spectra of SnO2-ZnO/rGO NCs confirmed the formation of single-phase of hexagonal wurtzite ZnO. High resolution TEM and SEM mapping showed homogenous distribution of SnO2 and rGO in ZnO NPs with high quality lattice fringes without any distortion. Band gap energy of SnO2-ZnO/rGO NCs was lower compared to SnO2-ZnO NPs and pure ZnO NPs. The SnO2-ZnO/rGO NCs exhibited significantly higher anticancer activity against MCF-7 cancer cells than those of SnO2-ZnO NPs and ZnO NPs. The SnO2-ZnO/rGO NCs induced apoptotic response through the upregulation of caspase-3 gene and depletion of mitochondrial membrane potential. Mechanistic study indicated that SnO2-ZnO/rGO NCs kill cancer cells through oxidative stress pathway. Moreover, biocompatibility of SnO2-ZnO/rGO NCs was also higher against normal breast epithelial (MCF10A cells) in comparison to SnO2-ZnO NPs and ZnO NPs. CONCLUSION: SnO2-ZnO/rGO NCs showed enhanced anticancer activity and better biocompatibility than SnO2-ZnO NPs and pure ZnO NPs. This work suggested a new approach to improve the selectivity and anticancer activity of ZnO NPs. Studies on antitumor activity of SnO2-ZnO/rGO NCs in animal models are further warranted.

Anion inhibition studies of the Zn(II)-bound ι-carbonic anhydrase from the Gram-negative bacterium Burkholderia territorii.

Burkholderia territorii, a Gram-negative bacterium, encodes for the ι-class carbonic anhydrase (CA, EC 4.2.1.1) BteCAι, which was recently characterised. It acts as a good catalyst for the hydration of CO2 to bicarbonate and protons, with a kcat value of 3.0 × 105 s-1 and kcat/KM value of 3.9 × 107 M-1 s-1. No inhibition data on this new class of enzymes are available to date. We report here an anion and small molecules inhibition study of BteCAι, which we prove to be a zinc(II)- and not manganese(II)-containing enzyme, as reported for diatom ι-CAs. The best inhibitors were sulphamic acid, stannate, phenylarsonic acid, phenylboronic acid and sulfamide (KI values of 6.2-94 µM), whereas diethyldithiocarbamate, tellurate, selenate, bicarbonate and cyanate were submillimolar inhibitors (KI values of 0.71-0.94 mM). The halides (except iodide), thiocyanate, nitrite, nitrate, carbonate, bisulphite, sulphate, hydrogensulfide, peroxydisulfate, selenocyanate, fluorosulfonate and trithiocarbonate showed KI values in the range of 3.1-9.3 mM.

Near-Infrared Upconversion Mesoporous Tin Oxide Bio-Photocatalyst for H2O2-Activatable O2-Generating Magnetic Targeting Synergetic Treatment.

Tumor hypoxia compromises the therapeutic efficacy of oxygen (O2)-dependent treatment methods as the endogenous O2 levels have an important influence on the production of reaction oxygen species. Herein, a synergistic multifunctional mesoporous Fe@Sn-UCNPs bio-photocatalytic nanoplatform is provided to comprehensively realize endogenous hydrogen peroxide (H2O2)-activatable, self-supplied O2, photothermal performance, and near-infrared-mediated magnetic targeting PDT/PTT simultaneously for relieving tumor hypoxia. Such a nanoplatform is constructed by encapsulating magnetic Fe3O4 with lanthanide-ion-doped mesoporous tin oxide upconversion nanoparticles and further modified with phosphorylated serine and poly(ethylene glycol) for enhancing the biocompatibility and solubility. The nanoparticles can be activated by endogenous H2O2 and in situ generated O2 to relieve hypoxia through catalytic reaction. Therefore, H2O2-responsive/O2-evolving nanoparticles can elevate the O2 level in the tumor site for an apparently enhanced PDT effect in vitro and in vivo. What is more, Fe@Sn-UCNPs demonstrate enhanced photothermal conversion efficiency based on the special nanostructure and much more circuit loops for electron transitions between Fe3O4 and Sn-UCNPs, and the electronic structure of Fe@Sn-UCNPs was calculated. In addition, such Fe@Sn-UCNPs also exhibit multimodality imaging performance (including photothermal, magnetic resonance, and computed tomography imaging) for monitoring and tracking the in vivo tumor therapeutic process. This work provides novel insight into the smart Fe@Sn-UCNPs as an "all-in-one" theranostic nanosystem for cancer therapy.

Synthesis of Co3S4-SnO2/polyvinylpyrrolidone-cellulose heterojunction as highly performance catalyst for photocatalytic and antimicrobial properties under ultra-violet irradiation.

In this work, we present Co3S4-SnO2 supported polyvinylpyrrolidone-cellulose (PVPCS) nano-structure for Lidocaine degradation. The nanostructure was characterized by various techniques i.e. morphological and optical ones. The results have demonstrated that Co3S4-SnO2 nanocomposites were evenly supported on the PVPCS. Moreover, the photocatalysis performances of the catalysts were investigated under ultra-violet (UV) light irradiation. The nano-structure Co3S4-SnO2/PVPCS composite (98.72%) revealed the highest photocatalysis performance as compared to SnO2 nanoparticles, and Co3S4-SnO2 nanocomposites. The photo-stability of nano-structure Co3S4-SnO2/PVPCS composite was characterized using cyclic catalytic experimental. Results demonstrated a substantially stable performance of the nano-structure Co3S4-SnO2/PVPCS composite. The biological properties of Co3S4-SnO2/PVPCS composite were investigated through the antibacterial (versus Staphylococcus aureus, and Escherichia coli) and antifungal studies (Candida albicans). As the results declared, Co3S4-SnO2 nanocomposites have substantial biological properties as compared to SnO2 nanoparticles, and Co3S4-SnO2 nanocomposites.

A hypoxia-activated antibacterial prodrug.

A prodrug based on a known antibacterial compound is reported to target Staphylococcus aureus and Escherichia coli under reductive conditions. The prodrug was prepared by masking the N-terminus and side chain amines of a component lysine residue as 4-nitrobenzyl carbamates. Activation to liberate the antibacterial was demonstrated on treatment with a model reductant, tin(II) chloride. The bioactivity of 1 was confirmed in antibacterial susceptibility assays whereas prodrug 2 was inactive.

Antibiofilm Action of ZnO, SnO2 and CeO2 Nanoparticles Towards Grampositive Biofilm Forming Pathogenic Bacteria.

BACKGROUND: The ability to form biofilm and produce several virulence factors has caused numerous human pathogens to become tremendously resistant towards traditional antibiotic treatments, thus, new alternative strategies are urgently in demand. One of the strategies that have recently been developed involves the application of metallic Nanoparticles (NPs). Up to the present, promising results in terms of antimicrobial and antibiofilm activities have been observed in a wide range of metal NPs. METHODS: The present study has selected three metal oxides such as ZnO, SnO2 and CeO2 NPs to comparatively investigate their antibiofilm and antibacterial properties against two Gram-positive human pathogens, which are Listeria monocytogenes and Staphylococcus aureus. RESULTS: The anti-biofilm activities of ZnO, SnO2 and CeO2 NPs against S. aureus and L. monocytogenes were assayed by crystal violet staining and confirmed by microscopic visualization using SEM. The synthesis of amyloid protein by S. aureus and exopolysaccharide by L. monocytogenes in the presence of ZnO, SnO2 and CeO2 NPs was evaluated by Congo red assay. DISCUSSION: Results have shown that ZnO, SnO2 and CeO2 NPs effectively inhibited biofilm formation of both L. monocytogenes and S. aureus. The microscopic analysis also confirmed the antibiofilm activity of these NPs. It was also found that only ZnO NPs inhibited cell growth as well as the production of amyloid protein in S. aureus. CONCLUSION: Overall, these results indicated that ZnO, SnO2 and CeO2 NPs can be considered as potential agents for treating the infections caused by L. monocytogenes and S. aureus, especially those associated with biofilm formation. Based on the present study, further studies are required to understand their mechanisms at both phenotypic and molecular levels, as well as their in vivo cytotoxicity, thereby enabling the applications of these metal oxide NPs in biomedical fields and food industry.

Electrocatalytic synthesis of black tin oxide nanomaterial as photothermal agent for cancer therapy.

Photothermal therapy (PTT) is among the popular approach for treating solid tumours. The rapid killing of cancer cells under the influence of infrared radiation by a rapid increase in the temperature of the remote area now demands external agents with high photothermal transduction efficiency (PTE). Despite their improved PTE, black nanomaterials such as black phosphorus and titanium oxide are unable to meet the challenges in the physiological conditions. To address this major concern, we have developed black tin oxide (bSnO) with enhanced capabilities to respond in the physiological milieu. To make the synthesis cost-effective and eco-friendly, we have used electrochemical oxidation at 5 V and 100 mA to achieve ∼15 nm nanoparticle of bSnO. The as-synthesized bSnO exhibited high NIR absorption as well as high photothermal transduction efficiency. To circumvent the low aqueous solubility and photostability, bSnO was functionalized with polyethyleneimine (PEI). Upon exposure to 808 nm laser for ∼8-10 min, the temperature of the bSnO@PEI solution reached ∼58.5 °C. PTE of bSnO@PEI was calculated to be 51.2%. Owing to its high biological compatibility, tin offers relatively better stability when exposed to cancer cells in vitro and in vivo. In comparison to other black nanomaterials, bSnO@PEI was found to exhibit better response under NIR irradiance for non-invasive photothermal therapy of cancer.

Influence of pure fluorides and stannous ions on the initial bacterial colonization in situ.

The present clinical-experimental study aims to examine the effect of pure experimental fluoride solutions and stannous chloride on the initial oral bioadhesion under in situ conditions. After 1 min of pellicle formation on bovine enamel slabs, 12 subjects rinsed with 8 ml of the fluoride test solutions (NaF, Na2PO3F, AmF, SnF2,) with 500 ppm fluoride concentration each for 1 min. Additionally, rinsing without a solution (control) and rinsing with 1563 ppm SnCl2 solution took place for 1 min. Afterwards, fluorescence microscopy took place to visualize bacterial adhesion and glucan formation (8 h oral exposition) with DAPI and ConA and the BacLight method. TEM was performed to visualize the pellicle ultrastructure together with EDX to detect stannous ions. The rinsing solutions with pure SnF2 and SnCl2 reduced significantly the initial bacterial colonization (DAPI). While, NaF and Na2PO3F showed no significant effect compared to the control. There was no significant difference between AmF, SnF2 and SnCl2. All tested experimental solutions showed no reducing effect on the glucan formation. Considerable alterations of the pellicle ultrastructure resulted from rinsing with the Sn-containing solutions. SnF2 appears to be the most effective type of fluoride to reduce initial bacterial colonization in situ. The observed effects primarily have to be attributed to the stannous ions' content.