The impact of ozone treatment on the removal effectiveness of various refractory compounds in wastewater from petroleum refineries.

Large volumes of wastewater are generated during petroleum refining processes. Petroleum refinery wastewater (PRW) can contain highly toxic compounds that can harm the environment. These toxic compounds can be a challenge in biological treatment technologies due to the effects of these compounds on microorganisms. These challenges can be overcome by using ozone (O3) as a standalone or as a pretreatment to the biological treatment. Ozone was used in this study to degrade the organic pollutants in the heavily contaminated PRW from a refinery in Mpumalanga province of South Africa. The objective was achieved by treating the raw PRW using ozone at different ozone treatment times (15, 30, 45, and 60 min) at a fixed ozone concentration of 3.53 mg/dm3. The ozone treatment was carried out in a 2-liter custom-designed plexiglass cylindrical reactor. Ozone was generated from an Eco-Lab-24 corona discharge ozone generator using clean, dry air from the Afrox air cylinder as feed. The chemical oxygen demand, gas chromatograph characterization, and pH analysis were performed on the pretreated and post-treated PRW samples to ascertain the impact of the ozone treatment. The ozone treatment was effective in reducing the benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds in the PRW. The 60-min ozone treatment of different BTEX pollutants in the PRW resulted in the following percentage reduction: benzene 95%, toluene 77%, m + p-xylene 70%, ethylbenzene 69%, and o-xylene 65%. This study has shown the success of using ozone in reducing the toxic BTEX compounds in a heavily contaminated PRW.

Rapid determination of hippuric acid as an exposure biomarker of toluene using a colorimetric assay and comparison with high-performance liquid chromatography.

Occupational exposure to toluene is associated with health risks that require reliable monitoring methods. Hippuric acid (HA), a urinary metabolite of toluene, serves as a valuable biomarker for such exposure. Colorimetric methods for the quantitative determination of HA have gained prominence due to their simplicity, cost-effectiveness, and suitability for field application. In the present study, a simple colorimetric technique was optimized for the determination of HA in the urine sample, and compared with a usual HPLC technique. The central composite design (CCD) was applied to examine the effective parameters on the colorimetric determination of HA. The calibration curve for HA was established within the concentration range of 6 to 100 mg L-1 with R2 = 0.97. The detection limit (LOD) and quantification limit (LOQ) were determined to be 1.8 mg L-1 and 6 mg L-1 respectively. The relative standard deviation (RSD%) was less than 5%, and the recovery% (R%) was 90.5-100.1. The overall results showed good agreement between the colorimetric and HPLC results. There was a significant relationship between the results obtained from HPLC and colorimetric methods especially for higher concentration levels of HA (≥ 500 mg/g creatinine). In conclusion, our optimized colorimetric method is a simple, cost-effective, and rapid method for determination of HA in occupational exposure, which is comparable with the HPLC technique.

Evaluating workplace protection factors (WPFs) of different firefighter PPE interface control measures for select volatile organic compounds (VOCs).

Structural firefighters are exposed to a complex set of contaminants and combustion byproducts, including volatile organic compounds (VOCs). Additionally, recent studies have found structural firefighters' skin may be exposed to multiple chemical compounds via permeation or penetration of chemical byproducts through or around personal protective equipment (PPE). This mannequin-based study evaluated the effectiveness of four different PPE conditions with varying contamination control measures (incorporating PPE interface design features and particulate blocking materials) to protect against ingress of several VOCs in a smoke exposure chamber. We also investigated the effectiveness of long-sleeve base layer clothing to provide additional protection against skin contamination. Outside gear air concentrations were measured from within the smoke exposure chamber at the breathing zone, abdomen, and thigh heights. Personal air concentrations were collected from mannequins under PPE at the same general heights and under the base layer at abdomen and thigh heights. Sampled contaminants included benzene, toluene, styrene, and naphthalene. Results suggest that VOCs can readily penetrate the ensembles. Workplace protection factors (WPFs) were near one for benzene and toluene and increased with increasing molecular weight of the contaminants. WPFs were generally lower under hoods and jackets compared to under pants. For all PPE conditions, the pants appeared to provide the greatest overall protection against ingress of VOCs, but this may be due in part to the lower air concentrations toward the floor (and cuffs of pants) relative to the thigh-height outside gear concentrations used in calculating the WPFs. Providing added interface control measures and adding particulate-blocking materials appeared to provide a protective benefit against less-volatile chemicals, like naphthalene and styrene.

Exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) at Nigeria's petrol stations: a review of current status, challenges and future directions.

Introduction: In Nigeria, because of increasing population, urbanization, industrialization, and auto-mobilization, petrol is the most everyday non-edible commodity, and it is the leading petroleum product traded at the proliferating Nigeria's petrol stations (NPSs). However, because of inadequate occupational health and safety (OHS) regulatory measures, working at NPSs exposes petrol station workers (PSWs) to a large amount of hazardous benzene, toluene, ethylbenzene, and xylene (BTEX) compounds. Methods: Studies on BTEX exposures among Nigerian PSWs are scarce. Thus, constraints in quantifying the health risks of BTEX limit stakeholders' ability to design practical risk assessment and risk control strategies. This paper reviews studies on the OHS of Nigerian PSWs at the NPSs. Results: Although knowledge, attitude, and practices on OHS in NPSs vary from one Nigeria's study setting to another, generally, safety practices, awareness about hazards and personal protective equipment (PPE), and the use of PPE among PSWs fell below expectations. Additionally, air quality at NPSs was poor, with a high content of BTEX and levels of carbon monoxide, hydrogen sulfide, particulate matter, and formaldehyde higher than the World Health Organization guideline limits. Discussion: Currently, regulatory bodies' effectiveness and accountability in safeguarding OHS at NPSs leave much to be desired. Understanding the OHS of NPSs would inform future initiatives, policies, and regulations that would promote the health and safety of workers at NPSs. However, further studies need to be conducted to describe the vulnerability of PSWs and other Nigerians who are occupationally exposed to BTEX pollution. More importantly, controlling air pollution from hazardous air pollutants like BTEX is an essential component of OHS and integral to attaining the Sustainable Development Goals (SDG) 3, 7, and 11.

The Impact of Environmental Benzene, Toluene, Ethylbenzene, and Xylene Exposure on Blood-Based DNA Methylation Profiles in Pregnant African American Women from Detroit.

African American women in the United States have a high risk of adverse pregnancy outcomes. DNA methylation is a potential mechanism by which exposure to BTEX (benzene, toluene, ethylbenzene, and xylenes) may cause adverse pregnancy outcomes. Data are from the Maternal Stress Study, which recruited African American women in the second trimester of pregnancy from February 2009 to June 2010. DNA methylation was measured in archived DNA from venous blood collected in the second trimester. Trimester-specific exposure to airshed BTEX was estimated using maternal self-reported addresses and geospatial models of ambient air pollution developed as part of the Geospatial Determinants of Health Outcomes Consortium. Among the 64 women with exposure and outcome data available, 46 differentially methylated regions (DMRs) were associated with BTEX exposure (FDR adjusted p-value < 0.05) using a DMR-based epigenome-wide association study approach. Overall, 89% of DMRs consistently exhibited hypomethylation with increasing BTEX exposure. Biological pathway analysis identified 11 enriched pathways, with the top 3 involving gamma-aminobutyric acid receptor signaling, oxytocin in brain signaling, and the gustation pathway. These findings highlight the potential impact of BTEX on DNA methylation in pregnant women.

Investigation on the source of VOCs emission from indoor construction materials using electronic sensors and TD-GC-MS.

Indoor air quality (IAQ) is critical to the health and wellbeing of people. As the majority of people spend greater amounts of time indoors, either in office spaces or households, the level of air pollutants in such environments is critical. Building materials and furniture are known sources of air pollutants such as Volatile Organic Compounds (VOCs) and may be associated with discomfort, detrimental health of the occupants, etc. In this study, the VOCs found in a brand new office complex were monitored over a period of 6 months, with an emphasis on monitoring and quantifying harmful VOCs and identifying their emission source. Air samples were taken from a closed, unoccupied office space on a weekly basis and analysed using Thermal Desorption-Gas Chromatography-Mass Spectrometry (TD-GC-MS), while continuous monitoring of the air quality was performed using two commercially available IAQ sensors. To identify the source of the emitted VOCs, pieces of all construction material that were used in the office, including flooring, finished wall material, and adhesive glues, were removed, and placed in air-tight glass containers prior to analysis confirming that the source of VOCs is indeed the flooring. Identified compounds included mainly material origin VOCs such as BTEX (benzene, toluene, ethylbenzene, xylene) and styrene, but also common VOCs such as acetone and propan-2-ol. Of significant importance was the concentration of toluene that was found to be the most abundant VOC in both the flooring material and the indoor air.

Determination of the oil absorption value of inorganic powder by tracer-assisted headspace gas chromatography.

This paper reports a method for determining the oil absorption value of inorganic powder based on tracer-assisted headspace gas chromatographic (HS-GC) technique. The method was carried out by adding 25 µL droplet of toluene-Dioctyl Phthalate solution onto the surface of 1.0 g inorganic powder, then sealing the headspace vial and shaking it to make the powder spherical. The amount of toluene that not been adsorbed by inorganic powder was quantified using HS-GC with the optimal equilibrium temperature and time conditions of 100 °C and 7 min, respectively. A new mathematical model shows that the oil absorption value can be determined from the signal of toluene. The results show that the employed method has good precision (the relative standard deviation < 3.6 %) and accuracy (R2 = 0.993). This method is simple and accurate, and can be an reliable tool for testing the oil absorption value of inorganic powder sample.

Efficient Photothermal Catalytic Oxidation Enabled by Three-Dimensional Nanochannel Substrates.

Photothermal catalysis exhibits promising prospects to overcome the shortcomings of high-energy consumption of traditional thermal catalysis and the low efficiency of photocatalysis. However, there is still a challenge to develop catalysts with outstanding light absorption capability and photothermal conversion efficiency for the degradation of atmospheric pollutants. Herein, we introduced the Co3O4 layer and Pt nanoclusters into the three-dimensional (3D) porous membrane through the atomic layer deposition (ALD) technique, leading to a Pt/Co3O4/AAO monolithic catalyst. The 3D ordered nanochannel structure can significantly enhance the solar absorption capacity through the light-trapping effect. Therefore, the embedded Pt/Co3O4 catalyst can be rapidly heated and the O2 adsorbed on the Pt clusters can be activated to generate sufficient O2- species, exhibiting outstanding activity for the diverse VOCs (toluene, acetone, and formaldehyde) degradation. Optical characterization and simulation calculation confirmed that Pt/Co3O4/AAO exhibited state-of-the-art light absorption and a notable localized surface plasmon resonance (LSPR) effect. In situ diffuse reflectance infrared Fourier transform spectrometry (in situ DRIFTS) studies demonstrated that light irradiation can accelerate the conversion of intermediates during toluene and acetone oxidation, thereby inhibiting byproduct accumulation. Our finding extends the application of AAO's optical properties in photothermal catalytic degradation of air pollutants.

Constructing surface oxygen defects at CuO-Co3O4 interface to boost toluene oxidation over CuO/Co3O4 catalysts.

As a typical heterogeneous catalytic process, the catalytic combustion of toluene over Co3O4-based catalysts is strongly depends on the surface properties of catalysts, especially the concentration of surface oxygen defects. Here, a novel way was proposed to construct chemically bonded CuO-Co3O4 interface by chemical deposition of CuO onto Co3O4 nanoflowers. The interfacial refinement effect between CuO and Co3O4 support disrupted the ordered atomic arrangement and created countless unsaturated coordination sites at CuO-Co3O4 interface, inducing a significant generation of surface oxygen defects. Surface-rich oxygen vacancies enhanced the capacity of 20%CuO/Co3O4-R to adsorb and activate oxygen species. Benefiting from this, 90 % toluene conversion was reached at 228 °C over 20%CuO/Co3O4-R, which was much lower than that over 20%CuO/Co3O4-S prepared by impregnation method and CuO/Co3O4-mix obtained by mechanically mixing way. In-situ DRIFTS analysis revealed that toluene could be directly decomposed into benzaldehyde at the highly defective CuO-Co3O4 interface, leading to toluene oxidation following the path of toluene → benzaldehyde → benzoate → maleic anhydride → water and carbon dioxide over 20%CuO/Co3O4-R, which was significantly different from decomposition mechanism over 20%CuO/Co3O4-S. Additionally, 20%CuO/Co3O4-R displayed terrific recyclability and outstanding stability, showing good application potential.

Ambient air pollutants and breast cancer stage in Tehran, Iran.

This study aimed to examine the impacts of single and multiple air pollutants (AP) on the severity of breast cancer (BC). Data of 1148 diagnosed BC cases (2008-2016) were obtained from the Cancer Research Center and private oncologist offices in Tehran, Iran. Ambient PM10, SO2, NO, NO2, NOX, benzene, toluene, ethylbenzene, m-xylene, p-xylene, o-xylene, and BTEX data were obtained from previously developed land use regression models. Associations between pollutants and stage of BC were assessed by multinomial logistic regression models. An increase of 10 µg/m3 in ethylbenzene, o-xylene, m-xylene, and 10 ppb of NO corresponded to 10.41 (95% CI 1.32-82.41), 4.07 (1.46-11.33), 2.89 (1.08-7.73) and 1.08 (1.00-1.15) increase in the odds of stage I versus non-invasive BC, respectively. Benzene (OR, odds ratio = 1.16, 95% CI 1.01-1.33) and o-xylene (OR = 1.18, 1.02-1.38) were associated with increased odds of incidence of BC stages III & IV versus non-invasive stages. BC stage I and stage III&IV in women living in low SES areas was associated with significantly higher levels of benzene, ethylbenzene, o-xylene, and m-xylene. The highest multiple-air-pollutants quartile was associated with a higher odds of stage I BC (OR = 3.16) in patients under 50 years old. This study provides evidence that exposure to AP is associated with increased BC stage at diagnosis, especially under premenopause age.

Natural attenuation of BTEX and chlorobenzenes in a formerly contaminated pesticide site in China: Examining kinetics, mechanisms, and isotopes analysis.

Groundwater contamination from abandoned pesticide sites is a prevalent issue in China. To address this problem, natural attenuation (NA) of pollutants has been increasingly employed as a management strategy for abandoned pesticide sites. However, limited studies have focused on the long-term NA process of co-existing organic pollutants in abandoned pesticide sites by an integrated approach. In this study, the NA of benzene, toluene, ethylbenzene, and xylene (BTEX), and chlorobenzenes (CBs) in groundwater of a retired industry in China was systematically investigated during the monitoring period from June 2016 to December 2021. The findings revealed that concentrations of BTEX and CBs were effectively reduced, and their NA followed first-order kinetics with different rate constants. The sulfate-reducing bacteria, nitrate-reducing bacteria, fermenting bacteria, aromatic hydrocarbon metabolizing bacteria, and reductive dechlorinating bacteria were detected in groundwater. It was observed that distinct environmental parameters played a role in shaping both overall and key bacterial communities. ORP (14.72%) and BTEX (12.89%) were the main drivers for variations of the whole and key functional microbial community, respectively. Moreover, BTEX accelerated reductive dechlorination. Furthermore, BTEX and CBs exhibited significant enrichment of 13C, ranging from +2.9 to +27.3‰, demonstrating their significance in situ biodegradation. This study provides a scientific basis for site management.

Co-exposure of petrochemical workers to noise and mixture of benzene, toluene, ethylbenzene, xylene, and styrene: Impact on mild renal impairment and interaction.

Epidemiological evidence concerning effects of simultaneous exposure to noise and benzene, toluene, ethylbenzene, xylene, and styrene (BTEXS) on renal function remains uncertain. In 2020, a cross-sectional study was conducted among 1160 petrochemical workers in southern China to investigate effects of their co-exposure on estimated glomerular filtration rate (eGFR) and mild renal impairment (MRI). Noise levels were assessed using cumulative noise exposure (CNE). Urinary biomarkers for BTEXS were quantified. We found the majority of workers had exposure levels to noise and BTEXS below China's occupational exposure limits. CNE, trans, trans-muconic acid (tt-MA), and the sum of mandelic acid and phenylglyoxylic acid (PGMA) were linearly associated with decreased eGFR and increased MRI risk. We observed U-shaped associations for both N-acetyl-S-phenyl-L-cysteine (SPMA) and o-methylhippuric acid (2-MHA) with MRI. In further assessing the joint effect of BTEXS (ß, -0.164 [95% CI, -0.296 to -0.033]) per quartile increase in all BTEXS metabolites on eGFR using quantile g-computation models, we found SPMA, tt-MA, 2-MHA, and PGMA played pivotal roles. Additionally, the risk of MRI associated with tt-MA was more pronounced in workers with lower CNE levels (P = 0.004). Multiplicative interaction analysis revealed antagonisms of CNE and PGMA on MRI risk (P = 0.034). Thus, our findings reveal negative dose-effect associations between noise and BTEXS mixture exposure and renal function in petrochemical workers. With the exception of toluene, benzene, xylene, ethylbenzene, and styrene are all concerning pollutants for renal dysfunction. Effects of benzene, ethylbenzene, and styrene exposure on renal dysfunction were more pronounced in workers with lower CNE.

Exposure to BTEX is associated with cardiovascular disease, dyslipidemia and leukocytosis in national US population.

BACKGROUND: Comprehensive research on the effects of individual benzene, toluene, ethylbenzene, and xylenes (BTEX) and their mixture measured in blood samples, on cardiovascular diseases (CVD) and related risk factors among the general population is limited. OBJECTIVES: To investigate the effects of blood individual and mixed BTEX on total CVD and its subtypes, lipid profiles, and white blood cell (WBC) count. METHODS: Survey-weighted multivariate logistic regression was used to examine the associations between blood individual and mixed BTEX with CVD and its subtypes in 17,007 participants from NHANES 1999-2018. The combined effect of BTEX mixture on CVD was estimated using weighted quantile sum modeling and quantile g-computation. Weighted multivariate linear regression assessed the effects of BTEX on lipid profiles and WBC, including its five-part differential count. RESULTS: In comparison to the reference quartile of BTEX mixture, individuals in the highest quartile had a significantly increased adjusted odds ratio of CVD risk (1.64, 95 % CI: 1.23 to 2.19, P for trend = 0.008). Positive associations were observed for benzene, toluene, ethylbenzene, and m-/p-xylene, demonstrating a monotonically increasing exposure-response relationship. Mixed BTEX was associated with congestive heart failure (CHF), angina pectoris, and heart attack. Individual benzene, toluene, and ethylbenzene were associated with CHF, while toluene, ethylbenzene, and all xylene isomers were linked to angina pectoris. Benzene, toluene, and o-xylene were associated with heart attack. Both mixed and individual BTEX showed positive associations with triglycerides, cholesterol, low-density lipoprotein, and WBC, including its five-part differential count, but a negative relationship with high-density lipoprotein. Subgroup analyses identified modifying effects of smoking, drinking, exercise, BMI, hypertension, and diabetes on the associations between specific toxicants and CVD risk. CONCLUSIONS: Exposure to BTEX was associated with cardiovascular diseases and cardiovascular risk factors. These findings emphasize the importance of considering blood BTEX levels when assessing cardiovascular health risks.

Coagulation-centered three-step approach for removing by-product organic pollutants from tetrabromobisphenol A industrial wastewater: Experimental and theoretic investigations.

The challenge of meeting discharge standards for tetrabromobisphenol A (TBBPA) production wastewater, characterized by high concentrations of organic by-products, necessitates effective treatment methods. This study identifies 2,4-dibromophenol, 2,6-dibromophenol, 2,4,6-tribromophenol, chlorobenzene, and toluene as the primary organic by-product pollutants. A coagulation-centered three-step approach was established for TBBPA industrial wastewater treatment. The initial step involves acidification treatment to exploit the reduced solubility of 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol under acidic conditions, with the optimal pH determined as 2.7-3.1. An acid-activated montmorillonite coagulant (AMC), prepared through roasting and high-pressure acid leaching, exhibits a distinctive "Core-shell" structure, contributing significantly to the combined coagulation and adsorption mechanism. The acid-soluble aluminum salts in AMC form positively charged flocs, electrostatically attracting negatively charged organic compounds in the wastewater. Simultaneously, the porous insoluble silicon framework displays strong adsorption capacity for pollutants. The removal efficiencies for toluene, chlorobenzene, 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol reached 88.2%, 89.1%, 88.8%, 87.1%, and 89.4%, respectively. Elemental analysis reveals that the coloration of the wastewater stems from complexation reactions between phenolic compounds and Fe3+, originating from the corrosion of iron or steel reaction vessel. Post-treatment with cation exchange resin resulted in removal efficiencies of 5.2%, 59.1%, 80.2%, 77.9%, and 88.3% for the five substances, respectively. This study outlines a crucial pathway for the effective purification of TBBPA wastewater.

The removal of toluene by thermoscatalytic oxidation using CeO2-based catalysts:a review.

Volatile organic compounds (VOCs) pose a serious threat to human health and the ecological environment. Thermal catalytic oxidation based on cerium dioxide based (CeO2-based) catalysts is widely used in the degradation of toluene. However, new problems and challenges such as how to reduce the energy consumption during catalytic oxidation, improve the anti-poisoning performance of catalysts, and enhance the multi-species synergistic catalytic ability of catalysts continue to emerge. On this basis, we systematically summarize the current status of research progress on the thermocatalytic oxidation of toluene based on CeO2-based catalysts. Firstly, we summarized the rules on how to improve the catalytic performance and anti-poisoning performance of CeO2-based catalysts; Secondly, we discussed the effect of light reaction conditions on the thermal coupled catalytic oxidation of toluene; In addition to this, we explored the current status of synergistic multi-pollutant degradation, mainly of toluene; Finally, we summarized the mechanism of catalytic oxidation of toluene by combining theoretical simulation calculations, in-situ infrared analyses, and other means. We present the promising applications of CeO2-based catalysts in the catalytic oxidation of toluene, and hope that these summaries will provide an important reference for the catalytic treatment of VOCs.

Low-level occupational exposure to BTEX and dyschromatopsia: a systematic review and meta-analysis.

Objectives. The present study aimed to assess whether occupational exposure to low concentrations of benzene, toluene, ethylbenzene and xylene (BTEX) is associated with color vision impairment. Methods. We queried PubMed, Scopus, Embase, Web of Science and ProQuest as the main databases, as well as gray literature such as Google Scholar. A random-effects model was used to assess relative risk. A funnel plot was created to assess publication bias. Meta-regression analysis was applied to identify variables that explain the between-study variation in the reported risk estimate. Results. An overall standardized mean difference of 0.529 (95% confidence interval [0.269, 0.788]; p < 0.0001) was obtained in the random-effects model, which corresponded to a medium-size effect. Duration and the levels of exposure to benzene, toluene and xylene were the significant predictors of the magnitude of the combined risk estimate. Chronic exposure to low levels of BTEX was associated with dyschromatopsia determined by the color confusion index. Conclusions. The impairments can occur even at exposures lower than the occupational exposure limits of BTEX. However, there are several flaws in the determination of workers' exposure, which did not allow to establish how low a level of these chemicals can cause color vision impairment.

Removal of toluene via non-thermal plasma generated by applying rare-earth tungsten electrode and nanosecond pulsed power supply.

The objective of this investigation is to evaluate the characteristics associated with degradation of toluene through the utilization of non-thermal plasma (NTP) generated via application of a low-work-function electrode and nanosecond pulsed power supply. Initially, a comparative analysis is made between toluene removal efficiency utilizing the low-work-function electrode and that achieved with the conventional stainless-steel electrode. The outcomes demonstrate that NTP generated by the low-work-function electrode exhibits markedly superior removal efficiency for toluene in comparison to the stainless-steel electrode operating at the same voltage. Subsequently, the impacts of voltage, pulse frequency, and initial concentration of toluene on the removal efficiency and production of by-products are investigated. It is found that as the voltage and frequency increase, the removal efficiency also increases, and a maximum toluene removal efficiency of 87.2% is achieved at a voltage of 12,000 V and pulse frequency of 2000 Hz. The removal efficiency first increases and then decreases with increasing toluene initial concentration. The investigation also finds that energy yield is negatively correlated with voltage and pulse frequency and positively correlated with the initial concentration. Finally, the reaction products were subjected to quantitative analysis using GC-MS. Based on the analysis results, potential reaction pathways are inferred.

Health risk assessment of exposure to benzene, toluene, ethyl benzene, and xylene in shoe industry-related workplaces.

Benzene, toluene, ethyl benzene, and xylene (BTEX) are prevalent pollutants in shoe industry-related workplaces. The aim of this study was to assess exposure to BTEX and their carcinogenic and non-carcinogenic risks in shoe-industry-related workplaces. This study was carried out at different shoe manufactures, small shoe workshop units, shoe markets, and shoe stores in Tabriz, Iran in 2021. Personal inhalation exposure to BTEX was measured using the National Institute for Occupational Safety and Health (NIOSH) 1501 method. Carcinogenic and non-carcinogenic risks due to inhalation exposure to BTEX were estimated by United States Environmental Protection Agency (U.S. EPA) method based on Mont Carlo simulation. Results showed that the concentrations of benzene and toluene were higher than the threshold limit value (TLV) in both gluing and non-gluing units of shoe manufactures. The total carcinogenic risk (TCR) due to exposure to benzene and ethyl benzene was considerable in all shoe industry-related workplaces. Also, the hazard index (HI) as a non-carcinogenic index was higher than standard levels in all shoe industry-related workplaces. Therefore, shoe industry-related workers are at cancer and non-cancer risks due to exposure to BTEX. Prevention measures need to be implemented to reduce the concentration of BTEX in shoe industry-related workplaces.

Effect of toluene on m-xylene removal in a biotrickling filter: Performance, biofilm characteristics, and microbial analysis.

Hydrophobic volatile organic compounds (VOCs) pose a challenge to the removal efficiency in biotrickling filters (BTFs). The addition of relatively hydrophilic substances presents a promising approach for enhancing the elimination of hydrophobic VOCs. In this study, toluene was introduced into the BTF system alongside m-xylene, and their mixing ratios were changed to explore the interactions and mechanisms under different conditions. The result showed that the most pronounced synergistic interaction occurred when the mixing concentration ratio of m-xylene and toluene was 2:1. The removal efficiency (RE) of m-xylene increased from 88% to 97%, and the elimination capacity (EC) of m-xylene changed from 64 to 72 g m-3 h-1. Under this condition, there was a notable increase in biomass, extracellular polymeric substance (EPS) content, and relative hydrophobicity. Microbial diversity was enhanced observably with Berkeleyces and Mycobacterium potentially playing a positive role in co-degradation. Meanwhile, microbial metabolic function prediction indicated a significant enhancement in metabolic functions. Therefore, the introduction of relatively hydrophilic VOCs represents an effective strategy for enhancing the removal of hydrophobic VOCs in the BTFs.

Off-gassing from firefighter suits (nomex) as an indoor source of BTEXS.

The clothes and special equipment of firefighters can be a source of indoor air pollution. Nevertheless, it has not been investigated so far what the scale of the release of various compounds from such materials into the indoor air can be. The following study analysed the results of an experiment involving the passive measurement of concentrations of selected compounds, i.a. benzene, toluene, ethylbenzene, m,p-xylene, o-xylene, styrene, isopropylbenzene and n-propylbenzene (BTEXS) in the air of a room where firefighters' special clothing, which had been previously exposed to emissions from simulated fires, was stored. The study included simulations of fires involving three materials: wood, processed wood (OSB/fibreboard) and a mixture of plastics. After being exposed to the simulated fire environment, special clothing (so-called nomex) was placed in a sealed chamber, where passive collection of BTEXS was carried out using tube-type axial passive samplers and a gas chromatograph. Irrespective of which burned material special clothing was exposed to, the compound emitted into the air most intensively was toluene. Its rate of release from a single nomex ranges from 4.4 to 28.6 µg h-1, while the corresponding rates for the sum of BTEXS are between 9.97 and 44.29 µg h-1.